Revision be4b499323bf7291b491c6df51baae62f45b8404 authored by Erez Shitrit on 25 June 2015, 14:13:22 UTC, committed by Doug Ledford on 14 July 2015, 17:20:09 UTC
Whenever ib_cm gets remove_one call, like when there is a hot-unplug event, the driver should mark itself as going_down and confirm that no new works are going to be queued for that device. so, the order of the actions are: 1. mark the going_down bit. 2. flush the wq. 3. [make sure no new works for that device.] 4. unregister mad agent. otherwise, works that are already queued can be scheduled after the mad agent was freed. Signed-off-by: Erez Shitrit <erezsh@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
1 parent 3fdf70a
video-output.txt
Video Output Switcher Control
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
2006 luming.yu@intel.com
The output sysfs class driver provides an abstract video output layer that
can be used to hook platform specific methods to enable/disable video output
device through common sysfs interface. For example, on my IBM ThinkPad T42
laptop, The ACPI video driver registered its output devices and read/write
method for 'state' with output sysfs class. The user interface under sysfs is:
linux:/sys/class/video_output # tree .
.
|-- CRT0
| |-- device -> ../../../devices/pci0000:00/0000:00:01.0
| |-- state
| |-- subsystem -> ../../../class/video_output
| `-- uevent
|-- DVI0
| |-- device -> ../../../devices/pci0000:00/0000:00:01.0
| |-- state
| |-- subsystem -> ../../../class/video_output
| `-- uevent
|-- LCD0
| |-- device -> ../../../devices/pci0000:00/0000:00:01.0
| |-- state
| |-- subsystem -> ../../../class/video_output
| `-- uevent
`-- TV0
|-- device -> ../../../devices/pci0000:00/0000:00:01.0
|-- state
|-- subsystem -> ../../../class/video_output
`-- uevent
Computing file changes ...
