Revision dccd9ecc374462e5d6a5b8f8110415a86c2213d8 authored by David S. Miller on 11 May 2012, 02:16:32 UTC, committed by David S. Miller on 11 May 2012, 02:16:32 UTC
Due to RCU lookups and RCU based release, fib_info objects can be found during lookup which have fi->fib_dead set. We must ignore these entries, otherwise we risk dereferencing the parts of the entry which are being torn down. Reported-by: Yevgen Pronenko <yevgen.pronenko@sonymobile.com> Signed-off-by: David S. Miller <davem@davemloft.net>
1 parent 0e0c551
i2c-parport.h
/* ------------------------------------------------------------------------ *
* i2c-parport.h I2C bus over parallel port *
* ------------------------------------------------------------------------ *
Copyright (C) 2003-2010 Jean Delvare <khali@linux-fr.org>
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
* ------------------------------------------------------------------------ */
#define PORT_DATA 0
#define PORT_STAT 1
#define PORT_CTRL 2
struct lineop {
u8 val;
u8 port;
u8 inverted;
};
struct adapter_parm {
struct lineop setsda;
struct lineop setscl;
struct lineop getsda;
struct lineop getscl;
struct lineop init;
unsigned int smbus_alert:1;
};
static const struct adapter_parm adapter_parm[] = {
/* type 0: Philips adapter */
{
.setsda = { 0x80, PORT_DATA, 1 },
.setscl = { 0x08, PORT_CTRL, 0 },
.getsda = { 0x80, PORT_STAT, 0 },
.getscl = { 0x08, PORT_STAT, 0 },
},
/* type 1: home brew teletext adapter */
{
.setsda = { 0x02, PORT_DATA, 0 },
.setscl = { 0x01, PORT_DATA, 0 },
.getsda = { 0x80, PORT_STAT, 1 },
},
/* type 2: Velleman K8000 adapter */
{
.setsda = { 0x02, PORT_CTRL, 1 },
.setscl = { 0x08, PORT_CTRL, 1 },
.getsda = { 0x10, PORT_STAT, 0 },
},
/* type 3: ELV adapter */
{
.setsda = { 0x02, PORT_DATA, 1 },
.setscl = { 0x01, PORT_DATA, 1 },
.getsda = { 0x40, PORT_STAT, 1 },
.getscl = { 0x08, PORT_STAT, 1 },
},
/* type 4: ADM1032 evaluation board */
{
.setsda = { 0x02, PORT_DATA, 1 },
.setscl = { 0x01, PORT_DATA, 1 },
.getsda = { 0x10, PORT_STAT, 1 },
.init = { 0xf0, PORT_DATA, 0 },
.smbus_alert = 1,
},
/* type 5: ADM1025, ADM1030 and ADM1031 evaluation boards */
{
.setsda = { 0x02, PORT_DATA, 1 },
.setscl = { 0x01, PORT_DATA, 1 },
.getsda = { 0x10, PORT_STAT, 1 },
},
/* type 6: Barco LPT->DVI (K5800236) adapter */
{
.setsda = { 0x02, PORT_DATA, 1 },
.setscl = { 0x01, PORT_DATA, 1 },
.getsda = { 0x20, PORT_STAT, 0 },
.getscl = { 0x40, PORT_STAT, 0 },
.init = { 0xfc, PORT_DATA, 0 },
},
/* type 7: One For All JP1 parallel port adapter */
{
.setsda = { 0x01, PORT_DATA, 0 },
.setscl = { 0x02, PORT_DATA, 0 },
.getsda = { 0x80, PORT_STAT, 1 },
.init = { 0x04, PORT_DATA, 1 },
},
};
static int type = -1;
module_param(type, int, 0);
MODULE_PARM_DESC(type,
"Type of adapter:\n"
" 0 = Philips adapter\n"
" 1 = home brew teletext adapter\n"
" 2 = Velleman K8000 adapter\n"
" 3 = ELV adapter\n"
" 4 = ADM1032 evaluation board\n"
" 5 = ADM1025, ADM1030 and ADM1031 evaluation boards\n"
" 6 = Barco LPT->DVI (K5800236) adapter\n"
" 7 = One For All JP1 parallel port adapter\n"
);
![swh spinner](/static/img/swh-spinner.gif)
Computing file changes ...