Revision d4d31767c31f3279381cf9cdcae74b033e71c9b3 authored by Garrett 'Karto' Keating on 29 December 2022, 23:39:31 UTC, committed by Garrett 'Karto' Keating on 29 December 2022, 23:39:31 UTC
1 parent e13c667
mwa_beam.py
# -*- mode: python; coding: utf-8 -*-
# Copyright (c) 2019 Radio Astronomy Software Group
# Licensed under the 2-clause BSD License
"""Read in the Sujinto et al. full embedded element MWA Beam."""
import os
import warnings
import h5py
import numpy as np
from scipy.special import factorial, lpmv # associated Legendre function
from .. import utils as uvutils
from . import UVBeam
__all__ = ["P1sin", "P1sin_array", "MWABeam"]
def P1sin(nmax, theta):
"""
Create the Legendre function flavors for FF expansion using spherical waves.
Note this is not vectorized so is a bit slow, but it handles the special
case of theta = 0 and pi. We primarily use the vectorized version
(`P1sin_array`), but call this to handle the special cases.
See:
Calculating Far-Field Radiation Based on FEKO Spherical Wave Coefficients,
draft 10 June 2015.
Available at pyuvdata/docs/references/Far_field_spherical_FEKO_draft2.pdf
This memo gives a full description of the equations implemented here,
including descriptions of the approximations and numerical approaches used.
In line comments below are helpful reminders, but see the memo for the full
detail.
Also see Sokolowski, M. et al, "Calibration and Stokes Imaging with Full
Embedded Element Primary Beam Model for the Murchison Widefield Array",
PASA, 2017 (10.1017/pasa.2017.54) for details specific to the MWA.
Parameters
----------
nmax : int
Maximum n from FEKO Q1mn and Q2mn, n must be >=1
theta : float
The argument of the cosine or sine function used in the associated
Legendre functions, in radians.
Returns
-------
P_sin : array of float
P_{n}^{abs(m)}(cos(theta))/sin(theta) with FEKO order M,N.
Shape (nmax ** 2 + 2 * nmax).
P1 : array of float
P_{n}^{abs(m)+1}(cos(theta)) with FEKO order M,N.
Shape (nmax ** 2 + 2 * nmax).
"""
# initialize for nmax, we have 2(1+...+nmax)+nmax=nmax^2+2*nmax long array
P_sin = np.zeros((nmax**2 + 2 * nmax))
P1 = np.zeros((nmax**2 + 2 * nmax))
# theta arguments
cos_th = np.cos(theta)
sin_th = np.sin(theta)
delta_cos = 1e-6 # for slope estimation
# step from 1 to nmax
for n in range(1, nmax + 1):
# legendre P_{n}^{abs(m)=0...n} (cos_th)
orders = np.arange(0, n + 1)
orders = orders.reshape(n + 1, 1)
P = lpmv(orders, n, cos_th)
# THESE ARE THE SAME:
# legendre(2,0:0.1:0.2) (matlab)
# scipy:
# a=np.arange(0,3)
# a=a.reshape(3,1)
# lpmv(b,2,np.arange(0,0.3,0.1))
# P_{n}^{abs(m)+1} (cos_th)
Pm1 = np.append(P[1::], 0)
Pm1 = Pm1.reshape(len(Pm1), 1)
# P_{n}^{abs(m)}(cos_th)/sin_th
Pm_sin = np.zeros((n + 1, 1)) # initialize
if cos_th == 1:
# special treatment depending on m;
# for m=0, Pm_sin=inf so, the product m*Pm_sin is zero;
# for m=1, we need a substitution
# m>=2, value is 0, so initial values are OK
# The first approach, to just use the analytical derivative
# is not stable for n>~45
# Instead use slope estimate with a small delta_cos
# Pn(cos x)/sin x = -dPn(cos_th)/dcos_th
Pm_cos_delta_cos = lpmv(orders, n, cos_th - delta_cos)
# backward difference
Pm_sin[1, 0] = -(P[0] - Pm_cos_delta_cos[0]) / delta_cos
elif cos_th == -1:
# The first approach, to just use the analytical derivative
# is not stable for n>~45
# Instead use slope estimate with a small delta_cos
# Pn(cos x)/sin x = -dPn(cos_th)/dcos_th
Pm_cos_delta_cos = lpmv(orders, n, cos_th - delta_cos)
# forward difference
Pm_sin[1, 0] = -(Pm_cos_delta_cos[0] - P[0]) / delta_cos
else:
Pm_sin = P / sin_th
# accumulate Psin and P1 for the m values
ind_start = (n - 1) ** 2 + 2 * (n - 1) # start index to populate
ind_stop = n**2 + 2 * n # stop index to populate
# assign
P_sin[np.arange(ind_start, ind_stop)] = np.append(
np.flipud(Pm_sin[1::, 0]), Pm_sin
)
P1[np.arange(ind_start, ind_stop)] = np.append(np.flipud(Pm1[1::, 0]), Pm1)
return P_sin, P1
def P1sin_array(nmax, theta):
"""
Calculate P^abs(m)_n(cos(theta))/sin(theta) and P^(abs(m)+1)_n(cos(theta)).
Similar to the "P1sin" function, but calculates for all theta in one go.
At the end of the function, patches are made using the original P1sin function
to solve the 0/0 issue.
Parameters
----------
nmax : int
Maximum n from FEKO Q1mn and Q2mn, n must be >=1
theta : array of float
The argument of the cosine or sine functions used in the associated
Legendre functions, in radians.
Returns
-------
P_sin : array of float
P_{n}^{abs(m)}(cos(theta))/sin(theta) with FEKO order M,N.
Shape (nmax ** 2 + 2 * nmax, theta.size).
P1 : array of float
P_{n}^{abs(m)+1}(cos(theta)) with FEKO order M,N.
Shape (nmax ** 2 + 2 * nmax, theta.size).
"""
cos_th = np.cos(theta)
sin_theta = np.sin(theta)
# Make sure that we don't divide by 0 (sin(0) = sin(pi) = 0 ) proper results
# are inserted at the end of this function. Set to NaN for now
sin_theta[(theta == 0) | (theta == np.pi)] = np.NaN
# create at forehand
P_sin = np.zeros((nmax**2 + 2 * nmax, np.size(theta)))
P1 = np.zeros((nmax**2 + 2 * nmax, np.size(theta)))
for n in range(1, nmax + 1):
# legendre P_{n}^{abs(m)=0...n} (cos_th)
orders = np.arange(0, n + 1)
orders = orders.reshape(n + 1, 1)
# fetch entire matrix in one go (for a particular n)
# in theory, fetching for all n in one go should also be possible
P = lpmv(orders, n, cos_th)
# P_{n}^{abs(m)+1} (cos_th)
Pm1 = np.vstack([P[1::, :], np.zeros((1, np.size(theta)))])
# P_{n}^{abs(m)}(u)/sin_th
Pm_sin = P / sin_theta
# accumulate Psin and P1 for the m values
# start index to populate
ind_start = (n - 1) ** 2 + 2 * (n - 1)
# stop index to populate
ind_stop = n**2 + 2 * n
# assign
P_sin[np.arange(ind_start, ind_stop), :] = np.vstack(
[np.flipud(Pm_sin[1::, :]), Pm_sin]
)
P1[np.arange(ind_start, ind_stop), :] = np.vstack([np.flipud(Pm1[1::, :]), Pm1])
# fix for theta = 0 and theta = pi
# (properly handled in P1sin, so use that function)
P_sin[:, theta == 0] = np.array([P1sin(nmax, 0)[0]]).transpose()
P_sin[:, theta == np.pi] = np.array([P1sin(nmax, np.pi)[0]]).transpose()
return P_sin.transpose(), P1.transpose()
class MWABeam(UVBeam):
"""
Defines an MWA-specific subclass of UVBeam for representing MWA beams.
This class should not be interacted with directly, instead use the
read_mwa_beam method on the UVBeam class.
This is based on https://github.com/MWATelescope/mwa_pb/ but we don’t import
that module because it’s not python 3 compatible.
Note that the azimuth convention in for the UVBeam object is different than the
azimuth convention in the mwa_pb repo. In that repo, the azimuth convention is
changed from the native FEKO convention (the FEKO convention is the same as the
UVBeam convention). The convention in the mwa_pb repo has a different zero point
and a different direction (so it is in a left handed coordinate system).
"""
def _read_metadata(self, h5filepath):
"""
Get metadata (frequencies, polarizations, dipole numbers) from input file.
Parameters
----------
h5filepath : str
path to input h5 file containing the MWA full embedded element spherical
harmonic modes.
Returns
-------
freqs_hz : array of int
Frequencies in Hz present in the file.
pol_names : list of str
Polarizations present in the file.
dipole_names :
Dipoles names present in the file.
max_length : dict
Dictionary keyed on pol and freq, giving max number of modes in the
file for each pol and freq.
"""
pol_names = set()
dipole_names = set()
freqs_hz = set()
other_names = []
max_length = {}
with h5py.File(h5filepath, "r") as h5f:
for name in h5f.keys():
if name.startswith("X") or name.startswith("Y"):
pol = name[0]
dipole, freq = name[1:].split("_")
pol_names.add(pol)
dipole_names.add(dipole)
freq = np.int64(freq)
freqs_hz.add(freq)
if pol not in max_length:
max_length[pol] = {}
this_length = h5f[name].shape[1] // 2
if freq not in max_length[pol]:
max_length[pol][freq] = this_length
elif this_length > max_length[pol][freq]:
max_length[pol][freq] = this_length
else:
other_names.append(name)
pol_names = sorted(pol_names)
dipole_names = np.array(sorted(dipole_names))
freqs_hz = np.array(sorted(freqs_hz))
return freqs_hz, pol_names, dipole_names, max_length
def _get_beam_modes(
self,
h5filepath,
freqs_hz,
pol_names,
dipole_names,
max_length,
delays,
amplitudes,
):
"""
Get beam modes from input file and save as a dict to the object.
Parameters
----------
h5filepath : str
path to input h5 file containing the MWA full embedded element spherical
harmonic modes.
freqs_hz : array of int
Frequencies in Hz to get modes for. Must be present in the file.
pol_names : list of str
Polarizations to get modes for. Must be present in the file.
dipole_names : array of str
Dipoles names present in the file.
max_length : dict
Dictionary keyed on pol and freq, giving max number of modes in the
file for each pol and freq.
delays : array of ints
Array of MWA beamformer delay steps. Should be shape (n_pols, n_dipoles).
amplitudes : array of floats
Array of dipole amplitudes, these are absolute values
(i.e. relatable to physical units). Should be shape (n_pols, n_dipoles).
Returns
-------
beam_modes : dict
A multi-level dict keyed on (in order) pol, freq, mode name (Q1, Q2, M, N).
"""
beam_modes = {}
for pol_i, pol in enumerate(pol_names):
beam_modes[pol] = {}
for freq in freqs_hz:
# Calculate complex excitation voltages
# convert delay to phase
# 435e-12 is the delay step size in seconds (435 picosec)
phases = 2 * np.pi * freq * (-delays[pol_i, :]) * 435e-12
# complex excitation col voltage
Vcplx = amplitudes[pol_i, :] * np.exp(1.0j * phases)
Q1_accum = np.zeros(max_length[pol][freq], dtype=np.complex128)
Q2_accum = np.zeros(max_length[pol][freq], dtype=np.complex128)
# Read in modes
with h5py.File(h5filepath, "r") as h5f:
Q_modes_all = h5f["modes"][()].T
Nmax = 0
M_accum = None
N_accum = None
for dp_i, dp in enumerate(dipole_names):
# re-initialise Q1 and Q2 for every dipole
Q1 = np.zeros(max_length[pol][freq], dtype=np.complex128)
Q2 = np.zeros(max_length[pol][freq], dtype=np.complex128)
# select spherical wave table
name = pol + dp + "_" + str(freq)
Q_all = h5f[name][()].T
# current length
my_len = np.max(Q_all.shape)
my_len_half = my_len // 2
# Get modes for this dipole
Q_modes = Q_modes_all[0:my_len, :]
# convert Qall to M, N, Q1, Q2 vectors for processing
# find s=1 and s=2 indices
# only find s1 and s2 for this dipole
# s = 1 and s = 2 refer to TE and TM modes, respectively
# see the Far_field_spherical_FEKO_draft2 memo under
# pyuvdata/docs/references/
s1 = Q_modes[0:my_len, 0] <= 1
s2 = Q_modes[0:my_len, 0] > 1
# grab m,n vectors
M = Q_modes[s1, 1]
N = Q_modes[s1, 2]
# update to the larger M and N
if np.max(N) > Nmax:
M_accum = M
N_accum = N
Nmax = np.max(N_accum)
# grab Q1mn and Q2mn and make them complex
Q1[0:my_len_half] = Q_all[s1, 0] * np.exp(
1.0j * np.deg2rad(Q_all[s1, 1])
)
Q2[0:my_len_half] = Q_all[s2, 0] * np.exp(
1.0j * np.deg2rad(Q_all[s2, 1])
)
# accumulate Q1 and Q2, scaled by excitation voltage
Q1_accum = Q1_accum + Q1 * Vcplx[dp_i]
Q2_accum = Q2_accum + Q2 * Vcplx[dp_i]
beam_modes[pol][freq] = {
"Q1": Q1_accum,
"Q2": Q2_accum,
"M": M_accum,
"N": N_accum,
}
return beam_modes
def _get_response(self, freqs_hz, pol_names, beam_modes, phi_arr, theta_arr):
"""
Calculate full Jones matrix response (E-field) of beam on a regular az/za grid.
Parameters
----------
freqs_hz : array of int
Frequencies in Hz to get modes for. Must be present in the file.
pol_names : list of str
Polarizations to get modes for. Must be present in the file.
beam_modes : dict
A multi-level dict keyed on (in order) pol, freq, mode name (Q1, Q2, M, N).
phi_arr : float or array of float
azimuth angles (radians), east through north.
theta_arr : float or array of float
zenith angles (radian)
Returns
-------
jones : array of float
jones vectors, shape (Npol, 2, Nfreq, Nphi, Ntheta), e.g.
[J_11=Xtheta J_12=Xphi]
[J_21=Ytheta J_21=Yphi]
"""
jones = np.zeros(
(len(pol_names), 2, freqs_hz.size, phi_arr.size, theta_arr.size),
dtype=np.complex128,
)
for pol_i, pol in enumerate(pol_names):
for freq_i, freq in enumerate(freqs_hz):
M = beam_modes[pol][freq]["M"]
N = beam_modes[pol][freq]["N"]
Q1 = beam_modes[pol][freq]["Q1"]
Q2 = beam_modes[pol][freq]["Q2"]
# form P(cos(theta))/(sin\theta) and P^{m+1}(cos(theta))with
# FEKO M,N order
nmax = int(np.max(N))
assert (
np.max(N) - nmax == 0
), "The maximum of N should be an integer value!"
# calculate equation C_mn from equation 4 of
# pyuvdata/docs/references/Far_field_spherical_FEKO_draft2.pdf
# These are the normalization factors for the associated
# Legendre function of order n and rank abs(m)
C_MN = (
0.5 * (2 * N + 1) * factorial(N - abs(M)) / factorial(N + abs(M))
) ** 0.5
# 1 for M<=0, -1 for odd M>0
MabsM = np.ones(M.shape)
MabsM[(M > 0) & (M % 2 != 0)] = -1
# nomenclature:
# T and P are the sky polarisations theta and phi
# theta and phi are direction coordinates
phi_comp = np.ascontiguousarray(
np.exp(1.0j * np.outer(phi_arr, range(-nmax, nmax + 1)))
)
(P_sin, P1) = P1sin_array(nmax, theta_arr)
M_u = np.outer(np.cos(theta_arr), np.abs(M))
phi_const = C_MN * MabsM / (N * (N + 1)) ** 0.5
emn_T = (
(1.0j) ** N * (P_sin * (M_u * Q2 - M * Q1) + Q2 * P1) * phi_const
)
emn_P = (
(1.0j) ** (N + 1)
* (P_sin * (M * Q2 - Q1 * M_u) - Q1 * P1)
* phi_const
)
# Use a matrix multiplication to calculate Emn_P and Emn_T.
# Sum results of Emn_P and emn_T for each unique M
emn_P_sum = np.zeros(
(len(theta_arr), 2 * nmax + 1), dtype=np.complex128
)
emn_T_sum = np.zeros(
(len(theta_arr), 2 * nmax + 1), dtype=np.complex128
)
for m in range(-nmax, nmax + 1):
emn_P_sum[:, m + nmax] = np.sum(emn_P[:, M == m], axis=1)
emn_T_sum[:, m + nmax] = np.sum(emn_T[:, M == m], axis=1)
Sigma_P = np.inner(phi_comp, emn_P_sum)
Sigma_T = np.inner(phi_comp, emn_T_sum)
jones[pol_i, 0, freq_i] = Sigma_T
jones[pol_i, 1, freq_i] = -Sigma_P
return jones
def read_mwa_beam(
self,
h5filepath,
use_future_array_shapes=False,
delays=None,
amplitudes=None,
pixels_per_deg=5,
freq_range=None,
run_check=True,
check_extra=True,
run_check_acceptability=True,
check_auto_power=True,
fix_auto_power=True,
):
"""
Read in the full embedded element MWA beam.
Parameters
----------
h5filepath : str
path to input h5 file containing the MWA full embedded element spherical
harmonic modes. Download via
`wget http://cerberus.mwa128t.org/mwa_full_embedded_element_pattern.h5`
use_future_array_shapes : bool
Option to convert to the future planned array shapes before the changes go
into effect by removing the spectral window axis.
delays : array of ints
Array of MWA beamformer delay steps. Should be shape (n_pols, n_dipoles).
amplitudes : array of floats
Array of dipole amplitudes, these are absolute values
(i.e. relatable to physical units).
Should be shape (n_pols, n_dipoles).
pixels_per_deg : float
Number of theta/phi pixels per degree. Sets the resolution of the beam.
freq_range : array_like of float
Range of frequencies to include in Hz, defaults to all available
frequencies. Must be length 2.
run_check : bool
Option to check for the existence and proper shapes of
required parameters after reading in the file.
check_extra : bool
Option to check optional parameters as well as required ones.
run_check_acceptability : bool
Option to check acceptable range of the values of
required parameters after reading in the file.
check_auto_power : bool
For power beams, check whether the auto polarization beams have non-zero
imaginary values in the data_array (which should not mathematically exist).
fix_auto_power : bool
For power beams, if auto polarization beams with imaginary values are found,
fix those values so that they are real-only in data_array.
Returns
-------
None
Raises
------
ValueError
If the amplitudes or delays are the wrong shape or there are delays
greater than 32 or delays are not integer types.
If the frequency range doesn't include any
available frequencies.
"""
# update filename attribute
basename = os.path.basename(h5filepath)
self.filename = [basename]
self._filename.form = (1,)
freqs_hz, pol_names, dipole_names, max_length = self._read_metadata(h5filepath)
n_dp = dipole_names.size
n_pol = len(pol_names)
if delays is None:
delays = np.zeros([n_pol, n_dp], dtype="int")
else:
if not np.issubdtype(delays.dtype, np.integer):
raise ValueError("Delays must be integers.")
if amplitudes is None:
amplitudes = np.ones([n_pol, n_dp])
if amplitudes.shape != (n_pol, n_dp):
raise ValueError(
"amplitudes must be shape ({npol}, {nd})".format(npol=n_pol, nd=n_dp)
)
if delays.shape != (n_pol, n_dp):
raise ValueError(
"delays must be shape ({npol}, {nd})".format(npol=n_pol, nd=n_dp)
)
if (delays > 32).any():
raise ValueError(
"There are delays greater than 32: {delays}".format(delays=delays)
)
# check for terminated dipoles and reset delays and amplitudes
terminated = delays == 32
if (terminated).any():
warnings.warn(
"There are some terminated dipoles "
"(delay setting 32). Setting the amplitudes and "
"delays of terminated dipoles to zero."
)
delays[terminated] = 0
amplitudes[terminated] = 0
if freq_range is not None:
if np.array(freq_range).size != 2:
raise ValueError("freq_range must have 2 elements.")
freqs_use = freqs_hz[
np.nonzero((freqs_hz >= freq_range[0]) & (freqs_hz <= freq_range[1]))
]
if freqs_use.size < 1:
raise ValueError(
"No frequencies available in freq_range. "
"Available frequencies are between {fmin} Hz "
"and {fmax} Hz".format(fmin=np.min(freqs_hz), fmax=np.max(freqs_hz))
)
if freqs_use.size < 2:
warnings.warn("Only one available frequency in freq_range.")
else:
freqs_use = freqs_hz
beam_modes = self._get_beam_modes(
h5filepath,
freqs_hz,
pol_names,
dipole_names,
max_length,
delays,
amplitudes,
)
n_phi = np.floor(360 * pixels_per_deg)
n_theta = np.floor(90 * pixels_per_deg) + 1
theta_arr = np.deg2rad(np.arange(0, n_theta) / pixels_per_deg)
phi_arr = np.deg2rad(np.arange(0, n_phi) / pixels_per_deg)
jones = self._get_response(freqs_use, pol_names, beam_modes, phi_arr, theta_arr)
# work out zenith normalization
# (MWA beams are peak normalized to 1 when pointed at zenith)
# start filling in the object
self.telescope_name = "MWA"
self.feed_name = "MWA"
self.feed_version = "1.0"
self.model_name = "full embedded element"
self.model_version = "1.0"
self.history = (
"Sujito et al. full embedded element beam, derived from "
"https://github.com/MWATelescope/mwa_pb/"
)
delay_str_list = []
gain_str_list = []
for pol in range(n_pol):
delay_str_list.append(
"[" + ", ".join([str(x) for x in delays[pol, :]]) + "]"
)
gain_str_list.append(
"[" + ", ".join([str(x) for x in amplitudes[pol, :]]) + "]"
)
delay_str = "[" + ", ".join(delay_str_list) + "]"
gain_str = "[" + ", ".join(gain_str_list) + "]"
self.history += " delays set to " + delay_str + " gains set to " + gain_str
if not uvutils._check_history_version(self.history, self.pyuvdata_version_str):
self.history += self.pyuvdata_version_str
self.x_orientation = "east"
self._set_efield()
self.Naxes_vec = 2
self.Ncomponents_vec = 2
self.feed_array = np.array([str(pol.lower()) for pol in pol_names])
self.Nfeeds = self.feed_array.size
self.data_normalization = "physical"
# for now this returns a simple beam because it requires amps & delays
# to make the beam
self.antenna_type = "simple"
self.Nfreqs = freqs_use.size
self.freq_array = freqs_use.astype(np.float64)
self.freq_array = self.freq_array[np.newaxis, :]
self.bandpass_array = np.ones((1, self.Nfreqs))
if not use_future_array_shapes:
self.Nspws = 1
self.spw_array = np.array([0])
self.pixel_coordinate_system = "az_za"
self._set_cs_params()
self.axis1_array = phi_arr
self.Naxes1 = self.axis1_array.size
self.axis2_array = theta_arr
self.Naxes2 = self.axis2_array.size
# The array that come from `_get_response` has shape shape
# (Npol, 2, Nfreq, Nphi, Ntheta)
# UVBeam wants shape
# ('Naxes_vec', 1, 'Nfeeds', 'Nfreqs', 'Naxes2', 'Naxes1')
# where the Naxes_vec dimension lines up with the 2 from `_get_response`,
# Nfeeds is UVBeam's Npol for E-field beams,
# and axes (2, 1) correspond to (theta, phi)
# Then add an empty dimension for Nspws.
self.data_array = np.transpose(jones, axes=[1, 0, 2, 4, 3])
self.data_array = self.data_array[:, np.newaxis, :, :, :, :]
self.basis_vector_array = np.zeros(
(self.Naxes_vec, self.Ncomponents_vec, self.Naxes2, self.Naxes1)
)
self.basis_vector_array[0, 0, :, :] = 1.0
self.basis_vector_array[1, 1, :, :] = 1.0
if use_future_array_shapes:
self.use_future_array_shapes()
if run_check:
self.check(
check_extra=check_extra,
run_check_acceptability=run_check_acceptability,
check_auto_power=check_auto_power,
fix_auto_power=fix_auto_power,
)
![swh spinner](/static/img/swh-spinner.gif)
Computing file changes ...