Revision bfe5424a8b31624e7a476f959d552999f931e7c7 authored by Michal Marek on 09 June 2011, 14:35:41 UTC, committed by Michal Marek on 09 June 2011, 21:05:54 UTC
depmod from module-init-tools < 3.13 and the busybox depmod check if the kernel release starts with <num>.<num>.<num>. To support these versions, we create a symlink with two numbers prepended. Signed-off-by: Michal Marek <mmarek@suse.cz>
1 parent fc4da9a
via_clock.c
/*
* Copyright 1998-2008 VIA Technologies, Inc. All Rights Reserved.
* Copyright 2001-2008 S3 Graphics, Inc. All Rights Reserved.
* Copyright 2011 Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public
* License as published by the Free Software Foundation;
* either version 2, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTIES OR REPRESENTATIONS; without even
* the implied warranty of MERCHANTABILITY or FITNESS FOR
* A PARTICULAR PURPOSE.See the GNU General Public License
* for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc.,
* 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
*/
/*
* clock and PLL management functions
*/
#include <linux/kernel.h>
#include <linux/via-core.h>
#include "via_clock.h"
#include "global.h"
#include "debug.h"
const char *via_slap = "Please slap VIA Technologies to motivate them "
"releasing full documentation for your platform!\n";
static inline u32 cle266_encode_pll(struct via_pll_config pll)
{
return (pll.multiplier << 8)
| (pll.rshift << 6)
| pll.divisor;
}
static inline u32 k800_encode_pll(struct via_pll_config pll)
{
return ((pll.divisor - 2) << 16)
| (pll.rshift << 10)
| (pll.multiplier - 2);
}
static inline u32 vx855_encode_pll(struct via_pll_config pll)
{
return (pll.divisor << 16)
| (pll.rshift << 10)
| pll.multiplier;
}
static inline void cle266_set_primary_pll_encoded(u32 data)
{
via_write_reg_mask(VIASR, 0x40, 0x02, 0x02); /* enable reset */
via_write_reg(VIASR, 0x46, data & 0xFF);
via_write_reg(VIASR, 0x47, (data >> 8) & 0xFF);
via_write_reg_mask(VIASR, 0x40, 0x00, 0x02); /* disable reset */
}
static inline void k800_set_primary_pll_encoded(u32 data)
{
via_write_reg_mask(VIASR, 0x40, 0x02, 0x02); /* enable reset */
via_write_reg(VIASR, 0x44, data & 0xFF);
via_write_reg(VIASR, 0x45, (data >> 8) & 0xFF);
via_write_reg(VIASR, 0x46, (data >> 16) & 0xFF);
via_write_reg_mask(VIASR, 0x40, 0x00, 0x02); /* disable reset */
}
static inline void cle266_set_secondary_pll_encoded(u32 data)
{
via_write_reg_mask(VIASR, 0x40, 0x04, 0x04); /* enable reset */
via_write_reg(VIASR, 0x44, data & 0xFF);
via_write_reg(VIASR, 0x45, (data >> 8) & 0xFF);
via_write_reg_mask(VIASR, 0x40, 0x00, 0x04); /* disable reset */
}
static inline void k800_set_secondary_pll_encoded(u32 data)
{
via_write_reg_mask(VIASR, 0x40, 0x04, 0x04); /* enable reset */
via_write_reg(VIASR, 0x4A, data & 0xFF);
via_write_reg(VIASR, 0x4B, (data >> 8) & 0xFF);
via_write_reg(VIASR, 0x4C, (data >> 16) & 0xFF);
via_write_reg_mask(VIASR, 0x40, 0x00, 0x04); /* disable reset */
}
static inline void set_engine_pll_encoded(u32 data)
{
via_write_reg_mask(VIASR, 0x40, 0x01, 0x01); /* enable reset */
via_write_reg(VIASR, 0x47, data & 0xFF);
via_write_reg(VIASR, 0x48, (data >> 8) & 0xFF);
via_write_reg(VIASR, 0x49, (data >> 16) & 0xFF);
via_write_reg_mask(VIASR, 0x40, 0x00, 0x01); /* disable reset */
}
static void cle266_set_primary_pll(struct via_pll_config config)
{
cle266_set_primary_pll_encoded(cle266_encode_pll(config));
}
static void k800_set_primary_pll(struct via_pll_config config)
{
k800_set_primary_pll_encoded(k800_encode_pll(config));
}
static void vx855_set_primary_pll(struct via_pll_config config)
{
k800_set_primary_pll_encoded(vx855_encode_pll(config));
}
static void cle266_set_secondary_pll(struct via_pll_config config)
{
cle266_set_secondary_pll_encoded(cle266_encode_pll(config));
}
static void k800_set_secondary_pll(struct via_pll_config config)
{
k800_set_secondary_pll_encoded(k800_encode_pll(config));
}
static void vx855_set_secondary_pll(struct via_pll_config config)
{
k800_set_secondary_pll_encoded(vx855_encode_pll(config));
}
static void k800_set_engine_pll(struct via_pll_config config)
{
set_engine_pll_encoded(k800_encode_pll(config));
}
static void vx855_set_engine_pll(struct via_pll_config config)
{
set_engine_pll_encoded(vx855_encode_pll(config));
}
static void set_primary_pll_state(u8 state)
{
u8 value;
switch (state) {
case VIA_STATE_ON:
value = 0x20;
break;
case VIA_STATE_OFF:
value = 0x00;
break;
default:
return;
}
via_write_reg_mask(VIASR, 0x2D, value, 0x30);
}
static void set_secondary_pll_state(u8 state)
{
u8 value;
switch (state) {
case VIA_STATE_ON:
value = 0x08;
break;
case VIA_STATE_OFF:
value = 0x00;
break;
default:
return;
}
via_write_reg_mask(VIASR, 0x2D, value, 0x0C);
}
static void set_engine_pll_state(u8 state)
{
u8 value;
switch (state) {
case VIA_STATE_ON:
value = 0x02;
break;
case VIA_STATE_OFF:
value = 0x00;
break;
default:
return;
}
via_write_reg_mask(VIASR, 0x2D, value, 0x03);
}
static void set_primary_clock_state(u8 state)
{
u8 value;
switch (state) {
case VIA_STATE_ON:
value = 0x20;
break;
case VIA_STATE_OFF:
value = 0x00;
break;
default:
return;
}
via_write_reg_mask(VIASR, 0x1B, value, 0x30);
}
static void set_secondary_clock_state(u8 state)
{
u8 value;
switch (state) {
case VIA_STATE_ON:
value = 0x80;
break;
case VIA_STATE_OFF:
value = 0x00;
break;
default:
return;
}
via_write_reg_mask(VIASR, 0x1B, value, 0xC0);
}
static inline u8 set_clock_source_common(enum via_clksrc source, bool use_pll)
{
u8 data = 0;
switch (source) {
case VIA_CLKSRC_X1:
data = 0x00;
break;
case VIA_CLKSRC_TVX1:
data = 0x02;
break;
case VIA_CLKSRC_TVPLL:
data = 0x04; /* 0x06 should be the same */
break;
case VIA_CLKSRC_DVP1TVCLKR:
data = 0x0A;
break;
case VIA_CLKSRC_CAP0:
data = 0xC;
break;
case VIA_CLKSRC_CAP1:
data = 0x0E;
break;
}
if (!use_pll)
data |= 1;
return data;
}
static void set_primary_clock_source(enum via_clksrc source, bool use_pll)
{
u8 data = set_clock_source_common(source, use_pll) << 4;
via_write_reg_mask(VIACR, 0x6C, data, 0xF0);
}
static void set_secondary_clock_source(enum via_clksrc source, bool use_pll)
{
u8 data = set_clock_source_common(source, use_pll);
via_write_reg_mask(VIACR, 0x6C, data, 0x0F);
}
static void dummy_set_clock_state(u8 state)
{
printk(KERN_INFO "Using undocumented set clock state.\n%s", via_slap);
}
static void dummy_set_clock_source(enum via_clksrc source, bool use_pll)
{
printk(KERN_INFO "Using undocumented set clock source.\n%s", via_slap);
}
static void dummy_set_pll_state(u8 state)
{
printk(KERN_INFO "Using undocumented set PLL state.\n%s", via_slap);
}
static void dummy_set_pll(struct via_pll_config config)
{
printk(KERN_INFO "Using undocumented set PLL.\n%s", via_slap);
}
void via_clock_init(struct via_clock *clock, int gfx_chip)
{
switch (gfx_chip) {
case UNICHROME_CLE266:
case UNICHROME_K400:
clock->set_primary_clock_state = dummy_set_clock_state;
clock->set_primary_clock_source = dummy_set_clock_source;
clock->set_primary_pll_state = dummy_set_pll_state;
clock->set_primary_pll = cle266_set_primary_pll;
clock->set_secondary_clock_state = dummy_set_clock_state;
clock->set_secondary_clock_source = dummy_set_clock_source;
clock->set_secondary_pll_state = dummy_set_pll_state;
clock->set_secondary_pll = cle266_set_secondary_pll;
clock->set_engine_pll_state = dummy_set_pll_state;
clock->set_engine_pll = dummy_set_pll;
break;
case UNICHROME_K800:
case UNICHROME_PM800:
case UNICHROME_CN700:
case UNICHROME_CX700:
case UNICHROME_CN750:
case UNICHROME_K8M890:
case UNICHROME_P4M890:
case UNICHROME_P4M900:
case UNICHROME_VX800:
clock->set_primary_clock_state = set_primary_clock_state;
clock->set_primary_clock_source = set_primary_clock_source;
clock->set_primary_pll_state = set_primary_pll_state;
clock->set_primary_pll = k800_set_primary_pll;
clock->set_secondary_clock_state = set_secondary_clock_state;
clock->set_secondary_clock_source = set_secondary_clock_source;
clock->set_secondary_pll_state = set_secondary_pll_state;
clock->set_secondary_pll = k800_set_secondary_pll;
clock->set_engine_pll_state = set_engine_pll_state;
clock->set_engine_pll = k800_set_engine_pll;
break;
case UNICHROME_VX855:
case UNICHROME_VX900:
clock->set_primary_clock_state = set_primary_clock_state;
clock->set_primary_clock_source = set_primary_clock_source;
clock->set_primary_pll_state = set_primary_pll_state;
clock->set_primary_pll = vx855_set_primary_pll;
clock->set_secondary_clock_state = set_secondary_clock_state;
clock->set_secondary_clock_source = set_secondary_clock_source;
clock->set_secondary_pll_state = set_secondary_pll_state;
clock->set_secondary_pll = vx855_set_secondary_pll;
clock->set_engine_pll_state = set_engine_pll_state;
clock->set_engine_pll = vx855_set_engine_pll;
break;
}
}
![swh spinner](/static/img/swh-spinner.gif)
Computing file changes ...