c08ef24 | bear (Mike Taylor) | 08 April 2016, 03:40:01 UTC | add PostMediaMetadata endpoint | 08 April 2016, 03:40:01 UTC |
bd7e6af | Jeremy Low | 28 March 2016, 12:59:17 UTC | Merge pull request #314 from bear/kwargs-consistency Consistency in keyword arguments for "id" parameters | 28 March 2016, 12:59:17 UTC |
7968856 | Jeremy Low | 27 March 2016, 23:25:27 UTC | deletes .spec file - closes issue #310 | 27 March 2016, 23:25:27 UTC |
7dcdf61 | Jeremy Low | 27 March 2016, 23:17:41 UTC | changes postretweet & destroyblock to use status_id and user_id, respectively | 27 March 2016, 23:17:41 UTC |
2870359 | Jeremy Low | 27 March 2016, 22:54:26 UTC | fix up a few more "id" params & add documentation for same. | 27 March 2016, 22:54:34 UTC |
4428fb0 | Jeremy Low | 24 March 2016, 01:06:19 UTC | adds "docs" target to makefile | 24 March 2016, 01:09:04 UTC |
86142a3 | Jeremy Low | 24 March 2016, 01:05:35 UTC | adds documentation re change to "id" kwargs | 24 March 2016, 01:09:04 UTC |
b774d18 | Jeremy Low | 24 March 2016, 00:46:33 UTC | fix up "id" kwargs. "status_id" is more common within the api, but there are a couple methods that use "id" to spec the same thing, which is confusing and inconsistent. "woeid" avoids shadowing a builtin, but is also more expressive. | 24 March 2016, 01:08:57 UTC |
19e59b9 | Mike Taylor | 23 March 2016, 18:14:40 UTC | Merge pull request #313 from meyersj/master Fix documentation for order of bbox coordinates | 23 March 2016, 18:14:40 UTC |
3510472 | Jeffrey Meyers | 23 March 2016, 18:00:41 UTC | Fix documentation for order of bbox coordinates When passing coordinates to `api.GetStreamFilter` the locations parameter should specify coordinates as Longitude,Latitude pairs instead of Latitude,Longitude | 23 March 2016, 18:00:41 UTC |
6dc4555 | Jeremy Low | 22 March 2016, 23:53:10 UTC | Merge pull request #312 from bear/models-pr Combining Models With Inheritence | 22 March 2016, 23:53:10 UTC |
568e6b8 | bear (Mike Taylor) | 22 March 2016, 03:35:21 UTC | update badges | 22 March 2016, 03:35:21 UTC |
c9a365c | bear (Mike Taylor) | 22 March 2016, 03:27:03 UTC | add a requirements file for doc generation | 22 March 2016, 03:27:03 UTC |
b8aee02 | Jeremy Low | 21 March 2016, 02:01:24 UTC | Merge pull request #309 from bear/docs-config-two Documentation update | 21 March 2016, 02:01:24 UTC |
2e692ec | Jeremy Low | 20 March 2016, 18:01:57 UTC | revise docs per PR #308 | 20 March 2016, 18:01:57 UTC |
4302c59 | Jeremy Low | 11 March 2016, 23:44:42 UTC | merge cherry pick | 20 March 2016, 17:32:15 UTC |
104749a | Jeremy Low | 11 March 2016, 23:06:46 UTC | deletes built documentation | 20 March 2016, 17:30:20 UTC |
3ca425b | Jeremy Low | 11 March 2016, 20:55:45 UTC | updates README | 20 March 2016, 17:29:21 UTC |
420d609 | Jeremy Low | 11 March 2016, 20:02:02 UTC | adds documentation for contributing and rate limits | 20 March 2016, 17:28:40 UTC |
3133f1b | Jeremy Low | 20 March 2016, 17:08:17 UTC | flake8 cleanup | 20 March 2016, 17:08:17 UTC |
95dc63d | Jeremy Low | 20 March 2016, 01:56:54 UTC | adds doc strings for base model functions | 20 March 2016, 01:58:51 UTC |
7e7dee8 | Jeremy Low | 20 March 2016, 01:37:11 UTC | adds examples in doc for AsDict method | 20 March 2016, 01:58:51 UTC |
33515d9 | Jeremy Low | 09 March 2016, 11:55:28 UTC | changes Status.NewFromJsonDict to class method to allow for proper subclassing | 20 March 2016, 01:58:42 UTC |
f85e4f2 | Jeremy Low | 07 March 2016, 23:01:56 UTC | simplifies instance checking for iterators, cleans up naming and docs for models. | 20 March 2016, 01:52:54 UTC |
faa3ff6 | Jeremy Low | 06 March 2016, 15:31:11 UTC | test for issue #231 | 20 March 2016, 01:51:45 UTC |
2eb5165 | Jeremy Low | 06 March 2016, 15:19:28 UTC | removes old class files | 20 March 2016, 01:51:40 UTC |
fcecde0 | Jeremy Low | 06 March 2016, 15:19:00 UTC | updates tests for changes to repr functions | 20 March 2016, 01:51:36 UTC |
724fafb | Jeremy Low | 06 March 2016, 15:10:17 UTC | Cleans up AsDict construct to deal with subobjects and Status NewFromJson method | 20 March 2016, 01:51:33 UTC |
6b9220b | Jeremy Low | 16 February 2016, 12:52:29 UTC | adds tests and data for new-style models | 20 March 2016, 01:51:29 UTC |
484695f | Jeremy Low | 16 February 2016, 12:08:22 UTC | partial work on creation of models - isinstance(value) should be getattr() | 20 March 2016, 01:51:25 UTC |
73f07a8 | Jeremy Low | 14 February 2016, 01:54:43 UTC | moves twitter.Status to models, inherits from TwitterModel, reworks tests for properties | 20 March 2016, 01:51:21 UTC |
169218b | Jeremy Low | 13 February 2016, 19:53:51 UTC | update for twitter.UserStatus object to include connections | 20 March 2016, 01:51:14 UTC |
0e44e76 | Jeremy Low | 23 January 2016, 18:50:14 UTC | updates Trend objects to reflect info avail from twitter. | 20 March 2016, 01:51:09 UTC |
9ed8e27 | Jeremy Low | 23 January 2016, 18:46:29 UTC | adds __repr__ method for all models and fixes constructor for List objects | 20 March 2016, 01:51:05 UTC |
22e3ffe | Jeremy Low | 22 January 2016, 02:26:40 UTC | first pass at unified models | 20 March 2016, 01:50:51 UTC |
80b747b | Mike Taylor | 17 March 2016, 22:30:15 UTC | Merge pull request #308 from bear/circleci-and-update-setup-environment setup environment to be more modern; tweak Makefile; convert to CircleCI | 17 March 2016, 22:30:15 UTC |
e09469b | bear (Mike Taylor) | 16 March 2016, 22:36:43 UTC | use the testing requirements file from jeremy's work | 16 March 2016, 22:36:43 UTC |
095eac1 | bear (Mike Taylor) | 16 March 2016, 22:29:37 UTC | lint fixes | 16 March 2016, 22:29:37 UTC |
689cca6 | bear (Mike Taylor) | 16 March 2016, 22:23:48 UTC | build trigger | 16 March 2016, 22:23:48 UTC |
57f1a3c | bear (Mike Taylor) | 16 March 2016, 21:58:52 UTC | merge master | 16 March 2016, 21:58:52 UTC |
91d425d | bear (Mike Taylor) | 16 March 2016, 03:36:23 UTC | make pytest ignore venv directory which is present in circleci by default | 16 March 2016, 03:36:23 UTC |
844bfae | bear (Mike Taylor) | 16 March 2016, 03:35:39 UTC | remove apikey.py and it's import from the api tests - use environment vars instead | 16 March 2016, 03:35:39 UTC |
4881ce0 | bear (Mike Taylor) | 16 March 2016, 03:06:52 UTC | add an info target; adjust circle config to force pip upgrade and to run info target before tests | 16 March 2016, 03:06:52 UTC |
9905273 | bear (Mike Taylor) | 16 March 2016, 03:00:30 UTC | and.... make sure you use the new makefile targets.... | 16 March 2016, 03:00:30 UTC |
9a90658 | bear (Mike Taylor) | 16 March 2016, 02:58:42 UTC | fix cut-n-paste glitch in circle config | 16 March 2016, 02:58:42 UTC |
91e652c | bear (Mike Taylor) | 16 March 2016, 02:56:46 UTC | setup environment to be more modern; tweak Makefile; convert to CircleCI | 16 March 2016, 02:56:46 UTC |
b49b103 | Mike Taylor | 19 February 2016, 19:44:18 UTC | Merge pull request #301 from bear/feature/docs Documentation Updates | 19 February 2016, 19:44:18 UTC |
51afad9 | Jeremy Low | 18 February 2016, 11:58:14 UTC | updates examples/shorten_url.py per issue #298 | 18 February 2016, 11:58:14 UTC |
63a897b | Jeremy Low | 18 February 2016, 11:16:57 UTC | adds streaming example for tracking user mentions | 18 February 2016, 11:17:11 UTC |
181549a | Jeremy Low | 25 January 2016, 23:18:51 UTC | adds getting started guide | 18 February 2016, 11:17:11 UTC |
940502d | Jeremy Low | 24 January 2016, 20:31:53 UTC | adds module documentation to index since there is so much inline doc | 18 February 2016, 11:17:11 UTC |
bcff1c2 | Mike Taylor | 18 February 2016, 06:36:27 UTC | Merge pull request #300 from bear/fixes/streaming_decode_error fixes content.decode errors for streaming endpoints | 18 February 2016, 06:36:27 UTC |
ef777b1 | Jeremy Low | 18 February 2016, 01:38:20 UTC | fixes content.decode errors for streaming endpoints | 18 February 2016, 01:38:20 UTC |
5dc2acd | Jeremy Low | 18 February 2016, 00:48:16 UTC | Merge pull request #299 from bear/feature/ratelimiting Updates to Rate Limi Handling | 18 February 2016, 00:48:16 UTC |
9dc5492 | Jeremy Low | 17 February 2016, 02:53:40 UTC | removes check on reset time. The idea is that if you are making a call to, say, ``/statuses/lookup.json`` and the limit information is stale, i.e., limit.reset is in the past, then you should make another call to ``/application/rate_limit_status.json`` to get your new limits and reset. That said, this could result in a lot of hits to *that* endpoint, thereby rate limiting your application on the ``/application/rate_limit_status.json`` endpoint and causing unnecessary sleeps for the API. Worst case scenario is that your application calls a bunch of different methods hitting a bunch of different endpoints and you end up making a ton of checks on rate_limit_status.json and, since ``Api.InitializeRateLimit()`` does not abide by rate limits, you could get blacklisted. | 17 February 2016, 02:54:43 UTC |
c5d66cf | Jeremy Low | 17 February 2016, 00:22:46 UTC | removes old GetRateLimitStatus method, fixes typos, adds tests for setting rate_limit object | 17 February 2016, 00:22:46 UTC |
c84c3ca | Jeremy Low | 16 February 2016, 12:50:16 UTC | remove old ratelimiting functions | 17 February 2016, 00:00:21 UTC |
00a9d3b | Jeremy Low | 31 January 2016, 19:24:37 UTC | reworks rate limiting, adds tests for same, inline docs | 16 February 2016, 23:59:43 UTC |
139f251 | Jeremy Low | 13 February 2016, 14:59:21 UTC | Merge pull request #297 from bear/feature/friendship_update Update to LookupFriendship | 13 February 2016, 14:59:21 UTC |
d239858 | Jeremy Low | 11 February 2016, 23:07:51 UTC | updates __eq__ check for muting/blocking/following received & requested | 11 February 2016, 23:07:51 UTC |
b96b007 | Jeremy Low | 11 February 2016, 22:37:10 UTC | adds migration docs for changes to LookupFriendship | 11 February 2016, 22:37:10 UTC |
a19786e | Jeremy Low | 11 February 2016, 22:35:18 UTC | reworks LookupFriendship to accept list, int, str for user_id, screen_name params; removes users param; adds tests and data for method | 11 February 2016, 22:35:25 UTC |
89ad4c2 | Jeremy Low | 11 February 2016, 22:30:20 UTC | adds following_received, following_requested, muting, and blocking params for UserStatus | 11 February 2016, 22:30:20 UTC |
349b16b | Jeremy Low | 10 February 2016, 23:07:30 UTC | Merge pull request #296 from bear/fixes/issue232 Fix for issue #232 in GetSearch() geocode | 10 February 2016, 23:07:30 UTC |
a2c9e2e | Mike Taylor | 10 February 2016, 21:51:36 UTC | Merge pull request #290 from andkon/master Made LookupFriendship accept multiple users | 10 February 2016, 21:51:36 UTC |
30b4449 | Jeremy Low | 10 February 2016, 11:30:34 UTC | fixes issue #232 : in GetSearch() geocode can be either a string like "37.781157,-122.398720,1mi" or a list/tuple such as [37.781157,-122.398720,"1mi"]. Inline documentation updated to reflect change. All tests passing & should not break old behavior | 10 February 2016, 11:30:34 UTC |
9206c7d | Jeremy Low | 09 February 2016, 23:21:45 UTC | Merge pull request #295 from bear/fixes/issue294 Updates to PostMedia & Associated Methods - Fixes issue #294. | 09 February 2016, 23:21:45 UTC |
4dcd279 | Jeremy Low | 09 February 2016, 12:22:10 UTC | fixes issue #294. Errors were from the way that http requests were handled with urllib2.urlopen, which returns a not-really-file like object (as opposed to the python3 version, which does). Additionally, there were some issues with how media_ids was joined into a string for posting in PostUpdate; those have been fixed. Tests have been added for most of these features with the exception of PostUpdate with http because of the way responses/mock works with a streaming URL. | 09 February 2016, 12:22:10 UTC |
2e952ff | Jeremy Low | 31 January 2016, 19:26:55 UTC | Merge pull request #291 from bear/tests_lists Adds Tests for Various Lists Functions | 31 January 2016, 19:26:55 UTC |
76f61c2 | Jeremy Low | 30 January 2016, 22:03:36 UTC | adds tests for Create/DestroyListsMember() methods | 30 January 2016, 22:13:07 UTC |
3e1976b | Jeremy Low | 30 January 2016, 17:48:40 UTC | rewrites tests for GetListsMembers/Paged | 30 January 2016, 17:48:40 UTC |
b4c4ef3 | Jeremy Low | 30 January 2016, 15:31:52 UTC | adds tests for GetSubscriptions and GetMemberships | 30 January 2016, 15:31:52 UTC |
1530b9a | Mike Taylor | 30 January 2016, 14:53:01 UTC | Merge pull request #289 from nikolas/patch-1 make print examples in README python3-compatible | 30 January 2016, 14:53:01 UTC |
3515656 | Jeremy Low | 30 January 2016, 12:30:41 UTC | adds tests and data for ShowSubscription | 30 January 2016, 12:30:41 UTC |
afc5490 | Andrew Konoff | 30 January 2016, 09:36:24 UTC | Forgot to check for users parameter | 30 January 2016, 09:36:24 UTC |
745af6d | Andrew Konoff | 30 January 2016, 09:34:03 UTC | Added users parameter to LookupFriendship | 30 January 2016, 09:34:03 UTC |
90eace0 | Andrew Konoff | 30 January 2016, 09:13:04 UTC | Made LookupFriendship closer in style to UsersLookup | 30 January 2016, 09:13:04 UTC |
fa6a14d | Andrew Konoff | 30 January 2016, 08:19:47 UTC | Style changes | 30 January 2016, 08:19:47 UTC |
dca4ac8 | Andrew Konoff | 30 January 2016, 08:09:19 UTC | Added multiple account lookups to LookupFriendship | 30 January 2016, 08:09:19 UTC |
5fe6d21 | Nik Nyby | 30 January 2016, 04:41:17 UTC | make print examples in README python3-compatible | 30 January 2016, 04:41:17 UTC |
b638aa0 | Jeremy Low | 30 January 2016, 01:59:01 UTC | adds test for DestroySubscription | 30 January 2016, 01:59:01 UTC |
7d8c92c | Jeremy Low | 30 January 2016, 01:54:39 UTC | adds tests for CreateSubscription | 30 January 2016, 01:58:41 UTC |
0f81c13 | Jeremy Low | 30 January 2016, 01:50:41 UTC | adds function for IDing a List and updates all List-based functions with same | 30 January 2016, 01:50:41 UTC |
c845c1b | Jeremy Low | 30 January 2016, 01:34:18 UTC | adds tests for and updates DestroyList | 30 January 2016, 01:34:18 UTC |
d3dc36b | Jeremy Low | 30 January 2016, 01:20:08 UTC | adds testdata for CreateList | 30 January 2016, 01:20:08 UTC |
133e31a | Jeremy Low | 30 January 2016, 01:19:44 UTC | adds GetListMembersPaged method | 30 January 2016, 01:19:44 UTC |
244647a | Jeremy Low | 30 January 2016, 01:19:00 UTC | adds tests for CreateList | 30 January 2016, 01:19:00 UTC |
2d51d13 | Jeremy Low | 30 January 2016, 01:18:41 UTC | adds docs for GetListMembersPages & changes re GetListMembers | 30 January 2016, 01:18:41 UTC |
42a7653 | Jeremy Low | 29 January 2016, 23:37:34 UTC | adds tests for GetListTimeline | 29 January 2016, 23:37:34 UTC |
c53fada | Jeremy Low | 29 January 2016, 22:57:37 UTC | alphabetize migration guide | 29 January 2016, 22:57:37 UTC |
c879c8c | Jeremy Low | 29 January 2016, 22:35:00 UTC | updates inline doc strings & fixes list join error in Create/DestroyMembership | 29 January 2016, 22:35:00 UTC |
332baaf | Jeremy Low | 29 January 2016, 02:26:52 UTC | docs now link to source + info re GetListsPaged | 29 January 2016, 12:04:21 UTC |
ea42444 | Jeremy Low | 29 January 2016, 11:56:25 UTC | intermediate work on Api.*Lists*() methods with fixes for decoding/long py3 errors | 29 January 2016, 12:03:06 UTC |
a168585 | Jeremy Low | 29 January 2016, 01:00:39 UTC | adds simple type checking function for values passed to Api methods | 29 January 2016, 12:03:06 UTC |
efbbd92 | Jeremy Low | 29 January 2016, 11:54:54 UTC | adds tests for Lists methods | 29 January 2016, 11:54:54 UTC |
fb34580 | Jeremy Low | 28 January 2016, 23:56:38 UTC | Merge pull request #288 from bear/fixes/blocks Updates to GetBlocks() & Associated Methods | 28 January 2016, 23:56:38 UTC |
0953292 | Jeremy Low | 28 January 2016, 03:13:40 UTC | updates blocks tests for new methods & data | 28 January 2016, 03:13:40 UTC |
bfb4d14 | Jeremy Low | 28 January 2016, 03:13:09 UTC | removes outdated testdata for blocks | 28 January 2016, 03:13:09 UTC |
db8c54f | Jeremy Low | 28 January 2016, 03:12:43 UTC | adds documentation for new blocks methods | 28 January 2016, 03:12:43 UTC |
ddbe346 | Jeremy Low | 28 January 2016, 03:12:16 UTC | adds tests data for blocks methods | 28 January 2016, 03:12:16 UTC |