Revision d2e3fce9ddafe689c6f7cb355f23560637e30b9d authored by Ville Syrjälä on 10 November 2020, 21:04:47 UTC, committed by Rodrigo Vivi on 19 November 2020, 06:52:25 UTC
EDID can declare the maximum supported bpc up to 16, and apparently there are displays that do so. Currently we assume 12 bpc is tha max. Fix the assumption and toss in a MISSING_CASE() for any other value we don't expect to see. This fixes modesets with a display with EDID max bpc > 12. Previously any modeset would just silently fail on platforms that didn't otherwise limit this via the max_bpc property. In particular we don't add the max_bpc property to HDMI ports on gmch platforms, and thus we would see the raw max_bpc coming from the EDID. I suppose we could already adjust this to also allow 16bpc, but seeing as no current platform supports that there is little point. Cc: stable@vger.kernel.org Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/2632 Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201110210447.27454-1-ville.syrjala@linux.intel.com Reviewed-by: José Roberto de Souza <jose.souza@intel.com> (cherry picked from commit 2ca5a7b85b0c2b97ef08afbd7799b022e29f192e) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
1 parent b5462cc
occ.rst
Kernel driver occ-hwmon
=======================
Supported chips:
* POWER8
* POWER9
Author: Eddie James <eajames@linux.ibm.com>
Description
-----------
This driver supports hardware monitoring for the On-Chip Controller (OCC)
embedded on POWER processors. The OCC is a device that collects and aggregates
sensor data from the processor and the system. The OCC can provide the raw
sensor data as well as perform thermal and power management on the system.
The P8 version of this driver is a client driver of I2C. It may be probed
manually if an "ibm,p8-occ-hwmon" compatible device is found under the
appropriate I2C bus node in the device-tree.
The P9 version of this driver is a client driver of the FSI-based OCC driver.
It will be probed automatically by the FSI-based OCC driver.
Sysfs entries
-------------
The following attributes are supported. All attributes are read-only unless
specified.
The OCC sensor ID is an integer that represents the unique identifier of the
sensor with respect to the OCC. For example, a temperature sensor for the third
DIMM slot in the system may have a sensor ID of 7. This mapping is unavailable
to the device driver, which must therefore export the sensor ID as-is.
Some entries are only present with certain OCC sensor versions or only on
certain OCCs in the system. The version number is not exported to the user
but can be inferred.
temp[1-n]_label
OCC sensor ID.
[with temperature sensor version 1]
temp[1-n]_input
Measured temperature of the component in millidegrees
Celsius.
[with temperature sensor version >= 2]
temp[1-n]_type
The FRU (Field Replaceable Unit) type
(represented by an integer) for the component
that this sensor measures.
temp[1-n]_fault
Temperature sensor fault boolean; 1 to indicate
that a fault is present or 0 to indicate that
no fault is present.
[with type == 3 (FRU type is VRM)]
temp[1-n]_alarm
VRM temperature alarm boolean; 1 to indicate
alarm, 0 to indicate no alarm
[else]
temp[1-n]_input
Measured temperature of the component in
millidegrees Celsius.
freq[1-n]_label
OCC sensor ID.
freq[1-n]_input
Measured frequency of the component in MHz.
power[1-n]_input
Latest measured power reading of the component in
microwatts.
power[1-n]_average
Average power of the component in microwatts.
power[1-n]_average_interval
The amount of time over which the power average
was taken in microseconds.
[with power sensor version < 2]
power[1-n]_label
OCC sensor ID.
[with power sensor version >= 2]
power[1-n]_label
OCC sensor ID + function ID + channel in the form
of a string, delimited by underscores, i.e. "0_15_1".
Both the function ID and channel are integers that
further identify the power sensor.
[with power sensor version 0xa0]
power[1-n]_label
OCC sensor ID + sensor type in the form of a string,
delimited by an underscore, i.e. "0_system". Sensor
type will be one of "system", "proc", "vdd" or "vdn".
For this sensor version, OCC sensor ID will be the same
for all power sensors.
[present only on "master" OCC; represents the whole system power; only one of
this type of power sensor will be present]
power[1-n]_label
"system"
power[1-n]_input
Latest system output power in microwatts.
power[1-n]_cap
Current system power cap in microwatts.
power[1-n]_cap_not_redundant
System power cap in microwatts when
there is not redundant power.
power[1-n]_cap_max
Maximum power cap that the OCC can enforce in
microwatts.
power[1-n]_cap_min Minimum power cap that the OCC can enforce in
microwatts.
power[1-n]_cap_user The power cap set by the user, in microwatts.
This attribute will return 0 if no user power
cap has been set. This attribute is read-write,
but writing any precision below watts will be
ignored, i.e. requesting a power cap of
500900000 microwatts will result in a power cap
request of 500 watts.
[with caps sensor version > 1]
power[1-n]_cap_user_source
Indicates how the user power cap was
set. This is an integer that maps to
system or firmware components that can
set the user power cap.
The following "extn" sensors are exported as a way for the OCC to provide data
that doesn't fit anywhere else. The meaning of these sensors is entirely
dependent on their data, and cannot be statically defined.
extn[1-n]_label
ASCII ID or OCC sensor ID.
extn[1-n]_flags
This is one byte hexadecimal value. Bit 7 indicates the
type of the label attribute; 1 for sensor ID, 0 for
ASCII ID. Other bits are reserved.
extn[1-n]_input
6 bytes of hexadecimal data, with a meaning defined by
the sensor ID.
![swh spinner](/static/img/swh-spinner.gif)
Computing file changes ...