Revision cb6a58bef00b40084392774de0a6bc0602c6daec authored by Marco Iorio on 11 June 2024, 09:43:48 UTC, committed by André Martins on 13 June 2024, 13:01:41 UTC
Currently, the same etcd user (i.e., remote) is granted permissions to read the whole content of the clustermesh-apiserver's sidecar etcd instance, including also the data cached by kvstoremesh, when enabled. In an effort to harden the overall clustermesh posture, let's introduce a separate and dedicated user for local access, to ensure that remote clusters cannot access cached data, as it may include information that they would not normally have access to. Specifically, the remote user is intended to have access only to the information regarding the local cluster, while the local user can access cached data about remote clusters only. Still, for backward compatibility purposes, the remote user still retains access to cached data as well in this release. The reason being that there would otherwise be a time window upon upgrade in which Cilium Agents would lose access to the kvstoremesh data (especially in large clusters). Indeed, the new certificate would be mounted by the agents only upon rollout, but the configuration would be immediately reloaded (thus targeting the new, not yet mounted, certificate), hence breaking the access to the information cached by kvstoremesh. Signed-off-by: Marco Iorio <marco.iorio@isovalent.com>
1 parent 22bab80
Vagrantfile
# -*- mode: ruby -*-
# vi: set ft=ruby :
# The source of truth for vagrant box versions.
# Sets SERVER_BOX, SERVER_VERSION, NETNEXT_SERVER_BOX and NETNEXT_SERVER_VERSION
# Accepts overrides from env variables
require_relative 'vagrant_box_defaults.rb'
$SERVER_BOX = (ENV['SERVER_BOX'] || $SERVER_BOX)
$SERVER_VERSION= (ENV['SERVER_VERSION'] || $SERVER_VERSION)
$NETNEXT_SERVER_BOX = (ENV['NETNEXT_SERVER_BOX'] || $NETNEXT_SERVER_BOX)
$NETNEXT_SERVER_VERSION= (ENV['NETNEXT_SERVER_VERSION'] || $NETNEXT_SERVER_VERSION)
$NO_BUILD = (ENV['NO_BUILD'] || "0")
if ENV['NETNEXT'] == "true" || ENV['NETNEXT'] == "1" then
$SERVER_BOX = $NETNEXT_SERVER_BOX
$SERVER_VERSION = $NETNEXT_SERVER_VERSION
$vm_kernel = '+'
end
Vagrant.require_version ">= 2.0.0"
if ARGV.first == "up" && ENV['CILIUM_SCRIPT'] != 'true'
raise Vagrant::Errors::VagrantError.new, <<END
Calling 'vagrant up' directly is not supported. Instead, please run the
following to deploy a single-node cluster:
$ ./contrib/vagrant/start.sh
See the development guide for available configuration options:
https://docs.cilium.io/en/latest/contributing/development/dev_setup
END
end
if ENV['IPV4'] == '0'
raise Vagrant::Errors::VagrantError.new, <<END
Disabling IPv4 is currently not allowed until k8s 1.9 is released
END
end
# Workaround issue as described here:
# https://github.com/cilium/cilium/pull/12520
class VagrantPlugins::ProviderVirtualBox::Action::Network
def dhcp_server_matches_config?(dhcp_server, config)
true
end
end
$cleanup = <<SCRIPT
i=1
while [ "$i" -le "$((num_workers+1))" ]; do
VBoxManage natnetwork add --netname natnet$i --network 192.168.0.0/16 --ipv6 on --enable
i=$((i+1))
done 2>/dev/null
res=0
while [ "$res" == "0" ]; do
VBoxManage natnetwork remove --netname natnet$i
res=$?
i=$((i+1))
done 2>/dev/null
SCRIPT
$bootstrap = <<SCRIPT
set -o errexit
set -o nounset
set -o pipefail
if [ -x /home/vagrant/go/src/github.com/cilium/cilium/.devvmrc ] ; then
echo "----------------------------------------------------------------"
echo "Executing .devvmrc"
/home/vagrant/go/src/github.com/cilium/cilium/.devvmrc || true
fi
echo "----------------------------------------------------------------"
export PATH=/home/vagrant/go/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/usr/local/games
echo "editing journald configuration"
bash -c "echo RateLimitIntervalSec=1s >> /etc/systemd/journald.conf"
bash -c "echo RateLimitBurst=10000 >> /etc/systemd/journald.conf"
echo "restarting systemd-journald"
systemctl restart systemd-journald
echo "getting status of systemd-journald"
service systemd-journald status
echo "done configuring journald"
service docker restart
echo 'cd ~/go/src/github.com/cilium/cilium' >> /home/vagrant/.bashrc
echo 'export GOPATH=$(go env GOPATH)' >> /home/vagrant/.bashrc
chown -R vagrant:vagrant /home/vagrant 2>/dev/null || true
curl -SsL https://github.com/cilium/bpf-map/releases/download/v1.0/bpf-map -o bpf-map
chmod +x bpf-map
mv bpf-map /usr/bin
SCRIPT
$makeclean = ENV['MAKECLEAN'] ? "export MAKECLEAN=1" : ""
$build = <<SCRIPT
set -o errexit
set -o nounset
set -o pipefail
export PATH=/home/vagrant/go/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/usr/local/games
#{$makeclean}
~/go/src/github.com/cilium/cilium/contrib/vagrant/build.sh
rm -fr ~/go/bin/cilium*
SCRIPT
$install = <<SCRIPT
set -o errexit
set -o nounset
set -o pipefail
# Add an exception for the cilium repo for the root user to fix the
# "fatal: unsafe repository ('/home/vagrant/go/src/github.com/cilium/cilium' is owned by someone else)"
# error condition when running `sudo make install`
git config --global --add safe.directory /home/vagrant/go/src/github.com/cilium/cilium
sudo -E make -C /home/vagrant/go/src/github.com/cilium/cilium/ install
sudo mkdir -p /etc/sysconfig
sudo cp /home/vagrant/go/src/github.com/cilium/cilium/contrib/systemd/cilium-consul.service /lib/systemd/system
sudo cp /home/vagrant/go/src/github.com/cilium/cilium/contrib/systemd/cilium-docker.service /lib/systemd/system
sudo cp /home/vagrant/go/src/github.com/cilium/cilium/contrib/systemd/cilium-etcd.service /lib/systemd/system
sudo cp /home/vagrant/go/src/github.com/cilium/cilium/contrib/systemd/cilium.service /lib/systemd/system
sudo cp /home/vagrant/go/src/github.com/cilium/cilium/contrib/systemd/cilium-operator.service /lib/systemd/system
sudo cp /home/vagrant/go/src/github.com/cilium/cilium/contrib/systemd/cilium /etc/sysconfig
getent group cilium >/dev/null || sudo groupadd -r cilium
sudo usermod -a -G cilium vagrant
SCRIPT
$node_ip_base = ENV['IPV4_BASE_ADDR'] || ""
$node_nfs_base_ip = ENV['IPV4_BASE_ADDR_NFS'] || ""
$num_workers = (ENV['NWORKERS'] || 0).to_i
$workers_ipv4_addrs = $num_workers.times.collect { |n| $node_ip_base + "#{n+(ENV['FIRST_IP_SUFFIX']).to_i+1}" }
$workers_ipv4_addrs_nfs = $num_workers.times.collect { |n| $node_nfs_base_ip + "#{n+(ENV['FIRST_IP_SUFFIX_NFS']).to_i+1}" }
$master_ip = ENV['MASTER_IPV4']
$master_ipv6 = ENV['MASTER_IPV6_PUBLIC']
$workers_ipv6_addrs_str = ENV['IPV6_PUBLIC_WORKERS_ADDRS'] || ""
$workers_ipv6_addrs = $workers_ipv6_addrs_str.split(' ')
# Create unique ID for use in vboxnet name so Jenkins pipeline can have concurrent builds.
$job_name = ENV['JOB_BASE_NAME'] || "local"
$build_number = ENV['BUILD_NUMBER'] || "0"
$build_id = "#{$job_name}-#{$build_number}"
# Only create the build_id_name for Jenkins environment so that
# we can run VMs locally without having any the `build_id` in the name.
if ENV['BUILD_NUMBER'] then
$build_id_name = "-build-#{$build_id}"
end
if ENV['K8S'] then
$vm_base_name = "k8s"
else
$vm_base_name = "runtime"
end
# Set locate to en_US.UTF-8
ENV["LC_ALL"] = "en_US.UTF-8"
ENV["LC_CTYPE"] = "en_US.UTF-8"
if ENV['CILIUM_SCRIPT'] != 'true' then
Vagrant.configure(2) do |config|
config.vm.define "runtime1"
config.vm.define "k8s1"
config.vm.define "k8s2"
config.vm.define "k8s1+"
config.vm.define "k8s2+"
end
end
Vagrant.configure(2) do |config|
config.trigger.before :up, :provision, :reload do |trigger|
trigger.run = {inline: "bash -c '#{$cleanup}'"}
end
config.vm.provision "bootstrap", type: "shell", inline: $bootstrap
if $NO_BUILD == "0" then
config.vm.provision "build", type: "shell", run: "always", privileged: false, inline: $build
end
config.vm.provision "install", type: "shell", run: "always", privileged: false, inline: $install
config.vm.box_check_update = false
config.vm.provider "virtualbox" do |vb|
# Do not inherit DNS server from host, use proxy
vb.customize ["modifyvm", :id, "--natdnshostresolver1", "on"]
vb.customize ["modifyvm", :id, "--natdnsproxy1", "on"]
# Prevent VirtualBox from interfering with host audio stack
vb.customize ["modifyvm", :id, "--audio", "none"]
# Enable HPET, the Go scheduler heavily relies on accurate timers.
vb.customize ["modifyvm", :id, "--hpet", "on"]
config.vm.box = $SERVER_BOX
config.vm.box_version = $SERVER_VERSION
vb.memory = ENV['VM_MEMORY'].to_i
vb.cpus = ENV['VM_CPUS'].to_i
end
master_vm_name = "#{$vm_base_name}1#{$build_id_name}#{$vm_kernel}"
config.vm.define master_vm_name, primary: true do |cm|
node_ip = "#{$master_ip}"
node_ipv6 = "#{$master_ipv6}"
cm.vm.network "forwarded_port", guest: 6443, host: 7443, auto_correct: true
cm.vm.network "forwarded_port", guest: 9081, host: 9081, auto_correct: true
# 2345 is the default delv server port
cm.vm.network "forwarded_port", guest: 2345, host: 2345, auto_correct: true
cm.vm.network "private_network", ip: "#{$master_ip}",
virtualbox__intnet: "cilium-test-#{$build_id}"
if ENV['FIRST_IP_SUFFIX_NFS'] then
$nfs_ipv4_master_addr = $node_nfs_base_ip + "#{ENV['FIRST_IP_SUFFIX_NFS']}"
end
cm.vm.network "private_network", ip: "#{$nfs_ipv4_master_addr}", bridge: "enp0s9"
# Add IPv6 address this way or we get hit by a virtualbox bug
cm.vm.provision "ipv6-config",
type: "shell",
run: "always",
inline: "ip -6 a a #{$master_ipv6}/16 dev enp0s9"
if ENV["IPV6_EXT"] then
node_ip = "#{$master_ipv6}"
end
# Interface for the IPv6 NAT Service. The IP address doesn't matter as
# it won't be used. We use an IPv4 address as newer versions of VBox
# reject all IPv6 addresses.
cm.vm.network "private_network",
ip: "192.168.59.15"
cm.vm.provider "virtualbox" do |vb|
vb.customize ["modifyvm", :id, "--nic4", "natnetwork"]
vb.customize ["modifyvm", :id, "--nat-network4", "natnet1"]
end
cm.vm.provision "ipv6-nat-config",
type: "shell",
run: "always",
inline: "ip -6 r a default via fd17:625c:f037:2::1 dev enp0s10 || true"
cm.vm.hostname = "#{$vm_base_name}1"
if ENV['CILIUM_TEMP'] then
if ENV["K8S"] then
k8sinstall = "#{ENV['CILIUM_TEMP']}/cilium-k8s-install-1st-part.sh"
cm.vm.provision "k8s-install-master-part-1",
type: "shell",
run: "always",
env: {"node_ip" => node_ip, "node_ipv6" => node_ipv6},
privileged: true,
path: k8sinstall
end
script = "#{ENV['CILIUM_TEMP']}/node-1.sh"
cm.vm.provision "config-install", type: "shell", privileged: true, run: "always", path: script
# In k8s mode cilium needs etcd in order to run which was started in
# the first part of the script. The 2nd part will install the
# policies into kubernetes and cilium.
if ENV["K8S"] then
k8sinstall = "#{ENV['CILIUM_TEMP']}/cilium-k8s-install-2nd-part.sh"
cm.vm.provision "k8s-install-master-part-2",
type: "shell",
run: "always",
env: {"node_ip" => node_ip, "node_ipv6" => node_ipv6},
privileged: true,
path: k8sinstall
end
end
end
$num_workers.times do |n|
# n starts with 0
node_vm_name = "#{$vm_base_name}#{n+2}#{$build_id_name}#{$vm_kernel}"
node_hostname = "#{$vm_base_name}#{n+2}"
config.vm.define node_vm_name do |node|
node_ip = $workers_ipv4_addrs[n]
node_ipv6 = $workers_ipv6_addrs[n]
node.vm.network "private_network", ip: "#{node_ip}",
virtualbox__intnet: "cilium-test-#{$build_id}"
nfs_ipv4_addr = $workers_ipv4_addrs_nfs[n]
node.vm.network "private_network", ip: "#{nfs_ipv4_addr}", bridge: "enp0s9"
# Add IPv6 address this way or we get hit by a virtualbox bug
node.vm.provision "ipv6-config",
type: "shell",
run: "always",
inline: "ip -6 a a #{node_ipv6}/16 dev enp0s9"
# Interface for the IPv6 NAT Service. The IP address doesn't matter
# as it won't be used. We use an IPv4 address as newer versions of
# VBox reject all IPv6 addresses.
node.vm.network "private_network",
ip: "192.168.59.15"
node.vm.provider "virtualbox" do |vb|
vb.customize ["modifyvm", :id, "--nic4", "natnetwork"]
vb.customize ["modifyvm", :id, "--nat-network4", "natnet#{n+2}"]
end
node.vm.provision "ipv6-nat-config",
type: "shell",
run: "always",
inline: "ip -6 r a default via fd17:625c:f037:2::1 dev enp0s10 || true"
if ENV["IPV6_EXT"] then
node_ip = "#{node_ipv6}"
end
node.vm.hostname = "#{node_hostname}"
if ENV['CILIUM_TEMP'] then
if ENV["K8S"] then
k8sinstall = "#{ENV['CILIUM_TEMP']}/cilium-k8s-install-1st-part.sh"
node.vm.provision "k8s-install-node-part-1",
type: "shell",
run: "always",
env: {"node_ip" => node_ip, "node_ipv6" => node_ipv6},
privileged: true,
path: k8sinstall
end
script = "#{ENV['CILIUM_TEMP']}/node-#{n+2}.sh"
node.vm.provision "config-install", type: "shell", privileged: true, run: "always", path: script
if ENV["K8S"] then
k8sinstall = "#{ENV['CILIUM_TEMP']}/cilium-k8s-install-2nd-part.sh"
node.vm.provision "k8s-install-node-part-2",
type: "shell",
run: "always",
env: {"node_ip" => node_ip, "node_ipv6" => node_ipv6},
privileged: true,
path: k8sinstall
end
end
end
end
cilium_dir = '.'
cilium_path = '/home/vagrant/go/src/github.com/cilium/cilium'
if ENV["SHARE_PARENT"] == "2" then
cilium_dir = '../..'
cilium_path = '/home/vagrant/go/src/github.com'
elsif ENV["SHARE_PARENT"] then
cilium_dir = '..'
cilium_path = '/home/vagrant/go/src/github.com/cilium'
end
config.vm.synced_folder cilium_dir, cilium_path, type: "nfs", nfs_udp: false
# Don't forget to enable this ports on your host before starting the VM
# in order to have nfs working
# iptables -I INPUT -s 192.168.61.0/24 -j ACCEPT"
# if using nftables, in Fedora (with firewalld), use:
# nft -f ./contrib/vagrant/nftables.rules
if ENV['USER_MOUNTS'] then
# Allow multiple mounts divided by commas
ENV['USER_MOUNTS'].split(",").each do |mnt|
# Split "<to>=<from>"
user_mount = mnt.split("=", 2)
# Only one element, assume a path relative to home directories in both ends
if user_mount.length == 1 then
user_mount_to = "/home/vagrant/" + user_mount[0]
user_mount_from = "~/" + user_mount[0]
else
user_mount_to = user_mount[0]
# Remove "~/" prefix if any.
if user_mount_to.start_with?('~/') then
user_mount_to[0..1] = ''
end
# Add home directory prefix for non-absolute paths
if !user_mount_to.start_with?('/') then
user_mount_to = "/home/vagrant/" + user_mount_to
end
user_mount_from = user_mount[1]
# Add home prefix for host for any path in the project directory
# as it is already mounted.
if !user_mount_from.start_with?('/', '.', '~') then
user_mount_from = "~/" + user_mount_from
end
end
config.vm.synced_folder "#{user_mount_from}", "#{user_mount_to}", type: "nfs", nfs_udp: false
end
end
end
![swh spinner](/static/img/swh-spinner.gif)
Computing file changes ...