Revision cde6901b7b69557a6f90f3183f76eda581af015e authored by Shaddy Baddah on 28 November 2008, 06:10:45 UTC, committed by John W. Linville on 05 December 2008, 14:18:35 UTC
Under my 2.6.28-rc6 sparc64, when associating to an AP through my zd1211rw device, I was seeing kernel log messages like (not exact output): Kernel unaligned access at TPC[10129b68] zd_mac_rx+0x144/0x32c [zd1211rw] For the zd1211rw module, on RX, the 80211 packet will be located after the PLCP header in the skb data buffer. The PLCP header being 5 bytes long, the 80211 header will start unaligned from an aligned skb buffer. As per Documentation/unaligned-memory-access.txt, we must replace the not unaligned() safe compare_ether_addr() with memcmp() to protect architectures that require alignment. Signed-off-by: Shaddy Baddah <shaddy_baddah@hotmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
1 parent 5cf12e8
crc32defs.h
/*
* There are multiple 16-bit CRC polynomials in common use, but this is
* *the* standard CRC-32 polynomial, first popularized by Ethernet.
* x^32+x^26+x^23+x^22+x^16+x^12+x^11+x^10+x^8+x^7+x^5+x^4+x^2+x^1+x^0
*/
#define CRCPOLY_LE 0xedb88320
#define CRCPOLY_BE 0x04c11db7
/* How many bits at a time to use. Requires a table of 4<<CRC_xx_BITS bytes. */
/* For less performance-sensitive, use 4 */
#ifndef CRC_LE_BITS
# define CRC_LE_BITS 8
#endif
#ifndef CRC_BE_BITS
# define CRC_BE_BITS 8
#endif
/*
* Little-endian CRC computation. Used with serial bit streams sent
* lsbit-first. Be sure to use cpu_to_le32() to append the computed CRC.
*/
#if CRC_LE_BITS > 8 || CRC_LE_BITS < 1 || CRC_LE_BITS & CRC_LE_BITS-1
# error CRC_LE_BITS must be a power of 2 between 1 and 8
#endif
/*
* Big-endian CRC computation. Used with serial bit streams sent
* msbit-first. Be sure to use cpu_to_be32() to append the computed CRC.
*/
#if CRC_BE_BITS > 8 || CRC_BE_BITS < 1 || CRC_BE_BITS & CRC_BE_BITS-1
# error CRC_BE_BITS must be a power of 2 between 1 and 8
#endif
Computing file changes ...
