| d3a36fb | Linus Torvalds | 18 May 2007, 03:02:36 UTC | Merge branch 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev * 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev: sata_via: pcim_iomap_regions() conversion missed BAR5 libata: remove libata.spindown_compat sata_nv: fix fallout of devres conversion drivers/ata: remove the wildcard from sata_nv driver | 18 May 2007, 03:02:36 UTC |
| 8fd7d1b | Tejun Heo | 17 May 2007, 11:37:12 UTC | sata_via: pcim_iomap_regions() conversion missed BAR5 pcim_iomap_regions() conversion missed BAR5. Fix it. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org> | 18 May 2007, 00:57:38 UTC |
| d9aca22 | Tejun Heo | 17 May 2007, 14:43:26 UTC | libata: remove libata.spindown_compat With STANDBYDOWN tracking added, libata.spindown_compat isn't necessary anymore. If userspace shutdown(8) issues STANDBYNOW, libata warns. If userspace shutdown(8) doesn't issue STANDBYNOW, libata does the right thing. Userspace can tell whether kernel supports spindown by testing whether sysfs node manage_start_stop exists as before. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org> | 18 May 2007, 00:57:38 UTC |
| 1daf9ce | Tejun Heo | 17 May 2007, 11:13:57 UTC | sata_nv: fix fallout of devres conversion As with all other drivers, sata_nv's hpriv is allocated with devm_kzalloc() and there's no need to free it explicitly. Kill nv_remove_one() which incorrectly used kfree() instead of devm_kfree() and use ata_pci_remove_one() directly. Original fix is from Peer Chen. Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: Peer Chen <pchen@nvidia.com> Signed-off-by: Jeff Garzik <jeff@garzik.org> | 18 May 2007, 00:57:10 UTC |
| 074b8ba | Peer Chen | 11 May 2007, 05:48:49 UTC | drivers/ata: remove the wildcard from sata_nv driver Because nvidia SATA controllers onward base on AHCI, so wildcard in sata_nv driver is unnecessary. Also the wildcard sometimes cause sata_nv driver to be loaded for AHCI controllers,which is not as expected. Signed-off-by: Peer Chen <pchen@nvidia.com> Cc: Tejun Heo <htejun@gmail.com> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org> | 18 May 2007, 00:57:10 UTC |
| e94bd23 | Auke Kok | 16 May 2007, 08:49:46 UTC | e1000: Fix msi enable leak on error, don't print error message, cleanup pci_enable_msi failure is a normal event so we should not print any error. Going over the code I spotted a missing pci_disable_msi() leak when irq allocation fails. The whole code also needed a cleanup, so I combined the two different calls to pci_request_irq into a single call making this look a lot better. All #ifdef CONFIG_PCI_MSI's have been removed. Compile tested with both CONFIG_PCI_MSI enabled and disabled. Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com> Cc: H. Peter Anvin <hpa@zytor.com> Signed-off-by: Jeff Garzik <jeff@garzik.org> | 18 May 2007, 00:43:15 UTC |
| fb136c0 | Auke Kok | 17 May 2007, 22:29:07 UTC | ixgb: don't print error if pci_enable_msi() fails, cleanup minor leak pci_enable_msi calls can fail for normal operational reasons. Driver should not print an error message in that case. Fix a leak that leaves msi enabled if pci_request_irq fails. We can remove CONFIG_PCI_MSI ifdefs alltogether Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org> | 18 May 2007, 00:43:15 UTC |
| 4a79a04 | Mithlesh Thukral | 17 May 2007, 13:52:25 UTC | NetXen: Fix NetXen driver ping on system-p NetXen: Fix for driver on System-p This patch will fix a ping issue on system-p Signed-off by: Milan Bag <mbag@netxen.com> Signed-off by: Adhiraj Joshi <adhiraj@netxen.com> Signed-by: Mithlesh Thukral <mithlesh@netxen.com> Signed-off-by: Jeff Garzik <jeff@garzik.org> | 18 May 2007, 00:43:15 UTC |
| 9873940 | Christoph Hellwig | 16 May 2007, 21:58:00 UTC | spidernet: node-aware skbuff allocation Spidernet was the driver I original did all the node-aware netdevice allocation for, but after a year it still hasn't hit mainline. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Linas Vepstas <linas@austin.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org> | 18 May 2007, 00:43:15 UTC |
| 3b6330c | Scott Wood | 16 May 2007, 20:06:59 UTC | gianfar: Add I/O barriers when touching buffer descriptor ownership. The hardware must not see that is given ownership of a buffer until it is completely written, and when the driver receives ownership of a buffer, it must ensure that any other reads to the buffer reflect its final state. Thus, I/O barriers are added where required. Without this patch, I have observed GCC reordering the setting of bdp->length and bdp->status in gfar_new_skb. Hardware reordering was also theoretically possible. Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Jeff Garzik <jeff@garzik.org> | 18 May 2007, 00:43:15 UTC |
| dbf2e85 | Eugene Surovegin | 16 May 2007, 19:01:05 UTC | ibm_emac: fix link speed detection change Fix link speed detection change. Thanks to Stefan Roese <sr@denx.de> for finding this bug. CC: Stefan Roese <sr@denx.de> Signed-off-by: Eugene Surovegin <ebs@ebshome.net> Signed-off-by: Jeff Garzik <jeff@garzik.org> | 18 May 2007, 00:43:15 UTC |
| 5bb96e9 | Eugene Surovegin | 16 May 2007, 18:59:48 UTC | ibm_emac: improved PHY support Original patch is from Jeff Haran <jharan@brocade.com> with my minor style fixes. His comments follow: The first problem was in the function that configures the PHY for autonegotiation, genmii_setup_aneg(). The original code does a read/modify/write of the autonegotiation advertizement register (reg 4), followed by a read/modify/write of the control register (reg 0). While the original code follows the proper procedure as per reading the IEEE specs, what I found is that on at least one PHY model (National DP83843) the read of the control register comes back with the soft reset bit set (bit 15). Because of the read/modify/write operation, this causes the write to write a 1 back to the reset bit, which initiates a software reset of the PHY. This software reset causes the PHY to return to its power up state which advertizes all modes of operation, thus negating the write to the autoneg advertizement register. The modification is to spin reading the control register until the soft reset bit is clear before doing the modify/write. The second problem was in the function that configures the PHY for forced operation, genmii_setup_forced(). The original code initiates a software reset operation via a write of a 1 to bit 15 of the control register (reg 0), but then proceeds to do a second write to that same register without waiting until that reset bit is cleared by the PHY itself (which according to the IEEE specs indicates that the PHY reset is complete). This is a violation of how one is supposed to use this software reset feature of these PHYs and I believe was the cause of mysterious, difficult to reproduce link failures that we've observed on some of our systems that use this driver. The fix is to modify the function so that it spins waiting for the reset bit to clear after doing the soft reset and before doing the subsequent write. Signed-off-by: Jeff Haran <jharan@brocade.com> CC: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Eugene Surovegin <ebs@ebshome.net> Signed-off-by: Jeff Garzik <jeff@garzik.org> | 18 May 2007, 00:43:14 UTC |
| 0ec6d95 | Eugene Surovegin | 16 May 2007, 18:57:37 UTC | ibm_emac: fix section mismatch warnings Fix "Section mismatch" warnings Signed-off-by: Eugene Surovegin <ebs@ebshome.net> Signed-off-by: Jeff Garzik <jeff@garzik.org> | 18 May 2007, 00:43:14 UTC |
| bb33808 | Christoph Hellwig | 16 May 2007, 12:59:04 UTC | small netdevices.txt fix Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jeff Garzik <jeff@garzik.org> | 18 May 2007, 00:43:14 UTC |
| 50432cb | Stephen Hemminger | 14 May 2007, 19:38:15 UTC | sky2: memory barriers change Do some memory barrier changes for safety/perfomance: Don't need read after update to index, mmiowb() followed by read at end of irq is sufficient. Signed-off-by: Stephn Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org> | 18 May 2007, 00:43:14 UTC |
| 84787e3 | Stephen Hemminger | 14 May 2007, 19:38:14 UTC | sky2: remove dual port workaround This workaround was added to deal with NAPI core and how it affected dual port shared polling. It turned out not to be necessary. Stopping device 0 only doesn't stop NAPI from working completely after that. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org> | 18 May 2007, 00:43:14 UTC |
| a3caead | Stephen Hemminger | 14 May 2007, 19:38:13 UTC | sky2: MIB counter overflow handling Make sure that if we ever get a MIB counter overflow interrupt (normally masked off), that the IRQ is cleared. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org> | 18 May 2007, 00:43:14 UTC |
| 3225b91 | Stephen Hemminger | 14 May 2007, 19:38:12 UTC | sky2: keep track of receive alloc failures When driver can't allocate receive buffer it drops incoming packet. Keep a counter. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org> | 18 May 2007, 00:43:13 UTC |
| 53419c6 | Stephen Hemminger | 14 May 2007, 19:38:11 UTC | sky2: PHY register settings Align the PHY setup of the sky2 driver with the vendor sk98lin (10.0.4.3) driver. The PHY register settings are mostly black magic, even with access to the documentation it isn't clear what the right values are. The changes are mostly comments, the code change only affects the Yukon FE (100 mbit only) version. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org> | 18 May 2007, 00:43:13 UTC |
| abc368a | Stephen Hemminger | 14 May 2007, 19:38:10 UTC | sky2: remove Gigabyte 88e8056 restriction The problems with Gigabyte motherboards are system configuration dependent. Since it works fine for some users, it doesn't make sense to deprive them. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org> | 18 May 2007, 00:43:13 UTC |
| 0479ea0 | David Woodhouse | 17 May 2007, 10:48:12 UTC | Fix incorrect prototype for ipxrtr_route_packet() The function ipxrtr_route_packet() takes a 'len' argument of type size_t. However, its prototype in af_ipx.c incorrectly suggests that the corresponding argument is of type 'int' instead. Discovered by building with --combine and letting the compiler see it all at once. Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 17 May 2007, 12:25:49 UTC |
| b5b82df | David Woodhouse | 17 May 2007, 06:27:39 UTC | NS16550A: Restore HS settings in EXCR2 on resume After a suspend/resume cycle, the UART may have been reset into low-speed mode -- either because it's actually been reset, or because the firmware pokes at the old-style divisor registers. If we detected it as a NS16550A SuperIO chip in the first place and set baud_base to 921600, then we should do so again in the resume path. This patch adds that code to serial8250_resume_port(), and also makes serial8250_resume() actually call serial8250_resume_port() for each port instead of just calling uart_resume_port() directly. And thus fixes serial port operation after suspend/resume. It also fixes a bogus comment where we write the EXCR2 register with a comment saying /* EXCR1 */ Signed-off-by: David Woodhouse <dwmw2@infradead.org> Acked-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 17 May 2007, 12:25:49 UTC |
| c97a9e1 | Nick Piggin | 17 May 2007, 05:11:21 UTC | mm: more rmap checking Re-introduce rmap verification patches that Hugh removed when he removed PG_map_lock. PG_map_lock actually isn't needed to synchronise access to anonymous pages, because PG_locked and PTL together already do. These checks were important in discovering and fixing a rare rmap corruption in SLES9. Signed-off-by: Nick Piggin <npiggin@suse.de> Cc: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 17 May 2007, 12:23:06 UTC |
| ea12589 | Christoph Lameter | 17 May 2007, 05:11:21 UTC | Fix page allocation flags in grow_dev_page() grow_dev_page() simply passes GFP_NOFS to find_or_create_page. This means the allocation of radix tree nodes is done with GFP_NOFS and the allocation of a new page is done using GFP_NOFS. The mapping has a flags field that contains the necessary allocation flags for the page cache allocation. These need to be consulted in order to get DMA and HIGHMEM allocations etc right. And yes a blockdev could be allowing Highmem allocations if its a ramdisk. Cc: Hugh Dickins <hugh@veritas.com> Signed-off-by: Christoph Lameter <clameter@sgi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 17 May 2007, 12:23:06 UTC |
| 8d98a69 | Rafael J. Wysocki | 17 May 2007, 05:11:19 UTC | swsusp: fix sysfs interface The sysfs files /sys/power/disk and /sys/power/state do not work as documented, since they allow the user to write only a few initial characters of the input string to trigger the option (eg. 'echo pl > /sys/power/disk' activates the platform mode of hibernation). Fix it. Special thanks to Peter Moulder <Peter.Moulder@infotech.monash.edu.au> for pointing out the problem. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 17 May 2007, 12:23:05 UTC |
| 7925409 | Jan Kara | 17 May 2007, 05:11:19 UTC | circular locking dependency found in QUOTA OFF i_mutex on quota files is special. Unlike i_mutexes for other inodes it is acquired under dqonoff_mutex. Tell lockdep about this lock ranking. Also comment and code in quota_sync_sb() seem to be bogus (as i_mutex for quota file can be acquired under dqonoff_mutex). Move truncate_inode_pages() call under dqonoff_mutex and save some problems with races... Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 17 May 2007, 12:23:05 UTC |
| bb49b32 | Hugh Dickins | 17 May 2007, 05:11:18 UTC | i386: don't check_pgt_cache in flush_tlb_mm No other architecture calls check_pgt_cache() from within flush_tlb_mm(), and i386 is already calling check_pgt_cache() from the usual places, tlb_finish_mmu() and cpu_idle() (the latter being odd, but not unusual). flush_tlb_mm() has no business to be freeing pages: remove that line, which sneaked in with slub's i386 support. Signed-off-by: Hugh Dickins <hugh@veritas.com> Cc: Andi Kleen <ak@suse.de> Acked-by: Christoph Lameter <clameter@sgi.com> Acked-by: William Lee Irwin III <wli@holomorphy.com> Cc: David Miller <davem@davemloft.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 17 May 2007, 12:23:05 UTC |
| c9f2875 | Nate Diller | 17 May 2007, 05:11:17 UTC | ecryptfs: use zero_user_page Use zero_user_page() instead of open-coding it. Signed-off-by: Nate Diller <nate.diller@gmail.com> Cc: Michael Halcrow <mhalcrow@us.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 17 May 2007, 12:23:05 UTC |
| 71ce92f | Dan Aloni | 17 May 2007, 05:11:16 UTC | make sysctl/kernel/core_pattern and fs/exec.c agree on maximum core filename size Make sysctl/kernel/core_pattern and fs/exec.c agree on maximum core filename size and change it to 128, so that extensive patterns such as '/local/cores/%e-%h-%s-%t-%p.core' won't result in truncated filename generation. Signed-off-by: Dan Aloni <da-x@monatomic.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 17 May 2007, 12:23:05 UTC |
| bc88d5d | wendy xiong | 17 May 2007, 05:11:16 UTC | icom: add new sub-device-id to support new adapter This patch add new sub-device-id to support new adapter and changed the interrupt irq number for unsigned char to unsigned int. [akpm@osdl.org: fix whitespace in device table] Signed-off by: Wendy Xiong <wendyx@us.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 17 May 2007, 12:23:05 UTC |
| e40659c | David Brownell | 17 May 2007, 05:11:15 UTC | rtc kconfig clarification Make drivers/rtc/Kconfig be clearer about what the various "interfaces" actually mean, by showing path names. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 17 May 2007, 12:23:05 UTC |
| 558a40f | David Brownell | 17 May 2007, 05:11:14 UTC | rtc-omap build fix Fix typo which breaks build. How did that happen? Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 17 May 2007, 12:23:05 UTC |
| 83c6590 | David Brownell | 17 May 2007, 05:11:13 UTC | gpio interface loosens call restrictions Loosen gpio_{request,free}() and gpio_direction_{in,out}put() call context restrictions slightly, so a common idiom is no longer an error: board init code setting up spinlock-safe GPIOs before tasking is enabled. The issue was caught by some paranoid code with might_sleep() checks. The legacy platform-specific GPIO interfaces stick to spinlock-safe GPIOs, so this change reflects current implementations and won't break anything. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 17 May 2007, 12:23:05 UTC |
| 621e59a | Randy Dunlap | 17 May 2007, 05:11:12 UTC | docbook: make kernel-locking table readable Andi Kleen pointed out to me that the kernel locking cheat sheet table entries are unreadable. Make table entries smaller so that pdf and ps output is readable (columns were being overwritten and garbled) by using abbreviations. This allows the tables to fit on one page cleanly. Add a Legend for the abbreviations: SLIS: spin_lock_irqsave SLI: spin_lock_irq SL: spin_lock SLBH: spin_lock_bh DI: down_interruptible Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 17 May 2007, 12:23:05 UTC |
| 3dd1a32 | Randy Dunlap | 17 May 2007, 05:11:12 UTC | parport: mailing list is subscribers-only linux-parport is subscribers-only: Your mail to 'Linux-parport' with the subject Re: [QUESTION] parallel console configuration Is being held until the list moderator can review it for approval. The reason it is being held: Post by non-member to a members-only list Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 17 May 2007, 12:23:05 UTC |
| e3dfd29 | Oleg Nesterov | 17 May 2007, 05:11:11 UTC | make freezeable workqueues singlethread It is a known fact that freezeable multithreaded workqueues doesn't like CPU_DEAD. We keep them only for the incoming CPU-hotplug rework. Sadly, we can't just kill create_freezeable_workqueue() right now, make them singlethread. Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Gautham R Shenoy <ego@in.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 17 May 2007, 12:23:05 UTC |
| a1a4849 | Gerd Hoffmann | 17 May 2007, 05:11:09 UTC | Refine SCREEN_INFO sanity check for vgacon initialization Refine SCREEN_INFO sanity check for vgacon initialization. Checking video mode field only to see whenever SCREEN_INFO is initialized is not enougth, in some cases it is zero although a vga card is present. Lets additionally check cols and lines. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Andi Kleen <ak@suse.de> Cc: Alan <alan@lxorguk.ukuu.org.uk> Cc: Ingo Molnar <mingo@elte.hu> Acked-by: Eric W. Biederman <ebiederm@xmission.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 17 May 2007, 12:23:04 UTC |
| 79974a0 | Heiko Carstens | 17 May 2007, 05:11:09 UTC | Let smp_call_function_single return -EBUSY on UP All architectures that have an implementation of smp_call_function_single let it return -EBUSY if it is asked to execute func on the current cpu. (akpm: except for x86_64). Therefore the UP version must always return -EBUSY. [akpm@linux-foundation.org: build fix] Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Andi Kleen <ak@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 17 May 2007, 12:23:04 UTC |
| 8317f14 | Heiko Carstens | 17 May 2007, 05:11:08 UTC | simplify compat_sys_timerfd Just thought this is easier to read. Acked-by: Davide Libenzi <davidel@xmailserver.org> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 17 May 2007, 12:23:04 UTC |
| d55e2ca | Benjamin Herrenschmidt | 17 May 2007, 05:11:07 UTC | Make __vunmap static __vunmap doesn't seem to be used outside of mm/vmalloc.c, and has no prototype in any header so let's make it static Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 17 May 2007, 12:23:04 UTC |
| df652fe | Bernhard Walle | 17 May 2007, 05:11:06 UTC | i386/x86-64: fix section mismatch WARNING: arch/x86_64/kernel/built-in.o - Section mismatch: reference to .init.text:mtrr_bp_init from .text between 'id entify_cpu' (at offset 0x6571) and 'IRQ0x20_interrupt' It's because identify_cpu() which is __cpuinit calls mtrr_bp_init() which is __init(). __cpuinit() expands to nothing if CONFIG_HOTPLUG_CPU=y and so the call is illegal. Signed-off-by: Bernhard Walle <bwalle@suse.de> Cc: Andi Kleen <ak@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 17 May 2007, 12:23:04 UTC |
| f363d16 | Aaron Durbin | 17 May 2007, 05:11:06 UTC | acpi: fix potential call to a freed memory section. Strip __cpuinit[data] from Node <-> PXM routines and supporting data structures. Also make pxm_to_node_map and node_to_pxm_map local to the numa acpi module. This fixes a bug triggered by the following conditions: - boot on a machine with a SLIT table defined - kernel is configured w/ CONFIG_HOTPLUG_CPU=n - cat /sys/devices/system/node/node*/distance This will cause an oops by calling into a freed memory section. In particular, on x86_64, __node_distance calls node_to_pxm(). Signed-off-by: Aaron Durbin <adurbin@google.com> Cc: Len Brown <lenb@kernel.org> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 17 May 2007, 12:23:04 UTC |
| 0aa817f | Christoph Lameter | 17 May 2007, 05:11:01 UTC | Slab allocators: define common size limitations Currently we have a maze of configuration variables that determine the maximum slab size. Worst of all it seems to vary between SLAB and SLUB. So define a common maximum size for kmalloc. For conveniences sake we use the maximum size ever supported which is 32 MB. We limit the maximum size to a lower limit if MAX_ORDER does not allow such large allocations. For many architectures this patch will have the effect of adding large kmalloc sizes. x86_64 adds 5 new kmalloc sizes. So a small amount of memory will be needed for these caches (contemporary SLAB has dynamically sizeable node and cpu structure so the waste is less than in the past) Most architectures will then be able to allocate object with sizes up to MAX_ORDER. We have had repeated breakage (in fact whenever we doubled the number of supported processors) on IA64 because one or the other struct grew beyond what the slab allocators supported. This will avoid future issues and f.e. avoid fixes for 2k and 4k cpu support. CONFIG_LARGE_ALLOCS is no longer necessary so drop it. It fixes sparc64 with SLAB. Signed-off-by: Christoph Lameter <clameter@sgi.com> Signed-off-by: "David S. Miller" <davem@davemloft.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 17 May 2007, 12:23:04 UTC |
| 3ec0974 | Christoph Lameter | 17 May 2007, 05:11:00 UTC | SLUB: Simplify debug code Consolidate functionality into the #ifdef section. Extract tracing into one subroutine. Move object debug processing into the #ifdef section so that the code in __slab_alloc and __slab_free becomes minimal. Reduce number of functions we need to provide stubs for in the !SLUB_DEBUG case. Signed-off-by: Christoph Lameter <clameter@sgi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 17 May 2007, 12:23:04 UTC |
| a35afb8 | Christoph Lameter | 17 May 2007, 05:10:57 UTC | Remove SLAB_CTOR_CONSTRUCTOR SLAB_CTOR_CONSTRUCTOR is always specified. No point in checking it. Signed-off-by: Christoph Lameter <clameter@sgi.com> Cc: David Howells <dhowells@redhat.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Steven French <sfrench@us.ibm.com> Cc: Michael Halcrow <mhalcrow@us.ibm.com> Cc: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Cc: Miklos Szeredi <miklos@szeredi.hu> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Roman Zippel <zippel@linux-m68k.org> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Dave Kleikamp <shaggy@austin.ibm.com> Cc: Trond Myklebust <trond.myklebust@fys.uio.no> Cc: "J. Bruce Fields" <bfields@fieldses.org> Cc: Anton Altaparmakov <aia21@cantab.net> Cc: Mark Fasheh <mark.fasheh@oracle.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Christoph Hellwig <hch@lst.de> Cc: Jan Kara <jack@ucw.cz> Cc: David Chinner <dgc@sgi.com> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 17 May 2007, 12:23:04 UTC |
| 5577bd8 | Christoph Lameter | 17 May 2007, 05:10:56 UTC | SLUB: Do our own flags based on PG_active and PG_error The atomicity when handling flags in SLUB is not necessary since both flags used by SLUB are not updated in a racy way. Flag updates are either done during slab creation or destruction or under slab_lock. Some of these flags do not have the non atomic variants that we need. So define our own. Signed-off-by: Christoph Lameter <clameter@sgi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 17 May 2007, 12:23:03 UTC |
| eefaca9 | Christoph Lameter | 17 May 2007, 05:10:55 UTC | SLUB: slabinfo fixes Align the output of % with K/M/G of sizes. Check for empty NUMA information to avoid segfault on !NUMA. -r should work directly not only if we match a single slab without additional options. Signed-off-by: Christoph Lameter <clameter@sgi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 17 May 2007, 12:23:03 UTC |
| ade3aff | Andrew Morton | 17 May 2007, 05:10:54 UTC | slub: fix handling of oversized slabs I'm getting zillions of undefined references to __kmalloc_size_too_large on alpha. For some reason alpha is building out-of-line copies of kmalloc_slab() into lots of compilation units. It turns out that gcc just isn't smart enough to work out that __builtin_contant_p(size)==true implies that __builtin_contant_p(index)==true. So let's give it a bit of help. Cc: Christoph Lameter <clameter@sgi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 17 May 2007, 12:23:03 UTC |
| 0b44f7a | Christoph Lameter | 17 May 2007, 05:10:53 UTC | slab: warn on zero-length allocations slub warns on this, and we're working on making kmalloc(0) return NULL. Let's make slab warn as well so our testers detect such callers more rapidly. Signed-off-by: Christoph Lameter <clameter@sgi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 17 May 2007, 12:23:03 UTC |
| 4b6f075 | Christoph Lameter | 17 May 2007, 05:10:53 UTC | SLUB: Define functions for cpu slab handling instead of using PageActive Use inline functions to access the per cpu bit. Intoduce the notion of "freezing" a slab to make things more understandable. Signed-off-by: Christoph Lameter <clameter@sgi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 17 May 2007, 12:23:03 UTC |
| 3ca12ee | Christoph Lameter | 17 May 2007, 05:10:52 UTC | SLAB: Move two remaining SLAB specific definitions to slab_def.h Two definitions remained in slab.h that are particular to the SLAB allocator. Move to slab_def.h Signed-off-by: Christoph Lameter <clameter@sgi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 17 May 2007, 12:23:03 UTC |
| 9fbf09a | Christoph Lameter | 17 May 2007, 05:10:51 UTC | SLUB: Remove depends on EXPERIMENTAL and !ARCH_USES_SLAB_PAGE_STRUCT No arch sets ARCH_USES_SLAB_PAGE_STRUCT anymore. Remove the experimental dependency as well since we want to have it as a real alternative to SLAB. It all comes down to killing a single line from init/Kconfig. Signed-off-by: Christoph Lameter <clameter@sgi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 17 May 2007, 12:23:03 UTC |
| c59def9 | Christoph Lameter | 17 May 2007, 05:10:50 UTC | Slab allocators: Drop support for destructors There is no user of destructors left. There is no reason why we should keep checking for destructors calls in the slab allocators. The RFC for this patch was discussed at http://marc.info/?l=linux-kernel&m=117882364330705&w=2 Destructors were mainly used for list management which required them to take a spinlock. Taking a spinlock in a destructor is a bit risky since the slab allocators may run the destructors anytime they decide a slab is no longer needed. Patch drops destructor support. Any attempt to use a destructor will BUG(). Acked-by: Pekka Enberg <penberg@cs.helsinki.fi> Acked-by: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Christoph Lameter <clameter@sgi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 17 May 2007, 12:23:03 UTC |
| afc0ced | Nick Piggin | 17 May 2007, 05:10:49 UTC | slob: implement RCU freeing The SLOB allocator should implement SLAB_DESTROY_BY_RCU correctly, because even on UP, RCU freeing semantics are not equivalent to simply freeing immediately. This also allows SLOB to be used on SMP. Signed-off-by: Nick Piggin <npiggin@suse.de> Acked-by: Matt Mackall <mpm@selenic.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 17 May 2007, 12:23:02 UTC |
| b2cd641 | Linus Torvalds | 17 May 2007, 04:28:49 UTC | Merge branch 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev * 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev: libata: track spindown status and skip spindown_compat if possible libata: fix shutdown warning message printing libata-acpi: add ATA_FLAG_ACPI_SATA port flag libata: during revalidation, check n_sectors after device is configured libata: separate out ata_dev_reread_id() pata_scc had been missed by ata_std_prereset() switch | 17 May 2007, 04:28:49 UTC |
| b17bfca | Linus Torvalds | 17 May 2007, 04:21:33 UTC | Merge branch 'linus' of master.kernel.org:/pub/scm/linux/kernel/git/perex/alsa * 'linus' of master.kernel.org:/pub/scm/linux/kernel/git/perex/alsa: [ALSA] usbaudio - Coping with short replies in usbmixer [ALSA] Include quirks from Ubuntu Dapper/Edgy/Feisty [ALSA] Fix probe of non-PnP ISA devices [ALSA] version 1.0.14rc4 [ALSA] hda-codec - Fix ALC882/861VD codec support on some laptops [ALSA] ASoC AC97 device reg bugfix [ALSA] ASoC AC97 static GPL symbol fix [ALSA] hda-codec - Make the mixer capability check more robust [ALSA] usb-audio: another Logitech QuickCam ID | 17 May 2007, 04:21:33 UTC |
| 36dbe4d | Linus Torvalds | 17 May 2007, 04:20:28 UTC | Merge branch 'for-linus' of git://www.atmel.no/~hskinnemoen/linux/kernel/avr32 * 'for-linus' of git://www.atmel.no/~hskinnemoen/linux/kernel/avr32: [AVR32] Implement platform hooks for atmel_lcdfb driver [AVR32] Wire up signalfd, timerfd and eventfd [AVR32] optimize pagefault path [AVR32] Remove bogus comment in arch/avr32/kernel/irq.c | 17 May 2007, 04:20:28 UTC |
| e0f88db | Linus Torvalds | 17 May 2007, 04:19:45 UTC | Merge master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6 * master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6: [SPARC64]: Add hypervisor API negotiation and fix console bugs. | 17 May 2007, 04:19:45 UTC |
| 43c0f3d | Christoph Lameter | 16 May 2007, 06:57:09 UTC | Fix: find_or_create_page skips cpuset memory spreading. We call alloc_page where we should be calling __page_cache_alloc. __page_cache_alloc performs cpuset memory spreading. alloc_page does not. There is no reason that pages allocated via find_or_create should be exempt. Signed-off-by: Christoph Lameter <clameter@sgi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 17 May 2007, 04:19:15 UTC |
| 8382d2b | Andrew Morton | 16 May 2007, 06:57:08 UTC | parport_pc needs dma-mapping.h alpha: drivers/parport/parport_pc.c: In function 'parport_pc_fifo_write_block_dma': drivers/parport/parport_pc.c:636: warning: implicit declaration of function 'dma_map_single' drivers/parport/parport_pc.c:637: error: 'DMA_TO_DEVICE' undeclared (first use in this function) drivers/parport/parport_pc.c:637: error: (Each undeclared identifier is reported only once drivers/parport/parport_pc.c:637: error: for each function it appears in.) Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 17 May 2007, 04:19:15 UTC |
| 0a4dd77 | Domen Puncer | 16 May 2007, 06:57:05 UTC | spi: fix spidev for >sizeof(long)/32 devices find_first_zero_bit accepts number of bits, not longs. Signed-off-by: Domen Puncer <domen.puncer@telargo.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 17 May 2007, 04:19:15 UTC |
| bb33ed6 | David Howells | 16 May 2007, 06:57:04 UTC | AFS: Fix afs_prepare_write() afs_prepare_write() should not mark a page up to date if it only partially fills it in, in expectation of the caller filling in the rest prior to calling commit_write(). commit_write(), however, should mark the page up to date. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 17 May 2007, 04:19:15 UTC |
| 1800782 | Hugh Dickins | 16 May 2007, 06:57:04 UTC | slub: don't confuse ctor and dtor kmem_cache_create() was swapping ctor and dtor in calling find_mergeable(): though it caused no bug, and probably never would, even if destructors are retained; but fix it so as not to generate anxiety ;) Signed-off-by: Hugh Dickins <hugh@veritas.com> Cc: Christoph Lameter <clameter@sgi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 17 May 2007, 04:19:15 UTC |
| 1abd727 | Christoph Lameter | 16 May 2007, 06:57:03 UTC | SLUB: It is legit to allocate a slab of the maximum permitted size Sorry I screwed up the comparison. It is only an error if we attempt to allocate a slab larger than the maximum allowed size. Signed-off-by: Christoph Lameter <clameter@sgi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 17 May 2007, 04:19:15 UTC |
| faab83b | David Howells | 16 May 2007, 06:57:02 UTC | AFS: write back dirty data on unmount Fix AFS to write back dirty on unmounting. This didn't happen because afs_super_ops.drop_inode was pointing to generic_delete_inode. Now this pointer is left set to NULL so that the default behaviour occurs instead. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 17 May 2007, 04:19:15 UTC |
| 5b58e21 | Linus Torvalds | 17 May 2007, 04:15:18 UTC | Merge branch 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6 * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6: [IA64] optimize pagefaults a little [IA64] Fix section conflict of ia64_mlogbuf_finish [IA64] s/scalibility/scalability/ [IA64] kdump on INIT needs multi-nodes sync-up (v.2) [IA64] wire up {signal,timer,event}fd syscalls [IA64] spelling fixes: arch/ia64/ | 17 May 2007, 04:15:18 UTC |
| 52ade9b | Linus Torvalds | 16 May 2007, 22:28:14 UTC | Fix ACPI suspend / device suspend ordering problem In commit e3c7db621bed4afb8e231cb005057f2feb5db557 we fixed the resume ordering, so that the ACPI low-level resume code was called before the actual driver resume was called. However, that broke the nesting logic of suspend and resume, and we continued to suspend the devices _after_ we the ACPI device suspend code was called. That resulted in us saving PCI state for devices that had already been changed by ACPI, and in some cases disabled entirely (causing the PCI save_state to be all-ones). Which in turn caused the wrong state to be written back on resume. This moves the ACPI device suspend to after the device model per-device suspend() calls. This fixes the bogus state save. Thanks to Lukáš Hejtmánek for testing. Acked-by: Lukas Hejtmanek <xhejtman@ics.muni.cz> Acked-by: Rafael J. Wysocki <rjw@sisk.pl> Cc: Len Brown <len.brown@intel.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Greg KH <greg@kroah.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 16 May 2007, 22:33:19 UTC |
| 576fe0b | Christoph Hellwig | 16 May 2007, 12:52:19 UTC | [IA64] optimize pagefaults a little Get rid of the notifier list and call the kprobes code directly if compiled in. This mirrors the changes that recently went into powerpc, s390 and sparc64. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Tony Luck <tony.luck@intel.com> | 16 May 2007, 16:00:51 UTC |
| a04395e | Thomas Reitmayr | 15 May 2007, 09:47:48 UTC | [ALSA] usbaudio - Coping with short replies in usbmixer This patch makes sure that short USB replies are treated as an error when requesting the value of a certain mixer control. Signed-off-by: Thomas Reitmayr <thomas@devbase.at> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz> | 16 May 2007, 10:23:20 UTC |
| 8286c53 | Daniel T Chen | 15 May 2007, 09:46:23 UTC | [ALSA] Include quirks from Ubuntu Dapper/Edgy/Feisty Included is a patch against current alsa-kernel hg tip adding quirks that Ubuntu Dapper/Edgy/Feisty contains. Signed-off-by: Daniel T Chen <crimsun@ubuntu.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz> | 16 May 2007, 10:23:03 UTC |
| 609d769 | Rene Herman | 15 May 2007, 09:42:56 UTC | [ALSA] Fix probe of non-PnP ISA devices isa_register_driver() returns an error if no device is found and it's no fatal error for the drivers with pnp support. Signed-off-by: Rene Herman <rene.herman@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz> | 16 May 2007, 10:22:44 UTC |
| 60af15f | Jaroslav Kysela | 16 May 2007, 09:45:47 UTC | [ALSA] version 1.0.14rc4 Signed-off-by: Jaroslav Kysela <perex@suse.cz> | 16 May 2007, 09:45:47 UTC |
| 272a527 | Kailang Yang | 14 May 2007, 09:00:38 UTC | [ALSA] hda-codec - Fix ALC882/861VD codec support on some laptops Fixed some platform no sound and Add JD Function for below platform list: Sony(0x104d) 0x9015, 0x900e, 0x1f00 Toshiba(0x1179) DALLAS 0xff00, 0xff01 Targa(0x1462) 0x28fb Asus(0x1043) A7J 0x060d Lenovo(0x17aa) 0x3bfd, 0x2085 MEDION(0x17c0) MD2 0x4071 Signed-off-by: Kailang Yang <kailang@realtek.com.tw> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz> | 16 May 2007, 09:45:29 UTC |
| a68660e | Liam Girdwood | 10 May 2007, 17:27:27 UTC | [ALSA] ASoC AC97 device reg bugfix This patch fixes a bug whereby AC97 bus device data was being clobbered when AC97 codecs using the generic ac97_codec.c driver were being registered. Codecs that didn't use the generic driver were unaffected (e.g. WM9712, WM9713). Changes:- o Add new AC97 codec class for custom (or need bus dev registration) AC97 codecs. o Only register/deregister this custom codec device with the AC97 bus. The generic AC97 driver already does this for generic codec devices. This may be related to bug #3038 :- https://bugtrack.alsa-project.org/alsa-bug/view.php?id=3038 Signed-off-by: Liam Girdwood <lg@opensource.wolfsonmicro.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz> | 16 May 2007, 09:45:28 UTC |
| 9ae67c7 | Liam Girdwood | 10 May 2007, 15:12:31 UTC | [ALSA] ASoC AC97 static GPL symbol fix This patch fixes a bug whereby the GPL'ed symbol ac97_dai was being declared as static. Signed-off-by: Liam Girdwood <lg@opensource.wolfsonmicro.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz> | 16 May 2007, 09:45:28 UTC |
| b75e53f | Takashi Iwai | 10 May 2007, 14:56:09 UTC | [ALSA] hda-codec - Make the mixer capability check more robust In some cases, mixer elements return -EINVAL because it couldn't obtain proper amp_cap bits. The patch improves the robustness, trying the amp_cap query again in such a case. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz> | 16 May 2007, 09:45:28 UTC |
| d417045 | Daniel Drake | 10 May 2007, 06:52:19 UTC | [ALSA] usb-audio: another Logitech QuickCam ID This patch adds the ID for another quickcam microphone, reported by freqmod on ALSA ticket #0003040 I'm going to submit a USB patch separately to provide a macro to simplify these entries, as suggested by Alan Stern. We could switch to using that in future. Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz> | 16 May 2007, 09:45:28 UTC |
| 13b8d09 | Tejun Heo | 15 May 2007, 10:29:22 UTC | libata: track spindown status and skip spindown_compat if possible Our assumption that most distros issue STANDBYNOW seems wrong. The upstream sysvinit and thus many distros including gentoo and opensuse don't take any action for libata disks on spindown. We can skip compat handling for these distros so that they don't need to update anything to take advantage of kernel-side shutdown. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org> | 16 May 2007, 05:18:31 UTC |
| da071b4 | Tejun Heo | 14 May 2007, 15:26:18 UTC | libata: fix shutdown warning message printing Unlocking ap->lock and ssleeping don't work because SCSI commands can be issued from completion path without context. Reimplement delayed completion by allowing translation functions to override qc->scsidone(), storing the original completion function to scmd->scsi_done() and overriding qc->scsidone() with a function which schedules delayed invocation of scmd->scsi_done(). This isn't pretty at all but all the ugly parts are thankfully contained in the stop translation path where the compat feature is implemented. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org> | 16 May 2007, 05:18:31 UTC |
| 3cadbcc | Tejun Heo | 14 May 2007, 18:28:15 UTC | libata-acpi: add ATA_FLAG_ACPI_SATA port flag Whether a controller needs IDE or SATA ACPI hierarchy is determined by the programming interface of the controller not by whether the controller is SATA or PATA, or it supports slave device or not. This patch adds ATA_FLAG_ACPI_SATA port flags which tells libata-acpi that the port needs SATA ACPI nodes, and sets the flag for ahci and sata_sil24. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org> | 16 May 2007, 05:18:31 UTC |
| 6ddcd3b | Tejun Heo | 14 May 2007, 18:28:15 UTC | libata: during revalidation, check n_sectors after device is configured Device might be resized during ata_dev_configure() due to HPA or (later) ACPI _GTF. Currently it's worked around by caching n_sectors before turning off HPA. The cached original size is overwritten if the device is reconfigured without being hardreset - which always happens after configuring trasnfer mode. If the device gets hardreset for some reason after that, revalidation fails with -ENODEV. This patch makes size checking more robust by moving n_sectors check from ata_dev_reread_id() to ata_dev_revalidate() after the device is fully configured. No matter what happens during configuration, a device must have the same n_sectors after fully configured to be treated as the same device. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org> | 16 May 2007, 05:18:30 UTC |
| fe30911 | Tejun Heo | 14 May 2007, 18:28:15 UTC | libata: separate out ata_dev_reread_id() Separate out ata_dev_reread_id() from ata_dev_revalidate(). ata_dev_reread_id() reads IDENTIFY page and determines whether the same device is still there. ata_dev_revalidate() reconfigures after reread completes. This will be used by ACPI update. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org> | 16 May 2007, 05:18:30 UTC |
| d1c68fa | Al Viro | 15 May 2007, 07:21:17 UTC | pata_scc had been missed by ata_std_prereset() switch Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Jeff Garzik <jeff@garzik.org> | 16 May 2007, 05:18:30 UTC |
| c7754d4 | David S. Miller | 16 May 2007, 00:03:54 UTC | [SPARC64]: Add hypervisor API negotiation and fix console bugs. Hypervisor interfaces need to be negotiated in order to use some API calls reliably. So add a small set of interfaces to request API versions and query current settings. This allows us to fix some bugs in the hypervisor console: 1) If we can negotiate API group CORE of at least major 1 minor 1 we can use con_read and con_write which can improve console performance quite a bit. 2) When we do a console write request, we should hold the spinlock around the whole request, not a byte at a time. What would happen is that it's easy for output from different cpus to get mixed with each other. 3) Use consistent udelay() based polling, udelay(1) each loop with a limit of 1000 polls to handle stuck hypervisor console. Signed-off-by: David S. Miller <davem@davemloft.net> | 16 May 2007, 03:23:02 UTC |
| 7b104bc | Al Viro | 15 May 2007, 19:37:20 UTC | arm: walk_stacktrace() needs to be exported oprofile depends on having it Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 16 May 2007, 01:56:37 UTC |
| ecec5ba | Al Viro | 15 May 2007, 19:36:00 UTC | fix uml-x86_64 __NR_syscall_max is done in x86_64 asm-offsets; do an equivalent in uml kern_constants.h Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Acked-by: Jeff Dike <jdike@addtoit.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 16 May 2007, 01:56:37 UTC |
| 327b9ee | Al Viro | 15 May 2007, 19:37:10 UTC | audit_match_signal() and friends are used only if CONFIG_AUDITSYSCALL is set Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 16 May 2007, 01:56:37 UTC |
| b4e1ded | Al Viro | 15 May 2007, 19:37:00 UTC | m32r: __xchg() should be always_inline it depends on elimination of unreachable branches in switch (by object size), so we must declare it always_inline Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Acked-by: Hirokazu Takata <takata@linux-m32r.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 16 May 2007, 01:56:37 UTC |
| 8eafafb | Al Viro | 15 May 2007, 19:36:50 UTC | rpadlpar breakage - fallout of struct subsystem removal Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 16 May 2007, 01:56:37 UTC |
| 1b2bad2 | Al Viro | 15 May 2007, 19:36:40 UTC | em28xx and ivtv should depend on PCI .. because video-buf.c requires PCI, and VIDEO_EM28XX selects it. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 16 May 2007, 01:56:37 UTC |
| 9cbe05c | Al Viro | 15 May 2007, 19:36:30 UTC | missing includes in mlx4 Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Acked-by: Jeff Garzik <jeff@garzik.org> Acked-by: Roland Dreier <rolandd@cisco.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 16 May 2007, 01:56:37 UTC |
| 7a86ede | Al Viro | 15 May 2007, 19:36:20 UTC | missing dependencies for USB drivers in input stuff that does select USB should depend on USB_ARCH_HAS_HCD, or we'll end up with unbuildable configs. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 16 May 2007, 01:56:37 UTC |
| faa2fb4 | Al Viro | 15 May 2007, 19:36:10 UTC | missing mm.h in fw-ohci need it for page_private(), not all targets have it pulled indirectly Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 16 May 2007, 01:56:37 UTC |
| 835a906 | Linus Torvalds | 16 May 2007, 01:50:19 UTC | Merge master.kernel.org:/pub/scm/linux/kernel/git/lethal/sh64-2.6 * master.kernel.org:/pub/scm/linux/kernel/git/lethal/sh64-2.6: sh64: Add .gitignore entry for syscalltab. sh64: generic quicklist support. sh64: Update cayman defconfig. sh64: Fixup sh-sci build. sh64: ppoll/pselect6() and restartable syscalls. sh64: dma-mapping updates. sh64: Fixups for the irq_regs changes. sh64: Wire up many new syscalls. spelling fixes: arch/sh64/ sh64: ROUND_UP macro cleanup in arch/sh64/kernel/pci_sh5.c | 16 May 2007, 01:50:19 UTC |
| e089d43 | Linus Torvalds | 16 May 2007, 01:47:21 UTC | Merge master.kernel.org:/pub/scm/linux/kernel/git/bart/ide-2.6 * master.kernel.org:/pub/scm/linux/kernel/git/bart/ide-2.6: Use menuconfig objects: IDE sl82c105: Switch to ref counting API ide: remove ide_use_dma() ide: add missing validity checks for identify words 62 and 63 ide: remove ide_dma_enable() sl82c105: add speedproc() method and MWDMA0/1 support cs5530/sc1200: add ->speedproc support cs5530/sc1200: DMA support cleanup ide: use ide_tune_dma() part #2 cs5530/sc1200: add ->udma_filter methods ide: always disable DMA before tuning it pdc202xx_new: use ide_tune_dma() alim15x3: use ide_tune_dma() sis5513: PIO mode setup fixes serverworks: PIO mode setup fixes pdc202xx_old: rewrite mode programming code (v2) | 16 May 2007, 01:47:21 UTC |
| 0e402c6 | Linus Torvalds | 16 May 2007, 01:46:25 UTC | Merge branch 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6 * 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6: ucc_geth: eliminate max-speed, change interface-type to phy-connection-type smc911x: fix compilation breakage pasemi_mac: Fix local-mac-address parsing pasemi_mac: Terminate PCI ID list pasemi_mac: Interrupt ack fixes pasemi_mac: Fix register defines | 16 May 2007, 01:46:25 UTC |
| 28aa483 | Linus Torvalds | 16 May 2007, 01:45:49 UTC | x86: Fix discontigmem + non-HIGHMEM compile It's not necessarily a very sane configuration, but people running "make randconfig" noticed it wouldn't compile. This fixes some obvious problems in discontig.c to allow a clean compile. Acked-by: andrew hendry <andrew.hendry@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 16 May 2007, 01:45:49 UTC |
| e0ff9cd | Jan Engelhardt | 15 May 2007, 22:51:46 UTC | Use menuconfig objects: IDE Use menuconfigs instead of menus, so the whole menu can be disabled at once instead of going through all options. Signed-off-by: Jan Engelhardt <jengelh@gmx.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> | 15 May 2007, 22:51:46 UTC |
| 640b31b | Alan Cox | 15 May 2007, 22:51:46 UTC | sl82c105: Switch to ref counting API Not sure how this one got missed in the great purge some time ago but it did. Signed-off-by: Alan Cox <alan@redhat.com> Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> | 15 May 2007, 22:51:46 UTC |
| 122ab08 | Bartlomiej Zolnierkiewicz | 15 May 2007, 22:51:46 UTC | ide: remove ide_use_dma() ide_use_dma() duplicates a lot of ide_max_dma_mode() functionality and as all users of ide_use_dma() were converted to use ide_tune_dma() now it is possible to add missing checks to ide_tune_dma() and remove ide_use_dma() completely, so do it. There should be no functionality changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> | 15 May 2007, 22:51:46 UTC |
