Revision df88912a2165f56a7402db80126cf8ea075221fe authored by Andrew Morton on 20 May 2006, 22:00:01 UTC, committed by Linus Torvalds on 21 May 2006, 19:59:17 UTC
Bernd Schmidt points out that binfmt_flat is now leaving the exec file open while the application runs. This offsets all the application's fd numbers. We should have closed the file within exec(), not at exit()-time. But there doesn't seem to be a lot of point in doing all this just to avoid going over RLIMIT_NOFILE by one fd for a few microseconds. So take the EMFILE checking out again. This will cause binfmt_flat to again fail LTP's exec-should-return-EMFILE-when-fdtable-is-full test. That test appears to be wrong anyway - Open Group specs say nothing about exec() returning EMFILE. Cc: Bernd Schmidt <bernd.schmidt@analog.com> Cc: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
1 parent 48d7055
Makefile
#
# This file is subject to the terms and conditions of the GNU General Public
# License. See the file "COPYING" in the main directory of this archive
# for more details.
#
# Copyright (C) 1994, 95, 96, 2003 by Ralf Baechle
# DECStation modifications by Paul M. Antoine, 1996
# Copyright (C) 2002, 2003, 2004 Maciej W. Rozycki
#
# This file is included by the global makefile so that you can add your own
# architecture-specific flags and dependencies. Remember to do have actions
# for "archclean" cleaning up for this architecture.
#
cflags-y :=
#
# Select the object file format to substitute into the linker script.
#
ifdef CONFIG_CPU_LITTLE_ENDIAN
32bit-tool-prefix = mipsel-linux-
64bit-tool-prefix = mips64el-linux-
32bit-bfd = elf32-tradlittlemips
64bit-bfd = elf64-tradlittlemips
32bit-emul = elf32ltsmip
64bit-emul = elf64ltsmip
else
32bit-tool-prefix = mips-linux-
64bit-tool-prefix = mips64-linux-
32bit-bfd = elf32-tradbigmips
64bit-bfd = elf64-tradbigmips
32bit-emul = elf32btsmip
64bit-emul = elf64btsmip
endif
ifdef CONFIG_32BIT
tool-prefix = $(32bit-tool-prefix)
UTS_MACHINE := mips
endif
ifdef CONFIG_64BIT
tool-prefix = $(64bit-tool-prefix)
UTS_MACHINE := mips64
endif
ifdef CONFIG_CROSSCOMPILE
CROSS_COMPILE := $(tool-prefix)
endif
ifdef CONFIG_32BIT
ld-emul = $(32bit-emul)
vmlinux-32 = vmlinux
vmlinux-64 = vmlinux.64
cflags-y += -mabi=32
endif
ifdef CONFIG_64BIT
ld-emul = $(64bit-emul)
vmlinux-32 = vmlinux.32
vmlinux-64 = vmlinux
cflags-y += -mabi=64
ifdef CONFIG_BUILD_ELF64
cflags-y += $(call cc-option,-mno-explicit-relocs)
else
cflags-y += $(call cc-option,-msym32)
endif
endif
#
# GCC uses -G 0 -mabicalls -fpic as default. We don't want PIC in the kernel
# code since it only slows down the whole thing. At some point we might make
# use of global pointer optimizations but their use of $28 conflicts with
# the current pointer optimization.
#
# The DECStation requires an ECOFF kernel for remote booting, other MIPS
# machines may also. Since BFD is incredibly buggy with respect to
# crossformat linking we rely on the elf2ecoff tool for format conversion.
#
cflags-y += -G 0 -mno-abicalls -fno-pic -pipe
cflags-y += -msoft-float
LDFLAGS_vmlinux += -G 0 -static -n -nostdlib
MODFLAGS += -mlong-calls
#
# We explicitly add the endianness specifier if needed, this allows
# to compile kernels with a toolchain for the other endianness. We
# carefully avoid to add it redundantly because gcc 3.3/3.4 complains
# when fed the toolchain default!
#
cflags-$(CONFIG_CPU_BIG_ENDIAN) += $(shell $(CC) -dumpmachine |grep -q 'mips.*el-.*' && echo -EB -D__MIPSEB__)
cflags-$(CONFIG_CPU_LITTLE_ENDIAN) += $(shell $(CC) -dumpmachine |grep -q 'mips.*el-.*' || echo -EL -D__MIPSEL__)
cflags-$(CONFIG_SB1XXX_CORELIS) += $(call cc-option,-mno-sched-prolog) \
-fno-omit-frame-pointer
#
# CPU-dependent compiler/assembler options for optimization.
#
cflags-$(CONFIG_CPU_R3000) += -march=r3000
cflags-$(CONFIG_CPU_TX39XX) += -march=r3900
cflags-$(CONFIG_CPU_R6000) += -march=r6000 -Wa,--trap
cflags-$(CONFIG_CPU_R4300) += -march=r4300 -Wa,--trap
cflags-$(CONFIG_CPU_VR41XX) += -march=r4100 -Wa,--trap
cflags-$(CONFIG_CPU_R4X00) += -march=r4600 -Wa,--trap
cflags-$(CONFIG_CPU_TX49XX) += -march=r4600 -Wa,--trap
cflags-$(CONFIG_CPU_MIPS32_R1) += $(call cc-option,-march=mips32,-mips32 -U_MIPS_ISA -D_MIPS_ISA=_MIPS_ISA_MIPS32) \
-Wa,-mips32 -Wa,--trap
cflags-$(CONFIG_CPU_MIPS32_R2) += $(call cc-option,-march=mips32r2,-mips32r2 -U_MIPS_ISA -D_MIPS_ISA=_MIPS_ISA_MIPS32) \
-Wa,-mips32r2 -Wa,--trap
cflags-$(CONFIG_CPU_MIPS64_R1) += $(call cc-option,-march=mips64,-mips64 -U_MIPS_ISA -D_MIPS_ISA=_MIPS_ISA_MIPS64) \
-Wa,-mips64 -Wa,--trap
cflags-$(CONFIG_CPU_MIPS64_R2) += $(call cc-option,-march=mips64r2,-mips64r2 -U_MIPS_ISA -D_MIPS_ISA=_MIPS_ISA_MIPS64) \
-Wa,-mips64r2 -Wa,--trap
cflags-$(CONFIG_CPU_R5000) += -march=r5000 -Wa,--trap
cflags-$(CONFIG_CPU_R5432) += $(call cc-option,-march=r5400,-march=r5000) \
-Wa,--trap
cflags-$(CONFIG_CPU_NEVADA) += $(call cc-option,-march=rm5200,-march=r5000) \
-Wa,--trap
cflags-$(CONFIG_CPU_RM7000) += $(call cc-option,-march=rm7000,-march=r5000) \
-Wa,--trap
cflags-$(CONFIG_CPU_RM9000) += $(call cc-option,-march=rm9000,-march=r5000) \
-Wa,--trap
cflags-$(CONFIG_CPU_SB1) += $(call cc-option,-march=sb1,-march=r5000) \
-Wa,--trap
cflags-$(CONFIG_CPU_R8000) += -march=r8000 -Wa,--trap
cflags-$(CONFIG_CPU_R10000) += $(call cc-option,-march=r10000,-march=r8000) \
-Wa,--trap
ifdef CONFIG_CPU_SB1
ifdef CONFIG_SB1_PASS_1_WORKAROUNDS
MODFLAGS += -msb1-pass1-workarounds
endif
endif
#
# Firmware support
#
libs-$(CONFIG_ARC) += arch/mips/arc/
libs-$(CONFIG_SIBYTE_CFE) += arch/mips/sibyte/cfe/
#
# Board-dependent options and extra files
#
#
# Acer PICA 61, Mips Magnum 4000 and Olivetti M700.
#
core-$(CONFIG_MACH_JAZZ) += arch/mips/jazz/
cflags-$(CONFIG_MACH_JAZZ) += -Iinclude/asm-mips/mach-jazz
load-$(CONFIG_MACH_JAZZ) += 0xffffffff80080000
#
# Common Alchemy Au1x00 stuff
#
core-$(CONFIG_SOC_AU1X00) += arch/mips/au1000/common/
cflags-$(CONFIG_SOC_AU1X00) += -Iinclude/asm-mips/mach-au1x00
#
# AMD Alchemy Pb1000 eval board
#
libs-$(CONFIG_MIPS_PB1000) += arch/mips/au1000/pb1000/
cflags-$(CONFIG_MIPS_PB1000) += -Iinclude/asm-mips/mach-pb1x00
load-$(CONFIG_MIPS_PB1000) += 0xffffffff80100000
#
# AMD Alchemy Pb1100 eval board
#
libs-$(CONFIG_MIPS_PB1100) += arch/mips/au1000/pb1100/
cflags-$(CONFIG_MIPS_PB1100) += -Iinclude/asm-mips/mach-pb1x00
load-$(CONFIG_MIPS_PB1100) += 0xffffffff80100000
#
# AMD Alchemy Pb1500 eval board
#
libs-$(CONFIG_MIPS_PB1500) += arch/mips/au1000/pb1500/
cflags-$(CONFIG_MIPS_PB1500) += -Iinclude/asm-mips/mach-pb1x00
load-$(CONFIG_MIPS_PB1500) += 0xffffffff80100000
#
# AMD Alchemy Pb1550 eval board
#
libs-$(CONFIG_MIPS_PB1550) += arch/mips/au1000/pb1550/
cflags-$(CONFIG_MIPS_PB1550) += -Iinclude/asm-mips/mach-pb1x00
load-$(CONFIG_MIPS_PB1550) += 0xffffffff80100000
#
# AMD Alchemy Pb1200 eval board
#
libs-$(CONFIG_MIPS_PB1200) += arch/mips/au1000/pb1200/
cflags-$(CONFIG_MIPS_PB1200) += -Iinclude/asm-mips/mach-pb1x00
load-$(CONFIG_MIPS_PB1200) += 0xffffffff80100000
#
# AMD Alchemy Db1000 eval board
#
libs-$(CONFIG_MIPS_DB1000) += arch/mips/au1000/db1x00/
cflags-$(CONFIG_MIPS_DB1000) += -Iinclude/asm-mips/mach-db1x00
load-$(CONFIG_MIPS_DB1000) += 0xffffffff80100000
#
# AMD Alchemy Db1100 eval board
#
libs-$(CONFIG_MIPS_DB1100) += arch/mips/au1000/db1x00/
cflags-$(CONFIG_MIPS_DB1100) += -Iinclude/asm-mips/mach-db1x00
load-$(CONFIG_MIPS_DB1100) += 0xffffffff80100000
#
# AMD Alchemy Db1500 eval board
#
libs-$(CONFIG_MIPS_DB1500) += arch/mips/au1000/db1x00/
cflags-$(CONFIG_MIPS_DB1500) += -Iinclude/asm-mips/mach-db1x00
load-$(CONFIG_MIPS_DB1500) += 0xffffffff80100000
#
# AMD Alchemy Db1550 eval board
#
libs-$(CONFIG_MIPS_DB1550) += arch/mips/au1000/db1x00/
cflags-$(CONFIG_MIPS_DB1550) += -Iinclude/asm-mips/mach-db1x00
load-$(CONFIG_MIPS_DB1550) += 0xffffffff80100000
#
# AMD Alchemy Db1200 eval board
#
libs-$(CONFIG_MIPS_DB1200) += arch/mips/au1000/pb1200/
cflags-$(CONFIG_MIPS_DB1200) += -Iinclude/asm-mips/mach-db1x00
load-$(CONFIG_MIPS_DB1200) += 0xffffffff80100000
#
# AMD Alchemy Bosporus eval board
#
libs-$(CONFIG_MIPS_BOSPORUS) += arch/mips/au1000/db1x00/
cflags-$(CONFIG_MIPS_BOSPORUS) += -Iinclude/asm-mips/mach-db1x00
load-$(CONFIG_MIPS_BOSPORUS) += 0xffffffff80100000
#
# AMD Alchemy Mirage eval board
#
libs-$(CONFIG_MIPS_MIRAGE) += arch/mips/au1000/db1x00/
cflags-$(CONFIG_MIPS_MIRAGE) += -Iinclude/asm-mips/mach-db1x00
load-$(CONFIG_MIPS_MIRAGE) += 0xffffffff80100000
#
# 4G-Systems eval board
#
libs-$(CONFIG_MIPS_MTX1) += arch/mips/au1000/mtx-1/
load-$(CONFIG_MIPS_MTX1) += 0xffffffff80100000
#
# MyCable eval board
#
libs-$(CONFIG_MIPS_XXS1500) += arch/mips/au1000/xxs1500/
load-$(CONFIG_MIPS_XXS1500) += 0xffffffff80100000
#
# Cobalt Server
#
core-$(CONFIG_MIPS_COBALT) += arch/mips/cobalt/
cflags-$(CONFIG_MIPS_COBALT) += -Iinclude/asm-mips/mach-cobalt
load-$(CONFIG_MIPS_COBALT) += 0xffffffff80080000
#
# DECstation family
#
core-$(CONFIG_MACH_DECSTATION) += arch/mips/dec/
cflags-$(CONFIG_MACH_DECSTATION)+= -Iinclude/asm-mips/mach-dec
libs-$(CONFIG_MACH_DECSTATION) += arch/mips/dec/prom/
load-$(CONFIG_MACH_DECSTATION) += 0xffffffff80040000
CLEAN_FILES += drivers/tc/lk201-map.c
#
# Galileo EV64120 Board
#
core-$(CONFIG_MIPS_EV64120) += arch/mips/gt64120/ev64120/
core-$(CONFIG_MIPS_EV64120) += arch/mips/gt64120/common/
cflags-$(CONFIG_MIPS_EV64120) += -Iinclude/asm-mips/mach-ev64120
load-$(CONFIG_MIPS_EV64120) += 0xffffffff80100000
#
# Galileo EV96100 Board
#
core-$(CONFIG_MIPS_EV96100) += arch/mips/galileo-boards/ev96100/
cflags-$(CONFIG_MIPS_EV96100) += -Iinclude/asm-mips/mach-ev96100
load-$(CONFIG_MIPS_EV96100) += 0xffffffff80100000
#
# Globespan IVR eval board with QED 5231 CPU
#
core-$(CONFIG_ITE_BOARD_GEN) += arch/mips/ite-boards/generic/
core-$(CONFIG_MIPS_IVR) += arch/mips/ite-boards/ivr/
load-$(CONFIG_MIPS_IVR) += 0xffffffff80100000
#
# ITE 8172 eval board with QED 5231 CPU
#
core-$(CONFIG_MIPS_ITE8172) += arch/mips/ite-boards/qed-4n-s01b/
load-$(CONFIG_MIPS_ITE8172) += 0xffffffff80100000
#
# For all MIPS, Inc. eval boards
#
core-$(CONFIG_MIPS_BOARDS_GEN) += arch/mips/mips-boards/generic/
#
# MIPS Atlas board
#
core-$(CONFIG_MIPS_ATLAS) += arch/mips/mips-boards/atlas/
cflags-$(CONFIG_MIPS_ATLAS) += -Iinclude/asm-mips/mach-atlas
cflags-$(CONFIG_MIPS_ATLAS) += -Iinclude/asm-mips/mach-mips
load-$(CONFIG_MIPS_ATLAS) += 0xffffffff80100000
#
# MIPS Malta board
#
core-$(CONFIG_MIPS_MALTA) += arch/mips/mips-boards/malta/
cflags-$(CONFIG_MIPS_MALTA) += -Iinclude/asm-mips/mach-mips
load-$(CONFIG_MIPS_MALTA) += 0xffffffff80100000
#
# MIPS SEAD board
#
core-$(CONFIG_MIPS_SEAD) += arch/mips/mips-boards/sead/
load-$(CONFIG_MIPS_SEAD) += 0xffffffff80100000
#
# MIPS SIM
#
core-$(CONFIG_MIPS_SIM) += arch/mips/mips-boards/sim/
cflags-$(CONFIG_MIPS_SIM) += -Iinclude/asm-mips/mach-sim
load-$(CONFIG_MIPS_SIM) += 0x80100000
#
# Momentum Ocelot board
#
# The Ocelot setup.o must be linked early - it does the ioremap() for the
# mips_io_port_base.
#
core-$(CONFIG_MOMENCO_OCELOT) += arch/mips/gt64120/common/ \
arch/mips/gt64120/momenco_ocelot/
cflags-$(CONFIG_MOMENCO_OCELOT) += -Iinclude/asm-mips/mach-ocelot
load-$(CONFIG_MOMENCO_OCELOT) += 0xffffffff80100000
#
# Momentum Ocelot-G board
#
# The Ocelot-G setup.o must be linked early - it does the ioremap() for the
# mips_io_port_base.
#
core-$(CONFIG_MOMENCO_OCELOT_G) += arch/mips/momentum/ocelot_g/
load-$(CONFIG_MOMENCO_OCELOT_G) += 0xffffffff80100000
#
# Momentum Ocelot-C and -CS boards
#
# The Ocelot-C[S] setup.o must be linked early - it does the ioremap() for the
# mips_io_port_base.
core-$(CONFIG_MOMENCO_OCELOT_C) += arch/mips/momentum/ocelot_c/
load-$(CONFIG_MOMENCO_OCELOT_C) += 0xffffffff80100000
#
# PMC-Sierra Yosemite
#
core-$(CONFIG_PMC_YOSEMITE) += arch/mips/pmc-sierra/yosemite/
cflags-$(CONFIG_PMC_YOSEMITE) += -Iinclude/asm-mips/mach-yosemite
load-$(CONFIG_PMC_YOSEMITE) += 0xffffffff80100000
# Qemu simulating MIPS32 4Kc
#
core-$(CONFIG_QEMU) += arch/mips/qemu/
cflags-$(CONFIG_QEMU) += -Iinclude/asm-mips/mach-qemu
load-$(CONFIG_QEMU) += 0xffffffff80010000
#
# Momentum Ocelot-3
#
core-$(CONFIG_MOMENCO_OCELOT_3) += arch/mips/momentum/ocelot_3/
cflags-$(CONFIG_MOMENCO_OCELOT_3) += -Iinclude/asm-mips/mach-ocelot3
load-$(CONFIG_MOMENCO_OCELOT_3) += 0xffffffff80100000
#
# Momentum Jaguar ATX
#
core-$(CONFIG_MOMENCO_JAGUAR_ATX) += arch/mips/momentum/jaguar_atx/
cflags-$(CONFIG_MOMENCO_JAGUAR_ATX) += -Iinclude/asm-mips/mach-ja
#ifdef CONFIG_JAGUAR_DMALOW
#load-$(CONFIG_MOMENCO_JAGUAR_ATX) += 0xffffffff88000000
#else
load-$(CONFIG_MOMENCO_JAGUAR_ATX) += 0xffffffff80100000
#endif
#
# NEC DDB
#
core-$(CONFIG_DDB5XXX_COMMON) += arch/mips/ddb5xxx/common/
#
# NEC DDB Vrc-5074
#
core-$(CONFIG_DDB5074) += arch/mips/ddb5xxx/ddb5074/
load-$(CONFIG_DDB5074) += 0xffffffff80080000
#
# NEC DDB Vrc-5476
#
core-$(CONFIG_DDB5476) += arch/mips/ddb5xxx/ddb5476/
load-$(CONFIG_DDB5476) += 0xffffffff80080000
#
# NEC DDB Vrc-5477
#
core-$(CONFIG_DDB5477) += arch/mips/ddb5xxx/ddb5477/
load-$(CONFIG_DDB5477) += 0xffffffff80100000
core-$(CONFIG_LASAT) += arch/mips/lasat/
cflags-$(CONFIG_LASAT) += -Iinclude/asm-mips/mach-lasat
load-$(CONFIG_LASAT) += 0xffffffff80000000
#
# Common VR41xx
#
core-$(CONFIG_MACH_VR41XX) += arch/mips/vr41xx/common/
cflags-$(CONFIG_MACH_VR41XX) += -Iinclude/asm-mips/mach-vr41xx
#
# NEC VR4133
#
core-$(CONFIG_NEC_CMBVR4133) += arch/mips/vr41xx/nec-cmbvr4133/
load-$(CONFIG_NEC_CMBVR4133) += 0xffffffff80100000
#
# ZAO Networks Capcella (VR4131)
#
load-$(CONFIG_ZAO_CAPCELLA) += 0xffffffff80000000
#
# Victor MP-C303/304 (VR4122)
#
load-$(CONFIG_VICTOR_MPC30X) += 0xffffffff80001000
#
# IBM WorkPad z50 (VR4121)
#
core-$(CONFIG_IBM_WORKPAD) += arch/mips/vr41xx/ibm-workpad/
load-$(CONFIG_IBM_WORKPAD) += 0xffffffff80004000
#
# CASIO CASSIPEIA E-55/65 (VR4111)
#
core-$(CONFIG_CASIO_E55) += arch/mips/vr41xx/casio-e55/
load-$(CONFIG_CASIO_E55) += 0xffffffff80004000
#
# TANBAC VR4131 multichip module(TB0225) and TANBAC VR4131DIMM(TB0229) (VR4131)
#
load-$(CONFIG_TANBAC_TB022X) += 0xffffffff80000000
#
# Common Philips PNX8550
#
core-$(CONFIG_SOC_PNX8550) += arch/mips/philips/pnx8550/common/
cflags-$(CONFIG_SOC_PNX8550) += -Iinclude/asm-mips/mach-pnx8550
#
# Philips PNX8550 JBS board
#
libs-$(CONFIG_PNX8550_JBS) += arch/mips/philips/pnx8550/jbs/
#cflags-$(CONFIG_PNX8550_JBS) += -Iinclude/asm-mips/mach-pnx8550
load-$(CONFIG_PNX8550_JBS) += 0xffffffff80060000
#
# SGI IP22 (Indy/Indigo2)
#
# Set the load address to >= 0xffffffff88069000 if you want to leave space for
# symmon, 0xffffffff80002000 for production kernels. Note that the value must
# be aligned to a multiple of the kernel stack size or the handling of the
# current variable will break so for 64-bit kernels we have to raise the start
# address by 8kb.
#
core-$(CONFIG_SGI_IP22) += arch/mips/sgi-ip22/
cflags-$(CONFIG_SGI_IP22) += -Iinclude/asm-mips/mach-ip22
ifdef CONFIG_32BIT
load-$(CONFIG_SGI_IP22) += 0xffffffff88002000
endif
ifdef CONFIG_64BIT
load-$(CONFIG_SGI_IP22) += 0xffffffff88004000
endif
#
# SGI-IP27 (Origin200/2000)
#
# Set the load address to >= 0xc000000000300000 if you want to leave space for
# symmon, 0xc00000000001c000 for production kernels. Note that the value must
# be 16kb aligned or the handling of the current variable will break.
#
ifdef CONFIG_SGI_IP27
core-$(CONFIG_SGI_IP27) += arch/mips/sgi-ip27/
cflags-$(CONFIG_SGI_IP27) += -Iinclude/asm-mips/mach-ip27
ifdef CONFIG_MAPPED_KERNEL
load-$(CONFIG_SGI_IP27) += 0xc00000004001c000
OBJCOPYFLAGS := --change-addresses=0x3fffffff80000000
dataoffset-$(CONFIG_SGI_IP27) += 0x01000000
else
load-$(CONFIG_SGI_IP27) += 0xa80000000001c000
OBJCOPYFLAGS := --change-addresses=0x57ffffff80000000
endif
endif
#
# SGI-IP32 (O2)
#
# Set the load address to >= 80069000 if you want to leave space for symmon,
# 0xffffffff80004000 for production kernels. Note that the value must be aligned to
# a multiple of the kernel stack size or the handling of the current variable
# will break.
#
core-$(CONFIG_SGI_IP32) += arch/mips/sgi-ip32/
cflags-$(CONFIG_SGI_IP32) += -Iinclude/asm-mips/mach-ip32
load-$(CONFIG_SGI_IP32) += 0xffffffff80004000
#
# Sibyte SB1250 SOC
#
# This is a LIB so that it links at the end, and initcalls are later
# the sequence; but it is built as an object so that modules don't get
# removed (as happens, even if they have __initcall/module_init)
#
core-$(CONFIG_SIBYTE_BCM112X) += arch/mips/sibyte/sb1250/
cflags-$(CONFIG_SIBYTE_BCM112X) += -Iinclude/asm-mips/mach-sibyte \
-DSIBYTE_HDR_FEATURES=SIBYTE_HDR_FMASK_1250_112x_ALL
core-$(CONFIG_SIBYTE_SB1250) += arch/mips/sibyte/sb1250/
cflags-$(CONFIG_SIBYTE_SB1250) += -Iinclude/asm-mips/mach-sibyte \
-DSIBYTE_HDR_FEATURES=SIBYTE_HDR_FMASK_1250_112x_ALL
core-$(CONFIG_SIBYTE_BCM1x55) += arch/mips/sibyte/bcm1480/
cflags-$(CONFIG_SIBYTE_BCM1x55) += -Iinclude/asm-mips/mach-sibyte \
-DSIBYTE_HDR_FEATURES=SIBYTE_HDR_FMASK_1480_ALL
core-$(CONFIG_SIBYTE_BCM1x80) += arch/mips/sibyte/bcm1480/
cflags-$(CONFIG_SIBYTE_BCM1x80) += -Iinclude/asm-mips/mach-sibyte \
-DSIBYTE_HDR_FEATURES=SIBYTE_HDR_FMASK_1480_ALL
#
# Sibyte BCM91120x (Carmel) board
# Sibyte BCM91120C (CRhine) board
# Sibyte BCM91125C (CRhone) board
# Sibyte BCM91125E (Rhone) board
# Sibyte SWARM board
# Sibyte BCM91x80 (BigSur) board
#
libs-$(CONFIG_SIBYTE_CARMEL) += arch/mips/sibyte/swarm/
load-$(CONFIG_SIBYTE_CARMEL) := 0xffffffff80100000
libs-$(CONFIG_SIBYTE_CRHINE) += arch/mips/sibyte/swarm/
load-$(CONFIG_SIBYTE_CRHINE) := 0xffffffff80100000
libs-$(CONFIG_SIBYTE_CRHONE) += arch/mips/sibyte/swarm/
load-$(CONFIG_SIBYTE_CRHONE) := 0xffffffff80100000
libs-$(CONFIG_SIBYTE_RHONE) += arch/mips/sibyte/swarm/
load-$(CONFIG_SIBYTE_RHONE) := 0xffffffff80100000
libs-$(CONFIG_SIBYTE_SENTOSA) += arch/mips/sibyte/swarm/
load-$(CONFIG_SIBYTE_SENTOSA) := 0xffffffff80100000
libs-$(CONFIG_SIBYTE_SWARM) += arch/mips/sibyte/swarm/
load-$(CONFIG_SIBYTE_SWARM) := 0xffffffff80100000
libs-$(CONFIG_SIBYTE_BIGSUR) += arch/mips/sibyte/swarm/
load-$(CONFIG_SIBYTE_BIGSUR) := 0xffffffff80100000
#
# SNI RM200 PCI
#
core-$(CONFIG_SNI_RM200_PCI) += arch/mips/sni/
cflags-$(CONFIG_SNI_RM200_PCI) += -Iinclude/asm-mips/mach-rm200
load-$(CONFIG_SNI_RM200_PCI) += 0xffffffff80600000
#
# Toshiba JMR-TX3927 board
#
core-$(CONFIG_TOSHIBA_JMR3927) += arch/mips/jmr3927/rbhma3100/ \
arch/mips/jmr3927/common/
cflags-$(CONFIG_TOSHIBA_JMR3927) += -Iinclude/asm-mips/mach-jmr3927
load-$(CONFIG_TOSHIBA_JMR3927) += 0xffffffff80050000
#
# Toshiba RBTX4927 board or
# Toshiba RBTX4937 board
#
core-$(CONFIG_TOSHIBA_RBTX4927) += arch/mips/tx4927/toshiba_rbtx4927/
core-$(CONFIG_TOSHIBA_RBTX4927) += arch/mips/tx4927/common/
load-$(CONFIG_TOSHIBA_RBTX4927) += 0xffffffff80020000
#
# Toshiba RBTX4938 board
#
core-$(CONFIG_TOSHIBA_RBTX4938) += arch/mips/tx4938/toshiba_rbtx4938/
core-$(CONFIG_TOSHIBA_RBTX4938) += arch/mips/tx4938/common/
load-$(CONFIG_TOSHIBA_RBTX4938) += 0xffffffff80100000
cflags-y += -Iinclude/asm-mips/mach-generic
drivers-$(CONFIG_PCI) += arch/mips/pci/
ifdef CONFIG_32BIT
ifdef CONFIG_CPU_LITTLE_ENDIAN
JIFFIES = jiffies_64
else
JIFFIES = jiffies_64 + 4
endif
else
JIFFIES = jiffies_64
endif
AFLAGS += $(cflags-y)
CFLAGS += $(cflags-y)
LDFLAGS += -m $(ld-emul)
ifdef CONFIG_MIPS
CHECKFLAGS += $(shell $(CC) $(CFLAGS) -dM -E -xc /dev/null | \
egrep -vw '__GNUC_(MAJOR|MINOR|PATCHLEVEL)__' | \
sed -e 's/^\#define /-D/' -e "s/ /='/" -e "s/$$/'/")
ifdef CONFIG_64BIT
CHECKFLAGS += -m64
endif
endif
OBJCOPYFLAGS += --remove-section=.reginfo
#
# Choosing incompatible machines durings configuration will result in
# error messages during linking. Select a default linkscript if
# none has been choosen above.
#
CPPFLAGS_vmlinux.lds := \
$(CFLAGS) \
-D"LOADADDR=$(load-y)" \
-D"JIFFIES=$(JIFFIES)" \
-D"DATAOFFSET=$(if $(dataoffset-y),$(dataoffset-y),0)"
head-y := arch/mips/kernel/head.o arch/mips/kernel/init_task.o
libs-y += arch/mips/lib/
libs-$(CONFIG_32BIT) += arch/mips/lib-32/
libs-$(CONFIG_64BIT) += arch/mips/lib-64/
core-y += arch/mips/kernel/ arch/mips/mm/ arch/mips/math-emu/
drivers-$(CONFIG_OPROFILE) += arch/mips/oprofile/
ifdef CONFIG_LASAT
rom.bin rom.sw: vmlinux
$(Q)$(MAKE) $(build)=arch/mips/lasat/image $@
endif
#
# Some machines like the Indy need 32-bit ELF binaries for booting purposes.
# Other need ECOFF, so we build a 32-bit ELF binary for them which we then
# convert to ECOFF using elf2ecoff.
#
vmlinux.32: vmlinux
$(OBJCOPY) -O $(32bit-bfd) $(OBJCOPYFLAGS) $< $@
#
# The 64-bit ELF tools are pretty broken so at this time we generate 64-bit
# ELF files from 32-bit files by conversion.
#
vmlinux.64: vmlinux
$(OBJCOPY) -O $(64bit-bfd) $(OBJCOPYFLAGS) $< $@
makeboot =$(Q)$(MAKE) $(build)=arch/mips/boot VMLINUX=$(vmlinux-32) $(1)
ifdef CONFIG_BOOT_ELF32
all: $(vmlinux-32)
endif
ifdef CONFIG_BOOT_ELF64
all: $(vmlinux-64)
endif
ifdef CONFIG_MIPS_ATLAS
all: vmlinux.srec
endif
ifdef CONFIG_MIPS_MALTA
all: vmlinux.srec
endif
ifdef CONFIG_MIPS_SEAD
all: vmlinux.srec
endif
ifdef CONFIG_QEMU
all: vmlinux.bin
endif
ifdef CONFIG_SNI_RM200_PCI
all: vmlinux.ecoff
endif
vmlinux.bin: $(vmlinux-32)
+@$(call makeboot,$@)
vmlinux.ecoff vmlinux.rm200: $(vmlinux-32)
+@$(call makeboot,$@)
vmlinux.srec: $(vmlinux-32)
+@$(call makeboot,$@)
CLEAN_FILES += vmlinux.ecoff \
vmlinux.srec \
vmlinux.rm200.tmp \
vmlinux.rm200
archclean:
@$(MAKE) $(clean)=arch/mips/boot
@$(MAKE) $(clean)=arch/mips/lasat
CLEAN_FILES += vmlinux.32 \
vmlinux.64 \
vmlinux.ecoff
![swh spinner](/static/img/swh-spinner.gif)
Computing file changes ...