https://github.com/openai/baselines
Revision c3bd8cea665afa8de6ac3eccc870e5952938c8de authored by Juliano Laganá on 24 October 2018, 17:00:31 UTC, committed by pzhokhov on 24 October 2018, 17:00:31 UTC
1 parent 84ea7aa
Tip revision: c3bd8cea665afa8de6ac3eccc870e5952938c8de authored by Juliano Laganá on 24 October 2018, 17:00:31 UTC
Adds description of param_noise parameter in deepq.learn method (#675)
Adds description of param_noise parameter in deepq.learn method (#675)
Tip revision: c3bd8ce
README.md
<img src="data/logo.jpg" width=25% align="right" /> [![Build status](https://travis-ci.org/openai/baselines.svg?branch=master)](https://travis-ci.org/openai/baselines)
# Baselines
OpenAI Baselines is a set of high-quality implementations of reinforcement learning algorithms.
These algorithms will make it easier for the research community to replicate, refine, and identify new ideas, and will create good baselines to build research on top of. Our DQN implementation and its variants are roughly on par with the scores in published papers. We expect they will be used as a base around which new ideas can be added, and as a tool for comparing a new approach against existing ones.
## Prerequisites
Baselines requires python3 (>=3.5) with the development headers. You'll also need system packages CMake, OpenMPI and zlib. Those can be installed as follows
### Ubuntu
```bash
sudo apt-get update && sudo apt-get install cmake libopenmpi-dev python3-dev zlib1g-dev
```
### Mac OS X
Installation of system packages on Mac requires [Homebrew](https://brew.sh). With Homebrew installed, run the following:
```bash
brew install cmake openmpi
```
## Virtual environment
From the general python package sanity perspective, it is a good idea to use virtual environments (virtualenvs) to make sure packages from different projects do not interfere with each other. You can install virtualenv (which is itself a pip package) via
```bash
pip install virtualenv
```
Virtualenvs are essentially folders that have copies of python executable and all python packages.
To create a virtualenv called venv with python3, one runs
```bash
virtualenv /path/to/venv --python=python3
```
To activate a virtualenv:
```
. /path/to/venv/bin/activate
```
More thorough tutorial on virtualenvs and options can be found [here](https://virtualenv.pypa.io/en/stable/)
## Installation
- Clone the repo and cd into it:
```bash
git clone https://github.com/openai/baselines.git
cd baselines
```
- If you don't have TensorFlow installed already, install your favourite flavor of TensorFlow. In most cases,
```bash
pip install tensorflow-gpu # if you have a CUDA-compatible gpu and proper drivers
```
or
```bash
pip install tensorflow
```
should be sufficient. Refer to [TensorFlow installation guide](https://www.tensorflow.org/install/)
for more details.
- Install baselines package
```bash
pip install -e .
```
### MuJoCo
Some of the baselines examples use [MuJoCo](http://www.mujoco.org) (multi-joint dynamics in contact) physics simulator, which is proprietary and requires binaries and a license (temporary 30-day license can be obtained from [www.mujoco.org](http://www.mujoco.org)). Instructions on setting up MuJoCo can be found [here](https://github.com/openai/mujoco-py)
## Testing the installation
All unit tests in baselines can be run using pytest runner:
```
pip install pytest
pytest
```
## Training models
Most of the algorithms in baselines repo are used as follows:
```bash
python -m baselines.run --alg=<name of the algorithm> --env=<environment_id> [additional arguments]
```
### Example 1. PPO with MuJoCo Humanoid
For instance, to train a fully-connected network controlling MuJoCo humanoid using PPO2 for 20M timesteps
```bash
python -m baselines.run --alg=ppo2 --env=Humanoid-v2 --network=mlp --num_timesteps=2e7
```
Note that for mujoco environments fully-connected network is default, so we can omit `--network=mlp`
The hyperparameters for both network and the learning algorithm can be controlled via the command line, for instance:
```bash
python -m baselines.run --alg=ppo2 --env=Humanoid-v2 --network=mlp --num_timesteps=2e7 --ent_coef=0.1 --num_hidden=32 --num_layers=3 --value_network=copy
```
will set entropy coefficient to 0.1, and construct fully connected network with 3 layers with 32 hidden units in each, and create a separate network for value function estimation (so that its parameters are not shared with the policy network, but the structure is the same)
See docstrings in [common/models.py](baselines/common/models.py) for description of network parameters for each type of model, and
docstring for [baselines/ppo2/ppo2.py/learn()](baselines/ppo2/ppo2.py#L152) for the description of the ppo2 hyperparamters.
### Example 2. DQN on Atari
DQN with Atari is at this point a classics of benchmarks. To run the baselines implementation of DQN on Atari Pong:
```
python -m baselines.run --alg=deepq --env=PongNoFrameskip-v4 --num_timesteps=1e6
```
## Saving, loading and visualizing models
The algorithms serialization API is not properly unified yet; however, there is a simple method to save / restore trained models.
`--save_path` and `--load_path` command-line option loads the tensorflow state from a given path before training, and saves it after the training, respectively.
Let's imagine you'd like to train ppo2 on Atari Pong, save the model and then later visualize what has it learnt.
```bash
python -m baselines.run --alg=ppo2 --env=PongNoFrameskip-v4 --num_timesteps=2e7 --save_path=~/models/pong_20M_ppo2
```
This should get to the mean reward per episode about 20. To load and visualize the model, we'll do the following - load the model, train it for 0 steps, and then visualize:
```bash
python -m baselines.run --alg=ppo2 --env=PongNoFrameskip-v4 --num_timesteps=0 --load_path=~/models/pong_20M_ppo2 --play
```
*NOTE:* At the moment Mujoco training uses VecNormalize wrapper for the environment which is not being saved correctly; so loading the models trained on Mujoco will not work well if the environment is recreated. If necessary, you can work around that by replacing RunningMeanStd by TfRunningMeanStd in [baselines/common/vec_env/vec_normalize.py](baselines/common/vec_env/vec_normalize.py#L12). This way, mean and std of environment normalizing wrapper will be saved in tensorflow variables and included in the model file; however, training is slower that way - hence not including it by default
## Using baselines with TensorBoard
Baselines logger can save data in the TensorBoard format. To do so, set environment variables `OPENAI_LOG_FORMAT` and `OPENAI_LOGDIR`:
```bash
export OPENAI_LOG_FORMAT='stdout,log,csv,tensorboard' # formats are comma-separated, but for tensorboard you only really need the last one
export OPENAI_LOGDIR=path/to/tensorboard/data
```
And you can now start TensorBoard with:
```bash
tensorboard --logdir=$OPENAI_LOGDIR
```
## Subpackages
- [A2C](baselines/a2c)
- [ACER](baselines/acer)
- [ACKTR](baselines/acktr)
- [DDPG](baselines/ddpg)
- [DQN](baselines/deepq)
- [GAIL](baselines/gail)
- [HER](baselines/her)
- [PPO1](baselines/ppo1) (obsolete version, left here temporarily)
- [PPO2](baselines/ppo2)
- [TRPO](baselines/trpo_mpi)
## Benchmarks
Results of benchmarks on Mujoco (1M timesteps) and Atari (10M timesteps) are available
[here for Mujoco](https://htmlpreview.github.com/?https://github.com/openai/baselines/blob/master/benchmarks_mujoco1M.htm)
and
[here for Atari](https://htmlpreview.github.com/?https://github.com/openai/baselines/blob/master/benchmarks_atari10M.htm)
respectively. Note that these results may be not on the latest version of the code, particular commit hash with which results were obtained is specified on the benchmarks page.
To cite this repository in publications:
@misc{baselines,
author = {Dhariwal, Prafulla and Hesse, Christopher and Klimov, Oleg and Nichol, Alex and Plappert, Matthias and Radford, Alec and Schulman, John and Sidor, Szymon and Wu, Yuhuai and Zhokhov, Peter},
title = {OpenAI Baselines},
year = {2017},
publisher = {GitHub},
journal = {GitHub repository},
howpublished = {\url{https://github.com/openai/baselines}},
}
![swh spinner](/static/img/swh-spinner.gif)
Computing file changes ...