Revision dc280d93623927570da279e99393879dbbab39e7 authored by Thomas Gleixner on 21 December 2016, 19:19:49 UTC, committed by Thomas Gleixner on 25 December 2016, 09:47:42 UTC
Developers manage to overwrite states blindly without thought. That's fatal and hard to debug. Add sanity checks to make it fail. This requries to restructure the code so that the dynamic state allocation happens in the same lock protected section as the actual store. Otherwise the previous assignment of 'Reserved' to the name field would trigger the overwrite check. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sebastian Siewior <bigeasy@linutronix.de> Link: http://lkml.kernel.org/r/20161221192111.675234535@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
1 parent 59fefd0
pcwd_pci.c
/*
* Berkshire PCI-PC Watchdog Card Driver
*
* (c) Copyright 2003-2007 Wim Van Sebroeck <wim@iguana.be>.
*
* Based on source code of the following authors:
* Ken Hollis <kenji@bitgate.com>,
* Lindsay Harris <lindsay@bluegum.com>,
* Alan Cox <alan@lxorguk.ukuu.org.uk>,
* Matt Domsch <Matt_Domsch@dell.com>,
* Rob Radez <rob@osinvestor.com>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*
* Neither Wim Van Sebroeck nor Iguana vzw. admit liability nor
* provide warranty for any of this software. This material is
* provided "AS-IS" and at no charge.
*/
/*
* A bells and whistles driver is available from:
* http://www.kernel.org/pub/linux/kernel/people/wim/pcwd/pcwd_pci/
*
* More info available at
* http://www.berkprod.com/ or http://www.pcwatchdog.com/
*/
/*
* Includes, defines, variables, module parameters, ...
*/
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
#include <linux/module.h> /* For module specific items */
#include <linux/moduleparam.h> /* For new moduleparam's */
#include <linux/types.h> /* For standard types (like size_t) */
#include <linux/errno.h> /* For the -ENODEV/... values */
#include <linux/kernel.h> /* For printk/panic/... */
#include <linux/delay.h> /* For mdelay function */
#include <linux/miscdevice.h> /* For struct miscdevice */
#include <linux/watchdog.h> /* For the watchdog specific items */
#include <linux/notifier.h> /* For notifier support */
#include <linux/reboot.h> /* For reboot_notifier stuff */
#include <linux/init.h> /* For __init/__exit/... */
#include <linux/fs.h> /* For file operations */
#include <linux/pci.h> /* For pci functions */
#include <linux/ioport.h> /* For io-port access */
#include <linux/spinlock.h> /* For spin_lock/spin_unlock/... */
#include <linux/uaccess.h> /* For copy_to_user/put_user/... */
#include <linux/io.h> /* For inb/outb/... */
/* Module and version information */
#define WATCHDOG_VERSION "1.03"
#define WATCHDOG_DRIVER_NAME "PCI-PC Watchdog"
#define WATCHDOG_NAME "pcwd_pci"
#define DRIVER_VERSION WATCHDOG_DRIVER_NAME " driver, v" WATCHDOG_VERSION
/* Stuff for the PCI ID's */
#ifndef PCI_VENDOR_ID_QUICKLOGIC
#define PCI_VENDOR_ID_QUICKLOGIC 0x11e3
#endif
#ifndef PCI_DEVICE_ID_WATCHDOG_PCIPCWD
#define PCI_DEVICE_ID_WATCHDOG_PCIPCWD 0x5030
#endif
/*
* These are the defines that describe the control status bits for the
* PCI-PC Watchdog card.
*/
/* Port 1 : Control Status #1 */
#define WD_PCI_WTRP 0x01 /* Watchdog Trip status */
#define WD_PCI_HRBT 0x02 /* Watchdog Heartbeat */
#define WD_PCI_TTRP 0x04 /* Temperature Trip status */
#define WD_PCI_RL2A 0x08 /* Relay 2 Active */
#define WD_PCI_RL1A 0x10 /* Relay 1 Active */
#define WD_PCI_R2DS 0x40 /* Relay 2 Disable Temperature-trip /
reset */
#define WD_PCI_RLY2 0x80 /* Activate Relay 2 on the board */
/* Port 2 : Control Status #2 */
#define WD_PCI_WDIS 0x10 /* Watchdog Disable */
#define WD_PCI_ENTP 0x20 /* Enable Temperature Trip Reset */
#define WD_PCI_WRSP 0x40 /* Watchdog wrote response */
#define WD_PCI_PCMD 0x80 /* PC has sent command */
/* according to documentation max. time to process a command for the pci
* watchdog card is 100 ms, so we give it 150 ms to do it's job */
#define PCI_COMMAND_TIMEOUT 150
/* Watchdog's internal commands */
#define CMD_GET_STATUS 0x04
#define CMD_GET_FIRMWARE_VERSION 0x08
#define CMD_READ_WATCHDOG_TIMEOUT 0x18
#define CMD_WRITE_WATCHDOG_TIMEOUT 0x19
#define CMD_GET_CLEAR_RESET_COUNT 0x84
/* Watchdog's Dip Switch heartbeat values */
static const int heartbeat_tbl[] = {
5, /* OFF-OFF-OFF = 5 Sec */
10, /* OFF-OFF-ON = 10 Sec */
30, /* OFF-ON-OFF = 30 Sec */
60, /* OFF-ON-ON = 1 Min */
300, /* ON-OFF-OFF = 5 Min */
600, /* ON-OFF-ON = 10 Min */
1800, /* ON-ON-OFF = 30 Min */
3600, /* ON-ON-ON = 1 hour */
};
/* We can only use 1 card due to the /dev/watchdog restriction */
static int cards_found;
/* internal variables */
static int temp_panic;
static unsigned long is_active;
static char expect_release;
/* this is private data for each PCI-PC watchdog card */
static struct {
/* Wether or not the card has a temperature device */
int supports_temp;
/* The card's boot status */
int boot_status;
/* The cards I/O address */
unsigned long io_addr;
/* the lock for io operations */
spinlock_t io_lock;
/* the PCI-device */
struct pci_dev *pdev;
} pcipcwd_private;
/* module parameters */
#define QUIET 0 /* Default */
#define VERBOSE 1 /* Verbose */
#define DEBUG 2 /* print fancy stuff too */
static int debug = QUIET;
module_param(debug, int, 0);
MODULE_PARM_DESC(debug, "Debug level: 0=Quiet, 1=Verbose, 2=Debug (default=0)");
#define WATCHDOG_HEARTBEAT 0 /* default heartbeat =
delay-time from dip-switches */
static int heartbeat = WATCHDOG_HEARTBEAT;
module_param(heartbeat, int, 0);
MODULE_PARM_DESC(heartbeat, "Watchdog heartbeat in seconds. "
"(0<heartbeat<65536 or 0=delay-time from dip-switches, default="
__MODULE_STRING(WATCHDOG_HEARTBEAT) ")");
static bool nowayout = WATCHDOG_NOWAYOUT;
module_param(nowayout, bool, 0);
MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default="
__MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
/*
* Internal functions
*/
static int send_command(int cmd, int *msb, int *lsb)
{
int got_response, count;
if (debug >= DEBUG)
pr_debug("sending following data cmd=0x%02x msb=0x%02x lsb=0x%02x\n",
cmd, *msb, *lsb);
spin_lock(&pcipcwd_private.io_lock);
/* If a command requires data it should be written first.
* Data for commands with 8 bits of data should be written to port 4.
* Commands with 16 bits of data, should be written as LSB to port 4
* and MSB to port 5.
* After the required data has been written then write the command to
* port 6. */
outb_p(*lsb, pcipcwd_private.io_addr + 4);
outb_p(*msb, pcipcwd_private.io_addr + 5);
outb_p(cmd, pcipcwd_private.io_addr + 6);
/* wait till the pci card processed the command, signaled by
* the WRSP bit in port 2 and give it a max. timeout of
* PCI_COMMAND_TIMEOUT to process */
got_response = inb_p(pcipcwd_private.io_addr + 2) & WD_PCI_WRSP;
for (count = 0; (count < PCI_COMMAND_TIMEOUT) && (!got_response);
count++) {
mdelay(1);
got_response = inb_p(pcipcwd_private.io_addr + 2) & WD_PCI_WRSP;
}
if (debug >= DEBUG) {
if (got_response) {
pr_debug("time to process command was: %d ms\n",
count);
} else {
pr_debug("card did not respond on command!\n");
}
}
if (got_response) {
/* read back response */
*lsb = inb_p(pcipcwd_private.io_addr + 4);
*msb = inb_p(pcipcwd_private.io_addr + 5);
/* clear WRSP bit */
inb_p(pcipcwd_private.io_addr + 6);
if (debug >= DEBUG)
pr_debug("received following data for cmd=0x%02x: msb=0x%02x lsb=0x%02x\n",
cmd, *msb, *lsb);
}
spin_unlock(&pcipcwd_private.io_lock);
return got_response;
}
static inline void pcipcwd_check_temperature_support(void)
{
if (inb_p(pcipcwd_private.io_addr) != 0xF0)
pcipcwd_private.supports_temp = 1;
}
static int pcipcwd_get_option_switches(void)
{
int option_switches;
option_switches = inb_p(pcipcwd_private.io_addr + 3);
return option_switches;
}
static void pcipcwd_show_card_info(void)
{
int got_fw_rev, fw_rev_major, fw_rev_minor;
char fw_ver_str[20]; /* The cards firmware version */
int option_switches;
got_fw_rev = send_command(CMD_GET_FIRMWARE_VERSION, &fw_rev_major,
&fw_rev_minor);
if (got_fw_rev)
sprintf(fw_ver_str, "%u.%02u", fw_rev_major, fw_rev_minor);
else
sprintf(fw_ver_str, "<card no answer>");
/* Get switch settings */
option_switches = pcipcwd_get_option_switches();
pr_info("Found card at port 0x%04x (Firmware: %s) %s temp option\n",
(int) pcipcwd_private.io_addr, fw_ver_str,
(pcipcwd_private.supports_temp ? "with" : "without"));
pr_info("Option switches (0x%02x): Temperature Reset Enable=%s, Power On Delay=%s\n",
option_switches,
((option_switches & 0x10) ? "ON" : "OFF"),
((option_switches & 0x08) ? "ON" : "OFF"));
if (pcipcwd_private.boot_status & WDIOF_CARDRESET)
pr_info("Previous reset was caused by the Watchdog card\n");
if (pcipcwd_private.boot_status & WDIOF_OVERHEAT)
pr_info("Card sensed a CPU Overheat\n");
if (pcipcwd_private.boot_status == 0)
pr_info("No previous trip detected - Cold boot or reset\n");
}
static int pcipcwd_start(void)
{
int stat_reg;
spin_lock(&pcipcwd_private.io_lock);
outb_p(0x00, pcipcwd_private.io_addr + 3);
udelay(1000);
stat_reg = inb_p(pcipcwd_private.io_addr + 2);
spin_unlock(&pcipcwd_private.io_lock);
if (stat_reg & WD_PCI_WDIS) {
pr_err("Card timer not enabled\n");
return -1;
}
if (debug >= VERBOSE)
pr_debug("Watchdog started\n");
return 0;
}
static int pcipcwd_stop(void)
{
int stat_reg;
spin_lock(&pcipcwd_private.io_lock);
outb_p(0xA5, pcipcwd_private.io_addr + 3);
udelay(1000);
outb_p(0xA5, pcipcwd_private.io_addr + 3);
udelay(1000);
stat_reg = inb_p(pcipcwd_private.io_addr + 2);
spin_unlock(&pcipcwd_private.io_lock);
if (!(stat_reg & WD_PCI_WDIS)) {
pr_err("Card did not acknowledge disable attempt\n");
return -1;
}
if (debug >= VERBOSE)
pr_debug("Watchdog stopped\n");
return 0;
}
static int pcipcwd_keepalive(void)
{
/* Re-trigger watchdog by writing to port 0 */
spin_lock(&pcipcwd_private.io_lock);
outb_p(0x42, pcipcwd_private.io_addr); /* send out any data */
spin_unlock(&pcipcwd_private.io_lock);
if (debug >= DEBUG)
pr_debug("Watchdog keepalive signal send\n");
return 0;
}
static int pcipcwd_set_heartbeat(int t)
{
int t_msb = t / 256;
int t_lsb = t % 256;
if ((t < 0x0001) || (t > 0xFFFF))
return -EINVAL;
/* Write new heartbeat to watchdog */
send_command(CMD_WRITE_WATCHDOG_TIMEOUT, &t_msb, &t_lsb);
heartbeat = t;
if (debug >= VERBOSE)
pr_debug("New heartbeat: %d\n", heartbeat);
return 0;
}
static int pcipcwd_get_status(int *status)
{
int control_status;
*status = 0;
control_status = inb_p(pcipcwd_private.io_addr + 1);
if (control_status & WD_PCI_WTRP)
*status |= WDIOF_CARDRESET;
if (control_status & WD_PCI_TTRP) {
*status |= WDIOF_OVERHEAT;
if (temp_panic)
panic(KBUILD_MODNAME ": Temperature overheat trip!\n");
}
if (debug >= DEBUG)
pr_debug("Control Status #1: 0x%02x\n", control_status);
return 0;
}
static int pcipcwd_clear_status(void)
{
int control_status;
int msb;
int reset_counter;
if (debug >= VERBOSE)
pr_info("clearing watchdog trip status & LED\n");
control_status = inb_p(pcipcwd_private.io_addr + 1);
if (debug >= DEBUG) {
pr_debug("status was: 0x%02x\n", control_status);
pr_debug("sending: 0x%02x\n",
(control_status & WD_PCI_R2DS) | WD_PCI_WTRP);
}
/* clear trip status & LED and keep mode of relay 2 */
outb_p((control_status & WD_PCI_R2DS) | WD_PCI_WTRP,
pcipcwd_private.io_addr + 1);
/* clear reset counter */
msb = 0;
reset_counter = 0xff;
send_command(CMD_GET_CLEAR_RESET_COUNT, &msb, &reset_counter);
if (debug >= DEBUG) {
pr_debug("reset count was: 0x%02x\n", reset_counter);
}
return 0;
}
static int pcipcwd_get_temperature(int *temperature)
{
*temperature = 0;
if (!pcipcwd_private.supports_temp)
return -ENODEV;
spin_lock(&pcipcwd_private.io_lock);
*temperature = inb_p(pcipcwd_private.io_addr);
spin_unlock(&pcipcwd_private.io_lock);
/*
* Convert celsius to fahrenheit, since this was
* the decided 'standard' for this return value.
*/
*temperature = (*temperature * 9 / 5) + 32;
if (debug >= DEBUG) {
pr_debug("temperature is: %d F\n", *temperature);
}
return 0;
}
static int pcipcwd_get_timeleft(int *time_left)
{
int msb;
int lsb;
/* Read the time that's left before rebooting */
/* Note: if the board is not yet armed then we will read 0xFFFF */
send_command(CMD_READ_WATCHDOG_TIMEOUT, &msb, &lsb);
*time_left = (msb << 8) + lsb;
if (debug >= VERBOSE)
pr_debug("Time left before next reboot: %d\n", *time_left);
return 0;
}
/*
* /dev/watchdog handling
*/
static ssize_t pcipcwd_write(struct file *file, const char __user *data,
size_t len, loff_t *ppos)
{
/* See if we got the magic character 'V' and reload the timer */
if (len) {
if (!nowayout) {
size_t i;
/* note: just in case someone wrote the magic character
* five months ago... */
expect_release = 0;
/* scan to see whether or not we got the
* magic character */
for (i = 0; i != len; i++) {
char c;
if (get_user(c, data + i))
return -EFAULT;
if (c == 'V')
expect_release = 42;
}
}
/* someone wrote to us, we should reload the timer */
pcipcwd_keepalive();
}
return len;
}
static long pcipcwd_ioctl(struct file *file, unsigned int cmd,
unsigned long arg)
{
void __user *argp = (void __user *)arg;
int __user *p = argp;
static const struct watchdog_info ident = {
.options = WDIOF_OVERHEAT |
WDIOF_CARDRESET |
WDIOF_KEEPALIVEPING |
WDIOF_SETTIMEOUT |
WDIOF_MAGICCLOSE,
.firmware_version = 1,
.identity = WATCHDOG_DRIVER_NAME,
};
switch (cmd) {
case WDIOC_GETSUPPORT:
return copy_to_user(argp, &ident, sizeof(ident)) ? -EFAULT : 0;
case WDIOC_GETSTATUS:
{
int status;
pcipcwd_get_status(&status);
return put_user(status, p);
}
case WDIOC_GETBOOTSTATUS:
return put_user(pcipcwd_private.boot_status, p);
case WDIOC_GETTEMP:
{
int temperature;
if (pcipcwd_get_temperature(&temperature))
return -EFAULT;
return put_user(temperature, p);
}
case WDIOC_SETOPTIONS:
{
int new_options, retval = -EINVAL;
if (get_user(new_options, p))
return -EFAULT;
if (new_options & WDIOS_DISABLECARD) {
if (pcipcwd_stop())
return -EIO;
retval = 0;
}
if (new_options & WDIOS_ENABLECARD) {
if (pcipcwd_start())
return -EIO;
retval = 0;
}
if (new_options & WDIOS_TEMPPANIC) {
temp_panic = 1;
retval = 0;
}
return retval;
}
case WDIOC_KEEPALIVE:
pcipcwd_keepalive();
return 0;
case WDIOC_SETTIMEOUT:
{
int new_heartbeat;
if (get_user(new_heartbeat, p))
return -EFAULT;
if (pcipcwd_set_heartbeat(new_heartbeat))
return -EINVAL;
pcipcwd_keepalive();
/* Fall */
}
case WDIOC_GETTIMEOUT:
return put_user(heartbeat, p);
case WDIOC_GETTIMELEFT:
{
int time_left;
if (pcipcwd_get_timeleft(&time_left))
return -EFAULT;
return put_user(time_left, p);
}
default:
return -ENOTTY;
}
}
static int pcipcwd_open(struct inode *inode, struct file *file)
{
/* /dev/watchdog can only be opened once */
if (test_and_set_bit(0, &is_active)) {
if (debug >= VERBOSE)
pr_err("Attempt to open already opened device\n");
return -EBUSY;
}
/* Activate */
pcipcwd_start();
pcipcwd_keepalive();
return nonseekable_open(inode, file);
}
static int pcipcwd_release(struct inode *inode, struct file *file)
{
/*
* Shut off the timer.
*/
if (expect_release == 42) {
pcipcwd_stop();
} else {
pr_crit("Unexpected close, not stopping watchdog!\n");
pcipcwd_keepalive();
}
expect_release = 0;
clear_bit(0, &is_active);
return 0;
}
/*
* /dev/temperature handling
*/
static ssize_t pcipcwd_temp_read(struct file *file, char __user *data,
size_t len, loff_t *ppos)
{
int temperature;
if (pcipcwd_get_temperature(&temperature))
return -EFAULT;
if (copy_to_user(data, &temperature, 1))
return -EFAULT;
return 1;
}
static int pcipcwd_temp_open(struct inode *inode, struct file *file)
{
if (!pcipcwd_private.supports_temp)
return -ENODEV;
return nonseekable_open(inode, file);
}
static int pcipcwd_temp_release(struct inode *inode, struct file *file)
{
return 0;
}
/*
* Notify system
*/
static int pcipcwd_notify_sys(struct notifier_block *this, unsigned long code,
void *unused)
{
if (code == SYS_DOWN || code == SYS_HALT)
pcipcwd_stop(); /* Turn the WDT off */
return NOTIFY_DONE;
}
/*
* Kernel Interfaces
*/
static const struct file_operations pcipcwd_fops = {
.owner = THIS_MODULE,
.llseek = no_llseek,
.write = pcipcwd_write,
.unlocked_ioctl = pcipcwd_ioctl,
.open = pcipcwd_open,
.release = pcipcwd_release,
};
static struct miscdevice pcipcwd_miscdev = {
.minor = WATCHDOG_MINOR,
.name = "watchdog",
.fops = &pcipcwd_fops,
};
static const struct file_operations pcipcwd_temp_fops = {
.owner = THIS_MODULE,
.llseek = no_llseek,
.read = pcipcwd_temp_read,
.open = pcipcwd_temp_open,
.release = pcipcwd_temp_release,
};
static struct miscdevice pcipcwd_temp_miscdev = {
.minor = TEMP_MINOR,
.name = "temperature",
.fops = &pcipcwd_temp_fops,
};
static struct notifier_block pcipcwd_notifier = {
.notifier_call = pcipcwd_notify_sys,
};
/*
* Init & exit routines
*/
static int pcipcwd_card_init(struct pci_dev *pdev,
const struct pci_device_id *ent)
{
int ret = -EIO;
cards_found++;
if (cards_found == 1)
pr_info("%s\n", DRIVER_VERSION);
if (cards_found > 1) {
pr_err("This driver only supports 1 device\n");
return -ENODEV;
}
if (pci_enable_device(pdev)) {
pr_err("Not possible to enable PCI Device\n");
return -ENODEV;
}
if (pci_resource_start(pdev, 0) == 0x0000) {
pr_err("No I/O-Address for card detected\n");
ret = -ENODEV;
goto err_out_disable_device;
}
spin_lock_init(&pcipcwd_private.io_lock);
pcipcwd_private.pdev = pdev;
pcipcwd_private.io_addr = pci_resource_start(pdev, 0);
if (pci_request_regions(pdev, WATCHDOG_NAME)) {
pr_err("I/O address 0x%04x already in use\n",
(int) pcipcwd_private.io_addr);
ret = -EIO;
goto err_out_disable_device;
}
/* get the boot_status */
pcipcwd_get_status(&pcipcwd_private.boot_status);
/* clear the "card caused reboot" flag */
pcipcwd_clear_status();
/* disable card */
pcipcwd_stop();
/* Check whether or not the card supports the temperature device */
pcipcwd_check_temperature_support();
/* Show info about the card itself */
pcipcwd_show_card_info();
/* If heartbeat = 0 then we use the heartbeat from the dip-switches */
if (heartbeat == 0)
heartbeat =
heartbeat_tbl[(pcipcwd_get_option_switches() & 0x07)];
/* Check that the heartbeat value is within it's range ;
* if not reset to the default */
if (pcipcwd_set_heartbeat(heartbeat)) {
pcipcwd_set_heartbeat(WATCHDOG_HEARTBEAT);
pr_info("heartbeat value must be 0<heartbeat<65536, using %d\n",
WATCHDOG_HEARTBEAT);
}
ret = register_reboot_notifier(&pcipcwd_notifier);
if (ret != 0) {
pr_err("cannot register reboot notifier (err=%d)\n", ret);
goto err_out_release_region;
}
if (pcipcwd_private.supports_temp) {
ret = misc_register(&pcipcwd_temp_miscdev);
if (ret != 0) {
pr_err("cannot register miscdev on minor=%d (err=%d)\n",
TEMP_MINOR, ret);
goto err_out_unregister_reboot;
}
}
ret = misc_register(&pcipcwd_miscdev);
if (ret != 0) {
pr_err("cannot register miscdev on minor=%d (err=%d)\n",
WATCHDOG_MINOR, ret);
goto err_out_misc_deregister;
}
pr_info("initialized. heartbeat=%d sec (nowayout=%d)\n",
heartbeat, nowayout);
return 0;
err_out_misc_deregister:
if (pcipcwd_private.supports_temp)
misc_deregister(&pcipcwd_temp_miscdev);
err_out_unregister_reboot:
unregister_reboot_notifier(&pcipcwd_notifier);
err_out_release_region:
pci_release_regions(pdev);
err_out_disable_device:
pci_disable_device(pdev);
return ret;
}
static void pcipcwd_card_exit(struct pci_dev *pdev)
{
/* Stop the timer before we leave */
if (!nowayout)
pcipcwd_stop();
/* Deregister */
misc_deregister(&pcipcwd_miscdev);
if (pcipcwd_private.supports_temp)
misc_deregister(&pcipcwd_temp_miscdev);
unregister_reboot_notifier(&pcipcwd_notifier);
pci_release_regions(pdev);
pci_disable_device(pdev);
cards_found--;
}
static const struct pci_device_id pcipcwd_pci_tbl[] = {
{ PCI_VENDOR_ID_QUICKLOGIC, PCI_DEVICE_ID_WATCHDOG_PCIPCWD,
PCI_ANY_ID, PCI_ANY_ID, },
{ 0 }, /* End of list */
};
MODULE_DEVICE_TABLE(pci, pcipcwd_pci_tbl);
static struct pci_driver pcipcwd_driver = {
.name = WATCHDOG_NAME,
.id_table = pcipcwd_pci_tbl,
.probe = pcipcwd_card_init,
.remove = pcipcwd_card_exit,
};
module_pci_driver(pcipcwd_driver);
MODULE_AUTHOR("Wim Van Sebroeck <wim@iguana.be>");
MODULE_DESCRIPTION("Berkshire PCI-PC Watchdog driver");
MODULE_LICENSE("GPL");
![swh spinner](/static/img/swh-spinner.gif)
Computing file changes ...