| c0ec4ff | Linus Torvalds | 29 January 2021, 21:47:47 UTC | Merge tag 'io_uring-5.11-2021-01-29' of git://git.kernel.dk/linux-block Pull io_uring fixes from Jens Axboe: "We got the cancelation story sorted now, so for all intents and purposes, this should be it for 5.11 outside of any potential little fixes that may come in. This contains: - task_work task state fixes (Hao, Pavel) - Cancelation fixes (me, Pavel) - Fix for an inflight req patch in this release (Pavel) - Fix for a lock deadlock issue (Pavel)" * tag 'io_uring-5.11-2021-01-29' of git://git.kernel.dk/linux-block: io_uring: reinforce cancel on flush during exit io_uring: fix sqo ownership false positive warning io_uring: fix list corruption for splice file_get io_uring: fix flush cqring overflow list while TASK_INTERRUPTIBLE io_uring: fix wqe->lock/completion_lock deadlock io_uring: fix cancellation taking mutex while TASK_UNINTERRUPTIBLE io_uring: fix __io_uring_files_cancel() with TASK_UNINTERRUPTIBLE io_uring: only call io_cqring_ev_posted() if events were posted io_uring: if we see flush on exit, cancel related tasks | 29 January 2021, 21:47:47 UTC |
| 8ef24c2 | Linus Torvalds | 29 January 2021, 21:32:05 UTC | Merge tag 'iommu-fixes-v5.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu Pull iommu fixes from Joerg Roedel: - AMD IOMMU fix to make sure features are detected before they are queried. - Intel IOMMU address alignment check fix for an IOLTB flushing command. - Performance fix for Intel IOMMU to make sure the code does not do full IOTLB flushes all the time. Those flushes are very expensive on emulated IOMMUs. * tag 'iommu-fixes-v5.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: iommu/vt-d: Do not use flush-queue when caching-mode is on iommu/vt-d: Correctly check addr alignment in qi_flush_dev_iotlb_pasid() iommu/amd: Use IVHD EFR for early initialization of IOMMU features | 29 January 2021, 21:32:05 UTC |
| 32b0c41 | Linus Torvalds | 29 January 2021, 21:30:09 UTC | Merge tag 'pm-5.11-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management fixes from Rafael Wysocki: "These fix a deadlock in the 'kexec jump' code and address a possible hibernation image creation issue. Specifics: - Fix a deadlock caused by attempting to acquire the same mutex twice in a row in the "kexec jump" code (Baoquan He) - Modify the hibernation image saving code to flush the unwritten data to the swap storage later so as to avoid failing to write the image signature which is possible in some cases (Laurent Badel)" * tag 'pm-5.11-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: PM: hibernate: flush swap writer after marking kernel: kexec: remove the lock operation of system_transition_mutex | 29 January 2021, 21:30:09 UTC |
| 016decc | Linus Torvalds | 29 January 2021, 21:23:21 UTC | Merge tag 'acpi-5.11-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI fixes from Rafael Wysocki: "These fix the handling of notifications in the ACPI thermal driver and address a device enumeration issue leading to the presence of multiple 'MODALIAS=' entries in one uevent file in sysfs in some cases. Specifics: - Modify the ACPI thermal driver to avoid evaluating _TMP directly in its Notify () handler callback and running too many thermal checks for one thermal zone at the same time so as to address a work item accumulation issue observed on some systems that fail to shut down as a result of it (Rafael Wysocki) - Modify the ACPI uevent file creation code to avoid putting multiple 'MODALIAS=' entries in one uevent file in sysfs which breaks systemd-udevd (Kai-Heng Feng)" * tag 'acpi-5.11-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI: thermal: Do not call acpi_thermal_check() directly ACPI: sysfs: Prefer "compatible" modalias | 29 January 2021, 21:23:21 UTC |
| 6305d15 | Linus Torvalds | 29 January 2021, 21:18:23 UTC | Merge tag 'drm-fixes-2021-01-29' of git://anongit.freedesktop.org/drm/drm Pull drm fixes from Dave Airlie: "Weekly fixes for graphics, nothing too major, nouveau has a few regression fixes for various fallout from header changes previously, vc4 has two fixes, two amdgpu, and a smattering of i915 fixes. All seems on course for a quieter rc7, fingers crossed. nouveau: - fix svm init conditions - fix nv50 modesetting regression - fix cursor plane modifiers - fix > 64x64 cursor regression vc4: - Fix LBM size calculation - Fix high resolutions for hvs5 i915: - Fix ICL MG PHY vswing - Fix subplatform handling - Fix selftest memleak - Clear CACHE_MODE prior to clearing residuals - Always flush the active worker before returning from the wait - Always try to reserve GGTT address 0x0 amdgpu: - Fix a fan control regression on some boards - Fix clang warning" * tag 'drm-fixes-2021-01-29' of git://anongit.freedesktop.org/drm/drm: drm/nouveau/kms/gk104-gp1xx: Fix > 64x64 cursors drm/nouveau/kms/nv50-: Report max cursor size to userspace drivers/nouveau/kms/nv50-: Reject format modifiers for cursor planes drm/nouveau/svm: fail NOUVEAU_SVM_INIT ioctl on unsupported devices drm/nouveau/dispnv50: Restore pushing of all data. amdgpu: fix clang build warning Revert "drm/amdgpu/swsmu: drop set_fan_speed_percent (v2)" drm/i915/gt: Always try to reserve GGTT address 0x0 drm/i915: Always flush the active worker before returning from the wait drm/i915/selftest: Fix potential memory leak drm/i915: Check for all subplatform bits drm/i915: Fix ICL MG PHY vswing handling drm/i915/gt: Clear CACHE_MODE prior to clearing residuals drm/vc4: Correct POS1_SCL for hvs5 drm/vc4: Correct lbm size and calculation drm/nouveau/nvif: fix method count when pushing an array | 29 January 2021, 21:18:23 UTC |
| a9cbbb8 | Linus Torvalds | 29 January 2021, 20:28:20 UTC | tty: avoid using vfs_iocb_iter_write() for redirected console writes It turns out that the vfs_iocb_iter_{read,write}() functions are entirely broken, and don't actually use the passed-in file pointer for IO - only for the preparatory work (permission checking and for the write_iter function lookup). That worked fine for overlayfs, which always builds the new iocb with the same file pointer that it passes in, but in the general case it ends up doing nonsensical things (and could cause an iterator call that doesn't even match the passed-in file pointer). This subtly broke the tty conversion to write_iter in commit 9bb48c82aced ("tty: implement write_iter"), because the console redirection didn't actually end up redirecting anything, since the passed-in file pointer was basically ignored, and the actual write was done with the original non-redirected console tty after all. The main visible effect of this is that the console messages were no longer logged to /var/log/boot.log during graphical boot. Fix the issue by simply not using the vfs write "helper" function at all, and just redirecting the write entirely internally to the tty layer. Do the target writability permission checks when actually registering the target tty with TIOCCONS instead of at write time. Fixes: 9bb48c82aced ("tty: implement write_iter") Reported-and-tested-by: Hans de Goede <hdegoede@redhat.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: stable@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 29 January 2021, 21:12:17 UTC |
| b584b7e | Rafael J. Wysocki | 29 January 2021, 15:28:48 UTC | Merge branch 'acpi-sysfs' * acpi-sysfs: ACPI: sysfs: Prefer "compatible" modalias | 29 January 2021, 15:28:48 UTC |
| bec4c29 | Linus Torvalds | 29 January 2021, 03:40:26 UTC | Merge tag 'ecryptfs-5.11-rc6-setxattr-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/tyhicks/ecryptfs Pull ecryptfs fix from Tyler Hicks: "Fix a regression that resulted in two rounds of UID translations when setting v3 namespaced file capabilities in some configurations" * tag 'ecryptfs-5.11-rc6-setxattr-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/tyhicks/ecryptfs: ecryptfs: fix uid translation for setxattr on security.capability | 29 January 2021, 03:40:26 UTC |
| e0ecafe | Dave Airlie | 29 January 2021, 01:36:38 UTC | Merge tag 'amd-drm-fixes-5.11-2021-01-28' of https://gitlab.freedesktop.org/agd5f/linux into drm-fixes amd-drm-fixes-5.11-2021-01-28: amdgpu: - Fix a fan control regression on some boards - Fix clang warning Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexdeucher@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210128191558.3821-1-alexander.deucher@amd.com | 29 January 2021, 01:36:38 UTC |
| 9a1054c | Dave Airlie | 29 January 2021, 01:33:37 UTC | Merge tag 'drm-intel-fixes-2021-01-28' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes drm/i915 fixes for v5.11-rc6: - Fix ICL MG PHY vswing - Fix subplatform handling - Fix selftest memleak - Clear CACHE_MODE prior to clearing residuals - Always flush the active worker before returning from the wait - Always try to reserve GGTT address 0x0 Signed-off-by: Dave Airlie <airlied@redhat.com> From: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/87y2gdi3mp.fsf@intel.com | 29 January 2021, 01:33:37 UTC |
| fb62b7b | Dave Airlie | 29 January 2021, 01:32:30 UTC | Merge tag 'drm-misc-fixes-2021-01-27' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixes Short summary of fixes pull (less than what git shortlog provides): * drm/vc4: Fix LBM size calculation; Fix high resolutions for hvs5 Signed-off-by: Dave Airlie <airlied@redhat.com> From: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/YBEco1Vxeny8U/ca@linux-uq9g | 29 January 2021, 01:32:49 UTC |
| 87bff75 | Dave Airlie | 29 January 2021, 01:05:41 UTC | Merge branch '04.01-ampere-lite' of git://github.com/skeggsb/linux into drm-fixes Mostly a regression fixes here, a couple of which could lead to display hanging, and have been affecting a number of users. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Ben Skeggs <skeggsb@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/CACAvsv4Y0ZiAevSvgphLAOaZjFi75ECXqUD9ShBvRxZ6S-pb9Q@mail.gmail.com | 29 January 2021, 01:31:55 UTC |
| ba839b7 | Lyude Paul | 19 January 2021, 01:54:14 UTC | drm/nouveau/kms/gk104-gp1xx: Fix > 64x64 cursors While we do handle the additional cursor sizes introduced in NVE4, it looks like we accidentally broke this when converting over to use Nvidia's display headers. Since we now use NVVAL in dispnv50/head907d.c in order to format the value for the cursor layout and NVD9 only had one byte reserved vs. the 2 bytes reserved in later generations, we end up accidentally stripping the second bit in the cursor layout format parameter - causing us to set the wrong cursor size. This fixes that by adding our own curs_set hook for 917d which uses the NV917D headers. Cc: Martin Peres <martin.peres@free.fr> Cc: Jeremy Cline <jcline@redhat.com> Cc: Simon Ser <contact@emersion.fr> Cc: <stable@vger.kernel.org> # v5.9+ Signed-off-by: Lyude Paul <lyude@redhat.com> Fixes: ed0b86a90bf9 ("drm/nouveau/kms/nv50-: use NVIDIA's headers for core head_curs_set()") Signed-off-by: Ben Skeggs <bskeggs@redhat.com> | 29 January 2021, 01:03:11 UTC |
| d3b2f0f | Lyude Paul | 19 January 2021, 01:54:13 UTC | drm/nouveau/kms/nv50-: Report max cursor size to userspace Cc: Martin Peres <martin.peres@free.fr> Cc: Jeremy Cline <jcline@redhat.com> Cc: Simon Ser <contact@emersion.fr> Signed-off-by: Lyude Paul <lyude@redhat.com> Tested-by: Simon Ser <contact@emersion.fr> Signed-off-by: Ben Skeggs <bskeggs@redhat.com> | 29 January 2021, 01:03:11 UTC |
| 7c6d659 | Lyude Paul | 19 January 2021, 01:54:12 UTC | drivers/nouveau/kms/nv50-: Reject format modifiers for cursor planes Nvidia hardware doesn't actually support using tiling formats with the cursor plane, only linear is allowed. In the future, we should write a testcase for this. Fixes: c586f30bf74c ("drm/nouveau/kms: Add format mod prop to base/ovly/nvdisp") Cc: James Jones <jajones@nvidia.com> Cc: Martin Peres <martin.peres@free.fr> Cc: Jeremy Cline <jcline@redhat.com> Cc: Simon Ser <contact@emersion.fr> Cc: <stable@vger.kernel.org> # v5.8+ Signed-off-by: Lyude Paul <lyude@redhat.com> Reviewed-by: Simon Ser <contact@emersion.fr> Reviewed-by: James Jones <jajones@nvidia.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com> | 29 January 2021, 01:03:11 UTC |
| dcd602c | Karol Herbst | 18 January 2021, 17:16:06 UTC | drm/nouveau/svm: fail NOUVEAU_SVM_INIT ioctl on unsupported devices Fixes a crash when trying to create a channel on e.g. Turing GPUs when NOUVEAU_SVM_INIT was called before. Fixes: eeaf06ac1a558 ("drm/nouveau/svm: initial support for shared virtual memory") Signed-off-by: Karol Herbst <kherbst@redhat.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com> | 29 January 2021, 01:03:11 UTC |
| fd55b61 | Bastian Beranek | 21 January 2021, 14:27:36 UTC | drm/nouveau/dispnv50: Restore pushing of all data. Commit f844eb485eb056ad3b67e49f95cbc6c685a73db4 introduced a regression for NV50, which lead to visual artifacts, tearing and eventual crashes. In the changes of f844eb485eb056ad3b67e49f95cbc6c685a73db4 only the first line was correctly translated to the new NVIDIA header macros: - PUSH_NVSQ(push, NV827C, 0x0110, 0, - 0x0114, 0); + PUSH_MTHD(push, NV827C, SET_PROCESSING, + NVDEF(NV827C, SET_PROCESSING, USE_GAIN_OFS, DISABLE)); The lower part ("0x0114, 0") was probably omitted by accident. This patch restores the push of the missing data and fixes the regression. Signed-off-by: Bastian Beranek <bastian.beischer@rwth-aachen.de> Fixes: f844eb485eb05 ("drm/nouveau/kms/nv50-: use NVIDIA's headers for wndw image_set()") Link: https://gitlab.freedesktop.org/drm/nouveau/-/issues/14 Signed-off-by: Ben Skeggs <bskeggs@redhat.com> | 29 January 2021, 01:02:14 UTC |
| 3a7efd1 | Pavel Begunkov | 28 January 2021, 23:23:42 UTC | io_uring: reinforce cancel on flush during exit What 84965ff8a84f0 ("io_uring: if we see flush on exit, cancel related tasks") really wants is to cancel all relevant REQ_F_INFLIGHT requests reliably. That can be achieved by io_uring_cancel_files(), but we'll miss it calling io_uring_cancel_task_requests(files=NULL) from io_uring_flush(), because it will go through __io_uring_cancel_task_requests(). Just always call io_uring_cancel_files() during cancel, it's good enough for now. Cc: stable@vger.kernel.org # 5.9+ Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> | 29 January 2021, 00:04:24 UTC |
| 909b447 | Linus Torvalds | 28 January 2021, 23:24:43 UTC | Merge tag 'net-5.11-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Networking fixes including fixes from can, xfrm, wireless, wireless-drivers and netfilter trees. Nothing scary, Intel WiFi-related fixes seemed most notable to the users. Current release - regressions: - dsa: microchip: ksz8795: fix KSZ8794 port map again to program the CPU port correctly Current release - new code bugs: - iwlwifi: pcie: reschedule in long-running memory reads Previous releases - regressions: - iwlwifi: dbg: don't try to overwrite read-only FW data - iwlwifi: provide gso_type to GSO packets - octeontx2: make sure the buffer is 128 byte aligned - tcp: make TCP_USER_TIMEOUT accurate for zero window probes - xfrm: fix wraparound in xfrm_policy_addr_delta() - xfrm: fix oops in xfrm_replay_advance_bmp due to a race between CPUs in presence of packet reorder - tcp: fix TLP timer not set when CA_STATE changes from DISORDER to OPEN - wext: fix NULL-ptr-dereference with cfg80211's lack of commit() Previous releases - always broken: - igc: fix link speed advertising - stmmac: configure EHL PSE0 GbE and PSE1 GbE to 32 bits DMA addressing - team: protect features update by RCU to avoid deadlock - xfrm: fix disable_xfrm sysctl when used on xfrm interfaces themselves - fec: fix temporary RMII clock reset on link up - can: dev: prevent potential information leak in can_fill_info() Misc: - mrp: fix bad packing of MRP test packet structures - uapi: fix big endian definition of ipv6_rpl_sr_hdr - add David Ahern to IPv4/IPv6 maintainers" * tag 'net-5.11-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (86 commits) rxrpc: Fix memory leak in rxrpc_lookup_local mlxsw: spectrum_span: Do not overwrite policer configuration selftests: forwarding: Specify interface when invoking mausezahn stmmac: intel: Configure EHL PSE0 GbE and PSE1 GbE to 32 bits DMA addressing net: usb: cdc_ether: added support for Thales Cinterion PLSx3 modem family. ibmvnic: Ensure that CRQ entry read are correctly ordered MAINTAINERS: add missing header for bonding net: decnet: fix netdev refcount leaking on error path net: switchdev: don't set port_obj_info->handled true when -EOPNOTSUPP can: dev: prevent potential information leak in can_fill_info() net: fec: Fix temporary RMII clock reset on link up net: lapb: Add locking to the lapb module team: protect features update by RCU to avoid deadlock MAINTAINERS: add David Ahern to IPv4/IPv6 maintainers net/mlx5: CT: Fix incorrect removal of tuple_nat_node from nat rhashtable net/mlx5e: Revert parameters on errors when changing MTU and LRO state without reset net/mlx5e: Revert parameters on errors when changing trust state without reset net/mlx5e: Correctly handle changing the number of queues when the interface is down net/mlx5e: Fix CT rule + encap slow path offload and deletion net/mlx5e: Disable hw-tc-offload when MLX5_CLS_ACT config is disabled ... | 28 January 2021, 23:24:43 UTC |
| b8323f7 | Takeshi Misawa | 28 January 2021, 10:48:36 UTC | rxrpc: Fix memory leak in rxrpc_lookup_local Commit 9ebeddef58c4 ("rxrpc: rxrpc_peer needs to hold a ref on the rxrpc_local record") Then release ref in __rxrpc_put_peer and rxrpc_put_peer_locked. struct rxrpc_peer *rxrpc_alloc_peer(struct rxrpc_local *local, gfp_t gfp) - peer->local = local; + peer->local = rxrpc_get_local(local); rxrpc_discard_prealloc also need ref release in discarding. syzbot report: BUG: memory leak unreferenced object 0xffff8881080ddc00 (size 256): comm "syz-executor339", pid 8462, jiffies 4294942238 (age 12.350s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 0a 00 00 00 00 c0 00 08 81 88 ff ff ................ backtrace: [<000000002b6e495f>] kmalloc include/linux/slab.h:552 [inline] [<000000002b6e495f>] kzalloc include/linux/slab.h:682 [inline] [<000000002b6e495f>] rxrpc_alloc_local net/rxrpc/local_object.c:79 [inline] [<000000002b6e495f>] rxrpc_lookup_local+0x1c1/0x760 net/rxrpc/local_object.c:244 [<000000006b43a77b>] rxrpc_bind+0x174/0x240 net/rxrpc/af_rxrpc.c:149 [<00000000fd447a55>] afs_open_socket+0xdb/0x200 fs/afs/rxrpc.c:64 [<000000007fd8867c>] afs_net_init+0x2b4/0x340 fs/afs/main.c:126 [<0000000063d80ec1>] ops_init+0x4e/0x190 net/core/net_namespace.c:152 [<00000000073c5efa>] setup_net+0xde/0x2d0 net/core/net_namespace.c:342 [<00000000a6744d5b>] copy_net_ns+0x19f/0x3e0 net/core/net_namespace.c:483 [<0000000017d3aec3>] create_new_namespaces+0x199/0x4f0 kernel/nsproxy.c:110 [<00000000186271ef>] unshare_nsproxy_namespaces+0x9b/0x120 kernel/nsproxy.c:226 [<000000002de7bac4>] ksys_unshare+0x2fe/0x5c0 kernel/fork.c:2957 [<00000000349b12ba>] __do_sys_unshare kernel/fork.c:3025 [inline] [<00000000349b12ba>] __se_sys_unshare kernel/fork.c:3023 [inline] [<00000000349b12ba>] __x64_sys_unshare+0x12/0x20 kernel/fork.c:3023 [<000000006d178ef7>] do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46 [<00000000637076d4>] entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fixes: 9ebeddef58c4 ("rxrpc: rxrpc_peer needs to hold a ref on the rxrpc_local record") Signed-off-by: Takeshi Misawa <jeliantsurux@gmail.com> Reported-and-tested-by: syzbot+305326672fed51b205f7@syzkaller.appspotmail.com Signed-off-by: David Howells <dhowells@redhat.com> Link: https://lore.kernel.org/r/161183091692.3506637.3206605651502458810.stgit@warthog.procyon.org.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org> | 28 January 2021, 21:12:14 UTC |
| 924b171 | Jakub Kicinski | 28 January 2021, 21:09:03 UTC | Merge branch 'mlxsw-various-fixes' Ido Schimmel says: ==================== mlxsw: Various fixes Patch #1 fixes wrong invocation of mausezahn in a couple of selftests. The tests started failing after Fedora updated their libnet package from version 1.1.6 to 1.2.1. With the fix the tests pass regardless of libnet version. Patch #2 fixes an issue in the mirroring to CPU code that results in policer configuration being overwritten. ==================== Link: https://lore.kernel.org/r/20210128144820.3280295-1-idosch@idosch.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> | 28 January 2021, 21:09:03 UTC |
| b6f6881 | Ido Schimmel | 28 January 2021, 14:48:20 UTC | mlxsw: spectrum_span: Do not overwrite policer configuration The purpose of the delayed work in the SPAN module is to potentially update the destination port and various encapsulation parameters of SPAN agents that point to a VLAN device or a GRE tap. The destination port can change following the insertion of a new route, for example. SPAN agents that point to a physical port or the CPU port are static and never change throughout the lifetime of the SPAN agent. Therefore, skip over them in the delayed work. This fixes an issue where the delayed work overwrites the policer that was set on a SPAN agent pointing to the CPU. Modifying the delayed work to inherit the original policer configuration is error-prone, as the same will be needed for any new parameter. Fixes: 4039504e6a0c ("mlxsw: spectrum_span: Allow setting policer on a SPAN agent") Reviewed-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> | 28 January 2021, 21:09:01 UTC |
| 11df27f | Danielle Ratson | 28 January 2021, 14:48:19 UTC | selftests: forwarding: Specify interface when invoking mausezahn Specify the interface through which packets should be transmitted so that the test will pass regardless of the libnet version against which mausezahn is linked. Fixes: cab14d1087d9 ("selftests: Add version of router_multipath.sh using nexthop objects") Fixes: 3d578d879517 ("selftests: forwarding: Test IPv4 weighted nexthops") Signed-off-by: Danielle Ratson <danieller@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> | 28 January 2021, 21:09:01 UTC |
| 7cfc448 | Voon Weifeng | 26 January 2021, 10:08:44 UTC | stmmac: intel: Configure EHL PSE0 GbE and PSE1 GbE to 32 bits DMA addressing Fix an issue where dump stack is printed and Reset Adapter occurs when PSE0 GbE or/and PSE1 GbE is/are enabled. EHL PSE0 GbE and PSE1 GbE use 32 bits DMA addressing whereas EHL PCH GbE uses 64 bits DMA addressing. [ 25.535095] ------------[ cut here ]------------ [ 25.540276] NETDEV WATCHDOG: enp0s29f2 (intel-eth-pci): transmit queue 2 timed out [ 25.548749] WARNING: CPU: 2 PID: 0 at net/sched/sch_generic.c:443 dev_watchdog+0x259/0x260 [ 25.558004] Modules linked in: 8021q bnep bluetooth ecryptfs snd_hda_codec_hdmi intel_gpy marvell intel_ishtp_loader intel_ishtp_hid iTCO_wdt mei_hdcp iTCO_vendor_support x86_pkg_temp_thermal kvm_intel dwmac_intel stmmac kvm igb pcs_xpcs irqbypass phylink snd_hda_intel intel_rapl_msr pcspkr dca snd_hda_codec i915 i2c_i801 i2c_smbus libphy intel_ish_ipc snd_hda_core mei_me intel_ishtp mei spi_dw_pci 8250_lpss spi_dw thermal dw_dmac_core parport_pc tpm_crb tpm_tis parport tpm_tis_core tpm intel_pmc_core sch_fq_codel uhid fuse configfs snd_sof_pci snd_sof_intel_byt snd_sof_intel_ipc snd_sof_intel_hda_common snd_sof_xtensa_dsp snd_sof snd_soc_acpi_intel_match snd_soc_acpi snd_intel_dspcfg ledtrig_audio snd_soc_core snd_compress ac97_bus snd_pcm snd_timer snd soundcore [ 25.633795] CPU: 2 PID: 0 Comm: swapper/2 Tainted: G U 5.11.0-rc4-intel-lts-MISMAIL5+ #5 [ 25.644306] Hardware name: Intel Corporation Elkhart Lake Embedded Platform/ElkhartLake LPDDR4x T4 RVP1, BIOS EHLSFWI1.R00.2434.A00.2010231402 10/23/2020 [ 25.659674] RIP: 0010:dev_watchdog+0x259/0x260 [ 25.664650] Code: e8 3b 6b 60 ff eb 98 4c 89 ef c6 05 ec e7 bf 00 01 e8 fb e5 fa ff 89 d9 4c 89 ee 48 c7 c7 78 31 d2 9e 48 89 c2 e8 79 1b 18 00 <0f> 0b e9 77 ff ff ff 0f 1f 44 00 00 48 c7 47 08 00 00 00 00 48 c7 [ 25.685647] RSP: 0018:ffffb7ca80160eb8 EFLAGS: 00010286 [ 25.691498] RAX: 0000000000000000 RBX: 0000000000000002 RCX: 0000000000000103 [ 25.699483] RDX: 0000000080000103 RSI: 00000000000000f6 RDI: 00000000ffffffff [ 25.707465] RBP: ffff985709ce0440 R08: 0000000000000000 R09: c0000000ffffefff [ 25.715455] R10: ffffb7ca80160cf0 R11: ffffb7ca80160ce8 R12: ffff985709ce039c [ 25.723438] R13: ffff985709ce0000 R14: 0000000000000008 R15: ffff9857068af940 [ 25.731425] FS: 0000000000000000(0000) GS:ffff985864300000(0000) knlGS:0000000000000000 [ 25.740481] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 25.746913] CR2: 00005567f8bb76b8 CR3: 00000001f8e0a000 CR4: 0000000000350ee0 [ 25.754900] Call Trace: [ 25.757631] <IRQ> [ 25.759891] ? qdisc_put_unlocked+0x30/0x30 [ 25.764565] ? qdisc_put_unlocked+0x30/0x30 [ 25.769245] call_timer_fn+0x2e/0x140 [ 25.773346] run_timer_softirq+0x1f3/0x430 [ 25.777932] ? __hrtimer_run_queues+0x12c/0x2c0 [ 25.783005] ? ktime_get+0x3e/0xa0 [ 25.786812] __do_softirq+0xa6/0x2ef [ 25.790816] asm_call_irq_on_stack+0xf/0x20 [ 25.795501] </IRQ> [ 25.797852] do_softirq_own_stack+0x5d/0x80 [ 25.802538] irq_exit_rcu+0x94/0xb0 [ 25.806475] sysvec_apic_timer_interrupt+0x42/0xc0 [ 25.811836] asm_sysvec_apic_timer_interrupt+0x12/0x20 [ 25.817586] RIP: 0010:cpuidle_enter_state+0xd9/0x370 [ 25.823142] Code: 85 c0 0f 8f 0a 02 00 00 31 ff e8 22 d5 7e ff 45 84 ff 74 12 9c 58 f6 c4 02 0f 85 47 02 00 00 31 ff e8 7b a0 84 ff fb 45 85 f6 <0f> 88 ab 00 00 00 49 63 ce 48 2b 2c 24 48 89 c8 48 6b d1 68 48 c1 [ 25.844140] RSP: 0018:ffffb7ca800f7e80 EFLAGS: 00000206 [ 25.849996] RAX: ffff985864300000 RBX: 0000000000000003 RCX: 000000000000001f [ 25.857975] RDX: 00000005f2028ea8 RSI: ffffffff9ec5907f RDI: ffffffff9ec62a5d [ 25.865961] RBP: 00000005f2028ea8 R08: 0000000000000000 R09: 0000000000029d00 [ 25.873947] R10: 000000137b0e0508 R11: ffff9858643294e4 R12: ffff9858643336d0 [ 25.881935] R13: ffffffff9ef74b00 R14: 0000000000000003 R15: 0000000000000000 [ 25.889918] cpuidle_enter+0x29/0x40 [ 25.893922] do_idle+0x24a/0x290 [ 25.897536] cpu_startup_entry+0x19/0x20 [ 25.901930] start_secondary+0x128/0x160 [ 25.906326] secondary_startup_64_no_verify+0xb0/0xbb [ 25.911983] ---[ end trace b4c0c8195d0ba61f ]--- [ 25.917193] intel-eth-pci 0000:00:1d.2 enp0s29f2: Reset adapter. Fixes: 67c08ac4140a ("net: stmmac: add EHL PSE0 & PSE1 1Gbps PCI info and PCI ID") Signed-off-by: Voon Weifeng <weifeng.voon@intel.com> Co-developed-by: Mohammad Athari Bin Ismail <mohammad.athari.ismail@intel.com> Signed-off-by: Mohammad Athari Bin Ismail <mohammad.athari.ismail@intel.com> Link: https://lore.kernel.org/r/20210126100844.30326-1-mohammad.athari.ismail@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> | 28 January 2021, 21:07:28 UTC |
| dad3a72 | Giacinto Cifelli | 26 January 2021, 04:42:45 UTC | net: usb: cdc_ether: added support for Thales Cinterion PLSx3 modem family. lsusb -v for this device: Bus 003 Device 007: ID 1e2d:0069 Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 239 Miscellaneous Device bDeviceSubClass 2 ? bDeviceProtocol 1 Interface Association bMaxPacketSize0 64 idVendor 0x1e2d idProduct 0x0069 bcdDevice 0.00 iManufacturer 4 Cinterion Wireless Modules iProduct 3 PLSx3 iSerial 5 fa3c1419 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 352 bNumInterfaces 10 bConfigurationValue 1 iConfiguration 2 Cinterion Configuration bmAttributes 0xe0 Self Powered Remote Wakeup MaxPower 500mA Interface Association: bLength 8 bDescriptorType 11 bFirstInterface 0 bInterfaceCount 2 bFunctionClass 2 Communications bFunctionSubClass 2 Abstract (modem) bFunctionProtocol 1 AT-commands (v.25ter) iFunction 0 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 2 Communications bInterfaceSubClass 2 Abstract (modem) bInterfaceProtocol 1 AT-commands (v.25ter) iInterface 0 CDC Header: bcdCDC 1.10 CDC ACM: bmCapabilities 0x02 line coding and serial state CDC Call Management: bmCapabilities 0x03 call management use DataInterface bDataInterface 1 CDC Union: bMasterInterface 0 bSlaveInterface 1 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 5 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 1 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 10 CDC Data bInterfaceSubClass 0 Unused bInterfaceProtocol 0 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x82 EP 2 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x01 EP 1 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Interface Association: bLength 8 bDescriptorType 11 bFirstInterface 2 bInterfaceCount 2 bFunctionClass 2 Communications bFunctionSubClass 2 Abstract (modem) bFunctionProtocol 1 AT-commands (v.25ter) iFunction 0 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 2 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 2 Communications bInterfaceSubClass 2 Abstract (modem) bInterfaceProtocol 1 AT-commands (v.25ter) iInterface 0 CDC Header: bcdCDC 1.10 CDC ACM: bmCapabilities 0x02 line coding and serial state CDC Call Management: bmCapabilities 0x03 call management use DataInterface bDataInterface 3 CDC Union: bMasterInterface 2 bSlaveInterface 3 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x83 EP 3 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 5 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 3 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 10 CDC Data bInterfaceSubClass 0 Unused bInterfaceProtocol 0 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x84 EP 4 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x02 EP 2 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Interface Association: bLength 8 bDescriptorType 11 bFirstInterface 4 bInterfaceCount 2 bFunctionClass 2 Communications bFunctionSubClass 2 Abstract (modem) bFunctionProtocol 1 AT-commands (v.25ter) iFunction 0 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 4 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 2 Communications bInterfaceSubClass 2 Abstract (modem) bInterfaceProtocol 1 AT-commands (v.25ter) iInterface 0 CDC Header: bcdCDC 1.10 CDC ACM: bmCapabilities 0x02 line coding and serial state CDC Call Management: bmCapabilities 0x03 call management use DataInterface bDataInterface 5 CDC Union: bMasterInterface 4 bSlaveInterface 5 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x85 EP 5 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 5 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 5 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 10 CDC Data bInterfaceSubClass 0 Unused bInterfaceProtocol 0 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x86 EP 6 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x03 EP 3 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Interface Association: bLength 8 bDescriptorType 11 bFirstInterface 6 bInterfaceCount 2 bFunctionClass 2 Communications bFunctionSubClass 2 Abstract (modem) bFunctionProtocol 1 AT-commands (v.25ter) iFunction 0 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 6 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 2 Communications bInterfaceSubClass 2 Abstract (modem) bInterfaceProtocol 1 AT-commands (v.25ter) iInterface 0 CDC Header: bcdCDC 1.10 CDC ACM: bmCapabilities 0x02 line coding and serial state CDC Call Management: bmCapabilities 0x03 call management use DataInterface bDataInterface 7 CDC Union: bMasterInterface 6 bSlaveInterface 7 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x87 EP 7 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 5 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 7 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 10 CDC Data bInterfaceSubClass 0 Unused bInterfaceProtocol 0 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x88 EP 8 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x04 EP 4 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Interface Association: bLength 8 bDescriptorType 11 bFirstInterface 8 bInterfaceCount 2 bFunctionClass 2 Communications bFunctionSubClass 0 bFunctionProtocol 0 iFunction 0 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 8 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 2 Communications bInterfaceSubClass 6 Ethernet Networking bInterfaceProtocol 0 iInterface 0 CDC Header: bcdCDC 1.10 CDC Ethernet: iMacAddress 1 00A0C6C14190 bmEthernetStatistics 0x00000000 wMaxSegmentSize 16384 wNumberMCFilters 0x0001 bNumberPowerFilters 0 CDC Union: bMasterInterface 8 bSlaveInterface 9 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x89 EP 9 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 5 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 9 bAlternateSetting 0 bNumEndpoints 0 bInterfaceClass 10 CDC Data bInterfaceSubClass 0 Unused bInterfaceProtocol 0 iInterface 0 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 9 bAlternateSetting 1 bNumEndpoints 2 bInterfaceClass 10 CDC Data bInterfaceSubClass 0 Unused bInterfaceProtocol 0 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x8a EP 10 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x05 EP 5 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Device Qualifier (for other device speed): bLength 10 bDescriptorType 6 bcdUSB 2.00 bDeviceClass 239 Miscellaneous Device bDeviceSubClass 2 ? bDeviceProtocol 1 Interface Association bMaxPacketSize0 64 bNumConfigurations 1 Device Status: 0x0000 (Bus Powered) Signed-off-by: Giacinto Cifelli <gciofono@gmail.com> Link: https://lore.kernel.org/r/20210126044245.8455-1-gciofono@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> | 28 January 2021, 21:01:27 UTC |
| c64396c | Linus Torvalds | 28 January 2021, 19:18:43 UTC | Merge tag 'locking-urgent-2021-01-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull locking fixes from Thomas Gleixner: "A set of PI futex fixes: - Address a longstanding issue where the user space part of the PI futex is not writeable. The kernel returns with inconsistent state which can in the worst case result in a UAF of a tasks kernel stack. The solution is to establish consistent kernel state which makes future operations on the futex fail because user space and kernel space state are inconsistent. Not a problem as PI futexes fundamentaly require a functional RW mapping and if user space pulls the rug under it, then it can keep the pieces it asked for. - Address an issue where the return value is incorrect in case that the futex was acquired after a timeout/signal made the waiter drop out of the rtmutex wait. In one of the corner cases the kernel returned an error code despite having successfully acquired the futex" * tag 'locking-urgent-2021-01-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: futex: Handle faults correctly for PI futexes futex: Simplify fixup_pi_state_owner() futex: Use pi_state_update_owner() in put_pi_state() rtmutex: Remove unused argument from rt_mutex_proxy_unlock() futex: Provide and use pi_state_update_owner() futex: Replace pointless printk in fixup_owner() futex: Ensure the correct return value from futex_lock_pi() | 28 January 2021, 19:18:43 UTC |
| 70b2c60 | Pavel Begunkov | 28 January 2021, 18:39:25 UTC | io_uring: fix sqo ownership false positive warning WARNING: CPU: 0 PID: 21359 at fs/io_uring.c:9042 io_uring_cancel_task_requests+0xe55/0x10c0 fs/io_uring.c:9042 Call Trace: io_uring_flush+0x47b/0x6e0 fs/io_uring.c:9227 filp_close+0xb4/0x170 fs/open.c:1295 close_files fs/file.c:403 [inline] put_files_struct fs/file.c:418 [inline] put_files_struct+0x1cc/0x350 fs/file.c:415 exit_files+0x7e/0xa0 fs/file.c:435 do_exit+0xc22/0x2ae0 kernel/exit.c:820 do_group_exit+0x125/0x310 kernel/exit.c:922 get_signal+0x427/0x20f0 kernel/signal.c:2773 arch_do_signal_or_restart+0x2a8/0x1eb0 arch/x86/kernel/signal.c:811 handle_signal_work kernel/entry/common.c:147 [inline] exit_to_user_mode_loop kernel/entry/common.c:171 [inline] exit_to_user_mode_prepare+0x148/0x250 kernel/entry/common.c:201 __syscall_exit_to_user_mode_work kernel/entry/common.c:291 [inline] syscall_exit_to_user_mode+0x19/0x50 kernel/entry/common.c:302 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Now io_uring_cancel_task_requests() can be called not through file notes but directly, remove a WARN_ONCE() there that give us false positives. That check is not very important and we catch it in other places. Fixes: 84965ff8a84f0 ("io_uring: if we see flush on exit, cancel related tasks") Cc: stable@vger.kernel.org # 5.9+ Reported-by: syzbot+3e3d9bd0c6ce9efbc3ef@syzkaller.appspotmail.com Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> | 28 January 2021, 18:44:13 UTC |
| f609cbb | Pavel Begunkov | 28 January 2021, 18:39:24 UTC | io_uring: fix list corruption for splice file_get kernel BUG at lib/list_debug.c:29! Call Trace: __list_add include/linux/list.h:67 [inline] list_add include/linux/list.h:86 [inline] io_file_get+0x8cc/0xdb0 fs/io_uring.c:6466 __io_splice_prep+0x1bc/0x530 fs/io_uring.c:3866 io_splice_prep fs/io_uring.c:3920 [inline] io_req_prep+0x3546/0x4e80 fs/io_uring.c:6081 io_queue_sqe+0x609/0x10d0 fs/io_uring.c:6628 io_submit_sqe fs/io_uring.c:6705 [inline] io_submit_sqes+0x1495/0x2720 fs/io_uring.c:6953 __do_sys_io_uring_enter+0x107d/0x1f30 fs/io_uring.c:9353 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x44/0xa9 io_file_get() may be called from splice, and so REQ_F_INFLIGHT may already be set. Fixes: 02a13674fa0e8 ("io_uring: account io_uring internal files as REQ_F_INFLIGHT") Cc: stable@vger.kernel.org # 5.9+ Reported-by: syzbot+6879187cf57845801267@syzkaller.appspotmail.com Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> | 28 January 2021, 18:44:12 UTC |
| 00190bc | Arnd Bergmann | 25 January 2021, 12:23:20 UTC | amdgpu: fix clang build warning clang warns about the -mhard-float command line arguments on architectures that do not support this: clang: error: argument unused during compilation: '-mhard-float' [-Werror,-Wunused-command-line-argument] Move this into the gcc-specific arguments. Fixes: e77165bf7b02 ("drm/amd/display: Add DCN3 blocks to Makefile") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> | 28 January 2021, 18:40:48 UTC |
| a119f87 | Alex Deucher | 28 January 2021, 18:28:59 UTC | Revert "drm/amdgpu/swsmu: drop set_fan_speed_percent (v2)" On some boards the rpm interface apparently does not work at all leading to the fan not spinning or spinning at strange speeds. Revert this for now to fix 5.10, 5.11. The follow on patch fixes this properly for 5.12. This reverts commit 8d6e65adc25e23fabbc5293b6cd320195c708dca. Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1408 Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org | 28 January 2021, 18:40:24 UTC |
| e5ff2cb | Linus Torvalds | 28 January 2021, 18:08:08 UTC | Merge tag 'for-linus-5.11-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen fixes from Juergen Gross: - A fix for a regression introduced in 5.11 resulting in Xen dom0 having problems to correctly initialize Xenstore. - A fix for avoiding WARN splats when booting as Xen dom0 with CONFIG_AMD_MEM_ENCRYPT enabled due to a missing trap handler for the #VC exception (even if the handler should never be called). - A fix for the Xen bklfront driver adapting to the correct but unexpected behavior of new qemu. * tag 'for-linus-5.11-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: x86/xen: avoid warning in Xen pv guest with CONFIG_AMD_MEM_ENCRYPT enabled xen: Fix XenStore initialisation for XS_LOCAL xen-blkfront: allow discard-* nodes to be optional | 28 January 2021, 18:08:08 UTC |
| 228345b | Linus Torvalds | 28 January 2021, 18:00:26 UTC | Merge tag 'asm-generic-fixes-v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic Pull ia64 fixes from Arnd Bergmann: "asm-generic/ia64 fixes, and mark as orphaned Commit 2b49ddcef297 ("ia64: convert to legacy_timer_tick") from my timer series I merged through the asm-generic tree caused a regression on all ia64 machines, as bisected by Adrian Glaubitz. Tony Luck is no longer really working on ia64, so instead of merging the fix through his tree, we ended up deciding that I'd merge the fix myself along a patch to mark the architecture as Orphaned and a compile time warning fix I made while working on the regression" [ HPE no longer accepts orders for new Itanium hardware, and Intel stopped accepting orders a year ago. While intel is still officially shipping chips until July 29, 2021, it's unlikely that any such orders actually exist. It's dead, Jim. - Linus ] * tag 'asm-generic-fixes-v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: ia64: Mark architecture as orphaned ia64: fix xchg() warning ia64: fix timer cleanup regression | 28 January 2021, 18:00:26 UTC |
| 7485e08 | Linus Torvalds | 28 January 2021, 17:57:33 UTC | Merge tag 'arm-soc-fixes-v5.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC fixes from Arnd Bergmann: "These are the current arm-soc bug fixes for linux-5.11. I already merged a larger set that just came in during the past three days but has not had much exposure in linux-next, but this is the subset I merged last week. Most of these are for the NXP i.MX platform (descriptions from their pull request): - Fix pcf2127 reset for imx7d-flex-concentrator board. - Fix i.MX6 suspend with Thumb-2 kernel. - Fix ethernet-phy address issue on imx6qdl-sr-som board. - Fix GPIO3 `gpio-ranges` on i.MX8MP. - Select SOC_BUS for IMX_SCU driver to fix build issue. - Fix backlight pwm on imx6qdl-kontron-samx6i which is lost from #pwm-cells conversion. - Fix duplicated bus node name for i.MX8MN SoC. - Fix reset register offset on LS1028A SoC. - Rename MMC node aliases for imx6q-tbs2910 to keep the MMC device index consistent with previous kernel version. - Selecting ARM_GIC_V3 on non-CP15 processors to fix one build failure with i.MX8M SoC driver. - Fix typos with status property on imx6qdl-kontron-samx6i board. - Fix duplicated regulator-name on imx6qdl-gw52xx board. Aside from i.MX, the bugfixes are all over the place: - Coccinelle found a refcount imbalance on integrator - defconfig fix for TI K3 - A boot regression fix for ST ux500 - A code preemption fix for the optee driver - USB DMA regression on Broadcom Stingray - A bogus boot time warning fix for at91 code" * tag 'arm-soc-fixes-v5.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: MAINTAINERS: Include bcm2835 subsequents into search arm64: dts: broadcom: Fix USB DMA address translation for Stingray drivers: soc: atmel: add null entry at the end of at91_soc_allowed_list[] drivers: soc: atmel: Avoid calling at91_soc_init on non AT91 SoCs tee: optee: replace might_sleep with cond_resched firmware: imx: select SOC_BUS to fix firmware build arm64: dts: imx8mp: Correct the gpio ranges of gpio3 ARM: dts: imx6qdl-sr-som: fix some cubox-i platforms ARM: imx: build suspend-imx6.S with arm instruction set ARM: dts: imx7d-flex-concentrator: fix pcf2127 reset ARM: dts: ux500: Reserve memory carveouts arm64: defconfig: Drop unused K3 SoC specific options bus: arm-integrator-lm: Add of_node_put() before return statement ARM: dts: imx6qdl-gw52xx: fix duplicate regulator naming ARM: dts: imx6qdl-kontron-samx6i: fix i2c_lcd/cam default status ARM: imx: fix imx8m dependencies ARM: dts: tbs2910: rename MMC node aliases arm64: dts: ls1028a: fix the offset of the reset register arm64: dts: imx8mn: Fix duplicate node name ARM: dts: imx6qdl-kontron-samx6i: fix pwms for lcd-backlight | 28 January 2021, 17:57:33 UTC |
| b0dfa64 | Linus Torvalds | 28 January 2021, 17:27:26 UTC | Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma Pull rdma fixes from Jason Gunthorpe: "Several recent regressions and some bug fixes: - Typo corrupting the max_recv_sge for cxgb4 - Regression from re-using kernel enums as a HW AbI in vmw_pvrdma - Sleeping inside a spinlock in hns - Revert the attempt to fix devlink deadlocks as the fix is more buggy - Typo in sysfs_emit_at conversions - Revert the removal of VLAN support in rxe" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: Revert "RDMA/rxe: Remove VLAN code leftovers from RXE" RDMA/usnic: Fix misuse of sysfs_emit_at Revert "RDMA/mlx5: Fix devlink deadlock on net namespace deletion" RDMA/hns: Use mutex instead of spinlock for ida allocation RDMA/vmw_pvrdma: Fix network_hdr_type reported in WC RDMA/cxgb4: Fix the reported max_recv_sge value | 28 January 2021, 17:27:26 UTC |
| 25221c9 | Linus Torvalds | 28 January 2021, 17:23:01 UTC | Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid Pull HID fixes from Jiri Kosina: - NULL pointer dereference regression fix for Wacom driver (Jason Gerecke) - functional regression fix for pam handling on some Elan and Synaptics touchpads (Kai-Heng Feng) * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: HID: wacom: Correct NULL dereference on AES pen proximity HID: multitouch: Apply MT_QUIRK_CONFIDENCE quirk for multi-input devices | 28 January 2021, 17:23:01 UTC |
| fc856f1 | Linus Torvalds | 28 January 2021, 17:18:05 UTC | Merge tag 'media/v5.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media fixes from Mauro Carvalho Chehab: - a V4L2 core regression at videobuf2 when checking for single-plane dmabuf - a change at uAPI header v4l2-subdev.h, fixing a breakage as BIT() macro is not available in userspace - fix some regressions at RC core due to the usage of microseconds everywhere on it - a fix for a race condition at RC core - a rename on a newly-introduced kAPI symbol (v4l2_get_link_rate), currently used only by a single driver - Regression fixes for rcar-vin, cedrus, ite-cir, hantro, css, venus, and cec drivers. * tag 'media/v5.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: media: hantro: Fix reset_raw_fmt initialization media: cec: add stm32 driver media: cedrus: Fix H264 decoding media: v4l2-subdev.h: BIT() is not available in userspace media: Revert "media: videobuf2: Fix length check for single plane dmabuf queueing" media: rc: ite-cir: fix min_timeout calculation media: venus: core: Fix platform driver shutdown media: rc: fix timeout handling after switch to microsecond durations media: v4l: common: Fix naming of v4l2_get_link_rate media: rcar-vin: fix return, use ret instead of zero media: ccs: Get static data version minor correctly media: ccs-pll: Fix link frequency for C-PHY media: rc: ensure that uevent can be read directly after rc device register | 28 January 2021, 17:18:05 UTC |
| a467b07 | Linus Torvalds | 28 January 2021, 17:14:58 UTC | Merge tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk fixes from Stephen Boyd: "A handful of clk driver fixes: - Build fix for CONFIG_PM=n in the mmp2 driver - Kconfig warning for unmet dependencies in the i.MX driver - Make the camera AHB clk always be enabled on qcom sc7180 - Use rate round down semantics for qcom sm8250 SD clks" * tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: clk: mmp2: fix build without CONFIG_PM clk: qcom: gcc-sm250: Use floor ops for sdcc clks clk: imx: fix Kconfig warning for i.MX SCU clk clk: qcom: gcc-sc7180: Mark the camera abh clock always ON | 28 January 2021, 17:14:58 UTC |
| be4a338 | Linus Torvalds | 28 January 2021, 17:06:52 UTC | Merge tag 'sound-5.11-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "Although the incoming fixes haven't settled down yet, all changes here are small and mostly device-specific fixes, so nothing look worrisome. - Yet another USB-audio regression fixes - HD-audio ID fix and device-specific quirks - SOF Intel / SoundWire fixes including topology - ASoC Qualcomm and Mediatek fixes" * tag 'sound-5.11-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (24 commits) ALSA: hda/via: Apply the workaround generically for Clevo machines ASoC: Intel: sof_sdw: set proper flags for Dell TGL-H SKU 0A5E ASoC: qcom: lpass: Fix out-of-bounds DAI ID lookup ASoC: mediatek: mt8192-mt6359: add format constraints for RT5682 ASoC: ak4458: correct reset polarity ASoC: SOF: SND_INTEL_DSP_CONFIG dependency ASoC: SOF: Intel: soundwire: fix select/depend unmet dependencies ALSA: hda: intel-dsp-config: add PCI id for TGL-H ALSA: usb-audio: workaround for iface reset issue ALSA: pcm: One more dependency for hw constraints ALSA: hda/realtek: Enable headset of ASUS B1400CEPE with ALC256 ASoC: Intel: Skylake: Zero snd_ctl_elem_value ASoC: Intel: Skylake: skl-topology: Fix OOPs ib skl_tplg_complete ASoC: qcom: Fix number of HDMI RDMA channels on sc7180 ASoC: mediatek: mt8183-da7219: ignore TDM DAI link by default ASoC: mediatek: mt8183-mt6358: ignore TDM DAI link by default ASoC: topology: Properly unregister DAI on removal ASoC: topology: Fix memory corruption in soc_tplg_denum_create_values() ASoC: qcom: lpass-ipq806x: fix bitwidth regmap field ASoC: AMD Renoir - refine DMI entries for some Lenovo products ... | 28 January 2021, 17:06:52 UTC |
| 757fed1 | Wang Hai | 28 January 2021, 11:32:50 UTC | Revert "mm/slub: fix a memory leak in sysfs_slab_add()" This reverts commit dde3c6b72a16c2db826f54b2d49bdea26c3534a2. syzbot report a double-free bug. The following case can cause this bug. - mm/slab_common.c: create_cache(): if the __kmem_cache_create() fails, it does: out_free_cache: kmem_cache_free(kmem_cache, s); - but __kmem_cache_create() - at least for slub() - will have done sysfs_slab_add(s) -> sysfs_create_group() .. fails .. -> kobject_del(&s->kobj); .. which frees s ... We can't remove the kmem_cache_free() in create_cache(), because other error cases of __kmem_cache_create() do not free this. So, revert the commit dde3c6b72a16 ("mm/slub: fix a memory leak in sysfs_slab_add()") to fix this. Reported-by: syzbot+d0bd96b4696c1ef67991@syzkaller.appspotmail.com Fixes: dde3c6b72a16 ("mm/slub: fix a memory leak in sysfs_slab_add()") Acked-by: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Wang Hai <wanghai38@huawei.com> Cc: <stable@vger.kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 28 January 2021, 17:05:44 UTC |
| 29b3283 | Nadav Amit | 27 January 2021, 17:53:17 UTC | iommu/vt-d: Do not use flush-queue when caching-mode is on When an Intel IOMMU is virtualized, and a physical device is passed-through to the VM, changes of the virtual IOMMU need to be propagated to the physical IOMMU. The hypervisor therefore needs to monitor PTE mappings in the IOMMU page-tables. Intel specifications provide "caching-mode" capability that a virtual IOMMU uses to report that the IOMMU is virtualized and a TLB flush is needed after mapping to allow the hypervisor to propagate virtual IOMMU mappings to the physical IOMMU. To the best of my knowledge no real physical IOMMU reports "caching-mode" as turned on. Synchronizing the virtual and the physical IOMMU tables is expensive if the hypervisor is unaware which PTEs have changed, as the hypervisor is required to walk all the virtualized tables and look for changes. Consequently, domain flushes are much more expensive than page-specific flushes on virtualized IOMMUs with passthrough devices. The kernel therefore exploited the "caching-mode" indication to avoid domain flushing and use page-specific flushing in virtualized environments. See commit 78d5f0f500e6 ("intel-iommu: Avoid global flushes with caching mode.") This behavior changed after commit 13cf01744608 ("iommu/vt-d: Make use of iova deferred flushing"). Now, when batched TLB flushing is used (the default), full TLB domain flushes are performed frequently, requiring the hypervisor to perform expensive synchronization between the virtual TLB and the physical one. Getting batched TLB flushes to use page-specific invalidations again in such circumstances is not easy, since the TLB invalidation scheme assumes that "full" domain TLB flushes are performed for scalability. Disable batched TLB flushes when caching-mode is on, as the performance benefit from using batched TLB invalidations is likely to be much smaller than the overhead of the virtual-to-physical IOMMU page-tables synchronization. Fixes: 13cf01744608 ("iommu/vt-d: Make use of iova deferred flushing") Signed-off-by: Nadav Amit <namit@vmware.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Lu Baolu <baolu.lu@linux.intel.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: Will Deacon <will@kernel.org> Cc: stable@vger.kernel.org Acked-by: Lu Baolu <baolu.lu@linux.intel.com> Link: https://lore.kernel.org/r/20210127175317.1600473-1-namit@vmware.com Signed-off-by: Joerg Roedel <jroedel@suse.de> | 28 January 2021, 12:59:02 UTC |
| 494b368 | Lu Baolu | 19 January 2021, 04:35:00 UTC | iommu/vt-d: Correctly check addr alignment in qi_flush_dev_iotlb_pasid() An incorrect address mask is being used in the qi_flush_dev_iotlb_pasid() to check the address alignment. This leads to a lot of spurious kernel warnings: [ 485.837093] DMAR: Invalidate non-aligned address 7f76f47f9000, order 0 [ 485.837098] DMAR: Invalidate non-aligned address 7f76f47f9000, order 0 [ 492.494145] qi_flush_dev_iotlb_pasid: 5734 callbacks suppressed [ 492.494147] DMAR: Invalidate non-aligned address 7f7728800000, order 11 [ 492.508965] DMAR: Invalidate non-aligned address 7f7728800000, order 11 Fix it by checking the alignment in right way. Fixes: 288d08e780088 ("iommu/vt-d: Handle non-page aligned address") Reported-and-tested-by: Guo Kaijie <Kaijie.Guo@intel.com> Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Cc: Liu Yi L <yi.l.liu@intel.com> Link: https://lore.kernel.org/r/20210119043500.1539596-1-baolu.lu@linux.intel.com Signed-off-by: Joerg Roedel <jroedel@suse.de> | 28 January 2021, 12:17:08 UTC |
| a44092e | Suravee Suthikulpanit | 20 January 2021, 13:50:02 UTC | iommu/amd: Use IVHD EFR for early initialization of IOMMU features IOMMU Extended Feature Register (EFR) is used to communicate the supported features for each IOMMU to the IOMMU driver. This is normally read from the PCI MMIO register offset 0x30, and used by the iommu_feature() helper function. However, there are certain scenarios where the information is needed prior to PCI initialization, and the iommu_feature() function is used prematurely w/o warning. This has caused incorrect initialization of IOMMU. This is the case for the commit 6d39bdee238f ("iommu/amd: Enforce 4k mapping for certain IOMMU data structures") Since, the EFR is also available in the IVHD header, and is available to the driver prior to PCI initialization. Therefore, default to using the IVHD EFR instead. Fixes: 6d39bdee238f ("iommu/amd: Enforce 4k mapping for certain IOMMU data structures") Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com> Tested-by: Brijesh Singh <brijesh.singh@amd.com> Reviewed-by: Robert Richter <rrichter@amd.com> Link: https://lore.kernel.org/r/20210120135002.2682-1-suravee.suthikulpanit@amd.com Signed-off-by: Joerg Roedel <jroedel@suse.de> | 28 January 2021, 10:57:08 UTC |
| 44a674d | Jakub Kicinski | 28 January 2021, 03:18:37 UTC | Merge tag 'mlx5-fixes-2021-01-26' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux Saeed Mahameed says: ==================== mlx5 fixes 2021-01-26 This series introduces some fixes to mlx5 driver. * tag 'mlx5-fixes-2021-01-26' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux: net/mlx5: CT: Fix incorrect removal of tuple_nat_node from nat rhashtable net/mlx5e: Revert parameters on errors when changing MTU and LRO state without reset net/mlx5e: Revert parameters on errors when changing trust state without reset net/mlx5e: Correctly handle changing the number of queues when the interface is down net/mlx5e: Fix CT rule + encap slow path offload and deletion net/mlx5e: Disable hw-tc-offload when MLX5_CLS_ACT config is disabled net/mlx5: Maintain separate page trees for ECPF and PF functions net/mlx5e: Fix IPSEC stats net/mlx5e: Reduce tc unsupported key print level net/mlx5e: free page before return net/mlx5e: E-switch, Fix rate calculation for overflow net/mlx5: Fix memory leak on flow table creation error flow ==================== Link: https://lore.kernel.org/r/20210126234345.202096-1-saeedm@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> | 28 January 2021, 03:18:37 UTC |
| e41aec7 | Lijun Pan | 28 January 2021, 01:34:42 UTC | ibmvnic: Ensure that CRQ entry read are correctly ordered Ensure that received Command-Response Queue (CRQ) entries are properly read in order by the driver. dma_rmb barrier has been added before accessing the CRQ descriptor to ensure the entire descriptor is read before processing. Fixes: 032c5e82847a ("Driver for IBM System i/p VNIC protocol") Signed-off-by: Lijun Pan <ljp@linux.ibm.com> Link: https://lore.kernel.org/r/20210128013442.88319-1-ljp@linux.ibm.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> | 28 January 2021, 03:12:02 UTC |
| 0f764ee | Jakub Kicinski | 28 January 2021, 01:53:45 UTC | Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf Pablo Neira Ayuso says: ==================== Netfilter fixes for net 1) Honor stateful expressions defined in the set from the dynset extension. The set definition provides a stateful expression that must be used by the dynset expression in case it is specified. 2) Missing timeout extension in the set element in the dynset extension leads to inconsistent ruleset listing, not allowing the user to restore timeout and expiration on ruleset reload. 3) Do not dump the stateful expression from the dynset extension if it coming from the set definition. * git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf: netfilter: nft_dynset: dump expressions when set definition contains no expressions netfilter: nft_dynset: add timeout extension to template netfilter: nft_dynset: honor stateful expressions in set definition ==================== Link: https://lore.kernel.org/r/20210127132512.5472-1-pablo@netfilter.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> | 28 January 2021, 01:53:46 UTC |
| 45a8146 | Jakub Kicinski | 28 January 2021, 01:51:45 UTC | Merge tag 'linux-can-fixes-for-5.11-20210127' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can Marc Kleine-Budde says: ==================== pull-request: can 2021-01-27 The patch is by Dan Carpenter and fixes a potential information leak in can_fill_info(). * tag 'linux-can-fixes-for-5.11-20210127' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can: can: dev: prevent potential information leak in can_fill_info() ==================== Link: https://lore.kernel.org/r/20210127094028.2778793-1-mkl@pengutronix.de Signed-off-by: Jakub Kicinski <kuba@kernel.org> | 28 January 2021, 01:51:46 UTC |
| b770753 | Jakub Kicinski | 27 January 2021, 02:18:44 UTC | MAINTAINERS: add missing header for bonding include/net/bonding.h is missing from bonding entry. Link: https://lore.kernel.org/r/20210127021844.4071706-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> | 28 January 2021, 01:50:20 UTC |
| 5ae3a25 | Jakub Kicinski | 28 January 2021, 01:44:51 UTC | Merge branch '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue Anthony Nguyen says: ==================== Intel Wired LAN Driver Updates 2021-01-26 This series contains updates to the ice, i40e, and igc driver. Henry corrects setting an unspecified protocol to IPPROTO_NONE instead of 0 for IPv6 flexbytes filters for ice. Nick fixes the IPv6 extension header being processed incorrectly and updates the netdev->dev_addr if it exists in hardware as it may have been modified outside the ice driver. Brett ensures a user cannot request more channels than available LAN MSI-X and fixes the minimum allocation logic as it was incorrectly trying to use more MSI-X than allocated for ice. Stefan Assmann minimizes the delay between getting and using the VSI pointer to prevent a possible crash for i40e. Corinna Vinschen fixes link speed advertising for igc. * '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue: igc: fix link speed advertising i40e: acquire VSI pointer only after VF is initialized ice: Fix MSI-X vector fallback logic ice: Don't allow more channels than LAN MSI-X available ice: update dev_addr in ice_set_mac_address even if HW filter exists ice: Implement flow for IPv6 next header (extension header) ice: fix FDir IPv6 flexbyte ==================== Link: https://lore.kernel.org/r/20210126221035.658124-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> | 28 January 2021, 01:44:52 UTC |
| 3f96d64 | Vadim Fedorenko | 26 January 2021, 00:02:14 UTC | net: decnet: fix netdev refcount leaking on error path On building the route there is an assumption that the destination could be local. In this case loopback_dev is used to get the address. If the address is still cannot be retrieved dn_route_output_slow returns EADDRNOTAVAIL with loopback_dev reference taken. Cannot find hash for the fixes tag because this code was introduced long time ago. I don't think that this bug has ever fired but the patch is done just to have a consistent code base. Signed-off-by: Vadim Fedorenko <vfedorenko@novek.ru> Link: https://lore.kernel.org/r/1611619334-20955-1-git-send-email-vfedorenko@novek.ru Signed-off-by: Jakub Kicinski <kuba@kernel.org> | 28 January 2021, 01:33:46 UTC |
| 20776b4 | Rasmus Villemoes | 25 January 2021, 12:41:16 UTC | net: switchdev: don't set port_obj_info->handled true when -EOPNOTSUPP It's not true that switchdev_port_obj_notify() only inspects the ->handled field of "struct switchdev_notifier_port_obj_info" if call_switchdev_blocking_notifiers() returns 0 - there's a WARN_ON() triggering for a non-zero return combined with ->handled not being true. But the real problem here is that -EOPNOTSUPP is not being properly handled. The wrapper functions switchdev_handle_port_obj_add() et al change a return value of -EOPNOTSUPP to 0, and the treatment of ->handled in switchdev_port_obj_notify() seems to be designed to change that back to -EOPNOTSUPP in case nobody actually acted on the notifier (i.e., everybody returned -EOPNOTSUPP). Currently, as soon as some device down the stack passes the check_cb() check, ->handled gets set to true, which means that switchdev_port_obj_notify() cannot actually ever return -EOPNOTSUPP. This, for example, means that the detection of hardware offload support in the MRP code is broken: switchdev_port_obj_add() used by br_mrp_switchdev_send_ring_test() always returns 0, so since the MRP code thinks the generation of MRP test frames has been offloaded, no such frames are actually put on the wire. Similarly, br_mrp_switchdev_set_ring_role() also always returns 0, causing mrp->ring_role_offloaded to be set to 1. To fix this, continue to set ->handled true if any callback returns success or any error distinct from -EOPNOTSUPP. But if all the callbacks return -EOPNOTSUPP, make sure that ->handled stays false, so the logic in switchdev_port_obj_notify() can propagate that information. Fixes: 9a9f26e8f7ea ("bridge: mrp: Connect MRP API with the switchdev API") Fixes: f30f0601eb93 ("switchdev: Add helpers to aid traversal through lower devices") Reviewed-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk> Link: https://lore.kernel.org/r/20210125124116.102928-1-rasmus.villemoes@prevas.dk Signed-off-by: Jakub Kicinski <kuba@kernel.org> | 28 January 2021, 00:41:59 UTC |
| 76c057c | Linus Torvalds | 27 January 2021, 19:06:15 UTC | Merge branch 'parisc-5.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux Pull parisc fixes from Helge Deller: "Two small fixes: - Fix linking error with 64-bit kernel when modules are disabled, reported by kernel test robot - Remove leftover reference to power_tasklet, by Davidlohr Bueso" * 'parisc-5.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: Enable -mlong-calls gcc option by default when !CONFIG_MODULES parisc: Remove leftover reference to the power_tasklet | 27 January 2021, 19:06:15 UTC |
| 6195ba0 | Hao Xu | 27 January 2021, 07:14:09 UTC | io_uring: fix flush cqring overflow list while TASK_INTERRUPTIBLE Abaci reported the follow warning: [ 27.073425] do not call blocking ops when !TASK_RUNNING; state=1 set at [] prepare_to_wait_exclusive+0x3a/0xc0 [ 27.075805] WARNING: CPU: 0 PID: 951 at kernel/sched/core.c:7853 __might_sleep+0x80/0xa0 [ 27.077604] Modules linked in: [ 27.078379] CPU: 0 PID: 951 Comm: a.out Not tainted 5.11.0-rc3+ #1 [ 27.079637] Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011 [ 27.080852] RIP: 0010:__might_sleep+0x80/0xa0 [ 27.081835] Code: 65 48 8b 04 25 80 71 01 00 48 8b 90 c0 15 00 00 48 8b 70 18 48 c7 c7 08 39 95 82 c6 05 f9 5f de 08 01 48 89 d1 e8 00 c6 fa ff 0b eb bf 41 0f b6 f5 48 c7 c7 40 23 c9 82 e8 f3 48 ec 00 eb a7 [ 27.084521] RSP: 0018:ffffc90000fe3ce8 EFLAGS: 00010286 [ 27.085350] RAX: 0000000000000000 RBX: ffffffff82956083 RCX: 0000000000000000 [ 27.086348] RDX: ffff8881057a0000 RSI: ffffffff8118cc9e RDI: ffff88813bc28570 [ 27.087598] RBP: 00000000000003a7 R08: 0000000000000001 R09: 0000000000000001 [ 27.088819] R10: ffffc90000fe3e00 R11: 00000000fffef9f0 R12: 0000000000000000 [ 27.089819] R13: 0000000000000000 R14: ffff88810576eb80 R15: ffff88810576e800 [ 27.091058] FS: 00007f7b144cf740(0000) GS:ffff88813bc00000(0000) knlGS:0000000000000000 [ 27.092775] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 27.093796] CR2: 00000000022da7b8 CR3: 000000010b928002 CR4: 00000000003706f0 [ 27.094778] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 27.095780] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 27.097011] Call Trace: [ 27.097685] __mutex_lock+0x5d/0xa30 [ 27.098565] ? prepare_to_wait_exclusive+0x71/0xc0 [ 27.099412] ? io_cqring_overflow_flush.part.101+0x6d/0x70 [ 27.100441] ? lockdep_hardirqs_on_prepare+0xe9/0x1c0 [ 27.101537] ? _raw_spin_unlock_irqrestore+0x2d/0x40 [ 27.102656] ? trace_hardirqs_on+0x46/0x110 [ 27.103459] ? io_cqring_overflow_flush.part.101+0x6d/0x70 [ 27.104317] io_cqring_overflow_flush.part.101+0x6d/0x70 [ 27.105113] io_cqring_wait+0x36e/0x4d0 [ 27.105770] ? find_held_lock+0x28/0xb0 [ 27.106370] ? io_uring_remove_task_files+0xa0/0xa0 [ 27.107076] __x64_sys_io_uring_enter+0x4fb/0x640 [ 27.107801] ? rcu_read_lock_sched_held+0x59/0xa0 [ 27.108562] ? lockdep_hardirqs_on_prepare+0xe9/0x1c0 [ 27.109684] ? syscall_enter_from_user_mode+0x26/0x70 [ 27.110731] do_syscall_64+0x2d/0x40 [ 27.111296] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 27.112056] RIP: 0033:0x7f7b13dc8239 [ 27.112663] Code: 01 00 48 81 c4 80 00 00 00 e9 f1 fe ff ff 0f 1f 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 3d 01 f0 ff ff 73 01 c3 48 8b 0d 27 ec 2c 00 f7 d8 64 89 01 48 [ 27.115113] RSP: 002b:00007ffd6d7f5c88 EFLAGS: 00000286 ORIG_RAX: 00000000000001aa [ 27.116562] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f7b13dc8239 [ 27.117961] RDX: 000000000000478e RSI: 0000000000000000 RDI: 0000000000000003 [ 27.118925] RBP: 00007ffd6d7f5cb0 R08: 0000000020000040 R09: 0000000000000008 [ 27.119773] R10: 0000000000000001 R11: 0000000000000286 R12: 0000000000400480 [ 27.120614] R13: 00007ffd6d7f5d90 R14: 0000000000000000 R15: 0000000000000000 [ 27.121490] irq event stamp: 5635 [ 27.121946] hardirqs last enabled at (5643): [] console_unlock+0x5c4/0x740 [ 27.123476] hardirqs last disabled at (5652): [] console_unlock+0x4e7/0x740 [ 27.125192] softirqs last enabled at (5272): [] __do_softirq+0x3c5/0x5aa [ 27.126430] softirqs last disabled at (5267): [] asm_call_irq_on_stack+0xf/0x20 [ 27.127634] ---[ end trace 289d7e28fa60f928 ]--- This is caused by calling io_cqring_overflow_flush() which may sleep after calling prepare_to_wait_exclusive() which set task state to TASK_INTERRUPTIBLE Reported-by: Abaci <abaci@linux.alibaba.com> Fixes: 6c503150ae33 ("io_uring: patch up IOPOLL overflow_flush sync") Reviewed-by: Pavel Begunkov <asml.silence@gmail.com> Signed-off-by: Hao Xu <haoxu@linux.alibaba.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> | 27 January 2021, 16:18:28 UTC |
| 2e92493 | Juergen Gross | 25 January 2021, 13:42:07 UTC | x86/xen: avoid warning in Xen pv guest with CONFIG_AMD_MEM_ENCRYPT enabled When booting a kernel which has been built with CONFIG_AMD_MEM_ENCRYPT enabled as a Xen pv guest a warning is issued for each processor: [ 5.964347] ------------[ cut here ]------------ [ 5.968314] WARNING: CPU: 0 PID: 1 at /home/gross/linux/head/arch/x86/xen/enlighten_pv.c:660 get_trap_addr+0x59/0x90 [ 5.972321] Modules linked in: [ 5.976313] CPU: 0 PID: 1 Comm: swapper/0 Tainted: G W 5.11.0-rc5-default #75 [ 5.980313] Hardware name: Dell Inc. OptiPlex 9020/0PC5F7, BIOS A05 12/05/2013 [ 5.984313] RIP: e030:get_trap_addr+0x59/0x90 [ 5.988313] Code: 42 10 83 f0 01 85 f6 74 04 84 c0 75 1d b8 01 00 00 00 c3 48 3d 00 80 83 82 72 08 48 3d 20 81 83 82 72 0c b8 01 00 00 00 eb db <0f> 0b 31 c0 c3 48 2d 00 80 83 82 48 ba 72 1c c7 71 1c c7 71 1c 48 [ 5.992313] RSP: e02b:ffffc90040033d38 EFLAGS: 00010202 [ 5.996313] RAX: 0000000000000001 RBX: ffffffff82a141d0 RCX: ffffffff8222ec38 [ 6.000312] RDX: ffffffff8222ec38 RSI: 0000000000000005 RDI: ffffc90040033d40 [ 6.004313] RBP: ffff8881003984a0 R08: 0000000000000007 R09: ffff888100398000 [ 6.008312] R10: 0000000000000007 R11: ffffc90040246000 R12: ffff8884082182a8 [ 6.012313] R13: 0000000000000100 R14: 000000000000001d R15: ffff8881003982d0 [ 6.016316] FS: 0000000000000000(0000) GS:ffff888408200000(0000) knlGS:0000000000000000 [ 6.020313] CS: e030 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 6.024313] CR2: ffffc900020ef000 CR3: 000000000220a000 CR4: 0000000000050660 [ 6.028314] Call Trace: [ 6.032313] cvt_gate_to_trap.part.7+0x3f/0x90 [ 6.036313] ? asm_exc_double_fault+0x30/0x30 [ 6.040313] xen_convert_trap_info+0x87/0xd0 [ 6.044313] xen_pv_cpu_up+0x17a/0x450 [ 6.048313] bringup_cpu+0x2b/0xc0 [ 6.052313] ? cpus_read_trylock+0x50/0x50 [ 6.056313] cpuhp_invoke_callback+0x80/0x4c0 [ 6.060313] _cpu_up+0xa7/0x140 [ 6.064313] cpu_up+0x98/0xd0 [ 6.068313] bringup_nonboot_cpus+0x4f/0x60 [ 6.072313] smp_init+0x26/0x79 [ 6.076313] kernel_init_freeable+0x103/0x258 [ 6.080313] ? rest_init+0xd0/0xd0 [ 6.084313] kernel_init+0xa/0x110 [ 6.088313] ret_from_fork+0x1f/0x30 [ 6.092313] ---[ end trace be9ecf17dceeb4f3 ]--- Reason is that there is no Xen pv trap entry for X86_TRAP_VC. Fix that by adding a generic trap handler for unknown traps and wire all unknown bare metal handlers to this generic handler, which will just crash the system in case such a trap will ever happen. Fixes: 0786138c78e793 ("x86/sev-es: Add a Runtime #VC Exception Handler") Cc: <stable@vger.kernel.org> # v5.10 Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com> Signed-off-by: Juergen Gross <jgross@suse.com> | 27 January 2021, 14:45:29 UTC |
| b552766 | Dan Carpenter | 21 January 2021, 06:08:05 UTC | can: dev: prevent potential information leak in can_fill_info() The "bec" struct isn't necessarily always initialized. For example, the mcp251xfd_get_berr_counter() function doesn't initialize anything if the interface is down. Fixes: 52c793f24054 ("can: netlink support for bus-error reporting and counters") Link: https://lore.kernel.org/r/YAkaRdRJncsJO8Ve@mwanda Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> | 27 January 2021, 09:25:01 UTC |
| 5f46400 | David Woodhouse | 26 January 2021, 17:01:49 UTC | xen: Fix XenStore initialisation for XS_LOCAL In commit 3499ba8198ca ("xen: Fix event channel callback via INTX/GSI") I reworked the triggering of xenbus_probe(). I tried to simplify things by taking out the workqueue based startup triggered from wake_waiting(); the somewhat poorly named xenbus IRQ handler. I missed the fact that in the XS_LOCAL case (Dom0 starting its own xenstored or xenstore-stubdom, which happens after the kernel is booted completely), that IRQ-based trigger is still actually needed. So... put it back, except more cleanly. By just spawning a xenbus_probe thread which waits on xb_waitq and runs the probe the first time it gets woken, just as the workqueue-based hack did. This is actually a nicer approach for *all* the back ends with different interrupt methods, and we can switch them all over to that without the complex conditions for when to trigger it. But not in -rc6. This is the minimal fix for the regression, although it's a step in the right direction instead of doing a partial revert and actually putting the workqueue back. It's also simpler than the workqueue. Fixes: 3499ba8198ca ("xen: Fix event channel callback via INTX/GSI") Reported-by: Juergen Gross <jgross@suse.com> Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Reviewed-by: Juergen Gross <jgross@suse.com> Link: https://lore.kernel.org/r/4c9af052a6e0f6485d1de43f2c38b1461996db99.camel@infradead.org Signed-off-by: Juergen Gross <jgross@suse.com> | 27 January 2021, 07:59:52 UTC |
| 907d1df | Pavel Begunkov | 26 January 2021, 23:35:10 UTC | io_uring: fix wqe->lock/completion_lock deadlock Joseph reports following deadlock: CPU0: ... io_kill_linked_timeout // &ctx->completion_lock io_commit_cqring __io_queue_deferred __io_queue_async_work io_wq_enqueue io_wqe_enqueue // &wqe->lock CPU1: ... __io_uring_files_cancel io_wq_cancel_cb io_wqe_cancel_pending_work // &wqe->lock io_cancel_task_cb // &ctx->completion_lock Only __io_queue_deferred() calls queue_async_work() while holding ctx->completion_lock, enqueue drained requests via io_req_task_queue() instead. Cc: stable@vger.kernel.org # 5.9+ Reported-by: Joseph Qi <joseph.qi@linux.alibaba.com> Tested-by: Joseph Qi <joseph.qi@linux.alibaba.com> Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> | 27 January 2021, 02:36:55 UTC |
| 2bd2974 | Jakub Kicinski | 27 January 2021, 02:23:39 UTC | Merge branch 'net-fec-fix-temporary-rmii-clock-reset-on-link-up' Laurent Badel says: ==================== net: fec: Fix temporary RMII clock reset on link up v2: fixed a compilation warning The FEC drivers performs a "hardware reset" of the MAC module when the link is reported to be up. This causes a short glitch in the RMII clock due to the hardware reset clearing the receive control register which controls the MII mode. It seems that some link partners do not tolerate this glitch, and invalidate the link, which leads to a never-ending loop of negotiation-link up-link down events. This was observed with the iMX28 Soc and LAN8720/LAN8742 PHYs, with two Intel adapters I218-LM and X722-DA2 as link partners, though a number of other link partners do not seem to mind the clock glitch. Changing the hardware reset to a software reset (clearing bit 1 of the ECR register) cured the issue. Attempts to optimize fec_restart() in order to minimize the duration of the glitch were unsuccessful. Furthermore manually producing the glitch by setting MII mode and then back to RMII in two consecutive instructions, resulting in a clock glitch <10us in duration, was enough to cause the partner to invalidate the link. This strongly suggests that the root cause of the link being dropped is indeed the change in clock frequency. In an effort to minimize changes to driver, the patch proposes to use soft reset only for tested SoCs (iMX28) and only if the link is up. This preserves hardware reset in other situations, which might be required for proper setup of the MAC. ==================== Link: https://lore.kernel.org/r/20210125100745.5090-1-laurentbadel@eaton.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> | 27 January 2021, 02:24:46 UTC |
| c730ab4 | Laurent Badel | 25 January 2021, 10:07:45 UTC | net: fec: Fix temporary RMII clock reset on link up fec_restart() does a hard reset of the MAC module when the link status changes to up. This temporarily resets the R_CNTRL register which controls the MII mode of the ENET_OUT clock. In the case of RMII, the clock frequency momentarily drops from 50MHz to 25MHz until the register is reconfigured. Some link partners do not tolerate this glitch and invalidate the link causing failure to establish a stable link when using PHY polling mode. Since as per IEEE802.3 the criteria for link validity are PHY-specific, what the partner should tolerate cannot be assumed, so avoid resetting the MII clock by using software reset instead of hardware reset when the link is up. This is generally relevant only if the SoC provides the clock to an external PHY and the PHY is configured for RMII. Signed-off-by: Laurent Badel <laurentbadel@eaton.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> | 27 January 2021, 02:24:39 UTC |
| b491e6a | Xie He | 26 January 2021, 04:09:39 UTC | net: lapb: Add locking to the lapb module In the lapb module, the timers may run concurrently with other code in this module, and there is currently no locking to prevent the code from racing on "struct lapb_cb". This patch adds locking to prevent racing. 1. Add "spinlock_t lock" to "struct lapb_cb"; Add "spin_lock_bh" and "spin_unlock_bh" to APIs, timer functions and notifier functions. 2. Add "bool t1timer_stop, t2timer_stop" to "struct lapb_cb" to make us able to ask running timers to abort; Modify "lapb_stop_t1timer" and "lapb_stop_t2timer" to make them able to abort running timers; Modify "lapb_t2timer_expiry" and "lapb_t1timer_expiry" to make them abort after they are stopped by "lapb_stop_t1timer", "lapb_stop_t2timer", and "lapb_start_t1timer", "lapb_start_t2timer". 3. Let lapb_unregister wait for other API functions and running timers to stop. 4. The lapb_device_event function calls lapb_disconnect_request. In order to avoid trying to hold the lock twice, add a new function named "__lapb_disconnect_request" which assumes the lock is held, and make it called by lapb_disconnect_request and lapb_device_event. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: Martin Schiller <ms@dev.tdt.de> Signed-off-by: Xie He <xie.he.0141@gmail.com> Link: https://lore.kernel.org/r/20210126040939.69995-1-xie.he.0141@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> | 27 January 2021, 01:53:45 UTC |
| f0947d0 | Ivan Vecera | 25 January 2021, 07:44:16 UTC | team: protect features update by RCU to avoid deadlock Function __team_compute_features() is protected by team->lock mutex when it is called from team_compute_features() used when features of an underlying device is changed. This causes a deadlock when NETDEV_FEAT_CHANGE notifier for underlying device is fired due to change propagated from team driver (e.g. MTU change). It's because callbacks like team_change_mtu() or team_vlan_rx_{add,del}_vid() protect their port list traversal by team->lock mutex. Example (r8169 case where this driver disables TSO for certain MTU values): ... [ 6391.348202] __mutex_lock.isra.6+0x2d0/0x4a0 [ 6391.358602] team_device_event+0x9d/0x160 [team] [ 6391.363756] notifier_call_chain+0x47/0x70 [ 6391.368329] netdev_update_features+0x56/0x60 [ 6391.373207] rtl8169_change_mtu+0x14/0x50 [r8169] [ 6391.378457] dev_set_mtu_ext+0xe1/0x1d0 [ 6391.387022] dev_set_mtu+0x52/0x90 [ 6391.390820] team_change_mtu+0x64/0xf0 [team] [ 6391.395683] dev_set_mtu_ext+0xe1/0x1d0 [ 6391.399963] do_setlink+0x231/0xf50 ... In fact team_compute_features() called from team_device_event() does not need to be protected by team->lock mutex and rcu_read_lock() is sufficient there for port list traversal. Fixes: 3d249d4ca7d0 ("net: introduce ethernet teaming device") Cc: Saeed Mahameed <saeed@kernel.org> Signed-off-by: Ivan Vecera <ivecera@redhat.com> Reviewed-by: Cong Wang <xiyou.wangcong@gmail.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Link: https://lore.kernel.org/r/20210125074416.4056484-1-ivecera@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> | 27 January 2021, 01:08:59 UTC |
| 5cfeb56 | Jakub Kicinski | 22 January 2021, 17:32:20 UTC | MAINTAINERS: add David Ahern to IPv4/IPv6 maintainers David has been the de-facto maintainer for much of the IP code for the last couple of years, let's make it official. Link: https://lore.kernel.org/r/20210122173220.3579491-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> | 27 January 2021, 00:46:32 UTC |
| e2194a1 | Paul Blakey | 25 January 2021, 15:31:26 UTC | net/mlx5: CT: Fix incorrect removal of tuple_nat_node from nat rhashtable If a non nat tuple entry is inserted just to the regular tuples rhashtable (ct_tuples_ht) and not to natted tuples rhashtable (ct_nat_tuples_ht). Commit bc562be9674b ("net/mlx5e: CT: Save ct entries tuples in hashtables") mixed up the return labels and names sot that on cleanup or failure we still try to remove for the natted tuples rhashtable. Fix that by correctly checking if a natted tuples insertion before removing it. While here make it more readable. Fixes: bc562be9674b ("net/mlx5e: CT: Save ct entries tuples in hashtables") Reviewed-by: Roi Dayan <roid@nvidia.com> Signed-off-by: Paul Blakey <paulb@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> | 26 January 2021, 23:39:04 UTC |
| 8355060 | Maxim Mikityanskiy | 11 December 2020, 14:05:01 UTC | net/mlx5e: Revert parameters on errors when changing MTU and LRO state without reset Sometimes, channel params are changed without recreating the channels. It happens in two basic cases: when the channels are closed, and when the parameter being changed doesn't affect how channels are configured. Such changes invoke a hardware command that might fail. The whole operation should be reverted in such cases, but the code that restores the parameters' values in the driver was missing. This commit adds this handling. Fixes: 2e20a151205b ("net/mlx5e: Fail safe mtu and lro setting") Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> | 26 January 2021, 23:39:01 UTC |
| 912c9b5 | Maxim Mikityanskiy | 14 January 2021, 10:34:01 UTC | net/mlx5e: Revert parameters on errors when changing trust state without reset Trust state may be changed without recreating the channels. It happens when the channels are closed, and when channel parameters (min inline mode) stay the same after changing the trust state. Changing the trust state is a hardware command that may fail. The current code didn't restore the channel parameters to their old values if an error happened and the channels were closed. This commit adds handling for this case. Fixes: 6e0504c69811 ("net/mlx5e: Change inline mode correctly when changing trust state") Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> | 26 January 2021, 23:38:58 UTC |
| 57ac4a3 | Maxim Mikityanskiy | 11 December 2020, 10:56:56 UTC | net/mlx5e: Correctly handle changing the number of queues when the interface is down This commit addresses two issues related to changing the number of queues when the channels are closed: 1. Missing call to mlx5e_num_channels_changed to update real_num_tx_queues when the number of TCs is changed. 2. When mlx5e_num_channels_changed returns an error, the channel parameters must be reverted. Two Fixes: tags correspond to the first commits where these two issues were introduced. Fixes: 3909a12e7913 ("net/mlx5e: Fix configuration of XPS cpumasks and netdev queues in corner cases") Fixes: fa3748775b92 ("net/mlx5e: Handle errors from netif_set_real_num_{tx,rx}_queues") Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> | 26 January 2021, 23:38:56 UTC |
| 89e3946 | Paul Blakey | 21 January 2021, 08:06:45 UTC | net/mlx5e: Fix CT rule + encap slow path offload and deletion Currently, if a neighbour isn't valid when offloading tunnel encap rules, we offload the original match and replace the original action with "goto slow path" action. For this we use a temporary flow attribute based on the original flow attribute and then change the action. Flow flags, which among those is the CT flag, are still shared for the slow path rule offload, so we end up parsing this flow as a CT + goto slow path rule. Besides being unnecessary, CT action offload saves extra information in the passed flow attribute, such as created ct_flow and mod_hdr, which is lost onces the temporary flow attribute is freed. When a neigh is updated and is valid, we offload the original CT rule with original CT action, which again creates a ct_flow and mod_hdr and saves it in the flow's original attribute. Then we delete the slow path rule with a temporary flow attribute based on original updated flow attribute, and we free the relevant ct_flow and mod_hdr. Then when tc deletes this flow, we try to free the ct_flow and mod_hdr on the flow's attribute again. To fix the issue, skip all furture proccesing (CT/Sample/Split rules) in offload/unoffload of slow path rules. Call trace: [ 758.850525] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000218 [ 758.952987] Internal error: Oops: 96000005 [#1] PREEMPT SMP [ 758.964170] Modules linked in: act_csum(E) act_pedit(E) act_tunnel_key(E) act_ct(E) nf_flow_table(E) xt_nat(E) ip6table_filter(E) ip6table_nat(E) xt_comment(E) ip6_tables(E) xt_conntrack(E) xt_MASQUERADE(E) nf_conntrack_netlink(E) xt_addrtype(E) iptable_filter(E) iptable_nat(E) bpfilter(E) br_netfilter(E) bridge(E) stp(E) llc(E) xfrm_user(E) overlay(E) act_mirred(E) act_skbedit(E) rdma_ucm(OE) rdma_cm(OE) iw_cm(OE) ib_ipoib(OE) ib_cm(OE) ib_umad(OE) esp6_offload(E) esp6(E) esp4_offload(E) esp4(E) xfrm_algo(E) mlx5_ib(OE) ib_uverbs(OE) geneve(E) ip6_udp_tunnel(E) udp_tunnel(E) nfnetlink_cttimeout(E) nfnetlink(E) mlx5_core(OE) act_gact(E) cls_flower(E) sch_ingress(E) openvswitch(E) nsh(E) nf_conncount(E) nf_nat(E) mlxfw(OE) psample(E) nf_conntrack(E) nf_defrag_ipv4(E) vfio_mdev(E) mdev(E) ib_core(OE) mlx_compat(OE) crct10dif_ce(E) uio_pdrv_genirq(E) uio(E) i2c_mlx(E) mlxbf_pmc(E) sbsa_gwdt(E) mlxbf_gige(E) gpio_mlxbf2(E) mlxbf_pka(E) mlx_trio(E) mlx_bootctl(E) bluefield_edac(E) knem(O) [ 758.964225] ip_tables(E) mlxbf_tmfifo(E) ipv6(E) crc_ccitt(E) nf_defrag_ipv6(E) [ 759.154186] CPU: 5 PID: 122 Comm: kworker/u16:1 Tainted: G OE 5.4.60-mlnx.52.gde81e85 #1 [ 759.172870] Hardware name: https://www.mellanox.com BlueField SoC/BlueField SoC, BIOS BlueField:3.5.0-2-gc1b5d64 Jan 4 2021 [ 759.195466] Workqueue: mlx5e mlx5e_rep_neigh_update [mlx5_core] [ 759.207344] pstate: a0000005 (NzCv daif -PAN -UAO) [ 759.217003] pc : mlx5_del_flow_rules+0x5c/0x160 [mlx5_core] [ 759.228229] lr : mlx5_del_flow_rules+0x34/0x160 [mlx5_core] [ 759.405858] Call trace: [ 759.410804] mlx5_del_flow_rules+0x5c/0x160 [mlx5_core] [ 759.421337] __mlx5_eswitch_del_rule.isra.43+0x5c/0x1c8 [mlx5_core] [ 759.433963] mlx5_eswitch_del_offloaded_rule_ct+0x34/0x40 [mlx5_core] [ 759.446942] mlx5_tc_rule_delete_ct+0x68/0x74 [mlx5_core] [ 759.457821] mlx5_tc_ct_delete_flow+0x160/0x21c [mlx5_core] [ 759.469051] mlx5e_tc_unoffload_fdb_rules+0x158/0x168 [mlx5_core] [ 759.481325] mlx5e_tc_encap_flows_del+0x140/0x26c [mlx5_core] [ 759.492901] mlx5e_rep_update_flows+0x11c/0x1ec [mlx5_core] [ 759.504127] mlx5e_rep_neigh_update+0x160/0x200 [mlx5_core] [ 759.515314] process_one_work+0x178/0x400 [ 759.523350] worker_thread+0x58/0x3e8 [ 759.530685] kthread+0x100/0x12c [ 759.537152] ret_from_fork+0x10/0x18 [ 759.544320] Code: 97ffef55 51000673 3100067f 54ffff41 (b9421ab3) [ 759.556548] ---[ end trace fab818bb1085832d ]--- Fixes: 4c3844d9e97e ("net/mlx5e: CT: Introduce connection tracking") Signed-off-by: Paul Blakey <paulb@nvidia.com> Reviewed-by: Roi Dayan <roid@nvidia.com> Reviewed-by: Vlad Buslov <vladbu@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> | 26 January 2021, 23:38:53 UTC |
| 156878d | Maor Dickman | 24 January 2021, 15:21:25 UTC | net/mlx5e: Disable hw-tc-offload when MLX5_CLS_ACT config is disabled The cited commit introduce new CONFIG_MLX5_CLS_ACT kconfig variable to control compilation of TC hardware offloads implementation. When this configuration is disabled the driver is still wrongly reports in ethtool that hw-tc-offload is supported. Fixed by reporting hw-tc-offload is supported only when CONFIG_MLX5_CLS_ACT is enabled. Fixes: d956873f908c ("net/mlx5e: Introduce kconfig var for TC support") Signed-off-by: Maor Dickman <maord@nvidia.com> Reviewed-by: Vlad Buslov <vladbu@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> | 26 January 2021, 23:38:51 UTC |
| 0aa1284 | Daniel Jurgens | 22 January 2021, 21:13:53 UTC | net/mlx5: Maintain separate page trees for ECPF and PF functions Pages for the host PF and ECPF were stored in the same tree, so the ECPF pages were being freed along with the host PF's when the host driver unloaded. Combine the function ID and ECPF flag to use as an index into the x-array containing the trees to get a different tree for the host PF and ECPF. Fixes: c6168161f693 ("net/mlx5: Add support for release all pages event") Signed-off-by: Daniel Jurgens <danielj@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> | 26 January 2021, 23:38:48 UTC |
| 45c9a30 | Maxim Mikityanskiy | 25 November 2020, 11:52:36 UTC | net/mlx5e: Fix IPSEC stats When IPSEC offload isn't active, the number of stats is not zero, but the strings are not filled, leading to exposing stats with empty names. Fix this by using the same condition for NUM_STATS and FILL_STRS. Fixes: 0aab3e1b04ae ("net/mlx5e: IPSec, Expose IPsec HW stat only for supporting HW") Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com> Reviewed-by: Raed Salem <raeds@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> | 26 January 2021, 23:38:46 UTC |
| 48470a9 | Maor Dickman | 19 January 2021, 15:21:38 UTC | net/mlx5e: Reduce tc unsupported key print level "Unsupported key used:" appears in kernel log when flows with unsupported key are used, arp fields for example. OpenVSwitch was changed to match on arp fields by default that caused this warning to appear in kernel log for every arp rule, which can be a lot. Fix by lowering print level from warning to debug. Fixes: e3a2b7ed018e ("net/mlx5e: Support offload cls_flower with drop action") Signed-off-by: Maor Dickman <maord@nvidia.com> Reviewed-by: Roi Dayan <roid@nvidia.com> Reviewed-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> | 26 January 2021, 23:38:43 UTC |
| 258ed19 | Pan Bian | 21 January 2021, 04:58:30 UTC | net/mlx5e: free page before return Instead of directly return, goto the error handling label to free allocated page. Fixes: 5f29458b77d5 ("net/mlx5e: Support dump callback in TX reporter") Signed-off-by: Pan Bian <bianpan2016@163.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> | 26 January 2021, 23:38:41 UTC |
| 1fe3e31 | Parav Pandit | 12 January 2021, 14:13:22 UTC | net/mlx5e: E-switch, Fix rate calculation for overflow rate_bytes_ps is a 64-bit field. It passed as 32-bit field to apply_police_params(). Due to this when police rate is higher than 4Gbps, 32-bit calculation ignores the carry. This results in incorrect rate configurationn the device. Fix it by performing 64-bit calculation. Fixes: fcb64c0f5640 ("net/mlx5: E-Switch, add ingress rate support") Signed-off-by: Parav Pandit <parav@nvidia.com> Reviewed-by: Eli Cohen <elic@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> | 26 January 2021, 23:38:38 UTC |
| 487c6ef | Roi Dayan | 12 January 2021, 12:04:29 UTC | net/mlx5: Fix memory leak on flow table creation error flow When we create the ft object we also init rhltable in ft->fgs_hash. So in error flow before kfree of ft we need to destroy that rhltable. Fixes: 693c6883bbc4 ("net/mlx5: Add hash table for flow groups in flow table") Signed-off-by: Roi Dayan <roid@nvidia.com> Reviewed-by: Maor Dickman <maord@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> | 26 January 2021, 23:38:36 UTC |
| c5e9e8d | Jakub Kicinski | 26 January 2021, 23:23:17 UTC | Merge tag 'mac80211-for-net-2021-01-26' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211 Johannes Berg says: ==================== A couple of fixes: * fix 160 MHz channel switch in mac80211 * fix a staging driver to not deadlock due to some recent cfg80211 changes * fix NULL-ptr deref if cfg80211 returns -EINPROGRESS to wext (syzbot) * pause TX in mac80211 in type change to prevent crashes (syzbot) * tag 'mac80211-for-net-2021-01-26' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211: staging: rtl8723bs: fix wireless regulatory API misuse mac80211: pause TX while changing interface type wext: fix NULL-ptr-dereference with cfg80211's lack of commit() mac80211: 160MHz with extended NSS BW in CSA ==================== Link: https://lore.kernel.org/r/20210126130529.75225-1-johannes@sipsolutions.net Signed-off-by: Jakub Kicinski <kuba@kernel.org> | 26 January 2021, 23:23:18 UTC |
| db22ce6 | Jakub Kicinski | 26 January 2021, 23:16:39 UTC | Merge tag 'wireless-drivers-2021-01-26' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers Kalle Valo says: ==================== wireless-drivers fixes for v5.11 Second set of fixes for v5.11. Like in last time we again have more fixes than usual Actually a bit too much for my liking in this state of the cycle, but due to unrelated challenges I was only able to submit them now. We have few important crash fixes, iwlwifi modifying read-only data being the most reported issue, and also smaller fixes to iwlwifi. mt76 * fix a clang warning about enum usage * fix rx buffer refcounting crash mt7601u * fix rx buffer refcounting crash * fix crash when unbplugging the device iwlwifi * fix a crash where we were modifying read-only firmware data * lots of smaller fixes all over the driver * tag 'wireless-drivers-2021-01-26' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers: (24 commits) mt7601u: fix kernel crash unplugging the device iwlwifi: queue: bail out on invalid freeing iwlwifi: mvm: guard against device removal in reprobe iwlwifi: Fix IWL_SUBDEVICE_NO_160 macro to use the correct bit. iwlwifi: mvm: clear IN_D3 after wowlan status cmd iwlwifi: pcie: add rules to match Qu with Hr2 iwlwifi: mvm: invalidate IDs of internal stations at mvm start iwlwifi: mvm: fix the return type for DSM functions 1 and 2 iwlwifi: pcie: reschedule in long-running memory reads iwlwifi: pcie: use jiffies for memory read spin time limit iwlwifi: pcie: fix context info memory leak iwlwifi: pcie: add a NULL check in iwl_pcie_txq_unmap iwlwifi: pcie: set LTR on more devices iwlwifi: queue: don't crash if txq->entries is NULL iwlwifi: fix the NMI flow for old devices iwlwifi: pnvm: don't try to load after failures iwlwifi: pnvm: don't skip everything when not reloading iwlwifi: pcie: avoid potential PNVM leaks iwlwifi: mvm: take mutex for calling iwl_mvm_get_sync_time() iwlwifi: mvm: skip power command when unbinding vif during CSA ... ==================== Link: https://lore.kernel.org/r/20210126092202.6A367C433CA@smtp.codeaurora.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> | 26 January 2021, 23:16:40 UTC |
| 81a86e1 | Eric Dumazet | 25 January 2021, 15:09:49 UTC | iwlwifi: provide gso_type to GSO packets net/core/tso.c got recent support for USO, and this broke iwlfifi because the driver implemented a limited form of GSO. Providing ->gso_type allows for skb_is_gso_tcp() to provide a correct result. Fixes: 3d5b459ba0e3 ("net: tso: add UDP segmentation support") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Ben Greear <greearb@candelatech.com> Tested-by: Ben Greear <greearb@candelatech.com> Cc: Luca Coelho <luciano.coelho@intel.com> Cc: Johannes Berg <johannes@sipsolutions.net> Link: https://bugzilla.kernel.org/show_bug.cgi?id=209913 Link: https://lore.kernel.org/r/20210125150949.619309-1-eric.dumazet@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> | 26 January 2021, 23:13:49 UTC |
| 329a367 | Corinna Vinschen | 17 November 2020, 19:50:40 UTC | igc: fix link speed advertising Link speed advertising in igc has two problems: - When setting the advertisement via ethtool, the link speed is converted to the legacy 32 bit representation for the intel PHY code. This inadvertently drops ETHTOOL_LINK_MODE_2500baseT_Full_BIT (being beyond bit 31). As a result, any call to `ethtool -s ...' drops the 2500Mbit/s link speed from the PHY settings. Only reloading the driver alleviates that problem. Fix this by converting the ETHTOOL_LINK_MODE_2500baseT_Full_BIT to the Intel PHY ADVERTISE_2500_FULL bit explicitly. - Rather than checking the actual PHY setting, the .get_link_ksettings function always fills link_modes.advertising with all link speeds the device is capable of. Fix this by checking the PHY autoneg_advertised settings and report only the actually advertised speeds up to ethtool. Fixes: 8c5ad0dae93c ("igc: Add ethtool support") Signed-off-by: Corinna Vinschen <vinschen@redhat.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> | 26 January 2021, 21:39:26 UTC |
| 2ab38c1 | Ævar Arnfjörð Bjarmason | 26 January 2021, 00:04:38 UTC | mailmap: remove the "repo-abbrev" comment Remove the magical "repo-abbrev" comment added when this file was introduced in e0ab1ec9fcd3 ([PATCH] add .mailmap for proper git-shortlog output, 2007-02-14). It's been an undocumented feature of git-shortlog(1), originally added to git for Linus's use. Since then he's no longer using it[1], and I've removed the feature in git.git's 4e168333a87 (shortlog: remove unused(?) "repo-abbrev" feature, 2021-01-12). It's on the "master" branch, but not yet in a release version. Let's also remove it from linux.git, both as a heads-up to any potential users of it in linux.git whose use would be broken sooner than later by git itself, and because it'll eventually be entirely redundant. 1. https://lore.kernel.org/git/CAHk-=wixHyBKZVUcxq+NCWMbkrX0xnppb7UCopRWw1+oExYpYw@mail.gmail.com/ Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 26 January 2021, 19:40:17 UTC |
| 00e35f2 | Helge Deller | 26 January 2021, 19:16:21 UTC | parisc: Enable -mlong-calls gcc option by default when !CONFIG_MODULES When building a kernel without module support, the CONFIG_MLONGCALL option needs to be enabled in order to reach symbols which are outside of a 22-bit branch. This patch changes the autodetection in the Kconfig script to always enable CONFIG_MLONGCALL when modules are disabled and uses a far call to preempt_schedule_irq() in intr_do_preempt() to reach the symbol in all cases. Signed-off-by: Helge Deller <deller@gmx.de> Reported-by: kernel test robot <lkp@intel.com> Cc: stable@vger.kernel.org # v5.6+ | 26 January 2021, 19:16:21 UTC |
| 4992eb4 | Linus Torvalds | 26 January 2021, 19:10:14 UTC | Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm Pull kvm fixes from Paolo Bonzini: - x86 bugfixes - Documentation fixes - Avoid performance regression due to SEV-ES patches - ARM: - Don't allow tagged pointers to point to memslots - Filter out ARMv8.1+ PMU events on v8.0 hardware - Hide PMU registers from userspace when no PMU is configured - More PMU cleanups - Don't try to handle broken PSCI firmware - More sys_reg() to reg_to_encoding() conversions * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: x86: allow KVM_REQ_GET_NESTED_STATE_PAGES outside guest mode for VMX KVM: x86: Revert "KVM: x86: Mark GPRs dirty when written" KVM: SVM: Unconditionally sync GPRs to GHCB on VMRUN of SEV-ES guest KVM: nVMX: Sync unsync'd vmcs02 state to vmcs12 on migration kvm: tracing: Fix unmatched kvm_entry and kvm_exit events KVM: Documentation: Update description of KVM_{GET,CLEAR}_DIRTY_LOG KVM: x86: get smi pending status correctly KVM: x86/pmu: Fix HW_REF_CPU_CYCLES event pseudo-encoding in intel_arch_events[] KVM: x86/pmu: Fix UBSAN shift-out-of-bounds warning in intel_pmu_refresh() KVM: x86: Add more protection against undefined behavior in rsvd_bits() KVM: Documentation: Fix spec for KVM_CAP_ENABLE_CAP_VM KVM: Forbid the use of tagged userspace addresses for memslots KVM: arm64: Filter out v8.1+ events on v8.0 HW KVM: arm64: Compute TPIDR_EL2 ignoring MTE tag KVM: arm64: Use the reg_to_encoding() macro instead of sys_reg() KVM: arm64: Allow PSCI SYSTEM_OFF/RESET to return KVM: arm64: Simplify handling of absent PMU system registers KVM: arm64: Hide PMU registers from userspace when not available | 26 January 2021, 19:10:14 UTC |
| c7230a4 | Linus Torvalds | 26 January 2021, 19:03:30 UTC | Merge tag 'spi-fix-v5.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi Pull spi fixes from Mark Brown: "One new device ID here, plus an error handling fix - nothing remarkable in either" * tag 'spi-fix-v5.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: spidev: Add cisco device compatible spi: altera: Fix memory leak on error path | 26 January 2021, 19:03:30 UTC |
| 5bec248 | Linus Torvalds | 26 January 2021, 18:59:01 UTC | Merge tag 'regulator-fix-v5.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator Pull regulator fixes from Mark Brown: "The main thing here is a change to make sure that we don't try to double resolve the supply of a regulator if we have two probes going on simultaneously, plus an incremental fix on top of that to resolve a lockdep issue it introduced. There's also a patch from Dmitry Osipenko adding stubs for some functions to avoid build issues in consumers in some configurations" * tag 'regulator-fix-v5.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: regulator: Fix lockdep warning resolving supplies regulator: consumer: Add missing stubs to regulator/consumer.h regulator: core: avoid regulator_resolve_supply() race condition | 26 January 2021, 18:59:01 UTC |
| 0aa91f8 | Davidlohr Bueso | 15 January 2021, 00:14:48 UTC | parisc: Remove leftover reference to the power_tasklet This was removed long ago, back in: 6e16d9409e1 ([PARISC] Convert soft power switch driver to kthread) Signed-off-by: Davidlohr Bueso <dbueso@suse.de> Signed-off-by: Helge Deller <deller@gmx.de> | 26 January 2021, 18:57:26 UTC |
| 67a3c6b | Stefan Assmann | 30 November 2020, 13:12:57 UTC | i40e: acquire VSI pointer only after VF is initialized This change simplifies the VF initialization check and also minimizes the delay between acquiring the VSI pointer and using it. As known by the commit being fixed, there is a risk of the VSI pointer getting changed. Therefore minimize the delay between getting and using the pointer. Fixes: 9889707b06ac ("i40e: Fix crash caused by stress setting of VF MAC addresses") Signed-off-by: Stefan Assmann <sassmann@kpanic.de> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> | 26 January 2021, 18:44:17 UTC |
| f3fe97f | Brett Creeley | 21 January 2021, 18:38:06 UTC | ice: Fix MSI-X vector fallback logic The current MSI-X enablement logic tries to enable best-case MSI-X vectors and if that fails we only support a bare-minimum set. This includes a single MSI-X for 1 Tx and 1 Rx queue and a single MSI-X for the OICR interrupt. Unfortunately, the driver fails to load when we don't get as many MSI-X as requested for a couple reasons. First, the code to allocate MSI-X in the driver tries to allocate num_online_cpus() MSI-X for LAN traffic without caring about the number of MSI-X actually enabled/requested from the kernel for LAN traffic. So, when calling ice_get_res() for the PF VSI, it returns failure because the number of available vectors is less than requested. Fix this by not allowing the PF VSI to allocation more than pf->num_lan_msix MSI-X vectors and pf->num_lan_msix Rx/Tx queues. Limiting the number of queues is done because we don't want more than 1 Tx/Rx queue per interrupt due to performance conerns. Second, the driver assigns pf->num_lan_msix = 2, to account for LAN traffic and the OICR. However, pf->num_lan_msix is only meant for LAN MSI-X. This is causing a failure when the PF VSI tries to allocate/reserve the minimum pf->num_lan_msix because the OICR MSI-X has already been reserved, so there may not be enough MSI-X vectors left. Fix this by setting pf->num_lan_msix = 1 for the failure case. Then the ICE_MIN_MSIX accounts for the LAN MSI-X and the OICR MSI-X needed for the failure case. Update the related defines used in ice_ena_msix_range() to align with the above behavior and remove the unused RDMA defines because RDMA is currently not supported. Also, remove the now incorrect comment. Fixes: 152b978a1f90 ("ice: Rework ice_ena_msix_range") Signed-off-by: Brett Creeley <brett.creeley@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> | 26 January 2021, 18:44:17 UTC |
| 943b881 | Brett Creeley | 21 January 2021, 18:38:05 UTC | ice: Don't allow more channels than LAN MSI-X available Currently users could create more channels than LAN MSI-X available. This is happening because there is no check against pf->num_lan_msix when checking the max allowed channels and will cause performance issues if multiple Tx and Rx queues are tied to a single MSI-X. Fix this by not allowing more channels than LAN MSI-X available in pf->num_lan_msix. Fixes: 87324e747fde ("ice: Implement ethtool ops for channels") Signed-off-by: Brett Creeley <brett.creeley@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> | 26 January 2021, 18:44:17 UTC |
| 13ed5e8 | Nick Nunley | 21 November 2020, 00:38:33 UTC | ice: update dev_addr in ice_set_mac_address even if HW filter exists Fix the driver to copy the MAC address configured in ndo_set_mac_address into dev_addr, even if the MAC filter already exists in HW. In some situations (e.g. bonding) the netdev's dev_addr could have been modified outside of the driver, with no change to the HW filter, so the driver cannot assume that they match. Fixes: 757976ab16be ("ice: Fix check for removing/adding mac filters") Signed-off-by: Nick Nunley <nicholas.d.nunley@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> | 26 January 2021, 18:43:49 UTC |
| 1b0b0b5 | Nick Nunley | 21 November 2020, 00:38:31 UTC | ice: Implement flow for IPv6 next header (extension header) This patch is based on a similar change to i40e by Slawomir Laba: "i40e: Implement flow for IPv6 next header (extension header)". When a packet contains an IPv6 header with next header which is an extension header and not a protocol one, the kernel function skb_transport_header called with such sk_buff will return a pointer to the extension header and not to the TCP one. The above explained call caused a problem with packet processing for skb with encapsulation for tunnel with ICE_TX_CTX_EIPT_IPV6. The extension header was not skipped at all. The ipv6_skip_exthdr function does check if next header of the IPV6 header is an extension header and doesn't modify the l4_proto pointer if it points to a protocol header value so its safe to omit the comparison of exthdr and l4.hdr pointers. The ipv6_skip_exthdr can return value -1. This means that the skipping process failed and there is something wrong with the packet so it will be dropped. Fixes: a4e82a81f573 ("ice: Add support for tunnel offloads") Signed-off-by: Nick Nunley <nicholas.d.nunley@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> | 26 January 2021, 18:43:49 UTC |
| 29e2d9e | Henry Tieman | 21 November 2020, 00:38:30 UTC | ice: fix FDir IPv6 flexbyte The packet classifier would occasionally misrecognize an IPv6 training packet when the next protocol field was 0. The correct value for unspecified protocol is IPPROTO_NONE. Fixes: 165d80d6adab ("ice: Support IPv6 Flow Director filters") Signed-off-by: Henry Tieman <henry.w.tieman@intel.com> Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> | 26 January 2021, 18:43:49 UTC |
| 377bf66 | Linus Torvalds | 26 January 2021, 18:39:46 UTC | Revert "mm: fix initialization of struct page for holes in memory layout" This reverts commit d3921cb8be29ce5668c64e23ffdaeec5f8c69399. Chris Wilson reports that it causes boot problems: "We have half a dozen or so different machines in CI that are silently failing to boot, that we believe is bisected to this patch" and the CI team confirmed that a revert fixed the issues. The cause is unknown for now, so let's revert it. Link: https://lore.kernel.org/lkml/161160687463.28991.354987542182281928@build.alporthouse.com/ Reported-and-tested-by: Chris Wilson <chris@chris-wilson.co.uk> Acked-by: Mike Rapoport <rppt@linux.ibm.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 26 January 2021, 18:39:46 UTC |
| e081863 | Ricardo Ribalda | 14 January 2021, 13:03:16 UTC | media: hantro: Fix reset_raw_fmt initialization raw_fmt->height in never initialized. But width in initialized twice. Fixes: 88d06362d1d05 ("media: hantro: Refactor for V4L2 API spec compliancy") Signed-off-by: Ricardo Ribalda <ribalda@chromium.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Cc: <stable@vger.kernel.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> | 26 January 2021, 18:16:27 UTC |
| eaf18a4 | Yannick Fertre | 15 January 2021, 14:31:44 UTC | media: cec: add stm32 driver Missing stm32 directory to Makefile. Signed-off-by: Yannick Fertre <yannick.fertre@foss.st.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Fixes: 4be5e8648b0c ("media: move CEC platform drivers to a separate directory") Cc: <stable@vger.kernel.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> | 26 January 2021, 18:15:54 UTC |
| 73bc0b0 | Jernej Skrabec | 23 December 2020, 11:06:59 UTC | media: cedrus: Fix H264 decoding During H264 API overhaul subtle bug was introduced Cedrus driver. Progressive references have both, top and bottom reference flags set. Cedrus reference list expects only bottom reference flag and only when interlaced frames are decoded. However, due to a bug in Cedrus check, exclusivity is not tested and that flag is set also for progressive references. That causes "jumpy" background with many videos. Fix that by checking that only bottom reference flag is set in control and nothing else. Tested-by: Andre Heider <a.heider@gmail.com> Fixes: cfc8c3ed533e ("media: cedrus: h264: Properly configure reference field") Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Cc: <stable@vger.kernel.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> | 26 January 2021, 18:15:32 UTC |
| a53e3c1 | Hans Verkuil | 18 January 2021, 15:37:00 UTC | media: v4l2-subdev.h: BIT() is not available in userspace The BIT macro is not available in userspace, so replace BIT(0) by 0x00000001. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Fixes: 6446ec6cbf46 ("media: v4l2-subdev: add VIDIOC_SUBDEV_QUERYCAP ioctl") Cc: <stable@vger.kernel.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> | 26 January 2021, 18:14:33 UTC |
| 4961167 | Takashi Iwai | 26 January 2021, 16:56:03 UTC | ALSA: hda/via: Apply the workaround generically for Clevo machines We've got another report indicating a similar problem wrt the power-saving behavior with VIA codec on Clevo machines. Let's apply the existing workaround generically to all Clevo devices with VIA codecs to cover all in once. BugLink: https://bugzilla.opensuse.org/show_bug.cgi?id=1181330 Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20210126165603.11683-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de> | 26 January 2021, 17:05:03 UTC |
| ca70f00 | Pavel Begunkov | 26 January 2021, 15:28:27 UTC | io_uring: fix cancellation taking mutex while TASK_UNINTERRUPTIBLE do not call blocking ops when !TASK_RUNNING; state=2 set at [<00000000ced9dbfc>] prepare_to_wait+0x1f4/0x3b0 kernel/sched/wait.c:262 WARNING: CPU: 1 PID: 19888 at kernel/sched/core.c:7853 __might_sleep+0xed/0x100 kernel/sched/core.c:7848 RIP: 0010:__might_sleep+0xed/0x100 kernel/sched/core.c:7848 Call Trace: __mutex_lock_common+0xc4/0x2ef0 kernel/locking/mutex.c:935 __mutex_lock kernel/locking/mutex.c:1103 [inline] mutex_lock_nested+0x1a/0x20 kernel/locking/mutex.c:1118 io_wq_submit_work+0x39a/0x720 fs/io_uring.c:6411 io_run_cancel fs/io-wq.c:856 [inline] io_wqe_cancel_pending_work fs/io-wq.c:990 [inline] io_wq_cancel_cb+0x614/0xcb0 fs/io-wq.c:1027 io_uring_cancel_files fs/io_uring.c:8874 [inline] io_uring_cancel_task_requests fs/io_uring.c:8952 [inline] __io_uring_files_cancel+0x115d/0x19e0 fs/io_uring.c:9038 io_uring_files_cancel include/linux/io_uring.h:51 [inline] do_exit+0x2e6/0x2490 kernel/exit.c:780 do_group_exit+0x168/0x2d0 kernel/exit.c:922 get_signal+0x16b5/0x2030 kernel/signal.c:2770 arch_do_signal_or_restart+0x8e/0x6a0 arch/x86/kernel/signal.c:811 handle_signal_work kernel/entry/common.c:147 [inline] exit_to_user_mode_loop kernel/entry/common.c:171 [inline] exit_to_user_mode_prepare+0xac/0x1e0 kernel/entry/common.c:201 __syscall_exit_to_user_mode_work kernel/entry/common.c:291 [inline] syscall_exit_to_user_mode+0x48/0x190 kernel/entry/common.c:302 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Rewrite io_uring_cancel_files() to mimic __io_uring_task_cancel()'s counting scheme, so it does all the heavy work before setting TASK_UNINTERRUPTIBLE. Cc: stable@vger.kernel.org # 5.9+ Reported-by: syzbot+f655445043a26a7cfab8@syzkaller.appspotmail.com Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> [axboe: fix inverted task check] Signed-off-by: Jens Axboe <axboe@kernel.dk> | 26 January 2021, 16:01:49 UTC |
| a1bb3cd | Pavel Begunkov | 26 January 2021, 15:28:26 UTC | io_uring: fix __io_uring_files_cancel() with TASK_UNINTERRUPTIBLE If the tctx inflight number haven't changed because of cancellation, __io_uring_task_cancel() will continue leaving the task in TASK_UNINTERRUPTIBLE state, that's not expected by __io_uring_files_cancel(). Ensure we always call finish_wait() before retrying. Cc: stable@vger.kernel.org # 5.9+ Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> | 26 January 2021, 15:51:08 UTC |
| 34b1a1c | Thomas Gleixner | 18 January 2021, 18:01:21 UTC | futex: Handle faults correctly for PI futexes fixup_pi_state_owner() tries to ensure that the state of the rtmutex, pi_state and the user space value related to the PI futex are consistent before returning to user space. In case that the user space value update faults and the fault cannot be resolved by faulting the page in via fault_in_user_writeable() the function returns with -EFAULT and leaves the rtmutex and pi_state owner state inconsistent. A subsequent futex_unlock_pi() operates on the inconsistent pi_state and releases the rtmutex despite not owning it which can corrupt the RB tree of the rtmutex and cause a subsequent kernel stack use after free. It was suggested to loop forever in fixup_pi_state_owner() if the fault cannot be resolved, but that results in runaway tasks which is especially undesired when the problem happens due to a programming error and not due to malice. As the user space value cannot be fixed up, the proper solution is to make the rtmutex and the pi_state consistent so both have the same owner. This leaves the user space value out of sync. Any subsequent operation on the futex will fail because the 10th rule of PI futexes (pi_state owner and user space value are consistent) has been violated. As a consequence this removes the inept attempts of 'fixing' the situation in case that the current task owns the rtmutex when returning with an unresolvable fault by unlocking the rtmutex which left pi_state::owner and rtmutex::owner out of sync in a different and only slightly less dangerous way. Fixes: 1b7558e457ed ("futexes: fix fault handling in futex_lock_pi") Reported-by: gzobqq@gmail.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: stable@vger.kernel.org | 26 January 2021, 14:11:00 UTC |
| f2dac39 | Thomas Gleixner | 19 January 2021, 15:26:38 UTC | futex: Simplify fixup_pi_state_owner() Too many gotos already and an upcoming fix would make it even more unreadable. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: stable@vger.kernel.org | 26 January 2021, 14:10:59 UTC |
| 6ccc84f | Thomas Gleixner | 20 January 2021, 10:35:19 UTC | futex: Use pi_state_update_owner() in put_pi_state() No point in open coding it. This way it gains the extra sanity checks. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: stable@vger.kernel.org | 26 January 2021, 14:10:59 UTC |
