Revision d5dedf99e4ca9860ce8a1dd42db1cb666c360632 authored by Andrew Morton on 05 March 2007, 08:30:04 UTC, committed by Linus Torvalds on 05 March 2007, 15:57:50 UTC
In http://bugzilla.kernel.org/show_bug.cgi?id=8065, Shen points out that the cyclades driver forget to return closing_wait to userspace. Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Shen <shanlu@cs.uiuc.edu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
1 parent 20b0f65
iosapic.h
#ifndef __ASM_IA64_IOSAPIC_H
#define __ASM_IA64_IOSAPIC_H
#define IOSAPIC_REG_SELECT 0x0
#define IOSAPIC_WINDOW 0x10
#define IOSAPIC_EOI 0x40
#define IOSAPIC_VERSION 0x1
/*
* Redirection table entry
*/
#define IOSAPIC_RTE_LOW(i) (0x10+i*2)
#define IOSAPIC_RTE_HIGH(i) (0x11+i*2)
#define IOSAPIC_DEST_SHIFT 16
/*
* Delivery mode
*/
#define IOSAPIC_DELIVERY_SHIFT 8
#define IOSAPIC_FIXED 0x0
#define IOSAPIC_LOWEST_PRIORITY 0x1
#define IOSAPIC_PMI 0x2
#define IOSAPIC_NMI 0x4
#define IOSAPIC_INIT 0x5
#define IOSAPIC_EXTINT 0x7
/*
* Interrupt polarity
*/
#define IOSAPIC_POLARITY_SHIFT 13
#define IOSAPIC_POL_HIGH 0
#define IOSAPIC_POL_LOW 1
/*
* Trigger mode
*/
#define IOSAPIC_TRIGGER_SHIFT 15
#define IOSAPIC_EDGE 0
#define IOSAPIC_LEVEL 1
/*
* Mask bit
*/
#define IOSAPIC_MASK_SHIFT 16
#define IOSAPIC_MASK (1<<IOSAPIC_MASK_SHIFT)
#ifndef __ASSEMBLY__
#ifdef CONFIG_IOSAPIC
#define NR_IOSAPICS 256
static inline unsigned int iosapic_read(char __iomem *iosapic, unsigned int reg)
{
writel(reg, iosapic + IOSAPIC_REG_SELECT);
return readl(iosapic + IOSAPIC_WINDOW);
}
static inline void iosapic_write(char __iomem *iosapic, unsigned int reg, u32 val)
{
writel(reg, iosapic + IOSAPIC_REG_SELECT);
writel(val, iosapic + IOSAPIC_WINDOW);
}
static inline void iosapic_eoi(char __iomem *iosapic, u32 vector)
{
writel(vector, iosapic + IOSAPIC_EOI);
}
extern void __init iosapic_system_init (int pcat_compat);
extern int __devinit iosapic_init (unsigned long address,
unsigned int gsi_base);
#ifdef CONFIG_HOTPLUG
extern int iosapic_remove (unsigned int gsi_base);
#else
#define iosapic_remove(gsi_base) (-EINVAL)
#endif /* CONFIG_HOTPLUG */
extern int gsi_to_vector (unsigned int gsi);
extern int gsi_to_irq (unsigned int gsi);
extern int iosapic_register_intr (unsigned int gsi, unsigned long polarity,
unsigned long trigger);
extern void iosapic_unregister_intr (unsigned int irq);
extern void __init iosapic_override_isa_irq (unsigned int isa_irq, unsigned int gsi,
unsigned long polarity,
unsigned long trigger);
extern int __init iosapic_register_platform_intr (u32 int_type,
unsigned int gsi,
int pmi_vector,
u16 eid, u16 id,
unsigned long polarity,
unsigned long trigger);
extern unsigned int iosapic_version (char __iomem *addr);
#ifdef CONFIG_NUMA
extern void __devinit map_iosapic_to_node (unsigned int, int);
#endif
#else
#define iosapic_system_init(pcat_compat) do { } while (0)
#define iosapic_init(address,gsi_base) (-EINVAL)
#define iosapic_remove(gsi_base) (-ENODEV)
#define iosapic_register_intr(gsi,polarity,trigger) (gsi)
#define iosapic_unregister_intr(irq) do { } while (0)
#define iosapic_override_isa_irq(isa_irq,gsi,polarity,trigger) do { } while (0)
#define iosapic_register_platform_intr(type,gsi,pmi,eid,id, \
polarity,trigger) (gsi)
#endif
# endif /* !__ASSEMBLY__ */
#endif /* __ASM_IA64_IOSAPIC_H */
![swh spinner](/static/img/swh-spinner.gif)
Computing file changes ...