| d972477 | Or Gerlitz | 22 December 2016, 12:28:15 UTC | net/sched: cls_flower: Mandate mask when matching on flags When matching on flags, we should require the user to provide the mask and avoid using an all-ones mask. Not doing so causes matching on flags provided w.o mask to hit on the value being unset for all flags, which may not what the user wanted to happen. Fixes: faa3ffce7829 ('net/sched: cls_flower: Add support for matching on flags') Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Reported-by: Paul Blakey <paulb@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 23 December 2016, 16:59:56 UTC |
| dc594ec | Or Gerlitz | 22 December 2016, 12:28:14 UTC | net/sched: act_tunnel_key: Fix setting UDP dst port in metadata under IPv6 The UDP dst port was provided to the helper function which sets the IPv6 IP tunnel meta-data under a wrong param order, fix that. Fixes: 75bfbca01e48 ('net/sched: act_tunnel_key: Add UDP dst port option') Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Reviewed-by: Hadar Hen Zion <hadarh@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 23 December 2016, 16:59:56 UTC |
| 567be78 | jpinto | 23 December 2016, 10:15:59 UTC | stmmac: CSR clock configuration fix When testing stmmac with my QoS reference design I checked a problem in the CSR clock configuration that was impossibilitating the phy discovery, since every read operation returned 0x0000ffff. This patch fixes the issue. Signed-off-by: Joao Pinto <jpinto@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 23 December 2016, 16:46:37 UTC |
| 2e3d5fa | David S. Miller | 22 December 2016, 16:15:53 UTC | Merge tag 'wireless-drivers-for-davem-2016-12-22' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers Kalle Valo says: ==================== wireless-drivers fixes for 4.10 All small fixes this time, especially important are the regression fixes for rtlwifi and ath9k. ==================== Signed-off-by: David S. Miller <davem@davemloft.net> | 22 December 2016, 16:15:53 UTC |
| 7d99569 | Lorenzo Colitti | 22 December 2016, 15:33:57 UTC | net: ipv4: Don't crash if passing a null sk to ip_do_redirect. Commit e2d118a1cb5e ("net: inet: Support UID-based routing in IP protocols.") made ip_do_redirect call sock_net(sk) to determine the network namespace of the passed-in socket. This crashes if sk is NULL. Fix this by getting the network namespace from the skb instead. Fixes: e2d118a1cb5e ("net: inet: Support UID-based routing in IP protocols.") Signed-off-by: Lorenzo Colitti <lorenzo@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 22 December 2016, 16:15:10 UTC |
| 551cde1 | Colin Ian King | 21 December 2016, 16:03:23 UTC | net: fddi: skfp: use %p format specifier for addresses rather than %x Trivial fix: Addresses should be printed using the %p format specifier rather than using %x. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 21 December 2016, 20:34:51 UTC |
| 0a9648f | Eric Dumazet | 21 December 2016, 13:42:43 UTC | tcp: add a missing barrier in tcp_tasklet_func() Madalin reported crashes happening in tcp_tasklet_func() on powerpc64 Before TSQ_QUEUED bit is cleared, we must ensure the changes done by list_del(&tp->tsq_node); are committed to memory, otherwise corruption might happen, as an other cpu could catch TSQ_QUEUED clearance too soon. We can notice that old kernels were immune to this bug, because TSQ_QUEUED was cleared after a bh_lock_sock(sk)/bh_unlock_sock(sk) section, but they could have missed a kick to write additional bytes, when NIC interrupts for a given flow are spread to multiple cpus. Affected TCP flows would need an incoming ACK or RTO timer to add more packets to the pipe. So overall situation should be better now. Fixes: b223feb9de2a ("tcp: tsq: add shortcut in tcp_tasklet_func()") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Madalin Bucur <madalin.bucur@nxp.com> Tested-by: Madalin Bucur <madalin.bucur@nxp.com> Tested-by: Xing Lei <xing.lei@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 21 December 2016, 20:30:27 UTC |
| 8354491 | Thomas Petazzoni | 21 December 2016, 10:28:49 UTC | net: mvpp2: fix dma unmapping of TX buffers for fragments Since commit 71ce391dfb784 ("net: mvpp2: enable proper per-CPU TX buffers unmapping"), we are not correctly DMA unmapping TX buffers for fragments. Indeed, the mvpp2_txq_inc_put() function only stores in the txq_cpu->tx_buffs[] array the physical address of the buffer to be DMA-unmapped when skb != NULL. In addition, when DMA-unmapping, we use skb_headlen(skb) to get the size to be unmapped. Both of this works fine for TX descriptors that are associated directly to a SKB, but not the ones that are used for fragments, with a NULL pointer as skb: - We have a NULL physical address when calling DMA unmap - skb_headlen(skb) crashes because skb is NULL This causes random crashes when fragments are used. To solve this problem, we need to: - Store the physical address of the buffer to be unmapped unconditionally, regardless of whether it is tied to a SKB or not. - Store the length of the buffer to be unmapped, which requires a new field. Instead of adding a third array to store the length of the buffer to be unmapped, and as suggested by David Miller, this commit refactors the tx_buffs[] and tx_skb[] arrays of 'struct mvpp2_txq_pcpu' into a separate structure 'mvpp2_txq_pcpu_buf', to which a 'size' field is added. Therefore, instead of having three arrays to allocate/free, we have a single one, which also improve data locality, reducing the impact on the CPU cache. Fixes: 71ce391dfb784 ("net: mvpp2: enable proper per-CPU TX buffers unmapping") Reported-by: Raphael G <raphael.glon@corp.ovh.com> Cc: Raphael G <raphael.glon@corp.ovh.com> Cc: stable@vger.kernel.org Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 21 December 2016, 18:38:21 UTC |
| f217bfd | Heiko Stübner | 20 December 2016, 16:17:06 UTC | net: ethernet: stmmac: dwmac-rk: make clk enablement first in powerup Right now the dwmac-rk tries to set up the GRF-specific speed and link options before enabling clocks, phys etc and on previous socs this works because the GRF is supplied on the whole by one clock. On the rk3399 however the GRF (General Register Files) clock-supply has been split into multiple clocks and while there is no specific grf-gmac clock like for other sub-blocks, it seems the mac-specific portions are actually supplied by the general mac clock. This results in hangs on rk3399 boards if the driver is build as module. When built in te problem of course doesn't surface, as the clocks are of course still on at the stage before clock_disable_unused. To solve this, simply move the clock enablement to the first position in the powerup callback. This is also a good idea in general to enable clocks before everything else. Tested on rk3288, rk3368 and rk3399 the dwmac still works on all of them. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: David S. Miller <davem@davemloft.net> | 21 December 2016, 18:25:39 UTC |
| 76b1592 | Kalesh A P | 20 December 2016, 15:14:30 UTC | be2net: Increase skb headroom size to 256 bytes The driver currently allocates 128 bytes of skb headroom. This was found to be insufficient with some configurations like Geneve tunnels, which resulted in skb head reallocations. Increase the headroom to 256 bytes to fix this. Signed-off-by: Kalesh A P <kalesh-anakkur.purayil@broadcom.com> Signed-off-by: Suresh Reddy <suresh.reddy@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 21 December 2016, 18:23:05 UTC |
| 22b68b9 | Larry Finger | 20 December 2016, 02:38:12 UTC | rtlwifi: Fix kernel oops introduced with commit e49656147359 With commit e49656147359 {"rtlwifi: Use dev_kfree_skb_irq instead of kfree_skb"), the method used to free an skb was changed because the kfree_skb() was inside a spinlock. What was forgotten is that kfree_skb() guards against a NULL value for the argument. Routine dev_kfree_skb_irq() does not, and a test is needed to prevent kernel panics. Fixes: e49656147359 ("rtlwifi: Use dev_kfree_skb_irq instead of kfree_skb") Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Stable <stable@vger.kernel.org> # 4.9+ Cc: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> | 21 December 2016, 14:34:16 UTC |
| d1f1c0e | Tobias Klausmann | 13 December 2016, 17:08:07 UTC | ath9k: do not return early to fix rcu unlocking Starting with commit d94a461d7a7d ("ath9k: use ieee80211_tx_status_noskb where possible") the driver uses rcu_read_lock() && rcu_read_unlock(), yet on returning early in ath_tx_edma_tasklet() the unlock is missing leading to stalls and suspicious RCU usage: =============================== [ INFO: suspicious RCU usage. ] 4.9.0-rc8 #11 Not tainted ------------------------------- kernel/rcu/tree.c:705 Illegal idle entry in RCU read-side critical section.! other info that might help us debug this: RCU used illegally from idle CPU! rcu_scheduler_active = 1, debug_locks = 0 RCU used illegally from extended quiescent state! 1 lock held by swapper/7/0: #0: ( rcu_read_lock ){......} , at: [<ffffffffa06ed110>] ath_tx_edma_tasklet+0x0/0x450 [ath9k] stack backtrace: CPU: 7 PID: 0 Comm: swapper/7 Not tainted 4.9.0-rc8 #11 Hardware name: Acer Aspire V3-571G/VA50_HC_CR, BIOS V2.21 12/16/2013 ffff88025efc3f38 ffffffff8132b1e5 ffff88017ede4540 0000000000000001 ffff88025efc3f68 ffffffff810a25f7 ffff88025efcee60 ffff88017edebdd8 ffff88025eeb5400 0000000000000091 ffff88025efc3f88 ffffffff810c3cd4 Call Trace: <IRQ> [<ffffffff8132b1e5>] dump_stack+0x68/0x93 [<ffffffff810a25f7>] lockdep_rcu_suspicious+0xd7/0x110 [<ffffffff810c3cd4>] rcu_eqs_enter_common.constprop.85+0x154/0x200 [<ffffffff810c5a54>] rcu_irq_exit+0x44/0xa0 [<ffffffff81058631>] irq_exit+0x61/0xd0 [<ffffffff81018d25>] do_IRQ+0x65/0x110 [<ffffffff81672189>] common_interrupt+0x89/0x89 <EOI> [<ffffffff814ffe11>] ? cpuidle_enter_state+0x151/0x200 [<ffffffff814ffee2>] cpuidle_enter+0x12/0x20 [<ffffffff8109a6ae>] call_cpuidle+0x1e/0x40 [<ffffffff8109a8f6>] cpu_startup_entry+0x146/0x220 [<ffffffff810336f8>] start_secondary+0x148/0x170 Signed-off-by: Tobias Klausmann <tobias.johannes.klausmann@mni.thm.de> Fixes: d94a461d7a7d ("ath9k: use ieee80211_tx_status_noskb where possible") Cc: <stable@vger.kernel.org> # v4.9 Acked-by: Felix Fietkau <nbd@nbd.name> Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Tested-by: Gabriel Craciunescu <nix.or.die@gmail.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com> | 21 December 2016, 14:28:32 UTC |
| ba6d973 | Linus Torvalds | 20 December 2016, 23:48:34 UTC | Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net Pull networking fixes and cleanups from David Miller: 1) Use rb_entry() instead of hardcoded container_of(), from Geliang Tang. 2) Use correct memory barriers in stammac driver, from Pavel Machek. 3) Fix assoc bind address handling in SCTP, from Xin Long. 4) Make the length check for UFO handling consistent between __ip_append_data() and ip_finish_output(), from Zheng Li. 5) HSI driver compatible strings were busted fro hix5hd2, from Dongpo Li. 6) Handle devm_ioremap() errors properly in cavium driver, from Arvind Yadav. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (22 commits) RDS: use rb_entry() net_sched: sch_netem: use rb_entry() net_sched: sch_fq: use rb_entry() net/mlx5: use rb_entry() ethernet: sfc: Add Kconfig entry for vendor Solarflare sctp: not copying duplicate addrs to the assoc's bind address list sctp: reduce indent level in sctp_copy_local_addr_list ARM: dts: hix5hd2: don't change the existing compatible string net: hix5hd2_gmac: fix compatible strings name openvswitch: Add a missing break statement. net: netcp: ethss: fix 10gbe host port tx pri map configuration net: netcp: ethss: fix errors in ethtool ops fsl/fman: enable compilation on ARM64 fsl/fman: A007273 only applies to PPC SoCs powerpc: fsl/fman: remove fsl,fman from of_device_ids[] fsl/fman: fix 1G support for QSGMII interfaces dt: bindings: net: use boolean dt properties for eee broken modes net: phy: use boolean dt properties for eee broken modes net: phy: fix sign type error in genphy_config_eee_advert ipv4: Should use consistent conditional judgement for ip fragment in __ip_append_data and ip_finish_output ... | 20 December 2016, 23:48:34 UTC |
| 3eb8625 | Linus Torvalds | 20 December 2016, 23:24:32 UTC | Merge branch 'akpm' (patches from Andrew) Merge final set of updates from Andrew Morton: - a series to make IMA play better across kexec - a handful of random fixes * emailed patches from Andrew Morton <akpm@linux-foundation.org>: printk: fix typo in CONSOLE_LOGLEVEL_DEFAULT help text ratelimit: fix WARN_ON_RATELIMIT return value kcov: make kcov work properly with KASLR enabled arm64: setup: introduce kaslr_offset() mm: fadvise: avoid expensive remote LRU cache draining after FADV_DONTNEED ima: platform-independent hash value ima: define a canonical binary_runtime_measurements list format ima: support restoring multiple template formats ima: store the builtin/custom template definitions in a list ima: on soft reboot, save the measurement list powerpc: ima: send the kexec buffer to the next kernel ima: maintain memory size needed for serializing the measurement list ima: permit duplicate measurement list entries ima: on soft reboot, restore the measurement list powerpc: ima: get the kexec buffer passed by the previous kernel | 20 December 2016, 23:24:32 UTC |
| f95adbc | Linus Torvalds | 20 December 2016, 23:22:01 UTC | Merge branch 'mailbox-for-next' of git://git.linaro.org/landing-teams/working/fujitsu/integration Pull mailbox updates from Jassi Brar: - new features (poll and SRAM usage) added to the mailbox-test driver - major update of Broadcom's PDC controller driver - minor fix for auto-loading test and STI driver modules * 'mailbox-for-next' of git://git.linaro.org/landing-teams/working/fujitsu/integration: mailbox: mailbox-test: allow reserved areas in SRAM mailbox: mailbox-test: add support for fasync/poll mailbox: bcm-pdc: Remove unnecessary void* casts mailbox: bcm-pdc: Simplify interrupt handler logic mailbox: bcm-pdc: Performance improvements mailbox: bcm-pdc: Don't use iowrite32 to write DMA descriptors mailbox: bcm-pdc: Convert from threaded IRQ to tasklet mailbox: bcm-pdc: Try to improve branch prediction mailbox: bcm-pdc: streamline rx code mailbox: bcm-pdc: Convert from interrupts to poll for tx done mailbox: bcm-pdc: PDC driver leaves debugfs files after removal mailbox: bcm-pdc: Changes so mbox client can be removed / re-inserted mailbox: bcm-pdc: Use octal permissions rather than symbolic mailbox: sti: Fix module autoload for OF registration mailbox: mailbox-test: Fix module autoload | 20 December 2016, 23:22:01 UTC |
| 74f65bb | Linus Torvalds | 20 December 2016, 23:19:55 UTC | Merge branch 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c fixes from Wolfram Sang. * 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: mux: mlxcpld: fix i2c mux selection caching i2c: designware: fix wrong Tx/Rx FIFO for ACPI i2c: xgene: Fix missing code of DTB support i2c: mux: pca954x: fix i2c mux selection caching i2c: octeon: thunderx: Limit register access retries | 20 December 2016, 23:19:55 UTC |
| 1351522 | Linus Torvalds | 20 December 2016, 23:17:55 UTC | Merge tag 'doc-4.10-3' of git://git.lwn.net/linux Pull documentation fix from Jonathan Corbet: "A single fix for the build system. It would appear that the docutils developers, in their wisdom, broke the API in the 0.13 release. This fix detects the breakage and allows the docs to be built with both the old and new versions" * tag 'doc-4.10-3' of git://git.lwn.net/linux: docs: sphinx-extensions: make rstFlatTable work with docutils 0.13 | 20 December 2016, 23:17:55 UTC |
| d5379e5 | Linus Torvalds | 20 December 2016, 23:16:00 UTC | Merge tag 'microblaze-4.10-rc1' of git://git.monstr.eu/linux-2.6-microblaze Pull arch/microblaze updates from Michal Simek: - wire-up new syscalls - add new codes and fpga families - fix a return value * tag 'microblaze-4.10-rc1' of git://git.monstr.eu/linux-2.6-microblaze: microblaze: Add new fpga families microblaze: Add missing release version code v9.6 and v10 microblaze: Add missing syscalls microblaze: Fix return value from xilinx_timer_init | 20 December 2016, 23:16:00 UTC |
| ec92b88 | Linus Torvalds | 20 December 2016, 22:48:53 UTC | Merge tag 'xtensa-20161219' of git://github.com/jcmvbkbc/linux-xtensa Pull Xtensa updates from Max Filippov: - enable HAVE_DMA_CONTIGUOUS, configure shared DMA pool reservation in kc705 DTS - update xtensa DMA-related Documentation/features entries - clean up arch/xtensa/kernel/setup.c: move S32C1I self-test out of it, remove unused declarations, fix screen_info definition * tag 'xtensa-20161219' of git://github.com/jcmvbkbc/linux-xtensa: xtensa: update DMA-related Documentation/features entries xtensa: configure shared DMA pool reservation in kc705 DTS xtensa: enable HAVE_DMA_CONTIGUOUS xtensa: move S32C1I self-test to a separate file xtensa: fix screen_info, clean up unused declarations in setup.c | 20 December 2016, 22:48:53 UTC |
| a763f78 | Geliang Tang | 20 December 2016, 14:02:18 UTC | RDS: use rb_entry() To make the code clearer, use rb_entry() instead of container_of() to deal with rbtree. Signed-off-by: Geliang Tang <geliangtang@gmail.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 20 December 2016, 19:22:49 UTC |
| 7f7cd56 | Geliang Tang | 20 December 2016, 14:02:16 UTC | net_sched: sch_netem: use rb_entry() To make the code clearer, use rb_entry() instead of container_of() to deal with rbtree. Signed-off-by: Geliang Tang <geliangtang@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 20 December 2016, 19:22:48 UTC |
| e124557 | Geliang Tang | 20 December 2016, 14:02:15 UTC | net_sched: sch_fq: use rb_entry() To make the code clearer, use rb_entry() instead of container_of() to deal with rbtree. Signed-off-by: Geliang Tang <geliangtang@gmail.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 20 December 2016, 19:22:48 UTC |
| f7fb138 | Geliang Tang | 20 December 2016, 14:02:14 UTC | net/mlx5: use rb_entry() To make the code clearer, use rb_entry() instead of container_of() to deal with rbtree. Signed-off-by: Geliang Tang <geliangtang@gmail.com> Acked-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 20 December 2016, 19:22:48 UTC |
| ae99b63 | Tobias Klauser | 20 December 2016, 13:38:26 UTC | ethernet: sfc: Add Kconfig entry for vendor Solarflare Since commit 5a6681e22c14 ("sfc: separate out SFC4000 ("Falcon") support into new sfc-falcon driver") there are two drivers for Solarflare devices, but both still show up directly beneath "Ethernet driver support" in the Kconfig. Follow the pattern of other vendors and group them beneath an own vendor Kconfig entry for Solarflare. Cc: Edward Cree <ecree@solarflare.com> Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Acked-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 20 December 2016, 19:19:38 UTC |
| b794e25 | David S. Miller | 20 December 2016, 19:15:45 UTC | Merge branch 'sctp-fixes' Xin Long says: ==================== sctp: fix the issue that may copy duplicate addrs into assoc's bind address list Patch 1/2 is to fix some indent level. Given that we have kernels out there with this issue, patch 2/2 also fix sctp_raw_to_bind_addrs. v1 -> v2: Explain why we didn't filter the duplicate addresses when global address list gets updated in patch 2/2 changelog. ==================== Signed-off-by: David S. Miller <davem@davemloft.net> | 20 December 2016, 19:15:45 UTC |
| b860780 | Xin Long | 20 December 2016, 05:49:50 UTC | sctp: not copying duplicate addrs to the assoc's bind address list sctp.local_addr_list is a global address list that is supposed to include all the local addresses. sctp updates this list according to NETDEV_UP/ NETDEV_DOWN notifications. However, if multiple NICs have the same address, the global list would have duplicate addresses. Even if for one NIC, promote secondaries in __inet_del_ifa can also lead to accumulating duplicate addresses. When sctp binds address 'ANY' and creates a connection, it copies all the addresses from global list into asoc's bind addr list, which makes sctp pack the duplicate addresses into INIT/INIT_ACK packets. This patch is to filter the duplicate addresses when copying the addrs from global list in sctp_copy_local_addr_list and unpacking addr_param from cookie in sctp_raw_to_bind_addrs to asoc's bind addr list. Note that we can't filter the duplicate addrs when global address list gets updated, As NETDEV_DOWN event may remove an addr that still exists in another NIC. Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 20 December 2016, 19:15:45 UTC |
| 165f2cf | Xin Long | 20 December 2016, 05:49:49 UTC | sctp: reduce indent level in sctp_copy_local_addr_list This patch is to reduce indent level by using continue when the addr is not allowed, and also drop end_copy by using break. Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 20 December 2016, 19:15:44 UTC |
| 92f9532 | David S. Miller | 20 December 2016, 19:12:30 UTC | Merge branch 'hix5hd2_gmac-compatible-string' Dongpo Li says: ==================== net: hix5hd2_gmac: keep the compatible string not changed This patch series fix the patch: d0fb6ba75dc0 ("net: hix5hd2_gmac: add generic compatible string") The SoC hix5hd2 compatible string has the suffix "-gmac" and we should not change its compatible string. So we should name all the compatible string with the suffix "-gmac". Creating a new name suffix "-gemac" is unnecessary. ==================== Signed-off-by: David S. Miller <davem@davemloft.net> | 20 December 2016, 19:12:30 UTC |
| 48fed73 | Dongpo Li | 20 December 2016, 02:09:29 UTC | ARM: dts: hix5hd2: don't change the existing compatible string The SoC hix5hd2 compatible string has the suffix "-gmac" and we should not change it. We should only add the generic compatible string "hisi-gmac-v1". Fixes: 0855950ba580 ("ARM: dts: hix5hd2: add gmac generic compatible and clock names") Signed-off-by: Dongpo Li <lidongpo@hisilicon.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 20 December 2016, 19:12:29 UTC |
| f7ca8e3 | Dongpo Li | 20 December 2016, 02:09:28 UTC | net: hix5hd2_gmac: fix compatible strings name The SoC hix5hd2 compatible string has the suffix "-gmac" and we should not change its compatible string. So we should name all the compatible string with the suffix "-gmac". Creating a new name suffix "-gemac" is unnecessary. We also add another SoC compatible string in dt binding documentation and describe which generic version the SoC belongs to. Fixes: d0fb6ba75dc0 ("net: hix5hd2_gmac: add generic compatible string") Signed-off-by: Dongpo Li <lidongpo@hisilicon.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 20 December 2016, 19:12:29 UTC |
| 87e159c | Jarno Rajahalme | 20 December 2016, 01:06:33 UTC | openvswitch: Add a missing break statement. Add a break statement to prevent fall-through from OVS_KEY_ATTR_ETHERNET to OVS_KEY_ATTR_TUNNEL. Without the break actions setting ethernet addresses fail to validate with log messages complaining about invalid tunnel attributes. Fixes: 0a6410fbde ("openvswitch: netlink: support L3 packets") Signed-off-by: Jarno Rajahalme <jarno@ovn.org> Acked-by: Pravin B Shelar <pshelar@ovn.org> Acked-by: Jiri Benc <jbenc@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 20 December 2016, 19:07:41 UTC |
| 4c0ef23 | WingMan Kwok | 19 December 2016, 22:55:57 UTC | net: netcp: ethss: fix 10gbe host port tx pri map configuration This patch adds the missing 10gbe host port tx priority map configurations. Signed-off-by: WingMan Kwok <w-kwok2@ti.com> Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 20 December 2016, 19:07:17 UTC |
| e9838ef | WingMan Kwok | 19 December 2016, 22:55:56 UTC | net: netcp: ethss: fix errors in ethtool ops In ethtool ops, it needs to retrieve the corresponding ethss module (gbe or xgbe) from the net_device structure. Prior to this patch, the retrieving procedure only checks for the gbe module. This patch fixes the issue by checking the xgbe module if the net_device structure does not correspond to the gbe module. Signed-off-by: WingMan Kwok <w-kwok2@ti.com> Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 20 December 2016, 19:07:17 UTC |
| 04fddde | David S. Miller | 20 December 2016, 18:55:35 UTC | Merge branch 'fsl-fixes' Madalin Bucur says: ==================== fsl/fman: fixes for ARM The patch set fixes advertised speeds for QSGMII interfaces, disables A007273 erratum workaround on non-PowerPC platforms where it does not apply, enables compilation on ARM64 and addresses a probing issue on non PPC platforms. Changes from v3: removed redundant comment, added ack by Scott Changes from v2: merged fsl/fman changes to avoid a point of failure Changes from v1: unifying probing on all supported platforms ==================== Signed-off-by: David S. Miller <davem@davemloft.net> | 20 December 2016, 18:55:35 UTC |
| 2e3db5a | Madalin Bucur | 19 December 2016, 20:42:46 UTC | fsl/fman: enable compilation on ARM64 Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 20 December 2016, 18:55:35 UTC |
| 1e33099 | Madalin Bucur | 19 December 2016, 20:42:45 UTC | fsl/fman: A007273 only applies to PPC SoCs Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com> Reviewed-by: Camelia Groza <camelia.groza@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 20 December 2016, 18:55:34 UTC |
| ae6021d | Madalin Bucur | 19 December 2016, 20:42:44 UTC | powerpc: fsl/fman: remove fsl,fman from of_device_ids[] The fsl/fman drivers will use of_platform_populate() on all supported platforms. Call of_platform_populate() to probe the FMan sub-nodes. Signed-off-by: Igal Liberman <igal.liberman@freescale.com> Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com> Acked-by: Scott Wood <oss@buserror.net> Signed-off-by: David S. Miller <davem@davemloft.net> | 20 December 2016, 18:55:34 UTC |
| 606987b | Madalin Bucur | 19 December 2016, 20:42:43 UTC | fsl/fman: fix 1G support for QSGMII interfaces QSGMII ports were not advertising 1G speed. Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com> Reviewed-by: Camelia Groza <camelia.groza@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 20 December 2016, 18:55:34 UTC |
| fb3dc5b | David S. Miller | 20 December 2016, 18:50:51 UTC | Merge branch 'phy-broken-modes' Jerome Brunet says: ==================== phy: Fix integration of eee-broken-modes The purpose of this series is to fix the integration of the ethernet phy property "eee-broken-modes" [0] The v3 of this series has been merged, missing a fix (error reported by kbuild robot) available in the v4 [1] More importantly, Florian opposed adding a DT property mapping a device register this directly [2]. The concern was that the property could be abused to implement platform configuration policy. After discussing it, I think we agreed that such information about the HW (defect) should appear in the platform DT. However, the preferred way is to add a boolean property for each EEE broken mode. [0]: http://lkml.kernel.org/r/1480326409-25419-1-git-send-email-jbrunet@baylibre.com [1]: http://lkml.kernel.org/r/1480348229-25672-1-git-send-email-jbrunet@baylibre.com [2]: http://lkml.kernel.org/r/e14a3b0c-dc34-be14-48b3-518a0ad0c080@gmail.com ==================== Signed-off-by: David S. Miller <davem@davemloft.net> | 20 December 2016, 18:50:51 UTC |
| 308d316 | jbrunet | 19 December 2016, 15:05:38 UTC | dt: bindings: net: use boolean dt properties for eee broken modes The patches regarding eee-broken-modes was merged before all people involved could find an agreement on the best way to move forward. While we agreed on having a DT property to mark particular modes as broken, the value used for eee-broken-modes mapped the phy register in very direct way. Because of this, the concern is that it could be used to implement configuration policies instead of describing a broken HW. In the end, having a boolean property for each mode seems to be preferred over one bit field value mapping the register (too) directly. Cc: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 20 December 2016, 18:50:50 UTC |
| 57f3986 | jbrunet | 19 December 2016, 15:05:37 UTC | net: phy: use boolean dt properties for eee broken modes The patches regarding eee-broken-modes was merged before all people involved could find an agreement on the best way to move forward. While we agreed on having a DT property to mark particular modes as broken, the value used for eee-broken-modes mapped the phy register in very direct way. Because of this, the concern is that it could be used to implement configuration policies instead of describing a broken HW. In the end, having a boolean property for each mode seems to be preferred over one bit field value mapping the register (too) directly. Cc: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 20 December 2016, 18:50:50 UTC |
| 3bb9ab6 | jbrunet | 19 December 2016, 15:05:36 UTC | net: phy: fix sign type error in genphy_config_eee_advert In genphy_config_eee_advert, the return value of phy_read_mmd_indirect is checked to know if the register could be accessed but the result is assigned to a 'u32'. Changing to 'int' to correctly get errors from phy_read_mmd_indirect. Fixes: d853d145ea3e ("net: phy: add an option to disable EEE advertisement") Reported-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 20 December 2016, 18:50:49 UTC |
| 50f4d9b | Borislav Petkov | 20 December 2016, 00:23:15 UTC | printk: fix typo in CONSOLE_LOGLEVEL_DEFAULT help text s/prink/printk/ Link: http://lkml.kernel.org/r/20161215170111.19075-1-bp@alien8.de Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Olof Johansson <olof@lixom.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 20 December 2016, 17:48:47 UTC |
| 1b011e2 | Jiri Slaby | 20 December 2016, 00:23:12 UTC | ratelimit: fix WARN_ON_RATELIMIT return value The macro is to be used similarly as WARN_ON as: if (WARN_ON_RATELIMIT(condition, state)) do_something(); One would expect only 'condition' to affect the 'if', but WARN_ON_RATELIMIT does internally only: WARN_ON((condition) && __ratelimit(state)) So the 'if' is affected by the ratelimiting state too. Fix this by returning 'condition' in any case. Note that nobody uses WARN_ON_RATELIMIT yet, so there is nothing to worry about. But I was about to use it and was a bit surprised. Link: http://lkml.kernel.org/r/20161215093224.23126-1-jslaby@suse.cz Signed-off-by: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 20 December 2016, 17:48:47 UTC |
| 4983f0a | Alexander Popov | 20 December 2016, 00:23:09 UTC | kcov: make kcov work properly with KASLR enabled Subtract KASLR offset from the kernel addresses reported by kcov. Tested on x86_64 and AArch64 (Hikey LeMaker). Link: http://lkml.kernel.org/r/1481417456-28826-3-git-send-email-alex.popov@linux.com Signed-off-by: Alexander Popov <alex.popov@linux.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Rob Herring <robh@kernel.org> Cc: Kefeng Wang <wangkefeng.wang@huawei.com> Cc: AKASHI Takahiro <takahiro.akashi@linaro.org> Cc: Jon Masters <jcm@redhat.com> Cc: David Daney <david.daney@cavium.com> Cc: Ganapatrao Kulkarni <gkulkarni@caviumnetworks.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Nicolai Stange <nicstange@gmail.com> Cc: James Morse <james.morse@arm.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Andrey Konovalov <andreyknvl@google.com> Cc: Alexander Popov <alex.popov@linux.com> Cc: syzkaller <syzkaller@googlegroups.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 20 December 2016, 17:48:47 UTC |
| 7ede866 | Alexander Popov | 20 December 2016, 00:23:06 UTC | arm64: setup: introduce kaslr_offset() Introduce kaslr_offset() similar to x86_64 to fix kcov. [ Updated by Will Deacon ] Link: http://lkml.kernel.org/r/1481417456-28826-2-git-send-email-alex.popov@linux.com Signed-off-by: Alexander Popov <alex.popov@linux.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Rob Herring <robh@kernel.org> Cc: Kefeng Wang <wangkefeng.wang@huawei.com> Cc: AKASHI Takahiro <takahiro.akashi@linaro.org> Cc: Jon Masters <jcm@redhat.com> Cc: David Daney <david.daney@cavium.com> Cc: Ganapatrao Kulkarni <gkulkarni@caviumnetworks.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Nicolai Stange <nicstange@gmail.com> Cc: James Morse <james.morse@arm.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Andrey Konovalov <andreyknvl@google.com> Cc: Alexander Popov <alex.popov@linux.com> Cc: syzkaller <syzkaller@googlegroups.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 20 December 2016, 17:48:46 UTC |
| 4dd72b4 | Johannes Weiner | 20 December 2016, 00:23:03 UTC | mm: fadvise: avoid expensive remote LRU cache draining after FADV_DONTNEED When FADV_DONTNEED cannot drop all pages in the range, it observes that some pages might still be on per-cpu LRU caches after recent instantiation and so initiates remote calls to all CPUs to flush their local caches. However, in most cases, the fadvise happens from the same context that instantiated the pages, and any pre-LRU pages in the specified range are most likely sitting on the local CPU's LRU cache, and so in many cases this results in unnecessary remote calls, which, in a loaded system, can hold up the fadvise() call significantly. [ I didn't record it in the extreme case we observed at Facebook, unfortunately. We had a slow-to-respond system and noticed it lru_add_drain_all() leading the profile during fadvise calls. This patch came out of thinking about the code and how we commonly call FADV_DONTNEED. FWIW, I wrote a silly directory tree walker/searcher that recurses through /usr to read and FADV_DONTNEED each file it finds. On a 2 socket 40 ht machine, over 1% is spent in lru_add_drain_all(). With the patch, that cost is gone; the local drain cost shows at 0.09%. ] Try to avoid the remote call by flushing the local LRU cache before even attempting to invalidate anything. It's a cheap operation, and the local LRU cache is the most likely to hold any pre-LRU pages in the specified fadvise range. Link: http://lkml.kernel.org/r/20161214210017.GA1465@cmpxchg.org Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Mel Gorman <mgorman@suse.de> Acked-by: Hillf Danton <hillf.zj@alibaba-inc.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 20 December 2016, 17:48:46 UTC |
| 98e1d55 | Andreas Steffen | 20 December 2016, 00:23:00 UTC | ima: platform-independent hash value For remote attestion it is important for the ima measurement values to be platform-independent. Therefore integer fields to be hashed must be converted to canonical format. Link: http://lkml.kernel.org/r/1480554346-29071-11-git-send-email-zohar@linux.vnet.ibm.com Signed-off-by: Andreas Steffen <andreas.steffen@strongswan.org> Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com> Cc: Thiago Jung Bauermann <bauerman@linux.vnet.ibm.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Dmitry Kasatkin <dmitry.kasatkin@gmail.com> Cc: Josh Sklar <sklar@linux.vnet.ibm.com> Cc: Dave Young <dyoung@redhat.com> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Baoquan He <bhe@redhat.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Stewart Smith <stewart@linux.vnet.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 20 December 2016, 17:48:46 UTC |
| d68a6fe | Mimi Zohar | 20 December 2016, 00:22:57 UTC | ima: define a canonical binary_runtime_measurements list format The IMA binary_runtime_measurements list is currently in platform native format. To allow restoring a measurement list carried across kexec with a different endianness than the targeted kernel, this patch defines little-endian as the canonical format. For big endian systems wanting to save/restore the measurement list from a system with a different endianness, a new boot command line parameter named "ima_canonical_fmt" is defined. Considerations: use of the "ima_canonical_fmt" boot command line option will break existing userspace applications on big endian systems expecting the binary_runtime_measurements list to be in platform native format. Link: http://lkml.kernel.org/r/1480554346-29071-10-git-send-email-zohar@linux.vnet.ibm.com Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com> Acked-by: Dmitry Kasatkin <dmitry.kasatkin@gmail.com> Cc: Thiago Jung Bauermann <bauerman@linux.vnet.ibm.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Andreas Steffen <andreas.steffen@strongswan.org> Cc: Josh Sklar <sklar@linux.vnet.ibm.com> Cc: Dave Young <dyoung@redhat.com> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Baoquan He <bhe@redhat.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Stewart Smith <stewart@linux.vnet.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 20 December 2016, 17:48:45 UTC |
| c7d0936 | Mimi Zohar | 20 December 2016, 00:22:54 UTC | ima: support restoring multiple template formats The configured IMA measurement list template format can be replaced at runtime on the boot command line, including a custom template format. This patch adds support for restoring a measuremement list containing multiple builtin/custom template formats. Link: http://lkml.kernel.org/r/1480554346-29071-9-git-send-email-zohar@linux.vnet.ibm.com Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com> Acked-by: Dmitry Kasatkin <dmitry.kasatkin@gmail.com> Cc: Thiago Jung Bauermann <bauerman@linux.vnet.ibm.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Andreas Steffen <andreas.steffen@strongswan.org> Cc: Josh Sklar <sklar@linux.vnet.ibm.com> Cc: Dave Young <dyoung@redhat.com> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Baoquan He <bhe@redhat.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Stewart Smith <stewart@linux.vnet.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 20 December 2016, 17:48:45 UTC |
| 3f23d62 | Mimi Zohar | 20 December 2016, 00:22:51 UTC | ima: store the builtin/custom template definitions in a list The builtin and single custom templates are currently stored in an array. In preparation for being able to restore a measurement list containing multiple builtin/custom templates, this patch stores the builtin and custom templates as a linked list. This will permit defining more than one custom template per boot. Link: http://lkml.kernel.org/r/1480554346-29071-8-git-send-email-zohar@linux.vnet.ibm.com Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com> Acked-by: Dmitry Kasatkin <dmitry.kasatkin@gmail.com> Cc: Thiago Jung Bauermann <bauerman@linux.vnet.ibm.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Andreas Steffen <andreas.steffen@strongswan.org> Cc: Josh Sklar <sklar@linux.vnet.ibm.com> Cc: Dave Young <dyoung@redhat.com> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Baoquan He <bhe@redhat.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Stewart Smith <stewart@linux.vnet.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 20 December 2016, 17:48:45 UTC |
| 7b8589c | Mimi Zohar | 20 December 2016, 00:22:48 UTC | ima: on soft reboot, save the measurement list The TPM PCRs are only reset on a hard reboot. In order to validate a TPM's quote after a soft reboot (eg. kexec -e), the IMA measurement list of the running kernel must be saved and restored on boot. This patch uses the kexec buffer passing mechanism to pass the serialized IMA binary_runtime_measurements to the next kernel. Link: http://lkml.kernel.org/r/1480554346-29071-7-git-send-email-zohar@linux.vnet.ibm.com Signed-off-by: Thiago Jung Bauermann <bauerman@linux.vnet.ibm.com> Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com> Acked-by: "Eric W. Biederman" <ebiederm@xmission.com> Acked-by: Dmitry Kasatkin <dmitry.kasatkin@gmail.com> Cc: Andreas Steffen <andreas.steffen@strongswan.org> Cc: Josh Sklar <sklar@linux.vnet.ibm.com> Cc: Dave Young <dyoung@redhat.com> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Baoquan He <bhe@redhat.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Stewart Smith <stewart@linux.vnet.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 20 December 2016, 17:48:44 UTC |
| ab6b1d1 | Thiago Jung Bauermann | 20 December 2016, 00:22:45 UTC | powerpc: ima: send the kexec buffer to the next kernel The IMA kexec buffer allows the currently running kernel to pass the measurement list via a kexec segment to the kernel that will be kexec'd. This is the architecture-specific part of setting up the IMA kexec buffer for the next kernel. It will be used in the next patch. Link: http://lkml.kernel.org/r/1480554346-29071-6-git-send-email-zohar@linux.vnet.ibm.com Signed-off-by: Thiago Jung Bauermann <bauerman@linux.vnet.ibm.com> Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com> Acked-by: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Andreas Steffen <andreas.steffen@strongswan.org> Cc: Dmitry Kasatkin <dmitry.kasatkin@gmail.com> Cc: Josh Sklar <sklar@linux.vnet.ibm.com> Cc: Dave Young <dyoung@redhat.com> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Baoquan He <bhe@redhat.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Stewart Smith <stewart@linux.vnet.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 20 December 2016, 17:48:44 UTC |
| d158847 | Mimi Zohar | 20 December 2016, 00:22:42 UTC | ima: maintain memory size needed for serializing the measurement list In preparation for serializing the binary_runtime_measurements, this patch maintains the amount of memory required. Link: http://lkml.kernel.org/r/1480554346-29071-5-git-send-email-zohar@linux.vnet.ibm.com Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com> Acked-by: Dmitry Kasatkin <dmitry.kasatkin@gmail.com> Cc: Thiago Jung Bauermann <bauerman@linux.vnet.ibm.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Andreas Steffen <andreas.steffen@strongswan.org> Cc: Josh Sklar <sklar@linux.vnet.ibm.com> Cc: Dave Young <dyoung@redhat.com> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Baoquan He <bhe@redhat.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Stewart Smith <stewart@linux.vnet.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 20 December 2016, 17:48:44 UTC |
| dcfc569 | Mimi Zohar | 20 December 2016, 00:22:38 UTC | ima: permit duplicate measurement list entries Measurements carried across kexec need to be added to the IMA measurement list, but should not prevent measurements of the newly booted kernel from being added to the measurement list. This patch adds support for allowing duplicate measurements. The "boot_aggregate" measurement entry is the delimiter between soft boots. Link: http://lkml.kernel.org/r/1480554346-29071-4-git-send-email-zohar@linux.vnet.ibm.com Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com> Acked-by: Dmitry Kasatkin <dmitry.kasatkin@gmail.com> Cc: Thiago Jung Bauermann <bauerman@linux.vnet.ibm.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Andreas Steffen <andreas.steffen@strongswan.org> Cc: Josh Sklar <sklar@linux.vnet.ibm.com> Cc: Dave Young <dyoung@redhat.com> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Baoquan He <bhe@redhat.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Stewart Smith <stewart@linux.vnet.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 20 December 2016, 17:48:43 UTC |
| 94c3aac | Mimi Zohar | 20 December 2016, 00:22:35 UTC | ima: on soft reboot, restore the measurement list The TPM PCRs are only reset on a hard reboot. In order to validate a TPM's quote after a soft reboot (eg. kexec -e), the IMA measurement list of the running kernel must be saved and restored on boot. This patch restores the measurement list. Link: http://lkml.kernel.org/r/1480554346-29071-3-git-send-email-zohar@linux.vnet.ibm.com Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com> Acked-by: Dmitry Kasatkin <dmitry.kasatkin@gmail.com> Cc: Thiago Jung Bauermann <bauerman@linux.vnet.ibm.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Andreas Steffen <andreas.steffen@strongswan.org> Cc: Josh Sklar <sklar@linux.vnet.ibm.com> Cc: Dave Young <dyoung@redhat.com> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Baoquan He <bhe@redhat.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Stewart Smith <stewart@linux.vnet.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 20 December 2016, 17:48:43 UTC |
| 467d278 | Thiago Jung Bauermann | 20 December 2016, 00:22:32 UTC | powerpc: ima: get the kexec buffer passed by the previous kernel Patch series "ima: carry the measurement list across kexec", v8. The TPM PCRs are only reset on a hard reboot. In order to validate a TPM's quote after a soft reboot (eg. kexec -e), the IMA measurement list of the running kernel must be saved and then restored on the subsequent boot, possibly of a different architecture. The existing securityfs binary_runtime_measurements file conveniently provides a serialized format of the IMA measurement list. This patch set serializes the measurement list in this format and restores it. Up to now, the binary_runtime_measurements was defined as architecture native format. The assumption being that userspace could and would handle any architecture conversions. With the ability of carrying the measurement list across kexec, possibly from one architecture to a different one, the per boot architecture information is lost and with it the ability of recalculating the template digest hash. To resolve this problem, without breaking the existing ABI, this patch set introduces the boot command line option "ima_canonical_fmt", which is arbitrarily defined as little endian. The need for this boot command line option will be limited to the existing version 1 format of the binary_runtime_measurements. Subsequent formats will be defined as canonical format (eg. TPM 2.0 support for larger digests). A simplified method of Thiago Bauermann's "kexec buffer handover" patch series for carrying the IMA measurement list across kexec is included in this patch set. The simplified method requires all file measurements be taken prior to executing the kexec load, as subsequent measurements will not be carried across the kexec and restored. This patch (of 10): The IMA kexec buffer allows the currently running kernel to pass the measurement list via a kexec segment to the kernel that will be kexec'd. The second kernel can check whether the previous kernel sent the buffer and retrieve it. This is the architecture-specific part which enables IMA to receive the measurement list passed by the previous kernel. It will be used in the next patch. The change in machine_kexec_64.c is to factor out the logic of removing an FDT memory reservation so that it can be used by remove_ima_buffer. Link: http://lkml.kernel.org/r/1480554346-29071-2-git-send-email-zohar@linux.vnet.ibm.com Signed-off-by: Thiago Jung Bauermann <bauerman@linux.vnet.ibm.com> Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com> Acked-by: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Andreas Steffen <andreas.steffen@strongswan.org> Cc: Dmitry Kasatkin <dmitry.kasatkin@gmail.com> Cc: Josh Sklar <sklar@linux.vnet.ibm.com> Cc: Dave Young <dyoung@redhat.com> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Baoquan He <bhe@redhat.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Stewart Smith <stewart@linux.vnet.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 20 December 2016, 17:48:40 UTC |
| 0a28cfd | zheng li | 12 December 2016, 01:56:05 UTC | ipv4: Should use consistent conditional judgement for ip fragment in __ip_append_data and ip_finish_output There is an inconsistent conditional judgement in __ip_append_data and ip_finish_output functions, the variable length in __ip_append_data just include the length of application's payload and udp header, don't include the length of ip header, but in ip_finish_output use (skb->len > ip_skb_dst_mtu(skb)) as judgement, and skb->len include the length of ip header. That causes some particular application's udp payload whose length is between (MTU - IP Header) and MTU were fragmented by ip_fragment even though the rst->dev support UFO feature. Add the length of ip header to length in __ip_append_data to keep consistent conditional judgement as ip_finish_output for ip fragment. Signed-off-by: Zheng Li <james.z.li@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 20 December 2016, 15:45:22 UTC |
| d4166b8 | Ben Greear | 15 December 2016, 09:23:19 UTC | ath10k: free host-mem with DMA_BIRECTIONAL flag Hopefully this fixes the problem reported by Kalle: Noticed this in my log, but I don't have time to investigate this in detail right now: [ 413.795346] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 414.158755] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 477.439659] ath10k_pci 0000:02:00.0: could not get mac80211 beacon [ 481.666630] ------------[ cut here ]------------ [ 481.666669] WARNING: CPU: 0 PID: 1978 at lib/dma-debug.c:1155 check_unmap+0x320/0x8e0 [ 481.666688] ath10k_pci 0000:02:00.0: DMA-API: device driver frees DMA memory with different direction [device address=0x000000002d130000] [size=63800 bytes] [mapped with DMA_BIDIRECTIONAL] [unmapped with DMA_TO_DEVICE] [ 481.666703] Modules linked in: ctr ccm ath10k_pci(E-) ath10k_core(E) ath(E) mac80211(E) cfg80211(E) snd_hda_codec_hdmi snd_hda_codec_idt snd_hda_codec_generic snd_hda_intel snd_hda_codec snd_hda_core snd_hwdep snd_pcm snd_seq_midi arc4 snd_rawmidi snd_seq_midi_event snd_seq btusb btintel snd_seq_device joydev coret [ 481.671468] CPU: 0 PID: 1978 Comm: rmmod Tainted: G E 4.9.0-rc7-wt+ #54 [ 481.671478] Hardware name: Hewlett-Packard HP ProBook 6540b/1722, BIOS 68CDD Ver. F.04 01/27/2010 [ 481.671489] ef49dcec c842ee92 c8b5830e ef49dd34 ef49dd20 c80850f5 c8b5a13c ef49dd50 [ 481.671560] 000007ba c8b5830e 00000483 c8461830 c8461830 00000483 ef49ddcc f34e64b8 [ 481.671641] c8b58360 ef49dd3c c80851bb 00000009 00000000 ef49dd34 c8b5a13c ef49dd50 [ 481.671716] Call Trace: [ 481.671731] [<c842ee92>] dump_stack+0x76/0xb4 [ 481.671745] [<c80850f5>] __warn+0xe5/0x100 [ 481.671757] [<c8461830>] ? check_unmap+0x320/0x8e0 [ 481.671769] [<c8461830>] ? check_unmap+0x320/0x8e0 [ 481.671780] [<c80851bb>] warn_slowpath_fmt+0x3b/0x40 [ 481.671791] [<c8461830>] check_unmap+0x320/0x8e0 [ 481.671804] [<c8462054>] debug_dma_unmap_page+0x84/0xa0 [ 481.671835] [<f937cd7a>] ath10k_wmi_free_host_mem+0x9a/0xe0 [ath10k_core] [ 481.671861] [<f9363400>] ath10k_core_destroy+0x50/0x60 [ath10k_core] [ 481.671875] [<f8e13969>] ath10k_pci_remove+0x79/0xa0 [ath10k_pci] [ 481.671889] [<c848d8d8>] pci_device_remove+0x38/0xb0 [ 481.671901] [<c859fe4b>] __device_release_driver+0x7b/0x110 [ 481.671913] [<c85a00e7>] driver_detach+0x97/0xa0 [ 481.671923] [<c859ef8b>] bus_remove_driver+0x4b/0xb0 [ 481.671934] [<c85a0cda>] driver_unregister+0x2a/0x60 [ 481.671949] [<c848c888>] pci_unregister_driver+0x18/0x70 [ 481.671965] [<f8e14dae>] ath10k_pci_exit+0xd/0x25f [ath10k_pci] [ 481.671979] [<c812bb84>] SyS_delete_module+0xf4/0x180 [ 481.671995] [<c81f801b>] ? __might_fault+0x8b/0xa0 [ 481.672009] [<c80037d0>] do_fast_syscall_32+0xa0/0x1e0 [ 481.672025] [<c88d4c88>] sysenter_past_esp+0x45/0x74 [ 481.672037] ---[ end trace 3fd23759e17e1622 ]--- [ 481.672049] Mapped at: [ 481.672060] [ 481.672072] [<c846062c>] debug_dma_map_page.part.25+0x1c/0xf0 [ 481.672083] [ 481.672095] [<c8460799>] debug_dma_map_page+0x99/0xc0 [ 481.672106] [ 481.672132] [<f93745ec>] ath10k_wmi_alloc_chunk+0x12c/0x1f0 [ath10k_core] [ 481.672142] [ 481.672168] [<f937d0c4>] ath10k_wmi_event_service_ready_work+0x304/0x540 [ath10k_core] [ 481.672178] [ 481.672190] [<c80a3643>] process_one_work+0x1c3/0x670 [ 482.137134] ath10k_pci 0000:02:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0 [ 482.313144] ath10k_pci 0000:02:00.0: Direct firmware load for ath10k/pre-cal-pci-0000:02:00.0.bin failed with error -2 [ 482.313274] ath10k_pci 0000:02:00.0: Direct firmware load for ath10k/cal-pci-0000:02:00.0.bin failed with error -2 [ 482.313768] ath10k_pci 0000:02:00.0: qca988x hw2.0 target 0x4100016c chip_id 0x043202ff sub 0000:0000 [ 482.313777] ath10k_pci 0000:02:00.0: kconfig debug 1 debugfs 1 tracing 1 dfs 0 testmode 1 [ 482.313974] ath10k_pci 0000:02:00.0: firmware ver 10.2.4.70.59-2 api 5 features no-p2p,raw-mode,mfp,allows-mesh-bcast crc32 4159f498 [ 482.369858] ath10k_pci 0000:02:00.0: Direct firmware load for ath10k/QCA988X/hw2.0/board-2.bin failed with error -2 [ 482.370011] ath10k_pci 0000:02:00.0: board_file api 1 bmi_id N/A crc32 bebc7c08 [ 483.596770] ath10k_pci 0000:02:00.0: htt-ver 2.1 wmi-op 5 htt-op 2 cal otp max-sta 128 raw 0 hwcrypto 1 [ 483.701686] ath: EEPROM regdomain: 0x0 [ 483.701706] ath: EEPROM indicates default country code should be used [ 483.701713] ath: doing EEPROM country->regdmn map search [ 483.701721] ath: country maps to regdmn code: 0x3a [ 483.701730] ath: Country alpha2 being used: US [ 483.701737] ath: Regpair used: 0x3a Reported-by: Kalle Valo <kvalo@qca.qualcomm.com> Signed-off-by: Ben Greear <greearb@candelatech.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com> | 20 December 2016, 15:04:31 UTC |
| 2b66325 | Arend Van Spriel | 09 December 2016, 11:34:14 UTC | brcmfmac: fix uninitialized field in scheduled scan ssid configuration The scheduled scan ssid configuration in firmware has a flags field that was not initialized resulting in unexpected behaviour. Fixes: e3bdb7cc0300 ("brcmfmac: fix handling ssids in .sched_scan_start() callback") Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Reviewed-by: Franky Lin <franky.lin@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> | 20 December 2016, 14:09:04 UTC |
| cb853da | Arend Van Spriel | 09 December 2016, 11:34:13 UTC | brcmfmac: fix memory leak in brcmf_cfg80211_attach() In brcmf_cfg80211_attach() there was one error path not properly handled as it leaked memory allocated in brcmf_btcoex_attach(). Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Reviewed-by: Franky Lin <franky.lin@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> | 20 December 2016, 14:09:03 UTC |
| e93b1cc | Linus Torvalds | 19 December 2016, 16:23:53 UTC | Merge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs Pull quota, fsnotify and ext2 updates from Jan Kara: "Changes to locking of some quota operations from dedicated quota mutex to s_umount semaphore, a fsnotify fix and a simple ext2 fix" * 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs: quota: Fix bogus warning in dquot_disable() fsnotify: Fix possible use-after-free in inode iteration on umount ext2: reject inodes with negative size quota: Remove dqonoff_mutex ocfs2: Use s_umount for quota recovery protection quota: Remove dqonoff_mutex from dquot_scan_active() ocfs2: Protect periodic quota syncing with s_umount semaphore quota: Use s_umount protection for quota operations quota: Hold s_umount in exclusive mode when enabling / disabling quotas fs: Provide function to get superblock with exclusive s_umount | 19 December 2016, 16:23:53 UTC |
| 45d3690 | Linus Torvalds | 19 December 2016, 16:21:29 UTC | Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm Pull KVM fixes from Paolo Bonzini: "Early fixes for x86. Instead of the (botched) revert, the lockdep/might_sleep splat has a real fix provided by Andrea" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: kvm: nVMX: Allow L1 to intercept software exceptions (#BP and #OF) kvm: take srcu lock around kvm_steal_time_set_preempted() kvm: fix schedule in atomic in kvm_steal_time_set_preempted() KVM: hyperv: fix locking of struct kvm_hv fields KVM: x86: Expose Intel AVX512IFMA/AVX512VBMI/SHA features to guest. kvm: nVMX: Correct a VMX instruction error code for VMPTRLD | 19 December 2016, 16:21:29 UTC |
| f1e9132 | Linus Torvalds | 19 December 2016, 16:18:58 UTC | Merge branch 'dmi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging Pull dmi fix from Jean Delvare. * 'dmi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging: firmware: dmi_scan: Always show system identification string | 19 December 2016, 16:18:58 UTC |
| ac5a28b | Linus Torvalds | 19 December 2016, 16:16:26 UTC | Merge tag 'mfd-for-linus-4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd Pull MFD updates from Lee Jones: "New Device Support - Add support for Ricoh RC5T619 PMIC to rn5t618 - Add support for PM8821 PMIC to qcom-pm8xxx New Functionality: - Add support for GPIO to lpc_ich - Add support for GPADC to sun4i - Add ability for rk808 to shutdown Fix-ups: - Simplify/strip unnecessary code; tps65218, palmas, tps65217 - Device Tree binding updates; tps65218, altera-a10sr - Provide/export device ID info; tps65218, axp20x-i2c, hi655x-pmic, fsl-imx25-tsadc, intel_soc_pmic_bxtwc - Use MFD API instead of of_platform_populate(); tps65218 - Generalise name-space; pm8xxx - Supply/edit regmap configuration; axp20x, cs47l24-tables, axp20x - Enable compile testing; max77620, max77686, exynos-lpass, abx500-core - Coding style issues; wm8994-core, wm5102-tables - Supply endian support; syscon - Remove module support; ab3100-core, ab8500-debugfs, ab8500-gpadc, abx500-core Bug Fixes: - Fix ordering issues; wm8994 - Fix dependencies (build-time/run-time); exynos_lpass, sun4i-gpadc - Fix compiler warnings; sun4i-gpadc - Fix leaks; mfd-core - Fix page fault during module unload; tps65217" * tag 'mfd-for-linus-4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (49 commits) mfd: tps65217: Support an interrupt pin as the system wakeup mfd: tps65217: Make an interrupt handler simpler mfd: tps65217: Update register interrupt mask bits instead of writing operation mfd: tps65217: Specify the IRQ name mfd: tps65217: Fix page fault on unloading modules mfd: palmas: Remove redundant check in palmas_power_off mfd: arizona: Disable IRQs during driver remove mfd: pm8xxx: add support to pm8821 mfd: intel-lpss: Try to enable Memory-Write-Invalidate mfd: rn5t618: Add Ricoh RC5T619 PMIC support mfd: axp20x: Add address extension registers for AXP806 regmap mfd: intel_soc_pmic_bxtwc: Fix a typo in MODULE_DEVICE_TABLE() mfd: core: Fix device reference leak in mfd_clone_cell mfd: bcm590xx: Simplify a test mfd: sun4i-gpadc: Select regmap-irq mfd: abx500-core: drop unused MODULE_ tags from non-modular code mfd: ab8500: make sysctrl explicitly non-modular mfd: ab8500-gpadc: Make it explicitly non-modular mfd: ab8500-debugfs: Make it explicitly non-modular mfd: ab8500-core: Make it explicitly non-modular ... | 19 December 2016, 16:16:26 UTC |
| ad688cd | Pavel Machek | 18 December 2016, 20:38:12 UTC | stmmac: fix memory barriers Fix up memory barriers in stmmac driver. They are meant to protect against DMA engine, so smp_ variants are certainly wrong, and dma_ variants are preferable. Signed-off-by: Pavel Machek <pavel@denx.de> Tested-by: Niklas Cassel <niklas.cassel@axis.com> Acked-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 19 December 2016, 16:05:02 UTC |
| 162809d | Arvind Yadav | 14 December 2016, 19:03:30 UTC | net: ethernet: cavium: octeon: octeon_mgmt: Handle return NULL error from devm_ioremap Here, If devm_ioremap will fail. It will return NULL. Kernel can run into a NULL-pointer dereference. This error check will avoid NULL pointer dereference. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 19 December 2016, 16:03:34 UTC |
| ef85b67 | Jim Mattson | 12 December 2016, 19:01:37 UTC | kvm: nVMX: Allow L1 to intercept software exceptions (#BP and #OF) When L2 exits to L0 due to "exception or NMI", software exceptions (#BP and #OF) for which L1 has requested an intercept should be handled by L1 rather than L0. Previously, only hardware exceptions were forwarded to L1. Signed-off-by: Jim Mattson <jmattson@google.com> Cc: stable@vger.kernel.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> | 19 December 2016, 15:05:31 UTC |
| cc0d907 | Andrea Arcangeli | 17 December 2016, 18:13:32 UTC | kvm: take srcu lock around kvm_steal_time_set_preempted() kvm_memslots() will be called by kvm_write_guest_offset_cached() so take the srcu lock. Signed-off-by: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> | 19 December 2016, 14:45:15 UTC |
| 931f261 | Andrea Arcangeli | 17 December 2016, 17:43:52 UTC | kvm: fix schedule in atomic in kvm_steal_time_set_preempted() kvm_steal_time_set_preempted() isn't disabling the pagefaults before calling __copy_to_user and the kernel debug notices. Signed-off-by: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> | 19 December 2016, 14:45:14 UTC |
| db4d22c | Sudeep Holla | 29 November 2016, 14:37:05 UTC | mailbox: mailbox-test: allow reserved areas in SRAM When CONFIG_SRAM is enable and the SRAM region is found, the entire SRAM region resource is requested and marked as occupied by SRAM driver even if certain parts of regions is marked reserved. It's quite possible that a small region of the SRAM is reserved for all the mailbox communication and hence it may fail to request the region as it's already marked busy region. This patch tries to just do a ioremap of this mailbox memory region if it finds it busy. Cc: Lee Jones <lee.jones@linaro.org> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org> | 19 December 2016, 14:40:23 UTC |
| baef9a3 | Sudeep Holla | 29 November 2016, 14:37:04 UTC | mailbox: mailbox-test: add support for fasync/poll Currently the read operation on the message debug file returns error if there's no data ready to be read. It expects the userspace to retry if it fails. Since the mailbox response could be asynchronous, it would be good to add support to block the read until the data is available. We can also implement poll file operations so that the userspace can wait to become ready to perform any I/O. This patch implements the poll and fasync file operation callback for the test mailbox device. Cc: Lee Jones <lee.jones@linaro.org> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org> | 19 December 2016, 14:40:23 UTC |
| cf17581 | Rob Rice | 14 November 2016, 18:26:05 UTC | mailbox: bcm-pdc: Remove unnecessary void* casts Remove unnecessary void* casts in register writes. Fix two other minor formatting issues. Signed-off-by: Rob Rice <rob.rice@broadcom.com> Reviewed-by: Andy Gospodarek <gospo@broadcom.com> Reviewed-by: Jon Mason <jon.mason@broadcom.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org> | 19 December 2016, 14:40:23 UTC |
| 30d1ef6 | Rob Rice | 14 November 2016, 18:26:04 UTC | mailbox: bcm-pdc: Simplify interrupt handler logic Earlier versions of the PDC driver registered for both transmit and receive interrupts. The hard IRQ handler had to communicate to the soft handler which interrupt(s) had occurred. The PDC driver no longer registers for tx interrupts. So there is no reason to save the intstatus. So remove the intstatus member of the PDC state. Signed-off-by: Rob Rice <rob.rice@broadcom.com> Reviewed-by: Andy Gospodarek <gospo@broadcom.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org> | 19 December 2016, 14:40:22 UTC |
| 63bb50b | Rob Rice | 14 November 2016, 18:26:03 UTC | mailbox: bcm-pdc: Performance improvements Three changes to improve performance in the PDC driver: - disable and reenable interrupts while the interrupt handler is running - update rxin and txin descriptor indexes more efficiently - group receive descriptor context into a structure and keep context in a single array rather than five to improve locality of reference Signed-off-by: Rob Rice <rob.rice@broadcom.com> Reviewed-by: Andy Gospodarek <gospo@broadcom.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org> | 19 December 2016, 14:40:22 UTC |
| 38ed49e | Rob Rice | 14 November 2016, 18:26:02 UTC | mailbox: bcm-pdc: Don't use iowrite32 to write DMA descriptors In PDC driver, it is not necessary to use iowrite32() when writing DMA descriptors to the transmit and receive rings. The ring memory is in host memory. So convert to normal assignment statements. Signed-off-by: Rob Rice <rob.rice@broadcom.com> Reviewed-by: Andy Gospodarek <gospo@broadcom.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org> | 19 December 2016, 14:40:21 UTC |
| 8aef00f | Rob Rice | 14 November 2016, 18:26:01 UTC | mailbox: bcm-pdc: Convert from threaded IRQ to tasklet Previously used threaded IRQs in the PDC driver to defer processing the rx DMA ring after getting an rx done interrupt. Instead, use a tasklet at normal priority for deferred processing. Signed-off-by: Rob Rice <rob.rice@broadcom.com> Reviewed-by: Andy Gospodarek <gospo@broadcom.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org> | 19 December 2016, 14:40:21 UTC |
| 7493cde | Rob Rice | 14 November 2016, 18:26:00 UTC | mailbox: bcm-pdc: Try to improve branch prediction Use likely/unlikely directives to improve branch prediction. Signed-off-by: Rob Rice <rob.rice@broadcom.com> Reviewed-by: Andy Gospodarek <gospo@broadcom.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org> | 19 December 2016, 14:40:20 UTC |
| e004c7e | Rob Rice | 14 November 2016, 18:25:59 UTC | mailbox: bcm-pdc: streamline rx code Remove the unnecessary rmb() from the receive path. If the rx ring has multiple messages ready, avoid reading last_rx_curr multiple times from the register. Signed-off-by: Rob Rice <rob.rice@broadcom.com> Reviewed-by: Andy Gospodarek <gospo@broadcom.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org> | 19 December 2016, 14:40:20 UTC |
| ab8d1b2 | Rob Rice | 14 November 2016, 18:25:58 UTC | mailbox: bcm-pdc: Convert from interrupts to poll for tx done The PDC driver is a mailbox controller. A mailbox controller can report that a mailbox message has been "transmitted" either when a tx interrupt fires or by having the mailbox framework poll. This commit converts the PDC driver to the poll method. We found that the tx interrupt happens when the descriptors are read by the SPU hw. Thus, the interrupt method does not allow more than one tx message in the PDC tx DMA ring at a time. To keep the SPU hw busy, we would like to keep the tx ring full under heavy load. With the poll method, the PDC driver responds that the previous message has been transmitted if the tx ring has space for another message. SPU request messages take a variable number of descriptors. If 15 descriptors are available, there is a good chance another message will fit. Also increased the ring size from 128 to 512 descriptors. With this change, I found the PDC driver hangs on its spinlock under heavy load. The PDC spinlock is not required; so I removed it. Calls to pdc_send_data() are already synchronized because of the channel spinlock in the mailbox framework. Other references to ring indexes should not require locking because they only written on either the tx or rx side. Signed-off-by: Rob Rice <rob.rice@broadcom.com> Reviewed-by: Andy Gospodarek <gospo@broadcom.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org> | 19 December 2016, 14:40:19 UTC |
| 9310f1d | Steve Lin | 14 November 2016, 18:25:57 UTC | mailbox: bcm-pdc: PDC driver leaves debugfs files after removal Minor fix to ensure that debugfs stats pseudo-files are removed when driver module is unloaded. Previously, the call to debugfs_remove_recursive() was never being called since the directory was not empty, and a seg fault would occur if another process tried to access these leftover files. Signed-off-by: Steve Lin <steven.lin1@broadcom.com> Signed-off-by: Rob Rice <rob.rice@broadcom.com> Reviewed-by: Andy Gospodarek <gospo@broadcom.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org> | 19 December 2016, 14:40:19 UTC |
| 9fb0f9a | Steve Lin | 14 November 2016, 18:25:56 UTC | mailbox: bcm-pdc: Changes so mbox client can be removed / re-inserted Ensure that DMA is disabled, and pointers reset, when changing DMA base addresses in pdc_ring_init(). This allows a mailbox client to be re-inserted after being removed. Otherwise, the DMA doesn't restart so the client hangs while being reinserted. Signed-off-by: Steve Lin <steven.lin1@broadcom.com> Signed-off-by: Rob Rice <rob.rice@broadcom.com> Reviewed-by: Andy Gospodarek <gospo@broadcom.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org> | 19 December 2016, 14:40:18 UTC |
| 9b1b2b3 | Rob Rice | 14 November 2016, 18:25:55 UTC | mailbox: bcm-pdc: Use octal permissions rather than symbolic When creating the debugfs files for the PDC driver, use octal file permissions rather than symbolic file permissions. Signed-off-by: Rob Rice <rob.rice@broadcom.com> Reviewed-by: Andy Gospodarek <gospo@broadcom.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org> | 19 December 2016, 14:40:18 UTC |
| 2f50497 | Javier Martinez Canillas | 20 October 2016, 03:34:05 UTC | mailbox: sti: Fix module autoload for OF registration If the driver is built as a module, autoload won't work because the module alias information is not filled. So user-space can't match the registered device with the corresponding module. Export the module alias information using the MODULE_DEVICE_TABLE() macro. Before this patch: $ modinfo drivers/mailbox/mailbox-sti.ko | grep alias alias: platform:mailbox-sti After this patch: $ modinfo drivers/mailbox/mailbox-sti.ko | grep alias alias: platform:mailbox-sti alias: of:N*T*Cst,stih407-mailboxC* alias: of:N*T*Cst,stih407-mailbox Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org> | 19 December 2016, 14:40:18 UTC |
| f42cce3 | Javier Martinez Canillas | 20 October 2016, 03:34:04 UTC | mailbox: mailbox-test: Fix module autoload If the driver is built as a module, autoload won't work because the module alias information is not filled. So user-space can't match the registered device with the corresponding module. Export the module alias information using the MODULE_DEVICE_TABLE() macro. Before this patch: $ modinfo drivers/mailbox/mailbox-test.ko | grep alias $ After this patch: $ modinfo drivers/mailbox/mailbox-test.ko | grep alias alias: of:N*T*Cmailbox-testC* alias: of:N*T*Cmailbox-test Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org> | 19 December 2016, 14:40:17 UTC |
| 2700e60 | Jan Kara | 19 December 2016, 13:01:39 UTC | quota: Fix bogus warning in dquot_disable() dquot_disable() was warning when sb_has_quota_loaded() was true when invalidating page cache for quota files. The thinking behind this warning was that we must have raced with somebody else turning quotas on and this should not happen because all places modifying quota state must hold s_umount exclusively now. However sb_has_quota_loaded() can be also true at this point when we are just suspending quotas on remount read-only. Just restore the behavior to situation before commit c3b004460d77 ("quota: Remove dqonoff_mutex") which introduced the warning. The code in dquot_disable() can be further simplified with the new locking of quota state changes however let's leave that to a separate commit that can get more testing exposure. Fixes: c3b004460d77bf3f980d877be539016f2df4df12 Signed-off-by: Jan Kara <jack@suse.cz> | 19 December 2016, 13:01:39 UTC |
| d4af49f | Kefeng Wang | 19 December 2016, 09:01:47 UTC | firmware: dmi_scan: Always show system identification string Let's keep consistent when print dmi_ids_string between SMBIOS 2.x and SMBIOS 3.x, and always show the system identification string, like Vendor, Product/Board name and BIOS infos. Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com> Signed-off-by: Jean Delvare <jdelvare@suse.de> | 19 December 2016, 09:01:47 UTC |
| b0b3a37 | Linus Torvalds | 19 December 2016, 02:18:03 UTC | Merge tag 'rtc-4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux Pull RTC updates from Alexandre Belloni: "Subsystem: - non-modular drivers are now explicitly non-modular New driver: - Epson Toyocom rtc-7301sf/dg Drivers: - cmos: reject unsupported alarm values wrt the RTC capabilities - ds1307: ACPI support - jz4740: DT support, jz4780 handling, can now be used as a system power controller - mcp795: many fixes, in particular proper month handling - twl: driver is now DT only" * tag 'rtc-4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (31 commits) rtc: mcp795: Fix whitespace and indentation. rtc: mcp795: Prefer using the BIT() macro. rtc: mcp795: fix month write resetting date to 1. rtc: mcp795: fix time range difference between linux and RTC chip. rtc: mcp795: fix bitmask value for leap year (LP). rtc: mcp795: use bcd2bin/bin2bcd. rtc: add support for EPSON TOYOCOM RTC-7301SF/DG rtc: ds1307: Add ACPI support rtc: imxdi: (trivial) fix a typo rtc: ds1374: Merge conditional + WARN_ON() rtc: twl: make driver DT only rtc: twl: kill static variables rtc: fix typos in Kconfig rtc: jz4740: make the driver builtin only rtc: jz4740: remove unused EXPORT_SYMBOL Documentation: bindings: fix twl-rtc documentation rtc: Enable compile testing for Maxim and Samsung drivers MIPS: jz4740: Remove obsolete code MIPS: qi_lb60: Probe RTC driver from DT and use it as power controller MIPS: jz4740: DTS: Probe the jz4740-rtc driver from devicetree ... | 19 December 2016, 02:18:03 UTC |
| d3e5925 | Emil Bartczak | 07 December 2016, 23:27:42 UTC | rtc: mcp795: Fix whitespace and indentation. Fix whitespace and indentation errors and the following checkpatch warnings: - line 15: Block comments use a trailing */ on a separate line - line 256: Line over 80 characters No code change. Signed-off-by: Emil Bartczak <emilbart@gmail.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> | 18 December 2016, 23:59:25 UTC |
| a2b4299 | Emil Bartczak | 07 December 2016, 23:27:41 UTC | rtc: mcp795: Prefer using the BIT() macro. This patch doesn't change the code but replaces all bitmask values with the BIT(x) macro. Signed-off-by: Emil Bartczak <emilbart@gmail.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> | 18 December 2016, 23:59:24 UTC |
| 43d0b10 | Emil Bartczak | 07 December 2016, 23:27:40 UTC | rtc: mcp795: fix month write resetting date to 1. According to Microchip errata some combinations of date and month values may result in the date being reset to 1, even if the date is also written with the month (for example 31-07 or 31-08). As a workaround avoid writing date and month values within the same Write command. Instead, terminate the Write command after loading the date and begin a new command to write the month. In addition, disable the oscillator before loading the new values. This is done by ensuring both the ST and EXTOSC bits are cleared and waiting for the OSCON bit to clear. Signed-off-by: Emil Bartczak <emilbart@gmail.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> | 18 December 2016, 23:59:23 UTC |
| 26eeefd | Emil Bartczak | 07 December 2016, 23:27:39 UTC | rtc: mcp795: fix time range difference between linux and RTC chip. In linux rtc_time struct, tm_mon range is 0~11, while in RTC HW REG, month range is 1~12. This patch adjusts difference of them. Signed-off-by: Emil Bartczak <emilbart@gmail.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> | 18 December 2016, 23:59:23 UTC |
| e72765c | Emil Bartczak | 07 December 2016, 23:27:38 UTC | rtc: mcp795: fix bitmask value for leap year (LP). According the datasheet the leap year is a fifth bit in month register. Signed-off-by: Emil Bartczak <emilbart@gmail.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> | 18 December 2016, 23:59:22 UTC |
| bcf18d8 | Emil Bartczak | 07 December 2016, 23:27:37 UTC | rtc: mcp795: use bcd2bin/bin2bcd. Change rtc-mcp795.c to use the bcd2bin/bin2bcd functions. This change fixes the wrong conversion of month value from binary to BCD (missing right shift operation for 10 month). Signed-off-by: Emil Bartczak <emilbart@gmail.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> | 18 December 2016, 23:59:22 UTC |
| 0b6a8f5 | Akinobu Mita | 04 December 2016, 14:04:39 UTC | rtc: add support for EPSON TOYOCOM RTC-7301SF/DG This adds support for EPSON TOYOCOM RTC-7301SF/DG which has parallel interface compatible with SRAM. This driver supports basic clock, calendar and alarm functionality. Tested with Microblaze linux running on Artix7 FPGA board with my own custom IP for RTC-7301. Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> | 18 December 2016, 23:59:21 UTC |
| 9c19b89 | Tin Huynh | 30 November 2016, 02:57:31 UTC | rtc: ds1307: Add ACPI support This patch enables ACPI support for rtc-ds1307 driver. Signed-off-by: Tin Huynh <tnhuynh@apm.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> | 18 December 2016, 23:59:07 UTC |
| 3be134e | Linus Torvalds | 18 December 2016, 23:49:10 UTC | Merge tag 'libnvdimm-for-4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm Pull libnvdimm updates from Dan Williams: "The libnvdimm pull request is relatively small this time around due to some development topics being deferred to 4.11. As for this pull request the bulk of it has been in -next for several releases leading to one late fix being added (commit 868f036fee4b ("libnvdimm: fix mishandled nvdimm_clear_poison() return value")). It has received a build success notification from the 0day-kbuild robot and passes the latest libnvdimm unit tests. Summary: - Dynamic label support: To date namespace label support has been limited to disambiguating cases where PMEM (direct load/store) and BLK (mmio aperture) accessed-capacity alias on the same DIMM. Since 4.9 added support for multiple namespaces per PMEM-region there is value to support namespace labels even in the non-aliasing case. The presence of a valid namespace index block force-enables label support when the kernel would otherwise rely on region boundaries, and permits the region to be sub-divided. - Handle media errors in namespace metadata: Complement the error handling for media errors in namespace data areas with support for clearing errors on writes, and downgrading potential machine-check exceptions to simple i/o errors on read. - Device-DAX region attributes: Add 'align', 'id', and 'size' as attributes for device-dax regions. In particular this enables userspace tooling to generically size memory mapping and i/o operations. Prevent userspace from growing assumptions / dependencies about the parent device topology for a dax region. A libnvdimm namespace may not always be the parent device of a dax region. - Various cleanups and small fixes" * tag 'libnvdimm-for-4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: dax: add region 'id', 'size', and 'align' attributes libnvdimm: fix mishandled nvdimm_clear_poison() return value libnvdimm: replace mutex_is_locked() warnings with lockdep_assert_held libnvdimm, pfn: fix align attribute libnvdimm, e820: use module_platform_driver libnvdimm, namespace: use octal for permissions libnvdimm, namespace: avoid multiple sector calculations libnvdimm: remove else after return in nsio_rw_bytes() libnvdimm, namespace: fix the type of name variable libnvdimm: use consistent naming for request_mem_region() nvdimm: use the right length of "pmem" libnvdimm: check and clear poison before writing to pmem tools/testing/nvdimm: dynamic label support libnvdimm: allow a platform to force enable label support libnvdimm: use generic iostat interfaces | 18 December 2016, 23:49:10 UTC |
| 8421c60 | Linus Torvalds | 18 December 2016, 23:45:33 UTC | Merge tag 'platform-drivers-x86-v4.10-2' of git://git.infradead.org/users/dvhart/linux-platform-drivers-x86 Pull more x86 platform driver updates from Darren Hart: "Move and add registration for the mlx-platform driver. Introduce button and lid drivers for the surface3 (different from the surface3-pro). Add BXT PMIC TMU support. Add Y700 to existing ideapad-laptop quirk. Summary: ideapad-laptop: - Add Y700 15-ACZ to no_hw_rfkill DMI list surface3_button: - Introduce button support for the Surface 3 surface3-wmi: - Add custom surface3 platform device for controlling LID - Balance locking on error path mlx-platform: - Add mlxcpld-hotplug driver registration - Fix semicolon.cocci warnings - Move module from arch/x86 platform/x86: - Add Whiskey Cove PMIC TMU support" * tag 'platform-drivers-x86-v4.10-2' of git://git.infradead.org/users/dvhart/linux-platform-drivers-x86: platform/x86: surface3-wmi: Balance locking on error path platform/x86: Add Whiskey Cove PMIC TMU support platform/x86: ideapad-laptop: Add Y700 15-ACZ to no_hw_rfkill DMI list platform/x86: Introduce button support for the Surface 3 platform/x86: Add custom surface3 platform device for controlling LID platform/x86: mlx-platform: Add mlxcpld-hotplug driver registration platform/x86: mlx-platform: Fix semicolon.cocci warnings platform/x86: mlx-platform: Move module from arch/x86 | 18 December 2016, 23:45:33 UTC |
| 83da6b5 | Andy Shevchenko | 15 December 2016, 01:10:02 UTC | platform/x86: surface3-wmi: Balance locking on error path There is a possibility that lock will be left acquired. Consolidate error path under out_free_unlock label. Reported-by: kbuild test robot <fengguang.wu@intel.com> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> | 18 December 2016, 22:56:43 UTC |
| 957ae50 | Nilesh Bacchewar | 07 November 2016, 20:11:47 UTC | platform/x86: Add Whiskey Cove PMIC TMU support This adds TMU (Time Management Unit) support for Intel BXT platform. It enables the alarm wake-up functionality in the TMU unit of Whiskey Cove PMIC. Signed-off-by: Nilesh Bacchewar <nilesh.bacchewar@intel.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> [andy: resolve merge conflict in Kconfig] Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> | 18 December 2016, 22:56:37 UTC |
