Revision de5604231ce4bc8db1bc1dcd27d8540cbedf1518 authored by Nick Piggin on 01 February 2010, 11:24:18 UTC, committed by Linus Torvalds on 02 February 2010, 20:50:47 UTC
RCU list walking of the per-cpu vmap cache was broken. It did not use RCU primitives, and also the union of free_list and rcu_head is obviously wrong (because free_list is indeed the list we are RCU walking). While we are there, remove a couple of unused fields from an earlier iteration. These APIs aren't actually used anywhere, because of problems with the XFS conversion. Christoph has now verified that the problems are solved with these patches. Also it is an exported interface, so I think it will be good to be merged now (and Christoph wants to get the XFS changes into their local tree). Cc: stable@kernel.org Cc: linux-mm@kvack.org Tested-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Nick Piggin <npiggin@suse.de> -- Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
1 parent 489b24f
mv_cesa.h
#ifndef __MV_CRYPTO_H__
#define DIGEST_INITIAL_VAL_A 0xdd00
#define DES_CMD_REG 0xdd58
#define SEC_ACCEL_CMD 0xde00
#define SEC_CMD_EN_SEC_ACCL0 (1 << 0)
#define SEC_CMD_EN_SEC_ACCL1 (1 << 1)
#define SEC_CMD_DISABLE_SEC (1 << 2)
#define SEC_ACCEL_DESC_P0 0xde04
#define SEC_DESC_P0_PTR(x) (x)
#define SEC_ACCEL_DESC_P1 0xde14
#define SEC_DESC_P1_PTR(x) (x)
#define SEC_ACCEL_CFG 0xde08
#define SEC_CFG_STOP_DIG_ERR (1 << 0)
#define SEC_CFG_CH0_W_IDMA (1 << 7)
#define SEC_CFG_CH1_W_IDMA (1 << 8)
#define SEC_CFG_ACT_CH0_IDMA (1 << 9)
#define SEC_CFG_ACT_CH1_IDMA (1 << 10)
#define SEC_ACCEL_STATUS 0xde0c
#define SEC_ST_ACT_0 (1 << 0)
#define SEC_ST_ACT_1 (1 << 1)
/*
* FPGA_INT_STATUS looks like a FPGA leftover and is documented only in Errata
* 4.12. It looks like that it was part of an IRQ-controller in FPGA and
* someone forgot to remove it while switching to the core and moving to
* SEC_ACCEL_INT_STATUS.
*/
#define FPGA_INT_STATUS 0xdd68
#define SEC_ACCEL_INT_STATUS 0xde20
#define SEC_INT_AUTH_DONE (1 << 0)
#define SEC_INT_DES_E_DONE (1 << 1)
#define SEC_INT_AES_E_DONE (1 << 2)
#define SEC_INT_AES_D_DONE (1 << 3)
#define SEC_INT_ENC_DONE (1 << 4)
#define SEC_INT_ACCEL0_DONE (1 << 5)
#define SEC_INT_ACCEL1_DONE (1 << 6)
#define SEC_INT_ACC0_IDMA_DONE (1 << 7)
#define SEC_INT_ACC1_IDMA_DONE (1 << 8)
#define SEC_ACCEL_INT_MASK 0xde24
#define AES_KEY_LEN (8 * 4)
struct sec_accel_config {
u32 config;
#define CFG_OP_MAC_ONLY 0
#define CFG_OP_CRYPT_ONLY 1
#define CFG_OP_MAC_CRYPT 2
#define CFG_OP_CRYPT_MAC 3
#define CFG_MACM_MD5 (4 << 4)
#define CFG_MACM_SHA1 (5 << 4)
#define CFG_MACM_HMAC_MD5 (6 << 4)
#define CFG_MACM_HMAC_SHA1 (7 << 4)
#define CFG_ENCM_DES (1 << 8)
#define CFG_ENCM_3DES (2 << 8)
#define CFG_ENCM_AES (3 << 8)
#define CFG_DIR_ENC (0 << 12)
#define CFG_DIR_DEC (1 << 12)
#define CFG_ENC_MODE_ECB (0 << 16)
#define CFG_ENC_MODE_CBC (1 << 16)
#define CFG_3DES_EEE (0 << 20)
#define CFG_3DES_EDE (1 << 20)
#define CFG_AES_LEN_128 (0 << 24)
#define CFG_AES_LEN_192 (1 << 24)
#define CFG_AES_LEN_256 (2 << 24)
u32 enc_p;
#define ENC_P_SRC(x) (x)
#define ENC_P_DST(x) ((x) << 16)
u32 enc_len;
#define ENC_LEN(x) (x)
u32 enc_key_p;
#define ENC_KEY_P(x) (x)
u32 enc_iv;
#define ENC_IV_POINT(x) ((x) << 0)
#define ENC_IV_BUF_POINT(x) ((x) << 16)
u32 mac_src_p;
#define MAC_SRC_DATA_P(x) (x)
#define MAC_SRC_TOTAL_LEN(x) ((x) << 16)
u32 mac_digest;
u32 mac_iv;
}__attribute__ ((packed));
/*
* /-----------\ 0
* | ACCEL CFG | 4 * 8
* |-----------| 0x20
* | CRYPT KEY | 8 * 4
* |-----------| 0x40
* | IV IN | 4 * 4
* |-----------| 0x40 (inplace)
* | IV BUF | 4 * 4
* |-----------| 0x50
* | DATA IN | 16 * x (max ->max_req_size)
* |-----------| 0x50 (inplace operation)
* | DATA OUT | 16 * x (max ->max_req_size)
* \-----------/ SRAM size
*/
#define SRAM_CONFIG 0x00
#define SRAM_DATA_KEY_P 0x20
#define SRAM_DATA_IV 0x40
#define SRAM_DATA_IV_BUF 0x40
#define SRAM_DATA_IN_START 0x50
#define SRAM_DATA_OUT_START 0x50
#define SRAM_CFG_SPACE 0x50
#endif
![swh spinner](/static/img/swh-spinner.gif)
Computing file changes ...