Skip to main content
Revision d2173b0210b0b7495eaf40d4f2d5f86e16c7a537 authored by Zhang Yunjun on 03 January 2020, 07:20:21 UTC, committed by Zhang Yunjun on 04 January 2020, 01:08:35 UTC
fractal: adaptive p0 scaling factor
adapt p0 value internally instead of the previously fixed scale value so that the input p0 is equal to C0 from the check_power_spectrum().

check_power_spectrum_1d() use the square part of the input data with dimension as a power of 2, for more robust performance.
1 parent d0259da
Raw File Download
plot_smallbaselineApp.sh
#! /bin/sh
###############################################################
# Plot Results from Routine Workflow with smallbaselineApp.py
# Author: Zhang Yunjun, 2017-07-23
# Latest update: 2019-09-18
###############################################################


## Change to 0 if you do not want to re-plot loaded dataset again
plot_key_files=1
plot_loaded_data=1
plot_loaded_data_aux=1
plot_timeseries=1
plot_geocoded_data=1
plot_the_rest=1


# Default file name
mask_file='maskTempCoh.h5'
dem_file='./inputs/geometryRadar.h5'
if [ ! -f $dem_file ]; then
    dem_file='./inputs/geometryGeo.h5'
fi

## Log File
log_file='plot_smallbaselineApp.log'
touch $log_file
printf "\n\n\n\n\n" >> $log_file
echo "########################  ./plot_smallbaselineApp.sh  ########################" >> $log_file
date >> $log_file
echo "##############################################################################" >> $log_file
#use "echo 'yoyoyo' | tee -a log" to output message to both screen and file.
#use "echo 'yoyoyo' >> log" to output message to file only.

## Create pic folder
if [ ! -d "pic" ]; then
    echo 'Create ./pic folder'
    mkdir pic
fi

## common view.py option for all files
view='view.py --nodisplay --dpi 150 --update '

## Plot Key files
opt=' --dem '$dem_file' --mask '$mask_file' -u cm '
#opt=' --dem '$dem_file' --mask '$mask_file' -u cm --vlim -2 2'
if [ $plot_key_files -eq 1 ]; then
    file=velocity.h5;              test -f $file && $view $file $opt               >> $log_file
    file=temporalCoherence.h5;     test -f $file && $view $file -c gray --vlim 0 1 >> $log_file
    file=maskTempCoh.h5;           test -f $file && $view $file -c gray --vlim 0 1 >> $log_file
    file=inputs/geometryRadar.h5;  test -f $file && $view $file                    >> $log_file
    file=inputs/geometryGeo.h5;    test -f $file && $view $file                    >> $log_file
fi


## Loaded Dataset
if [ $plot_loaded_data -eq 1 ]; then
    file=inputs/ifgramStack.h5
    test -f $file && $view $file unwrapPhase-  --zero-mask --wrap >> $log_file
    test -f $file && $view $file unwrapPhase-  --zero-mask        >> $log_file
    test -f $file && $view $file coherence-    --mask no          >> $log_file
fi


## Auxliary Files from loaded dataset
if [ $plot_loaded_data_aux -eq 1 ]; then
    file=avgPhaseVelocity.h5;   test -f $file && $view $file                      >> $log_file
    file=avgSpatialCoh.h5;      test -f $file && $view $file -c gray --vlim 0 1   >> $log_file
    file=maskConnComp.h5;       test -f $file && $view $file -c gray --vlim 0 1   >> $log_file
fi


## Time-series files
opt='--mask '$mask_file' --noaxis -u cm --wrap --wrap-range -10 10 '
if [ $plot_timeseries -eq 1 ]; then
    file=timeseries.h5;                             test -f $file && $view $file $opt >> $log_file

    #LOD for Envisat
    file=timeseries_LODcor.h5;                      test -f $file && $view $file $opt >> $log_file
    file=timeseries_LODcor_ECMWF.h5;                test -f $file && $view $file $opt >> $log_file
    file=timeseries_LODcor_ECMWF_demErr.h5;         test -f $file && $view $file $opt >> $log_file
    file=timeseries_LODcor_ECMWF_ramp.h5;           test -f $file && $view $file $opt >> $log_file
    file=timeseries_LODcor_ECMWF_ramp_demErr.h5;    test -f $file && $view $file $opt >> $log_file

    #w tropo delay corrections
    for tropo in ERA5 ECMWF MERRA NARR tropHgt; do
        file=timeseries_${tropo}.h5;                test -f $file && $view $file $opt >> $log_file
        file=timeseries_${tropo}_demErr.h5;         test -f $file && $view $file $opt >> $log_file
        file=timeseries_${tropo}_ramp.h5;           test -f $file && $view $file $opt >> $log_file
        file=timeseries_${tropo}_ramp_demErr.h5;    test -f $file && $view $file $opt >> $log_file
    done

    #w/o trop delay correction
    file=timeseries_ramp.h5;                        test -f $file && $view $file $opt >> $log_file
    file=timeseries_demErr_ramp.h5;                 test -f $file && $view $file $opt >> $log_file
fi


## Geo coordinates for UNAVCO Time-series InSAR Archive Product
if [ $plot_geocoded_data -eq 1 ]; then
    file=./geo/geo_maskTempCoh.h5;                  test -f $file && $view $file -c gray  >> $log_file
    file=./geo/geo_temporalCoherence.h5;            test -f $file && $view $file -c gray  >> $log_file
    file=./geo/geo_velocity.h5;                     test -f $file && $view $file velocity >> $log_file
    file=./geo/geo_timeseries_ECMWF_demErr_ramp.h5; test -f $file && $view $file --noaxis >> $log_file
    file=./geo/geo_timeseries_ECMWF_demErr.h5;      test -f $file && $view $file --noaxis >> $log_file
    file=./geo/geo_timeseries_demErr_ramp.h5;       test -f $file && $view $file --noaxis >> $log_file
    file=./geo/geo_timeseries_demErr.h5;            test -f $file && $view $file --noaxis >> $log_file
fi


if [ $plot_the_rest -eq 1 ]; then
    for tropo in ERA5 ECMWF MERRA NARR; do
        file=velocity${tropo}.h5;   test -f $file && $view $file --mask no >> $log_file
    done
    file=numInvIfgram.h5;           test -f $file && $view $file --mask no >> $log_file
fi


## Move/copy picture files to pic folder
echo "Copy *.txt files into ./pic folder."
cp *.txt pic/
echo "Move *.png/pdf/kmz files into ./pic folder."
mv *.png *.pdf *.kmz ./geo/*.kmz pic/
back to top