Revision bfeda41d06d85ad9d52f2413cfc2b77be5022f75 authored by Omar Sandoval on 07 February 2017, 23:33:20 UTC, committed by Ingo Molnar on 08 February 2017, 07:21:31 UTC
Since KERN_CONT became meaningful again, lockdep stack traces have had annoying extra newlines, like this: [ 5.561122] -> #1 (B){+.+...}: [ 5.561528] [ 5.561532] [<ffffffff810d8873>] lock_acquire+0xc3/0x210 [ 5.562178] [ 5.562181] [<ffffffff816f6414>] mutex_lock_nested+0x74/0x6d0 [ 5.562861] [ 5.562880] [<ffffffffa01aa3c3>] init_btrfs_fs+0x21/0x196 [btrfs] [ 5.563717] [ 5.563721] [<ffffffff81000472>] do_one_initcall+0x52/0x1b0 [ 5.564554] [ 5.564559] [<ffffffff811a3af6>] do_init_module+0x5f/0x209 [ 5.565357] [ 5.565361] [<ffffffff81122f4d>] load_module+0x218d/0x2b80 [ 5.566020] [ 5.566021] [<ffffffff81123beb>] SyS_finit_module+0xeb/0x120 [ 5.566694] [ 5.566696] [<ffffffff816fd241>] entry_SYSCALL_64_fastpath+0x1f/0xc2 That's happening because each printk() call now gets printed on its own line, and we do a separate call to print the spaces before the symbol. Fix it by doing the printk() directly instead of using the print_ip_sym() helper. Additionally, the symbol address isn't very helpful, so let's get rid of that, too. The final result looks like this: [ 5.194518] -> #1 (B){+.+...}: [ 5.195002] lock_acquire+0xc3/0x210 [ 5.195439] mutex_lock_nested+0x74/0x6d0 [ 5.196491] do_one_initcall+0x52/0x1b0 [ 5.196939] do_init_module+0x5f/0x209 [ 5.197355] load_module+0x218d/0x2b80 [ 5.197792] SyS_finit_module+0xeb/0x120 [ 5.198251] entry_SYSCALL_64_fastpath+0x1f/0xc2 Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Omar Sandoval <osandov@fb.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: kernel-team@fb.com Fixes: 4bcc595ccd80 ("printk: reinstate KERN_CONT for printing continuation lines") Link: http://lkml.kernel.org/r/43b4e114724b2bdb0308fa86cb33aa07d3d67fad.1486510315.git.osandov@fb.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
1 parent 926af62
Kbuild
#
# Kbuild for top-level directory of the kernel
# This file takes care of the following:
# 1) Generate bounds.h
# 2) Generate timeconst.h
# 3) Generate asm-offsets.h (may need bounds.h and timeconst.h)
# 4) Check for missing system calls
# 5) Generate constants.py (may need bounds.h)
# Default sed regexp - multiline due to syntax constraints
define sed-y
"/^->/{s:->#\(.*\):/* \1 */:; \
s:^->\([^ ]*\) [\$$#]*\([-0-9]*\) \(.*\):#define \1 \2 /* \3 */:; \
s:^->\([^ ]*\) [\$$#]*\([^ ]*\) \(.*\):#define \1 \2 /* \3 */:; \
s:->::; p;}"
endef
# Use filechk to avoid rebuilds when a header changes, but the resulting file
# does not
define filechk_offsets
(set -e; \
echo "#ifndef $2"; \
echo "#define $2"; \
echo "/*"; \
echo " * DO NOT MODIFY."; \
echo " *"; \
echo " * This file was generated by Kbuild"; \
echo " */"; \
echo ""; \
sed -ne $(sed-y); \
echo ""; \
echo "#endif" )
endef
#####
# 1) Generate bounds.h
bounds-file := include/generated/bounds.h
always := $(bounds-file)
targets := kernel/bounds.s
# We use internal kbuild rules to avoid the "is up to date" message from make
kernel/bounds.s: kernel/bounds.c FORCE
$(Q)mkdir -p $(dir $@)
$(call if_changed_dep,cc_s_c)
$(obj)/$(bounds-file): kernel/bounds.s FORCE
$(call filechk,offsets,__LINUX_BOUNDS_H__)
#####
# 2) Generate timeconst.h
timeconst-file := include/generated/timeconst.h
targets += $(timeconst-file)
quiet_cmd_gentimeconst = GEN $@
define cmd_gentimeconst
(echo $(CONFIG_HZ) | bc -q $< ) > $@
endef
define filechk_gentimeconst
(echo $(CONFIG_HZ) | bc -q $< )
endef
$(obj)/$(timeconst-file): kernel/time/timeconst.bc FORCE
$(call filechk,gentimeconst)
#####
# 3) Generate asm-offsets.h
#
offsets-file := include/generated/asm-offsets.h
always += $(offsets-file)
targets += arch/$(SRCARCH)/kernel/asm-offsets.s
# We use internal kbuild rules to avoid the "is up to date" message from make
arch/$(SRCARCH)/kernel/asm-offsets.s: arch/$(SRCARCH)/kernel/asm-offsets.c \
$(obj)/$(timeconst-file) $(obj)/$(bounds-file) FORCE
$(Q)mkdir -p $(dir $@)
$(call if_changed_dep,cc_s_c)
$(obj)/$(offsets-file): arch/$(SRCARCH)/kernel/asm-offsets.s FORCE
$(call filechk,offsets,__ASM_OFFSETS_H__)
#####
# 4) Check for missing system calls
#
always += missing-syscalls
targets += missing-syscalls
quiet_cmd_syscalls = CALL $<
cmd_syscalls = $(CONFIG_SHELL) $< $(CC) $(c_flags) $(missing_syscalls_flags)
missing-syscalls: scripts/checksyscalls.sh $(offsets-file) FORCE
$(call cmd,syscalls)
#####
# 5) Generate constants for Python GDB integration
#
extra-$(CONFIG_GDB_SCRIPTS) += build_constants_py
build_constants_py: $(obj)/$(timeconst-file) $(obj)/$(bounds-file)
@$(MAKE) $(build)=scripts/gdb/linux $@
# Keep these three files during make clean
no-clean-files := $(bounds-file) $(offsets-file) $(timeconst-file)
![swh spinner](/static/img/swh-spinner.gif)
Computing file changes ...