| cb586de | Chuck Lever | 03 January 2020, 16:56:32 UTC | xprtrdma: Make sendctx queue lifetime the same as connection lifetime The size of the sendctx queue depends on the value stored in ia->ri_max_send_sges. This value is determined by querying the underlying device. Eventually, rpcrdma_ia_open() and rpcrdma_ep_create() will be called in the connect worker rather than at transport set-up time. The underlying device will not have been chosen device set-up time. The sendctx queue will thus have to be created after the underlying device has been chosen via address and route resolution; in other words, in the connect worker. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> | 15 January 2020, 15:54:32 UTC |
| 2e87036 | Chuck Lever | 03 January 2020, 16:56:27 UTC | xprtrdma: Eliminate ri_max_send_sges Clean-up. The max_send_sge value also happens to be stored in ep->rep_attr. Let's keep just a single copy. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> | 15 January 2020, 15:54:32 UTC |
| e0b27d9 | Colin Ian King | 06 January 2020, 13:17:34 UTC | NFS: Add missing null check for failed allocation Currently the allocation of buf is not being null checked and a null pointer dereference can occur when the memory allocation fails. Fix this by adding a check and returning -ENOMEM. Addresses-Coverity: ("Dereference null return") Fixes: 6d972518b821 ("NFS: Add fs_context support.") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> | 15 January 2020, 15:54:31 UTC |
| 474c4f3 | Geert Uytterhoeven | 30 December 2019, 15:32:38 UTC | nfs: NFS_SWAP should depend on SWAP If CONFIG_SWAP=n, it does not make much sense to offer the user the option to enable support for swapping over NFS, as that will still fail at run time: # swapon /swap swapon: /swap: swapon failed: Function not implemented Fix this by adding a dependency on CONFIG_SWAP. Fixes: a564b8f0398636ba ("nfs: enable swap on NFS") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> | 15 January 2020, 15:54:31 UTC |
| c2bd2c0 | Julia Lawall | 01 January 2020, 07:43:30 UTC | SUNRPC: constify copied structure The empty_iov structure is only copied into another structure, so make it const. The opportunity for this change was found using Coccinelle. Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> | 15 January 2020, 15:54:31 UTC |
| bd89bc6 | Murphy Zhou | 02 January 2020, 08:04:26 UTC | fs/nfs, swapon: check holes in swapfile swapon over NFS does not go through generic_swapfile_activate code path when setting up extents. This makes holes in NFS swapfiles possible which is not expected for swapon. Signed-off-by: Murphy Zhou <jencce.kernel@gmail.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> | 15 January 2020, 15:54:31 UTC |
| b845760 | Chuck Lever | 23 December 2019, 15:28:44 UTC | SUNRPC: call_connect_status should handle -EPROTO The xprtrdma connect logic can return -EPROTO if the underlying device or network path does not support RDMA. This can happen after a device removal/insertion. - When SOFTCONN is set, EPROTO is a permanent error. - When SOFTCONN is not set, EPROTO is treated as a temporary error. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> | 15 January 2020, 15:54:31 UTC |
| 2bb50aa | Chuck Lever | 23 December 2019, 15:28:38 UTC | NFS4: Report callback authentication errors This seems to be a somewhat common issue with Kerberos NFSv4.0 set-ups. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> | 15 January 2020, 15:54:31 UTC |
| 861e167 | Chuck Lever | 23 December 2019, 15:28:33 UTC | NFS: Introduce trace events triggered by page writeback errors Try to capture the reason for the writeback path tagging an error on a page. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> | 15 January 2020, 15:54:31 UTC |
| abf8af7 | Chuck Lever | 23 December 2019, 15:28:28 UTC | SUNRPC: Capture signalled RPC tasks Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> | 15 January 2020, 15:54:31 UTC |
| 6ed2144 | zhengbin | 19 December 2019, 06:14:18 UTC | NFS: move dprintk after nfs_alloc_fattr in nfs3_proc_lookup In nfs3_proc_lookup, if nfs_alloc_fattr fails, will only print "NFS call lookup". This may be confusing, move dprintk after nfs_alloc_fattr. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: zhengbin <zhengbin13@huawei.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> | 15 January 2020, 15:54:31 UTC |
| 8b98a53 | zhengbin | 19 December 2019, 10:34:47 UTC | NFS4: Remove unneeded semicolon Fixes coccicheck warning: fs/nfs/nfs4state.c:1138:2-3: Unneeded semicolon fs/nfs/nfs4proc.c:6862:2-3: Unneeded semicolon fs/nfs/nfs4proc.c:8629:2-3: Unneeded semicolon Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: zhengbin <zhengbin13@huawei.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> | 15 January 2020, 15:54:31 UTC |
| a3167da | Arnd Bergmann | 11 November 2019, 20:16:27 UTC | nfs: encode nfsv4 timestamps as 64-bit On 32-bit architectures, xdr_encode_nfstime4() needlessly truncates timestamps to a 32-bit value in the range between year 1902 and 2038. Change it to use 'struct timespec64' to allow the entire range of values supported by the server. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> | 15 January 2020, 15:54:30 UTC |
| e5189e9 | Arnd Bergmann | 11 November 2019, 20:16:26 UTC | nfs: remove timespec from xdr_encode_nfstime For NFSv2 and NFSv3, timestamps are stored using 32-bit entities and overflow in y2038. For historic reasons we truncate the 64-bit timestamps by converting from a timespec64 to a timespec first. Remove this unnecessary conversion step and do the truncation in the final functions that take a timestamp. This is transparent to users, but avoids one of the last uses of 'timespec' and lets us remove it later. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> | 15 January 2020, 15:54:30 UTC |
| bc35b6b | Arnd Bergmann | 11 November 2019, 20:16:25 UTC | nfs: fscache: use timespec64 in inode auxdata nfs currently behaves differently on 32-bit and 64-bit kernels regarding the on-disk format of nfs_fscache_inode_auxdata. That format should really be the same on any kernel, and we should avoid the 'timespec' type in order to remove that from the kernel later on. Using plain 'timespec64' would not be good here, since that includes implied padding and would possibly leak kernel stack data to the on-disk format on 32-bit architectures. struct __kernel_timespec would work as a replacement, but open-coding the two struct members in nfs_fscache_inode_auxdata makes it more obvious what's going on here, and keeps the current format for 64-bit architectures. Cc: David Howells <dhowells@redhat.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> | 15 January 2020, 15:54:30 UTC |
| ae08483 | Arnd Bergmann | 11 November 2019, 20:16:23 UTC | nfs: use timespec64 in nfs_fattr Push down the use of timespec64 into NFS nfs_fattr, to avoid needless conversions, and get closer to having 64-bit time_t support on 32-bit NFSv4 and removing some old interfaces from the kernel. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> | 15 January 2020, 15:54:30 UTC |
| 52879b4 | Arnd Bergmann | 11 November 2019, 20:16:21 UTC | sunrpc: convert to time64_t for expiry Using signed 32-bit types for UTC time leads to the y2038 overflow, which is what happens in the sunrpc code at the moment. This changes the sunrpc code over to use time64_t where possible. The one exception is the gss_import_v{1,2}_context() function for kerberos5, which uses 32-bit timestamps in the protocol. Here, we can at least treat the numbers as 'unsigned', which extends the range from 2038 to 2106. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> | 15 January 2020, 15:54:30 UTC |
| ce8866f | Scott Mayhew | 10 December 2019, 12:31:15 UTC | NFS: Attach supplementary error information to fs_context. Split out from commit "NFS: Add fs_context support." Add wrappers nfs_errorf(), nfs_invalf(), and nfs_warnf() which log error information to the fs_context. Convert some printk's to use these new wrappers instead. Signed-off-by: Scott Mayhew <smayhew@redhat.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> | 15 January 2020, 15:15:17 UTC |
| 62a55d0 | Scott Mayhew | 10 December 2019, 12:31:14 UTC | NFS: Additional refactoring for fs_context conversion Split out from commit "NFS: Add fs_context support." This patch adds additional refactoring for the conversion of NFS to use fs_context, namely: (*) Merge nfs_mount_info and nfs_clone_mount into nfs_fs_context. nfs_clone_mount has had several fields removed, and nfs_mount_info has been removed altogether. (*) Various functions now take an fs_context as an argument instead of nfs_mount_info, nfs_fs_context, etc. Signed-off-by: Scott Mayhew <smayhew@redhat.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> | 15 January 2020, 15:15:17 UTC |
| f2aedb7 | David Howells | 10 December 2019, 12:31:13 UTC | NFS: Add fs_context support. Add filesystem context support to NFS, parsing the options in advance and attaching the information to struct nfs_fs_context. The highlights are: (*) Merge nfs_mount_info and nfs_clone_mount into nfs_fs_context. This structure represents NFS's superblock config. (*) Make use of the VFS's parsing support to split comma-separated lists (*) Pin the NFS protocol module in the nfs_fs_context. (*) Attach supplementary error information to fs_context. This has the downside that these strings must be static and can't be formatted. (*) Remove the auxiliary file_system_type structs since the information necessary can be conveyed in the nfs_fs_context struct instead. (*) Root mounts are made by duplicating the config for the requested mount so as to have the same parameters. Submounts pick up their parameters from the parent superblock. [AV -- retrans is u32, not string] [SM -- Renamed cfg to ctx in a few functions in an earlier patch] [SM -- Moved fs_context mount option parsing to an earlier patch] [SM -- Moved fs_context error logging to a later patch] [SM -- Fixed printks in nfs4_try_get_tree() and nfs4_get_referral_tree()] [SM -- Added is_remount_fc() helper] [SM -- Deferred some refactoring to a later patch] [SM -- Fixed referral mounts, which were broken in the original patch] [SM -- Fixed leak of nfs_fattr when fs_context is freed] Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Scott Mayhew <smayhew@redhat.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> | 15 January 2020, 15:15:17 UTC |
| e38bb23 | Scott Mayhew | 10 December 2019, 12:31:12 UTC | NFS: Convert mount option parsing to use functionality from fs_parser.h Split out from commit "NFS: Add fs_context support." Convert existing mount option definitions to fs_parameter_enum's and fs_parameter_spec's. Parse mount options using fs_parse() and lookup_constant(). Notes: 1) Fixed a typo in the udp6 definition in nfs_xprt_protocol_tokens from the original commit. 2) fs_parse() expects an fs_context as the first arg so that any errors can be logged to the fs_context. We're passing NULL for the fs_context (this will change in commit "NFS: Add fs_context support.") which is okay as it will cause logfc() to do a printk() instead. 3) fs_parse() expects an fs_paramter as the third arg. We're building an fs_parameter manually in nfs_fs_context_parse_option(), which will go away in commit "NFS: Add fs_context support.". Signed-off-by: Scott Mayhew <smayhew@redhat.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> | 15 January 2020, 15:15:17 UTC |
| 38465f5 | Scott Mayhew | 10 December 2019, 12:31:11 UTC | NFS: rename nfs_fs_context pointer arg in a few functions Split out from commit "NFS: Add fs_context support." Rename cfg to ctx in nfs_init_server(), nfs_verify_authflavors(), and nfs_request_mount(). No functional changes. Signed-off-by: Scott Mayhew <smayhew@redhat.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> | 15 January 2020, 15:15:17 UTC |
| e558100 | David Howells | 10 December 2019, 12:31:10 UTC | NFS: Do some tidying of the parsing code Do some tidying of the parsing code, including: (*) Returning 0/error rather than true/false. (*) Putting the nfs_fs_context pointer first in some arg lists. (*) Unwrap some lines that will now fit on one line. (*) Provide unioned sockaddr/sockaddr_storage fields to avoid casts. (*) nfs_parse_devname() can paste its return values directly into the nfs_fs_context struct as that's where the caller puts them. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> | 15 January 2020, 15:15:17 UTC |
| 48be8a6 | David Howells | 10 December 2019, 12:31:09 UTC | NFS: Add a small buffer in nfs_fs_context to avoid string dup Add a small buffer in nfs_fs_context to avoid string duplication when parsing numbers. Also make the parsing function wrapper place the parsed integer directly in the appropriate nfs_fs_context struct member. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> | 15 January 2020, 15:15:17 UTC |
| cbd071b | David Howells | 10 December 2019, 12:31:08 UTC | NFS: Deindent nfs_fs_context_parse_option() Deindent nfs_fs_context_parse_option(). Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> | 15 January 2020, 15:15:17 UTC |
| f8ee01e | David Howells | 10 December 2019, 12:31:07 UTC | NFS: Split nfs_parse_mount_options() Split nfs_parse_mount_options() to move the prologue, list-splitting and epilogue into one function and the per-option processing into another. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> | 15 January 2020, 15:15:17 UTC |
| 5eb005c | David Howells | 10 December 2019, 12:31:06 UTC | NFS: Rename struct nfs_parsed_mount_data to struct nfs_fs_context Rename struct nfs_parsed_mount_data to struct nfs_fs_context and rename pointers to it to "ctx". At some point this will be pointed to by an fs_context struct's fs_private pointer. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> | 15 January 2020, 15:15:17 UTC |
| e0a626b | David Howells | 10 December 2019, 12:31:05 UTC | NFS: Constify mount argument match tables The mount argument match tables should never be altered so constify them. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> | 15 January 2020, 15:15:17 UTC |
| 9954bf9 | David Howells | 10 December 2019, 12:31:04 UTC | NFS: Move mount parameterisation bits into their own file Split various bits relating to mount parameterisation out from fs/nfs/super.c into their own file to form the basis of filesystem context handling for NFS. No other changes are made to the code beyond removing 'static' qualifiers. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> | 15 January 2020, 15:15:17 UTC |
| adf2314 | Al Viro | 10 December 2019, 12:31:03 UTC | nfs: get rid of ->set_security() it's always either nfs_set_sb_security() or nfs_clone_sb_security(), the choice being controlled by mount_info->cloned != NULL. No need to add methods, especially when both instances live right next to the caller and are never accessed anywhere else. Reviewed-by: David Howells <dhowells@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> | 15 January 2020, 15:15:16 UTC |
| ba8b614 | Al Viro | 10 December 2019, 12:31:02 UTC | nfs_clone_sb_security(): simplify the check for server bogosity We used to check ->i_op for being nfs_dir_inode_operations. With separate inode_operations for v3 and v4 that became bogus, but rather than going for protocol-dependent comparison we could've just checked ->i_fop instead; _that_ is the same for all protocol versions. Reviewed-by: David Howells <dhowells@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> | 15 January 2020, 15:15:16 UTC |
| ab88dca | Al Viro | 10 December 2019, 12:31:01 UTC | nfs: get rid of mount_info ->fill_super() The only possible values are nfs_fill_super and nfs_clone_super. The latter is used only when crossing into a submount and it is almost identical to the former; the only differences are * ->s_time_gran unconditionally set to 1 (even for v2 mounts). Regression dating back to 2012, actually. * ->s_blocksize/->s_blocksize_bits set to that of parent. Rather than messing with the method, stash ->s_blocksize_bits in mount_info in submount case and after the (now unconditional) call of nfs_fill_super() override ->s_blocksize/->s_blocksize_bits if that has been set. Reviewed-by: David Howells <dhowells@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> | 15 January 2020, 15:15:16 UTC |
| 0c38f21 | Al Viro | 10 December 2019, 12:31:00 UTC | nfs: don't pass nfs_subversion to ->create_server() pick it from mount_info Reviewed-by: David Howells <dhowells@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> | 15 January 2020, 15:15:16 UTC |
| 1bc3a2c | Al Viro | 10 December 2019, 12:30:59 UTC | nfs: unexport nfs_fs_mount_common() Make it static, even. And remove a stale extern of (long-gone) nfs_xdev_mount_common() from internal.h, while we are at it. Reviewed-by: David Howells <dhowells@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> | 15 January 2020, 15:15:16 UTC |
| 82eaed2 | Al Viro | 10 December 2019, 12:30:58 UTC | nfs: merge xdev and remote file_system_type they are identical now... Reviewed-by: David Howells <dhowells@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> | 15 January 2020, 15:15:16 UTC |
| a55d329 | Al Viro | 10 December 2019, 12:30:57 UTC | nfs: don't bother passing nfs_subversion to ->try_mount() and nfs_fs_mount_common() Reviewed-by: David Howells <dhowells@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> | 15 January 2020, 15:15:16 UTC |
| 6a3f7a3 | Al Viro | 10 December 2019, 12:30:56 UTC | nfs: stash nfs_subversion reference into nfs_mount_info That will allow to get rid of passing those references around in quite a few places. Moreover, that will allow to merge xdev and remote file_system_type. Reviewed-by: David Howells <dhowells@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> | 15 January 2020, 15:15:16 UTC |
| 250d69f | Al Viro | 10 December 2019, 12:30:55 UTC | nfs: lift setting mount_info from nfs_xdev_mount() Do it in nfs_do_submount() instead. As a side benefit, nfs_clone_data doesn't need ->fh and ->fattr anymore. Reviewed-by: David Howells <dhowells@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> | 15 January 2020, 15:15:16 UTC |
| 4e35776 | Al Viro | 10 December 2019, 12:30:54 UTC | nfs4: fold nfs_do_root_mount/nfs_follow_remote_path Reviewed-by: David Howells <dhowells@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> | 15 January 2020, 15:15:16 UTC |
| 6654f8e | Al Viro | 10 December 2019, 12:30:53 UTC | nfs: don't bother setting/restoring export_path around do_nfs_root_mount() nothing in it will be looking at that thing anyway Reviewed-by: David Howells <dhowells@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> | 15 January 2020, 15:15:16 UTC |
| 15a9c4e | Al Viro | 10 December 2019, 12:30:52 UTC | nfs: fold nfs4_remote_fs_type and nfs4_remote_referral_fs_type They are identical now. Reviewed-by: David Howells <dhowells@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> | 15 January 2020, 15:15:16 UTC |
| 7643c12 | Al Viro | 10 December 2019, 12:30:51 UTC | nfs: lift setting mount_info from nfs4_remote{,_referral}_mount Do that (fhandle allocation, setting struct server up) in nfs4_referral_mount() and nfs4_try_mount() resp. and pass the server and pointer to mount_info into nfs_do_root_mount() so that nfs4_remote_referral_mount()/nfs_remote_mount() could be merged. Since we are moving stuff from ->mount() instances to the points prior to vfs_kern_mount() that would trigger those, we need to make sure that do_nfs_root_mount() will do the corresponding cleanup itself if it doesn't trigger those ->mount() instances. Reviewed-by: David Howells <dhowells@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> | 15 January 2020, 15:15:16 UTC |
| d0b779d | Al Viro | 10 December 2019, 12:30:50 UTC | nfs: stash server into struct nfs_mount_info Reviewed-by: David Howells <dhowells@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> | 15 January 2020, 15:15:16 UTC |
| 444a529 | Al Viro | 10 December 2019, 12:30:49 UTC | saner calling conventions for nfs_fs_mount_common() Allow it to take ERR_PTR() for server and return ERR_CAST() of it in such case. All callers used to open-code that... Reviewed-by: David Howells <dhowells@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> | 15 January 2020, 15:15:16 UTC |
| 95e20af | Linus Torvalds | 14 January 2020, 21:33:14 UTC | Merge tag 'nfs-for-5.5-2' of git://git.linux-nfs.org/projects/anna/linux-nfs Pull NFS client bugfixes from Anna Schumaker: "Three NFS over RDMA fixes for bugs Chuck found that can be hit during device removal: - Fix create_qp crash on device unload - Fix completion wait during device removal - Fix oops in receive handler after device removal" * tag 'nfs-for-5.5-2' of git://git.linux-nfs.org/projects/anna/linux-nfs: xprtrdma: Fix oops in Receive handler after device removal xprtrdma: Fix completion wait during device removal xprtrdma: Fix create_qp crash on device unload | 14 January 2020, 21:33:14 UTC |
| 671c450 | Chuck Lever | 03 January 2020, 16:52:22 UTC | xprtrdma: Fix oops in Receive handler after device removal Since v5.4, a device removal occasionally triggered this oops: Dec 2 17:13:53 manet kernel: BUG: unable to handle page fault for address: 0000000c00000219 Dec 2 17:13:53 manet kernel: #PF: supervisor read access in kernel mode Dec 2 17:13:53 manet kernel: #PF: error_code(0x0000) - not-present page Dec 2 17:13:53 manet kernel: PGD 0 P4D 0 Dec 2 17:13:53 manet kernel: Oops: 0000 [#1] SMP Dec 2 17:13:53 manet kernel: CPU: 2 PID: 468 Comm: kworker/2:1H Tainted: G W 5.4.0-00050-g53717e43af61 #883 Dec 2 17:13:53 manet kernel: Hardware name: Supermicro SYS-6028R-T/X10DRi, BIOS 1.1a 10/16/2015 Dec 2 17:13:53 manet kernel: Workqueue: ib-comp-wq ib_cq_poll_work [ib_core] Dec 2 17:13:53 manet kernel: RIP: 0010:rpcrdma_wc_receive+0x7c/0xf6 [rpcrdma] Dec 2 17:13:53 manet kernel: Code: 6d 8b 43 14 89 c1 89 45 78 48 89 4d 40 8b 43 2c 89 45 14 8b 43 20 89 45 18 48 8b 45 20 8b 53 14 48 8b 30 48 8b 40 10 48 8b 38 <48> 8b 87 18 02 00 00 48 85 c0 75 18 48 8b 05 1e 24 c4 e1 48 85 c0 Dec 2 17:13:53 manet kernel: RSP: 0018:ffffc900035dfe00 EFLAGS: 00010246 Dec 2 17:13:53 manet kernel: RAX: ffff888467290000 RBX: ffff88846c638400 RCX: 0000000000000048 Dec 2 17:13:53 manet kernel: RDX: 0000000000000048 RSI: 00000000f942e000 RDI: 0000000c00000001 Dec 2 17:13:53 manet kernel: RBP: ffff888467611b00 R08: ffff888464e4a3c4 R09: 0000000000000000 Dec 2 17:13:53 manet kernel: R10: ffffc900035dfc88 R11: fefefefefefefeff R12: ffff888865af4428 Dec 2 17:13:53 manet kernel: R13: ffff888466023000 R14: ffff88846c63f000 R15: 0000000000000010 Dec 2 17:13:53 manet kernel: FS: 0000000000000000(0000) GS:ffff88846fa80000(0000) knlGS:0000000000000000 Dec 2 17:13:53 manet kernel: CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 Dec 2 17:13:53 manet kernel: CR2: 0000000c00000219 CR3: 0000000002009002 CR4: 00000000001606e0 Dec 2 17:13:53 manet kernel: Call Trace: Dec 2 17:13:53 manet kernel: __ib_process_cq+0x5c/0x14e [ib_core] Dec 2 17:13:53 manet kernel: ib_cq_poll_work+0x26/0x70 [ib_core] Dec 2 17:13:53 manet kernel: process_one_work+0x19d/0x2cd Dec 2 17:13:53 manet kernel: ? cancel_delayed_work_sync+0xf/0xf Dec 2 17:13:53 manet kernel: worker_thread+0x1a6/0x25a Dec 2 17:13:53 manet kernel: ? cancel_delayed_work_sync+0xf/0xf Dec 2 17:13:53 manet kernel: kthread+0xf4/0xf9 Dec 2 17:13:53 manet kernel: ? kthread_queue_delayed_work+0x74/0x74 Dec 2 17:13:53 manet kernel: ret_from_fork+0x24/0x30 The proximal cause is that this rpcrdma_rep has a rr_rdmabuf that is still pointing to the old ib_device, which has been freed. The only way that is possible is if this rpcrdma_rep was not destroyed by rpcrdma_ia_remove. Debugging showed that was indeed the case: this rpcrdma_rep was still in use by a completing RPC at the time of the device removal, and thus wasn't on the rep free list. So, it was not found by rpcrdma_reps_destroy(). The fix is to introduce a list of all rpcrdma_reps so that they all can be found when a device is removed. That list is used to perform only regbuf DMA unmapping, replacing that call to rpcrdma_reps_destroy(). Meanwhile, to prevent corruption of this list, I've moved the destruction of temp rpcrdma_rep objects to rpcrdma_post_recvs(). rpcrdma_xprt_drain() ensures that post_recvs (and thus rep_destroy) is not invoked while rpcrdma_reps_unmap is walking rb_all_reps, thus protecting the rb_all_reps list. Fixes: b0b227f071a0 ("xprtrdma: Use an llist to manage free rpcrdma_reps") Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> | 14 January 2020, 18:30:24 UTC |
| 13cb886 | Chuck Lever | 03 January 2020, 16:52:17 UTC | xprtrdma: Fix completion wait during device removal I've found that on occasion, "rmmod <dev>" will hang while if an NFS is under load. Ensure that ri_remove_done is initialized only just before the transport is woken up to force a close. This avoids the completion possibly getting initialized again while the CM event handler is waiting for a wake-up. Fixes: bebd031866ca ("xprtrdma: Support unplugging an HCA from under an NFS mount") Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> | 14 January 2020, 18:30:24 UTC |
| b32b9ed | Chuck Lever | 03 January 2020, 16:52:12 UTC | xprtrdma: Fix create_qp crash on device unload On device re-insertion, the RDMA device driver crashes trying to set up a new QP: Nov 27 16:32:06 manet kernel: BUG: kernel NULL pointer dereference, address: 00000000000001c0 Nov 27 16:32:06 manet kernel: #PF: supervisor write access in kernel mode Nov 27 16:32:06 manet kernel: #PF: error_code(0x0002) - not-present page Nov 27 16:32:06 manet kernel: PGD 0 P4D 0 Nov 27 16:32:06 manet kernel: Oops: 0002 [#1] SMP Nov 27 16:32:06 manet kernel: CPU: 1 PID: 345 Comm: kworker/u28:0 Tainted: G W 5.4.0 #852 Nov 27 16:32:06 manet kernel: Hardware name: Supermicro SYS-6028R-T/X10DRi, BIOS 1.1a 10/16/2015 Nov 27 16:32:06 manet kernel: Workqueue: xprtiod xprt_rdma_connect_worker [rpcrdma] Nov 27 16:32:06 manet kernel: RIP: 0010:atomic_try_cmpxchg+0x2/0x12 Nov 27 16:32:06 manet kernel: Code: ff ff 48 8b 04 24 5a c3 c6 07 00 0f 1f 40 00 c3 31 c0 48 81 ff 08 09 68 81 72 0c 31 c0 48 81 ff 83 0c 68 81 0f 92 c0 c3 8b 06 <f0> 0f b1 17 0f 94 c2 84 d2 75 02 89 06 88 d0 c3 53 ba 01 00 00 00 Nov 27 16:32:06 manet kernel: RSP: 0018:ffffc900035abbf0 EFLAGS: 00010046 Nov 27 16:32:06 manet kernel: RAX: 0000000000000000 RBX: 00000000000001c0 RCX: 0000000000000000 Nov 27 16:32:06 manet kernel: RDX: 0000000000000001 RSI: ffffc900035abbfc RDI: 00000000000001c0 Nov 27 16:32:06 manet kernel: RBP: ffffc900035abde0 R08: 000000000000000e R09: ffffffffffffc000 Nov 27 16:32:06 manet kernel: R10: 0000000000000000 R11: 000000000002e800 R12: ffff88886169d9f8 Nov 27 16:32:06 manet kernel: R13: ffff88886169d9f4 R14: 0000000000000246 R15: 0000000000000000 Nov 27 16:32:06 manet kernel: FS: 0000000000000000(0000) GS:ffff88846fa40000(0000) knlGS:0000000000000000 Nov 27 16:32:06 manet kernel: CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 Nov 27 16:32:06 manet kernel: CR2: 00000000000001c0 CR3: 0000000002009006 CR4: 00000000001606e0 Nov 27 16:32:06 manet kernel: Call Trace: Nov 27 16:32:06 manet kernel: do_raw_spin_lock+0x2f/0x5a Nov 27 16:32:06 manet kernel: create_qp_common.isra.47+0x856/0xadf [mlx4_ib] Nov 27 16:32:06 manet kernel: ? slab_post_alloc_hook.isra.60+0xa/0x1a Nov 27 16:32:06 manet kernel: ? __kmalloc+0x125/0x139 Nov 27 16:32:06 manet kernel: mlx4_ib_create_qp+0x57f/0x972 [mlx4_ib] The fix is to copy the qp_init_attr struct that was just created by rpcrdma_ep_create() instead of using the one from the previous connection instance. Fixes: 98ef77d1aaa7 ("xprtrdma: Send Queue size grows after a reconnect") Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> | 14 January 2020, 18:30:24 UTC |
| 452424c | Linus Torvalds | 14 January 2020, 18:22:10 UTC | Merge branch 'parisc-5.5-3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux Pull parisc fixes from Helge Deller: "A boot crash fix by Mike Rapoport and a printk fix by Krzysztof Kozlowski" * 'parisc-5.5-3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: fix map_pages() to actually populate upper directory parisc: Use proper printk format for resource_size_t | 14 January 2020, 18:22:10 UTC |
| 6737399 | Linus Torvalds | 14 January 2020, 18:17:15 UTC | Merge tag 'asm-generic-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/playground Pull asm-generic fixes from Arnd Bergmann: "Here are two bugfixes from Mike Rapoport, both fixing compile-time errors for the nds32 architecture that were recently introduced" * tag 'asm-generic-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/playground: nds32: fix build failure caused by page table folding updates asm-generic/nds32: don't redefine cacheflush primitives | 14 January 2020, 18:17:15 UTC |
| c21ed4d | Linus Torvalds | 14 January 2020, 18:14:06 UTC | Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "Two simple fixes in the upper drivers (so both fairly core), one in enclosures, which fixes replugging a device into an enclosure slot and one in the disk driver which fixes revalidating a drive with protection information (PI) to make it a non-PI drive ... previously we were still remembering the old PI state. Both fixed issues are quite rare in the field" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: enclosure: Fix stale device oops with hot replug scsi: sd: Clear sdkp->protection_type if disk is reformatted without PI | 14 January 2020, 18:14:06 UTC |
| e033e7d | Linus Torvalds | 14 January 2020, 17:56:31 UTC | Merge branch 'dhowells' (patches from DavidH) Merge misc fixes from David Howells. Two afs fixes and a key refcounting fix. * dhowells: afs: Fix afs_lookup() to not clobber the version on a new dentry afs: Fix use-after-loss-of-ref keys: Fix request_key() cache | 14 January 2020, 17:56:31 UTC |
| f52b83b | David Howells | 14 January 2020, 16:16:54 UTC | afs: Fix afs_lookup() to not clobber the version on a new dentry Fix afs_lookup() to not clobber the version set on a new dentry by afs_do_lookup() - especially as it's using the wrong version of the version (we need to use the one given to us by whatever op the dir contents correspond to rather than what's in the afs_vnode). Fixes: 9dd0b82ef530 ("afs: Fix missing dentry data version updating") Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 14 January 2020, 17:40:06 UTC |
| 40a708b | David Howells | 14 January 2020, 16:16:25 UTC | afs: Fix use-after-loss-of-ref afs_lookup() has a tracepoint to indicate the outcome of d_splice_alias(), passing it the inode to retrieve the fid from. However, the function gave up its ref on that inode when it called d_splice_alias(), which may have failed and dropped the inode. Fix this by caching the fid. Fixes: 80548b03991f ("afs: Add more tracepoints") Reported-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 14 January 2020, 17:40:06 UTC |
| 8379bb8 | David Howells | 14 January 2020, 16:06:14 UTC | keys: Fix request_key() cache When the key cached by request_key() and co. is cleaned up on exit(), the code looks in the wrong task_struct, and so clears the wrong cache. This leads to anomalies in key refcounting when doing, say, a kernel build on an afs volume, that then trigger kasan to report a use-after-free when the key is viewed in /proc/keys. Fix this by making exit_creds() look in the passed-in task_struct rather than in current (the task_struct cleanup code is deferred by RCU and potentially run in another task). Fixes: 7743c48e54ee ("keys: Cache result of request_key*() temporarily in task_struct") Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 14 January 2020, 17:40:06 UTC |
| 3f1f9a9 | Linus Torvalds | 14 January 2020, 17:22:51 UTC | Merge branch 'akpm' (patches from Andrew) Merge misc fixes from Andrew Morton: "11 mm fixes" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: mm: khugepaged: add trace status description for SCAN_PAGE_HAS_PRIVATE mm: memcg/slab: call flush_memcg_workqueue() only if memcg workqueue is valid mm/page-writeback.c: improve arithmetic divisions mm/page-writeback.c: use div64_ul() for u64-by-unsigned-long divide mm/page-writeback.c: avoid potential division by zero in wb_min_max_ratio() mm, debug_pagealloc: don't rely on static keys too early mm: memcg/slab: fix percpu slab vmstats flushing mm/shmem.c: thp, shmem: fix conflict of above-47bit hint address and PMD alignment mm/huge_memory.c: thp: fix conflict of above-47bit hint address and PMD alignment mm/memory_hotplug: don't free usage map when removing a re-added early section mm, thp: tweak reclaim/compaction effort of local-only and all-node allocations | 14 January 2020, 17:22:51 UTC |
| 8b7f938 | Mike Rapoport | 08 January 2020, 12:58:52 UTC | parisc: fix map_pages() to actually populate upper directory The commit d96885e277b5 ("parisc: use pgtable-nopXd instead of 4level-fixup") converted PA-RISC to use folded page tables, but it missed the conversion of pgd_populate() to pud_populate() in maps_pages() function. This caused the upper page table directory to remain empty and the system would crash as a result. Using pud_populate() that actually populates the page table instead of dummy pgd_populate() fixes the issue. Fixes: d96885e277b5 ("parisc: use pgtable-nopXd instead of 4level-fixup") Reported-by: Meelis Roos <mroos@linux.ee> Reported-by: Jeroen Roovers <jer@gentoo.org> Reported-by: Mikulas Patocka <mpatocka@redhat.com> Tested-by: Jeroen Roovers <jer@gentoo.org> Tested-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Helge Deller <deller@gmx.de> | 14 January 2020, 08:18:39 UTC |
| 4f80b70 | Krzysztof Kozlowski | 03 January 2020, 16:39:25 UTC | parisc: Use proper printk format for resource_size_t resource_size_t should be printed with its own size-independent format to fix warnings when compiling on 64-bit platform (e.g. with COMPILE_TEST): arch/parisc/kernel/drivers.c: In function 'print_parisc_device': arch/parisc/kernel/drivers.c:892:9: warning: format '%p' expects argument of type 'void *', but argument 4 has type 'resource_size_t {aka unsigned int}' [-Wformat=] Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Helge Deller <deller@gmx.de> | 14 January 2020, 08:17:59 UTC |
| 63d264f | Linus Torvalds | 14 January 2020, 02:40:57 UTC | Merge tag 'Intel-CVE-2019-14615' from bundle by Akeem Abodunrin. Merge Intel Gen9 graphics fix from Akeem Abodunrin: "Insufficient control flow in certain data structures for some Intel Processors with Intel Processor Graphics may allow an unauthenticated user to potentially enable information disclosure via local access This provides mitigation for Gen9 hardware. Note that Gen8 is not impacted due to a previously implemented workaround. The mitigation involves using an existing hardware feature to forcibly clear down all EU state at each context switch" * tag 'Intel-CVE-2019-14615' of emailed bundle from Akeem G Abodunrin <akeem.g.abodunrin@intel.com>: drm/i915/gen9: Clear residual context state on context switch | 14 January 2020, 02:40:57 UTC |
| 554913f | Yang Shi | 14 January 2020, 00:29:36 UTC | mm: khugepaged: add trace status description for SCAN_PAGE_HAS_PRIVATE Commit 99cb0dbd47a1 ("mm,thp: add read-only THP support for (non-shmem) FS") introduced a new khugepaged scan result: SCAN_PAGE_HAS_PRIVATE, but the corresponding description for trace events were not added. Link: http://lkml.kernel.org/r/1574793844-2914-1-git-send-email-yang.shi@linux.alibaba.com Fixes: 99cb0dbd47a1 ("mm,thp: add read-only THP support for (non-shmem) FS") Signed-off-by: Yang Shi <yang.shi@linux.alibaba.com> Cc: Song Liu <songliubraving@fb.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 14 January 2020, 02:19:02 UTC |
| 2fe2021 | Adrian Huang | 14 January 2020, 00:29:32 UTC | mm: memcg/slab: call flush_memcg_workqueue() only if memcg workqueue is valid When booting with amd_iommu=off, the following WARNING message appears: AMD-Vi: AMD IOMMU disabled on kernel command-line ------------[ cut here ]------------ WARNING: CPU: 0 PID: 0 at kernel/workqueue.c:2772 flush_workqueue+0x42e/0x450 Modules linked in: CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.5.0-rc3-amd-iommu #6 Hardware name: Lenovo ThinkSystem SR655-2S/7D2WRCZ000, BIOS D8E101L-1.00 12/05/2019 RIP: 0010:flush_workqueue+0x42e/0x450 Code: ff 0f 0b e9 7a fd ff ff 4d 89 ef e9 33 fe ff ff 0f 0b e9 7f fd ff ff 0f 0b e9 bc fd ff ff 0f 0b e9 a8 fd ff ff e8 52 2c fe ff <0f> 0b 31 d2 48 c7 c6 e0 88 c5 95 48 c7 c7 d8 ad f0 95 e8 19 f5 04 Call Trace: kmem_cache_destroy+0x69/0x260 iommu_go_to_state+0x40c/0x5ab amd_iommu_prepare+0x16/0x2a irq_remapping_prepare+0x36/0x5f enable_IR_x2apic+0x21/0x172 default_setup_apic_routing+0x12/0x6f apic_intr_mode_init+0x1a1/0x1f1 x86_late_time_init+0x17/0x1c start_kernel+0x480/0x53f secondary_startup_64+0xb6/0xc0 ---[ end trace 30894107c3749449 ]--- x2apic: IRQ remapping doesn't support X2APIC mode x2apic disabled The warning is caused by the calling of 'kmem_cache_destroy()' in free_iommu_resources(). Here is the call path: free_iommu_resources kmem_cache_destroy flush_memcg_workqueue flush_workqueue The root cause is that the IOMMU subsystem runs before the workqueue subsystem, which the variable 'wq_online' is still 'false'. This leads to the statement 'if (WARN_ON(!wq_online))' in flush_workqueue() is 'true'. Since the variable 'memcg_kmem_cache_wq' is not allocated during the time, it is unnecessary to call flush_memcg_workqueue(). This prevents the WARNING message triggered by flush_workqueue(). Link: http://lkml.kernel.org/r/20200103085503.1665-1-ahuang12@lenovo.com Fixes: 92ee383f6daab ("mm: fix race between kmem_cache destroy, create and deactivate") Signed-off-by: Adrian Huang <ahuang12@lenovo.com> Reported-by: Xiaochun Lee <lixc17@lenovo.com> Reviewed-by: Shakeel Butt <shakeelb@google.com> Cc: Joerg Roedel <jroedel@suse.de> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 14 January 2020, 02:19:02 UTC |
| 0a5d1a7 | Wen Yang | 14 January 2020, 00:29:29 UTC | mm/page-writeback.c: improve arithmetic divisions Use div64_ul() instead of do_div() if the divisor is unsigned long, to avoid truncation to 32-bit on 64-bit platforms. Link: http://lkml.kernel.org/r/20200102081442.8273-4-wenyang@linux.alibaba.com Signed-off-by: Wen Yang <wenyang@linux.alibaba.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Qian Cai <cai@lca.pw> Cc: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 14 January 2020, 02:19:02 UTC |
| d3ac946 | Wen Yang | 14 January 2020, 00:29:26 UTC | mm/page-writeback.c: use div64_ul() for u64-by-unsigned-long divide The two variables 'numerator' and 'denominator', though they are declared as long, they should actually be unsigned long (according to the implementation of the fprop_fraction_percpu() function) And do_div() does a 64-by-32 division, while the divisor 'denominator' is unsigned long, thus 64-bit on 64-bit platforms. Hence the proper function to call is div64_ul(). Link: http://lkml.kernel.org/r/20200102081442.8273-3-wenyang@linux.alibaba.com Signed-off-by: Wen Yang <wenyang@linux.alibaba.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Qian Cai <cai@lca.pw> Cc: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 14 January 2020, 02:19:02 UTC |
| 6d9e8c6 | Wen Yang | 14 January 2020, 00:29:23 UTC | mm/page-writeback.c: avoid potential division by zero in wb_min_max_ratio() Patch series "use div64_ul() instead of div_u64() if the divisor is unsigned long". We were first inspired by commit b0ab99e7736a ("sched: Fix possible divide by zero in avg_atom () calculation"), then refer to the recently analyzed mm code, we found this suspicious place. 201 if (min) { 202 min *= this_bw; 203 do_div(min, tot_bw); 204 } And we also disassembled and confirmed it: /usr/src/debug/kernel-4.9.168-016.ali3000/linux-4.9.168-016.ali3000.alios7.x86_64/mm/page-writeback.c: 201 0xffffffff811c37da <__wb_calc_thresh+234>: xor %r10d,%r10d 0xffffffff811c37dd <__wb_calc_thresh+237>: test %rax,%rax 0xffffffff811c37e0 <__wb_calc_thresh+240>: je 0xffffffff811c3800 <__wb_calc_thresh+272> /usr/src/debug/kernel-4.9.168-016.ali3000/linux-4.9.168-016.ali3000.alios7.x86_64/mm/page-writeback.c: 202 0xffffffff811c37e2 <__wb_calc_thresh+242>: imul %r8,%rax /usr/src/debug/kernel-4.9.168-016.ali3000/linux-4.9.168-016.ali3000.alios7.x86_64/mm/page-writeback.c: 203 0xffffffff811c37e6 <__wb_calc_thresh+246>: mov %r9d,%r10d ---> truncates it to 32 bits here 0xffffffff811c37e9 <__wb_calc_thresh+249>: xor %edx,%edx 0xffffffff811c37eb <__wb_calc_thresh+251>: div %r10 0xffffffff811c37ee <__wb_calc_thresh+254>: imul %rbx,%rax 0xffffffff811c37f2 <__wb_calc_thresh+258>: shr $0x2,%rax 0xffffffff811c37f6 <__wb_calc_thresh+262>: mul %rcx 0xffffffff811c37f9 <__wb_calc_thresh+265>: shr $0x2,%rdx 0xffffffff811c37fd <__wb_calc_thresh+269>: mov %rdx,%r10 This series uses div64_ul() instead of div_u64() if the divisor is unsigned long, to avoid truncation to 32-bit on 64-bit platforms. This patch (of 3): The variables 'min' and 'max' are unsigned long and do_div truncates them to 32 bits, which means it can test non-zero and be truncated to zero for division. Fix this issue by using div64_ul() instead. Link: http://lkml.kernel.org/r/20200102081442.8273-2-wenyang@linux.alibaba.com Fixes: 693108a8a667 ("writeback: make bdi->min/max_ratio handling cgroup writeback aware") Signed-off-by: Wen Yang <wenyang@linux.alibaba.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Qian Cai <cai@lca.pw> Cc: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 14 January 2020, 02:19:02 UTC |
| 8e57f8a | Vlastimil Babka | 14 January 2020, 00:29:20 UTC | mm, debug_pagealloc: don't rely on static keys too early Commit 96a2b03f281d ("mm, debug_pagelloc: use static keys to enable debugging") has introduced a static key to reduce overhead when debug_pagealloc is compiled in but not enabled. It relied on the assumption that jump_label_init() is called before parse_early_param() as in start_kernel(), so when the "debug_pagealloc=on" option is parsed, it is safe to enable the static key. However, it turns out multiple architectures call parse_early_param() earlier from their setup_arch(). x86 also calls jump_label_init() even earlier, so no issue was found while testing the commit, but same is not true for e.g. ppc64 and s390 where the kernel would not boot with debug_pagealloc=on as found by our QA. To fix this without tricky changes to init code of multiple architectures, this patch partially reverts the static key conversion from 96a2b03f281d. Init-time and non-fastpath calls (such as in arch code) of debug_pagealloc_enabled() will again test a simple bool variable. Fastpath mm code is converted to a new debug_pagealloc_enabled_static() variant that relies on the static key, which is enabled in a well-defined point in mm_init() where it's guaranteed that jump_label_init() has been called, regardless of architecture. [sfr@canb.auug.org.au: export _debug_pagealloc_enabled_early] Link: http://lkml.kernel.org/r/20200106164944.063ac07b@canb.auug.org.au Link: http://lkml.kernel.org/r/20191219130612.23171-1-vbabka@suse.cz Fixes: 96a2b03f281d ("mm, debug_pagelloc: use static keys to enable debugging") Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Matthew Wilcox <willy@infradead.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Qian Cai <cai@lca.pw> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 14 January 2020, 02:19:02 UTC |
| 4a87e2a | Roman Gushchin | 14 January 2020, 00:29:16 UTC | mm: memcg/slab: fix percpu slab vmstats flushing Currently slab percpu vmstats are flushed twice: during the memcg offlining and just before freeing the memcg structure. Each time percpu counters are summed, added to the atomic counterparts and propagated up by the cgroup tree. The second flushing is required due to how recursive vmstats are implemented: counters are batched in percpu variables on a local level, and once a percpu value is crossing some predefined threshold, it spills over to atomic values on the local and each ascendant levels. It means that without flushing some numbers cached in percpu variables will be dropped on floor each time a cgroup is destroyed. And with uptime the error on upper levels might become noticeable. The first flushing aims to make counters on ancestor levels more precise. Dying cgroups may resume in the dying state for a long time. After kmem_cache reparenting which is performed during the offlining slab counters of the dying cgroup don't have any chances to be updated, because any slab operations will be performed on the parent level. It means that the inaccuracy caused by percpu batching will not decrease up to the final destruction of the cgroup. By the original idea flushing slab counters during the offlining should minimize the visible inaccuracy of slab counters on the parent level. The problem is that percpu counters are not zeroed after the first flushing. So every cached percpu value is summed twice. It creates a small error (up to 32 pages per cpu, but usually less) which accumulates on parent cgroup level. After creating and destroying of thousands of child cgroups, slab counter on parent level can be way off the real value. For now, let's just stop flushing slab counters on memcg offlining. It can't be done correctly without scheduling a work on each cpu: reading and zeroing it during css offlining can race with an asynchronous update, which doesn't expect values to be changed underneath. With this change, slab counters on parent level will become eventually consistent. Once all dying children are gone, values are correct. And if not, the error is capped by 32 * NR_CPUS pages per dying cgroup. It's not perfect, as slab are reparented, so any updates after the reparenting will happen on the parent level. It means that if a slab page was allocated, a counter on child level was bumped, then the page was reparented and freed, the annihilation of positive and negative counter values will not happen until the child cgroup is released. It makes slab counters different from others, and it might want us to implement flushing in a correct form again. But it's also a question of performance: scheduling a work on each cpu isn't free, and it's an open question if the benefit of having more accurate counters is worth it. We might also consider flushing all counters on offlining, not only slab counters. So let's fix the main problem now: make the slab counters eventually consistent, so at least the error won't grow with uptime (or more precisely the number of created and destroyed cgroups). And think about the accuracy of counters separately. Link: http://lkml.kernel.org/r/20191220042728.1045881-1-guro@fb.com Fixes: bee07b33db78 ("mm: memcontrol: flush percpu slab vmstats on kmem offlining") Signed-off-by: Roman Gushchin <guro@fb.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Michal Hocko <mhocko@suse.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 14 January 2020, 02:19:02 UTC |
| 9915899 | Kirill A. Shutemov | 14 January 2020, 00:29:13 UTC | mm/shmem.c: thp, shmem: fix conflict of above-47bit hint address and PMD alignment Shmem/tmpfs tries to provide THP-friendly mappings if huge pages are enabled. But it doesn't work well with above-47bit hint address. Normally, the kernel doesn't create userspace mappings above 47-bit, even if the machine allows this (such as with 5-level paging on x86-64). Not all user space is ready to handle wide addresses. It's known that at least some JIT compilers use higher bits in pointers to encode their information. Userspace can ask for allocation from full address space by specifying hint address (with or without MAP_FIXED) above 47-bits. If the application doesn't need a particular address, but wants to allocate from whole address space it can specify -1 as a hint address. Unfortunately, this trick breaks THP alignment in shmem/tmp: shmem_get_unmapped_area() would not try to allocate PMD-aligned area if *any* hint address specified. This can be fixed by requesting the aligned area if the we failed to allocated at user-specified hint address. The request with inflated length will also take the user-specified hint address. This way we will not lose an allocation request from the full address space. [kirill@shutemov.name: fold in a fixup] Link: http://lkml.kernel.org/r/20191223231309.t6bh5hkbmokihpfu@box Link: http://lkml.kernel.org/r/20191220142548.7118-3-kirill.shutemov@linux.intel.com Fixes: b569bab78d8d ("x86/mm: Prepare to expose larger address space to userspace") Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: "Willhalm, Thomas" <thomas.willhalm@intel.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: "Bruggeman, Otto G" <otto.g.bruggeman@intel.com> Cc: "Aneesh Kumar K . V" <aneesh.kumar@linux.vnet.ibm.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 14 January 2020, 02:19:01 UTC |
| 97d3d0f | Kirill A. Shutemov | 14 January 2020, 00:29:10 UTC | mm/huge_memory.c: thp: fix conflict of above-47bit hint address and PMD alignment Patch series "Fix two above-47bit hint address vs. THP bugs". The two get_unmapped_area() implementations have to be fixed to provide THP-friendly mappings if above-47bit hint address is specified. This patch (of 2): Filesystems use thp_get_unmapped_area() to provide THP-friendly mappings. For DAX in particular. Normally, the kernel doesn't create userspace mappings above 47-bit, even if the machine allows this (such as with 5-level paging on x86-64). Not all user space is ready to handle wide addresses. It's known that at least some JIT compilers use higher bits in pointers to encode their information. Userspace can ask for allocation from full address space by specifying hint address (with or without MAP_FIXED) above 47-bits. If the application doesn't need a particular address, but wants to allocate from whole address space it can specify -1 as a hint address. Unfortunately, this trick breaks thp_get_unmapped_area(): the function would not try to allocate PMD-aligned area if *any* hint address specified. Modify the routine to handle it correctly: - Try to allocate the space at the specified hint address with length padding required for PMD alignment. - If failed, retry without length padding (but with the same hint address); - If the returned address matches the hint address return it. - Otherwise, align the address as required for THP and return. The user specified hint address is passed down to get_unmapped_area() so above-47bit hint address will be taken into account without breaking alignment requirements. Link: http://lkml.kernel.org/r/20191220142548.7118-2-kirill.shutemov@linux.intel.com Fixes: b569bab78d8d ("x86/mm: Prepare to expose larger address space to userspace") Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Reported-by: Thomas Willhalm <thomas.willhalm@intel.com> Tested-by: Dan Williams <dan.j.williams@intel.com> Cc: "Aneesh Kumar K . V" <aneesh.kumar@linux.vnet.ibm.com> Cc: "Bruggeman, Otto G" <otto.g.bruggeman@intel.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 14 January 2020, 02:19:01 UTC |
| 8068df3 | David Hildenbrand | 14 January 2020, 00:29:07 UTC | mm/memory_hotplug: don't free usage map when removing a re-added early section When we remove an early section, we don't free the usage map, as the usage maps of other sections are placed into the same page. Once the section is removed, it is no longer an early section (especially, the memmap is freed). When we re-add that section, the usage map is reused, however, it is no longer an early section. When removing that section again, we try to kfree() a usage map that was allocated during early boot - bad. Let's check against PageReserved() to see if we are dealing with an usage map that was allocated during boot. We could also check against !(PageSlab(usage_page) || PageCompound(usage_page)), but PageReserved() is cleaner. Can be triggered using memtrace under ppc64/powernv: $ mount -t debugfs none /sys/kernel/debug/ $ echo 0x20000000 > /sys/kernel/debug/powerpc/memtrace/enable $ echo 0x20000000 > /sys/kernel/debug/powerpc/memtrace/enable ------------[ cut here ]------------ kernel BUG at mm/slub.c:3969! Oops: Exception in kernel mode, sig: 5 [#1] LE PAGE_SIZE=3D64K MMU=3DHash SMP NR_CPUS=3D2048 NUMA PowerNV Modules linked in: CPU: 0 PID: 154 Comm: sh Not tainted 5.5.0-rc2-next-20191216-00005-g0be1dba7b7c0 #61 NIP kfree+0x338/0x3b0 LR section_deactivate+0x138/0x200 Call Trace: section_deactivate+0x138/0x200 __remove_pages+0x114/0x150 arch_remove_memory+0x3c/0x160 try_remove_memory+0x114/0x1a0 __remove_memory+0x20/0x40 memtrace_enable_set+0x254/0x850 simple_attr_write+0x138/0x160 full_proxy_write+0x8c/0x110 __vfs_write+0x38/0x70 vfs_write+0x11c/0x2a0 ksys_write+0x84/0x140 system_call+0x5c/0x68 ---[ end trace 4b053cbd84e0db62 ]--- The first invocation will offline+remove memory blocks. The second invocation will first add+online them again, in order to offline+remove them again (usually we are lucky and the exact same memory blocks will get "reallocated"). Tested on powernv with boot memory: The usage map will not get freed. Tested on x86-64 with DIMMs: The usage map will get freed. Using Dynamic Memory under a Power DLAPR can trigger it easily. Triggering removal (I assume after previously removed+re-added) of memory from the HMC GUI can crash the kernel with the same call trace and is fixed by this patch. Link: http://lkml.kernel.org/r/20191217104637.5509-1-david@redhat.com Fixes: 326e1b8f83a4 ("mm/sparsemem: introduce a SECTION_IS_EARLY flag") Signed-off-by: David Hildenbrand <david@redhat.com> Tested-by: Pingfan Liu <piliu@redhat.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: Michal Hocko <mhocko@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 14 January 2020, 02:19:01 UTC |
| cc638f3 | Vlastimil Babka | 14 January 2020, 00:29:04 UTC | mm, thp: tweak reclaim/compaction effort of local-only and all-node allocations THP page faults now attempt a __GFP_THISNODE allocation first, which should only compact existing free memory, followed by another attempt that can allocate from any node using reclaim/compaction effort specified by global defrag setting and madvise. This patch makes the following changes to the scheme: - Before the patch, the first allocation relies on a check for pageblock order and __GFP_IO to prevent excessive reclaim. This however affects also the second attempt, which is not limited to single node. Instead of that, reuse the existing check for costly order __GFP_NORETRY allocations, and make sure the first THP attempt uses __GFP_NORETRY. As a side-effect, all costly order __GFP_NORETRY allocations will bail out if compaction needs reclaim, while previously they only bailed out when compaction was deferred due to previous failures. This should be still acceptable within the __GFP_NORETRY semantics. - Before the patch, the second allocation attempt (on all nodes) was passing __GFP_NORETRY. This is redundant as the check for pageblock order (discussed above) was stronger. It's also contrary to madvise(MADV_HUGEPAGE) which means some effort to allocate THP is requested. After this patch, the second attempt doesn't pass __GFP_THISNODE nor __GFP_NORETRY. To sum up, THP page faults now try the following attempts: 1. local node only THP allocation with no reclaim, just compaction. 2. for madvised VMA's or when synchronous compaction is enabled always - THP allocation from any node with effort determined by global defrag setting and VMA madvise 3. fallback to base pages on any node Link: http://lkml.kernel.org/r/08a3f4dd-c3ce-0009-86c5-9ee51aba8557@suse.cz Fixes: b39d0ee2632d ("mm, page_alloc: avoid expensive reclaim when compaction may not succeed") Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Cc: David Rientjes <rientjes@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 14 January 2020, 02:19:01 UTC |
| b3a987b | Linus Torvalds | 13 January 2020, 00:55:08 UTC | Linux 5.5-rc6 | 13 January 2020, 00:55:08 UTC |
| 373adb7 | Linus Torvalds | 13 January 2020, 00:48:39 UTC | Merge tag 'riscv/for-v5.5-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux Pull RISC-V fixes from Paul Walmsley: "Two fixes for RISC-V: - Clear FP registers during boot when FP support is present, rather than when they aren't present - Move the header files associated with the SiFive L2 cache controller to drivers/soc (where the code was recently moved)" * tag 'riscv/for-v5.5-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: riscv: Fixup obvious bug for fp-regs reset riscv: move sifive_l2_cache.h to include/soc | 13 January 2020, 00:48:39 UTC |
| dc6fcba | Guo Ren | 05 January 2020, 02:52:14 UTC | riscv: Fixup obvious bug for fp-regs reset CSR_MISA is defined in Privileged Architectures' spec: 3.1.1 Machine ISA Register misa. Every bit:1 indicate a feature, so we should beqz reset_done when there is no F/D bit in csr_misa register. Signed-off-by: Guo Ren <ren_guo@c-sky.com> [paul.walmsley@sifive.com: fix typo in commit message] Fixes: 9e80635619b51 ("riscv: clear the instruction cache and all registers when booting") Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com> | 12 January 2020, 18:12:44 UTC |
| 13cf4cf | Yash Shah | 08 January 2020, 06:09:06 UTC | riscv: move sifive_l2_cache.h to include/soc The commit 9209fb51896f ("riscv: move sifive_l2_cache.c to drivers/soc") moves the sifive L2 cache driver to driver/soc. It did not move the header file along with the driver. Therefore this patch moves the header file to driver/soc Signed-off-by: Yash Shah <yash.shah@sifive.com> Reviewed-by: Anup Patel <anup@brainfault.org> [paul.walmsley@sifive.com: updated to fix the include guard] Fixes: 9209fb51896f ("riscv: move sifive_l2_cache.c to drivers/soc") Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com> | 12 January 2020, 18:12:44 UTC |
| 040a3c3 | Linus Torvalds | 12 January 2020, 17:35:42 UTC | Merge tag 'iommu-fixes-v5.5-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu Pull iommu fixes from Joerg Roedel: - Two fixes for VT-d and generic IOMMU code to fix teardown on error handling code paths. - Patch for the Intel VT-d driver to fix handling of non-PCI devices - Fix W=1 compile warning in dma-iommu code * tag 'iommu-fixes-v5.5-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: iommu/dma: fix variable 'cookie' set but not used iommu/vt-d: Unlink device if failed to add to group iommu: Remove device link to group on failure iommu/vt-d: Fix adding non-PCI devices to Intel IOMMU | 12 January 2020, 17:35:42 UTC |
| 6327edc | Linus Torvalds | 11 January 2020, 23:40:43 UTC | Merge branch 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c fixes from Wolfram Sang: "Two driver bugfixes, a documentation fix, and a removal of a spec violation for the bus recovery algorithm in the core" * 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: fix bus recovery stop mode timing i2c: bcm2835: Store pointer to bus clock dt-bindings: i2c: at91: fix i2c-sda-hold-time-ns documentation for sam9x60 i2c: at91: fix clk_offset for sam9x60 | 11 January 2020, 23:40:43 UTC |
| 606e9ad | Linus Torvalds | 11 January 2020, 23:33:48 UTC | Merge tag 'clone3-tls-v5.5-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux Pull thread fixes from Christian Brauner: "This contains a series of patches to fix CLONE_SETTLS when used with clone3(). The clone3() syscall passes the tls argument through struct clone_args instead of a register. This means, all architectures that do not implement copy_thread_tls() but still support CLONE_SETTLS via copy_thread() expecting the tls to be located in a register argument based on clone() are currently unfortunately broken. Their tls value will be garbage. The patch series fixes this on all architectures that currently define __ARCH_WANT_SYS_CLONE3. It also adds a compile-time check to ensure that any architecture that enables clone3() in the future is forced to also implement copy_thread_tls(). My ultimate goal is to get rid of the copy_thread()/copy_thread_tls() split and just have copy_thread_tls() at some point in the not too distant future (Maybe even renaming copy_thread_tls() back to simply copy_thread() once the old function is ripped from all arches). This is dependent now on all arches supporting clone3(). While all relevant arches do that now there are still four missing: ia64, m68k, sh and sparc. They have the system call reserved, but not implemented. Once they all implement clone3() we can get rid of ARCH_WANT_SYS_CLONE3 and HAVE_COPY_THREAD_TLS. This series also includes a minor fix for the arm64 uapi headers which caused __NR_clone3 to be missing from the exported user headers. Unfortunately the series came in a little late especially given that it touches a range of architectures. Due to the holidays not all arch maintainers responded in time probably due to their backlog. Will and Arnd have thankfully acked the arm specific changes. Given that the changes are straightforward and rather minimal combined with the fact the that clone3() with CLONE_SETTLS is broken I decided to send them post rc3 nonetheless" * tag 'clone3-tls-v5.5-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux: um: Implement copy_thread_tls clone3: ensure copy_thread_tls is implemented xtensa: Implement copy_thread_tls riscv: Implement copy_thread_tls parisc: Implement copy_thread_tls arm: Implement copy_thread_tls arm64: Implement copy_thread_tls arm64: Move __ARCH_WANT_SYS_CLONE3 definition to uapi headers | 11 January 2020, 23:33:48 UTC |
| ac61145 | Linus Torvalds | 10 January 2020, 21:41:16 UTC | Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid Pull HID fix from Jiri Kosina: "A regression fix for EPOLLOUT handling in hidraw and uhid" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: HID: hidraw, uhid: Always report EPOLLOUT | 10 January 2020, 21:41:16 UTC |
| 213356f | Linus Torvalds | 10 January 2020, 21:29:40 UTC | Merge tag 'usb-5.5-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB/PHY fixes from Greg KH: "Here are a number of USB and PHY driver fixes for 5.5-rc6 Nothing all that unusual, just the a bunch of small fixes for a lot of different reported issues. The PHY driver fixes are in here as they interacted with the usb drivers. Full details of the patches are in the shortlog, and all of these have been in linux-next with no reported issues" * tag 'usb-5.5-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (24 commits) usb: missing parentheses in USE_NEW_SCHEME usb: ohci-da8xx: ensure error return on variable error is set usb: musb: Disable pullup at init usb: musb: fix idling for suspend after disconnect interrupt usb: typec: ucsi: Fix the notification bit offsets USB: Fix: Don't skip endpoint descriptors with maxpacket=0 USB-PD tcpm: bad warning+size, PPS adapters phy/rockchip: inno-hdmi: round clock rate down to closest 1000 Hz usb: chipidea: host: Disable port power only if previously enabled usb: cdns3: should not use the same dev_id for shared interrupt handler usb: dwc3: gadget: Fix request complete check usb: musb: dma: Correct parameter passed to IRQ handler usb: musb: jz4740: Silence error if code is -EPROBE_DEFER usb: udc: tegra: select USB_ROLE_SWITCH USB: core: fix check for duplicate endpoints phy: cpcap-usb: Drop extra write to usb2 register phy: cpcap-usb: Improve host vs docked mode detection phy: cpcap-usb: Prevent USB line glitches from waking up modem phy: mapphone-mdm6600: Fix uninitialized status value regression phy: cpcap-usb: Fix flakey host idling and enumerating of devices ... | 10 January 2020, 21:29:40 UTC |
| 9fb7007 | Linus Torvalds | 10 January 2020, 21:25:24 UTC | Merge tag 'char-misc-5.5-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc fix from Greg KH: "Here is a single fix, for the chrdev core, for 5.5-rc6 There's been a long-standing race condition triggered by syzbot, and occasionally real people, in the chrdev open() path. Will finally took the time to track it down and fix it for real before the holidays. Here's that one patch, it's been in linux-next for a while with no reported issues and it does fix the reported problem" * tag 'char-misc-5.5-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: chardev: Avoid potential use-after-free in 'chrdev_open()' | 10 January 2020, 21:25:24 UTC |
| 7da37cd | Linus Torvalds | 10 January 2020, 21:22:11 UTC | Merge tag 'staging-5.5-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging fixes from Greg KH: "Here are some small staging driver fixes for 5.5-rc6. Nothing major here, just some small fixes for a comedi driver, the vt6656 driver, and a new device id for the rtl8188eu driver. All of these have been in linux-next for a while with no reported issues" * tag 'staging-5.5-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: staging: rtl8188eu: Add device code for TP-Link TL-WN727N v5.21 staging: comedi: adv_pci1710: fix AI channels 16-31 for PCI-1713 staging: vt6656: set usb_set_intfdata on driver fail. staging: vt6656: remove bool from vnt_radio_power_on ret staging: vt6656: limit reg output to block size staging: vt6656: correct return of vnt_init_registers. staging: vt6656: Fix non zero logical return of, usb_control_msg | 10 January 2020, 21:22:11 UTC |
| 5a96c0b | Linus Torvalds | 10 January 2020, 21:17:21 UTC | Merge tag 'tty-5.5-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial fixes from Greg KH: "Here are two tty/serial driver fixes for 5.5-rc6. The first fixes a much much reported issue with a previous tty port link patch that is in your tree, and the second fixes a problem where the serdev driver would claim ACPI devices that it shouldn't be claiming. Both have been in linux-next for a while with no reported issues" * tag 'tty-5.5-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: serdev: Don't claim unsupported ACPI serial devices tty: always relink the port | 10 January 2020, 21:17:21 UTC |
| 4e4cd21 | Linus Torvalds | 10 January 2020, 20:05:26 UTC | Merge tag 'block-5.5-2020-01-10' of git://git.kernel.dk/linux-block Pull block fixes from Jens Axboe: "A few fixes that should go into this round. This pull request contains two NVMe fixes via Keith, removal of a dead function, and a fix for the bio op for read truncates (Ming)" * tag 'block-5.5-2020-01-10' of git://git.kernel.dk/linux-block: nvmet: fix per feat data len for get_feature nvme: Translate more status codes to blk_status_t fs: move guard_bio_eod() after bio_set_op_attrs block: remove unused mp_bvec_last_segment | 10 January 2020, 20:05:26 UTC |
| 30b6487 | Linus Torvalds | 10 January 2020, 20:03:12 UTC | Merge tag 'io_uring-5.5-2020-01-10' of git://git.kernel.dk/linux-block Pull io_uring fix from Jens Axboe: "Single fix for this series, fixing a regression with the short read handling. This just removes it, as it cannot safely be done for all cases" * tag 'io_uring-5.5-2020-01-10' of git://git.kernel.dk/linux-block: io_uring: remove punt of short reads to async context | 10 January 2020, 20:03:12 UTC |
| 4936ce1 | Linus Torvalds | 10 January 2020, 19:57:10 UTC | Merge tag 'mtd/fixes-for-5.5-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux Pull MTD fixes from Miquel Raynal: "MTD: - sm_ftl: Fix NULL pointer warning. Raw NAND: - Cadence: fix compile testing. - STM32: Avoid locking. Onenand: - Fix several sparse/build warnings. SPI-NOR: - Add a flag to fix interaction with Micron parts" * tag 'mtd/fixes-for-5.5-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: mtd: spi-nor: Fix the writing of the Status Register on micron flashes mtd: sm_ftl: fix NULL pointer warning mtd: onenand: omap2: Pass correct flags for prep_dma_memcpy mtd: onenand: samsung: Fix iomem access with regular memcpy mtd: onenand: omap2: Fix errors in style mtd: cadence: Fix cast to pointer from integer of different size warning mtd: rawnand: stm32_fmc2: avoid to lock the CPU bus | 10 January 2020, 19:57:10 UTC |
| b1d198c | Linus Torvalds | 10 January 2020, 19:52:36 UTC | Merge tag 'sound-5.5-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "A few piled ASoC fixes and usual HD-audio and USB-audio fixups. Some of them are for ASoC core error-handling" * tag 'sound-5.5-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: hda: enable regmap internal locking ALSA: hda/realtek - Add quirk for the bass speaker on Lenovo Yoga X1 7th gen ALSA: hda/realtek - Set EAPD control to default for ALC222 ALSA: usb-audio: Apply the sample rate quirk for Bose Companion 5 ALSA: hda/realtek - Add new codec supported for ALCS1200A ASoC: Intel: boards: Fix compile-testing RT1011/RT5682 ASoC: SOF: imx8: Fix dsp_box offset ASoC: topology: Prevent use-after-free in snd_soc_get_pcm_runtime() ASoC: fsl_audmix: add missed pm_runtime_disable ASoC: stm32: spdifrx: fix input pin state management ASoC: stm32: spdifrx: fix race condition in irq handler ASoC: stm32: spdifrx: fix inconsistent lock state ASoC: core: Fix access to uninitialized list heads ASoC: soc-core: Set dpcm_playback / dpcm_capture ASoC: SOF: imx8: fix memory allocation failure check on priv->pd_dev ASoC: SOF: Intel: hda: hda-dai: fix oops on hda_link .hw_free ASoC: SOF: fix fault at driver unload after failed probe | 10 January 2020, 19:52:36 UTC |
| 658e1af | Linus Torvalds | 10 January 2020, 19:48:37 UTC | Merge tag 'thermal-v5.5-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux Pull thermal fix from Daniel Lezcano: "Fix backward compatibility with old DTBs on QCOM tsens (Amit Kucheria)" * tag 'thermal-v5.5-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux: drivers: thermal: tsens: Work with old DTBs | 10 January 2020, 19:48:37 UTC |
| c23e744 | Linus Torvalds | 10 January 2020, 19:46:59 UTC | Merge tag 'pm-5.5-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management fixes from Rafael Wysocki: "Prevent the cpufreq-dt driver from probing Tegra20/30 (Dmitry Osipenko) and prevent the Intel RAPL power capping driver from crashing during CPU initialization due to a NULL pointer dereference if the processor model in use is not known to it (Harry Pan)" * tag 'pm-5.5-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: powercap: intel_rapl: add NULL pointer check to rapl_mmio_cpu_online() cpufreq: dt-platdev: Blacklist NVIDIA Tegra20 and Tegra30 SoCs | 10 January 2020, 19:46:59 UTC |
| e17016f | Amit Engel | 07 January 2020, 16:47:24 UTC | nvmet: fix per feat data len for get_feature The existing implementation for the get_feature admin-cmd does not use per-feature data len. This patch introduces a new helper function nvmet_feat_data_len(), which is used to calculate per feature data len. Right now we only set data len for fid 0x81 (NVME_FEAT_HOST_ID). Fixes: commit e9061c397839 ("nvmet: Remove the data_len field from the nvmet_req struct") Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Amit Engel <amit.engel@dell.com> [endiness, naming, and kernel style fixes] Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Signed-off-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk> | 10 January 2020, 15:55:50 UTC |
| 35038bf | Keith Busch | 05 December 2019, 19:50:44 UTC | nvme: Translate more status codes to blk_status_t Decode interrupted command and not ready namespace nvme status codes to BLK_STS_TARGET. These are not generic IO errors and should use a non-path specific error so that it can use the non-failover retry path. Reported-by: John Meneghini <John.Meneghini@netapp.com> Cc: Hannes Reinecke <hare@suse.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk> | 10 January 2020, 15:55:50 UTC |
| 9e635c2 | Jiri Kosina | 10 January 2020, 14:32:51 UTC | HID: hidraw, uhid: Always report EPOLLOUT hidraw and uhid device nodes are always available for writing so we should always report EPOLLOUT and EPOLLWRNORM bits, not only in the cases when there is nothing to read. Reported-by: Linus Torvalds <torvalds@linux-foundation.org> Fixes: be54e7461ffdc ("HID: uhid: Fix returning EPOLLOUT from uhid_char_poll") Fixes: 9f3b61dc1dd7b ("HID: hidraw: Fix returning EPOLLOUT from hidraw_poll") Signed-off-by: Jiri Kosina <jkosina@suse.cz> | 10 January 2020, 14:34:28 UTC |
| 10674d9 | Rafael J. Wysocki | 10 January 2020, 09:58:45 UTC | Merge branch 'powercap' * powercap: powercap: intel_rapl: add NULL pointer check to rapl_mmio_cpu_online() | 10 January 2020, 09:58:45 UTC |
| 529244b | James Bottomley | 09 January 2020, 01:21:32 UTC | scsi: enclosure: Fix stale device oops with hot replug Doing an add/remove/add on a SCSI device in an enclosure leads to an oops caused by poisoned values in the enclosure device list pointers. The reason is because we are keeping the enclosure device across the enclosed device add/remove/add but the current code is doing a device_add/device_del/device_add on it. This is the wrong thing to do in sysfs, so fix it by not doing a device_del on the enclosure device simply because of a hot remove of the drive in the slot. [mkp: added missing email addresses] Fixes: 43d8eb9cfd0a ("[SCSI] ses: add support for enclosure component hot removal") Link: https://lore.kernel.org/r/1578532892.3852.10.camel@HansenPartnership.com Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com> Reported-by: Luo Jiaxing <luojiaxing@huawei.com> Tested-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> | 10 January 2020, 06:38:40 UTC |
| 465f4ed | Xiang Chen | 09 January 2020, 01:12:24 UTC | scsi: sd: Clear sdkp->protection_type if disk is reformatted without PI If an attached disk with protection information enabled is reformatted to Type 0 the revalidation code does not clear the original protection type and subsequent accesses will keep setting RDPROTECT/WRPROTECT. Set the protection type to 0 if the disk reports PROT_EN=0 in READ CAPACITY(16). [mkp: commit desc] Fixes: fe542396da73 ("[SCSI] sd: Ensure we correctly disable devices with unknown protection type") Link: https://lore.kernel.org/r/1578532344-101668-1-git-send-email-chenxiang66@hisilicon.com Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> | 10 January 2020, 06:28:56 UTC |
| bef1d88 | Linus Torvalds | 10 January 2020, 05:42:05 UTC | Merge tag 'pstore-v5.5-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull pstore fix from Kees Cook: "Cengiz Can forwarded a Coverity report about more problems with a rare pstore initialization error path, so the allocation lifetime was rearranged to avoid needing to share the kfree() responsibilities between caller and callee" * tag 'pstore-v5.5-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: pstore/ram: Regularize prz label allocation lifetime | 10 January 2020, 05:42:05 UTC |
| 6d25ef7 | Linus Torvalds | 10 January 2020, 05:37:39 UTC | Merge tag 'drm-fixes-2020-01-10' of git://anongit.freedesktop.org/drm/drm Pull drm fixes from Dave Airlie: "Pre-LCA pull request I'm not sure how things will look next week, myself and Daniel are at LCA and I'm speaking quite late, so if I get my talk finished I'll probably process fixes. This week has a bunch of i915 fixes, some amdgpu fixes, one sun4i, one core MST, and one core fb_helper fix. More details below: core: - mst Fix NO_STOP_BIT bit offset (Wayne) fb_helper: - fb_helper: Fix bits_per_pixel param set behavior to round up (Geert) sun4i: - Fix RGB_DIV clock min divider on old hardware (Chen-Yu) amdgpu: - Stability fix for raven - Reduce pixel encoding to if max clock is exceeded on HDMI to allow additional high res modes - enable DRIVER_SYNCOBJ_TIMELINE for amdgpu i915: - Fix GitLab issue #446 causing GPU hangs: Do not restore invalid RS state - Fix GitLab issue #846: Restore coarse power gating that was disabled by initial RC66 context corruption security fixes. - Revert f6ec9483091f ("drm/i915: extend audio CDCLK>=2*BCLK constraint to more platforms") to avoid screen flicker - Fix to fill in unitialized uabi_instance in virtual engine uAPI - Add two missing W/As for ICL and EHL" * tag 'drm-fixes-2020-01-10' of git://anongit.freedesktop.org/drm/drm: drm/amdgpu: add DRIVER_SYNCOBJ_TIMELINE to amdgpu drm/amd/display: Reduce HDMI pixel encoding if max clock is exceeded Revert "drm/amdgpu: Set no-retry as default." drm/fb-helper: Round up bits_per_pixel if possible drm/sun4i: tcon: Set RGB DCLK min. divider based on hardware model drm/i915/dp: Disable Port sync mode correctly on teardown drm/i915: Add Wa_1407352427:icl,ehl drm/i915: Add Wa_1408615072 and Wa_1407596294 to icl,ehl drm/i915/gt: Restore coarse power gating drm/i915/gt: Do not restore invalid RS state drm/i915: Limit audio CDCLK>=2*BCLK constraint back to GLK only drm/i915/gt: Mark up virtual engine uabi_instance drm/dp_mst: correct the shifting in DP_REMOTE_I2C_READ | 10 January 2020, 05:37:39 UTC |
| 5e7c1b7 | Linus Torvalds | 10 January 2020, 05:03:54 UTC | Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma Pull rdma fixes from Jason Gunthorpe: "First RDMA subsystem updates for 5.5-rc. A very small set of fixes, most people seem to still be recovering from December! Five small driver fixes: - Fix error flow with MR allocation in bnxt_re - An errata work around for bnxt_re - Misuse of the workqueue API in hfi1 - Protocol error in hfi1 - Regression in 5.5 related to the mmap rework with i40iw" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: i40iw: Remove setting of VMA private data and use rdma_user_mmap_io IB/hfi1: Adjust flow PSN with the correct resync_psn IB/hfi1: Don't cancel unused work item RDMA/bnxt_re: Fix Send Work Entry state check while polling completions RDMA/bnxt_re: Avoid freeing MR resources if dereg fails | 10 January 2020, 05:03:54 UTC |
| 023b3b0 | Dave Airlie | 10 January 2020, 01:43:02 UTC | Merge tag 'drm-intel-fixes-2020-01-09-1' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes - Fix GitLab issue #446 causing GPU hangs: Do not restore invalid RS state - Fix GitLab issue #846: Restore coarse power gating that was disabled by initial RC66 context corruption security fixes. - Revert f6ec9483091f ("drm/i915: extend audio CDCLK>=2*BCLK constraint to more platforms") to avoid screen flicker - Fix to fill in unitialized uabi_instance in virtual engine uAPI - Add two missing W/As for ICL and EHL Signed-off-by: Dave Airlie <airlied@redhat.com> From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200109133458.GA15558@jlahtine-desk.ger.corp.intel.com | 10 January 2020, 01:43:02 UTC |
| 4a3033e | Linus Torvalds | 09 January 2020, 23:43:35 UTC | Merge tag 'gpio-v5.5-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO fixes from Linus Walleij: "Here is a host of GPIO fixes for the v5.5 series. The ACPI fix is especially important, see summary below and in the commit for details: - Select GPIOLIB_IRQCHIP on the max77620 GPIO expander - Fix context restore in the Zynq driver - Create a new ACPI quirk handler for disabling wakeups on problematic hardware. - Fix a coding style issue on the mockup device" * tag 'gpio-v5.5-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: gpiolib: acpi: Add honor_wakeup module-option + quirk mechanism gpiolib: acpi: Turn dmi_system_id table into a generic quirk table gpio: zynq: Fix for bug in zynq_gpio_restore_context API gpio: max77620: Add missing dependency on GPIOLIB_IRQCHIP gpio: mockup: fix coding style | 09 January 2020, 23:43:35 UTC |
| a6a55b5 | Linus Torvalds | 09 January 2020, 23:41:54 UTC | Merge tag 'pinctrl-v5.5-4' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control fixes from Linus Walleij: "Two fixes for pin control, not much to say about it, it's just regular driver fixes: - Fix erroneous shift in the Meson driver - Make Lochnagar select the GPIOLIB Kconfig symbol" * tag 'pinctrl-v5.5-4' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: pinctrl: meson: Fix wrong shift value when get drive-strength pinctrl: lochnagar: select GPIOLIB | 09 January 2020, 23:41:54 UTC |
