https://github.com/torvalds/linux
Revision c0a20263dbe1fc5f394913d71063c9cd8282c5db authored by Takashi Iwai on 10 June 2011, 13:28:15 UTC, committed by Takashi Iwai on 10 June 2011, 13:28:15 UTC
Some Reatlek model quirks use master_mute bool switch for controlling
the master-mute of outputs.  For these cases, the initialization of HP
pins/amps were forgotten during the transition to the common automute
helper function in 3.0 development time, and resulted in the muted HP
output as default.

This patch fixes the issue by adjusting the HP output explicitly with
master_mute switch.

Tested-by: Michal Hocko <mhocko@suse.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
1 parent 20f5e0b
Raw File
Tip revision: c0a20263dbe1fc5f394913d71063c9cd8282c5db authored by Takashi Iwai on 10 June 2011, 13:28:15 UTC
ALSA: hda - Fix initialization of hp pins with master_mute in Realtek
Tip revision: c0a2026
sync.c
/*
 * High-level sync()-related operations
 */

#include <linux/kernel.h>
#include <linux/file.h>
#include <linux/fs.h>
#include <linux/slab.h>
#include <linux/module.h>
#include <linux/namei.h>
#include <linux/sched.h>
#include <linux/writeback.h>
#include <linux/syscalls.h>
#include <linux/linkage.h>
#include <linux/pagemap.h>
#include <linux/quotaops.h>
#include <linux/buffer_head.h>
#include <linux/backing-dev.h>
#include "internal.h"

#define VALID_FLAGS (SYNC_FILE_RANGE_WAIT_BEFORE|SYNC_FILE_RANGE_WRITE| \
			SYNC_FILE_RANGE_WAIT_AFTER)

/*
 * Do the filesystem syncing work. For simple filesystems
 * writeback_inodes_sb(sb) just dirties buffers with inodes so we have to
 * submit IO for these buffers via __sync_blockdev(). This also speeds up the
 * wait == 1 case since in that case write_inode() functions do
 * sync_dirty_buffer() and thus effectively write one block at a time.
 */
static int __sync_filesystem(struct super_block *sb, int wait)
{
	/*
	 * This should be safe, as we require bdi backing to actually
	 * write out data in the first place
	 */
	if (sb->s_bdi == &noop_backing_dev_info)
		return 0;

	if (sb->s_qcop && sb->s_qcop->quota_sync)
		sb->s_qcop->quota_sync(sb, -1, wait);

	if (wait)
		sync_inodes_sb(sb);
	else
		writeback_inodes_sb(sb);

	if (sb->s_op->sync_fs)
		sb->s_op->sync_fs(sb, wait);
	return __sync_blockdev(sb->s_bdev, wait);
}

/*
 * Write out and wait upon all dirty data associated with this
 * superblock.  Filesystem data as well as the underlying block
 * device.  Takes the superblock lock.
 */
int sync_filesystem(struct super_block *sb)
{
	int ret;

	/*
	 * We need to be protected against the filesystem going from
	 * r/o to r/w or vice versa.
	 */
	WARN_ON(!rwsem_is_locked(&sb->s_umount));

	/*
	 * No point in syncing out anything if the filesystem is read-only.
	 */
	if (sb->s_flags & MS_RDONLY)
		return 0;

	ret = __sync_filesystem(sb, 0);
	if (ret < 0)
		return ret;
	return __sync_filesystem(sb, 1);
}
EXPORT_SYMBOL_GPL(sync_filesystem);

static void sync_one_sb(struct super_block *sb, void *arg)
{
	if (!(sb->s_flags & MS_RDONLY))
		__sync_filesystem(sb, *(int *)arg);
}
/*
 * Sync all the data for all the filesystems (called by sys_sync() and
 * emergency sync)
 */
static void sync_filesystems(int wait)
{
	iterate_supers(sync_one_sb, &wait);
}

/*
 * sync everything.  Start out by waking pdflush, because that writes back
 * all queues in parallel.
 */
SYSCALL_DEFINE0(sync)
{
	wakeup_flusher_threads(0);
	sync_filesystems(0);
	sync_filesystems(1);
	if (unlikely(laptop_mode))
		laptop_sync_completion();
	return 0;
}

static void do_sync_work(struct work_struct *work)
{
	/*
	 * Sync twice to reduce the possibility we skipped some inodes / pages
	 * because they were temporarily locked
	 */
	sync_filesystems(0);
	sync_filesystems(0);
	printk("Emergency Sync complete\n");
	kfree(work);
}

void emergency_sync(void)
{
	struct work_struct *work;

	work = kmalloc(sizeof(*work), GFP_ATOMIC);
	if (work) {
		INIT_WORK(work, do_sync_work);
		schedule_work(work);
	}
}

/*
 * sync a single super
 */
SYSCALL_DEFINE1(syncfs, int, fd)
{
	struct file *file;
	struct super_block *sb;
	int ret;
	int fput_needed;

	file = fget_light(fd, &fput_needed);
	if (!file)
		return -EBADF;
	sb = file->f_dentry->d_sb;

	down_read(&sb->s_umount);
	ret = sync_filesystem(sb);
	up_read(&sb->s_umount);

	fput_light(file, fput_needed);
	return ret;
}

/**
 * vfs_fsync_range - helper to sync a range of data & metadata to disk
 * @file:		file to sync
 * @start:		offset in bytes of the beginning of data range to sync
 * @end:		offset in bytes of the end of data range (inclusive)
 * @datasync:		perform only datasync
 *
 * Write back data in range @start..@end and metadata for @file to disk.  If
 * @datasync is set only metadata needed to access modified file data is
 * written.
 */
int vfs_fsync_range(struct file *file, loff_t start, loff_t end, int datasync)
{
	struct address_space *mapping = file->f_mapping;
	int err, ret;

	if (!file->f_op || !file->f_op->fsync) {
		ret = -EINVAL;
		goto out;
	}

	ret = filemap_write_and_wait_range(mapping, start, end);

	/*
	 * We need to protect against concurrent writers, which could cause
	 * livelocks in fsync_buffers_list().
	 */
	mutex_lock(&mapping->host->i_mutex);
	err = file->f_op->fsync(file, datasync);
	if (!ret)
		ret = err;
	mutex_unlock(&mapping->host->i_mutex);

out:
	return ret;
}
EXPORT_SYMBOL(vfs_fsync_range);

/**
 * vfs_fsync - perform a fsync or fdatasync on a file
 * @file:		file to sync
 * @datasync:		only perform a fdatasync operation
 *
 * Write back data and metadata for @file to disk.  If @datasync is
 * set only metadata needed to access modified file data is written.
 */
int vfs_fsync(struct file *file, int datasync)
{
	return vfs_fsync_range(file, 0, LLONG_MAX, datasync);
}
EXPORT_SYMBOL(vfs_fsync);

static int do_fsync(unsigned int fd, int datasync)
{
	struct file *file;
	int ret = -EBADF;

	file = fget(fd);
	if (file) {
		ret = vfs_fsync(file, datasync);
		fput(file);
	}
	return ret;
}

SYSCALL_DEFINE1(fsync, unsigned int, fd)
{
	return do_fsync(fd, 0);
}

SYSCALL_DEFINE1(fdatasync, unsigned int, fd)
{
	return do_fsync(fd, 1);
}

/**
 * generic_write_sync - perform syncing after a write if file / inode is sync
 * @file:	file to which the write happened
 * @pos:	offset where the write started
 * @count:	length of the write
 *
 * This is just a simple wrapper about our general syncing function.
 */
int generic_write_sync(struct file *file, loff_t pos, loff_t count)
{
	if (!(file->f_flags & O_DSYNC) && !IS_SYNC(file->f_mapping->host))
		return 0;
	return vfs_fsync_range(file, pos, pos + count - 1,
			       (file->f_flags & __O_SYNC) ? 0 : 1);
}
EXPORT_SYMBOL(generic_write_sync);

/*
 * sys_sync_file_range() permits finely controlled syncing over a segment of
 * a file in the range offset .. (offset+nbytes-1) inclusive.  If nbytes is
 * zero then sys_sync_file_range() will operate from offset out to EOF.
 *
 * The flag bits are:
 *
 * SYNC_FILE_RANGE_WAIT_BEFORE: wait upon writeout of all pages in the range
 * before performing the write.
 *
 * SYNC_FILE_RANGE_WRITE: initiate writeout of all those dirty pages in the
 * range which are not presently under writeback. Note that this may block for
 * significant periods due to exhaustion of disk request structures.
 *
 * SYNC_FILE_RANGE_WAIT_AFTER: wait upon writeout of all pages in the range
 * after performing the write.
 *
 * Useful combinations of the flag bits are:
 *
 * SYNC_FILE_RANGE_WAIT_BEFORE|SYNC_FILE_RANGE_WRITE: ensures that all pages
 * in the range which were dirty on entry to sys_sync_file_range() are placed
 * under writeout.  This is a start-write-for-data-integrity operation.
 *
 * SYNC_FILE_RANGE_WRITE: start writeout of all dirty pages in the range which
 * are not presently under writeout.  This is an asynchronous flush-to-disk
 * operation.  Not suitable for data integrity operations.
 *
 * SYNC_FILE_RANGE_WAIT_BEFORE (or SYNC_FILE_RANGE_WAIT_AFTER): wait for
 * completion of writeout of all pages in the range.  This will be used after an
 * earlier SYNC_FILE_RANGE_WAIT_BEFORE|SYNC_FILE_RANGE_WRITE operation to wait
 * for that operation to complete and to return the result.
 *
 * SYNC_FILE_RANGE_WAIT_BEFORE|SYNC_FILE_RANGE_WRITE|SYNC_FILE_RANGE_WAIT_AFTER:
 * a traditional sync() operation.  This is a write-for-data-integrity operation
 * which will ensure that all pages in the range which were dirty on entry to
 * sys_sync_file_range() are committed to disk.
 *
 *
 * SYNC_FILE_RANGE_WAIT_BEFORE and SYNC_FILE_RANGE_WAIT_AFTER will detect any
 * I/O errors or ENOSPC conditions and will return those to the caller, after
 * clearing the EIO and ENOSPC flags in the address_space.
 *
 * It should be noted that none of these operations write out the file's
 * metadata.  So unless the application is strictly performing overwrites of
 * already-instantiated disk blocks, there are no guarantees here that the data
 * will be available after a crash.
 */
SYSCALL_DEFINE(sync_file_range)(int fd, loff_t offset, loff_t nbytes,
				unsigned int flags)
{
	int ret;
	struct file *file;
	struct address_space *mapping;
	loff_t endbyte;			/* inclusive */
	int fput_needed;
	umode_t i_mode;

	ret = -EINVAL;
	if (flags & ~VALID_FLAGS)
		goto out;

	endbyte = offset + nbytes;

	if ((s64)offset < 0)
		goto out;
	if ((s64)endbyte < 0)
		goto out;
	if (endbyte < offset)
		goto out;

	if (sizeof(pgoff_t) == 4) {
		if (offset >= (0x100000000ULL << PAGE_CACHE_SHIFT)) {
			/*
			 * The range starts outside a 32 bit machine's
			 * pagecache addressing capabilities.  Let it "succeed"
			 */
			ret = 0;
			goto out;
		}
		if (endbyte >= (0x100000000ULL << PAGE_CACHE_SHIFT)) {
			/*
			 * Out to EOF
			 */
			nbytes = 0;
		}
	}

	if (nbytes == 0)
		endbyte = LLONG_MAX;
	else
		endbyte--;		/* inclusive */

	ret = -EBADF;
	file = fget_light(fd, &fput_needed);
	if (!file)
		goto out;

	i_mode = file->f_path.dentry->d_inode->i_mode;
	ret = -ESPIPE;
	if (!S_ISREG(i_mode) && !S_ISBLK(i_mode) && !S_ISDIR(i_mode) &&
			!S_ISLNK(i_mode))
		goto out_put;

	mapping = file->f_mapping;
	if (!mapping) {
		ret = -EINVAL;
		goto out_put;
	}

	ret = 0;
	if (flags & SYNC_FILE_RANGE_WAIT_BEFORE) {
		ret = filemap_fdatawait_range(mapping, offset, endbyte);
		if (ret < 0)
			goto out_put;
	}

	if (flags & SYNC_FILE_RANGE_WRITE) {
		ret = filemap_fdatawrite_range(mapping, offset, endbyte);
		if (ret < 0)
			goto out_put;
	}

	if (flags & SYNC_FILE_RANGE_WAIT_AFTER)
		ret = filemap_fdatawait_range(mapping, offset, endbyte);

out_put:
	fput_light(file, fput_needed);
out:
	return ret;
}
#ifdef CONFIG_HAVE_SYSCALL_WRAPPERS
asmlinkage long SyS_sync_file_range(long fd, loff_t offset, loff_t nbytes,
				    long flags)
{
	return SYSC_sync_file_range((int) fd, offset, nbytes,
				    (unsigned int) flags);
}
SYSCALL_ALIAS(sys_sync_file_range, SyS_sync_file_range);
#endif

/* It would be nice if people remember that not all the world's an i386
   when they introduce new system calls */
SYSCALL_DEFINE(sync_file_range2)(int fd, unsigned int flags,
				 loff_t offset, loff_t nbytes)
{
	return sys_sync_file_range(fd, offset, nbytes, flags);
}
#ifdef CONFIG_HAVE_SYSCALL_WRAPPERS
asmlinkage long SyS_sync_file_range2(long fd, long flags,
				     loff_t offset, loff_t nbytes)
{
	return SYSC_sync_file_range2((int) fd, (unsigned int) flags,
				     offset, nbytes);
}
SYSCALL_ALIAS(sys_sync_file_range2, SyS_sync_file_range2);
#endif
back to top