| c102cb0 | Ingo Molnar | 06 May 2015, 06:29:37 UTC | Merge tag 'efi-urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/mfleming/efi into x86/urgent Pull EFI fixes from Matt Fleming: * Avoid garbage names in efivarfs due to buggy firmware by zeroing EFI variable name. (Ross Lagerwall) * Stop erroneously dropping upper 32 bits of boot command line pointer in EFI boot stub and stash them in ext_cmd_line_ptr. (Roy Franz) * Fix double-free bug in error handling code path of EFI runtime map code. (Dan Carpenter) Signed-off-by: Ingo Molnar <mingo@kernel.org> | 06 May 2015, 06:30:24 UTC |
| de71ad2 | Marc Dionne | 04 May 2015, 18:16:44 UTC | x86: Make cpu_tss available to external modules Commit 75182b1632 ("x86/asm/entry: Switch all C consumers of kernel_stack to this_cpu_sp0()") changed current_thread_info to use this_cpu_sp0, and indirectly made it rely on init_tss which was exported with EXPORT_PER_CPU_SYMBOL_GPL. As a result some macros and inline functions such as set/get_fs, test_thread_flag and variants have been made unusable for external modules. Make cpu_tss exported with EXPORT_PER_CPU_SYMBOL so that these functions are accessible again, as they were previously. Signed-off-by: Marc Dionne <marc.dionne@your-file-system.com> Acked-by: Andy Lutomirski <luto@amacapital.net> Link: http://lkml.kernel.org/r/1430763404-21221-1-git-send-email-marc.dionne@your-file-system.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de> | 05 May 2015, 18:40:31 UTC |
| d67e199 | Dan Carpenter | 21 April 2015, 13:46:28 UTC | efi: Fix error handling in add_sysfs_runtime_map_entry() I spotted two (difficult to hit) bugs while reviewing this. 1) There is a double free bug because we unregister "map_kset" in add_sysfs_runtime_map_entry() and also efi_runtime_map_init(). 2) If we fail to allocate "entry" then we should return ERR_PTR(-ENOMEM) instead of NULL. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Cc: Dave Young <dyoung@redhat.com> Cc: Guangyu Sun <guangyu.sun@oracle.com> Cc: <stable@vger.kernel.org> Signed-off-by: Matt Fleming <matt.fleming@intel.com> | 05 May 2015, 15:20:13 UTC |
| e8a4a26 | Tahsin Erdogan | 05 May 2015, 04:15:31 UTC | x86/spinlocks: Fix regression in spinlock contention detection A spinlock is regarded as contended when there is at least one waiter. Currently, the code that checks whether there are any waiters rely on tail value being greater than head. However, this is not true if tail reaches the max value and wraps back to zero, so arch_spin_is_contended() incorrectly returns 0 (not contended) when tail is smaller than head. The original code (before regression) handled this case by casting the (tail - head) to an unsigned value. This change simply restores that behavior. Fixes: d6abfdb20223 ("x86/spinlocks/paravirt: Fix memory corruption on unlock") Signed-off-by: Tahsin Erdogan <tahsin@google.com> Cc: peterz@infradead.org Cc: Waiman.Long@hp.com Cc: borntraeger@de.ibm.com Cc: oleg@redhat.com Cc: raghavendra.kt@linux.vnet.ibm.com Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/1430799331-20445-1-git-send-email-tahsin@google.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de> | 05 May 2015, 09:01:38 UTC |
| 94d4b47 | Ingo Molnar | 23 November 2012, 18:19:07 UTC | x86/mm: Clean up types in xlate_dev_mem_ptr() Pavel Machek reported the following compiler warning on x86/32 CONFIG_HIGHMEM64G=y builds: arch/x86/mm/ioremap.c:344:10: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] Clean up the types in this function by using a single natural type for internal calculations (unsigned long), to make it more apparent what's happening, and also to remove fragile casts. Reported-by: Pavel Machek <pavel@ucw.cz> Cc: jgross@suse.com Cc: roland@purestorage.com Link: http://lkml.kernel.org/r/20150416080440.GA507@amd Signed-off-by: Ingo Molnar <mingo@kernel.org> | 20 April 2015, 06:41:37 UTC |
| a6dfa12 | Konrad Rzeszutek Wilk | 17 April 2015, 19:04:48 UTC | config: Enable NEED_DMA_MAP_STATE by default when SWIOTLB is selected A huge amount of NIC drivers use the DMA API, however if compiled under 32-bit an very important part of the DMA API can be ommitted leading to the drivers not working at all (especially if used with 'swiotlb=force iommu=soft'). As Prashant Sreedharan explains it: "the driver [tg3] uses DEFINE_DMA_UNMAP_ADDR(), dma_unmap_addr_set() to keep a copy of the dma "mapping" and dma_unmap_addr() to get the "mapping" value. On most of the platforms this is a no-op, but ... with "iommu=soft and swiotlb=force" this house keeping is required, ... otherwise we pass 0 while calling pci_unmap_/pci_dma_sync_ instead of the DMA address." As such enable this even when using 32-bit kernels. Reported-by: Ian Jackson <Ian.Jackson@eu.citrix.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Acked-by: David S. Miller <davem@davemloft.net> Acked-by: Prashant Sreedharan <prashant@broadcom.com> Cc: Borislav Petkov <bp@alien8.de> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Michael Chan <mchan@broadcom.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: boris.ostrovsky@oracle.com Cc: cascardo@linux.vnet.ibm.com Cc: david.vrabel@citrix.com Cc: sanjeevb@broadcom.com Cc: siva.kallam@broadcom.com Cc: vyasevich@gmail.com Cc: xen-devel@lists.xensource.com Link: http://lkml.kernel.org/r/20150417190448.GA9462@l.oracle.com Signed-off-by: Ingo Molnar <mingo@kernel.org> | 18 April 2015, 12:36:49 UTC |
| 98b228f | Roy Franz | 15 April 2015, 23:32:24 UTC | x86/efi: Store upper bits of command line buffer address in ext_cmd_line_ptr Until now, the EFI stub was only setting the 32 bit cmd_line_ptr in the setup_header structure, so on 64 bit platforms this could be truncated. This patch adds setting the upper bits of the buffer address in ext_cmd_line_ptr. This case was likely never hit, as the allocation for this buffer is done at the lowest available address. Only x86_64 kernels have this problem, as the 1-1 mapping mandated by EFI ensures that all memory is 32 bit addressable on 32 bit platforms. The EFI stub does not support mixed mode, so the 32 bit kernel on 64 bit firmware case does not need to be handled. Signed-off-by: Roy Franz <roy.franz@linaro.org> Cc: <stable@vger.kernel.org> Signed-off-by: Matt Fleming <matt.fleming@intel.com> | 17 April 2015, 14:46:32 UTC |
| c57dcb5 | Ross Lagerwall | 02 April 2015, 07:39:00 UTC | efivarfs: Ensure VariableName is NUL-terminated Some buggy firmware implementations update VariableNameSize on success such that it does not include the final NUL character which results in garbage in the efivarfs name entries. Use kzalloc on the efivar_entry (as is done in efivars.c) to ensure that the name is always NUL-terminated. The buggy firmware is: BIOS Information Vendor: Intel Corp. Version: S1200RP.86B.02.02.0005.102320140911 Release Date: 10/23/2014 BIOS Revision: 4.6 System Information Manufacturer: Intel Corporation Product Name: S1200RP_SE Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com> Acked-by: Matthew Garrett <mjg59@coreos.com> Cc: Jeremy Kerr <jk@ozlabs.org> Cc: <stable@vger.kernel.org> Signed-off-by: Matt Fleming <matt.fleming@intel.com> | 17 April 2015, 14:41:13 UTC |
| 18ecb3b | Borislav Petkov | 16 April 2015, 18:41:37 UTC | x86/fpu: Load xsave pointer *after* initialization So I was playing with gdb today and did this simple thing: gdb /bin/ls ... (gdb) run Box exploded with this splat: BUG: unable to handle kernel NULL pointer dereference at 00000000000001d0 IP: [<ffffffff8100fe5a>] xstateregs_get+0x7a/0x120 [...] Call Trace: ptrace_regset ptrace_request ? wait_task_inactive ? preempt_count_sub arch_ptrace ? ptrace_get_task_struct SyS_ptrace system_call_fastpath ... because we do cache &target->thread.fpu.state->xsave into the local variable xsave but that pointer is NULL at that time and it gets initialized later, in init_fpu(), see: e7f180dcd8ab ("x86/fpu: Change xstateregs_get()/set() to use ->xsave.i387 rather than ->fxsave") The fix is simple: load xsave *after* init_fpu() has run. Also do the same in xstateregs_set(), as suggested by Oleg Nesterov. Signed-off-by: Borislav Petkov <bp@suse.de> Acked-by: Oleg Nesterov <oleg@redhat.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Rik van Riel <riel@redhat.com> Cc: Tavis Ormandy <taviso@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1429209697-5902-1-git-send-email-bp@alien8.de Signed-off-by: Ingo Molnar <mingo@kernel.org> | 17 April 2015, 08:15:47 UTC |
| fd0f86b | Oleg Nesterov | 16 April 2015, 07:40:25 UTC | x86/ptrace: Fix the TIF_FORCED_TF logic in handle_signal() When the TIF_SINGLESTEP tracee dequeues a signal, handle_signal() clears TIF_FORCED_TF and X86_EFLAGS_TF but leaves TIF_SINGLESTEP set. If the tracer does PTRACE_SINGLESTEP again, enable_single_step() sets X86_EFLAGS_TF but not TIF_FORCED_TF. This means that the subsequent PTRACE_CONT doesn't not clear X86_EFLAGS_TF, and the tracee gets the wrong SIGTRAP. Test-case (needs -O2 to avoid prologue insns in signal handler): #include <unistd.h> #include <stdio.h> #include <sys/ptrace.h> #include <sys/wait.h> #include <sys/user.h> #include <assert.h> #include <stddef.h> void handler(int n) { asm("nop"); } int child(void) { assert(ptrace(PTRACE_TRACEME, 0,0,0) == 0); signal(SIGALRM, handler); kill(getpid(), SIGALRM); return 0x23; } void *getip(int pid) { return (void*)ptrace(PTRACE_PEEKUSER, pid, offsetof(struct user, regs.rip), 0); } int main(void) { int pid, status; pid = fork(); if (!pid) return child(); assert(wait(&status) == pid); assert(WIFSTOPPED(status) && WSTOPSIG(status) == SIGALRM); assert(ptrace(PTRACE_SINGLESTEP, pid, 0, SIGALRM) == 0); assert(wait(&status) == pid); assert(WIFSTOPPED(status) && WSTOPSIG(status) == SIGTRAP); assert((getip(pid) - (void*)handler) == 0); assert(ptrace(PTRACE_SINGLESTEP, pid, 0, SIGALRM) == 0); assert(wait(&status) == pid); assert(WIFSTOPPED(status) && WSTOPSIG(status) == SIGTRAP); assert((getip(pid) - (void*)handler) == 1); assert(ptrace(PTRACE_CONT, pid, 0,0) == 0); assert(wait(&status) == pid); assert(WIFEXITED(status) && WEXITSTATUS(status) == 0x23); return 0; } The last assert() fails because PTRACE_CONT wrongly triggers another single-step and X86_EFLAGS_TF can't be cleared by debugger until the tracee does sys_rt_sigreturn(). Change handle_signal() to do user_disable_single_step() if stepping, we do not need to preserve TIF_SINGLESTEP because we are going to do ptrace_notify(), and it is simply wrong to leak this bit. While at it, change the comment to explain why we also need to clear TF unconditionally after setup_rt_frame(). Note: in the longer term we should probably change setup_sigcontext() to use get_flags() and then just remove this user_disable_single_step(). And, the state of TIF_FORCED_TF can be wrong after restore_sigcontext() which can set/clear TF, this needs another fix. This fix fixes the 'single_step_syscall_32' testcase in the x86 testsuite: Before: ~/linux/tools/testing/selftests/x86> ./single_step_syscall_32 [RUN] Set TF and check nop [OK] Survived with TF set and 9 traps [RUN] Set TF and check int80 [OK] Survived with TF set and 9 traps [RUN] Set TF and check a fast syscall [WARN] Hit 10000 SIGTRAPs with si_addr 0xf7789cc0, ip 0xf7789cc0 Trace/breakpoint trap (core dumped) After: ~/linux/linux/tools/testing/selftests/x86> ./single_step_syscall_32 [RUN] Set TF and check nop [OK] Survived with TF set and 9 traps [RUN] Set TF and check int80 [OK] Survived with TF set and 9 traps [RUN] Set TF and check a fast syscall [OK] Survived with TF set and 39 traps [RUN] Fast syscall with TF cleared [OK] Nothing unexpected happened Reported-by: Evan Teran <eteran@alum.rit.edu> Reported-by: Pedro Alves <palves@redhat.com> Tested-by: Andres Freund <andres@anarazel.de> Signed-off-by: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Thomas Gleixner <tglx@linutronix.de> [ Added x86 self-test info. ] Signed-off-by: Ingo Molnar <mingo@kernel.org> | 16 April 2015, 10:47:45 UTC |
| 0a15584 | Andy Lutomirski | 15 April 2015, 23:10:07 UTC | x86, selftests: Add single_step_syscall test This is a very simple test that makes system calls with TF set. This test currently fails when running the 32-bit build on a 64-bit kernel on an Intel CPU. This bug will be fixed by the next commit. Signed-off-by: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Shuah Khan <shuah.kh@samsung.com> Link: http://lkml.kernel.org/r/20e68021155f6ab5c60590dcad81d37c68ea2c4f.1429139075.git.luto@kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org> | 16 April 2015, 10:41:49 UTC |
| 6a16dda | Linus Torvalds | 13 April 2015, 20:36:45 UTC | Merge branch 'x86-vdso-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 vdso changes from Ingo Molnar: "Misc vDSO updates" * 'x86-vdso-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/vdso: Remove x32 intermediates during 'make clean' x86/vdso: Teach 'make clean' to remove generated vdso-image-*.c files x86/vdso32/syscall.S: Do not load __USER32_DS to %ss x86/vdso: Fix the x86 vdso2c tool includes | 13 April 2015, 20:36:45 UTC |
| ec1bc8e | Linus Torvalds | 13 April 2015, 20:34:46 UTC | Merge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fix from Ingo Molnar: "Leftover from 4.0 Fix a local stack variable corruption with certain kdump usage patterns (Dave Young)" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/mm/numa: Fix kernel stack corruption in numa_init()->numa_clear_kernel_node_hotplug() | 13 April 2015, 20:34:46 UTC |
| 07f2d8c | Linus Torvalds | 13 April 2015, 20:33:20 UTC | Merge branch 'x86-ras-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 RAS changes from Ingo Molnar: "The main changes in this cycle were: - Simplify the CMCI storm logic on Intel CPUs after yet another report about a race in the code (Borislav Petkov) - Enable the MCE threshold irq on AMD CPUs by default (Aravind Gopalakrishnan) - Add AMD-specific MCE-severity grading function. Further error recovery actions will be based on its output (Aravind Gopalakrishnan) - Documentation updates (Borislav Petkov) - ... assorted fixes and cleanups" * 'x86-ras-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/mce/severity: Fix warning about indented braces x86/mce: Define mce_severity function pointer x86/mce: Add an AMD severities-grading function x86/mce: Reindent __mcheck_cpu_apply_quirks() properly x86/mce: Use safe MSR accesses for AMD quirk x86/MCE/AMD: Enable thresholding interrupts by default if supported x86/MCE: Make mce_panic() fatal machine check msg in the same pattern x86/MCE/intel: Cleanup CMCI storm logic Documentation/acpi/einj: Correct and streamline text x86/MCE/AMD: Drop bogus const modifier from AMD's bank4_names() | 13 April 2015, 20:33:20 UTC |
| ee799f4 | Linus Torvalds | 13 April 2015, 20:32:35 UTC | Merge branch 'x86-platform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 platform change from Ingo Molnar: "An Intel Quark SoC fix" * 'x86-platform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/intel/quark: Run IMR self-test on IMR capble hw only | 13 April 2015, 20:32:35 UTC |
| 6cf78d4 | Linus Torvalds | 13 April 2015, 20:31:32 UTC | Merge branch 'x86-mm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 mm changes from Ingo Molnar: "The main changes in this cycle were: - reduce the x86/32 PAE per task PGD allocation overhead from 4K to 0.032k (Fenghua Yu) - early_ioremap/memunmap() usage cleanups (Juergen Gross) - gbpages support cleanups (Luis R Rodriguez) - improve AMD Bulldozer (family 0x15) ASLR I$ aliasing workaround to increase randomization by 3 bits (per bootup) (Hector Marco-Gisbert) - misc fixlets" * 'x86-mm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/mm: Improve AMD Bulldozer ASLR workaround x86/mm/pat: Initialize __cachemode2pte_tbl[] and __pte2cachemode_tbl[] in a bit more readable fashion init.h: Clean up the __setup()/early_param() macros x86/mm: Simplify probe_page_size_mask() x86/mm: Further simplify 1 GB kernel linear mappings handling x86/mm: Use early_param_on_off() for direct_gbpages init.h: Add early_param_on_off() x86/mm: Simplify enabling direct_gbpages x86/mm: Use IS_ENABLED() for direct_gbpages x86/mm: Unexport set_memory_ro() and set_memory_rw() x86/mm, efi: Use early_ioremap() in arch/x86/platform/efi/efi-bgrt.c x86/mm: Use early_memunmap() instead of early_iounmap() x86/mm/pat: Ensure different messages in STRICT_DEVMEM and PAT cases x86/mm: Reduce PAE-mode per task pgd allocation overhead from 4K to 32 bytes | 13 April 2015, 20:31:32 UTC |
| 0ad5c6b | Linus Torvalds | 13 April 2015, 20:25:33 UTC | Merge branch 'x86-microcode-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 microcode changes from Ingo Molnar: "Microcode driver updates: mostly cleanups but also some fixes (Borislav Petkov)" * 'x86-microcode-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/microcode/amd: Drop the pci_ids.h dependency x86/microcode/intel: Fix printing of microcode blobs in show_saved_mc() x86/microcode/intel: Check scan_microcode()'s retval x86/microcode/intel: Sanitize microcode_pointer() x86/microcode/intel: Move mc arg last in get_matching_{microcode|sig} x86/microcode/intel: Simplify generic_load_microcode_early() x86/microcode: Consolidate family,model, ... code x86/microcode/intel: Rename update_match_revision() x86/microcode/intel: Sanitize _save_mc() x86/microcode/intel: Make _save_mc() return the updated saved count x86/microcode/intel: Simplify load_ucode_intel_bsp() x86/microcode/intel: Get rid of last arg to load_ucode_intel_bsp() x86/microcode/intel: Do the mc_saved_src NULL check first x86/microcode/intel: Check if microcode was found before applying x86/microcode/intel: Fix out of bounds memory access to the extended header | 13 April 2015, 20:25:33 UTC |
| 421ec90 | Linus Torvalds | 13 April 2015, 20:24:23 UTC | Merge branch 'x86-fpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fpu changes from Ingo Molnar: "Various x86 FPU handling cleanups, refactorings and fixes (Borislav Petkov, Oleg Nesterov, Rik van Riel)" * 'x86-fpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (21 commits) x86/fpu: Kill eager_fpu_init_bp() x86/fpu: Don't allocate fpu->state for swapper/0 x86/fpu: Rename drop_init_fpu() to fpu_reset_state() x86/fpu: Fold __drop_fpu() into its sole user x86/fpu: Don't abuse drop_init_fpu() in flush_thread() x86/fpu: Use restore_init_xstate() instead of math_state_restore() on kthread exec x86/fpu: Introduce restore_init_xstate() x86/fpu: Document user_fpu_begin() x86/fpu: Factor out memset(xstate, 0) in fpu_finit() paths x86/fpu: Change xstateregs_get()/set() to use ->xsave.i387 rather than ->fxsave x86/fpu: Don't abuse FPU in kernel threads if use_eager_fpu() x86/fpu: Always allow FPU in interrupt if use_eager_fpu() x86/fpu: __kernel_fpu_begin() should clear fpu_owner_task even if use_eager_fpu() x86/fpu: Also check fpu_lazy_restore() when use_eager_fpu() x86/fpu: Use task_disable_lazy_fpu_restore() helper x86/fpu: Use an explicit if/else in switch_fpu_prepare() x86/fpu: Introduce task_disable_lazy_fpu_restore() helper x86/fpu: Move lazy restore functions up a few lines x86/fpu: Change math_error() to use unlazy_fpu(), kill (now) unused save_init_fpu() x86/fpu: Don't do __thread_fpu_end() if use_eager_fpu() ... | 13 April 2015, 20:24:23 UTC |
| 64f004a | Linus Torvalds | 13 April 2015, 20:23:34 UTC | Merge branch 'x86-debug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 debug changes from Ingo Molnar: "Stack printing fixlets" * 'x86-debug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/kernel: Use kstack_end() in dumpstack_64.c x86/kernel: Fix output of show_stack_log_lvl() | 13 April 2015, 20:23:34 UTC |
| b48488d | Linus Torvalds | 13 April 2015, 20:21:51 UTC | Merge branch 'x86-cpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 cacheinfo sysfs changes from Ingo Molnar: "This tree converts the x86 cacheinfo sysfs code to use the generic code in drivers/base/cacheinfo.c. It's not intended to change the sysfs ABI: 'This patch neither alters any existing sysfs entries nor their formating, however since the generic cacheinfo has switched to use the device attributes instead of the traditional raw kobjects, a directory named 'power' along with its standard attributes are added similar to any other device'" * 'x86-cpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/cpu/cacheinfo: Fix cache_get_priv_group() for Intel processors x86/cacheinfo: Move cacheinfo sysfs code to generic infrastructure | 13 April 2015, 20:21:51 UTC |
| 9f3252f | Linus Torvalds | 13 April 2015, 20:20:54 UTC | Merge branch 'x86-cleanups-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 cleanups from Ingo Molnar: "Various cleanups" * 'x86-cleanups-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/iommu: Fix header comments regarding standard and _FINISH macros x86/earlyprintk: Put CONFIG_PCI-only functions under the #ifdef x86: Fix up obsolete __cpu_set() function usage | 13 April 2015, 20:20:54 UTC |
| 5945fba | Linus Torvalds | 13 April 2015, 20:19:59 UTC | Merge branch 'x86-build-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 build changes from Ingo Molnar: "Small cleanups and fixes" * 'x86-build-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/kexec: Cleanup KEXEC_VERIFY_SIG Kconfig help text x86/build/defconfig: Enable USB_EHCI_TT_NEWSCHED=y x86/build: Fix mkcapflags.sh bash-ism x86/Kconfig: Simplify X86_UP_APIC handling x86/Kconfig: Simplify X86_IO_APIC dependencies x86/Kconfig: Avoid issuing pointless turned off entries to .config | 13 April 2015, 20:19:59 UTC |
| 8f74bc5 | Linus Torvalds | 13 April 2015, 20:19:10 UTC | Merge branch 'x86-boot-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 boot changes from Ingo Molnar: "A number of cleanups" * 'x86-boot-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/boot: Standardize strcmp() x86/boot/64: Remove pointless early_printk() message x86/boot/video: Move the 'video_segment' variable to video.c | 13 April 2015, 20:19:10 UTC |
| 60f898e | Linus Torvalds | 13 April 2015, 20:16:36 UTC | Merge branch 'x86-asm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 asm changes from Ingo Molnar: "There were lots of changes in this development cycle: - over 100 separate cleanups, restructuring changes, speedups and fixes in the x86 system call, irq, trap and other entry code, part of a heroic effort to deobfuscate a decade old spaghetti asm code and its C code dependencies (Denys Vlasenko, Andy Lutomirski) - alternatives code fixes and enhancements (Borislav Petkov) - simplifications and cleanups to the compat code (Brian Gerst) - signal handling fixes and new x86 testcases (Andy Lutomirski) - various other fixes and cleanups By their nature many of these changes are risky - we tried to test them well on many different x86 systems (there are no known regressions), and they are split up finely to help bisection - but there's still a fair bit of residual risk left so caveat emptor" * 'x86-asm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (148 commits) perf/x86/64: Report regs_user->ax too in get_regs_user() perf/x86/64: Simplify regs_user->abi setting code in get_regs_user() perf/x86/64: Do report user_regs->cx while we are in syscall, in get_regs_user() perf/x86/64: Do not guess user_regs->cs, ss, sp in get_regs_user() x86/asm/entry/32: Tidy up JNZ instructions after TESTs x86/asm/entry/64: Reduce padding in execve stubs x86/asm/entry/64: Remove GET_THREAD_INFO() in ret_from_fork x86/asm/entry/64: Simplify jumps in ret_from_fork x86/asm/entry/64: Remove a redundant jump x86/asm/entry/64: Optimize [v]fork/clone stubs x86/asm/entry: Zero EXTRA_REGS for stub32_execve() too x86/asm/entry/64: Move stub_x32_execvecloser() to stub_execveat() x86/asm/entry/64: Use common code for rt_sigreturn() epilogue x86/asm/entry/64: Add forgotten CFI annotation x86/asm/entry/irq: Simplify interrupt dispatch table (IDT) layout x86/asm/entry/64: Move opportunistic sysret code to syscall code path x86, selftests: Add sigreturn selftest x86/alternatives: Guard NOPs optimization x86/asm/entry: Clear EXTRA_REGS for all executable formats x86/signal: Remove pax argument from restore_sigcontext ... | 13 April 2015, 20:16:36 UTC |
| 977e1ba | Linus Torvalds | 13 April 2015, 20:15:09 UTC | Merge branch 'x86-apic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 apic changes from Ingo Molnar: "Changes: - SGI UV APIC driver updates - dead code removal" * 'x86-apic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/apic/uv: Update the UV APIC HUB check x86/apic/uv: Update the UV APIC driver check x86/apic/uv: Update the APIC UV OEM check x86/apic: Remove verify_local_APIC() | 13 April 2015, 20:15:09 UTC |
| 7fd5647 | Linus Torvalds | 13 April 2015, 18:08:28 UTC | Merge branch 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer updates from Ingo Molnar: "The main changes in this cycle were: - clockevents state machine cleanups and enhancements (Viresh Kumar) - clockevents broadcast notifier horror to state machine conversion and related cleanups (Thomas Gleixner, Rafael J Wysocki) - clocksource and timekeeping core updates (John Stultz) - clocksource driver updates and fixes (Ben Dooks, Dmitry Osipenko, Hans de Goede, Laurent Pinchart, Maxime Ripard, Xunlei Pang) - y2038 fixes (Xunlei Pang, John Stultz) - NMI-safe ktime_get_raw_fast() and general refactoring of the clock code, in preparation to perf's per event clock ID support (Peter Zijlstra) - generic sched/clock fixes, optimizations and cleanups (Daniel Thompson) - clockevents cpu_down() race fix (Preeti U Murthy)" * 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (94 commits) timers/PM: Drop unnecessary braces from tick_freeze() timers/PM: Fix up tick_unfreeze() timekeeping: Get rid of stale comment clockevents: Cleanup dead cpu explicitely clockevents: Make tick handover explicit clockevents: Remove broadcast oneshot control leftovers sched/idle: Use explicit broadcast oneshot control function ARM: Tegra: Use explicit broadcast oneshot control function ARM: OMAP: Use explicit broadcast oneshot control function intel_idle: Use explicit broadcast oneshot control function ACPI/idle: Use explicit broadcast control function ACPI/PAD: Use explicit broadcast oneshot control function x86/amd/idle, clockevents: Use explicit broadcast oneshot control functions clockevents: Provide explicit broadcast oneshot control functions clockevents: Remove the broadcast control leftovers ARM: OMAP: Use explicit broadcast control function intel_idle: Use explicit broadcast control function cpuidle: Use explicit broadcast control function ACPI/processor: Use explicit broadcast control function ACPI/PAD: Use explicit broadcast control function ... | 13 April 2015, 18:08:28 UTC |
| 49d2953 | Linus Torvalds | 13 April 2015, 17:47:34 UTC | Merge branch 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler changes from Ingo Molnar: "Major changes: - Reworked CPU capacity code, for better SMP load balancing on systems with assymetric CPUs. (Vincent Guittot, Morten Rasmussen) - Reworked RT task SMP balancing to be push based instead of pull based, to reduce latencies on large CPU count systems. (Steven Rostedt) - SCHED_DEADLINE support updates and fixes. (Juri Lelli) - SCHED_DEADLINE task migration support during CPU hotplug. (Wanpeng Li) - x86 mwait-idle optimizations and fixes. (Mike Galbraith, Len Brown) - sched/numa improvements. (Rik van Riel) - various cleanups" * 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (28 commits) sched/core: Drop debugging leftover trace_printk call sched/deadline: Support DL task migration during CPU hotplug sched/core: Check for available DL bandwidth in cpuset_cpu_inactive() sched/deadline: Always enqueue on previous rq when dl_task_timer() fires sched/core: Remove unused argument from init_[rt|dl]_rq() sched/deadline: Fix rt runtime corruption when dl fails its global constraints sched/deadline: Avoid a superfluous check sched: Improve load balancing in the presence of idle CPUs sched: Optimize freq invariant accounting sched: Move CFS tasks to CPUs with higher capacity sched: Add SD_PREFER_SIBLING for SMT level sched: Remove unused struct sched_group_capacity::capacity_orig sched: Replace capacity_factor by usage sched: Calculate CPU's usage statistic and put it into struct sg_lb_stats::group_usage sched: Add struct rq::cpu_capacity_orig sched: Make scale_rt invariant with frequency sched: Make sched entity usage tracking scale-invariant sched: Remove frequency scaling from cpu_capacity sched: Track group sched_entity usage contributions sched: Add sched_avg::utilization_avg_contrib ... | 13 April 2015, 17:47:34 UTC |
| cc76ee7 | Linus Torvalds | 13 April 2015, 17:27:28 UTC | Merge branch 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull core locking changes from Ingo Molnar: "Main changes: - jump label asm preparatory work for PowerPC (Anton Blanchard) - rwsem optimizations and cleanups (Davidlohr Bueso) - mutex optimizations and cleanups (Jason Low) - futex fix (Oleg Nesterov) - remove broken atomicity checks from {READ,WRITE}_ONCE() (Peter Zijlstra)" * 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: powerpc, jump_label: Include linux/jump_label.h to get HAVE_JUMP_LABEL define jump_label: Allow jump labels to be used in assembly jump_label: Allow asm/jump_label.h to be included in assembly locking/mutex: Further simplify mutex_spin_on_owner() locking: Remove atomicy checks from {READ,WRITE}_ONCE locking/rtmutex: Rename argument in the rt_mutex_adjust_prio_chain() documentation as well locking/rwsem: Fix lock optimistic spinning when owner is not running locking: Remove ACCESS_ONCE() usage locking/rwsem: Check for active lock before bailing on spinning locking/rwsem: Avoid deceiving lock spinners locking/rwsem: Set lock ownership ASAP locking/rwsem: Document barrier need when waking tasks locking/futex: Check PF_KTHREAD rather than !p->mm to filter out kthreads locking/mutex: Refactor mutex_spin_on_owner() locking/mutex: In mutex_spin_on_owner(), return true when owner changes | 13 April 2015, 17:27:28 UTC |
| 9c65e12 | Linus Torvalds | 13 April 2015, 17:22:30 UTC | Merge branch 'core-efi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull EFI update from Ingo Molnar: "This tree includes various fixes, cleanups, a new efi=debug boot option and EFI boot stub memory allocation optimizations" * 'core-efi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: efi/libstub: Retrieve FDT size when loaded from UEFI config table efi: Clean up the efi_call_phys_[prolog|epilog]() save/restore interaction efi: Disable interrupts around EFI calls, not in the epilog/prolog calls x86/efi: Add a "debug" option to the efi= cmdline firmware: dmi_scan: Use direct access to static vars firmware: dmi_scan: Use full dmi version for SMBIOS3 | 13 April 2015, 17:22:30 UTC |
| 67dbb3a | Linus Torvalds | 13 April 2015, 17:11:18 UTC | Merge tag 'md/4.0-rc7-fix' of git://neil.brown.name/md Pull md fixes from Neil Brown: "Two regression fixes for md, one fairly recent and minor (diskstats has confusing data) and one older and more serious - RAID0 with non-power-of-2 chunksize corrupts data. I guess (almost) no-one uses non-power-of-2 chunks. Summary: - Revert recent change which broke IO accounting. - Fix bug with RAID0 arrays with non-power-of-2 chunk size" * tag 'md/4.0-rc7-fix' of git://neil.brown.name/md: md/raid0: fix bug with chunksize not a power of 2. md: fix md io stats accounting broken | 13 April 2015, 17:11:18 UTC |
| 9003601 | Linus Torvalds | 13 April 2015, 16:47:01 UTC | Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm Pull KVM updates from Paolo Bonzini: "First batch of KVM changes for 4.1 The most interesting bit here is irqfd/ioeventfd support for ARM and ARM64. Summary: ARM/ARM64: fixes for live migration, irqfd and ioeventfd support (enabling vhost, too), page aging s390: interrupt handling rework, allowing to inject all local interrupts via new ioctl and to get/set the full local irq state for migration and introspection. New ioctls to access memory by virtual address, and to get/set the guest storage keys. SIMD support. MIPS: FPU and MIPS SIMD Architecture (MSA) support. Includes some patches from Ralf Baechle's MIPS tree. x86: bugfixes (notably for pvclock, the others are small) and cleanups. Another small latency improvement for the TSC deadline timer" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (146 commits) KVM: use slowpath for cross page cached accesses kvm: mmu: lazy collapse small sptes into large sptes KVM: x86: Clear CR2 on VCPU reset KVM: x86: DR0-DR3 are not clear on reset KVM: x86: BSP in MSR_IA32_APICBASE is writable KVM: x86: simplify kvm_apic_map KVM: x86: avoid logical_map when it is invalid KVM: x86: fix mixed APIC mode broadcast KVM: x86: use MDA for interrupt matching kvm/ppc/mpic: drop unused IRQ_testbit KVM: nVMX: remove unnecessary double caching of MAXPHYADDR KVM: nVMX: checks for address bits beyond MAXPHYADDR on VM-entry KVM: x86: cache maxphyaddr CPUID leaf in struct kvm_vcpu KVM: vmx: pass error code with internal error #2 x86: vdso: fix pvclock races with task migration KVM: remove kvm_read_hva and kvm_read_hva_atomic KVM: x86: optimize delivery of TSC deadline timer interrupt KVM: x86: extract blocking logic from __vcpu_run kvm: x86: fix x86 eflags fixed bit KVM: s390: migrate vcpu interrupt state ... | 13 April 2015, 16:47:01 UTC |
| 4541fec | Linus Torvalds | 13 April 2015, 15:59:21 UTC | Merge tag 'linux-kselftest-4.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull kselftest updates from Shuah Khan: "This is a milestone update in a sense. Several new tests and install and packaging support is added in this update. This update adds install and packaging tools developed on top of back-end shared logic enhancemnets to run and install tests. In addition several timer tests are added. - New timer tests from John Stultz - rtc test from Prarit Bhargava - Enhancements to un and install tests from Michael Ellerman - Install and packaging tools from Shuah Khan - Cross-compilation enablement from Tyler Baker - A couple of bug fixes" * tag 'linux-kselftest-4.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: (42 commits) ftracetest: Do not use usleep directly selftest/mqueue: enable cross compilation selftest/ipc: enable cross compilation selftest/memfd: include default header install path selftest/mount: enable cross compilation selftest/memfd: enable cross compilation kselftests: timers: Make set-timer-lat fail more gracefully for !CAP_WAKE_ALARM selftests: Change memory on-off-test.sh name to be unique selftests: change cpu on-off-test.sh name to be unique selftests/mount: Make git ignore all binaries in mount test suite kselftests: timers: Reduce default runtime on inconsistency-check and set-timer-lat ftracetest: Convert exit -1 to exit $FAIL ftracetest: Cope properly with stack tracer not being enabled tools, update rtctest.c to verify passage of time Documentation, split up rtc.txt into documentation and test file selftests: Add tool to generate kselftest tar archive selftests: Add kselftest install tool selftests: Set CC using CROSS_COMPILE once in lib.mk selftests: Add install support for the powerpc tests selftests/timers: Use shared logic to run and install tests ... | 13 April 2015, 15:59:21 UTC |
| 39a8804 | Linus Torvalds | 12 April 2015, 22:12:50 UTC | Linux 4.0 | 12 April 2015, 22:12:50 UTC |
| 6a23b45 | Linus Torvalds | 12 April 2015, 17:56:12 UTC | Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull vfs and fs fixes from Al Viro: "Several AIO and OCFS2 fixes" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: ocfs2: _really_ sync the right range ocfs2_file_write_iter: keep return value and current position update in sync [regression] ocfs2: do *not* increment ->ki_pos twice ioctx_alloc(): fix vma (and file) leak on failure fix mremap() vs. ioctx_kill() race | 12 April 2015, 17:56:12 UTC |
| 54d8ccc | Linus Torvalds | 12 April 2015, 17:43:30 UTC | Merge branch 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal Pull last minute thermal-SoC management fixes from Eduardo Valentin: "Specifics: - Minor fixes on ST and RCAR thermal drivers. - Avoid flooding kernel log when driver returns -EAGAIN. Note: I am sending this pull on Rui's behalf while he fixes issues in his Linux box" * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal: drivers: thermal: st: remove several sparse warnings thermal: constify of_device_id array thermal: Do not log an error if thermal_zone_get_temp returns -EAGAIN thermal: rcar: Fix typo in r8a73a4 SoC name | 12 April 2015, 17:43:30 UTC |
| 56fd85b | Linus Torvalds | 11 April 2015, 22:57:36 UTC | Merge tag 'asoc-fix-v4.0-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound Pull last-minute ASoC fix from Mark Brown: "This patch backs out a change that came in during the merge window which selects a configuration for GPIO4 on pcm512x CODECs that may not be suitable for all systems using the device. Changes for v4.1 will make this properly configurable but for now it's safest to revert to the v3.19 behaviour and leave the pin configuration alone. Sorry for sending this direct at the last minute but due to the GPIO misuse it'd be really good to get it in the release and I'd not realised it hadn't been sent yet - between some travel, a job change and other non-urgent fixes coming in I'd lost track of the urgency. It's been in -next for several weeks now, is isolated to the driver and fairly clear to inspection" * tag 'asoc-fix-v4.0-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound: ASoC: pcm512x: Remove hardcoding of pll-lock to GPIO4 | 11 April 2015, 22:57:36 UTC |
| 14f0413 | Howard Mitchell | 23 March 2015, 21:17:01 UTC | ASoC: pcm512x: Remove hardcoding of pll-lock to GPIO4 Currently GPIO4 is hardcoded to output the pll-lock signal. Unfortunately this is after the pll-out GPIO is configured which is selectable in the device tree. Therefore it is not possible to use GPIO4 for pll-out. Therefore this patch removes the configuration of GPIO4. Signed-off-by: Howard Mitchell <hm@hmbedded.co.uk> Signed-off-by: Mark Brown <broonie@kernel.org> | 11 April 2015, 21:09:14 UTC |
| 12522ee | Linus Torvalds | 11 April 2015, 20:46:07 UTC | Revert "dmaengine: Add a warning for drivers not using the generic slave caps retrieval" This reverts commit ecc19d17868be9c9f8f00ed928791533c420f3e0. It added a new warning to try to encourage driver writers to set the device capabities properly, but drivers haven't been updated and in the meantime it just generaters a scary message that users cannot actually do anything about. Warnings like these are appropriate if you actually expect to fix the code that causes them. They are not appropriate for releases. Requested-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 11 April 2015, 20:46:07 UTC |
| ac21117 | Linus Torvalds | 09 April 2015, 21:12:22 UTC | blk-mq: initialize 'struct request' and associated data to zero Jan Engelhardt reports a strange oops with an invalid ->sense_buffer pointer in scsi_init_cmd_errh() with the blk-mq code. The sense_buffer pointer should have been initialized by the call to scsi_init_request() from blk_mq_init_rq_map(), but there seems to be some non-repeatable memory corruptor. This patch makes sure we initialize the whole struct request allocation (and the associated 'struct scsi_cmnd' for the SCSI case) to zero, by using __GFP_ZERO in the allocation. The old code initialized a couple of individual fields, leaving the rest undefined (although many of them are then initialized in later phases, like blk_mq_rq_ctx_init() etc. It's not entirely clear why this matters, but it's the rigth thing to do regardless, and with 4.0 imminent this is the defensive "let's just make sure everything is initialized properly" patch. Tested-by: Jan Engelhardt <jengelh@inai.de> Acked-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 11 April 2015, 20:42:16 UTC |
| 8fa5975 | Linus Torvalds | 11 April 2015, 17:52:13 UTC | Merge branch 'fixes' of git://git.infradead.org/users/vkoul/slave-dma Pull dmaengine fix from Vinod Koul: "I have one more fix to fix the boot warning on cppi driver due to missing capabilities" * 'fixes' of git://git.infradead.org/users/vkoul/slave-dma: dmaengine: cppi41: add missing bitfields | 11 April 2015, 17:52:13 UTC |
| 545124e | Linus Torvalds | 11 April 2015, 17:47:17 UTC | Merge tag 'for-linus-4.0-1' of git://git.code.sf.net/p/openipmi/linux-ipmi Pull late ipmi fixes from Corey Minyard: "Some annoying issues in the IPMI driver that would be good to have fixed before 4.0 is released. These got reported or discovered late, but they will avoid some situations that would cause lots of log spam and in one case a deadlock" * tag 'for-linus-4.0-1' of git://git.code.sf.net/p/openipmi/linux-ipmi: ipmi_ssif: Use interruptible completion for waiting in the thread ipmi/powernv: Fix minor locking bug ipmi: Handle BMCs that don't allow clearing the rcv irq bit | 11 April 2015, 17:47:17 UTC |
| ffeb13a | Felipe Balbi | 08 April 2015, 16:45:42 UTC | dmaengine: cppi41: add missing bitfields Add missing directions, residue_granularity, srd_addr_widths and dst_addr_widths bitfields. Without those we will see a kernel WARN() when loading musb on am335x devices. Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> | 11 April 2015, 15:42:58 UTC |
| 3b75232 | Denys Vlasenko | 10 April 2015, 13:06:59 UTC | perf/x86/64: Report regs_user->ax too in get_regs_user() I don't see why we report e.g. orix_ax, which is not always meaningful, but don't report ax, which is meaningful. Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1428671219-29341-4-git-send-email-dvlasenk@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org> | 11 April 2015, 11:08:53 UTC |
| 32caa06 | Denys Vlasenko | 10 April 2015, 13:06:58 UTC | perf/x86/64: Simplify regs_user->abi setting code in get_regs_user() user_64bit_mode(regs) basically checks regs->cs to point to a 64-bit segment. This check used to be unreliable here because regs->cs was not always correct in syscalls. Now regs->cs is always correct: in syscalls, in interrupts, in exceptions. No need to emply heuristics here. Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1428671219-29341-3-git-send-email-dvlasenk@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org> | 11 April 2015, 11:08:53 UTC |
| 5df71b3 | Denys Vlasenko | 10 April 2015, 13:06:57 UTC | perf/x86/64: Do report user_regs->cx while we are in syscall, in get_regs_user() Yes, it is true that cx contains return address. It's not clear why we trash it. Stop doing that. Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1428671219-29341-2-git-send-email-dvlasenk@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org> | 11 April 2015, 11:08:53 UTC |
| aa21df0 | Denys Vlasenko | 10 April 2015, 13:06:56 UTC | perf/x86/64: Do not guess user_regs->cs, ss, sp in get_regs_user() After recent changes to syscall entry points, user_regs->{cs,ss,sp} are always correct. (They used to be undefined while in syscalls). We can report them reliably, without guessing. Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1428671219-29341-1-git-send-email-dvlasenk@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org> | 11 April 2015, 11:08:52 UTC |
| 54cfa45 | Denys Vlasenko | 10 April 2015, 18:13:40 UTC | x86/asm/entry/32: Tidy up JNZ instructions after TESTs After TESTs, use logically correct JNZ mnemonic instead of JNE. This doesn't change code: md5: c3005b39a11fe582b7df7908561ad4ee entry_32.o.before.asm c3005b39a11fe582b7df7908561ad4ee entry_32.o.after.asm Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com> Acked-by: Andy Lutomirski <luto@kernel.org> Cc: Alexei Starovoitov <ast@plumgrid.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Kees Cook <keescook@chromium.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Will Drewry <wad@chromium.org> Link: http://lkml.kernel.org/r/1428689620-21881-1-git-send-email-dvlasenk@redhat.com [ Added object file comparison. ] Signed-off-by: Ingo Molnar <mingo@kernel.org> | 11 April 2015, 08:40:02 UTC |
| d0acf73 | Corey Minyard | 04 April 2015, 06:54:26 UTC | ipmi_ssif: Use interruptible completion for waiting in the thread The code was using an normal completion, but that caused stuck task errors after a while. Use an interruptible one to avoid that. Signed-off-by: Corey Minyard <cminyard@mvista.com> | 11 April 2015, 01:51:42 UTC |
| ad1ed2a | Alistair Popple | 10 April 2015, 07:32:20 UTC | ipmi/powernv: Fix minor locking bug If ipmi_powernv_recv(...) is called without a current message it prints a warning and returns. However it fails to release the message lock causing the system to dead lock during any subsequent IPMI operations. This error path should never normally be taken unless there are bugs elsewhere in the system. Signed-off-by: Alistair Popple <alistair@popple.id.au> Signed-off-by: Corey Minyard <cminyard@mvista.com> | 11 April 2015, 01:51:42 UTC |
| 1e7d6a4 | Corey Minyard | 03 April 2015, 17:13:48 UTC | ipmi: Handle BMCs that don't allow clearing the rcv irq bit Some BMCs don't let you clear the receive irq bit in the global enables. This is kind of silly, but they give an error if you try to clear it. Compensate for this by detecting the situation and working around it. Signed-off-by: Corey Minyard <cminyard@mvista.com> Tested-by: Thomas D <whissi@whissi.de> Reviewed-by: Thomas D <whissi@whissi.de> | 11 April 2015, 01:51:42 UTC |
| 3259b12 | Linus Torvalds | 11 April 2015, 00:41:47 UTC | Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "This is our remaining set of three fixes for 4.0: two oops fixes(one for cable pulls triggering oopses and the other be2iscsi specific) and one warn on in sysfs on multipath devices using enclosures" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: Defer processing of REQ_PREEMPT requests for blocked devices be2iscsi: Fix kernel panic when device initialization fails enclosure: fix WARN_ON removing an adapter in multi-path devices | 11 April 2015, 00:41:47 UTC |
| 49850a1 | Linus Torvalds | 10 April 2015, 23:56:40 UTC | Merge git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending Pull SCSI target fixes from Nicholas Bellinger: "Just a few small fixes: Two from Andy, the first addresses a v4.0 target specific regression to a user visible configfs attribute, and the second adds a set of missing brackets around IPv6 discovery portal information within iscsi-target. And one from Mike that fixes an OOPs regression in traditional iscsi-target when an iovec allocation fails, that has been present since v3.10.y code. (CC'd to stable)" * git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: iscsi target: fix oops when adding reject pdu iscsi-target: TargetAddress in SendTargets should bracket ipv6 addresses target: Allow userspace to write 1 to attrib/emulate_fua_write | 10 April 2015, 23:56:40 UTC |
| b815fc1 | Mike Christie | 10 April 2015, 07:47:27 UTC | iscsi target: fix oops when adding reject pdu This fixes a oops due to a double list add when adding a reject PDU for iscsit_allocate_iovecs allocation failures. The cmd has already been added to the conn_cmd_list in iscsit_setup_scsi_cmd, so this has us call iscsit_reject_cmd. Note that for ERL0 the reject PDU is not actually sent, so this patch is not completely tested. Just verified we do not oops. The problem is the add reject functions return -1 which is returned all the way up to iscsi_target_rx_thread which for ERL0 will drop the connection. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Cc: <stable@vger.kernel.org> # v3.10+ Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org> | 10 April 2015, 19:33:55 UTC |
| cfc4957 | Linus Torvalds | 10 April 2015, 18:16:54 UTC | Merge tag 'sound-4.0' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "Here are fixes gathered for 4.0-final; one FireFire endian fix, two USB-audio quirks, and three HD-audio quirks. All relatively small and device-specific fixes, should be pretty safe to apply" * tag 'sound-4.0' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: usb - Creative USB X-Fi Pro SB1095 volume knob support ALSA: hda - Fix headphone pin config for Lifebook T731 ALSA: bebob: fix to processing in big-endian machine for sending cue ALSA: hda/realtek - Make more stable to get pin sense for ALC283 ALSA: usb-audio: don't try to get Benchmark DAC1 sample rate ALSA: hda/realtek - Support Dell headset mode for ALC256 | 10 April 2015, 18:16:54 UTC |
| 6fb805f | Linus Torvalds | 10 April 2015, 17:51:34 UTC | Merge tag 'nios2-fixes-v4.0-final' of git://git.rocketboards.org/linux-socfpga-next Pull arch/nios2 fixes from Ley Foon Tan: "There are 3 arch/nios2 fixes for 4.0 final: - fix cache coherency issue when debugging with gdb - move restart_block to struct task_struct (aligned with other architectures) - fix for missing registers defines for ptrace" * tag 'nios2-fixes-v4.0-final' of git://git.rocketboards.org/linux-socfpga-next: nios2: fix cache coherency issue when debug with gdb nios2: add missing ptrace registers defines nios2: signal: Move restart_block to struct task_struct | 10 April 2015, 17:51:34 UTC |
| ca3f087 | Radim Krčmář | 08 April 2015, 12:16:48 UTC | KVM: use slowpath for cross page cached accesses kvm_write_guest_cached() does not mark all written pages as dirty and code comments in kvm_gfn_to_hva_cache_init() talk about NULL memslot with cross page accesses. Fix all the easy way. The check is '<= 1' to have the same result for 'len = 0' cache anywhere in the page. (nr_pages_needed is 0 on page boundary.) Fixes: 8f964525a121 ("KVM: Allow cross page reads and writes from cached translations.") Signed-off-by: Radim Krčmář <rkrcmar@redhat.com> Message-Id: <20150408121648.GA3519@potion.brq.redhat.com> Reviewed-by: Wanpeng Li <wanpeng.li@linux.intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> | 10 April 2015, 14:04:45 UTC |
| 1912c7a | Mike Travis | 09 April 2015, 18:26:31 UTC | x86/apic/uv: Update the UV APIC HUB check Update the check for UV2000/3000. Note when the HUB is not recognized. Signed-off-by: Mike Travis <travis@sgi.com> Acked-by: Hedi Berriche <hedi@sgi.com> Acked-by: Dimitri Sivanich <sivanich@sgi.com> Link: http://lkml.kernel.org/r/20150409182629.267239403@asylum.americas.sgi.com Signed-off-by: Ingo Molnar <mingo@kernel.org> | 10 April 2015, 08:16:08 UTC |
| 379b97e | Mike Travis | 09 April 2015, 18:26:30 UTC | x86/apic/uv: Update the UV APIC driver check Fix a bug in the OEM check function that determines if the system is a UV system and the BIOS is compatible with the kernel's UV apic driver. This prevents some possibly obscure panics and guards the system against being started on SGI hardware that does not have the required kernel support. Signed-off-by: Mike Travis <travis@sgi.com> Acked-by: Hedi Berriche <hedi@sgi.com> Acked-by: Dimitri Sivanich <sivanich@sgi.com> Link: http://lkml.kernel.org/r/20150409182629.112998930@asylum.americas.sgi.com Signed-off-by: Ingo Molnar <mingo@kernel.org> | 10 April 2015, 08:16:07 UTC |
| 7a4e017 | Mike Travis | 09 April 2015, 18:26:29 UTC | x86/apic/uv: Update the APIC UV OEM check Optimize the first "SGI" OEM check to return faster if the system is not an SGI or UV system. Signed-off-by: Mike Travis <travis@sgi.com> Acked-by: Hedi Berriche <hedi@sgi.com> Acked-by: Dimitri Sivanich <sivanich@sgi.com> Link: http://lkml.kernel.org/r/20150409182628.952357922@asylum.americas.sgi.com Signed-off-by: Ingo Molnar <mingo@kernel.org> | 10 April 2015, 08:16:07 UTC |
| 47d6897 | NeilBrown | 10 April 2015, 03:19:04 UTC | md/raid0: fix bug with chunksize not a power of 2. Since commit 20d0189b1012a37d2533a87fb451f7852f2418d1 in v3.14-rc1 RAID0 has performed incorrect calculations when the chunksize is not a power of 2. This happens because "sector_div()" modifies its first argument, but this wasn't taken into account in the patch. So restore that first arg before re-using the variable. Reported-by: Joe Landman <joe.landman@gmail.com> Reported-by: Dave Chinner <david@fromorbit.com> Fixes: 20d0189b1012a37d2533a87fb451f7852f2418d1 Cc: stable@vger.kernel.org (3.14 and later). Signed-off-by: NeilBrown <neilb@suse.de> | 10 April 2015, 05:36:31 UTC |
| 4a89c30 | Ley Foon Tan | 10 April 2015, 03:10:08 UTC | nios2: fix cache coherency issue when debug with gdb Remove the end address checking for flushda function. We need to flush each address line for flushda instruction, from start to end address. This is because flushda instruction only flush the cache if tag and line fields are matched. Change to use ldwio instruction (bypass cache) to load the instruction that causing trap. Our interest is the actual instruction that executed by the processor, this should be uncached. Note, EA address might be an userspace cached address. Signed-off-by: Ley Foon Tan <lftan@altera.com> | 10 April 2015, 03:10:08 UTC |
| e5e02de | Linus Torvalds | 10 April 2015, 00:44:27 UTC | Merge tag 'pm+acpi-4.0-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management and ACPI fixes from Rafael Wysocki: "These are stable-candidate fixes of some recently reported issues in the cpufreq core, cpuidle core, the ACPI cpuidle driver and the hibernate core. Specifics: - Revert a 3.17 hibernate commit that was supposed to fix an issue related to e820 reserved regions, but broke resume from hibernation on Lenovo x230 (Rafael J Wysocki). - Prevent the ACPI cpuidle driver from overwriting the name and description of the C0 state set by the core when the list of C-states changes (Thomas Schlichter). - Remove the no longer needed state_count field from struct cpuidle_device which prevents the list of C-states shown by the sysfs interface from becoming incorrect when the current number of them is different from the number of C-states on boot (Bartlomiej Zolnierkiewicz). - The cpufreq core updates the policy object of the only online CPU during system resume to make it reflect the current hardware state, but it always assumes that CPU to be CPU0 which need not be the case, so fix the code to avoid that assumption (Viresh Kumar)" * tag 'pm+acpi-4.0-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: Revert "PM / hibernate: avoid unsafe pages in e820 reserved regions" cpuidle: ACPI: do not overwrite name and description of C0 cpuidle: remove state_count field from struct cpuidle_device cpufreq: Schedule work for the first-online CPU on resume | 10 April 2015, 00:44:27 UTC |
| b2d5fb9 | Rafael J. Wysocki | 09 April 2015, 21:25:23 UTC | Merge branches 'pm-sleep', 'pm-cpufreq' and 'pm-cpuidle' * pm-sleep: Revert "PM / hibernate: avoid unsafe pages in e820 reserved regions" * pm-cpufreq: cpufreq: Schedule work for the first-online CPU on resume * pm-cpuidle: cpuidle: ACPI: do not overwrite name and description of C0 cpuidle: remove state_count field from struct cpuidle_device | 09 April 2015, 21:25:23 UTC |
| 3cfb2f7 | Linus Torvalds | 09 April 2015, 17:17:44 UTC | Merge tag 'pci-v4.0-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI fixes from Bjorn Helgaas: "Here are some fixes for v4.0. I apologize for how late they are. We were hoping for some better fixes, but couldn't get them polished in time. These fix: - a Xen domU oops with PCI passthrough devices - a sparc T5 boot failure - a STM SPEAr13xx crash (use after initdata freed) - a cpcihp hotplug driver thinko - an AER thinko that printed stack junk Details: Enumeration - Don't look for ACPI hotplug parameters if ACPI is disabled (Bjorn Helgaas) Resource management - Revert "sparc/PCI: Clip bridge windows to fit in upstream windows" (Bjorn Helgaas) AER - Avoid info leak in __print_tlp_header() (Rasmus Villemoes) PCI device hotplug - Add missing curly braces in cpci_configure_slot() (Dan Carpenter) ST Microelectronics SPEAr13xx host bridge driver - Drop __initdata from spear13xx_pcie_driver (Matwey V. Kornilov) * tag 'pci-v4.0-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: Revert "sparc/PCI: Clip bridge windows to fit in upstream windows" PCI: Don't look for ACPI hotplug parameters if ACPI is disabled PCI: cpcihp: Add missing curly braces in cpci_configure_slot() PCI/AER: Avoid info leak in __print_tlp_header() PCI: spear: Drop __initdata from spear13xx_pcie_driver | 09 April 2015, 17:17:44 UTC |
| 3dc8523 | Dmitry M. Fedin | 09 April 2015, 14:37:03 UTC | ALSA: usb - Creative USB X-Fi Pro SB1095 volume knob support Adds an entry for Creative USB X-Fi to the rc_config array in mixer_quirks.c to allow use of volume knob on the device. Adds support for newer X-Fi Pro card, known as "Model No. SB1095" with USB ID "041e:3237" Signed-off-by: Dmitry M. Fedin <dmitry.fedin@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> | 09 April 2015, 15:20:39 UTC |
| 64b4e25 | Al Viro | 08 April 2015, 21:00:32 UTC | ocfs2: _really_ sync the right range "ocfs2 syncs the wrong range" had been broken; prior to it the code was doing the wrong thing in case of O_APPEND, all right, but _after_ it we were syncing the wrong range in 100% cases. *ppos, aka iocb->ki_pos is incremented prior to that point, so we are always doing sync on the area _after_ the one we'd written to. Spotted by Joseph Qi <joseph.qi@huawei.com> back in January; unfortunately, I'd missed his mail back then ;-/ Cc: stable@vger.kernel.org Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> | 09 April 2015, 11:18:48 UTC |
| e3e29f9 | Ley Foon Tan | 09 April 2015, 10:28:05 UTC | nios2: add missing ptrace registers defines These are all register available in nios2. Signed-off-by: Ley Foon Tan <lftan@altera.com> | 09 April 2015, 10:28:05 UTC |
| b449159 | Aravind Gopalakrishnan | 09 April 2015, 08:51:48 UTC | x86/iommu: Fix header comments regarding standard and _FINISH macros The comment line regarding IOMMU_INIT and IOMMU_INIT_FINISH macros is incorrect: "The standard vs the _FINISH differs in that the _FINISH variant will continue detecting other IOMMUs in the call list..." It should be "..the *standard* variant will continue detecting..." Fix that. Also, make it readable while at it. Signed-off-by: Aravind Gopalakrishnan <Aravind.Gopalakrishnan@amd.com> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: konrad.wilk@oracle.com Fixes: 6e9636693373 ("x86, iommu: Update header comments with appropriate naming") Link: http://lkml.kernel.org/r/1428508017-5316-1-git-send-email-Aravind.Gopalakrishnan@amd.com Signed-off-by: Ingo Molnar <mingo@kernel.org> | 09 April 2015, 08:56:31 UTC |
| a37f34a | Denys Vlasenko | 07 April 2015, 20:43:44 UTC | x86/asm/entry/64: Reduce padding in execve stubs execve stubs are 7 bytes only. Padding them to 16 bytes is a waste. text data bss dec hex filename 12594 0 0 12594 3132 entry_64.o.before 12530 0 0 12530 30f2 entry_64.o Run-tested. Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com> Cc: Alexei Starovoitov <ast@plumgrid.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Kees Cook <keescook@chromium.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Drewry <wad@chromium.org> Link: http://lkml.kernel.org/r/1428439424-7258-8-git-send-email-dvlasenk@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org> | 09 April 2015, 08:31:26 UTC |
| 54a81e9 | Denys Vlasenko | 07 April 2015, 20:43:43 UTC | x86/asm/entry/64: Remove GET_THREAD_INFO() in ret_from_fork It used to be used to check for _TIF_IA32, but the check has been removed. Remove GET_THREAD_INFO() too. Run-tested. Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com> Cc: Alexei Starovoitov <ast@plumgrid.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Kees Cook <keescook@chromium.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Drewry <wad@chromium.org> Link: http://lkml.kernel.org/r/1428439424-7258-7-git-send-email-dvlasenk@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org> | 09 April 2015, 08:31:26 UTC |
| 66ad4ef | Denys Vlasenko | 07 April 2015, 20:43:42 UTC | x86/asm/entry/64: Simplify jumps in ret_from_fork Replace test jz 1f jmp label 1: with test jnz label Run-tested. Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com> Cc: Alexei Starovoitov <ast@plumgrid.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Kees Cook <keescook@chromium.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Drewry <wad@chromium.org> Link: http://lkml.kernel.org/r/1428439424-7258-6-git-send-email-dvlasenk@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org> | 09 April 2015, 08:31:25 UTC |
| a30b008 | Denys Vlasenko | 07 April 2015, 20:43:41 UTC | x86/asm/entry/64: Remove a redundant jump Jumping to the very next instruction is not very useful: jmp label label: Removing the jump. Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com> Cc: Alexei Starovoitov <ast@plumgrid.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Kees Cook <keescook@chromium.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Drewry <wad@chromium.org> Link: http://lkml.kernel.org/r/1428439424-7258-5-git-send-email-dvlasenk@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org> | 09 April 2015, 08:31:25 UTC |
| 772951c | Denys Vlasenko | 07 April 2015, 20:43:40 UTC | x86/asm/entry/64: Optimize [v]fork/clone stubs Replace "call func; ret" with "jmp func". Run-tested. Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com> Cc: Alexei Starovoitov <ast@plumgrid.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Kees Cook <keescook@chromium.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Drewry <wad@chromium.org> Link: http://lkml.kernel.org/r/1428439424-7258-4-git-send-email-dvlasenk@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org> | 09 April 2015, 08:31:25 UTC |
| 0f90fb9 | Denys Vlasenko | 07 April 2015, 20:43:39 UTC | x86/asm/entry: Zero EXTRA_REGS for stub32_execve() too The change which affected how execve clears EXTRA_REGS missed 32-bit execve syscalls. Fix this by using 64-bit execve stub epilogue for them too. Run-tested. Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com> Cc: Alexei Starovoitov <ast@plumgrid.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Kees Cook <keescook@chromium.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Drewry <wad@chromium.org> Link: http://lkml.kernel.org/r/1428439424-7258-3-git-send-email-dvlasenk@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org> | 09 April 2015, 08:31:24 UTC |
| 05f1752 | Denys Vlasenko | 07 April 2015, 20:43:38 UTC | x86/asm/entry/64: Move stub_x32_execvecloser() to stub_execveat() This is a preparatory patch for moving stub32_execve[at]() to this file. It makes sense to have all execve stubs in one place, so that they can reuse code. Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com> Cc: Alexei Starovoitov <ast@plumgrid.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Kees Cook <keescook@chromium.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Drewry <wad@chromium.org> Link: http://lkml.kernel.org/r/1428439424-7258-2-git-send-email-dvlasenk@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org> | 09 April 2015, 08:31:24 UTC |
| 31f0119 | Denys Vlasenko | 07 April 2015, 20:43:37 UTC | x86/asm/entry/64: Use common code for rt_sigreturn() epilogue Similarly to stub_execve, we can reuse the epilogue in stub_rt_sigreturn() and stub_x32_rt_sigreturn(). Add a comment explaining why we can't eliminage SAVE_EXTRA_REGS here. Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com> Cc: Alexei Starovoitov <ast@plumgrid.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Kees Cook <keescook@chromium.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Drewry <wad@chromium.org> Link: http://lkml.kernel.org/r/1428439424-7258-1-git-send-email-dvlasenk@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org> | 09 April 2015, 08:31:24 UTC |
| 58995a9 | Anton Blanchard | 09 April 2015, 03:51:32 UTC | powerpc, jump_label: Include linux/jump_label.h to get HAVE_JUMP_LABEL define Commit 1bc9e47aa8e4 ("powerpc/jump_label: Use HAVE_JUMP_LABEL") converted uses of CONFIG_JUMP_LABEL to HAVE_JUMP_LABEL in some assembly files. HAVE_JUMP_LABEL is defined in linux/jump_label.h, so we need to include this or we always get the non jump label fallback code. Signed-off-by: Anton Blanchard <anton@samba.org> Acked-by: Michael Ellerman <mpe@ellerman.id.au> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: benh@kernel.crashing.org Cc: catalin.marinas@arm.com Cc: davem@davemloft.net Cc: heiko.carstens@de.ibm.com Cc: jbaron@akamai.com Cc: linux@arm.linux.org.uk Cc: linuxppc-dev@lists.ozlabs.org Cc: liuj97@gmail.com Cc: mgorman@suse.de Cc: mmarek@suse.cz Cc: paulus@samba.org Cc: ralf@linux-mips.org Cc: rostedt@goodmis.org Cc: schwidefsky@de.ibm.com Cc: will.deacon@arm.com Fixes: 1bc9e47aa8e4 ("powerpc/jump_label: Use HAVE_JUMP_LABEL") Link: http://lkml.kernel.org/r/1428551492-21977-3-git-send-email-anton@samba.org Signed-off-by: Ingo Molnar <mingo@kernel.org> | 09 April 2015, 07:40:29 UTC |
| c0ccf6f | Anton Blanchard | 09 April 2015, 03:51:31 UTC | jump_label: Allow jump labels to be used in assembly To use jump labels in assembly we need the HAVE_JUMP_LABEL define, so we select a fallback version if the toolchain does not support them. Modify linux/jump_label.h so it can be included by assembly files. We also need to add -DCC_HAVE_ASM_GOTO to KBUILD_AFLAGS. Signed-off-by: Anton Blanchard <anton@samba.org> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: benh@kernel.crashing.org Cc: catalin.marinas@arm.com Cc: davem@davemloft.net Cc: heiko.carstens@de.ibm.com Cc: jbaron@akamai.com Cc: linux@arm.linux.org.uk Cc: linuxppc-dev@lists.ozlabs.org Cc: liuj97@gmail.com Cc: mgorman@suse.de Cc: mmarek@suse.cz Cc: mpe@ellerman.id.au Cc: paulus@samba.org Cc: ralf@linux-mips.org Cc: rostedt@goodmis.org Cc: schwidefsky@de.ibm.com Cc: will.deacon@arm.com Link: http://lkml.kernel.org/r/1428551492-21977-2-git-send-email-anton@samba.org Signed-off-by: Ingo Molnar <mingo@kernel.org> | 09 April 2015, 07:40:24 UTC |
| 55dd0df | Anton Blanchard | 09 April 2015, 03:51:30 UTC | jump_label: Allow asm/jump_label.h to be included in assembly Wrap asm/jump_label.h for all archs with #ifndef __ASSEMBLY__. Since these are kernel only headers, we don't need #ifdef __KERNEL__ so can simplify things a bit. If an architecture wants to use jump labels in assembly, it will still need to define a macro to create the __jump_table entries (see ARCH_STATIC_BRANCH in the powerpc asm/jump_label.h for an example). Signed-off-by: Anton Blanchard <anton@samba.org> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: benh@kernel.crashing.org Cc: catalin.marinas@arm.com Cc: davem@davemloft.net Cc: heiko.carstens@de.ibm.com Cc: jbaron@akamai.com Cc: linux@arm.linux.org.uk Cc: linuxppc-dev@lists.ozlabs.org Cc: liuj97@gmail.com Cc: mgorman@suse.de Cc: mmarek@suse.cz Cc: mpe@ellerman.id.au Cc: paulus@samba.org Cc: ralf@linux-mips.org Cc: rostedt@goodmis.org Cc: schwidefsky@de.ibm.com Cc: will.deacon@arm.com Link: http://lkml.kernel.org/r/1428551492-21977-1-git-send-email-anton@samba.org Signed-off-by: Ingo Molnar <mingo@kernel.org> | 09 April 2015, 07:40:23 UTC |
| 01ac33c | Jason Low | 08 April 2015, 19:39:19 UTC | locking/mutex: Further simplify mutex_spin_on_owner() Similar to what Linus suggested for rwsem_spin_on_owner(), in mutex_spin_on_owner() instead of having while (true) and breaking out of the spin loop on lock->owner != owner, we can have the loop directly check for while (lock->owner == owner) to improve the readability of the code. It also shrinks the code a bit: text data bss dec hex filename 3721 0 0 3721 e89 mutex.o.before 3705 0 0 3705 e79 mutex.o.after Signed-off-by: Jason Low <jason.low2@hp.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Aswin Chandramouleeswaran <aswin@hp.com> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tim Chen <tim.c.chen@linux.intel.com> Link: http://lkml.kernel.org/r/1428521960-5268-2-git-send-email-jason.low2@hp.com [ Added code generation info. ] Signed-off-by: Ingo Molnar <mingo@kernel.org> | 09 April 2015, 06:10:23 UTC |
| 20624d1 | Linus Torvalds | 08 April 2015, 22:12:25 UTC | Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux Pull drm fixes from Dave Airlie: "Final drm fixes: one core locking imbalance regression, and a bunch of i915 baytrail s/r fixes" * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm: fix drm_mode_getconnector() locking imbalance regression drm/i915/vlv: remove wait for previous GFX clk disable request drm/i915/chv: Remove Wait for a previous gfx force-off drm/i915/vlv: save/restore the power context base reg | 08 April 2015, 22:12:25 UTC |
| 9a08da1 | Linus Torvalds | 08 April 2015, 21:51:56 UTC | Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client Pull ceph revert from Sage Weil: "This corrects a recent misadventure with __GFP_MEMALLOC and PF_MEMALLOC; it turns out it's not a good fit for RBD and we're better off relying on dirty page throttling" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client: Revert "libceph: use memalloc flags for net IO" | 08 April 2015, 21:51:56 UTC |
| b97fdef | Linus Torvalds | 08 April 2015, 21:42:49 UTC | Merge branch 'akpm' (patches from Andrew) Merge misc fixes from Andrew Morton: "Three fixes" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: mm: numa: disable change protection for vma(VM_HUGETLB) include/linux/dmapool.h: declare struct device mm: move zone lock to a different cache line than order-0 free page lists | 08 April 2015, 21:42:49 UTC |
| 3afe9f8 | Linus Torvalds | 07 April 2015, 17:33:49 UTC | Copy the kernel module data from user space in chunks Unlike most (all?) other copies from user space, kernel module loading is almost unlimited in size. So we do a potentially huge "copy_from_user()" when we copy the module data from user space to the kernel buffer, which can be a latency concern when preemption is disabled (or voluntary). Also, because 'copy_from_user()' clears the tail of the kernel buffer on failures, even a *failed* copy can end up wasting a lot of time. Normally neither of these are concerns in real life, but they do trigger when doing stress-testing with trinity. Running in a VM seems to add its own overheadm causing trinity module load testing to even trigger the watchdog. The simple fix is to just chunk up the module loading, so that it never tries to copy insanely big areas in one go. That bounds the latency, and also the amount of (unnecessarily, in this case) cleared memory for the failure case. Reported-by: Sasha Levin <sasha.levin@oracle.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 08 April 2015, 21:35:48 UTC |
| cae2a17 | Linus Torvalds | 06 April 2015, 17:26:17 UTC | x86: clean up/fix 'copy_in_user()' tail zeroing The rule for 'copy_from_user()' is that it zeroes the remaining kernel buffer even when the copy fails halfway, just to make sure that we don't leave uninitialized kernel memory around. Because even if we check for errors, some kernel buffers stay around after thge copy (think page cache). However, the x86-64 logic for user copies uses a copy_user_generic() function for all the cases, that set the "zerorest" flag for any fault on the source buffer. Which meant that it didn't just try to clear the kernel buffer after a failure in copy_from_user(), it also tried to clear the destination user buffer for the "copy_in_user()" case. Not only is that pointless, it also means that the clearing code has to worry about the tail clearing taking page faults for the user buffer case. Which is just stupid, since that case shouldn't happen in the first place. Get rid of the whole "zerorest" thing entirely, and instead just check if the destination is in kernel space or not. And then just use memset() to clear the tail of the kernel buffer if necessary. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 08 April 2015, 21:28:45 UTC |
| f4274e2 | Dave Airlie | 08 April 2015, 20:59:50 UTC | Merge tag 'drm-intel-fixes-2015-04-08' of git://anongit.freedesktop.org/drm-intel into drm-fixes three commits, all cc: stable, to address Baytrail suspend/resume issues. * tag 'drm-intel-fixes-2015-04-08' of git://anongit.freedesktop.org/drm-intel: drm/i915/vlv: remove wait for previous GFX clk disable request drm/i915/chv: Remove Wait for a previous gfx force-off drm/i915/vlv: save/restore the power context base reg | 08 April 2015, 20:59:50 UTC |
| 9ce5a23 | Al Viro | 08 April 2015, 19:45:02 UTC | ocfs2_file_write_iter: keep return value and current position update in sync Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> | 08 April 2015, 20:59:12 UTC |
| cf1b5ea | Al Viro | 08 April 2015, 19:41:17 UTC | [regression] ocfs2: do *not* increment ->ki_pos twice generic_file_direct_write() already does that. Broken by "ocfs2: do not fallback to buffer I/O write if appending" Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> | 08 April 2015, 20:58:59 UTC |
| cc7016a | Takashi Iwai | 08 April 2015, 18:47:55 UTC | ALSA: hda - Fix headphone pin config for Lifebook T731 Some BIOS version of Fujitsu Lifebook T731 seems to set up the headphone pin (0x21) without the assoc number 0x0f while it's set only to the output on the docking port (0x1a). With the recent commit [03ad6a8c93b6: ALSA: hda - Fix "PCM" name being used on one DAC when there are two DACs], this resulted in the weird mixer element mapping where the headphone on the laptop is assigned as a shared volume with the speaker and the docking port is assigned as an individual headphone. This patch improves the situation by correcting the headphone pin config to the more appropriate value. Reported-and-tested-by: Taylor Smock <smocktaylor@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> | 08 April 2015, 18:52:52 UTC |
| bba0bdd | Bart Van Assche | 04 March 2015, 09:31:47 UTC | Defer processing of REQ_PREEMPT requests for blocked devices SCSI transport drivers and SCSI LLDs block a SCSI device if the transport layer is not operational. This means that in this state no requests should be processed, even if the REQ_PREEMPT flag has been set. This patch avoids that a rescan shortly after a cable pull sporadically triggers the following kernel oops: BUG: unable to handle kernel paging request at ffffc9001a6bc084 IP: [<ffffffffa04e08f2>] mlx4_ib_post_send+0xd2/0xb30 [mlx4_ib] Process rescan-scsi-bus (pid: 9241, threadinfo ffff88053484a000, task ffff880534aae100) Call Trace: [<ffffffffa0718135>] srp_post_send+0x65/0x70 [ib_srp] [<ffffffffa071b9df>] srp_queuecommand+0x1cf/0x3e0 [ib_srp] [<ffffffffa0001ff1>] scsi_dispatch_cmd+0x101/0x280 [scsi_mod] [<ffffffffa0009ad1>] scsi_request_fn+0x411/0x4d0 [scsi_mod] [<ffffffff81223b37>] __blk_run_queue+0x27/0x30 [<ffffffff8122a8d2>] blk_execute_rq_nowait+0x82/0x110 [<ffffffff8122a9c2>] blk_execute_rq+0x62/0xf0 [<ffffffffa000b0e8>] scsi_execute+0xe8/0x190 [scsi_mod] [<ffffffffa000b2f3>] scsi_execute_req+0xa3/0x130 [scsi_mod] [<ffffffffa000c1aa>] scsi_probe_lun+0x17a/0x450 [scsi_mod] [<ffffffffa000ce86>] scsi_probe_and_add_lun+0x156/0x480 [scsi_mod] [<ffffffffa000dc2f>] __scsi_scan_target+0xdf/0x1f0 [scsi_mod] [<ffffffffa000dfa3>] scsi_scan_host_selected+0x183/0x1c0 [scsi_mod] [<ffffffffa000edfb>] scsi_scan+0xdb/0xe0 [scsi_mod] [<ffffffffa000ee13>] store_scan+0x13/0x20 [scsi_mod] [<ffffffff811c8d9b>] sysfs_write_file+0xcb/0x160 [<ffffffff811589de>] vfs_write+0xce/0x140 [<ffffffff81158b53>] sys_write+0x53/0xa0 [<ffffffff81464592>] system_call_fastpath+0x16/0x1b [<00007f611c9d9300>] 0x7f611c9d92ff Reported-by: Max Gurtuvoy <maxg@mellanox.com> Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Cc: <stable@vger.kernel.org> Signed-off-by: James Bottomley <JBottomley@Odin.com> | 08 April 2015, 16:41:41 UTC |
| 2e7cee0 | John Soni Jose | 12 February 2015, 01:15:47 UTC | be2iscsi: Fix kernel panic when device initialization fails Kernel panic was happening as iscsi_host_remove() was called on a host which was not yet added. Signed-off-by: John Soni Jose <sony.john-n@emulex.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Cc: <stable@vger.kernel.org> Signed-off-by: James Bottomley <JBottomley@Odin.com> | 08 April 2015, 16:40:57 UTC |
| a053fc3 | Takashi Sakamoto | 08 April 2015, 16:15:03 UTC | ALSA: bebob: fix to processing in big-endian machine for sending cue Some M-Audio devices require to receive bootup command just after powering on, while codes in BeBoB driver doesn't work properly in big-endian machine because the command should be aligned by little-endian. This commit fixes this bug. This fix should go to stable kernel. Cc: Takayuki Shiroma <t.shiroma.oki@gmail.com> Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> | 08 April 2015, 16:23:10 UTC |
| d10b730 | Bjorn Helgaas | 08 April 2015, 15:04:55 UTC | Revert "sparc/PCI: Clip bridge windows to fit in upstream windows" This reverts commit d63e2e1f3df904bf6bd150bdafb42ddbb3257ea8. David Ahern reported that d63e2e1f3df9 breaks booting on an 8-socket T5 sparc system. He also verified that the system boots with d63e2e1f3df9 reverted. Yinghai has some fixes, but they need a little more polishing than we can do before v4.0. Link: http://lkml.kernel.org/r/5514391F.2030300@oracle.com # report Link: http://lkml.kernel.org/r/1427857069-6789-1-git-send-email-yinghai@kernel.org # patches Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> CC: stable@vger.kernel.org # v3.19+ | 08 April 2015, 15:04:55 UTC |
| 8647ca9 | Bjorn Helgaas | 24 March 2015, 16:12:45 UTC | PCI: Don't look for ACPI hotplug parameters if ACPI is disabled Booting a v3.18 or newer Xen domU kernel with PCI devices passed through results in an oops (this is a 32-bit 3.13.11 dom0 with a 64-bit 4.4.0 hypervisor and 32-bit domU): BUG: unable to handle kernel paging request at 0030303e IP: [<c06ed0e6>] acpi_ns_validate_handle+0x12/0x1a Call Trace: [<c06eda4d>] ? acpi_evaluate_object+0x31/0x1fc [<c06b78e1>] ? pci_get_hp_params+0x111/0x4e0 [<c0407bc7>] ? xen_force_evtchn_callback+0x17/0x30 [<c04085fb>] ? xen_restore_fl_direct_reloc+0x4/0x4 [<c0699d34>] ? pci_device_add+0x24/0x450 Don't look for ACPI configuration information if ACPI has been disabled. I don't think this is the best fix, because we can boot plain Linux (no Xen) with "acpi=off", and we don't need this check in pci_get_hp_params(). There should be a better fix that would make Xen domU work the same way. The domU kernel has ACPI support but it has no AML. There should be a way to initialize the ACPI data structures so things fail gracefully rather than oopsing. This is an interim fix to address the regression. Fixes: 6cd33649fa83 ("PCI: Add pci_configure_device() during enumeration") Link: https://bugzilla.kernel.org/show_bug.cgi?id=96301 Reported-by: Michael D Labriola <mlabriol@gdeb.com> Tested-by: Michael D Labriola <mlabriol@gdeb.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> CC: stable@vger.kernel.org # v3.18+ | 08 April 2015, 14:59:55 UTC |
| a59d719 | Kailang Yang | 08 April 2015, 08:34:00 UTC | ALSA: hda/realtek - Make more stable to get pin sense for ALC283 Pin sense will active when power pin is wake up. Power pin will not wake up immediately during resume state. Add some delay to wait for power pin activated. Signed-off-by: Kailang Yang <kailang@realtek.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> | 08 April 2015, 09:29:45 UTC |
| 3ea3b7f | Wanpeng Li | 03 April 2015, 07:40:25 UTC | kvm: mmu: lazy collapse small sptes into large sptes Dirty logging tracks sptes in 4k granularity, meaning that large sptes have to be split. If live migration is successful, the guest in the source machine will be destroyed and large sptes will be created in the destination. However, the guest continues to run in the source machine (for example if live migration fails), small sptes will remain around and cause bad performance. This patch introduce lazy collapsing of small sptes into large sptes. The rmap will be scanned in ioctl context when dirty logging is stopped, dropping those sptes which can be collapsed into a single large-page spte. Later page faults will create the large-page sptes. Reviewed-by: Xiao Guangrong <guangrong.xiao@linux.intel.com> Signed-off-by: Wanpeng Li <wanpeng.li@linux.intel.com> Message-Id: <1428046825-6905-1-git-send-email-wanpeng.li@linux.intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> | 08 April 2015, 08:47:04 UTC |
| 1119022 | Nadav Amit | 02 April 2015, 00:10:38 UTC | KVM: x86: Clear CR2 on VCPU reset CR2 is not cleared as it should after reset. See Intel SDM table named "IA-32 Processor States Following Power-up, Reset, or INIT". Signed-off-by: Nadav Amit <namit@cs.technion.ac.il> Message-Id: <1427933438-12782-5-git-send-email-namit@cs.technion.ac.il> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> | 08 April 2015, 08:47:03 UTC |
| ae561ed | Nadav Amit | 02 April 2015, 00:10:37 UTC | KVM: x86: DR0-DR3 are not clear on reset DR0-DR3 are not cleared as they should during reset and when they are set from userspace. It appears to be caused by c77fb5fe6f03 ("KVM: x86: Allow the guest to run with dirty debug registers"). Force their reload on these situations. Signed-off-by: Nadav Amit <namit@cs.technion.ac.il> Message-Id: <1427933438-12782-4-git-send-email-namit@cs.technion.ac.il> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> | 08 April 2015, 08:47:03 UTC |
| 58d269d | Nadav Amit | 02 April 2015, 00:10:36 UTC | KVM: x86: BSP in MSR_IA32_APICBASE is writable After reset, the CPU can change the BSP, which will be used upon INIT. Reset should return the BSP which QEMU asked for, and therefore handled accordingly. To quote: "If the MP protocol has completed and a BSP is chosen, subsequent INITs (either to a specific processor or system wide) do not cause the MP protocol to be repeated." [Intel SDM 8.4.2: MP Initialization Protocol Requirements and Restrictions] Signed-off-by: Nadav Amit <namit@cs.technion.ac.il> Message-Id: <1427933438-12782-3-git-send-email-namit@cs.technion.ac.il> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> | 08 April 2015, 08:47:02 UTC |
| 3b5a5ff | Radim Krčmář | 12 February 2015, 18:41:34 UTC | KVM: x86: simplify kvm_apic_map recalculate_apic_map() uses two passes over all VCPUs. This is a relic from time when we selected a global mode in the first pass and set up the optimized table in the second pass (to have a consistent mode). Recent changes made mixed mode unoptimized and we can do it in one pass. Format of logical MDA is a function of the mode, so we encode it in apic_logical_id() and drop obsoleted variables from the struct. Signed-off-by: Radim Krčmář <rkrcmar@redhat.com> Message-Id: <1423766494-26150-5-git-send-email-rkrcmar@redhat.com> [Add lid_bits temporary in apic_logical_id. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> | 08 April 2015, 08:47:01 UTC |
