Revision c6566206c6f9583b529d62f05fb67182978b959e authored by Jean Delvare on 17 October 2008, 15:51:18 UTC, committed by Jean Delvare on 17 October 2008, 15:51:18 UTC
The W83781D and W83782D can be accessed either on the I2C bus or the ISA bus. We must not access the same chip through both interfaces. So far we were relying on the user passing the correct ignore parameter to skip the registration of the I2C interface as suggested by sensors-detect, but this is fragile: the user may load the w83781d driver without running sensors-detect, and the i2c bus numbers are not stable across reboots and hardware changes. So, better detect alias chips in the driver directly, and skip any I2C chip which is obviously an alias of the ISA chip. This is done by comparing the value of 26 selected registers. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Wolfgang Grandegger <wg@grandegger.com>
1 parent 2fbbbf1
| File | Mode | Size |
|---|---|---|
| Documentation | ||
| arch | ||
| block | ||
| crypto | ||
| drivers | ||
| firmware | ||
| fs | ||
| include | ||
| init | ||
| ipc | ||
| kernel | ||
| lib | ||
| mm | ||
| net | ||
| samples | ||
| scripts | ||
| security | ||
| sound | ||
| usr | ||
| virt | ||
| .gitignore | -rw-r--r-- | 867 bytes |
| .mailmap | -rw-r--r-- | 3.7 KB |
| COPYING | -rw-r--r-- | 18.3 KB |
| CREDITS | -rw-r--r-- | 90.7 KB |
| Kbuild | -rw-r--r-- | 2.4 KB |
| MAINTAINERS | -rw-r--r-- | 101.2 KB |
| Makefile | -rw-r--r-- | 55.4 KB |
| README | -rw-r--r-- | 16.5 KB |
| REPORTING-BUGS | -rw-r--r-- | 3.1 KB |
Computing file changes ...
