Revision c7fa92979c5964966efa298bf2a40ff451ee7482 authored by Richard Levitte on 06 May 2020, 18:48:25 UTC, committed by Richard Levitte on 08 May 2020, 13:15:16 UTC
There were a few instances where we set the EVP_PKEY_CTX operation to EVP_PKEY_OP_UNDEFINED, but forgot to clean up first. After the operation is made undefined, there's no way to know what should be cleaned away, so that must be done first, in all spots. Reviewed-by: Shane Lontis <shane.lontis@oracle.com> (Merged from https://github.com/openssl/openssl/pull/11750)
1 parent 73d6b4e
unix-Makefile.tmpl
##
## Makefile for OpenSSL
##
## {- join("\n## ", @autowarntext) -}
{-
our $makedepprog = platform->makedepprog();
sub windowsdll { $config{target} =~ /^(?:Cygwin|mingw)/ }
# Shared AIX support is special. We put libcrypto[64].so.ver into
# libcrypto.a and use libcrypto_a.a as static one.
sub sharedaix { !$disabled{shared} && $config{target} =~ /^aix/ }
our $sover_dirname = platform->shlib_version_as_filename();
# This makes sure things get built in the order they need
# to. You're welcome.
sub dependmagic {
my $target = shift;
return "$target: build_generated\n\t\$(MAKE) depend && \$(MAKE) _$target\n_$target";
}
our $COLUMNS = $ENV{COLUMNS};
if ($COLUMNS =~ /^\d+$/) {
$COLUMNS = int($COLUMNS) - 2; # 2 to leave space for ending ' \'
} else {
$COLUMNS = 76;
}
sub fill_lines {
my $item_sep = shift; # string
my $line_length = shift; # number of chars
my @result = ();
my $resultpos = 0;
foreach (@_) {
my $fill_line = $result[$resultpos] // '';
my $newline =
($fill_line eq '' ? '' : $fill_line . $item_sep) . $_;
if (length($newline) > $line_length) {
# If this is a single item and the intended result line
# is empty, we put it there anyway
if ($fill_line eq '') {
$result[$resultpos++] = $newline;
} else {
$result[++$resultpos] = $_;
}
} else {
$result[$resultpos] = $newline;
}
}
return @result;
}
'';
-}
PLATFORM={- $config{target} -}
OPTIONS={- $config{options} -}
CONFIGURE_ARGS=({- join(", ",quotify_l(@{$config{perlargv}})) -})
SRCDIR={- $config{sourcedir} -}
BLDDIR={- $config{builddir} -}
VERSION={- "$config{full_version}" -}
MAJOR={- $config{major} -}
MINOR={- $config{minor} -}
SHLIB_VERSION_NUMBER={- $config{shlib_version} -}
SHLIB_TARGET={- $target{shared_target} -}
LIBS={- join(" \\\n" . ' ' x 5,
fill_lines(" ", $COLUMNS - 5,
map { platform->staticlib($_) // () }
@{$unified_info{libraries}})) -}
SHLIBS={- join(" \\\n" . ' ' x 7,
fill_lines(" ", $COLUMNS - 7,
map { platform->sharedlib($_) // () }
@{$unified_info{libraries}})) -}
SHLIB_INFO={- join(" \\\n" . ' ' x 11,
fill_lines(" ", $COLUMNS - 11,
map { my $x = platform->sharedlib($_);
my $y = platform->sharedlib_simple($_);
$x ? "\"$x;$y\"" : () }
@{$unified_info{libraries}})) -}
MODULES={- join(" \\\n" . ' ' x 8,
fill_lines(" ", $COLUMNS - 8,
map { platform->dso($_) }
@{$unified_info{modules}})) -}
PROGRAMS={- join(" \\\n" . ' ' x 9,
fill_lines(" ", $COLUMNS - 9,
map { platform->bin($_) }
@{$unified_info{programs}})) -}
SCRIPTS={- join(" \\\n" . ' ' x 8,
fill_lines(" ", $COLUMNS - 8, @{$unified_info{scripts}})) -}
{- output_off() if $disabled{makedepend}; "" -}
DEPS={- join(" \\\n" . ' ' x 5,
fill_lines(" ", $COLUMNS - 5,
map { platform->isobj($_) ? platform->dep($_) : () }
grep { $unified_info{sources}->{$_}->[0] =~ /\.c$/ }
keys %{$unified_info{sources}})); -}
{- output_on() if $disabled{makedepend}; "" -}
GENERATED_MANDATORY={- join(" \\\n" . ' ' x 20,
fill_lines(" ", $COLUMNS - 20,
@{$unified_info{depends}->{""}})) -}
GENERATED={- # common0.tmpl provides @generated
join(" \\\n" . ' ' x 5,
fill_lines(" ", $COLUMNS - 5,
map { platform->convertext($_) } @generated )) -}
INSTALL_LIBS={-
join(" \\\n" . ' ' x 13,
fill_lines(" ", $COLUMNS - 13,
map { platform->staticlib($_) // () }
grep { !$unified_info{attributes}->{libraries}->{$_}->{noinst} }
@{$unified_info{libraries}}))
-}
INSTALL_SHLIBS={-
join(" \\\n" . ' ' x 15,
fill_lines(" ", $COLUMNS - 15,
map { platform->sharedlib($_) // () }
grep { !$unified_info{attributes}->{libraries}->{$_}->{noinst} }
@{$unified_info{libraries}}))
-}
INSTALL_SHLIB_INFO={-
join(" \\\n" . ' ' x 19,
fill_lines(" ", $COLUMNS - 19,
map { my $x = platform->sharedlib($_);
my $y = platform->sharedlib_simple($_);
$x ? "\"$x;$y\"" : () }
grep { !$unified_info{attributes}->{libraries}->{$_}->{noinst} }
@{$unified_info{libraries}}))
-}
INSTALL_ENGINES={-
join(" \\\n" . ' ' x 16,
fill_lines(" ", $COLUMNS - 16,
map { platform->dso($_) }
grep { !$unified_info{attributes}->{modules}->{$_}->{noinst}
&& $unified_info{attributes}->{modules}->{$_}->{engine} }
@{$unified_info{modules}}))
-}
INSTALL_MODULES={-
join(" \\\n" . ' ' x 16,
fill_lines(" ", $COLUMNS - 16,
map { platform->dso($_) }
grep { !$unified_info{attributes}->{modules}->{$_}->{noinst}
&& !$unified_info{attributes}->{modules}->{$_}->{engine} }
@{$unified_info{modules}}))
-}
INSTALL_PROGRAMS={-
join(" \\\n" . ' ' x 16,
fill_lines(" ", $COLUMNS - 16, map { platform->bin($_) }
grep { !$unified_info{attributes}->{programs}->{$_}->{noinst} }
@{$unified_info{programs}}))
-}
BIN_SCRIPTS={-
join(" \\\n" . ' ' x 12,
fill_lines(" ", $COLUMNS - 12,
map { my $x = $unified_info{attributes}->{scripts}->{$_}->{linkname};
$x ? "$_:$x" : $_ }
grep { !$unified_info{attributes}->{scripts}->{$_}->{noinst}
&& !$unified_info{attributes}->{scripts}->{$_}->{misc} }
@{$unified_info{scripts}}))
-}
MISC_SCRIPTS={-
join(" \\\n" . ' ' x 13,
fill_lines(" ", $COLUMNS - 13,
map { my $x = $unified_info{attributes}->{scripts}->{$_}->{linkname};
$x ? "$_:$x" : $_ }
grep { !$unified_info{attributes}->{scripts}->{$_}->{noinst}
&& $unified_info{attributes}->{scripts}->{$_}->{misc} }
@{$unified_info{scripts}}))
-}
HTMLDOCS1={-
join(" \\\n" . ' ' x 10,
fill_lines(" ", $COLUMNS - 10, map { platform->bin($_) }
@{$unified_info{htmldocs}->{man1}})) -}
HTMLDOCS3={-
join(" \\\n" . ' ' x 10,
fill_lines(" ", $COLUMNS - 10, map { platform->bin($_) }
@{$unified_info{htmldocs}->{man3}})) -}
HTMLDOCS5={-
join(" \\\n" . ' ' x 10,
fill_lines(" ", $COLUMNS - 10, map { platform->bin($_) }
@{$unified_info{htmldocs}->{man5}})) -}
HTMLDOCS7={-
join(" \\\n" . ' ' x 10,
fill_lines(" ", $COLUMNS - 10, map { platform->bin($_) }
@{$unified_info{htmldocs}->{man7}})) -}
MANDOCS1={-
join(" \\\n" . ' ' x 9,
fill_lines(" ", $COLUMNS - 9, map { platform->bin($_) }
@{$unified_info{mandocs}->{man1}})) -}
MANDOCS3={-
join(" \\\n" . ' ' x 9,
fill_lines(" ", $COLUMNS - 9, map { platform->bin($_) }
@{$unified_info{mandocs}->{man3}})) -}
MANDOCS5={-
join(" \\\n" . ' ' x 9,
fill_lines(" ", $COLUMNS - 9, map { platform->bin($_) }
@{$unified_info{mandocs}->{man5}})) -}
MANDOCS7={-
join(" \\\n" . ' ' x 9,
fill_lines(" ", $COLUMNS - 9, map { platform->bin($_) }
@{$unified_info{mandocs}->{man7}})) -}
APPS_OPENSSL="{- use File::Spec::Functions;
catfile("apps","openssl") -}"
# DESTDIR is for package builders so that they can configure for, say,
# /usr/ and yet have everything installed to /tmp/somedir/usr/.
# Normally it is left empty.
DESTDIR=
# Do not edit these manually. Use Configure with --prefix or --openssldir
# to change this! Short explanation in the top comment in Configure
INSTALLTOP={- # $prefix is used in the OPENSSLDIR perl snippet
#
our $prefix = $config{prefix} || "/usr/local";
$prefix -}
OPENSSLDIR={- #
# The logic here is that if no --openssldir was given,
# OPENSSLDIR will get the value from $prefix plus "/ssl".
# If --openssldir was given and the value is an absolute
# path, OPENSSLDIR will get its value without change.
# If the value from --openssldir is a relative path,
# OPENSSLDIR will get $prefix with the --openssldir
# value appended as a subdirectory.
#
use File::Spec::Functions;
our $openssldir =
$config{openssldir} ?
(file_name_is_absolute($config{openssldir}) ?
$config{openssldir}
: catdir($prefix, $config{openssldir}))
: catdir($prefix, "ssl");
$openssldir -}
LIBDIR={- our $libdir = $config{libdir};
unless ($libdir) {
#
# if $prefix/lib$target{multilib} is not an existing
# directory, then assume that it's not searched by linker
# automatically, in which case adding $target{multilib} suffix
# causes more grief than we're ready to tolerate, so don't...
our $multilib =
-d "$prefix/lib$target{multilib}" ? $target{multilib} : "";
$libdir = "lib$multilib";
}
file_name_is_absolute($libdir) ? "" : $libdir -}
# $(libdir) is chosen to be compatible with the GNU coding standards
libdir={- file_name_is_absolute($libdir)
? $libdir : '$(INSTALLTOP)/$(LIBDIR)' -}
ENGINESDIR=$(libdir)/engines-{- $sover_dirname -}
MODULESDIR=$(libdir)/ossl-modules
# Convenience variable for those who want to set the rpath in shared
# libraries and applications
LIBRPATH=$(libdir)
MANDIR=$(INSTALLTOP)/share/man
DOCDIR=$(INSTALLTOP)/share/doc/$(BASENAME)
HTMLDIR=$(DOCDIR)/html
# MANSUFFIX is for the benefit of anyone who may want to have a suffix
# appended after the manpage file section number. "ssl" is popular,
# resulting in files such as config.5ssl rather than config.5.
MANSUFFIX=
HTMLSUFFIX=html
# For "optional" echo messages, to get "real" silence
ECHO = echo
##### User defined commands and flags ################################
# We let the C compiler driver to take care of .s files. This is done in
# order to be excused from maintaining a separate set of architecture
# dependent assembler flags. E.g. if you throw -mcpu=ultrasparc at SPARC
# gcc, then the driver will automatically translate it to -xarch=v8plus
# and pass it down to assembler. In any case, we do not define AS or
# ASFLAGS for this reason.
CROSS_COMPILE={- $config{CROSS_COMPILE} -}
CC=$(CROSS_COMPILE){- $config{CC} -}
CXX={- $config{CXX} ? "\$(CROSS_COMPILE)$config{CXX}" : '' -}
CPPFLAGS={- our $cppflags1 = join(" ",
(map { "-D".$_} @{$config{CPPDEFINES}}),
(map { "-I".$_} @{$config{CPPINCLUDES}}),
@{$config{CPPFLAGS}}) -}
CFLAGS={- join(' ', @{$config{CFLAGS}}) -}
CXXFLAGS={- join(' ', @{$config{CXXFLAGS}}) -}
LDFLAGS= {- join(' ', @{$config{LDFLAGS}}) -}
EX_LIBS= {- join(' ', @{$config{LDLIBS}}) -}
MAKEDEPEND={- $config{makedepprog} -}
PERL={- $config{PERL} -}
AR=$(CROSS_COMPILE){- $config{AR} -}
ARFLAGS= {- join(' ', @{$config{ARFLAGS}}) -}
RANLIB={- $config{RANLIB} ? "\$(CROSS_COMPILE)$config{RANLIB}" : "true"; -}
RC= $(CROSS_COMPILE){- $config{RC} -}
RCFLAGS={- join(' ', @{$config{RCFLAGS}}) -} {- $target{shared_rcflag} -}
RM= rm -f
RMDIR= rmdir
TAR= {- $target{TAR} || "tar" -}
TARFLAGS= {- $target{TARFLAGS} -}
BASENAME= openssl
NAME= $(BASENAME)-$(VERSION)
# Relative to $(SRCDIR)
TARFILE= ../$(NAME).tar
##### Project flags ##################################################
# Variables starting with CNF_ are common variables for all product types
CNF_CPPFLAGS={- our $cppflags2 =
join(' ', $target{cppflags} || (),
(map { "-D".$_} @{$target{defines}},
@{$config{defines}}),
(map { "-I".$_} @{$target{includes}},
@{$config{includes}}),
@{$config{cppflags}}) -}
CNF_CFLAGS={- join(' ', $target{cflags} || (),
@{$config{cflags}}) -}
CNF_CXXFLAGS={- join(' ', $target{cxxflags} || (),
@{$config{cxxflags}}) -}
CNF_LDFLAGS={- join(' ', $target{lflags} || (),
@{$config{lflags}}) -}
CNF_EX_LIBS={- join(' ', $target{ex_libs} || (),
@{$config{ex_libs}}) -}
# Variables starting with LIB_ are used to build library object files
# and shared libraries.
# Variables starting with DSO_ are used to build DSOs and their object files.
# Variables starting with BIN_ are used to build programs and their object
# files.
LIB_CPPFLAGS={- our $lib_cppflags =
join(' ', $target{lib_cppflags} || (),
$target{shared_cppflag} || (),
(map { '-D'.$_ }
@{$target{lib_defines} || ()},
@{$target{shared_defines} || ()},
@{$config{lib_defines} || ()},
@{$config{shared_defines} || ()}),
(map { '-I'.quotify1($_) }
@{$target{lib_includes}},
@{$target{shared_includes}},
@{$config{lib_includes}},
@{$config{shared_includes}}),
@{$config{lib_cppflags}},
@{$config{shared_cppflag}});
join(' ', $lib_cppflags,
(map { '-D'.$_ }
'OPENSSLDIR="\"$(OPENSSLDIR)\""',
'ENGINESDIR="\"$(ENGINESDIR)\""',
'MODULESDIR="\"$(MODULESDIR)\""'),
'$(CNF_CPPFLAGS)', '$(CPPFLAGS)') -}
LIB_CFLAGS={- join(' ', $target{lib_cflags} || (),
$target{shared_cflag} || (),
@{$config{lib_cflags}},
@{$config{shared_cflag}},
'$(CNF_CFLAGS)', '$(CFLAGS)') -}
LIB_CXXFLAGS={- join(' ', $target{lib_cxxflags} || (),
$target{shared_cxxflag} || (),
@{$config{lib_cxxflags}},
@{$config{shared_cxxflag}},
'$(CNF_CXXFLAGS)', '$(CXXFLAGS)') -}
LIB_LDFLAGS={- join(' ', $target{shared_ldflag} || (),
$config{shared_ldflag} || (),
'$(CNF_LDFLAGS)', '$(LDFLAGS)') -}
LIB_EX_LIBS=$(CNF_EX_LIBS) $(EX_LIBS)
DSO_CPPFLAGS={- join(' ', $target{dso_cppflags} || (),
$target{module_cppflags} || (),
(map { '-D'.$_ }
@{$target{dso_defines}},
@{$target{module_defines}},
@{$config{dso_defines} || ()},
@{$config{module_defines} || ()}),
(map { '-I'.quotify1($_) }
@{$target{dso_includes}},
@{$target{module_includes}},
@{$config{dso_includes}},
@{$config{module_includes}}),
@{$config{dso_cppflags}},
@{$config{module_cppflags}},
'$(CNF_CPPFLAGS)', '$(CPPFLAGS)') -}
DSO_CFLAGS={- join(' ', $target{dso_cflags} || (),
$target{module_cflags} || (),
@{$config{dso_cflags}},
@{$config{module_cflags}},
'$(CNF_CFLAGS)', '$(CFLAGS)') -}
DSO_CXXFLAGS={- join(' ', $target{dso_cxxflags} || (),
$target{module_cxxflags} || (),
@{$config{dso_cxxflags}},
@{$config{module_cxxflag}},
'$(CNF_CXXFLAGS)', '$(CXXFLAGS)') -}
DSO_LDFLAGS={- join(' ', $target{dso_ldflags} || (),
$target{module_ldflags} || (),
@{$config{dso_ldflags}},
@{$config{module_ldflags}},
'$(CNF_LDFLAGS)', '$(LDFLAGS)') -}
DSO_EX_LIBS=$(CNF_EX_LIBS) $(EX_LIBS)
BIN_CPPFLAGS={- join(' ', $target{bin_cppflags} || (),
(map { '-D'.$_ } @{$config{bin_defines} || ()}),
@{$config{bin_cppflags}},
'$(CNF_CPPFLAGS)', '$(CPPFLAGS)') -}
BIN_CFLAGS={- join(' ', $target{bin_cflags} || (),
@{$config{bin_cflags}},
'$(CNF_CFLAGS)', '$(CFLAGS)') -}
BIN_CXXFLAGS={- join(' ', $target{bin_cxxflags} || (),
@{$config{bin_cxxflags}},
'$(CNF_CXXFLAGS)', '$(CXXFLAGS)') -}
BIN_LDFLAGS={- join(' ', $target{bin_lflags} || (),
@{$config{bin_lflags}},
'$(CNF_LDFLAGS)', '$(LDFLAGS)') -}
BIN_EX_LIBS=$(CNF_EX_LIBS) $(EX_LIBS)
# CPPFLAGS_Q is used for one thing only: to build up buildinf.h
CPPFLAGS_Q={- $cppflags1 =~ s|([\\"])|\\$1|g;
$cppflags2 =~ s|([\\"])|\\$1|g;
$lib_cppflags =~ s|([\\"])|\\$1|g;
join(' ', $lib_cppflags || (), $cppflags2 || (),
$cppflags1 || ()) -}
PERLASM_SCHEME= {- $target{perlasm_scheme} -}
# For x86 assembler: Set PROCESSOR to 386 if you want to support
# the 80386.
PROCESSOR= {- $config{processor} -}
# We want error [and other] messages in English. Trouble is that make(1)
# doesn't pass macros down as environment variables unless there already
# was corresponding variable originally set. In other words we can only
# reassign environment variables, but not set new ones, not in portable
# manner that is. That's why we reassign several, just to be sure...
LC_ALL=C
LC_MESSAGES=C
LANG=C
# The main targets ###################################################
{- dependmagic('build_sw'); -}: build_libs_nodep build_modules_nodep build_programs_nodep link-utils
{- dependmagic('build_libs'); -}: build_libs_nodep
{- dependmagic('build_modules'); -}: build_modules_nodep
{- dependmagic('build_programs'); -}: build_programs_nodep
build_docs: build_man_docs build_html_docs
build_man_docs: $(MANDOCS1) $(MANDOCS3) $(MANDOCS5) $(MANDOCS7)
build_html_docs: $(HTMLDOCS1) $(HTMLDOCS3) $(HTMLDOCS5) $(HTMLDOCS7)
build_generated: $(GENERATED_MANDATORY)
build_libs_nodep: libcrypto.pc libssl.pc openssl.pc
build_modules_nodep: $(MODULES)
build_programs_nodep: $(PROGRAMS) $(SCRIPTS)
# Kept around for backward compatibility
build_apps build_tests: build_programs
# Convenience target to prebuild all generated files, not just the mandatory
# ones
build_all_generated: $(GENERATED_MANDATORY) $(GENERATED) build_docs
@ : {- output_off() if $disabled{makedepend}; "" -}
@echo "Warning: consider configuring with no-makedepend, because if"
@echo " target system doesn't have $(PERL),"
@echo " then make will fail..."
@ : {- output_on() if $disabled{makedepend}; "" -}
all: build_sw build_docs
test: tests
{- dependmagic('tests'); -}: build_programs_nodep build_modules_nodep link-utils
@ : {- output_off() if $disabled{tests}; "" -}
( SRCTOP=$(SRCDIR) \
BLDTOP=$(BLDDIR) \
PERL="$(PERL)" \
EXE_EXT={- platform->binext() -} \
$(PERL) $(SRCDIR)/test/run_tests.pl $(TESTS) )
@ : {- if ($disabled{tests}) { output_on(); } else { output_off(); } "" -}
@echo "Tests are not supported with your chosen Configure options"
@ : {- output_on() if !$disabled{tests}; "" -}
list-tests:
@ : {- output_off() if $disabled{tests}; "" -}
@SRCTOP="$(SRCDIR)" \
$(PERL) $(SRCDIR)/test/run_tests.pl list
@ : {- if ($disabled{tests}) { output_on(); } else { output_off(); } "" -}
@echo "Tests are not supported with your chosen Configure options"
@ : {- output_on() if !$disabled{tests}; "" -}
install: install_sw install_ssldirs install_docs
uninstall: uninstall_docs uninstall_sw
libclean:
@set -e; for s in $(SHLIB_INFO); do \
if [ "$$s" = ";" ]; then continue; fi; \
s1=`echo "$$s" | cut -f1 -d";"`; \
s2=`echo "$$s" | cut -f2 -d";"`; \
$(ECHO) $(RM) $$s1; {- output_off() unless windowsdll(); "" -}\
$(RM) apps/$$s1; \
$(RM) test/$$s1; \
$(RM) fuzz/$$s1; {- output_on() unless windowsdll(); "" -}\
$(RM) $$s1; \
if [ "$$s1" != "$$s2" ]; then \
$(ECHO) $(RM) $$s2; \
$(RM) $$s2; \
fi; \
done
$(RM) $(LIBS)
$(RM) *{- platform->defext() -}
clean: libclean
$(RM) $(HTMLDOCS1) $(HTMLDOCS3) $(HTMLDOCS5) $(HTMLDOCS7)
$(RM) $(MANDOCS1) $(MANDOCS3) $(MANDOCS5) $(MANDOCS7)
$(RM) $(PROGRAMS) $(TESTPROGS) $(MODULES) $(SCRIPTS)
$(RM) $(GENERATED_MANDATORY) $(GENERATED)
-$(RM) `find . -name '*{- platform->depext() -}' \! -name '.*' \! -type d -print`
-$(RM) `find . -name '*{- platform->objext() -}' \! -name '.*' \! -type d -print`
$(RM) core
$(RM) tags TAGS doc-nits cmd-nits
$(RM) -r test/test-runs
$(RM) openssl.pc libcrypto.pc libssl.pc
-$(RM) `find . -type l \! -name '.*' -print`
$(RM) $(TARFILE)
distclean: clean
$(RM) configdata.pm
$(RM) Makefile
# We check if any depfile is newer than Makefile and decide to
# concatenate only if that is true.
depend:
@: {- output_off() if $disabled{makedepend}; "" -}
@$(PERL) $(SRCDIR)/util/add-depends.pl {-
defined $makedepprog && $makedepprog =~ /\/makedepend/
? 'makedepend' : 'gcc' -}
@: {- output_on() if $disabled{makedepend}; "" -}
# Install helper targets #############################################
install_sw: install_dev install_engines install_modules install_runtime
uninstall_sw: uninstall_runtime uninstall_modules uninstall_engines uninstall_dev
install_docs: install_man_docs install_html_docs
uninstall_docs: uninstall_man_docs uninstall_html_docs
$(RM) -r $(DESTDIR)$(DOCDIR)
install_ssldirs:
@$(PERL) $(SRCDIR)/util/mkdir-p.pl $(DESTDIR)$(OPENSSLDIR)/certs
@$(PERL) $(SRCDIR)/util/mkdir-p.pl $(DESTDIR)$(OPENSSLDIR)/private
@$(PERL) $(SRCDIR)/util/mkdir-p.pl $(DESTDIR)$(OPENSSLDIR)/misc
@set -e; for x in dummy $(MISC_SCRIPTS); do \
if [ "$$x" = "dummy" ]; then continue; fi; \
x1=`echo "$$x" | cut -f1 -d:`; \
x2=`echo "$$x" | cut -f2 -d:`; \
fn=`basename $$x1`; \
$(ECHO) "install $$x1 -> $(DESTDIR)$(OPENSSLDIR)/misc/$$fn"; \
cp $$x1 $(DESTDIR)$(OPENSSLDIR)/misc/$$fn.new; \
chmod 755 $(DESTDIR)$(OPENSSLDIR)/misc/$$fn.new; \
mv -f $(DESTDIR)$(OPENSSLDIR)/misc/$$fn.new \
$(DESTDIR)$(OPENSSLDIR)/misc/$$fn; \
if [ "$$x1" != "$$x2" ]; then \
ln=`basename "$$x2"`; \
: {- output_off() unless windowsdll(); "" -}; \
$(ECHO) "copy $(DESTDIR)$(OPENSSLDIR)/misc/$$ln -> $(DESTDIR)$(OPENSSLDIR)/misc/$$fn"; \
cp $(DESTDIR)$(OPENSSLDIR)/misc/$$fn $(DESTDIR)$(OPENSSLDIR)/misc/$$ln; \
: {- output_on() unless windowsdll();
output_off() if windowsdll(); "" -}; \
$(ECHO) "link $(DESTDIR)$(OPENSSLDIR)/misc/$$ln -> $(DESTDIR)$(OPENSSLDIR)/misc/$$fn"; \
ln -sf $$fn $(DESTDIR)$(OPENSSLDIR)/misc/$$ln; \
: {- output_on() if windowsdll(); "" -}; \
fi; \
done
@$(ECHO) "install $(SRCDIR)/apps/openssl.cnf -> $(DESTDIR)$(OPENSSLDIR)/openssl.cnf.dist"
@cp $(SRCDIR)/apps/openssl.cnf $(DESTDIR)$(OPENSSLDIR)/openssl.cnf.new
@chmod 644 $(DESTDIR)$(OPENSSLDIR)/openssl.cnf.new
@mv -f $(DESTDIR)$(OPENSSLDIR)/openssl.cnf.new $(DESTDIR)$(OPENSSLDIR)/openssl.cnf.dist
@if [ ! -f "$(DESTDIR)$(OPENSSLDIR)/openssl.cnf" ]; then \
$(ECHO) "install $(SRCDIR)/apps/openssl.cnf -> $(DESTDIR)$(OPENSSLDIR)/openssl.cnf"; \
cp $(SRCDIR)/apps/openssl.cnf $(DESTDIR)$(OPENSSLDIR)/openssl.cnf; \
chmod 644 $(DESTDIR)$(OPENSSLDIR)/openssl.cnf; \
fi
@$(ECHO) "install $(SRCDIR)/apps/ct_log_list.cnf -> $(DESTDIR)$(OPENSSLDIR)/ct_log_list.cnf.dist"
@cp $(SRCDIR)/apps/ct_log_list.cnf $(DESTDIR)$(OPENSSLDIR)/ct_log_list.cnf.new
@chmod 644 $(DESTDIR)$(OPENSSLDIR)/ct_log_list.cnf.new
@mv -f $(DESTDIR)$(OPENSSLDIR)/ct_log_list.cnf.new $(DESTDIR)$(OPENSSLDIR)/ct_log_list.cnf.dist
@if [ ! -f "$(DESTDIR)$(OPENSSLDIR)/ct_log_list.cnf" ]; then \
$(ECHO) "install $(SRCDIR)/apps/ct_log_list.cnf -> $(DESTDIR)$(OPENSSLDIR)/ct_log_list.cnf"; \
cp $(SRCDIR)/apps/ct_log_list.cnf $(DESTDIR)$(OPENSSLDIR)/ct_log_list.cnf; \
chmod 644 $(DESTDIR)$(OPENSSLDIR)/ct_log_list.cnf; \
fi
install_dev: install_runtime_libs
@[ -n "$(INSTALLTOP)" ] || (echo INSTALLTOP should not be empty; exit 1)
@$(ECHO) "*** Installing development files"
@$(PERL) $(SRCDIR)/util/mkdir-p.pl $(DESTDIR)$(INSTALLTOP)/include/openssl
@ : {- output_off() unless grep { $_ eq "OPENSSL_USE_APPLINK" } (@{$target{defines}}, @{$config{defines}}); "" -}
@$(ECHO) "install $(SRCDIR)/ms/applink.c -> $(DESTDIR)$(INSTALLTOP)/include/openssl/applink.c"
@cp $(SRCDIR)/ms/applink.c $(DESTDIR)$(INSTALLTOP)/include/openssl/applink.c
@chmod 644 $(DESTDIR)$(INSTALLTOP)/include/openssl/applink.c
@ : {- output_on() unless grep { $_ eq "OPENSSL_USE_APPLINK" } (@{$target{defines}}, @{$config{defines}}); "" -}
@set -e; for i in $(SRCDIR)/include/openssl/*.h \
$(BLDDIR)/include/openssl/*.h; do \
fn=`basename $$i`; \
$(ECHO) "install $$i -> $(DESTDIR)$(INSTALLTOP)/include/openssl/$$fn"; \
cp $$i $(DESTDIR)$(INSTALLTOP)/include/openssl/$$fn; \
chmod 644 $(DESTDIR)$(INSTALLTOP)/include/openssl/$$fn; \
done
@$(PERL) $(SRCDIR)/util/mkdir-p.pl $(DESTDIR)$(libdir)
@set -e; for l in $(INSTALL_LIBS); do \
fn=`basename $$l`; \
$(ECHO) "install $$l -> $(DESTDIR)$(libdir)/$$fn"; \
cp $$l $(DESTDIR)$(libdir)/$$fn.new; \
$(RANLIB) $(DESTDIR)$(libdir)/$$fn.new; \
chmod 644 $(DESTDIR)$(libdir)/$$fn.new; \
mv -f $(DESTDIR)$(libdir)/$$fn.new \
$(DESTDIR)$(libdir)/$$fn; \
done
@ : {- output_off() if $disabled{shared}; "" -}
@set -e; for s in $(INSTALL_SHLIB_INFO); do \
s1=`echo "$$s" | cut -f1 -d";"`; \
s2=`echo "$$s" | cut -f2 -d";"`; \
fn1=`basename $$s1`; \
fn2=`basename $$s2`; \
: {- output_off(); output_on() unless windowsdll() or sharedaix(); "" -}; \
if [ "$$fn1" != "$$fn2" ]; then \
$(ECHO) "link $(DESTDIR)$(libdir)/$$fn2 -> $(DESTDIR)$(libdir)/$$fn1"; \
ln -sf $$fn1 $(DESTDIR)$(libdir)/$$fn2; \
fi; \
: {- output_off() unless windowsdll() or sharedaix(); output_on() if windowsdll(); "" -}; \
$(ECHO) "install $$s2 -> $(DESTDIR)$(libdir)/$$fn2"; \
cp $$s2 $(DESTDIR)$(libdir)/$$fn2.new; \
chmod 755 $(DESTDIR)$(libdir)/$$fn2.new; \
mv -f $(DESTDIR)$(libdir)/$$fn2.new \
$(DESTDIR)$(libdir)/$$fn2; \
: {- output_off() if windowsdll(); output_on() if sharedaix(); "" -}; \
a=$(DESTDIR)$(libdir)/$$fn2; \
$(ECHO) "install $$s1 -> $$a"; \
if [ -f $$a ]; then ( trap "rm -rf /tmp/ar.$$$$" INT 0; \
mkdir /tmp/ar.$$$$; ( cd /tmp/ar.$$$$; \
cp -f $$a $$a.new; \
for so in `$(AR) t $$a`; do \
$(AR) x $$a $$so; \
chmod u+w $$so; \
strip -X32_64 -e $$so; \
$(AR) r $$a.new $$so; \
done; \
)); fi; \
$(AR) r $$a.new $$s1; \
mv -f $$a.new $$a; \
: {- output_off() if sharedaix(); output_on(); "" -}; \
done
@ : {- output_on() if $disabled{shared}; "" -}
@$(PERL) $(SRCDIR)/util/mkdir-p.pl $(DESTDIR)$(libdir)/pkgconfig
@$(ECHO) "install libcrypto.pc -> $(DESTDIR)$(libdir)/pkgconfig/libcrypto.pc"
@cp libcrypto.pc $(DESTDIR)$(libdir)/pkgconfig
@chmod 644 $(DESTDIR)$(libdir)/pkgconfig/libcrypto.pc
@$(ECHO) "install libssl.pc -> $(DESTDIR)$(libdir)/pkgconfig/libssl.pc"
@cp libssl.pc $(DESTDIR)$(libdir)/pkgconfig
@chmod 644 $(DESTDIR)$(libdir)/pkgconfig/libssl.pc
@$(ECHO) "install openssl.pc -> $(DESTDIR)$(libdir)/pkgconfig/openssl.pc"
@cp openssl.pc $(DESTDIR)$(libdir)/pkgconfig
@chmod 644 $(DESTDIR)$(libdir)/pkgconfig/openssl.pc
uninstall_dev: uninstall_runtime_libs
@$(ECHO) "*** Uninstalling development files"
@ : {- output_off() unless grep { $_ eq "OPENSSL_USE_APPLINK" } (@{$target{defines}}, @{$config{defines}}); "" -}
@$(ECHO) "$(RM) $(DESTDIR)$(INSTALLTOP)/include/openssl/applink.c"
@$(RM) $(DESTDIR)$(INSTALLTOP)/include/openssl/applink.c
@ : {- output_on() unless grep { $_ eq "OPENSSL_USE_APPLINK" } (@{$target{defines}}, @{$config{defines}}); "" -}
@set -e; for i in $(SRCDIR)/include/openssl/*.h \
$(BLDDIR)/include/openssl/*.h; do \
fn=`basename $$i`; \
$(ECHO) "$(RM) $(DESTDIR)$(INSTALLTOP)/include/openssl/$$fn"; \
$(RM) $(DESTDIR)$(INSTALLTOP)/include/openssl/$$fn; \
done
-$(RMDIR) $(DESTDIR)$(INSTALLTOP)/include/openssl
-$(RMDIR) $(DESTDIR)$(INSTALLTOP)/include
@set -e; for l in $(INSTALL_LIBS); do \
fn=`basename $$l`; \
$(ECHO) "$(RM) $(DESTDIR)$(libdir)/$$fn"; \
$(RM) $(DESTDIR)$(libdir)/$$fn; \
done
@ : {- output_off() if $disabled{shared}; "" -}
@set -e; for s in $(INSTALL_SHLIB_INFO); do \
s1=`echo "$$s" | cut -f1 -d";"`; \
s2=`echo "$$s" | cut -f2 -d";"`; \
fn1=`basename $$s1`; \
fn2=`basename $$s2`; \
: {- output_off() if windowsdll(); "" -}; \
$(ECHO) "$(RM) $(DESTDIR)$(libdir)/$$fn2"; \
$(RM) $(DESTDIR)$(libdir)/$$fn2; \
if [ "$$fn1" != "$$fn2" -a -f "$(DESTDIR)$(libdir)/$$fn1" ]; then \
$(ECHO) "$(RM) $(DESTDIR)$(libdir)/$$fn1"; \
$(RM) $(DESTDIR)$(libdir)/$$fn1; \
fi; \
: {- output_on() if windowsdll(); "" -}{- output_off() unless windowsdll(); "" -}; \
$(ECHO) "$(RM) $(DESTDIR)$(libdir)/$$fn2"; \
$(RM) $(DESTDIR)$(libdir)/$$fn2; \
: {- output_on() unless windowsdll(); "" -}; \
done
@ : {- output_on() if $disabled{shared}; "" -}
$(RM) $(DESTDIR)$(libdir)/pkgconfig/libcrypto.pc
$(RM) $(DESTDIR)$(libdir)/pkgconfig/libssl.pc
$(RM) $(DESTDIR)$(libdir)/pkgconfig/openssl.pc
-$(RMDIR) $(DESTDIR)$(libdir)/pkgconfig
-$(RMDIR) $(DESTDIR)$(libdir)
_install_modules_deps: install_runtime_libs build_modules
install_engines: _install_modules_deps
@[ -n "$(INSTALLTOP)" ] || (echo INSTALLTOP should not be empty; exit 1)
@$(PERL) $(SRCDIR)/util/mkdir-p.pl $(DESTDIR)$(ENGINESDIR)/
@$(ECHO) "*** Installing engines"
@set -e; for e in dummy $(INSTALL_ENGINES); do \
if [ "$$e" = "dummy" ]; then continue; fi; \
fn=`basename $$e`; \
$(ECHO) "install $$e -> $(DESTDIR)$(ENGINESDIR)/$$fn"; \
cp $$e $(DESTDIR)$(ENGINESDIR)/$$fn.new; \
chmod 755 $(DESTDIR)$(ENGINESDIR)/$$fn.new; \
mv -f $(DESTDIR)$(ENGINESDIR)/$$fn.new \
$(DESTDIR)$(ENGINESDIR)/$$fn; \
done
uninstall_engines:
@$(ECHO) "*** Uninstalling engines"
@set -e; for e in dummy $(INSTALL_ENGINES); do \
if [ "$$e" = "dummy" ]; then continue; fi; \
fn=`basename $$e`; \
if [ "$$fn" = '{- platform->dso("ossltest") -}' ]; then \
continue; \
fi; \
$(ECHO) "$(RM) $(DESTDIR)$(ENGINESDIR)/$$fn"; \
$(RM) $(DESTDIR)$(ENGINESDIR)/$$fn; \
done
-$(RMDIR) $(DESTDIR)$(ENGINESDIR)
install_modules: _install_modules_deps
@[ -n "$(INSTALLTOP)" ] || (echo INSTALLTOP should not be empty; exit 1)
@$(PERL) $(SRCDIR)/util/mkdir-p.pl $(DESTDIR)$(MODULESDIR)/
@$(ECHO) "*** Installing modules"
@set -e; for e in dummy $(INSTALL_MODULES); do \
if [ "$$e" = "dummy" ]; then continue; fi; \
fn=`basename $$e`; \
$(ECHO) "install $$e -> $(DESTDIR)$(MODULESDIR)/$$fn"; \
cp $$e $(DESTDIR)$(MODULESDIR)/$$fn.new; \
chmod 755 $(DESTDIR)$(MODULESDIR)/$$fn.new; \
mv -f $(DESTDIR)$(MODULESDIR)/$$fn.new \
$(DESTDIR)$(MODULESDIR)/$$fn; \
done
uninstall_modules:
@$(ECHO) "*** Uninstalling modules"
@set -e; for e in dummy $(INSTALL_MODULES); do \
if [ "$$e" = "dummy" ]; then continue; fi; \
fn=`basename $$e`; \
if [ "$$fn" = '{- platform->dso("ossltest") -}' ]; then \
continue; \
fi; \
$(ECHO) "$(RM) $(DESTDIR)$(MODULESDIR)/$$fn"; \
$(RM) $(DESTDIR)$(MODULESDIR)/$$fn; \
done
-$(RMDIR) $(DESTDIR)$(MODULESDIR)
install_runtime: install_programs
install_runtime_libs: build_libs
@[ -n "$(INSTALLTOP)" ] || (echo INSTALLTOP should not be empty; exit 1)
@ : {- output_off() if windowsdll(); "" -}
@$(PERL) $(SRCDIR)/util/mkdir-p.pl $(DESTDIR)$(libdir)
@ : {- output_on() if windowsdll(); output_off() unless windowsdll(); "" -}
@$(PERL) $(SRCDIR)/util/mkdir-p.pl $(DESTDIR)$(INSTALLTOP)/bin
@ : {- output_on() unless windowsdll(); "" -}
@$(ECHO) "*** Installing runtime libraries"
@set -e; for s in dummy $(INSTALL_SHLIBS); do \
if [ "$$s" = "dummy" ]; then continue; fi; \
fn=`basename $$s`; \
: {- output_off() unless windowsdll(); "" -}; \
$(ECHO) "install $$s -> $(DESTDIR)$(INSTALLTOP)/bin/$$fn"; \
cp $$s $(DESTDIR)$(INSTALLTOP)/bin/$$fn.new; \
chmod 755 $(DESTDIR)$(INSTALLTOP)/bin/$$fn.new; \
mv -f $(DESTDIR)$(INSTALLTOP)/bin/$$fn.new \
$(DESTDIR)$(INSTALLTOP)/bin/$$fn; \
: {- output_on() unless windowsdll(); "" -}{- output_off() if windowsdll(); "" -}; \
$(ECHO) "install $$s -> $(DESTDIR)$(libdir)/$$fn"; \
cp $$s $(DESTDIR)$(libdir)/$$fn.new; \
chmod 755 $(DESTDIR)$(libdir)/$$fn.new; \
mv -f $(DESTDIR)$(libdir)/$$fn.new \
$(DESTDIR)$(libdir)/$$fn; \
: {- output_on() if windowsdll(); "" -}; \
done
install_programs: install_runtime_libs build_programs
@[ -n "$(INSTALLTOP)" ] || (echo INSTALLTOP should not be empty; exit 1)
@$(PERL) $(SRCDIR)/util/mkdir-p.pl $(DESTDIR)$(INSTALLTOP)/bin
@$(ECHO) "*** Installing runtime programs"
@set -e; for x in dummy $(INSTALL_PROGRAMS); do \
if [ "$$x" = "dummy" ]; then continue; fi; \
fn=`basename $$x`; \
$(ECHO) "install $$x -> $(DESTDIR)$(INSTALLTOP)/bin/$$fn"; \
cp $$x $(DESTDIR)$(INSTALLTOP)/bin/$$fn.new; \
chmod 755 $(DESTDIR)$(INSTALLTOP)/bin/$$fn.new; \
mv -f $(DESTDIR)$(INSTALLTOP)/bin/$$fn.new \
$(DESTDIR)$(INSTALLTOP)/bin/$$fn; \
done
@set -e; for x in dummy $(BIN_SCRIPTS); do \
if [ "$$x" = "dummy" ]; then continue; fi; \
fn=`basename $$x`; \
$(ECHO) "install $$x -> $(DESTDIR)$(INSTALLTOP)/bin/$$fn"; \
cp $$x $(DESTDIR)$(INSTALLTOP)/bin/$$fn.new; \
chmod 755 $(DESTDIR)$(INSTALLTOP)/bin/$$fn.new; \
mv -f $(DESTDIR)$(INSTALLTOP)/bin/$$fn.new \
$(DESTDIR)$(INSTALLTOP)/bin/$$fn; \
done
uninstall_runtime: uninstall_programs uninstall_runtime_libs
uninstall_programs:
@$(ECHO) "*** Uninstalling runtime programs"
@set -e; for x in dummy $(INSTALL_PROGRAMS); \
do \
if [ "$$x" = "dummy" ]; then continue; fi; \
fn=`basename $$x`; \
$(ECHO) "$(RM) $(DESTDIR)$(INSTALLTOP)/bin/$$fn"; \
$(RM) $(DESTDIR)$(INSTALLTOP)/bin/$$fn; \
done;
@set -e; for x in dummy $(BIN_SCRIPTS); \
do \
if [ "$$x" = "dummy" ]; then continue; fi; \
fn=`basename $$x`; \
$(ECHO) "$(RM) $(DESTDIR)$(INSTALLTOP)/bin/$$fn"; \
$(RM) $(DESTDIR)$(INSTALLTOP)/bin/$$fn; \
done
-$(RMDIR) $(DESTDIR)$(INSTALLTOP)/bin
uninstall_runtime_libs:
@$(ECHO) "*** Uninstalling runtime libraries"
@ : {- output_off() unless windowsdll(); "" -}
@set -e; for s in dummy $(INSTALL_SHLIBS); do \
if [ "$$s" = "dummy" ]; then continue; fi; \
fn=`basename $$s`; \
$(ECHO) "$(RM) $(DESTDIR)$(INSTALLTOP)/bin/$$fn"; \
$(RM) $(DESTDIR)$(INSTALLTOP)/bin/$$fn; \
done
@ : {- output_on() unless windowsdll(); "" -}
install_man_docs: build_man_docs
@[ -n "$(INSTALLTOP)" ] || (echo INSTALLTOP should not be empty; exit 1)
@$(PERL) $(SRCDIR)/util/mkdir-p.pl $(DESTDIR)$(MANDIR)/man1
@$(PERL) $(SRCDIR)/util/mkdir-p.pl $(DESTDIR)$(MANDIR)/man3
@$(PERL) $(SRCDIR)/util/mkdir-p.pl $(DESTDIR)$(MANDIR)/man5
@$(PERL) $(SRCDIR)/util/mkdir-p.pl $(DESTDIR)$(MANDIR)/man7
@$(ECHO) "*** Installing manpages"
@set -e; for x in dummy $(MANDOCS1); do \
if [ "$$x" = "dummy" ]; then continue; fi; \
fn=`basename $$x`; \
$(ECHO) "install $$x -> $(DESTDIR)$(MANDIR)/man1/$${fn}$(MANSUFFIX)"; \
cp $$x $(DESTDIR)$(MANDIR)/man1/$${fn}$(MANSUFFIX); \
chmod 755 $(DESTDIR)$(MANDIR)/man1/$${fn}$(MANSUFFIX); \
done
@set -e; for x in dummy $(MANDOCS3); do \
if [ "$$x" = "dummy" ]; then continue; fi; \
fn=`basename $$x`; \
$(ECHO) "install $$x -> $(DESTDIR)$(MANDIR)/man3/$${fn}$(MANSUFFIX)"; \
cp $$x $(DESTDIR)$(MANDIR)/man3/$${fn}$(MANSUFFIX); \
chmod 755 $(DESTDIR)$(MANDIR)/man3/$${fn}$(MANSUFFIX); \
done
@set -e; for x in dummy $(MANDOCS5); do \
if [ "$$x" = "dummy" ]; then continue; fi; \
fn=`basename $$x`; \
$(ECHO) "install $$x -> $(DESTDIR)$(MANDIR)/man5/$${fn}$(MANSUFFIX)"; \
cp $$x $(DESTDIR)$(MANDIR)/man5/$${fn}$(MANSUFFIX); \
chmod 755 $(DESTDIR)$(MANDIR)/man5/$${fn}$(MANSUFFIX); \
done
@set -e; for x in dummy $(MANDOCS7); do \
if [ "$$x" = "dummy" ]; then continue; fi; \
fn=`basename $$x`; \
$(ECHO) "install $$x -> $(DESTDIR)$(MANDIR)/man7/$${fn}$(MANSUFFIX)"; \
cp $$x $(DESTDIR)$(MANDIR)/man7/$${fn}$(MANSUFFIX); \
chmod 755 $(DESTDIR)$(MANDIR)/man7/$${fn}$(MANSUFFIX); \
done
uninstall_man_docs:
@$(ECHO) "*** Uninstalling manpages"
@set -e; for x in dummy $(MANDOCS1); do \
if [ "$$x" = "dummy" ]; then continue; fi; \
fn=`basename $$x`; \
$(ECHO) "$(RM) $(DESTDIR)$(MANDIR)/man1/$${fn}$(MANSUFFIX)"; \
$(RM) $(DESTDIR)$(MANDIR)/man1/$${fn}$(MANSUFFIX); \
done
@set -e; for x in dummy $(MANDOCS3); do \
if [ "$$x" = "dummy" ]; then continue; fi; \
fn=`basename $$x`; \
$(ECHO) "$(RM) $(DESTDIR)$(MANDIR)/man3/$${fn}$(MANSUFFIX)"; \
$(RM) $(DESTDIR)$(MANDIR)/man3/$${fn}$(MANSUFFIX); \
done
@set -e; for x in dummy $(MANDOCS5); do \
if [ "$$x" = "dummy" ]; then continue; fi; \
fn=`basename $$x`; \
$(ECHO) "$(RM) $(DESTDIR)$(MANDIR)/man5/$${fn}$(MANSUFFIX)"; \
$(RM) $(DESTDIR)$(MANDIR)/man5/$${fn}$(MANSUFFIX); \
done
@set -e; for x in dummy $(MANDOCS7); do \
if [ "$$x" = "dummy" ]; then continue; fi; \
fn=`basename $$x`; \
$(ECHO) "$(RM) $(DESTDIR)$(MANDIR)/man7/$${fn}$(MANSUFFIX)"; \
$(RM) $(DESTDIR)$(MANDIR)/man7/$${fn}$(MANSUFFIX); \
done
install_html_docs: build_html_docs
@[ -n "$(INSTALLTOP)" ] || (echo INSTALLTOP should not be empty; exit 1)
@$(PERL) $(SRCDIR)/util/mkdir-p.pl $(DESTDIR)$(HTMLDIR)/man1
@$(PERL) $(SRCDIR)/util/mkdir-p.pl $(DESTDIR)$(HTMLDIR)/man3
@$(PERL) $(SRCDIR)/util/mkdir-p.pl $(DESTDIR)$(HTMLDIR)/man5
@$(PERL) $(SRCDIR)/util/mkdir-p.pl $(DESTDIR)$(HTMLDIR)/man7
@$(ECHO) "*** Installing HTML manpages"
@set -e; for x in dummy $(HTMLDOCS1); do \
if [ "$$x" = "dummy" ]; then continue; fi; \
fn=`basename $$x`; \
$(ECHO) "install $$x -> $(DESTDIR)$(HTMLDIR)/man1/$$fn"; \
cp $$x $(DESTDIR)$(HTMLDIR)/man1/$$fn; \
chmod 755 $(DESTDIR)$(HTMLDIR)/man1/$$fn; \
done
@set -e; for x in dummy $(HTMLDOCS3); do \
if [ "$$x" = "dummy" ]; then continue; fi; \
fn=`basename $$x`; \
$(ECHO) "install $$x -> $(DESTDIR)$(HTMLDIR)/man3/$$fn"; \
cp $$x $(DESTDIR)$(HTMLDIR)/man3/$$fn; \
chmod 755 $(DESTDIR)$(HTMLDIR)/man3/$$fn; \
done
@set -e; for x in dummy $(HTMLDOCS5); do \
if [ "$$x" = "dummy" ]; then continue; fi; \
fn=`basename $$x`; \
$(ECHO) "install $$x -> $(DESTDIR)$(HTMLDIR)/man5/$$fn"; \
cp $$x $(DESTDIR)$(HTMLDIR)/man5/$$fn; \
chmod 755 $(DESTDIR)$(HTMLDIR)/man5/$$fn; \
done
@set -e; for x in dummy $(HTMLDOCS7); do \
if [ "$$x" = "dummy" ]; then continue; fi; \
fn=`basename $$x`; \
$(ECHO) "install $$x -> $(DESTDIR)$(HTMLDIR)/man7/$$fn"; \
cp $$x $(DESTDIR)$(HTMLDIR)/man7/$$fn; \
chmod 755 $(DESTDIR)$(HTMLDIR)/man7/$$fn; \
done
uninstall_html_docs:
@$(ECHO) "*** Uninstalling HTML manpages"
@set -e; for x in dummy $(HTMLDOCS1); do \
if [ "$$x" = "dummy" ]; then continue; fi; \
fn=`basename $$x`; \
$(ECHO) "$(RM) $(DESTDIR)$(HTMLDIR)/man1/$$fn"; \
$(RM) $(DESTDIR)$(HTMLDIR)/man1/$$fn; \
done
@set -e; for x in dummy $(HTMLDOCS3); do \
if [ "$$x" = "dummy" ]; then continue; fi; \
fn=`basename $$x`; \
$(ECHO) "$(RM) $(DESTDIR)$(HTMLDIR)/man3/$$fn"; \
$(RM) $(DESTDIR)$(HTMLDIR)/man3/$$fn; \
done
@set -e; for x in dummy $(HTMLDOCS5); do \
if [ "$$x" = "dummy" ]; then continue; fi; \
fn=`basename $$x`; \
$(ECHO) "$(RM) $(DESTDIR)$(HTMLDIR)/man5/$$fn"; \
$(RM) $(DESTDIR)$(HTMLDIR)/man5/$$fn; \
done
@set -e; for x in dummy $(HTMLDOCS7); do \
if [ "$$x" = "dummy" ]; then continue; fi; \
fn=`basename $$x`; \
$(ECHO) "$(RM) $(DESTDIR)$(HTMLDIR)/man7/$$fn"; \
$(RM) $(DESTDIR)$(HTMLDIR)/man7/$$fn; \
done
# Developer targets (note: these are only available on Unix) #########
update: generate errors ordinals
generate: generate_apps generate_crypto_bn generate_crypto_objects \
generate_crypto_conf generate_crypto_asn1 generate_fuzz_oids
.PHONY: doc-nits cmd-nits
doc-nits: build_generated
$(PERL) $(SRCDIR)/util/find-doc-nits -n -l -e
cmd-nits: build_generated apps/openssl
$(PERL) $(SRCDIR)/util/find-doc-nits -c
# Test coverage is a good idea for the future
#coverage: $(PROGRAMS) $(TESTPROGRAMS)
# ...
lint:
lint -DLINT $(INCLUDES) $(SRCS)
generate_apps:
( cd $(SRCDIR); $(PERL) VMS/VMSify-conf.pl \
< apps/openssl.cnf > apps/openssl-vms.cnf )
generate_crypto_bn:
( cd $(SRCDIR); $(PERL) crypto/bn/bn_prime.pl > crypto/bn/bn_prime.h )
generate_crypto_objects:
( cd $(SRCDIR); $(PERL) crypto/objects/objects.pl -n \
crypto/objects/objects.txt \
crypto/objects/obj_mac.num \
> crypto/objects/obj_mac.new && \
mv crypto/objects/obj_mac.new crypto/objects/obj_mac.num )
( cd $(SRCDIR); $(PERL) crypto/objects/objects.pl \
crypto/objects/objects.txt \
crypto/objects/obj_mac.num \
> include/openssl/obj_mac.h )
( cd $(SRCDIR); $(PERL) crypto/objects/obj_dat.pl \
include/openssl/obj_mac.h \
> crypto/objects/obj_dat.h )
( cd $(SRCDIR); $(PERL) crypto/objects/objxref.pl \
crypto/objects/obj_mac.num \
crypto/objects/obj_xref.txt \
> crypto/objects/obj_xref.h )
( cd $(SRCDIR); cat crypto/objects/obj_compat.h >> include/openssl/obj_mac.h )
generate_crypto_conf:
( cd $(SRCDIR); $(PERL) crypto/conf/keysets.pl \
> crypto/conf/conf_def.h )
generate_crypto_asn1:
( cd $(SRCDIR); $(PERL) crypto/asn1/charmap.pl \
> crypto/asn1/charmap.h )
generate_fuzz_oids:
( cd $(SRCDIR); $(PERL) fuzz/mkfuzzoids.pl \
crypto/objects/obj_dat.h \
> fuzz/oids.txt )
# Set to -force to force a rebuild
ERROR_REBUILD=
errors:
( b=`pwd`; set -e; cd $(SRCDIR); \
$(PERL) util/ck_errf.pl -strict -internal; \
$(PERL) -I$$b util/mkerr.pl $(ERROR_REBUILD) -internal )
( b=`pwd`; set -e; cd $(SRCDIR)/engines; \
for E in *.ec ; do \
$(PERL) ../util/ck_errf.pl -strict \
-conf $$E `basename $$E .ec`.c; \
$(PERL) -I$$b ../util/mkerr.pl $(ERROR_REBUILD) -static \
-conf $$E `basename $$E .ec`.c ; \
done )
{- use File::Basename;
our @sslheaders =
qw( include/openssl/ssl.h
include/openssl/ssl2.h
include/openssl/ssl3.h
include/openssl/sslerr.h
include/openssl/tls1.h
include/openssl/dtls1.h
include/openssl/srtp.h );
our @cryptoheaders =
qw( include/internal/dso.h
include/internal/o_dir.h
include/internal/err.h
include/internal/evp.h
include/internal/sslconf.h );
our @cryptoskipheaders = ( @sslheaders,
qw( include/openssl/conf_api.h
include/openssl/ebcdic.h
include/openssl/opensslconf.h
include/openssl/symhacks.h ) );
foreach my $f ( glob(catfile($config{sourcedir},
'include','openssl','*.h')) ) {
my $fn = "include/openssl/" . basename($f);
push @cryptoheaders, $fn unless grep { $_ eq $fn } @cryptoskipheaders;
}
"";
-}
CRYPTOHEADERS={- join(" \\\n" . ' ' x 14,
fill_lines(" ", $COLUMNS - 14, sort @cryptoheaders)) -}
SSLHEADERS={- join(" \\\n" . ' ' x 11,
fill_lines(" ", $COLUMNS - 11, sort @sslheaders)) -}
ordinals:
( cd $(SRCDIR); \
$(PERL) util/mknum.pl --version $(VERSION) --no-warnings \
--ordinals util/libcrypto.num \
--symhacks include/openssl/symhacks.h \
$(CRYPTOHEADERS) )
( cd $(SRCDIR); \
$(PERL) util/mknum.pl --version $(VERSION) --no-warnings \
--ordinals util/libssl.num \
--symhacks include/openssl/symhacks.h \
$(SSLHEADERS))
test_ordinals:
( cd test; \
SRCTOP=../$(SRCDIR) \
BLDTOP=../$(BLDDIR) \
$(PERL) ../$(SRCDIR)/test/run_tests.pl test_ordinals )
tags TAGS: FORCE
rm -f TAGS tags
-ctags -R .
-etags `find . -name '*.[ch]' -o -name '*.pm'`
# Release targets (note: only available on Unix) #####################
tar:
(cd $(SRCDIR); ./util/mktar.sh --name='$(NAME)' --tarfile='$(TARFILE)')
# Helper targets #####################################################
link-utils: $(BLDDIR)/util/opensslwrap.sh $(BLDDIR)/util/wrap.pl
$(BLDDIR)/util/opensslwrap.sh $(BLDDIR)/util/wrap.pl: configdata.pm
@if [ "$(SRCDIR)" != "$(BLDDIR)" ]; then \
mkdir -p "$(BLDDIR)/util"; \
ln -sf "../$(SRCDIR)/util/`basename "$@"`" "$(BLDDIR)/util"; \
fi
FORCE:
# Building targets ###################################################
libcrypto.pc libssl.pc openssl.pc: configdata.pm $(LIBS) {- join(" ",map { platform->sharedlib_simple($_) // () } @{$unified_info{libraries}}) -}
libcrypto.pc:
@ ( echo 'prefix=$(INSTALLTOP)'; \
echo 'exec_prefix=$${prefix}'; \
if [ -n "$(LIBDIR)" ]; then \
echo 'libdir=$${exec_prefix}/$(LIBDIR)'; \
else \
echo 'libdir=$(libdir)'; \
fi; \
echo 'includedir=$${prefix}/include'; \
echo 'enginesdir=$${libdir}/engines-{- $sover_dirname -}'; \
echo ''; \
echo 'Name: OpenSSL-libcrypto'; \
echo 'Description: OpenSSL cryptography library'; \
echo 'Version: '$(VERSION); \
echo 'Libs: -L$${libdir} -lcrypto'; \
echo 'Libs.private: $(LIB_EX_LIBS)'; \
echo 'Cflags: -I$${includedir}' ) > libcrypto.pc
libssl.pc:
@ ( echo 'prefix=$(INSTALLTOP)'; \
echo 'exec_prefix=$${prefix}'; \
if [ -n "$(LIBDIR)" ]; then \
echo 'libdir=$${exec_prefix}/$(LIBDIR)'; \
else \
echo 'libdir=$(libdir)'; \
fi; \
echo 'includedir=$${prefix}/include'; \
echo ''; \
echo 'Name: OpenSSL-libssl'; \
echo 'Description: Secure Sockets Layer and cryptography libraries'; \
echo 'Version: '$(VERSION); \
echo 'Requires.private: libcrypto'; \
echo 'Libs: -L$${libdir} -lssl'; \
echo 'Cflags: -I$${includedir}' ) > libssl.pc
openssl.pc:
@ ( echo 'prefix=$(INSTALLTOP)'; \
echo 'exec_prefix=$${prefix}'; \
if [ -n "$(LIBDIR)" ]; then \
echo 'libdir=$${exec_prefix}/$(LIBDIR)'; \
else \
echo 'libdir=$(libdir)'; \
fi; \
echo 'includedir=$${prefix}/include'; \
echo ''; \
echo 'Name: OpenSSL'; \
echo 'Description: Secure Sockets Layer and cryptography libraries and tools'; \
echo 'Version: '$(VERSION); \
echo 'Requires: libssl libcrypto' ) > openssl.pc
configdata.pm: $(SRCDIR)/Configure $(SRCDIR)/config \
{- join(" \\\n" . ' ' x 15,
fill_lines(" ", $COLUMNS - 15,
@{$config{build_file_templates}},
@{$config{build_infos}},
@{$config{conf_files}})) -}
@echo "Detected changed: $?"
$(PERL) configdata.pm -r
@echo "**************************************************"
@echo "*** ***"
@echo "*** Please run the same make command again ***"
@echo "*** ***"
@echo "**************************************************"
@false
reconfigure reconf:
$(PERL) configdata.pm -r
{-
use File::Basename;
use File::Spec::Functions qw/:DEFAULT abs2rel rel2abs/;
# Helper function to figure out dependencies on libraries
# It takes a list of library names and outputs a list of dependencies
sub compute_lib_depends {
# Depending on shared libraries:
# On Windows POSIX layers, we depend on {libname}.dll.a
# On Unix platforms, we depend on {shlibname}.so
return map { platform->sharedlib_simple($_) // platform->staticlib($_) } @_;
}
sub generatesrc {
my %args = @_;
my $generator = join(" ", @{$args{generator}});
my $generator_incs = join("", map { " -I".$_ } @{$args{generator_incs}});
my $incs = join("", map { " -I".$_ } @{$args{incs}});
my $defs = join("", map { " -D".$_ } @{$args{defs}});
my $deps = join(" ", @{$args{generator_deps}}, @{$args{deps}});
if ($args{src} =~ /\.html$/) {
my $title = basename($args{src}, ".html");
my $pod = $args{generator}->[0];
return <<"EOF";
$args{src}: $pod
\$(PERL) \$(SRCDIR)/util/mkpod2html.pl -i "$pod" -o \$\@ -t "$title" -r "\$(SRCDIR)/doc"
EOF
} elsif ($args{src} =~ /\.(\d)$/) {
my $section = $1;
my $name = uc basename($args{src}, ".$section");
my $pod = $args{generator}->[0];
return <<"EOF";
$args{src}: $pod
pod2man --name=$name --section=$section --center=OpenSSL \\
--release=\$(VERSION) $pod >\$\@
EOF
} elsif (platform->isdef($args{src})) {
my $target = platform->def($args{src});
(my $mkdef_os = $target{shared_target}) =~ s|-shared$||;
my $ord_ver = $args{intent} eq 'lib' ? ' --version $(VERSION)' : '';
my $ord_name = $args{generator}->[1] || $args{product};
return <<"EOF";
$target: $args{generator}->[0] $deps \$(SRCDIR)/util/mkdef.pl
\$(PERL) \$(SRCDIR)/util/mkdef.pl$ord_ver --ordinals $args{generator}->[0] --name $ord_name --OS $mkdef_os > $target
EOF
} elsif (!platform->isasm($args{src})) {
if ($args{generator}->[0] =~ m|^.*\.in$|) {
my $dofile = abs2rel(rel2abs(catfile($config{sourcedir},
"util", "dofile.pl")),
rel2abs($config{builddir}));
my @modules = ( 'configdata.pm',
grep { $_ =~ m|\.pm$| } @{$args{deps}} );
my %moduleincs = map { '"-I'.dirname($_).'"' => 1 } @modules;
@modules = map { "-M".basename($_, '.pm') } @modules;
my $modules = join(' ', '', sort keys %moduleincs, @modules);
return <<"EOF";
$args{src}: $args{generator}->[0] $deps \$(BLDDIR)/configdata.pm
\$(PERL)$modules "$dofile" "-o$target{build_file}" $generator > \$@
EOF
} else {
return <<"EOF";
$args{src}: $args{generator}->[0] $deps
\$(PERL)$generator_incs $generator > \$@
EOF
}
} else {
my $cppflags = {
shlib => '$(LIB_CFLAGS) $(LIB_CPPFLAGS)',
lib => '$(LIB_CFLAGS) $(LIB_CPPFLAGS)',
dso => '$(DSO_CFLAGS) $(DSO_CPPFLAGS)',
bin => '$(BIN_CFLAGS) $(BIN_CPPFLAGS)'
} -> {$args{intent}};
if ($args{generator}->[0] =~ /\.pl$/) {
$generator = 'CC="$(CC)" $(PERL)'.$generator_incs.' '.$generator
.' "$(PERLASM_SCHEME)"'.$incs.' '.$cppflags.$defs.' $(PROCESSOR)';
} elsif ($args{generator}->[0] =~ /\.m4$/) {
$generator = 'm4 -B 8192'.$generator_incs.' '.$generator.' >'
} elsif ($args{generator}->[0] =~ /\.S$/) {
$generator = undef;
} else {
die "Generator type for $args{src} unknown: $generator\n";
}
if (defined($generator)) {
return <<"EOF";
$args{src}: $args{generator}->[0] $deps
$generator \$@
EOF
}
return <<"EOF";
$args{src}: $args{generator}->[0] $deps
\$(CC) $incs $cppflags $defs -E $args{generator}->[0] | \\
\$(PERL) -ne '/^#(line)?\\s*[0-9]+/ or print' > \$@
EOF
}
}
# Should one wonder about the end of the Perl snippet, it's because this
# second regexp eats up line endings as well, if the removed path is the
# last in the line. We may therefore need to put back a line ending.
sub src2obj {
my %args = @_;
my $obj = platform->convertext($args{obj});
my $dep = platform->dep($args{obj});
my @srcs = @{$args{srcs}};
my $srcs = join(" ", @srcs);
my $deps = join(" ", @srcs, @{$args{deps}});
my $incs = join("", map { " -I".$_ } @{$args{incs}});
my $defs = join("", map { " -D".$_ } @{$args{defs}});
my $cmd;
my $cmdflags;
my $cmdcompile;
if (grep /\.rc$/, @srcs) {
$cmd = '$(RC)';
$cmdflags = '$(RCFLAGS)';
$cmdcompile = '';
} elsif (grep /\.(cc|cpp)$/, @srcs) {
$cmd = '$(CXX)';
$cmdcompile = ' -c';
$cmdflags = {
shlib => '$(LIB_CXXFLAGS) $(LIB_CPPFLAGS)',
lib => '$(LIB_CXXFLAGS) $(LIB_CPPFLAGS)',
dso => '$(DSO_CXXFLAGS) $(DSO_CPPFLAGS)',
bin => '$(BIN_CXXFLAGS) $(BIN_CPPFLAGS)'
} -> {$args{intent}};
} else {
$cmd = '$(CC)';
$cmdcompile = ' -c';
$cmdflags = {
shlib => '$(LIB_CFLAGS) $(LIB_CPPFLAGS)',
lib => '$(LIB_CFLAGS) $(LIB_CPPFLAGS)',
dso => '$(DSO_CFLAGS) $(DSO_CPPFLAGS)',
bin => '$(BIN_CFLAGS) $(BIN_CPPFLAGS)'
} -> {$args{intent}};
}
my $recipe;
# extension-specific rules
if (grep /\.s$/, @srcs) {
$recipe .= <<"EOF";
$obj: $deps
$cmd $cmdflags -c -o \$\@ $srcs
EOF
} elsif (grep /\.S$/, @srcs) {
# Originally there was mutli-step rule with $(CC) -E file.S
# followed by $(CC) -c file.s. It compensated for one of
# legacy platform compiler's inability to handle .S files.
# The platform is long discontinued by vendor so there is
# hardly a point to drag it along...
$recipe .= <<"EOF";
$obj: $deps
$cmd $incs $defs $cmdflags -c -o \$\@ $srcs
EOF
} elsif (defined $makedepprog && $makedepprog !~ /\/makedepend/
&& !grep /\.rc$/, @srcs) {
$recipe .= <<"EOF";
$obj: $deps
$cmd $incs $defs $cmdflags -MMD -MF $dep.tmp -MT \$\@ -c -o \$\@ $srcs
\@touch $dep.tmp
\@if cmp $dep.tmp $dep > /dev/null 2> /dev/null; then \\
rm -f $dep.tmp; \\
else \\
mv $dep.tmp $dep; \\
fi
EOF
} else {
$recipe .= <<"EOF";
$obj: $deps
$cmd $incs $defs $cmdflags $cmdcompile -o \$\@ $srcs
EOF
if (defined $makedepprog && $makedepprog =~ /\/makedepend/) {
$recipe .= <<"EOF";
\$(MAKEDEPEND) -f- -Y -- $incs $cmdflags -- $srcs 2>/dev/null \\
> $dep
EOF
}
}
return $recipe;
}
# We *know* this routine is only called when we've configure 'shared'.
sub obj2shlib {
my %args = @_;
my @linkdirs = ();
my @linklibs = ();
foreach (@{$args{deps}}) {
if (platform->isstaticlib($_)) {
push @linklibs, platform->convertext($_);
} else {
my $d = "-L" . dirname($_);
my $l = basename($_);
$l =~ s/^lib//;
$l = "-l" . $l;
push @linklibs, $l;
push @linkdirs, $d unless grep { $d eq $_ } @linkdirs;
}
}
my $linkflags = join("", map { $_." " } @linkdirs);
my $linklibs = join("", map { $_." " } @linklibs);
my @objs = map { platform->convertext($_) }
grep { !platform->isdef($_) }
@{$args{objs}};
my @defs = map { platform->def($_) }
grep { platform->isdef($_) }
@{$args{objs}};
my @deps = compute_lib_depends(@{$args{deps}});
die "More than one exported symbol map" if scalar @defs > 1;
my $simple = platform->sharedlib_simple($args{lib});
my $full = platform->sharedlib($args{lib});
my $shared_soname = "";
$shared_soname .= ' '.$target{shared_sonameflag}.basename($full)
if defined $target{shared_sonameflag};
my $shared_imp = "";
$shared_imp .= ' '.$target{shared_impflag}.basename($simple)
if defined $target{shared_impflag};
my $shared_def = join("", map { ' '.$target{shared_defflag}.$_ } @defs);
my $objs = join(" \\\n\t\t", fill_lines(' ', $COLUMNS - 16, @objs));
my $deps = join(" \\\n" . ' ' x (length($full) + 2),
fill_lines(' ', $COLUMNS - length($full) - 2,
@objs, @defs, @deps));
my $recipe = <<"EOF";
$simple: $full
EOF
if (sharedaix()) {
$recipe .= <<"EOF";
rm -f $simple && \\
\$(AR) r $simple $full
EOF
} elsif ($simple ne $full) {
$recipe .= <<"EOF";
rm -f $simple && \\
ln -s $full $simple
EOF
}
$recipe .= <<"EOF";
$full: $deps
\$(CC) \$(LIB_CFLAGS) $linkflags\$(LIB_LDFLAGS)$shared_soname$shared_imp \\
-o $full$shared_def \\
$objs \\
$linklibs \$(LIB_EX_LIBS)
EOF
if (windowsdll()) {
$recipe .= <<"EOF";
rm -f apps/$full
rm -f test/$full
rm -f fuzz/$full
cp -p $full apps/
cp -p $full test/
cp -p $full fuzz/
EOF
}
return $recipe;
}
sub obj2dso {
my %args = @_;
my $dso = platform->dso($args{module});
my @linkdirs = ();
my @linklibs = ();
foreach (@{$args{deps}}) {
next unless defined $_;
if (platform->isstaticlib($_)) {
push @linklibs, platform->convertext($_);
} else {
my $d = "-L" . dirname($_);
my $l = basename($_);
$l =~ s/^lib//;
$l = "-l" . $l;
push @linklibs, $l;
push @linkdirs, $d unless grep { $d eq $_ } @linkdirs;
}
}
my $linkflags = join("", map { $_." " } @linkdirs);
my $linklibs = join("", map { $_." " } @linklibs);
my @objs = map { platform->convertext($_) }
grep { !platform->isdef($_) }
@{$args{objs}};
my @defs = map { platform->def($_) }
grep { platform->isdef($_) }
@{$args{objs}};
my @deps = compute_lib_depends(@{$args{deps}});
my $shared_def = join("", map { ' '.$target{shared_defflag}.$_ } @defs);
my $objs = join(" \\\n\t\t", fill_lines(' ', $COLUMNS - 16, @objs));
my $deps = join(" \\\n" . ' ' x (length($dso) + 2),
fill_lines(' ', $COLUMNS - length($dso) - 2,
@objs, @defs, @deps));
return <<"EOF";
$dso: $deps
\$(CC) \$(DSO_CFLAGS) $linkflags\$(DSO_LDFLAGS) \\
-o $dso$shared_def \\
$objs \\
$linklibs\$(DSO_EX_LIBS)
EOF
}
sub obj2lib {
my %args = @_;
my $lib = platform->staticlib($args{lib});
my @objs = map { platform->obj($_) } @{$args{objs}};
my $objs = join(" \\\n" . ' ' x (length($lib) + 2),
fill_lines(' ', $COLUMNS - length($lib) - 2, @objs));
return <<"EOF";
$lib: $objs
\$(AR) \$(ARFLAGS) \$\@ \$\?
\$(RANLIB) \$\@ || echo Never mind.
EOF
}
sub obj2bin {
my %args = @_;
my $bin = platform->bin($args{bin});
my @objs = map { platform->obj($_) } @{$args{objs}};
my @deps = compute_lib_depends(@{$args{deps}});
my $objs = join(" \\\n" . ' ' x (length($bin) + 2),
fill_lines(' ', $COLUMNS - length($bin) - 2, @objs));
my @linkdirs = ();
my @linklibs = ();
foreach (@{$args{deps}}) {
next unless defined $_;
if (platform->isstaticlib($_)) {
push @linklibs, platform->convertext($_);
} else {
my $d = "-L" . dirname($_);
my $l = basename($_);
$l =~ s/^lib//;
$l = "-l" . $l;
push @linklibs, $l;
push @linkdirs, $d unless grep { $d eq $_ } @linkdirs;
}
}
my $linkflags = join("", map { $_." " } @linkdirs);
my $linklibs = join("", map { $_." " } @linklibs);
my $cmd = '$(CC)';
my $cmdflags = '$(BIN_CFLAGS)';
if (grep /_cc\.o$/, @{$args{objs}}) {
$cmd = '$(CXX)';
$cmdflags = '$(BIN_CXXFLAGS)';
}
my $objs = join(" \\\n\t\t", fill_lines(' ', $COLUMNS - 16, @objs));
my $deps = join(" \\\n" . ' ' x (length($bin) + 2),
fill_lines(' ', $COLUMNS - length($bin) - 2,
@objs, @deps));
return <<"EOF";
$bin: $deps
rm -f $bin
\$\${LDCMD:-$cmd} $cmdflags $linkflags\$(BIN_LDFLAGS) \\
-o $bin \\
$objs \\
$linklibs\$(BIN_EX_LIBS)
EOF
}
sub in2script {
my %args = @_;
my $script = $args{script};
my $sources = join(" ", @{$args{sources}});
my $dofile = abs2rel(rel2abs(catfile($config{sourcedir},
"util", "dofile.pl")),
rel2abs($config{builddir}));
return <<"EOF";
$script: $sources
\$(PERL) "-I\$(BLDDIR)" -Mconfigdata "$dofile" \\
"-o$target{build_file}" $sources > "$script"
chmod a+x $script
EOF
}
sub generatedir {
my %args = @_;
my $dir = $args{dir};
my @deps = map { platform->convertext($_) } @{$args{deps}};
my @comments = ();
my %extinfo = ( dso => platform->dsoext(),
lib => platform->libext(),
bin => platform->binext() );
# We already have a 'test' target, and the top directory is just plain
# silly
return if $dir eq "test" || $dir eq ".";
foreach my $type (("dso", "lib", "bin", "script")) {
next unless defined($unified_info{dirinfo}->{$dir}->{products}->{$type});
# For lib object files, we could update the library. However, it
# was decided that it's enough to build the directory local object
# files, so we don't need to add any actions, and the dependencies
# are already taken care of.
if ($type ne "lib") {
foreach my $prod (@{$unified_info{dirinfo}->{$dir}->{products}->{$type}}) {
if (dirname($prod) eq $dir) {
push @deps, $prod.$extinfo{$type};
} else {
push @comments, "# No support to produce $type ".join(", ", @{$unified_info{dirinfo}->{$dir}->{products}->{$type}});
}
}
}
}
my $target = "$dir $dir/";
my $deps = join(" \\\n\t",
fill_lines(' ', $COLUMNS - 8, @deps));
my $comments = join("\n", "", @comments);
return <<"EOF";
$target: \\
$deps$comments
EOF
}
"" # Important! This becomes part of the template result.
-}
Computing file changes ...
