Revision d6ee1e7e9004d3d246cdfa14196989e0a9466c16 authored by Jerome Brunet on 08 November 2018, 09:31:23 UTC, committed by Stephen Boyd on 08 November 2018, 18:21:21 UTC
Similar to gxbb and gxl platforms, axg SCPI Cortex-M co-processor
uses the fdiv2 and fdiv3 to, among other things, provide the cpu
clock.
Until clock hand-off mechanism makes its way to CCF and the generic
SCPI claims platform specific clocks, these clocks must be marked as
critical to make sure they are never disabled when needed by the
co-processor.
Fixes: 05f814402d61 ("clk: meson: add fdiv clock gates")
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
1 parent e2576c8
defpalo.conf
# This a generic Palo configuration file. For more information about how
# it works try 'palo -?'.
#
# Most people using 'make palo' want a bootable file, usable for
# network or tape booting for example.
--init-tape=lifimage
--recoverykernel=vmlinuz
########## Pick your ROOT here! ##########
# You need at least one 'root='!
#
# If you want a root ramdisk, use the next 2 lines
# (Edit the ramdisk image name!!!!)
--ramdisk=ram-disk-image-file
--commandline=0/vmlinuz HOME=/ root=/dev/ram initrd=0/ramdisk panic_timeout=60 panic=-1
# If you want NFS root, use the following command line (Edit the HOSTNAME!!!)
#--commandline=0/vmlinuz HOME=/ root=/dev/nfs nfsroot=HOSTNAME ip=bootp
# If you have root on a disk partition, use this (Edit the partition name!!!)
#--commandline=0/vmlinuz HOME=/ root=/dev/sda1
Computing file changes ...
