Revision d9e48dc2a71a836f17d1febbedb31470f957edb4 authored by Linus Torvalds on 05 December 2019, 19:28:14 UTC, committed by Linus Torvalds on 05 December 2019, 19:28:14 UTC
Pull pwm updates from Thierry Reding: "Various changes and minor fixes across a couple of drivers" * tag 'pwm/for-5.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: pwm: stm32: Pass breakinput instead of its values pwm: stm32: Remove clutter from ternary operator pwm: stm32: Validate breakinput data from DT pwm: Update comment on struct pwm_ops::apply pwm: sun4i: Fix incorrect calculation of duty_cycle/period pwm: stm32: Add power management support pwm: stm32: Split breakinput apply routine to ease PM support dt-bindings: pwm-stm32: Document pinctrl sleep state pwm: sun4i: Drop redundant assignment to variable pval dt-bindings: pwm: mediatek: Remove gratuitous compatible string for MT7629
cros_usbpd-charger.c
// SPDX-License-Identifier: GPL-2.0+
/*
* Power supply driver for ChromeOS EC based USB PD Charger.
*
* Copyright (c) 2014 - 2018 Google, Inc
*/
#include <linux/mfd/cros_ec.h>
#include <linux/module.h>
#include <linux/platform_data/cros_ec_commands.h>
#include <linux/platform_data/cros_ec_proto.h>
#include <linux/platform_device.h>
#include <linux/power_supply.h>
#include <linux/slab.h>
#define CHARGER_USBPD_DIR_NAME "CROS_USBPD_CHARGER%d"
#define CHARGER_DEDICATED_DIR_NAME "CROS_DEDICATED_CHARGER"
#define CHARGER_DIR_NAME_LENGTH (sizeof(CHARGER_USBPD_DIR_NAME) >= \
sizeof(CHARGER_DEDICATED_DIR_NAME) ? \
sizeof(CHARGER_USBPD_DIR_NAME) : \
sizeof(CHARGER_DEDICATED_DIR_NAME))
#define CHARGER_CACHE_UPDATE_DELAY msecs_to_jiffies(500)
#define CHARGER_MANUFACTURER_MODEL_LENGTH 32
#define DRV_NAME "cros-usbpd-charger"
struct port_data {
int port_number;
char name[CHARGER_DIR_NAME_LENGTH];
char manufacturer[CHARGER_MANUFACTURER_MODEL_LENGTH];
char model_name[CHARGER_MANUFACTURER_MODEL_LENGTH];
struct power_supply *psy;
struct power_supply_desc psy_desc;
int psy_usb_type;
int psy_online;
int psy_status;
int psy_current_max;
int psy_voltage_max_design;
int psy_voltage_now;
int psy_power_max;
struct charger_data *charger;
unsigned long last_update;
};
struct charger_data {
struct device *dev;
struct cros_ec_dev *ec_dev;
struct cros_ec_device *ec_device;
int num_charger_ports;
int num_usbpd_ports;
int num_registered_psy;
struct port_data *ports[EC_USB_PD_MAX_PORTS];
struct notifier_block notifier;
};
static enum power_supply_property cros_usbpd_charger_props[] = {
POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT,
POWER_SUPPLY_PROP_INPUT_VOLTAGE_LIMIT,
POWER_SUPPLY_PROP_ONLINE,
POWER_SUPPLY_PROP_STATUS,
POWER_SUPPLY_PROP_CURRENT_MAX,
POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN,
POWER_SUPPLY_PROP_VOLTAGE_NOW,
POWER_SUPPLY_PROP_MODEL_NAME,
POWER_SUPPLY_PROP_MANUFACTURER,
POWER_SUPPLY_PROP_USB_TYPE
};
static enum power_supply_property cros_usbpd_dedicated_charger_props[] = {
POWER_SUPPLY_PROP_ONLINE,
POWER_SUPPLY_PROP_STATUS,
POWER_SUPPLY_PROP_VOLTAGE_NOW,
};
static enum power_supply_usb_type cros_usbpd_charger_usb_types[] = {
POWER_SUPPLY_USB_TYPE_UNKNOWN,
POWER_SUPPLY_USB_TYPE_SDP,
POWER_SUPPLY_USB_TYPE_DCP,
POWER_SUPPLY_USB_TYPE_CDP,
POWER_SUPPLY_USB_TYPE_C,
POWER_SUPPLY_USB_TYPE_PD,
POWER_SUPPLY_USB_TYPE_PD_DRP,
POWER_SUPPLY_USB_TYPE_APPLE_BRICK_ID
};
/* Input voltage/current limit in mV/mA. Default to none. */
static u16 input_voltage_limit = EC_POWER_LIMIT_NONE;
static u16 input_current_limit = EC_POWER_LIMIT_NONE;
static bool cros_usbpd_charger_port_is_dedicated(struct port_data *port)
{
return port->port_number >= port->charger->num_usbpd_ports;
}
static int cros_usbpd_charger_ec_command(struct charger_data *charger,
unsigned int version,
unsigned int command,
void *outdata,
unsigned int outsize,
void *indata,
unsigned int insize)
{
struct cros_ec_dev *ec_dev = charger->ec_dev;
struct cros_ec_command *msg;
int ret;
msg = kzalloc(sizeof(*msg) + max(outsize, insize), GFP_KERNEL);
if (!msg)
return -ENOMEM;
msg->version = version;
msg->command = ec_dev->cmd_offset + command;
msg->outsize = outsize;
msg->insize = insize;
if (outsize)
memcpy(msg->data, outdata, outsize);
ret = cros_ec_cmd_xfer_status(charger->ec_device, msg);
if (ret >= 0 && insize)
memcpy(indata, msg->data, insize);
kfree(msg);
return ret;
}
static int cros_usbpd_charger_get_num_ports(struct charger_data *charger)
{
struct ec_response_charge_port_count resp;
int ret;
ret = cros_usbpd_charger_ec_command(charger, 0,
EC_CMD_CHARGE_PORT_COUNT,
NULL, 0, &resp, sizeof(resp));
if (ret < 0) {
dev_err(charger->dev,
"Unable to get the number of ports (err:0x%x)\n", ret);
return ret;
}
return resp.port_count;
}
static int cros_usbpd_charger_get_usbpd_num_ports(struct charger_data *charger)
{
struct ec_response_usb_pd_ports resp;
int ret;
ret = cros_usbpd_charger_ec_command(charger, 0, EC_CMD_USB_PD_PORTS,
NULL, 0, &resp, sizeof(resp));
if (ret < 0) {
dev_err(charger->dev,
"Unable to get the number or ports (err:0x%x)\n", ret);
return ret;
}
return resp.num_ports;
}
static int cros_usbpd_charger_get_discovery_info(struct port_data *port)
{
struct charger_data *charger = port->charger;
struct ec_params_usb_pd_discovery_entry resp;
struct ec_params_usb_pd_info_request req;
int ret;
req.port = port->port_number;
ret = cros_usbpd_charger_ec_command(charger, 0,
EC_CMD_USB_PD_DISCOVERY,
&req, sizeof(req),
&resp, sizeof(resp));
if (ret < 0) {
dev_err(charger->dev,
"Unable to query discovery info (err:0x%x)\n", ret);
return ret;
}
dev_dbg(charger->dev, "Port %d: VID = 0x%x, PID=0x%x, PTYPE=0x%x\n",
port->port_number, resp.vid, resp.pid, resp.ptype);
snprintf(port->manufacturer, sizeof(port->manufacturer), "%x",
resp.vid);
snprintf(port->model_name, sizeof(port->model_name), "%x", resp.pid);
return 0;
}
static int cros_usbpd_charger_get_power_info(struct port_data *port)
{
struct charger_data *charger = port->charger;
struct ec_response_usb_pd_power_info resp;
struct ec_params_usb_pd_power_info req;
int last_psy_status, last_psy_usb_type;
struct device *dev = charger->dev;
int ret;
req.port = port->port_number;
ret = cros_usbpd_charger_ec_command(charger, 0,
EC_CMD_USB_PD_POWER_INFO,
&req, sizeof(req),
&resp, sizeof(resp));
if (ret < 0) {
dev_err(dev, "Unable to query PD power info (err:0x%x)\n", ret);
return ret;
}
last_psy_status = port->psy_status;
last_psy_usb_type = port->psy_usb_type;
switch (resp.role) {
case USB_PD_PORT_POWER_DISCONNECTED:
port->psy_status = POWER_SUPPLY_STATUS_NOT_CHARGING;
port->psy_online = 0;
break;
case USB_PD_PORT_POWER_SOURCE:
port->psy_status = POWER_SUPPLY_STATUS_NOT_CHARGING;
port->psy_online = 0;
break;
case USB_PD_PORT_POWER_SINK:
port->psy_status = POWER_SUPPLY_STATUS_CHARGING;
port->psy_online = 1;
break;
case USB_PD_PORT_POWER_SINK_NOT_CHARGING:
port->psy_status = POWER_SUPPLY_STATUS_NOT_CHARGING;
port->psy_online = 1;
break;
default:
dev_err(dev, "Unknown role %d\n", resp.role);
break;
}
port->psy_voltage_max_design = resp.meas.voltage_max;
port->psy_voltage_now = resp.meas.voltage_now;
port->psy_current_max = resp.meas.current_max;
port->psy_power_max = resp.max_power;
switch (resp.type) {
case USB_CHG_TYPE_BC12_SDP:
case USB_CHG_TYPE_VBUS:
port->psy_usb_type = POWER_SUPPLY_USB_TYPE_SDP;
break;
case USB_CHG_TYPE_NONE:
/*
* For dual-role devices when we are a source, the firmware
* reports the type as NONE. Report such chargers as type
* USB_PD_DRP.
*/
if (resp.role == USB_PD_PORT_POWER_SOURCE && resp.dualrole)
port->psy_usb_type = POWER_SUPPLY_USB_TYPE_PD_DRP;
else
port->psy_usb_type = POWER_SUPPLY_USB_TYPE_SDP;
break;
case USB_CHG_TYPE_OTHER:
case USB_CHG_TYPE_PROPRIETARY:
port->psy_usb_type = POWER_SUPPLY_USB_TYPE_APPLE_BRICK_ID;
break;
case USB_CHG_TYPE_C:
port->psy_usb_type = POWER_SUPPLY_USB_TYPE_C;
break;
case USB_CHG_TYPE_BC12_DCP:
port->psy_usb_type = POWER_SUPPLY_USB_TYPE_DCP;
break;
case USB_CHG_TYPE_BC12_CDP:
port->psy_usb_type = POWER_SUPPLY_USB_TYPE_CDP;
break;
case USB_CHG_TYPE_PD:
if (resp.dualrole)
port->psy_usb_type = POWER_SUPPLY_USB_TYPE_PD_DRP;
else
port->psy_usb_type = POWER_SUPPLY_USB_TYPE_PD;
break;
case USB_CHG_TYPE_UNKNOWN:
/*
* While the EC is trying to determine the type of charger that
* has been plugged in, it will report the charger type as
* unknown. Additionally since the power capabilities are
* unknown, report the max current and voltage as zero.
*/
port->psy_usb_type = POWER_SUPPLY_USB_TYPE_UNKNOWN;
port->psy_voltage_max_design = 0;
port->psy_current_max = 0;
break;
default:
dev_err(dev, "Port %d: default case!\n", port->port_number);
port->psy_usb_type = POWER_SUPPLY_USB_TYPE_SDP;
}
if (cros_usbpd_charger_port_is_dedicated(port))
port->psy_desc.type = POWER_SUPPLY_TYPE_MAINS;
else
port->psy_desc.type = POWER_SUPPLY_TYPE_USB;
dev_dbg(dev,
"Port %d: type=%d vmax=%d vnow=%d cmax=%d clim=%d pmax=%d\n",
port->port_number, resp.type, resp.meas.voltage_max,
resp.meas.voltage_now, resp.meas.current_max,
resp.meas.current_lim, resp.max_power);
/*
* If power supply type or status changed, explicitly call
* power_supply_changed. This results in udev event getting generated
* and allows user mode apps to react quicker instead of waiting for
* their next poll of power supply status.
*/
if (last_psy_usb_type != port->psy_usb_type ||
last_psy_status != port->psy_status)
power_supply_changed(port->psy);
return 0;
}
static int cros_usbpd_charger_get_port_status(struct port_data *port,
bool ratelimit)
{
int ret;
if (ratelimit &&
time_is_after_jiffies(port->last_update +
CHARGER_CACHE_UPDATE_DELAY))
return 0;
ret = cros_usbpd_charger_get_power_info(port);
if (ret < 0)
return ret;
if (!cros_usbpd_charger_port_is_dedicated(port))
ret = cros_usbpd_charger_get_discovery_info(port);
port->last_update = jiffies;
return ret;
}
static int cros_usbpd_charger_set_ext_power_limit(struct charger_data *charger,
u16 current_lim,
u16 voltage_lim)
{
struct ec_params_external_power_limit_v1 req;
int ret;
req.current_lim = current_lim;
req.voltage_lim = voltage_lim;
ret = cros_usbpd_charger_ec_command(charger, 0,
EC_CMD_EXTERNAL_POWER_LIMIT,
&req, sizeof(req), NULL, 0);
if (ret < 0)
dev_err(charger->dev,
"Unable to set the 'External Power Limit': %d\n", ret);
return ret;
}
static void cros_usbpd_charger_power_changed(struct power_supply *psy)
{
struct port_data *port = power_supply_get_drvdata(psy);
struct charger_data *charger = port->charger;
int i;
for (i = 0; i < charger->num_registered_psy; i++)
cros_usbpd_charger_get_port_status(charger->ports[i], false);
}
static int cros_usbpd_charger_get_prop(struct power_supply *psy,
enum power_supply_property psp,
union power_supply_propval *val)
{
struct port_data *port = power_supply_get_drvdata(psy);
struct charger_data *charger = port->charger;
struct cros_ec_device *ec_device = charger->ec_device;
struct device *dev = charger->dev;
int ret;
/* Only refresh ec_port_status for dynamic properties */
switch (psp) {
case POWER_SUPPLY_PROP_ONLINE:
/*
* If mkbp_event_supported, then we can be assured that
* the driver's state for the online property is consistent
* with the hardware. However, if we aren't event driven,
* the optimization before to skip an ec_port_status get
* and only returned cached values of the online property will
* cause a delay in detecting a cable attach until one of the
* other properties are read.
*
* Allow an ec_port_status refresh for online property check
* if we're not already online to check for plug events if
* not mkbp_event_supported.
*/
if (ec_device->mkbp_event_supported || port->psy_online)
break;
/* fall through */
case POWER_SUPPLY_PROP_CURRENT_MAX:
case POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN:
case POWER_SUPPLY_PROP_VOLTAGE_NOW:
ret = cros_usbpd_charger_get_port_status(port, true);
if (ret < 0) {
dev_err(dev, "Failed to get port status (err:0x%x)\n",
ret);
return -EINVAL;
}
break;
default:
break;
}
switch (psp) {
case POWER_SUPPLY_PROP_ONLINE:
val->intval = port->psy_online;
break;
case POWER_SUPPLY_PROP_STATUS:
val->intval = port->psy_status;
break;
case POWER_SUPPLY_PROP_CURRENT_MAX:
val->intval = port->psy_current_max * 1000;
break;
case POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN:
val->intval = port->psy_voltage_max_design * 1000;
break;
case POWER_SUPPLY_PROP_VOLTAGE_NOW:
val->intval = port->psy_voltage_now * 1000;
break;
case POWER_SUPPLY_PROP_USB_TYPE:
val->intval = port->psy_usb_type;
break;
case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT:
if (input_current_limit == EC_POWER_LIMIT_NONE)
val->intval = -1;
else
val->intval = input_current_limit * 1000;
break;
case POWER_SUPPLY_PROP_INPUT_VOLTAGE_LIMIT:
if (input_voltage_limit == EC_POWER_LIMIT_NONE)
val->intval = -1;
else
val->intval = input_voltage_limit * 1000;
break;
case POWER_SUPPLY_PROP_MODEL_NAME:
val->strval = port->model_name;
break;
case POWER_SUPPLY_PROP_MANUFACTURER:
val->strval = port->manufacturer;
break;
default:
return -EINVAL;
}
return 0;
}
static int cros_usbpd_charger_set_prop(struct power_supply *psy,
enum power_supply_property psp,
const union power_supply_propval *val)
{
struct port_data *port = power_supply_get_drvdata(psy);
struct charger_data *charger = port->charger;
struct device *dev = charger->dev;
u16 intval;
int ret;
/* U16_MAX in mV/mA is the maximum supported value */
if (val->intval >= U16_MAX * 1000)
return -EINVAL;
/* A negative number is used to clear the limit */
if (val->intval < 0)
intval = EC_POWER_LIMIT_NONE;
else /* Convert from uA/uV to mA/mV */
intval = val->intval / 1000;
switch (psp) {
case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT:
ret = cros_usbpd_charger_set_ext_power_limit(charger, intval,
input_voltage_limit);
if (ret < 0)
break;
input_current_limit = intval;
if (input_current_limit == EC_POWER_LIMIT_NONE)
dev_info(dev,
"External Current Limit cleared for all ports\n");
else
dev_info(dev,
"External Current Limit set to %dmA for all ports\n",
input_current_limit);
break;
case POWER_SUPPLY_PROP_INPUT_VOLTAGE_LIMIT:
ret = cros_usbpd_charger_set_ext_power_limit(charger,
input_current_limit,
intval);
if (ret < 0)
break;
input_voltage_limit = intval;
if (input_voltage_limit == EC_POWER_LIMIT_NONE)
dev_info(dev,
"External Voltage Limit cleared for all ports\n");
else
dev_info(dev,
"External Voltage Limit set to %dmV for all ports\n",
input_voltage_limit);
break;
default:
ret = -EINVAL;
}
return ret;
}
static int cros_usbpd_charger_property_is_writeable(struct power_supply *psy,
enum power_supply_property psp)
{
int ret;
switch (psp) {
case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT:
case POWER_SUPPLY_PROP_INPUT_VOLTAGE_LIMIT:
ret = 1;
break;
default:
ret = 0;
}
return ret;
}
static int cros_usbpd_charger_ec_event(struct notifier_block *nb,
unsigned long queued_during_suspend,
void *_notify)
{
struct cros_ec_device *ec_device;
struct charger_data *charger;
u32 host_event;
charger = container_of(nb, struct charger_data, notifier);
ec_device = charger->ec_device;
host_event = cros_ec_get_host_event(ec_device);
if (host_event & EC_HOST_EVENT_MASK(EC_HOST_EVENT_PD_MCU)) {
cros_usbpd_charger_power_changed(charger->ports[0]->psy);
return NOTIFY_OK;
} else {
return NOTIFY_DONE;
}
}
static void cros_usbpd_charger_unregister_notifier(void *data)
{
struct charger_data *charger = data;
struct cros_ec_device *ec_device = charger->ec_device;
blocking_notifier_chain_unregister(&ec_device->event_notifier,
&charger->notifier);
}
static int cros_usbpd_charger_probe(struct platform_device *pd)
{
struct cros_ec_dev *ec_dev = dev_get_drvdata(pd->dev.parent);
struct cros_ec_device *ec_device = ec_dev->ec_dev;
struct power_supply_desc *psy_desc;
struct device *dev = &pd->dev;
struct charger_data *charger;
struct power_supply *psy;
struct port_data *port;
int ret = -EINVAL;
int i;
charger = devm_kzalloc(dev, sizeof(struct charger_data),
GFP_KERNEL);
if (!charger)
return -ENOMEM;
charger->dev = dev;
charger->ec_dev = ec_dev;
charger->ec_device = ec_device;
platform_set_drvdata(pd, charger);
/*
* We need to know the number of USB PD ports in order to know whether
* there is a dedicated port. The dedicated port will always be
* after the USB PD ports, and there should be only one.
*/
charger->num_usbpd_ports =
cros_usbpd_charger_get_usbpd_num_ports(charger);
if (charger->num_usbpd_ports <= 0) {
/*
* This can happen on a system that doesn't support USB PD.
* Log a message, but no need to warn.
*/
dev_info(dev, "No USB PD charging ports found\n");
}
charger->num_charger_ports = cros_usbpd_charger_get_num_ports(charger);
if (charger->num_charger_ports < 0) {
/*
* This can happen on a system that doesn't support USB PD.
* Log a message, but no need to warn.
* Older ECs do not support the above command, in that case
* let's set up the number of charger ports equal to the number
* of USB PD ports
*/
dev_info(dev, "Could not get charger port count\n");
charger->num_charger_ports = charger->num_usbpd_ports;
}
if (charger->num_charger_ports <= 0) {
/*
* This can happen on a system that doesn't support USB PD and
* doesn't have a dedicated port.
* Log a message, but no need to warn.
*/
dev_info(dev, "No charging ports found\n");
ret = -ENODEV;
goto fail_nowarn;
}
/*
* Sanity checks on the number of ports:
* there should be at most 1 dedicated port
*/
if (charger->num_charger_ports < charger->num_usbpd_ports ||
charger->num_charger_ports > (charger->num_usbpd_ports + 1)) {
dev_err(dev, "Unexpected number of charge port count\n");
ret = -EPROTO;
goto fail_nowarn;
}
for (i = 0; i < charger->num_charger_ports; i++) {
struct power_supply_config psy_cfg = {};
port = devm_kzalloc(dev, sizeof(struct port_data), GFP_KERNEL);
if (!port) {
ret = -ENOMEM;
goto fail;
}
port->charger = charger;
port->port_number = i;
psy_desc = &port->psy_desc;
psy_desc->get_property = cros_usbpd_charger_get_prop;
psy_desc->set_property = cros_usbpd_charger_set_prop;
psy_desc->property_is_writeable =
cros_usbpd_charger_property_is_writeable;
psy_desc->external_power_changed =
cros_usbpd_charger_power_changed;
psy_cfg.drv_data = port;
if (cros_usbpd_charger_port_is_dedicated(port)) {
sprintf(port->name, CHARGER_DEDICATED_DIR_NAME);
psy_desc->type = POWER_SUPPLY_TYPE_MAINS;
psy_desc->properties =
cros_usbpd_dedicated_charger_props;
psy_desc->num_properties =
ARRAY_SIZE(cros_usbpd_dedicated_charger_props);
} else {
sprintf(port->name, CHARGER_USBPD_DIR_NAME, i);
psy_desc->type = POWER_SUPPLY_TYPE_USB;
psy_desc->properties = cros_usbpd_charger_props;
psy_desc->num_properties =
ARRAY_SIZE(cros_usbpd_charger_props);
psy_desc->usb_types = cros_usbpd_charger_usb_types;
psy_desc->num_usb_types =
ARRAY_SIZE(cros_usbpd_charger_usb_types);
}
psy_desc->name = port->name;
psy = devm_power_supply_register_no_ws(dev, psy_desc,
&psy_cfg);
if (IS_ERR(psy)) {
dev_err(dev, "Failed to register power supply\n");
continue;
}
port->psy = psy;
charger->ports[charger->num_registered_psy++] = port;
}
if (!charger->num_registered_psy) {
ret = -ENODEV;
dev_err(dev, "No power supplies registered\n");
goto fail;
}
if (ec_device->mkbp_event_supported) {
/* Get PD events from the EC */
charger->notifier.notifier_call = cros_usbpd_charger_ec_event;
ret = blocking_notifier_chain_register(
&ec_device->event_notifier,
&charger->notifier);
if (ret < 0) {
dev_warn(dev, "failed to register notifier\n");
} else {
ret = devm_add_action_or_reset(dev,
cros_usbpd_charger_unregister_notifier,
charger);
if (ret < 0)
goto fail;
}
}
return 0;
fail:
WARN(1, "%s: Failing probe (err:0x%x)\n", dev_name(dev), ret);
fail_nowarn:
dev_info(dev, "Failing probe (err:0x%x)\n", ret);
return ret;
}
#ifdef CONFIG_PM_SLEEP
static int cros_usbpd_charger_resume(struct device *dev)
{
struct charger_data *charger = dev_get_drvdata(dev);
int i;
if (!charger)
return 0;
for (i = 0; i < charger->num_registered_psy; i++) {
power_supply_changed(charger->ports[i]->psy);
charger->ports[i]->last_update =
jiffies - CHARGER_CACHE_UPDATE_DELAY;
}
return 0;
}
#endif
static SIMPLE_DEV_PM_OPS(cros_usbpd_charger_pm_ops, NULL,
cros_usbpd_charger_resume);
static struct platform_driver cros_usbpd_charger_driver = {
.driver = {
.name = DRV_NAME,
.pm = &cros_usbpd_charger_pm_ops,
},
.probe = cros_usbpd_charger_probe
};
module_platform_driver(cros_usbpd_charger_driver);
MODULE_LICENSE("GPL");
MODULE_DESCRIPTION("ChromeOS EC USBPD charger");
MODULE_ALIAS("platform:" DRV_NAME);
![swh spinner](/static/img/swh-spinner.gif)
Computing file changes ...