Revision be0f272bfc83797f70d44faca86954df62e2bbc0 authored by Ard Biesheuvel on 20 November 2017, 17:41:30 UTC, committed by Will Deacon on 01 December 2017, 13:04:59 UTC
When building the arm64 kernel with both CONFIG_ARM64_MODULE_PLTS and
CONFIG_DYNAMIC_FTRACE enabled, the ftrace-mod.o object file is built
with the kernel and contains a trampoline that is linked into each
module, so that modules can be loaded far away from the kernel and
still reach the ftrace entry point in the core kernel with an ordinary
relative branch, as is emitted by the compiler instrumentation code
dynamic ftrace relies on.

In order to be able to build out of tree modules, this object file
needs to be included into the linux-headers or linux-devel packages,
which is undesirable, as it makes arm64 a special case (although a
precedent does exist for 32-bit PPC).

Given that the trampoline essentially consists of a PLT entry, let's
not bother with a source or object file for it, and simply patch it
in whenever the trampoline is being populated, using the existing
PLT support routines.

Cc: <stable@vger.kernel.org>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
1 parent 7e8b9c1
Raw File
tags.sh
#!/bin/bash
# Generate tags or cscope files
# Usage tags.sh <mode>
#
# mode may be any of: tags, TAGS, cscope
#
# Uses the following environment variables:
# ARCH, SUBARCH, SRCARCH, srctree, src, obj

if [ "$KBUILD_VERBOSE" = "1" ]; then
	set -x
fi

# RCS_FIND_IGNORE has escaped ()s -- remove them.
ignore="$(echo "$RCS_FIND_IGNORE" | sed 's|\\||g' )"
# tags and cscope files should also ignore MODVERSION *.mod.c files
ignore="$ignore ( -name *.mod.c ) -prune -o"

# Do not use full path if we do not use O=.. builds
# Use make O=. {tags|cscope}
# to force full paths for a non-O= build
if [ "${KBUILD_SRC}" = "" ]; then
	tree=
else
	tree=${srctree}/
fi

# ignore userspace tools
ignore="$ignore ( -path ${tree}tools ) -prune -o"

# Find all available archs
find_all_archs()
{
	ALLSOURCE_ARCHS=""
	for arch in `ls ${tree}arch`; do
		ALLSOURCE_ARCHS="${ALLSOURCE_ARCHS} "${arch##\/}
	done
}

# Detect if ALLSOURCE_ARCHS is set. If not, we assume SRCARCH
if [ "${ALLSOURCE_ARCHS}" = "" ]; then
	ALLSOURCE_ARCHS=${SRCARCH}
elif [ "${ALLSOURCE_ARCHS}" = "all" ]; then
	find_all_archs
fi

# find sources in arch/$ARCH
find_arch_sources()
{
	for i in $archincludedir; do
		prune="$prune -wholename $i -prune -o"
	done
	find ${tree}arch/$1 $ignore $subarchprune $prune -name "$2" \
		-not -type l -print;
}

# find sources in arch/$1/include
find_arch_include_sources()
{
	include=$(find ${tree}arch/$1/ $subarchprune \
					-name include -type d -print);
	if [ -n "$include" ]; then
		archincludedir="$archincludedir $include"
		find $include $ignore -name "$2" -not -type l -print;
	fi
}

# find sources in include/
find_include_sources()
{
	find ${tree}include $ignore -name config -prune -o -name "$1" \
		-not -type l -print;
}

# find sources in rest of tree
# we could benefit from a list of dirs to search in here
find_other_sources()
{
	find ${tree}* $ignore \
	     \( -name include -o -name arch -o -name '.tmp_*' \) -prune -o \
	       -name "$1" -not -type l -print;
}

find_sources()
{
	find_arch_sources $1 "$2"
}

all_sources()
{
	find_arch_include_sources ${SRCARCH} '*.[chS]'
	if [ ! -z "$archinclude" ]; then
		find_arch_include_sources $archinclude '*.[chS]'
	fi
	find_include_sources '*.[chS]'
	for arch in $ALLSOURCE_ARCHS
	do
		find_sources $arch '*.[chS]'
	done
	find_other_sources '*.[chS]'
}

all_compiled_sources()
{
	for i in $(all_sources); do
		case "$i" in
			*.[cS])
				j=${i/\.[cS]/\.o}
				j="${j#$tree}"
				if [ -e $j ]; then
					echo $i
				fi
				;;
			*)
				echo $i
				;;
		esac
	done
}

all_target_sources()
{
	if [ -n "$COMPILED_SOURCE" ]; then
		all_compiled_sources
	else
		all_sources
	fi
}

all_kconfigs()
{
	find ${tree}arch/ -maxdepth 1 $ignore \
	       -name "Kconfig*" -not -type l -print;
	for arch in $ALLSOURCE_ARCHS; do
		find_sources $arch 'Kconfig*'
	done
	find_other_sources 'Kconfig*'
}

docscope()
{
	(echo \-k; echo \-q; all_target_sources) > cscope.files
	cscope -b -f cscope.out
}

dogtags()
{
	all_target_sources | gtags -i -f -
}

# Basic regular expressions with an optional /kind-spec/ for ctags and
# the following limitations:
# - No regex modifiers
# - Use \{0,1\} instead of \?, because etags expects an unescaped ?
# - \s is not working with etags, use a space or [ \t]
# - \w works, but does not match underscores in etags
# - etags regular expressions have to match at the start of a line;
#   a ^[^#] is prepended by setup_regex unless an anchor is already present
regex_asm=(
	'/^\(ENTRY\|_GLOBAL\)(\([[:alnum:]_\\]*\)).*/\2/'
)
regex_c=(
	'/^SYSCALL_DEFINE[0-9](\([[:alnum:]_]*\).*/sys_\1/'
	'/^COMPAT_SYSCALL_DEFINE[0-9](\([[:alnum:]_]*\).*/compat_sys_\1/'
	'/^TRACE_EVENT(\([[:alnum:]_]*\).*/trace_\1/'
	'/^TRACE_EVENT(\([[:alnum:]_]*\).*/trace_\1_rcuidle/'
	'/^DEFINE_EVENT([^,)]*, *\([[:alnum:]_]*\).*/trace_\1/'
	'/^DEFINE_EVENT([^,)]*, *\([[:alnum:]_]*\).*/trace_\1_rcuidle/'
	'/^DEFINE_INSN_CACHE_OPS(\([[:alnum:]_]*\).*/get_\1_slot/'
	'/^DEFINE_INSN_CACHE_OPS(\([[:alnum:]_]*\).*/free_\1_slot/'
	'/^PAGEFLAG(\([[:alnum:]_]*\).*/Page\1/'
	'/^PAGEFLAG(\([[:alnum:]_]*\).*/SetPage\1/'
	'/^PAGEFLAG(\([[:alnum:]_]*\).*/ClearPage\1/'
	'/^TESTSETFLAG(\([[:alnum:]_]*\).*/TestSetPage\1/'
	'/^TESTPAGEFLAG(\([[:alnum:]_]*\).*/Page\1/'
	'/^SETPAGEFLAG(\([[:alnum:]_]*\).*/SetPage\1/'
	'/\<__SETPAGEFLAG(\([[:alnum:]_]*\).*/__SetPage\1/'
	'/\<TESTCLEARFLAG(\([[:alnum:]_]*\).*/TestClearPage\1/'
	'/\<__TESTCLEARFLAG(\([[:alnum:]_]*\).*/TestClearPage\1/'
	'/\<CLEARPAGEFLAG(\([[:alnum:]_]*\).*/ClearPage\1/'
	'/\<__CLEARPAGEFLAG(\([[:alnum:]_]*\).*/__ClearPage\1/'
	'/^__PAGEFLAG(\([[:alnum:]_]*\).*/__SetPage\1/'
	'/^__PAGEFLAG(\([[:alnum:]_]*\).*/__ClearPage\1/'
	'/^PAGEFLAG_FALSE(\([[:alnum:]_]*\).*/Page\1/'
	'/\<TESTSCFLAG(\([[:alnum:]_]*\).*/TestSetPage\1/'
	'/\<TESTSCFLAG(\([[:alnum:]_]*\).*/TestClearPage\1/'
	'/\<SETPAGEFLAG_NOOP(\([[:alnum:]_]*\).*/SetPage\1/'
	'/\<CLEARPAGEFLAG_NOOP(\([[:alnum:]_]*\).*/ClearPage\1/'
	'/\<__CLEARPAGEFLAG_NOOP(\([[:alnum:]_]*\).*/__ClearPage\1/'
	'/\<TESTCLEARFLAG_FALSE(\([[:alnum:]_]*\).*/TestClearPage\1/'
	'/^PAGE_MAPCOUNT_OPS(\([[:alnum:]_]*\).*/Page\1/'
	'/^PAGE_MAPCOUNT_OPS(\([[:alnum:]_]*\).*/__SetPage\1/'
	'/^PAGE_MAPCOUNT_OPS(\([[:alnum:]_]*\).*/__ClearPage\1/'
	'/^TASK_PFA_TEST([^,]*, *\([[:alnum:]_]*\))/task_\1/'
	'/^TASK_PFA_SET([^,]*, *\([[:alnum:]_]*\))/task_set_\1/'
	'/^TASK_PFA_CLEAR([^,]*, *\([[:alnum:]_]*\))/task_clear_\1/'
	'/^DEF_MMIO_\(IN\|OUT\)_[XD](\([[:alnum:]_]*\),[^)]*)/\2/'
	'/^DEBUGGER_BOILERPLATE(\([[:alnum:]_]*\))/\1/'
	'/^DEF_PCI_AC_\(\|NO\)RET(\([[:alnum:]_]*\).*/\2/'
	'/^PCI_OP_READ(\(\w*\).*[1-4])/pci_bus_read_config_\1/'
	'/^PCI_OP_WRITE(\(\w*\).*[1-4])/pci_bus_write_config_\1/'
	'/\<DEFINE_\(MUTEX\|SEMAPHORE\|SPINLOCK\)(\([[:alnum:]_]*\)/\2/v/'
	'/\<DEFINE_\(RAW_SPINLOCK\|RWLOCK\|SEQLOCK\)(\([[:alnum:]_]*\)/\2/v/'
	'/\<DECLARE_\(RWSEM\|COMPLETION\)(\([[:alnum:]_]\+\)/\2/v/'
	'/\<DECLARE_BITMAP(\([[:alnum:]_]*\)/\1/v/'
	'/\(^\|\s\)\(\|L\|H\)LIST_HEAD(\([[:alnum:]_]*\)/\3/v/'
	'/\(^\|\s\)RADIX_TREE(\([[:alnum:]_]*\)/\2/v/'
	'/\<DEFINE_PER_CPU([^,]*, *\([[:alnum:]_]*\)/\1/v/'
	'/\<DEFINE_PER_CPU_SHARED_ALIGNED([^,]*, *\([[:alnum:]_]*\)/\1/v/'
	'/\<DECLARE_WAIT_QUEUE_HEAD(\([[:alnum:]_]*\)/\1/v/'
	'/\<DECLARE_\(TASKLET\|WORK\|DELAYED_WORK\)(\([[:alnum:]_]*\)/\2/v/'
	'/\(^\s\)OFFSET(\([[:alnum:]_]*\)/\2/v/'
	'/\(^\s\)DEFINE(\([[:alnum:]_]*\)/\2/v/'
	'/\<DEFINE_HASHTABLE(\([[:alnum:]_]*\)/\1/v/'
)
regex_kconfig=(
	'/^[[:blank:]]*\(menu\|\)config[[:blank:]]\+\([[:alnum:]_]\+\)/\2/'
	'/^[[:blank:]]*\(menu\|\)config[[:blank:]]\+\([[:alnum:]_]\+\)/CONFIG_\2/'
)
setup_regex()
{
	local mode=$1 lang tmp=() r
	shift

	regex=()
	for lang; do
		case "$lang" in
		asm)       tmp=("${regex_asm[@]}") ;;
		c)         tmp=("${regex_c[@]}") ;;
		kconfig)   tmp=("${regex_kconfig[@]}") ;;
		esac
		for r in "${tmp[@]}"; do
			if test "$mode" = "exuberant"; then
				regex[${#regex[@]}]="--regex-$lang=${r}b"
			else
				# Remove ctags /kind-spec/
				case "$r" in
				/*/*/?/)
					r=${r%?/}
				esac
				# Prepend ^[^#] unless already anchored
				case "$r" in
				/^*) ;;
				*)
					r="/^[^#]*${r#/}"
				esac
				regex[${#regex[@]}]="--regex=$r"
			fi
		done
	done
}

exuberant()
{
	setup_regex exuberant asm c
	all_target_sources | xargs $1 -a                        \
	-I __initdata,__exitdata,__initconst,			\
	-I __initdata_memblock					\
	-I __refdata,__attribute,__maybe_unused,__always_unused \
	-I __acquires,__releases,__deprecated			\
	-I __read_mostly,__aligned,____cacheline_aligned        \
	-I ____cacheline_aligned_in_smp                         \
	-I __cacheline_aligned,__cacheline_aligned_in_smp	\
	-I ____cacheline_internodealigned_in_smp                \
	-I __used,__packed,__packed2__,__must_check,__must_hold	\
	-I EXPORT_SYMBOL,EXPORT_SYMBOL_GPL,ACPI_EXPORT_SYMBOL   \
	-I DEFINE_TRACE,EXPORT_TRACEPOINT_SYMBOL,EXPORT_TRACEPOINT_SYMBOL_GPL \
	-I static,const						\
	--extra=+fq --c-kinds=+px --fields=+iaS --langmap=c:+.h \
	"${regex[@]}"

	setup_regex exuberant kconfig
	all_kconfigs | xargs $1 -a                              \
	--langdef=kconfig --language-force=kconfig "${regex[@]}"

}

emacs()
{
	setup_regex emacs asm c
	all_target_sources | xargs $1 -a "${regex[@]}"

	setup_regex emacs kconfig
	all_kconfigs | xargs $1 -a "${regex[@]}"
}

xtags()
{
	if $1 --version 2>&1 | grep -iq exuberant; then
		exuberant $1
	elif $1 --version 2>&1 | grep -iq emacs; then
		emacs $1
	else
		all_target_sources | xargs $1 -a
	fi
}

# Support um (which uses SUBARCH)
if [ "${ARCH}" = "um" ]; then
	if [ "$SUBARCH" = "i386" ]; then
		archinclude=x86
	elif [ "$SUBARCH" = "x86_64" ]; then
		archinclude=x86
	else
		archinclude=${SUBARCH}
	fi
elif [ "${SRCARCH}" = "arm" -a "${SUBARCH}" != "" ]; then
	subarchdir=$(find ${tree}arch/$SRCARCH/ -name "mach-*" -type d -o \
							-name "plat-*" -type d);
	mach_suffix=$SUBARCH
	plat_suffix=$SUBARCH

	# Special cases when $plat_suffix != $mach_suffix
	case $mach_suffix in
		"omap1" | "omap2")
			plat_suffix="omap"
			;;
	esac

	if [ ! -d ${tree}arch/$SRCARCH/mach-$mach_suffix ]; then
		echo "Warning: arch/arm/mach-$mach_suffix/ not found." >&2
		echo "         Fix your \$SUBARCH appropriately" >&2
	fi

	for i in $subarchdir; do
		case "$i" in
			*"mach-"${mach_suffix})
				;;
			*"plat-"${plat_suffix})
				;;
			*)
				subarchprune="$subarchprune \
						-wholename $i -prune -o"
				;;
		esac
	done
fi

remove_structs=
case "$1" in
	"cscope")
		docscope
		;;

	"gtags")
		dogtags
		;;

	"tags")
		rm -f tags
		xtags ctags
		remove_structs=y
		;;

	"TAGS")
		rm -f TAGS
		xtags etags
		remove_structs=y
		;;
esac

# Remove structure forward declarations.
if [ -n "$remove_structs" ]; then
    LANG=C sed -i -e '/^\([a-zA-Z_][a-zA-Z0-9_]*\)\t.*\t\/\^struct \1;.*\$\/;"\tx$/d' $1
fi
back to top