Revision c7fa92979c5964966efa298bf2a40ff451ee7482 authored by Richard Levitte on 06 May 2020, 18:48:25 UTC, committed by Richard Levitte on 08 May 2020, 13:15:16 UTC
There were a few instances where we set the EVP_PKEY_CTX operation to EVP_PKEY_OP_UNDEFINED, but forgot to clean up first. After the operation is made undefined, there's no way to know what should be cleaned away, so that must be done first, in all spots. Reviewed-by: Shane Lontis <shane.lontis@oracle.com> (Merged from https://github.com/openssl/openssl/pull/11750)
1 parent 73d6b4e
descrip.mms.tmpl
## descrip.mms to build OpenSSL on OpenVMS
##
## {- join("\n## ", @autowarntext) -}
{-
use File::Spec::Functions qw/:DEFAULT abs2rel rel2abs/;
use File::Basename;
(our $osslprefix_q = platform->osslprefix()) =~ s/\$/\\\$/;
our $sover_dirname = platform->shlib_version_as_filename();
our $osslver = sprintf "%02d%02d", split(/\./, $config{version});
our $sourcedir = $config{sourcedir};
our $builddir = $config{builddir};
sub sourcefile {
catfile($sourcedir, @_);
}
sub buildfile {
catfile($builddir, @_);
}
sub sourcedir {
catdir($sourcedir, @_);
}
sub builddir {
catdir($builddir, @_);
}
sub tree {
(my $x = shift) =~ s|\]$|...]|;
$x
}
}
# Because we need to make two computations of these data,
# we store them in arrays for reuse
our @libs =
map { platform->staticname($_) }
@{$unified_info{libraries}};
our @shlibs =
map { platform->sharedname($_) // () }
@{$unified_info{libraries}};
our @install_libs =
map { platform->staticname($_) }
grep { !$unified_info{attributes}->{libraries}->{$_}->{noinst} }
@{$unified_info{libraries}};
our @install_shlibs =
map { platform->sharedname($_) // () }
grep { !$unified_info{attributes}->{libraries}->{$_}->{noinst} }
@{$unified_info{libraries}};
our @install_engines =
grep { !$unified_info{attributes}->{modules}->{$_}->{noinst}
&& $unified_info{attributes}->{modules}->{$_}->{engine} }
@{$unified_info{modules}};
our @install_modules =
grep { !$unified_info{attributes}->{modules}->{$_}->{noinst}
&& !$unified_info{attributes}->{modules}->{$_}->{engine} }
@{$unified_info{modules}};
our @install_programs =
grep { !$unified_info{attributes}->{programs}->{$_}->{noinst} }
@{$unified_info{programs}};
our @install_bin_scripts =
grep { !$unified_info{attributes}->{scripts}->{$_}->{noinst}
&& !$unified_info{attributes}->{scripts}->{$_}->{misc} }
@{$unified_info{scripts}};
our @install_misc_scripts =
grep { !$unified_info{attributes}->{scripts}->{$_}->{noinst}
&& $unified_info{attributes}->{scripts}->{$_}->{misc} }
@{$unified_info{scripts}};
# This is a horrible hack, but is needed because recursive inclusion of files
# in different directories does not work well with HP C.
my $sd = sourcedir("crypto", "async", "arch");
foreach (grep /\[\.crypto\.async\.arch\].*\.o$/, keys %{$unified_info{sources}}) {
my $obj = platform->obj($_);
$unified_info{before}->{$obj}
= qq(arch_include = F\$PARSE("$sd","A.;",,,"SYNTAX_ONLY") - "A.;"
define arch 'arch_include');
$unified_info{after}->{$obj}
= qq(deassign arch);
}
my $sd1 = sourcedir("ssl","record");
my $sd2 = sourcedir("ssl","statem");
my @ssl_locl_users = grep(/^\[\.(?:ssl\.(?:record|statem)|test)\].*\.o$/,
keys %{$unified_info{sources}});
foreach (@ssl_locl_users) {
my $obj = platform->obj($_);
$unified_info{before}->{$obj}
= qq(record_include = F\$PARSE("$sd1","A.;",,,"SYNTAX_ONLY") - "A.;"
define record 'record_include'
statem_include = F\$PARSE("$sd2","A.;",,,"SYNTAX_ONLY") - "A.;"
define statem 'statem_include');
$unified_info{after}->{$obj}
= qq(deassign statem
deassign record);
}
# This makes sure things get built in the order they need
# to. You're welcome.
sub dependmagic {
my $target = shift;
return "$target : build_generated\n\t\pipe \$(MMS) \$(MMSQUALIFIERS) depend && \$(MMS) \$(MMSQUALIFIERS) _$target\n_$target";
}
"";
-}
PLATFORM={- $config{target} -}
OPTIONS={- $config{options} -}
CONFIGURE_ARGS=({- join(", ",quotify_l(@{$config{perlargv}})) -})
SRCDIR={- $config{sourcedir} -}
BLDDIR={- $config{builddir} -}
# Allow both V and VERBOSE to indicate verbosity. This only applies
# to testing.
VERBOSE=$(V)
VERBOSE_FAILURE=$(VF)
VERSION={- "$config{full_version}" -}
MAJOR={- $config{major} -}
MINOR={- $config{minor} -}
SHLIB_VERSION_NUMBER={- $config{shlib_version} -}
SHLIB_TARGET={- $target{shared_target} -}
LIBS={- join(", ", map { "-\n\t".$_.".OLB" } @libs) -}
SHLIBS={- join(", ", map { "-\n\t".$_.".EXE" } @shlibs) -}
MODULES={- join(", ", map { "-\n\t".$_.".EXE" } @{$unified_info{modules}}) -}
PROGRAMS={- join(", ", map { "-\n\t".$_.".EXE" } @{$unified_info{programs}}) -}
SCRIPTS={- join(", ", map { "-\n\t".$_ } @{$unified_info{scripts}}) -}
{- output_off() if $disabled{makedepend}; "" -}
DEPS={- our @deps = map { platform->isobj($_) ? platform->dep($_) : $_ }
grep { $unified_info{sources}->{$_}->[0] =~ /\.c$/ }
keys %{$unified_info{sources}};
join(", ", map { "-\n\t".$_ } @deps); -}
{- output_on() if $disabled{makedepend}; "" -}
GENERATED_MANDATORY={- join(", ", map { "-\n\t".$_ } @{$unified_info{depends}->{""}} ) -}
GENERATED={- # common0.tmpl provides @generated
join(", ", map { platform->convertext($_) } @generated) -}
INSTALL_LIBS={- join(", ", map { "-\n\t".$_.".OLB" } @install_libs) -}
INSTALL_SHLIBS={- join(", ", map { "-\n\t".$_.".EXE" } @install_shlibs) -}
INSTALL_ENGINES={- join(", ", map { "-\n\t".$_.".EXE" } @install_engines) -}
INSTALL_MODULES={- join(", ", map { "-\n\t".$_.".EXE" } @install_modules) -}
INSTALL_PROGRAMS={- join(", ", map { "-\n\t".$_.".EXE" } @install_programs) -}
BIN_SCRIPTS={- join(", ", @install_bin_scripts) -}
MISC_SCRIPTS={- join(", ", @install_misc_scripts) -}
HTMLDOCS1={- join(", ", map { "-\n\t".$_ } @{$unified_info{htmldocs}->{man1}}) -}
HTMLDOCS3={- join(", ", map { "-\n\t".$_ } @{$unified_info{htmldocs}->{man3}}) -}
HTMLDOCS5={- join(", ", map { "-\n\t".$_ } @{$unified_info{htmldocs}->{man5}}) -}
HTMLDOCS7={- join(", ", map { "-\n\t".$_ } @{$unified_info{htmldocs}->{man7}}) -}
APPS_OPENSSL="{- use File::Spec::Functions;
catfile("apps","openssl") -}"
# DESTDIR is for package builders so that they can configure for, say,
# SYS$COMMON:[OPENSSL] and yet have everything installed in STAGING:[USER].
# In that case, configure with --prefix=SYS$COMMON:[OPENSSL] and then run
# MMS with /MACROS=(DESTDIR=STAGING:[USER]). The result will end up in
# STAGING:[USER.OPENSSL].
# Normally it is left empty.
DESTDIR=
# Do not edit this manually. Use Configure --prefix=DIR to change this!
INSTALLTOP={- our $installtop =
catdir($config{prefix}) || "SYS\$COMMON:[OPENSSL]";
$installtop -}
SYSTARTUP={- catdir($installtop, '[.SYS$STARTUP]'); -}
# This is the standard central area to store certificates, private keys...
OPENSSLDIR={- catdir($config{openssldir}) or
$config{prefix} ? catdir($config{prefix},"COMMON")
: "SYS\$COMMON:[OPENSSL-COMMON]" -}
# The same, but for C
OPENSSLDIR_C={- platform->osslprefix() -}DATAROOT:[000000]
# Where installed ENGINE modules reside, for C
ENGINESDIR_C={- platform->osslprefix() -}ENGINES{- $sover_dirname.$target{pointer_size} -}:
# Where modules reside, for C
MODULESDIR_C={- platform->osslprefix() -}MODULES{- $sover_dirname.$target{pointer_size} -}:
##### User defined commands and flags ################################
CC={- $config{CC} -}
CPP={- $config{CPP} -}
DEFINES={- our $defines1 = join('', map { ",$_" } @{$config{CPPDEFINES}}) -}
INCLUDES={- our $includes1 = join(',', @{$config{CPPINCLUDES}}) -}
CPPFLAGS={- our $cppflags1 = join('', @{$config{CPPFLAGS}}) -}
CFLAGS={- join('', @{$config{CFLAGS}}) -}
LDFLAGS={- join('', @{$config{LFLAGS}}) -}
EX_LIBS={- join('', map { ",$_" } @{$config{LDLIBS}}) -}
PERL={- $config{PERL} -}
AS={- $config{AS} -}
ASFLAGS={- join(' ', @{$config{ASFLAGS}}) -}
##### Special command flags ##########################################
ASOUTFLAG={- $target{asoutflag} -}$(OSSL_EMPTY)
##### Project flags ##################################################
# Variables starting with CNF_ are common variables for all product types
CNF_ASFLAGS={- join('', $target{asflags} || (),
@{$config{asflags}}) -}
CNF_DEFINES={- our $defines2 = join('', (map { ",$_" } @{$target{defines}},
@{$config{defines}}),
"'extradefines'") -}
CNF_INCLUDES={- our $includes2 = join(',', @{$target{includes}},
@{$config{includes}}) -}
CNF_CPPFLAGS={- our $cppflags2 = join('', $target{cppflags} || (),
@{$config{cppflags}}) -}
CNF_CFLAGS={- join('', $target{cflags} || (),
@{$config{cflags}}) -}
CNF_CXXFLAGS={- join('', $target{cxxflags} || (),
@{$config{cxxflags}}) -}
CNF_LDFLAGS={- join('', $target{lflags} || (),
@{$config{lflags}}) -}
CNF_EX_LIBS={- join('', map{ ",$_" } @{$target{ex_libs}},
@{$config{ex_libs}}) -}
# Variables starting with LIB_ are used to build library object files
# and shared libraries.
# Variables starting with DSO_ are used to build DSOs and their object files.
# Variables starting with BIN_ are used to build programs and their object
# files.
LIB_ASFLAGS={- join(' ', $target{lib_asflags} || (),
@{$config{lib_asflags}},
'$(CNF_ASFLAGS)', '$(ASFLAGS)') -}
LIB_DEFINES={- our $lib_defines =
join('', (map { ",$_" } @{$target{lib_defines}},
@{$target{shared_defines}},
@{$config{lib_defines}},
@{$config{shared_defines}}));
join('', $lib_defines,
(map { ",$_" } 'OPENSSLDIR="""$(OPENSSLDIR_C)"""',
'ENGINESDIR="""$(ENGINESDIR_C)"""',
'MODULESDIR="""$(MODULESDIR_C)"""'),
'$(CNF_DEFINES)', '$(DEFINES)') -}
LIB_INCLUDES={- our $lib_includes =
join(',', @{$target{lib_includes}},
@{$target{shared_includes}},
@{$config{lib_includes}},
@{$config{shared_includes}}) -}
LIB_CPPFLAGS={- our $lib_cppflags =
join('', $target{lib_cppflags} || (),
$target{shared_cppflags} || (),
@{$config{lib_cppflags}},
@{$config{shared_cppflag}});
join('', "'qual_includes'",
'/DEFINE=(__dummy$(LIB_DEFINES))',
$lib_cppflags,
'$(CNF_CPPFLAGS)', '$(CPPFLAGS)') -}
LIB_CFLAGS={- join('', $target{lib_cflags} || (),
$target{shared_cflag} || (),
@{$config{lib_cflags}},
@{$config{shared_cflag}},
'$(CNF_CFLAGS)', '$(CFLAGS)') -}
LIB_LDFLAGS={- join('', $target{lib_lflags} || (),
$target{shared_ldflag} || (),
@{$config{lib_lflags}},
@{$config{shared_ldflag}},
'$(CNF_LDFLAGS)', '$(LDFLAGS)') -}
LIB_EX_LIBS=$(CNF_EX_LIBS)$(EX_LIBS)
DSO_ASFLAGS={- join(' ', $target{dso_asflags} || (),
$target{module_asflags} || (),
@{$config{dso_asflags}},
@{$config{module_asflags}},
'$(CNF_ASFLAGS)', '$(ASFLAGS)') -}
DSO_DEFINES={- join('', (map { ",$_" } @{$target{dso_defines}},
@{$target{module_defines}},
@{$config{dso_defines}},
@{$config{module_defines}}),
'$(CNF_DEFINES)', '$(DEFINES)') -}
DSO_INCLUDES={- join(',', @{$target{dso_includes}},
@{$target{module_includes}},
@{$config{dso_includes}},
@{$config{module_includes}}) -}
DSO_CPPFLAGS={- join('', "'qual_includes'",
'/DEFINE=(__dummy$(DSO_DEFINES))',
$target{dso_cppflags} || (),
$target{module_cppflags} || (),
@{$config{dso_cppflags}},
@{$config{module_cppflags}},
'$(CNF_CPPFLAGS)', '$(CPPFLAGS)') -}
DSO_CFLAGS={- join('', $target{dso_cflags} || (),
$target{module_cflags} || (),
@{$config{dso_cflags}},
@{$config{module_cflags}},
'$(CNF_CFLAGS)', '$(CFLAGS)') -}
DSO_LDFLAGS={- join('', $target{dso_lflags} || (),
$target{module_ldflags} || (),
@{$config{dso_lflags}},
@{$config{module_ldflags}},
'$(CNF_LDFLAGS)', '$(LDFLAGS)') -}
DSO_EX_LIBS=$(CNF_EX_LIBS) $(EX_LIBS)
BIN_ASFLAGS={- join(' ', $target{bin_asflags} || (),
@{$config{bin_asflags}},
'$(CNF_ASFLAGS)', '$(ASFLAGS)') -}
BIN_DEFINES={- join('', (map { ",$_" } @{$target{bin_defines}},
@{$config{bin_defines}}),
'$(CNF_DEFINES)', '$(DEFINES)') -}
BIN_INCLUDES={- join(',', @{$target{bin_includes}},
@{$config{bin_includes}}) -}
BIN_CPPFLAGS={- join('', "'qual_includes'",
'/DEFINE=(__dummy$(DSO_DEFINES))',
$target{bin_cppflags} || (),
@{$config{bin_cppflag}},
'$(CNF_CPPFLAGS)', '$(CPPFLAGS)') -}
BIN_CFLAGS={- join('', $target{bin_cflags} || (),
@{$config{bin_cflags}},
'$(CNF_CFLAGS)', '$(CFLAGS)') -}
BIN_LDFLAGS={- join('', $target{bin_lflags} || (),
@{$config{bin_lflags}} || (),
'$(CNF_LDFLAGS)', '$(LDFLAGS)') -}
BIN_EX_LIBS=$(CNF_EX_LIBS) $(EX_LIBS)
NO_INST_LIB_CFLAGS={- join('', $target{no_inst_lib_cflags}
// $target{lib_cflags}
// (),
$target{shared_cflag} || (),
@{$config{lib_cflags}},
@{$config{shared_cflag}},
'$(CNF_CFLAGS)', '$(CFLAGS)') -}
NO_INST_DSO_CFLAGS={- join('', $target{no_inst_dso_cflags}
// $target{dso_cflags}
// (),
$target{no_inst_module_cflags}
// $target{module_cflags}
// (),
@{$config{dso_cflags}},
@{$config{module_cflags}},
'$(CNF_CFLAGS)', '$(CFLAGS)') -}
NO_INST_BIN_CFLAGS={- join('', $target{no_inst_bin_cflags}
// $target{bin_cflags}
// (),
@{$config{bin_cflags}},
'$(CNF_CFLAGS)', '$(CFLAGS)') -}
PERLASM_SCHEME={- $target{perlasm_scheme} -}
# CPPFLAGS_Q is used for one thing only: to build up buildinf.h
CPPFLAGS_Q={- (my $c = $lib_cppflags.$cppflags2.$cppflags1) =~ s|"|""|g;
(my $d = $lib_defines.$defines2.$defines1) =~ s|"|""|g;
my $i = join(',', $lib_includes || (), $includes2 || (),
$includes1 || ());
my $x = $c;
$x .= "/INCLUDE=($i)" if $i;
$x .= "/DEFINE=($d)" if $d;
$x; -}
# .FIRST and .LAST are special targets with MMS and MMK.
# The defines in there are for C. includes that look like
# this:
#
# #include <openssl/foo.h>
# #include "internal/bar.h"
#
# will use the logical names to find the files. Expecting
# DECompHP C to find files in subdirectories of whatever was
# given with /INCLUDE is a fantasy, unfortunately.
NODEBUG=@
.FIRST :
$(NODEBUG) sourcetop = F$PARSE("$(SRCDIR)","[]A.;",,"SYNTAX_ONLY,NO_CONCEAL") - ".][000000" - "[000000." - "][" - "]A.;" + ".]"
$(NODEBUG) DEFINE ossl_sourceroot 'sourcetop'
$(NODEBUG) !
$(NODEBUG) openssl_inc1 = F$PARSE("[.include.openssl]","A.;",,,"syntax_only") - "A.;"
$(NODEBUG) openssl_inc2 = F$PARSE("{- catdir($config{sourcedir},"[.include.openssl]") -}","A.;",,,"SYNTAX_ONLY") - "A.;"
$(NODEBUG) internal_inc1 = F$PARSE("[.crypto.include.internal]","A.;",,,"SYNTAX_ONLY") - "A.;"
$(NODEBUG) internal_inc2 = F$PARSE("{- catdir($config{sourcedir},"[.include.internal]") -}","A.;",,,"SYNTAX_ONLY") - "A.;"
$(NODEBUG) internal_inc3 = F$PARSE("{- catdir($config{sourcedir},"[.crypto.include.internal]") -}","A.;",,,"SYNTAX_ONLY") - "A.;"
$(NODEBUG) DEFINE openssl 'openssl_inc1','openssl_inc2'
$(NODEBUG) DEFINE internal 'internal_inc1','internal_inc2','internal_inc3'
$(NODEBUG) staging_dir = "$(DESTDIR)"
$(NODEBUG) staging_instdir = ""
$(NODEBUG) staging_datadir = ""
$(NODEBUG) IF staging_dir .NES. "" THEN -
staging_instdir = F$PARSE("A.;",staging_dir,"[]",,"SYNTAX_ONLY")
$(NODEBUG) IF staging_instdir - "]A.;" .NES. staging_instdir THEN -
staging_instdir = staging_instdir - "]A.;" + ".OPENSSL-INSTALL]"
$(NODEBUG) IF staging_instdir - "A.;" .NES. staging_instdir THEN -
staging_instdir = staging_instdir - "A.;" + "[OPENSSL-INSTALL]"
$(NODEBUG) IF staging_dir .NES. "" THEN -
staging_datadir = F$PARSE("A.;",staging_dir,"[]",,"SYNTAX_ONLY")
$(NODEBUG) IF staging_datadir - "]A.;" .NES. staging_datadir THEN -
staging_datadir = staging_datadir - "]A.;" + ".OPENSSL-COMMON]"
$(NODEBUG) IF staging_datadir - "A.;" .NES. staging_datadir THEN -
staging_datadir = staging_datadir - "A.;" + "[OPENSSL-COMMON]"
$(NODEBUG) !
$(NODEBUG) ! Installation logical names
$(NODEBUG) !
$(NODEBUG) installtop = F$PARSE(staging_instdir,"$(INSTALLTOP)","[]A.;",,"SYNTAX_ONLY,NO_CONCEAL") - ".][000000" - "[000000." - "][" - "]A.;" + ".]"
$(NODEBUG) datatop = F$PARSE(staging_datadir,"$(OPENSSLDIR)","[]A.;",,"SYNTAX_ONLY,NO_CONCEAL") - ".][000000" - "[000000." - "][" - "]A.;" + ".]"
$(NODEBUG) DEFINE ossl_installroot 'installtop'
$(NODEBUG) DEFINE ossl_dataroot 'datatop'
$(NODEBUG) !
$(NODEBUG) ! Figure out the architecture
$(NODEBUG) !
$(NODEBUG) arch = f$edit( f$getsyi( "arch_name"), "upcase")
$(NODEBUG) !
$(NODEBUG) ! Set up logical names for the libraries, so LINK and
$(NODEBUG) ! running programs can use them.
$(NODEBUG) !
$(NODEBUG) {- join("\n\t\$(NODEBUG) ", map { "DEFINE ".uc($_)." 'F\$ENV(\"DEFAULT\")'".uc($_)."\$(SHLIB_EXT)" } @shlibs) || "!" -}
.LAST :
$(NODEBUG) {- join("\n\t\$(NODEBUG) ", map { "DEASSIGN ".uc($_) } @shlibs) || "!" -}
$(NODEBUG) DEASSIGN ossl_dataroot
$(NODEBUG) DEASSIGN ossl_installroot
$(NODEBUG) DEASSIGN internal
$(NODEBUG) DEASSIGN openssl
.DEFAULT :
@ ! MMS cannot handle no actions...
# The main targets ###################################################
{- dependmagic('build_sw'); -} : build_libs_nodep, build_modules_nodep, build_programs_nodep copy-utils
{- dependmagic('build_libs'); -} : build_libs_nodep
{- dependmagic('build_modules'); -} : build_modules_nodep
{- dependmagic('build_programs'); -} : build_programs_nodep
build_generated : $(GENERATED_MANDATORY)
build_libs_nodep : $(LIBS), $(SHLIBS)
build_modules_nodep : $(MODULES)
build_programs_nodep : $(PROGRAMS), $(SCRIPTS)
build_docs: build_html_docs
build_html_docs: $(HTMLDOCS1) $(HTMLDOCS3) $(HTMLDOCS5) $(HTMLDOCS7)
# Kept around for backward compatibility
build_apps build_tests : build_programs
# Convenience target to prebuild all generated files, not just the mandatory
# ones
build_all_generated : $(GENERATED_MANDATORY) $(GENERATED) build_docs
@ ! {- output_off() if $disabled{makedepend}; "" -}
@ WRITE SYS$OUTPUT "Warning: consider configuring with no-makedepend, because if"
@ WRITE SYS$OUTPUT " target system doesn't have $(PERL),"
@ WRITE SYS$OUTPUT " then make will fail..."
@ ! {- output_on() if $disabled{makedepend}; "" -}
all : build_sw build_docs
test : tests
{- dependmagic('tests'); -} : build_programs_nodep, build_modules_nodep copy-utils
@ ! {- output_off() if $disabled{tests}; "" -}
DEFINE SRCTOP {- sourcedir() -}
DEFINE BLDTOP {- builddir() -}
IF "$(VERBOSE)" .NES. "" THEN DEFINE VERBOSE "$(VERBOSE)"
$(PERL) {- sourcefile("test", "run_tests.pl") -} $(TESTS)
DEASSIGN BLDTOP
DEASSIGN SRCTOP
@ ! {- if ($disabled{tests}) { output_on(); } else { output_off(); } "" -}
@ WRITE SYS$OUTPUT "Tests are not supported with your chosen Configure options"
@ ! {- output_on() if !$disabled{tests}; "" -}
list-tests :
@ ! {- output_off() if $disabled{tests}; "" -}
@ DEFINE SRCTOP {- sourcedir() -}
@ $(PERL) {- sourcefile("test", "run_tests.pl") -} list
@ DEASSIGN SRCTOP
@ ! {- if ($disabled{tests}) { output_on(); } else { output_off(); } "" -}
@ WRITE SYS$OUTPUT "Tests are not supported with your chosen Configure options"
@ ! {- output_on() if !$disabled{tests}; "" -}
install : install_sw install_ssldirs install_docs install_final
install_final :
@ WRITE SYS$OUTPUT ""
@ WRITE SYS$OUTPUT "######################################################################"
@ WRITE SYS$OUTPUT ""
@ IF "$(DESTDIR)" .EQS. "" THEN -
PIPE ( WRITE SYS$OUTPUT "Installation complete" ; -
WRITE SYS$OUTPUT "" ; -
WRITE SYS$OUTPUT "Run @$(SYSTARTUP)openssl_startup{- $osslver -} to set up logical names" ; -
WRITE SYS$OUTPUT "then run @$(SYSTARTUP)openssl_utils{- $osslver -} to define commands" ; -
WRITE SYS$OUTPUT "" )
@ IF "$(DESTDIR)" .NES. "" THEN -
PIPE ( WRITE SYS$OUTPUT "Staging installation complete" ; -
WRITE SYS$OUTPUT "" ; -
WRITE SYS$OUTPUT "Finish or package in such a way that the contents of the directory tree" ; -
WRITE SYS$OUTPUT staging_instdir ; -
WRITE SYS$OUTPUT "ends up in $(INSTALLTOP)," ; -
WRITE SYS$OUTPUT "and that the contents of the contents of the directory tree" ; -
WRITE SYS$OUTPUT staging_datadir ; -
WRITE SYS$OUTPUT "ends up in $(OPENSSLDIR)" ; -
WRITE SYS$OUTPUT "" ; -
WRITE SYS$OUTPUT "When in its final destination," ; -
WRITE SYS$OUTPUT "Run @$(SYSTARTUP)openssl_startup{- $osslver -} to set up logical names" ; -
WRITE SYS$OUTPUT "then run @$(SYSTARTUP)openssl_utils{- $osslver -} to define commands" ; -
WRITE SYS$OUTPUT "" )
check_install :
spawn/nolog @ossl_installroot:[SYSTEST]openssl_ivp{- $osslver -}.com
uninstall : uninstall_docs uninstall_sw
# Because VMS wants the generation number (or *) to delete files, we can't
# use $(LIBS), $(PROGRAMS), $(GENERATED) and $(MODULES) directly.
libclean :
{- join("\n\t", map { "- DELETE $_.OLB;*" } @libs) || "@ !" -}
{- join("\n\t", map { "- DELETE $_.EXE;*,$_.MAP;*" } @shlibs) || "@ !" -}
clean : libclean
{- join("\n\t", map { "- DELETE $_;*" } @{$unified_info{htmldocs}->{man1}}) || "@ !" -}
{- join("\n\t", map { "- DELETE $_;*" } @{$unified_info{htmldocs}->{man3}}) || "@ !" -}
{- join("\n\t", map { "- DELETE $_;*" } @{$unified_info{htmldocs}->{man5}}) || "@ !" -}
{- join("\n\t", map { "- DELETE $_;*" } @{$unified_info{htmldocs}->{man7}}) || "@ !" -}
{- join("\n\t", map { "- DELETE $_.EXE;*,$_.OPT;*" } @{$unified_info{programs}}) || "@ !" -}
{- join("\n\t", map { "- DELETE $_.EXE;*,$_.OPT;*" } @{$unified_info{modules}}) || "@ !" -}
{- join("\n\t", map { "- DELETE $_;*" } @{$unified_info{scripts}}) || "@ !" -}
{- join("\n\t", map { "- DELETE $_;*" } @{$unified_info{depends}->{""}}) || "@ !" -}
{- join("\n\t", map { "- DELETE $_;*" } @generated) || "@ !" -}
- DELETE [...]*.MAP;*
- DELETE [...]*.D;*
- DELETE [...]*.OBJ;*,*.LIS;*
- DELETE []CXX$DEMANGLER_DB.;*
- DELETE [.VMS]openssl_startup.com;*
- DELETE [.VMS]openssl_shutdown.com;*
- DELETE []vmsconfig.pm;*
distclean : clean
- DELETE configdata.pm;*
- DELETE descrip.mms;*
depend : descrip.mms
descrip.mms : FORCE
@ ! {- output_off() if $disabled{makedepend}; "" -}
@ $(PERL) {- sourcefile("util", "add-depends.pl") -} "VMS C"
@ ! {- output_on() if $disabled{makedepend}; "" -}
# Install helper targets #############################################
install_sw : install_dev install_engines install_modules -
install_runtime install_startup install_ivp
uninstall_sw : uninstall_dev uninstall_modules uninstall_engines -
uninstall_runtime uninstall_startup uninstall_ivp
install_docs : install_html_docs
uninstall_docs : uninstall_html_docs
install_ssldirs : check_INSTALLTOP
- CREATE/DIR/PROT=(S:RWED,O:RWE,G:RE,W:RE) OSSL_DATAROOT:[000000]
IF F$SEARCH("OSSL_DATAROOT:[000000]CERTS.DIR;1") .EQS. "" THEN -
CREATE/DIR/PROT=(S:RWED,O:RWE,G:RE,W:RE) OSSL_DATAROOT:[CERTS]
IF F$SEARCH("OSSL_DATAROOT:[000000]PRIVATE.DIR;1") .EQS. "" THEN -
CREATE/DIR/PROT=(S:RWED,O:RWE,G,W) OSSL_DATAROOT:[PRIVATE]
IF F$SEARCH("OSSL_DATAROOT:[000000]MISC.DIR;1") .EQS. "" THEN -
CREATE/DIR/PROT=(S:RWED,O:RWE,G,W) OSSL_DATAROOT:[MISC]
COPY/PROT=W:RE $(MISC_SCRIPTS) OSSL_DATAROOT:[MISC]
@ ! Install configuration file
COPY/PROT=W:R {- sourcefile("apps", "openssl-vms.cnf") -} -
ossl_dataroot:[000000]openssl.cnf-dist
IF F$SEARCH("OSSL_DATAROOT:[000000]openssl.cnf") .EQS. "" THEN -
COPY/PROT=W:R {- sourcefile("apps", "openssl-vms.cnf") -} -
ossl_dataroot:[000000]openssl.cnf
@ ! Install CTLOG configuration file
COPY/PROT=W:R {- sourcefile("apps", "ct_log_list.cnf") -} -
ossl_dataroot:[000000]ct_log_list.cnf-dist
IF F$SEARCH("OSSL_DATAROOT:[000000]ct_log_list.cnf") .EQS. "" THEN -
COPY/PROT=W:R {- sourcefile("apps", "ct_log_list.cnf") -} -
ossl_dataroot:[000000]ct_log_list.cnf
install_dev : check_INSTALLTOP install_runtime_libs
@ WRITE SYS$OUTPUT "*** Installing development files"
@ ! Install header files
- CREATE/DIR ossl_installroot:[include.openssl]
COPY/PROT=W:R openssl:*.h ossl_installroot:[include.openssl]
@ ! Install static (development) libraries
- CREATE/DIR ossl_installroot:[LIB.'arch']
{- join("\n ",
map { "COPY/PROT=W:R $_.OLB ossl_installroot:[LIB.'arch']" }
@install_libs) -}
install_engines : check_INSTALLTOP install_runtime_libs build_modules
@ {- output_off() unless scalar @install_engines; "" -} !
@ WRITE SYS$OUTPUT "*** Installing engines"
- CREATE/DIR ossl_installroot:[ENGINES{- $sover_dirname.$target{pointer_size} -}.'arch']
{- join("\n ",
map { "COPY/PROT=W:RE $_.EXE ossl_installroot:[ENGINES$sover_dirname$target{pointer_size}.'arch']" }
@install_engines) -}
@ {- output_on() unless scalar @install_engines; "" -} !
install_modules : check_INSTALLTOP install_runtime_libs build_modules
@ {- output_off() unless scalar @install_modules; "" -} !
@ WRITE SYS$OUTPUT "*** Installing modules"
- CREATE/DIR ossl_installroot:[MODULES{- $sover_dirname.$target{pointer_size} -}.'arch']
{- join("\n ",
map { "COPY/PROT=W:RE $_.EXE ossl_installroot:[MODULES$sover_dirname$target{pointer_size}.'arch']" }
@install_modules) -}
@ {- output_on() unless scalar @install_modules; "" -} !
install_runtime : install_programs
install_runtime_libs : check_INSTALLTOP build_libs
@ {- output_off() if $disabled{shared}; "" -} !
@ WRITE SYS$OUTPUT "*** Installing shareable images"
@ ! Install shared (runtime) libraries
- CREATE/DIR ossl_installroot:[LIB.'arch']
{- join("\n ",
map { "COPY/PROT=W:R $_.EXE ossl_installroot:[LIB.'arch']" }
@install_shlibs) -}
@ {- output_on() if $disabled{shared}; "" -} !
install_programs : check_INSTALLTOP install_runtime_libs build_programs
@ {- output_off() if $disabled{apps}; "" -} !
@ ! Install the main program
- CREATE/DIR ossl_installroot:[EXE.'arch']
COPY/PROT=W:RE [.APPS]openssl.EXE -
ossl_installroot:[EXE.'arch']openssl{- $osslver -}.EXE
@ ! Install scripts
COPY/PROT=W:RE $(BIN_SCRIPTS) ossl_installroot:[EXE]
@ ! {- output_on() if $disabled{apps}; "" -}
install_startup : [.VMS]openssl_startup.com [.VMS]openssl_shutdown.com -
[.VMS]openssl_utils.com, check_INSTALLTOP
- CREATE/DIR ossl_installroot:[SYS$STARTUP]
COPY/PROT=W:RE [.VMS]openssl_startup.com -
ossl_installroot:[SYS$STARTUP]openssl_startup{- $osslver -}.com
COPY/PROT=W:RE [.VMS]openssl_shutdown.com -
ossl_installroot:[SYS$STARTUP]openssl_shutdown{- $osslver -}.com
COPY/PROT=W:RE [.VMS]openssl_utils.com -
ossl_installroot:[SYS$STARTUP]openssl_utils{- $osslver -}.com
install_ivp : [.VMS]openssl_ivp.com check_INSTALLTOP
- CREATE/DIR ossl_installroot:[SYSTEST]
COPY/PROT=W:RE [.VMS]openssl_ivp.com -
ossl_installroot:[SYSTEST]openssl_ivp{- $osslver -}.com
[.VMS]openssl_startup.com : vmsconfig.pm {- sourcefile("VMS", "openssl_startup.com.in") -}
- CREATE/DIR [.VMS]
$(PERL) "-I." "-Mvmsconfig" {- sourcefile("util", "dofile.pl") -} -
{- sourcefile("VMS", "openssl_startup.com.in") -} -
> [.VMS]openssl_startup.com
[.VMS]openssl_utils.com : vmsconfig.pm {- sourcefile("VMS", "openssl_utils.com.in") -}
- CREATE/DIR [.VMS]
$(PERL) "-I." "-Mvmsconfig" {- sourcefile("util", "dofile.pl") -} -
{- sourcefile("VMS", "openssl_utils.com.in") -} -
> [.VMS]openssl_utils.com
[.VMS]openssl_shutdown.com : vmsconfig.pm {- sourcefile("VMS", "openssl_shutdown.com.in") -}
- CREATE/DIR [.VMS]
$(PERL) "-I." "-Mvmsconfig" {- sourcefile("util", "dofile.pl") -} -
{- sourcefile("VMS", "openssl_shutdown.com.in") -} -
> [.VMS]openssl_shutdown.com
[.VMS]openssl_ivp.com : vmsconfig.pm {- sourcefile("VMS", "openssl_ivp.com.in") -}
- CREATE/DIR [.VMS]
$(PERL) "-I." "-Mvmsconfig" {- sourcefile("util", "dofile.pl") -} -
{- sourcefile("VMS", "openssl_ivp.com.in") -} -
> [.VMS]openssl_ivp.com
vmsconfig.pm : configdata.pm
OPEN/WRITE/SHARE=READ CONFIG []vmsconfig.pm
WRITE CONFIG "package vmsconfig;"
WRITE CONFIG "use strict; use warnings;"
WRITE CONFIG "use Exporter;"
WRITE CONFIG "our @ISA = qw(Exporter);"
WRITE CONFIG "our @EXPORT = qw(%config %target %withargs %unified_info %disabled);"
WRITE CONFIG "our %config = ("
WRITE CONFIG " target => '","{- $config{target} -}","',"
WRITE CONFIG " version => '","{- $config{version} -}","',"
WRITE CONFIG " shlib_version => '","{- $config{shlib_version} -}","',"
WRITE CONFIG " shlib_major => '","{- $config{shlib_major} -}","',"
WRITE CONFIG " shlib_minor => '","{- $config{shlib_minor} -}","',"
WRITE CONFIG " no_shared => '","{- $disabled{shared} -}","',"
WRITE CONFIG " INSTALLTOP => '$(INSTALLTOP)',"
WRITE CONFIG " OPENSSLDIR => '$(OPENSSLDIR)',"
WRITE CONFIG " pointer_size => '","{- $target{pointer_size} -}","',"
WRITE CONFIG ");"
WRITE CONFIG "our %target = ();"
WRITE CONFIG "our %disabled = ();"
WRITE CONFIG "our %withargs = ();"
WRITE CONFIG "our %unified_info = ();"
WRITE CONFIG "1;"
CLOSE CONFIG
install_html_docs : check_INSTALLTOP build_html_docs
@ WRITE SYS$OUTPUT "*** Installing HTML docs"
- CREATE/DIR ossl_installroot:[HTML.MAN1]
- CREATE/DIR ossl_installroot:[HTML.MAN3]
- CREATE/DIR ossl_installroot:[HTML.MAN5]
- CREATE/DIR ossl_installroot:[HTML.MAN7]
{- join("\n ",
( map { "COPY/PROT=W:RE $_ ossl_installroot:[HTML.MAN1]" }
@{$unified_info{htmldocs}->{man1}} ),
( map { "COPY/PROT=W:RE $_ ossl_installroot:[HTML.MAN3]" }
@{$unified_info{htmldocs}->{man3}} ),
( map { "COPY/PROT=W:RE $_ ossl_installroot:[HTML.MAN5]" }
@{$unified_info{htmldocs}->{man5}} ),
( map { "COPY/PROT=W:RE $_ ossl_installroot:[HTML.MAN7]" }
@{$unified_info{htmldocs}->{man7}} )) -}
check_INSTALLTOP :
@ IF "$(INSTALLTOP)" .EQS. "" THEN -
WRITE SYS$ERROR "INSTALLTOP should not be empty"
@ IF "$(INSTALLTOP)" .EQS. "" THEN -
EXIT %x10000002
# Helper targets #####################################################
copy-utils : [.util]wrap.pl
[.util]wrap.pl : configdata.pm
@ IF "$(SRCDIR)" .NES. "$(BLDDIR)" THEN -
CREATE/DIR/LOG [.util]
@ IF "$(SRCDIR)" .NES. "$(BLDDIR)" THEN -
COPY/LOG ossl_sourceroot:[util]wrap.pl [.util]
# Developer targets ##################################################
debug_logicals :
SH LOGICAL/PROC openssl,internal,ossl_installroot,ossl_dataroot
# Building targets ###################################################
configdata.pm : $(SRCDIR)Configure $(SRCDIR)config.com {- join(" ", @{$config{build_file_templates}}, @{$config{build_infos}}, @{$config{conf_files}}) -}
perl configdata.pm -r
@ WRITE SYS$OUTPUT "*************************************************"
@ WRITE SYS$OUTPUT "*** ***"
@ WRITE SYS$OUTPUT "*** Please run the same mms command again ***"
@ WRITE SYS$OUTPUT "*** ***"
@ WRITE SYS$OUTPUT "*************************************************"
@ PIPE ( EXIT %X10000000 )
reconfigure reconf :
perl configdata.pm -r
{-
use File::Basename;
use File::Spec::Functions qw/abs2rel rel2abs catfile catdir/;
# Helper function to figure out dependencies on libraries
# It takes a list of library names and outputs a list of dependencies
sub compute_lib_depends {
# Depending on shared libraries:
# On Windows POSIX layers, we depend on {libname}.dll.a
# On Unix platforms, we depend on {shlibname}.so
return map {
{ lib => platform->sharedlib($_) // platform->staticlib($_),
attrs => $unified_info{attributes}->{libraries}->{$_} }
} @_;
}
# Helper function to deal with inclusion directory specs.
# We have to deal with two things:
# 1. comma separation and no possibility of trailing comma
# 2. no inclusion directories given at all
# 3. long compiler command lines
# To resolve 1, we need to iterate through the sources of inclusion
# directories, and only add a comma when needed.
# To resolve 2, we need to have a variable that will hold the whole
# inclusion qualifier, or be the empty string if there are no inclusion
# directories. That's the symbol 'qual_includes' that's used in CPPFLAGS
# To resolve 3, we creata a logical name TMP_INCLUDES: to hold the list
# of inclusion directories.
#
# This function returns a list of two lists, one being the collection of
# commands to execute before the compiler is called, and the other being
# the collection of commands to execute after. It takes as arguments the
# collection of strings to include as directory specs.
sub includes {
my @stuff = ( @_ );
my @before = (
'qual_includes :=',
);
my @after = (
'DELETE/SYMBOL/LOCAL qual_includes',
);
if (scalar @stuff > 0) {
push @before, 'tmp_includes := '.shift(@stuff);
while (@stuff) {
push @before, 'tmp_add := '.shift(@stuff);
push @before, 'IF tmp_includes .NES. "" .AND. tmp_add .NES. "" THEN tmp_includes = tmp_includes + ","';
push @before, 'tmp_includes = tmp_includes + tmp_add';
}
push @before, "IF tmp_includes .NES. \"\" THEN DEFINE tmp_includes 'tmp_includes'";
push @before, 'IF tmp_includes .NES. "" THEN qual_includes := /INCLUDE=(tmp_includes:)';
push @before, 'DELETE/SYMBOL/LOCAL tmp_includes';
push @before, 'DELETE/SYMBOL/LOCAL tmp_add';
push @after, 'DEASSIGN tmp_includes:'
}
return ([ @before ], [ @after ]);
}
sub generatesrc {
my %args = @_;
my $generator = join(" ", @{$args{generator}});
my $generator_incs = join("", map { ' "-I'.$_.'"' } @{$args{generator_incs}});
my $deps = join(", -\n\t\t", @{$args{generator_deps}}, @{$args{deps}});
if ($args{src} =~ /\.html$/) {
my $title = basename($args{src}, ".html");
my $pod = $args{generator}->[0];
my $mkpod2html = sourcefile('util', 'mkpod2html.pl');
return <<"EOF";
$args{src}: $pod
\$(PERL) $mkpod2html -i $pod -o \$\@ -t "$title" -r "\$(SRCDIR)/doc"
EOF
} elsif (platform->isdef($args{src})) {
my $target = platform->def($args{src});
my $mkdef = sourcefile('util', 'mkdef.pl');
my $ord_ver = $args{intent} eq 'lib' ? ' --version $(VERSION)' : '';
my $ord_name =
$args{generator}->[1] || basename($args{product}, '.EXE');
my $case_insensitive =
$target{$args{intent}.'_cflags'} =~ m|/NAMES=[^/]*AS_IS|i
? '' : ' --case-insensitive';
return <<"EOF";
$target : $args{generator}->[0] $deps $mkdef
\$(PERL) $mkdef$ord_ver --ordinals $args{generator}->[0] --name $ord_name "--OS" "VMS"$case_insensitive > $target
EOF
} elsif (!platform->isasm($args{src})) {
my $target = $args{src};
if ($args{generator}->[0] =~ m|^.*\.in$|) {
my $dofile = abs2rel(rel2abs(catfile($config{sourcedir},
"util", "dofile.pl")),
rel2abs($config{builddir}));
my @modules = ( 'configdata.pm',
grep { $_ =~ m|\.pm$| } @{$args{deps}} );
my %moduleincs = map { '"-I'.dirname($_).'"' => 1 } @modules;
@modules = map { '"-M'.basename($_, '.pm').'"' } @modules;
my $modules = join(' ', '', sort keys %moduleincs, @modules);
return <<"EOF";
$target : $args{generator}->[0] $deps
\$(PERL)$modules $dofile "-o$target{build_file}" $generator > \$\@
EOF
} else {
return <<"EOF";
$target : $args{generator}->[0] $deps
\$(PERL)$generator_incs $generator > \$\@
EOF
}
} else {
my $cppflags = {
shlib => '$(LIB_CFLAGS) $(LIB_CPPFLAGS)',
lib => '$(LIB_CFLAGS) $(LIB_CPPFLAGS)',
dso => '$(DSO_CFLAGS) $(DSO_CPPFLAGS)',
bin => '$(BIN_CFLAGS) $(BIN_CPPFLAGS)'
} -> {$args{intent}};
my @incs_cmds = includes({ shlib => '$(LIB_INCLUDES)',
lib => '$(LIB_INCLUDES)',
dso => '$(DSO_INCLUDES)',
bin => '$(BIN_INCLUDES)' } -> {$args{intent}},
'$(CNF_INCLUDES)',
'$(INCLUDES)',
@{$args{incs}});
my $incs_on = join("\n\t\@ ", @{$incs_cmds[0]}) || '!';
my $incs_off = join("\n\t\@ ", @{$incs_cmds[1]}) || '!';
my $defs = join("", map { ",".$_ } @{$args{defs}});
my $target = platform->asm($args{src});
if ($args{generator}->[0] =~ /\.pl$/) {
$generator = '$(PERL)'.$generator_incs.' '.$generator
.' '.$cppflags;
} elsif ($args{generator}->[0] =~ /\.S$/) {
$generator = undef;
} else {
die "Generator type for $src unknown: $generator\n";
}
if (defined($generator)) {
# If the target is named foo.S in build.info, we want to
# end up generating foo.s in two steps.
if ($args{src} =~ /\.S$/) {
return <<"EOF";
$target : $args{generator}->[0] $deps
$generator \$\@-S
\@ $incs_on
\@ extradefines = "$defs"
PIPE \$(CPP) $cppflags \$\@-S | -
\$(PERL) -ne "/^#(\\s*line)?\\s*[0-9]+\\s+""/ or print" > \$\@-i
\@ DELETE/SYMBOL/LOCAL extradefines
\@ $incs_off
RENAME \$\@-i \$\@
DELETE \$\@-S;
EOF
}
# Otherwise....
return <<"EOF";
$target : $args{generator}->[0] $deps
\@ $incs_on
\@ extradefines = "$defs"
$generator \$\@
\@ DELETE/SYMBOL/LOCAL extradefines
\@ $incs_off
EOF
}
return <<"EOF";
$target : $args{generator}->[0] $deps
\@ $incs_on
\@ extradefines = "$defs"
SHOW SYMBOL qual_includes
PIPE \$(CPP) $cppflags $args{generator}->[0] | -
\$(PERL) "-ne" "/^#(\\s*line)?\\s*[0-9]+\\s+""/ or print" > \$\@
\@ DELETE/SYMBOL/LOCAL extradefines
\@ $incs_off
EOF
}
}
sub src2obj {
my $asmext = platform->asmext();
my %args = @_;
my @srcs =
map { my $x = $_;
(platform->isasm($x) && grep { $x eq $_ } @generated)
? platform->asm($x) : $x }
( @{$args{srcs}} );
my $obj = platform->obj($args{obj});
my $dep = platform->dep($args{obj});
my $deps = join(", -\n\t\t", @srcs, @{$args{deps}});
# Because VMS C isn't very good at combining a /INCLUDE path with
# #includes having a relative directory (like '#include "../foo.h"),
# the best choice is to move to the first source file's intended
# directory before compiling, and make sure to write the object file
# in the correct position (important when the object tree is other
# than the source tree).
my $forward = dirname($args{srcs}->[0]);
my $backward = abs2rel(rel2abs("."), rel2abs($forward));
my $objd = abs2rel(rel2abs(dirname($obj)), rel2abs($forward));
my $objn = basename($obj);
my $depd = abs2rel(rel2abs(dirname($dep)), rel2abs($forward));
my $depn = basename($dep);
my $srcs =
join(", ", map { abs2rel(rel2abs($_), rel2abs($forward)) } @srcs);
my $before = $unified_info{before}->{$obj} || "\@ !";
my $after = $unified_info{after}->{$obj} || "\@ !";
my $cflags;
if ($args{attrs}->{noinst}) {
$cflags = { shlib => '$(NO_INST_LIB_CFLAGS)',
lib => '$(NO_INST_LIB_CFLAGS)',
dso => '$(NO_INST_DSO_CFLAGS)',
bin => '$(NO_INST_BIN_CFLAGS)' } -> {$args{intent}};
} else {
$cflags = { shlib => '$(LIB_CFLAGS)',
lib => '$(LIB_CFLAGS)',
dso => '$(DSO_CFLAGS)',
bin => '$(BIN_CFLAGS)' } -> {$args{intent}};
}
$cflags .= { shlib => '$(LIB_CPPFLAGS)',
lib => '$(LIB_CPPFLAGS)',
dso => '$(DSO_CPPFLAGS)',
bin => '$(BIN_CPPFLAGS)' } -> {$args{intent}};
my $defs = join("", map { ",".$_ } @{$args{defs}});
my $asflags = { shlib => ' $(LIB_ASFLAGS)',
lib => ' $(LIB_ASFLAGS)',
dso => ' $(DSO_ASFLAGS)',
bin => ' $(BIN_ASFLAGS)' } -> {$args{intent}};
my @incs_cmds = includes({ shlib => '$(LIB_INCLUDES)',
lib => '$(LIB_INCLUDES)',
dso => '$(DSO_INCLUDES)',
bin => '$(BIN_INCLUDES)' } -> {$args{intent}},
'$(INCLUDES)',
map {
file_name_is_absolute($_)
? $_ : catdir($backward,$_)
} @{$args{incs}});
my $incs_on = join("\n\t\@ ", @{$incs_cmds[0]}) || '!';
my $incs_off = join("\n\t\@ ", @{$incs_cmds[1]}) || '!';
if ($srcs[0] =~ /\Q${asmext}\E$/) {
return <<"EOF";
$obj : $deps
${before}
SET DEFAULT $forward
\$(AS) $asflags \$(ASOUTFLAG)${objd}${objn} $srcs
SET DEFAULT $backward
${after}
- PURGE $obj
EOF
} elsif ($srcs[0] =~ /.S$/) {
return <<"EOF";
$obj : $deps
${before}
SET DEFAULT $forward
\@ $incs_on
\@ extradefines = "$defs"
PIPE \$(CPP) ${cflags} $srcs | -
\$(PERL) -ne "/^#(\\s*line)?\\s*[0-9]+\\s+""/ or print" -
> ${objd}${objn}-asm
\@ DELETE/SYMBOL/LOCAL extradefines
\@ $incs_off
SET DEFAULT $backward
${after}
\$(AS) $asflags \$(ASOUTFLAG)$obj $obj-asm
- PURGE $obj
EOF
}
my $depbuild = $disabled{makedepend} ? ""
: " /MMS=(FILE=${depd}${depn},TARGET=$obj)";
return <<"EOF";
$obj : $deps
${before}
SET DEFAULT $forward
\@ $incs_on
\@ extradefines = "$defs"
\$(CC) ${cflags}${depbuild} /OBJECT=${objd}${objn} /REPOSITORY=$backward $srcs
\@ DELETE/SYMBOL/LOCAL extradefines
\@ $incs_off
SET DEFAULT $backward
${after}
- PURGE $obj
EOF
}
sub obj2shlib {
my %args = @_;
my $shlibname = platform->sharedname($args{lib});
my $shlib = platform->sharedlib($args{lib});
my @objs = map { platform->convertext($_) }
grep { platform->isobj($_) }
@{$args{objs}};
my @defs = map { platform->convertext($_) }
grep { platform->isdef($_) }
@{$args{objs}};
my @deps = compute_lib_depends(@{$args{deps}});
die "More than one symbol vector" if scalar @defs > 1;
my $deps = join(", -\n\t\t", @objs, @defs, map { $_->{lib} } @deps);
my $shlib_target = $disabled{shared} ? "" : $target{shared_target};
my $translatesyms_pl = abs2rel(rel2abs(catfile($config{sourcedir},
"VMS", "translatesyms.pl")),
rel2abs($config{builddir}));
# The "[]" hack is because in .OPT files, each line inherits the
# previous line's file spec as default, so if no directory spec
# is present in the current line and the previous line has one that
# doesn't apply, you're in for a surprise.
my $write_opt1 =
join(",-\"\n\t", map { my $x = $_ =~ /\[/ ? $_ : "[]".$_;
"WRITE OPT_FILE \"$x" } @objs).
"\"";
my $write_opt2 =
join("\n\t", map { my $x = $_->{lib} =~ /\[/
? $_->{lib} : "[]".$_->{lib};
$x =~ s|(\.EXE)|$1/SHARE|;
$x =~ s|(\.OLB)|$1/LIB|;
"WRITE OPT_FILE \"$x\"" } @deps)
|| "\@ !";
return <<"EOF"
$shlib : $deps
\$(PERL) $translatesyms_pl \$(BLDDIR)CXX\$DEMANGLER_DB. < $defs[0] > $defs[0]-translated
OPEN/WRITE/SHARE=READ OPT_FILE $shlibname-components.OPT
$write_opt1
$write_opt2
CLOSE OPT_FILE
LINK \$(LIB_LDFLAGS)/SHARE=\$\@ $defs[0]-translated/OPT,-
$shlibname-components.OPT/OPT \$(LIB_EX_LIBS)
DELETE $defs[0]-translated;*,$shlibname-components.OPT;*
PURGE $shlibname.EXE,$shlibname.MAP
EOF
. ($config{target} =~ m|alpha| ? "" : <<"EOF"
SET IMAGE/FLAGS=(NOCALL_DEBUG) \$\@
EOF
);
}
sub obj2dso {
my %args = @_;
my $dsoname = platform->dsoname($args{module});
my $dso = platform->dso($args{module});
my @objs = map { platform->convertext($_) }
grep { platform->isobj($_) }
@{$args{objs}};
my @defs = map { platform->convertext($_) }
grep { platform->isdef($_) }
@{$args{objs}};
my @deps = compute_lib_depends(@{$args{deps}});
my $deps = join(", -\n\t\t", @objs, @defs, map { $_->{lib} } @deps);
die "More than one symbol vector" if scalar @defs > 1;
my $shlib_target = $disabled{shared} ? "" : $target{shared_target};
# The "[]" hack is because in .OPT files, each line inherits the
# previous line's file spec as default, so if no directory spec
# is present in the current line and the previous line has one that
# doesn't apply, you're in for a surprise.
my $write_opt1 =
join(",-\"\n\t", map { my $x = $_ =~ /\[/ ? $_ : "[]".$_;
"WRITE OPT_FILE \"$x" } @objs).
"\"";
my $write_opt2 =
join("\n\t", map { my $x = $_->{lib} =~ /\[/
? $_->{lib} : "[]".$_->{lib};
$x =~ s|(\.EXE)|$1/SHARE|;
$x =~ s|(\.OLB)|$1/LIB|;
"WRITE OPT_FILE \"$x\"" } @deps)
|| "\@ !";
return <<"EOF"
$dso : $deps
OPEN/WRITE/SHARE=READ OPT_FILE $dsoname-components.OPT
$write_opt1
$write_opt2
CLOSE OPT_FILE
LINK \$(DSO_LDFLAGS)/SHARE=\$\@ $defs[0]/OPT,-
$dsoname-components.OPT/OPT \$(DSO_EX_LIBS)
- PURGE $dsoname.EXE,$dsoname.OPT,$dsoname.MAP
EOF
. ($config{target} =~ m|alpha| ? "" : <<"EOF"
SET IMAGE/FLAGS=(NOCALL_DEBUG) \$\@
EOF
);
}
sub obj2lib {
my %args = @_;
my $lib = platform->staticlib($args{lib});
my @objs = map { platform->convertext($_) }
grep { platform->isobj($_) }
@{$args{objs}};
my $objs = join(", -\n\t\t", @objs);
my $fill_lib = join("\n\t", (map { "LIBRARY/REPLACE $lib $_" } @objs));
return <<"EOF";
$lib : $objs
LIBRARY/CREATE/OBJECT $lib
$fill_lib
- PURGE $lib
EOF
}
sub obj2bin {
my %args = @_;
my $bin = platform->bin($args{bin});
my $binname = platform->binname($args{bin});
my @objs = map { platform->convertext($_) }
grep { platform->isobj($_) }
@{$args{objs}};
my $objs = join(",", @objs);
my @deps = compute_lib_depends(@{$args{deps}});
my $deps = join(", -\n\t\t", @objs, map { $_->{lib} } @deps);
my $olb_count = scalar grep(m|\.OLB$|, map { $_->{lib} } @deps);
my $analyse_objs = "@ !";
if ($olb_count > 0) {
my $analyse_quals =
$config{target} =~ m|alpha| ? "/GSD" : "/SECTIONS=SYMTAB";
$analyse_objs = "- pipe ANALYSE/OBJECT$analyse_quals $objs | SEARCH SYS\$INPUT \"\"\"main\"\"\" ; nomain = \$severity .NE. 1"
}
# The "[]" hack is because in .OPT files, each line inherits the
# previous line's file spec as default, so if no directory spec
# is present in the current line and the previous line has one that
# doesn't apply, you're in for a surprise.
my $write_opt1 =
join(",-\"\n\t", map { my $x = $_ =~ /\[/ ? $_ : "[]".$_;
"\@ WRITE OPT_FILE \"$x" } @objs).
"\"";
my $write_opt2 =
join("\n\t", "WRITE OPT_FILE \"CASE_SENSITIVE=YES\"",
map { my @lines = ();
use Data::Dumper;
my $x = $_->{lib} =~ /\[/
? $_->{lib} : "[]".$_->{lib};
if ($x =~ m|\.EXE$|) {
push @lines, "\@ WRITE OPT_FILE \"$x/SHARE\"";
} elsif ($x =~ m|\.OLB$|) {
# Special hack to include the MAIN object
# module explicitly. This will only be done
# if there isn't a 'main' in the program's
# object modules already.
my $main = $_->{attrs}->{has_main}
? '/INCLUDE=main' : '';
push @lines,
"\@ IF nomain THEN WRITE OPT_FILE \"$x/LIB$main\"",
"\@ IF .NOT. nomain THEN WRITE OPT_FILE \"$x/LIB\""
}
@lines
} @deps)
|| "\@ !";
# The linking commands looks a bit complex, but it's for good reason.
# When you link, say, foo.obj, bar.obj and libsomething.exe/share, and
# bar.obj happens to have a symbol that also exists in libsomething.exe,
# the linker will warn about it, loudly, and will then choose to pick
# the first copy encountered (the one in bar.obj in this example).
# On Unix and on Windows, the corresponding maneuvre goes through
# silently with the same effect.
# With some test programs, made for checking the internals of OpenSSL,
# we do this kind of linking deliberately, picking a few specific object
# files from within [.crypto] or [.ssl] so we can reach symbols that are
# otherwise unreachable (since the shareable images only exports the
# symbols listed in [.util]*.num), and then with the shared libraries
# themselves. So we need to silence the warning about multiply defined
# symbols, to mimic the way linking work on Unix and Windows, and so
# the build isn't interrupted (MMS stops when warnings are signaled,
# by default), and so someone building doesn't have to worry where it
# isn't necessary. If there are other warnings, however, we show them
# and let it break the build.
return <<"EOF"
$bin : $deps
$analyse_objs
@ OPEN/WRITE/SHARE=READ OPT_FILE $binname.OPT
$write_opt1
$write_opt2
@ CLOSE OPT_FILE
TYPE $binname.OPT ! For debugging
- pipe SPAWN/WAIT/NOLOG/OUT=$binname.LINKLOG -
LINK \$(BIN_LDFLAGS)/EXEC=\$\@ $binname.OPT/OPT \$(BIN_EX_LIBS) ; -
link_status = \$status ; link_severity = link_status .AND. 7
@ search_severity = 1
-@ IF link_severity .EQ. 0 THEN -
pipe SEARCH $binname.LINKLOG "%","-"/MATCH=AND | -
SPAWN/WAIT/NOLOG/OUT=NLA0: -
SEARCH SYS\$INPUT: "-W-MULDEF,"/MATCH=NOR ; -
search_severity = \$severity
@ ! search_severity is 3 when the last search didn't find any matching
@ ! string: %SEARCH-I-NOMATCHES, no strings matched
@ ! If that was the result, we pretend linking got through without
@ ! fault or warning.
@ IF search_severity .EQ. 3 THEN link_severity = 1
@ ! At this point, if link_severity shows that there was a fault
@ ! or warning, make sure to restore the linking status.
-@ IF .NOT. link_severity THEN TYPE $binname.LINKLOG
-@ DELETE $binname.LINKLOG;*
@ IF .NOT. link_severity THEN SPAWN/WAIT/NOLOG EXIT 'link_status'
- PURGE $bin,$binname.OPT
EOF
. ($config{target} =~ m|alpha| ? "" : <<"EOF"
SET IMAGE/FLAGS=(NOCALL_DEBUG) \$\@
EOF
);
}
sub in2script {
my %args = @_;
my $script = $args{script};
return "" if grep { $_ eq $script } @{$args{sources}}; # No overwrite!
my $sources = join(" ", @{$args{sources}});
my $dofile = abs2rel(rel2abs(catfile($config{sourcedir},
"util", "dofile.pl")),
rel2abs($config{builddir}));
return <<"EOF";
$script : $sources
\$(PERL) "-I\$(BLDDIR)" "-Mconfigdata" $dofile -
"-o$target{build_file}" $sources > $script
SET FILE/PROT=(S:RWED,O:RWED,G:RE,W:RE) $script
PURGE $script
EOF
}
"" # Important! This becomes part of the template result.
-}
Computing file changes ...
