df8d06a | Linus Torvalds | 16 May 2011, 15:55:49 UTC | Merge branch 'omap-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 * 'omap-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6: OMAP3: set the core dpll clk rate in its set_rate function omap: iommu: Return IRQ_HANDLED in fault handler when no fault occured | 16 May 2011, 15:55:49 UTC |
7c21738 | Linus Torvalds | 16 May 2011, 15:47:31 UTC | Merge branch 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6 * 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: drm: Take lock around probes for drm_fb_helper_hotplug_event drm/i915: Revert i915.semaphore=1 default from 47ae63e0 vga_switcheroo: don't toggle-switch devices drm/radeon/kms: add some evergreen/ni safe regs drm/radeon/kms: fix extended lvds info parsing drm/radeon/kms: fix tiling reg on fusion | 16 May 2011, 15:47:31 UTC |
752d263 | Chris Wilson | 22 April 2011, 10:03:57 UTC | drm: Take lock around probes for drm_fb_helper_hotplug_event We need to hold the dev->mode_config.mutex whilst detecting the output status. But we also need to drop it for the call into drm_fb_helper_single_fb_probe(), which indirectly acquires the lock when attaching the fbcon. Failure to do so exposes a race with normal output probing. Detected by adding some warnings that the mutex is held to the backend detect routines: [ 17.772456] WARNING: at drivers/gpu/drm/i915/intel_crt.c:471 intel_crt_detect+0x3e/0x373 [i915]() [ 17.772458] Hardware name: Latitude E6400 [ 17.772460] Modules linked in: .... [ 17.772582] Pid: 11, comm: kworker/0:1 Tainted: G W 2.6.38.4-custom.2 #8 [ 17.772584] Call Trace: [ 17.772591] [<ffffffff81046af5>] ? warn_slowpath_common+0x78/0x8c [ 17.772603] [<ffffffffa03f3e5c>] ? intel_crt_detect+0x3e/0x373 [i915] [ 17.772612] [<ffffffffa0355d49>] ? drm_helper_probe_single_connector_modes+0xbf/0x2af [drm_kms_helper] [ 17.772619] [<ffffffffa03534d5>] ? drm_fb_helper_probe_connector_modes+0x39/0x4d [drm_kms_helper] [ 17.772625] [<ffffffffa0354760>] ? drm_fb_helper_hotplug_event+0xa5/0xc3 [drm_kms_helper] [ 17.772633] [<ffffffffa035577f>] ? output_poll_execute+0x146/0x17c [drm_kms_helper] [ 17.772638] [<ffffffff81193c01>] ? cfq_init_queue+0x247/0x345 [ 17.772644] [<ffffffffa0355639>] ? output_poll_execute+0x0/0x17c [drm_kms_helper] [ 17.772648] [<ffffffff8105b540>] ? process_one_work+0x193/0x28e [ 17.772652] [<ffffffff8105c6bc>] ? worker_thread+0xef/0x172 [ 17.772655] [<ffffffff8105c5cd>] ? worker_thread+0x0/0x172 [ 17.772658] [<ffffffff8105c5cd>] ? worker_thread+0x0/0x172 [ 17.772663] [<ffffffff8105f767>] ? kthread+0x7a/0x82 [ 17.772668] [<ffffffff8100a724>] ? kernel_thread_helper+0x4/0x10 [ 17.772671] [<ffffffff8105f6ed>] ? kthread+0x0/0x82 [ 17.772674] [<ffffffff8100a720>] ? kernel_thread_helper+0x0/0x10 Reported-by: Frederik Himpe <fhimpe@telenet.be> References: https://bugs.freedesktop.org/show_bug.cgi?id=36394 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Dave Airlie <airlied@redhat.com> | 16 May 2011, 02:01:43 UTC |
8eea1be | Andy Lutomirski | 13 May 2011, 16:14:54 UTC | drm/i915: Revert i915.semaphore=1 default from 47ae63e0 My Q67 / i7-2600 box has rev09 Sandy Bridge graphics. It hangs instantly when GNOME loads and it hangs so hard the reset button doesn't work. Setting i915.semaphore=0 fixes it. Semaphores were disabled in a1656b9090f7008d2941c314f5a64724bea2ae37 in 2.6.38 and were re-enabled by commit 47ae63e0c2e5fdb582d471dc906eb29be94c732f Merge: c59a333 467cffb Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Mon Mar 7 12:32:44 2011 +0000 Merge branch 'drm-intel-fixes' into drm-intel-next Apply the trivial conflicting regression fixes, but keep GPU semaphores enabled. Conflicts: drivers/gpu/drm/i915/i915_drv.h drivers/gpu/drm/i915/i915_gem_execbuffer.c (It's worth noting that the offending change is i915_drv.c, which is not a conflict.) Signed-off-by: Andy Lutomirski <luto@mit.edu> Acked-by: Keith Packard <keithp@keithp.com> Signed-off-by: Dave Airlie <airlied@redhat.com> | 15 May 2011, 23:15:37 UTC |
a67b888 | Florian Mickler | 15 May 2011, 14:32:50 UTC | vga_switcheroo: don't toggle-switch devices If the requested device is already active, ignore the request. This restores the original behaviour of the interface. The change was probably an unintended side effect of commit 66b37c6777c4 vga_switcheroo: split switching into two stages which did not take into account to duplicate the !active check in the split-off stage2. Fix this by factoring that check out of stage1 into the debugfs_write routine. References: https://bugzilla.kernel.org/show_bug.cgi?id=34252 Reported-by: Igor Murzov <e-mail@date.by> Tested-by: Igor Murzov <e-mail@date.by> Signed-off-by: Florian Mickler <florian@mickler.org> Signed-off-by: Dave Airlie <airlied@redhat.com> | 15 May 2011, 22:57:04 UTC |
eed631e | Linus Torvalds | 15 May 2011, 17:22:10 UTC | Merge git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable * git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable: Btrfs: fix FS_IOC_SETFLAGS ioctl Btrfs: fix FS_IOC_GETFLAGS ioctl fs: remove FS_COW_FL Btrfs: fix easily get into ENOSPC in mixed case Prevent oopsing in posix_acl_valid() | 15 May 2011, 17:22:10 UTC |
bd1a643 | Linus Torvalds | 14 May 2011, 22:41:10 UTC | Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client: rbd: fix split bio handling rbd: fix leak of ops struct | 14 May 2011, 22:41:10 UTC |
ebcb904 | Li Zefan | 15 April 2011, 03:03:17 UTC | Btrfs: fix FS_IOC_SETFLAGS ioctl Steps to reproduce the bug: - Call FS_IOC_SETLFAGS ioctl with flags=FS_COMPR_FL - Call FS_IOC_SETFLAGS ioctl with flags=0 - Call FS_IOC_GETFLAGS ioctl, and you'll see FS_COMPR_FL is still set! Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> Signed-off-by: Chris Mason <chris.mason@oracle.com> | 14 May 2011, 20:10:28 UTC |
d0092bd | Li Zefan | 15 April 2011, 03:03:06 UTC | Btrfs: fix FS_IOC_GETFLAGS ioctl As we've added per file compression/cow support. Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> Signed-off-by: Chris Mason <chris.mason@oracle.com> | 14 May 2011, 20:10:27 UTC |
e1e8fb6 | Li Zefan | 15 April 2011, 03:02:49 UTC | fs: remove FS_COW_FL FS_COW_FL and FS_NOCOW_FL were newly introduced to control per file COW in btrfs, but FS_NOCOW_FL is sufficient. The fact is we don't have corresponding BTRFS_INODE_COW flag. COW is default, and FS_NOCOW_FL can be used to switch off COW for a single file. If we mount btrfs with nodatacow, a newly created file will be set with the FS_NOCOW_FL flag. So to turn on COW for it, we can just clear the FS_NOCOW_FL flag. Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> Signed-off-by: Chris Mason <chris.mason@oracle.com> | 14 May 2011, 20:10:26 UTC |
1aba86d | liubo | 08 April 2011, 08:44:37 UTC | Btrfs: fix easily get into ENOSPC in mixed case When a btrfs disk is created by mixed data & metadata option, it will have no pure data or pure metadata space info. In btrfs's for-linus branch, commit 78b1ea13838039cd88afdd62519b40b344d6c920 (Btrfs: fix OOPS of empty filesystem after balance) initializes space infos at the very beginning. The problem is this initialization does not take the mixed case into account, which will cause btrfs will easily get into ENOSPC in mixed case. Signed-off-by: Liu Bo <liubo2009@cn.fujitsu.com> Signed-off-by: Chris Mason <chris.mason@oracle.com> | 14 May 2011, 20:10:26 UTC |
f5de939 | Daniel J Blueman | 03 May 2011, 16:44:13 UTC | Prevent oopsing in posix_acl_valid() If posix_acl_from_xattr() returns an error code, a negative address is dereferenced causing an oops; fix by checking for error code first. Signed-off-by: Daniel J Blueman <daniel.blueman@gmail.com> Reviewed-by: Josef Bacik <josef@redhat.com> Signed-off-by: Chris Mason <chris.mason@oracle.com> | 14 May 2011, 20:10:18 UTC |
9f6bd36 | Linus Torvalds | 14 May 2011, 19:19:18 UTC | Merge branch 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev * 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev: libata: fix oops when LPM is used with PMP | 14 May 2011, 19:19:18 UTC |
05bf86b | Hugh Dickins | 14 May 2011, 19:06:42 UTC | tmpfs: fix race between swapoff and writepage Shame on me! Commit b1dea800ac39 "tmpfs: fix race between umount and writepage" fixed the advertized race, but introduced another: as even its comment makes clear, we cannot safely rely on a peek at list_empty() while holding no lock - until info->swapped is set, shmem_unuse_inode() may delete any formerly-swapped inode from the shmem_swaplist, which in this case would leave a swap area impossible to swapoff. Although I don't relish taking the mutex every time, I don't care much for the alternatives either; and at least the peek at list_empty() in shmem_evict_inode() (a hotter path since most inodes would never have been swapped) remains safe, because we already truncated the whole file. Signed-off-by: Hugh Dickins <hughd@google.com> Cc: stable@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 14 May 2011, 19:18:55 UTC |
5f6f12c | Tejun Heo | 09 May 2011, 14:04:11 UTC | libata: fix oops when LPM is used with PMP ae01b2493c (libata: Implement ATA_FLAG_NO_DIPM and apply it to mcp65) added ATA_FLAG_NO_DIPM and made ata_eh_set_lpm() check the flag. However, @ap is NULL if @link points to a PMP link and thus the unconditional @ap->flags dereference leads to the following oops. BUG: unable to handle kernel NULL pointer dereference at 0000000000000018 IP: [<ffffffff813f98e1>] ata_eh_recover+0x9a1/0x1510 ... Pid: 295, comm: scsi_eh_4 Tainted: P 2.6.38.5-core2 #1 System76, Inc. Serval Professional/Serval Professional RIP: 0010:[<ffffffff813f98e1>] [<ffffffff813f98e1>] ata_eh_recover+0x9a1/0x1510 RSP: 0018:ffff880132defbf0 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff880132f40000 RCX: 0000000000000000 RDX: ffff88013377c000 RSI: ffff880132f40000 RDI: 0000000000000000 RBP: ffff880132defce0 R08: ffff88013377dc58 R09: ffff880132defd98 R10: 0000000000000000 R11: 00000000ffffffff R12: 0000000000000000 R13: 0000000000000000 R14: ffff88013377c000 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff8800bf700000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 0000000000000018 CR3: 0000000001a03000 CR4: 00000000000406e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process scsi_eh_4 (pid: 295, threadinfo ffff880132dee000, task ffff880133b416c0) Stack: 0000000000000000 ffff880132defcc0 0000000000000000 ffff880132f42738 ffffffff813ee8f0 ffffffff813eefe0 ffff880132defd98 ffff88013377f190 ffffffffa00b3e30 ffffffff813ef030 0000000032defc60 ffff880100000000 Call Trace: [<ffffffff81400867>] sata_pmp_error_handler+0x607/0xc30 [<ffffffffa00b273f>] ahci_error_handler+0x1f/0x70 [libahci] [<ffffffff813faade>] ata_scsi_error+0x5be/0x900 [<ffffffff813cf724>] scsi_error_handler+0x124/0x650 [<ffffffff810834b6>] kthread+0x96/0xa0 [<ffffffff8100cd64>] kernel_thread_helper+0x4/0x10 Code: 8b 95 70 ff ff ff b8 00 00 00 00 48 3b 9a 10 2e 00 00 48 0f 44 c2 48 89 85 70 ff ff ff 48 8b 8d 70 ff ff ff f6 83 69 02 00 00 01 <48> 8b 41 18 0f 85 48 01 00 00 48 85 c9 74 12 48 8b 51 08 48 83 RIP [<ffffffff813f98e1>] ata_eh_recover+0x9a1/0x1510 RSP <ffff880132defbf0> CR2: 0000000000000018 Fix it by testing @link->ap->flags instead. stable: ATA_FLAG_NO_DIPM was added during 2.6.39 cycle but was backported to 2.6.37 and 38. This is a fix for that and thus also applicable to 2.6.37 and 38. Signed-off-by: Tejun Heo <tj@kernel.org> Reported-by: "Nathan A. Mourey II" <nmoureyii@ne.rr.com> LKML-Reference: <1304555277.2059.2.camel@localhost.localdomain> Cc: Connor H <cmdkhh@gmail.com> Cc: stable@kernel.org Signed-off-by: Jeff Garzik <jgarzik@pobox.com> | 14 May 2011, 18:51:40 UTC |
afa4979 | Linus Torvalds | 14 May 2011, 18:24:32 UTC | Merge branch 'fbmem' * fbmem: Further fbcon sanity checking fbmem: fix remove_conflicting_framebuffers races | 14 May 2011, 18:24:32 UTC |
22fe944 | Tejun Heo | 14 May 2011, 10:28:04 UTC | Revert "libata: ahci_start_engine compliant to AHCI spec" This reverts commit 270dac35c26433d06a89150c51e75ca0181ca7e4. The commits causes command timeouts on AC plug/unplug. It isn't yet clear why. As the commit was for a single rather obscure controller, revert the change for now. The problem was reported and bisected by Gu Rui in bug#34692. https://bugzilla.kernel.org/show_bug.cgi?id=34692 Also, reported by Rafael and Michael in the following thread. http://thread.gmane.org/gmane.linux.kernel/1138771 Signed-off-by: Tejun Heo <tj@kernel.org> Reported-by: Gu Rui <chaos.proton@gmail.com> Reported-by: Rafael J. Wysocki <rjw@sisk.pl> Reported-by: Michael Leun <lkml20100708@newton.leun.net> Cc: Jian Peng <jipeng2005@gmail.com> Cc: Jeff Garzik <jgarzik@pobox.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 14 May 2011, 17:45:59 UTC |
c590cec | Bruno Prémont | 14 May 2011, 10:24:15 UTC | Further fbcon sanity checking This moves the if (num_registered_fb == FB_MAX) return -ENXIO; check _AFTER_ the call to do_remove_conflicting_framebuffers() as this would (now in a safe way) allow a native driver to replace the conflicting one even if all slots in registered_fb[] are taken. This also prevents unregistering a framebuffer that is no longer registered (vga16f will unregister at module unload time even if the frame buffer had been unregistered earlier due to being found conflicting). Signed-off-by: Bruno Prémont <bonbons@linux-vserver.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 14 May 2011, 17:28:54 UTC |
712f314 | Linus Torvalds | 13 May 2011, 23:16:41 UTC | fbmem: fix remove_conflicting_framebuffers races When a register_framebuffer() call results in us removing old conflicting framebuffers, the new registration_lock doesn't protect that situation. And we can't just add the same locking to the function, because these functions call each other: register_framebuffer() calls remove_conflicting_framebuffers, which in turn calls unregister_framebuffer for any conflicting entry. In order to fix it, this just creates wrapper functions around all three functions and makes the versions that actually do the work be called "do_xxx()", leaving just the wrapper that gets the lock and calls the worker function. So the rule becomes simply that "do_xxxx()" has to be called with the lock held, and now do_register_framebuffer() can just call do_remove_conflicting_framebuffers(), and that in turn can call _do_unregister_framebuffer(), and there is no deadlock, and we can hold the registration lock over the whole sequence, fixing the races. It also makes error cases simpler, and fixes one situation where we would return from unregister_framebuffer() without releasing the lock, pointed out by Bruno Prémont. Tested-by: Bruno Prémont <bonbons@linux-vserver.org> Tested-by: Anca Emanuel <anca.emanuel@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 14 May 2011, 17:23:44 UTC |
ddb503b | Linus Torvalds | 14 May 2011, 00:29:03 UTC | Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mattst88/alpha-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mattst88/alpha-2.6: alpha: Wire up syscalls new to 2.6.39 alpha: convert to clocksource_register_hz | 14 May 2011, 00:29:03 UTC |
90b57f3 | Michael Cree | 04 May 2011, 08:14:50 UTC | alpha: Wire up syscalls new to 2.6.39 Wire up the syscalls: name_to_handle_at open_by_handle_at clock_adjtime syncfs and adjust some whitespace in the neighbourhood to align commments. Signed-off-by: Michael Cree <mcree@orcon.net.nz> Signed-off-by: Matt Turner <mattst88@gmail.com> | 13 May 2011, 23:16:11 UTC |
f550806 | John Stultz | 16 February 2011, 06:34:49 UTC | alpha: convert to clocksource_register_hz Converts alpha to use clocksource_register_hz. Signed-off-by: John Stultz <johnstul@us.ibm.com> CC: Richard Henderson <rth@twiddle.net> CC: Ivan Kokshaysky <ink@jurassic.park.msu.ru> CC: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Matt Turner <mattst88@gmail.com> | 13 May 2011, 23:16:10 UTC |
298eaaa | Linus Torvalds | 13 May 2011, 22:20:51 UTC | Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6 * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: bridge: fix forwarding of IPv6 bonding,llc: Fix structure sizeof incompatibility for some PDUs ipv6: restore correct ECN handling on TCP xmit ne-h8300: Fix regression caused during net_device_ops conversion hydra: Fix regression caused during net_device_ops conversion zorro8390: Fix regression caused during net_device_ops conversion sfc: Always map MCDI shared memory as uncacheable ehea: Fix memory hotplug oops libertas: fix cmdpendingq locking iwlegacy: fix IBSS mode crashes ath9k: Fix a warning due to a queued work during S3 state mac80211: don't start the dynamic ps timer if not associated | 13 May 2011, 22:20:51 UTC |
cf70cc5 | Linus Torvalds | 13 May 2011, 22:19:39 UTC | Merge branch 'bugfixes' of git://git.linux-nfs.org/projects/trondmy/nfs-2.6 * 'bugfixes' of git://git.linux-nfs.org/projects/trondmy/nfs-2.6: NFSv4.1: Ensure that layoutget uses the correct gfp modes NFSv4.1: remove pnfs_layout_hdr from pnfs_destroy_all_layouts tmp_list NFSv41: Resend on NFS4ERR_RETRY_UNCACHED_REP | 13 May 2011, 22:19:39 UTC |
1fec709 | Yehuda Sadeh | 13 May 2011, 20:52:56 UTC | rbd: fix split bio handling The rbd driver currently splits bios when they span an object boundary. However, the blk_end_request expects the completions to roll up the results in block device order, and the split rbd/ceph ops can complete in any order. This patch adds a struct rbd_req_coll to track completion of split requests and ensures that the results are passed back up to the block layer in order. This fixes errors where the file system gets completion of a read operation that spans an object boundary before the data has actually arrived. The bug is easily reproduced with iozone with a working set larger than available RAM. Reported-by: Fyodor Ustinov <ufm@ufm.su> Signed-off-by: Yehuda Sadeh <yehuda@hq.newdream.net> Signed-off-by: Sage Weil <sage@newdream.net> | 13 May 2011, 20:52:57 UTC |
cb68552 | Stephen Hemminger | 13 May 2011, 20:03:24 UTC | bridge: fix forwarding of IPv6 The commit 6b1e960fdbd75dcd9bcc3ba5ff8898ff1ad30b6e bridge: Reset IPCB when entering IP stack on NF_FORWARD broke forwarding of IPV6 packets in bridge because it would call bp_parse_ip_options with an IPV6 packet. Reported-by: Noah Meyerhans <noahm@debian.org> Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Reviewed-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 13 May 2011, 20:03:24 UTC |
087fbc9 | Andy Lutomirski | 13 May 2011, 16:14:54 UTC | drm/i915: Revert i915.semaphore=1 default from i915 merge My Q67 / i7-2600 box has rev09 Sandy Bridge graphics. It hangs instantly when GNOME loads and it hangs so hard the reset button doesn't work. Setting i915.semaphore=0 fixes it. Semaphores were disabled in a1656b9090f7 ("drm/i915: Disable GPU semaphores by default") in 2.6.38 but were then re-enabled (by mistake?) by the merge 47ae63e0c2e5 ("Merge branch 'drm-intel-fixes' into drm-intel-next"). (It's worth noting that the offending change is i915_drv.c, which was not marked as a conflict - although a 'git show --cc' on the merge does show that neither parent had it set to 1) Signed-off-by: Andy Lutomirski <luto@mit.edu> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 13 May 2011, 19:22:51 UTC |
a10e146 | Vitalii Demianets | 12 May 2011, 23:04:29 UTC | bonding,llc: Fix structure sizeof incompatibility for some PDUs With some combinations of arch/compiler (e.g. arm-linux-gcc) the sizeof operator on structure returns value greater than expected. In cases when the structure is used for mapping PDU fields it may lead to unexpected results (such as holes and alignment problems in skb data). __packed prevents this undesired behavior. Signed-off-by: Vitalii Demianets <vitas@nppfactor.kiev.ua> Signed-off-by: David S. Miller <davem@davemloft.net> | 13 May 2011, 19:13:24 UTC |
26cf46b | Linus Torvalds | 13 May 2011, 18:51:01 UTC | vfs: micro-optimize acl_permission_check() It's a hot function, and we're better off not mixing types in the mask calculations. The compiler just ends up mixing 16-bit and 32-bit operations, for no good reason. So do everything in 'unsigned int' rather than mixing 'unsigned int' masking with a 'umode_t' (16-bit) mode variable. This, together with the parent commit (47a150edc2ae: "Cache user_ns in struct cred") makes acl_permission_check() much nicer. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 13 May 2011, 18:51:01 UTC |
47a150e | Serge E. Hallyn | 13 May 2011, 03:27:54 UTC | Cache user_ns in struct cred If !CONFIG_USERNS, have current_user_ns() defined to (&init_user_ns). Get rid of _current_user_ns. This requires nsown_capable() to be defined in capability.c rather than as static inline in capability.h, so do that. Request_key needs init_user_ns defined at current_user_ns if !CONFIG_USERNS, so forward-declare that in cred.h if !CONFIG_USERNS at current_user_ns() define. Compile-tested with and without CONFIG_USERNS. Signed-off-by: Serge E. Hallyn <serge.hallyn@canonical.com> [ This makes a huge performance difference for acl_permission_check(), up to 30%. And that is one of the hottest kernel functions for loads that are pathname-lookup heavy. ] Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 13 May 2011, 18:45:33 UTC |
5fd2a84 | Avinash H.M | 09 May 2011, 12:29:40 UTC | OMAP3: set the core dpll clk rate in its set_rate function The debug l3_ick/rate is not displaying the actual rate of the clock in hardware. This is because, the core dpll set_rate function doesn't update the clk.rate. After fixing, the l3_ick/rate is displaying proper values. Signed-off-by: Shweta Gulati <shweta.gulati@ti.com> Signed-off-by: Avinash.H.M <avinashhm@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Paul Wamsley <paul@pwsan.com> Acked-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Tony Lindgren <tony@atomide.com> | 13 May 2011, 14:08:18 UTC |
3a8ab79 | Alex Deucher | 13 May 2011, 01:15:15 UTC | drm/radeon/kms: add some evergreen/ni safe regs need to programmed from the userspace drivers. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com> | 13 May 2011, 06:16:36 UTC |
05fa7ea | Alex Deucher | 11 May 2011, 18:02:07 UTC | drm/radeon/kms: fix extended lvds info parsing On rev <= 1.1 tables, the offset is absolute, on newer tables, it's relative. Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=700326 Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Reviewed-by: Jerome Glisse <jglisse@redhat.com> Cc: stable@kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com> | 13 May 2011, 06:16:33 UTC |
d9282fc | Alex Deucher | 11 May 2011, 07:15:24 UTC | drm/radeon/kms: fix tiling reg on fusion The location of MC_ARB_RAMCFG changed on fusion. I've diffed all the other regs in evergreend.h and this is the only other reg that changed. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com> | 13 May 2011, 06:15:39 UTC |
11f7700 | Sage Weil | 12 May 2011, 23:13:54 UTC | rbd: fix leak of ops struct The ops vector must be freed by the rbd_do_request caller. Signed-off-by: Sage Weil <sage@newdream.net> | 13 May 2011, 03:59:14 UTC |
381e786 | Linus Torvalds | 13 May 2011, 01:16:13 UTC | Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6: SELinux: delete debugging printks from filename_trans rule processing | 13 May 2011, 01:16:13 UTC |
446cc63 | Linus Torvalds | 13 May 2011, 01:00:09 UTC | Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ericvh/v9fs * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ericvh/v9fs: net/9p/protocol.c: Fix a memory leak | 13 May 2011, 01:00:09 UTC |
9bbd055 | Linus Torvalds | 12 May 2011, 23:55:33 UTC | Merge branch 'for-2639-rc7/i2c-fixes' of git://git.fluff.org/bjdooks/linux * 'for-2639-rc7/i2c-fixes' of git://git.fluff.org/bjdooks/linux: i2c: pnx: Fix crash due to wrong init of timer->data | 12 May 2011, 23:55:33 UTC |
ca7d120 | James Morris | 12 May 2011, 23:52:16 UTC | Merge branch 'for-linus' of git://git.infradead.org/users/eparis/selinux into for-linus | 12 May 2011, 23:52:16 UTC |
9ddabb0 | Wolfram Sang | 29 April 2011, 13:30:02 UTC | i2c: pnx: Fix crash due to wrong init of timer->data alg_data is already a pointer which must be passed directly. Reported-by: Dieter Ripp <ripp@systecnet.com> Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Cc: Russell King <linux@arm.linux.org.uk> Cc: Ben Dooks <ben-i2c@fluff.org> Signed-off-by: Ben Dooks <ben-linux@fluff.org> | 12 May 2011, 23:10:36 UTC |
ca06707 | Steinar H. Gunderson | 06 May 2011, 23:44:46 UTC | ipv6: restore correct ECN handling on TCP xmit Since commit e9df2e8fd8fbc9 (Use appropriate sock tclass setting for routing lookup) we lost ability to properly add ECN codemarks to ipv6 TCP frames. It seems like TCP_ECN_send() calls INET_ECN_xmit(), which only sets the ECN bit in the IPv4 ToS field (inet_sk(sk)->tos), but after the patch, what's checked is inet6_sk(sk)->tclass, which is a completely different field. Close bug https://bugzilla.kernel.org/show_bug.cgi?id=34322 [Eric Dumazet] : added the INET_ECN_dontxmit() fix and replace macros by inline functions for clarity. Signed-off-by: Steinar H. Gunderson <sgunderson@bigfoot.com> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Cc: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net> | 12 May 2011, 22:52:14 UTC |
411f05f | Ingo Molnar | 12 May 2011, 21:00:28 UTC | vsprintf: Turn kptr_restrict off by default kptr_restrict has been triggering bugs in apps such as perf, and it also makes the system less useful by default, so turn it off by default. This is how we generally handle security features that remove functionality, such as firewall code or SELinux - they have to be configured and activated from user-space. Distributions can turn kptr_restrict on again via this line in /etc/sysctrl.conf: kernel.kptr_restrict = 1 ( Also mark the variable __read_mostly while at it, as it's typically modified only once per bootup, or not at all. ) Signed-off-by: Ingo Molnar <mingo@elte.hu> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 12 May 2011, 22:18:16 UTC |
1b0bcbc | Pedro Scarapicchia Junior | 09 May 2011, 14:10:49 UTC | net/9p/protocol.c: Fix a memory leak When p9pdu_readf() is called with "s" attribute, it allocates a pointer that will store a string. In p9dirent_read(), this pointer is not being released, leading to out of memory errors. This patch releases this pointer after string is copyed to dirent->d_name. Signed-off-by: Pedro Scarapicchia Junior <pedro.scarapiccha@br.flextronics.com> Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com> | 12 May 2011, 22:05:37 UTC |
2592a73 | Geert Uytterhoeven | 12 May 2011, 09:11:40 UTC | ne-h8300: Fix regression caused during net_device_ops conversion Changeset dcd39c90290297f6e6ed8a04bb20da7ac2b043c5 ("ne-h8300: convert to net_device_ops") broke ne-h8300 by adding 8390.o to the link. That meant that lib8390.c was included twice, once in ne-h8300.c and once in 8390.c, subject to different macros. This patch reverts that by avoiding the wrappers in 8390.c. Fix based on commits 217cbfa856dc1cbc2890781626c4032d9e3ec59f ("mac8390: fix regression caused during net_device_ops conversion") and 4e0168fa4842e27795a75b205a510f25b62181d9 ("mac8390: fix build with NET_POLL_CONTROLLER"). Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: stable@kernel.org Signed-off-by: David S. Miller <davem@davemloft.net> | 12 May 2011, 20:59:57 UTC |
0b25e01 | Geert Uytterhoeven | 12 May 2011, 09:11:39 UTC | hydra: Fix regression caused during net_device_ops conversion Changeset 5618f0d1193d6b051da9b59b0e32ad24397f06a4 ("hydra: convert to net_device_ops") broke hydra by adding 8390.o to the link. That meant that lib8390.c was included twice, once in hydra.c and once in 8390.c, subject to different macros. This patch reverts that by avoiding the wrappers in 8390.c. Fix based on commits 217cbfa856dc1cbc2890781626c4032d9e3ec59f ("mac8390: fix regression caused during net_device_ops conversion") and 4e0168fa4842e27795a75b205a510f25b62181d9 ("mac8390: fix build with NET_POLL_CONTROLLER"). Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: stable@kernel.org Signed-off-by: David S. Miller <davem@davemloft.net> | 12 May 2011, 20:59:57 UTC |
cf7e032 | Geert Uytterhoeven | 12 May 2011, 09:11:38 UTC | zorro8390: Fix regression caused during net_device_ops conversion Changeset b6114794a1c394534659f4a17420e48cf23aa922 ("zorro8390: convert to net_device_ops") broke zorro8390 by adding 8390.o to the link. That meant that lib8390.c was included twice, once in zorro8390.c and once in 8390.c, subject to different macros. This patch reverts that by avoiding the wrappers in 8390.c. Fix based on commits 217cbfa856dc1cbc2890781626c4032d9e3ec59f ("mac8390: fix regression caused during net_device_ops conversion") and 4e0168fa4842e27795a75b205a510f25b62181d9 ("mac8390: fix build with NET_POLL_CONTROLLER"). Reported-by: Christian T. Steigies <cts@debian.org> Suggested-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Tested-by: Christian T. Steigies <cts@debian.org> Cc: stable@kernel.org Signed-off-by: David S. Miller <davem@davemloft.net> | 12 May 2011, 20:59:57 UTC |
d44cf14 | David S. Miller | 12 May 2011, 20:26:45 UTC | Merge branch 'sfc-2.6.39' of git://git.kernel.org/pub/scm/linux/kernel/git/bwh/sfc-2.6 | 12 May 2011, 20:26:45 UTC |
93826c0 | Eric Paris | 07 April 2011, 18:46:59 UTC | SELinux: delete debugging printks from filename_trans rule processing The filename_trans rule processing has some printk(KERN_ERR ) messages which were intended as debug aids in creating the code but weren't removed before it was submitted. Remove them. Reported-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: Eric Paris <eparis@redhat.com> | 12 May 2011, 20:02:42 UTC |
ca1376d | Linus Torvalds | 12 May 2011, 19:41:30 UTC | Merge branch 'fix/asoc' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6 * 'fix/asoc' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: ASoC: WM8903: Fix Digital Capture Volume range ASoC: UDA134x: Remove POWER_OFF_ON_STANDBY define. ASoC: SSM2602: Fix reg_cache_size ASoC: SSM2602: Fix 'Mic Boost2' control ASoC: SSM2602: Properly annotate i2c probe and remove functions ASoC: sst_platform: add hw_free callback to fix resource leak ASoC: Don't crash on PM operations ASoC: JZ4740: Fix i2s shutdown | 12 May 2011, 19:41:30 UTC |
0c5e157 | Linus Torvalds | 12 May 2011, 19:21:51 UTC | Merge branch 'stable/bug-fixes-for-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen * 'stable/bug-fixes-for-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen: x86/mm: Fix section mismatch derived from native_pagetable_reserve() x86,xen: introduce x86_init.mapping.pagetable_reserve Revert "xen/mmu: Add workaround "x86-64, mm: Put early page table high"" | 12 May 2011, 19:21:51 UTC |
982b203 | Linus Torvalds | 12 May 2011, 19:19:43 UTC | Revert "drm/i915: Only enable the plane after setting the fb base (pre-ILK)" This reverts commit 49183b2818de6899383bb82bc032f9344d6791ff. Quoth Franz Melchior: "This patch introduces a bug on my infamous "Acer Travelmate 5735Z-452G32Mnss": when KMS takes over, the frame buffer contents get completely garbled up on screen, with colored stripes and unreadable text (photo on request). Only when X11 is started, the screen gets restored again. Closing and re-opening the lid partly cures the mess, too: it makes the font readable, though horizontally stretched." Acked-by: Keith Packard <keithp@keithp.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 12 May 2011, 19:19:43 UTC |
df43938 | Linus Torvalds | 12 May 2011, 17:42:36 UTC | Merge branch 'fbmem' * fbmem: fbmem: make read/write/ioctl use the frame buffer at open time fbcon: add lifetime refcount to opened frame buffers | 12 May 2011, 17:42:36 UTC |
49f019c | Linus Torvalds | 12 May 2011, 17:41:31 UTC | Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: ads7846 - remove unused variable from struct ads7845_ser_req Input: ads7846 - make transfer buffers DMA safe | 12 May 2011, 17:41:31 UTC |
53f8023 | Sedat Dilek | 17 April 2011, 14:17:34 UTC | x86/mm: Fix section mismatch derived from native_pagetable_reserve() With CONFIG_DEBUG_SECTION_MISMATCH=y I see these warnings in next-20110415: LD vmlinux.o MODPOST vmlinux.o WARNING: vmlinux.o(.text+0x1ba48): Section mismatch in reference from the function native_pagetable_reserve() to the function .init.text:memblock_x86_reserve_range() The function native_pagetable_reserve() references the function __init memblock_x86_reserve_range(). This is often because native_pagetable_reserve lacks a __init annotation or the annotation of memblock_x86_reserve_range is wrong. This patch fixes the issue. Thanks to pipacs from PaX project for help on IRC. Acked-by: "H. Peter Anvin" <hpa@zytor.com> Signed-off-by: Sedat Dilek <sedat.dilek@gmail.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> | 12 May 2011, 17:05:05 UTC |
279b706 | Stefano Stabellini | 14 April 2011, 14:49:41 UTC | x86,xen: introduce x86_init.mapping.pagetable_reserve Introduce a new x86_init hook called pagetable_reserve that at the end of init_memory_mapping is used to reserve a range of memory addresses for the kernel pagetable pages we used and free the other ones. On native it just calls memblock_x86_reserve_range while on xen it also takes care of setting the spare memory previously allocated for kernel pagetable pages from RO to RW, so that it can be used for other purposes. A detailed explanation of the reason why this hook is needed follows. As a consequence of the commit: commit 4b239f458c229de044d6905c2b0f9fe16ed9e01e Author: Yinghai Lu <yinghai@kernel.org> Date: Fri Dec 17 16:58:28 2010 -0800 x86-64, mm: Put early page table high at some point init_memory_mapping is going to reach the pagetable pages area and map those pages too (mapping them as normal memory that falls in the range of addresses passed to init_memory_mapping as argument). Some of those pages are already pagetable pages (they are in the range pgt_buf_start-pgt_buf_end) therefore they are going to be mapped RO and everything is fine. Some of these pages are not pagetable pages yet (they fall in the range pgt_buf_end-pgt_buf_top; for example the page at pgt_buf_end) so they are going to be mapped RW. When these pages become pagetable pages and are hooked into the pagetable, xen will find that the guest has already a RW mapping of them somewhere and fail the operation. The reason Xen requires pagetables to be RO is that the hypervisor needs to verify that the pagetables are valid before using them. The validation operations are called "pinning" (more details in arch/x86/xen/mmu.c). In order to fix the issue we mark all the pages in the entire range pgt_buf_start-pgt_buf_top as RO, however when the pagetable allocation is completed only the range pgt_buf_start-pgt_buf_end is reserved by init_memory_mapping. Hence the kernel is going to crash as soon as one of the pages in the range pgt_buf_end-pgt_buf_top is reused (b/c those ranges are RO). For this reason we need a hook to reserve the kernel pagetable pages we used and free the other ones so that they can be reused for other purposes. On native it just means calling memblock_x86_reserve_range, on Xen it also means marking RW the pagetable pages that we allocated before but that haven't been used before. Another way to fix this is without using the hook is by adding a 'if (xen_pv_domain)' in the 'init_memory_mapping' code and calling the Xen counterpart, but that is just nasty. Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Acked-by: Yinghai Lu <yinghai@kernel.org> Acked-by: H. Peter Anvin <hpa@zytor.com> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> | 12 May 2011, 17:05:04 UTC |
92bdaef | Konrad Rzeszutek Wilk | 05 May 2011, 17:50:43 UTC | Revert "xen/mmu: Add workaround "x86-64, mm: Put early page table high"" This reverts commit a38647837a411f7df79623128421eef2118b5884. It does not work with certain AMD machines. last_pfn = 0x100000 max_arch_pfn = 0x400000000 initial memory mapped : 0 - 02c3a000 Base memory trampoline at [ffff88000009b000] 9b000 size 20480 init_memory_mapping: 0000000000000000-0000000100000000 0000000000 - 0100000000 page 4k kernel direct mapping tables up to 100000000 @ ff7fb000-100000000 init_memory_mapping: 0000000100000000-00000001e0800000 0100000000 - 01e0800000 page 4k kernel direct mapping tables up to 1e0800000 @ 1df0f3000-1e0000000 xen: setting RW the range fffdc000 - 100000000 RAMDISK: 0203b000 - 02c3a000 No NUMA configuration found Faking a node at 0000000000000000-00000001e0800000 NUMA: Using 63 for the hash shift. Initmem setup node 0 0000000000000000-00000001e0800000 NODE_DATA [00000001dfffb000 - 00000001dfffffff] BUG: unable to handle kernel NULL pointer dereference at (null) IP: [<ffffffff81cf6a75>] setup_node_bootmem+0x18a/0x1ea PGD 0 Oops: 0003 [#1] SMP last sysfs file: CPU 0 Modules linked in: Pid: 0, comm: swapper Not tainted 2.6.39-0-virtual #6~smb1 RIP: e030:[<ffffffff81cf6a75>] [<ffffffff81cf6a75>] setup_node_bootmem+0x18a/0x1ea RSP: e02b:ffffffff81c01e38 EFLAGS: 00010046 RAX: 0000000000000000 RBX: 00000001e0800000 RCX: 0000000000001040 RDX: 0000000000004100 RSI: 0000000000000000 RDI: ffff8801dfffb000 RBP: ffffffff81c01e58 R08: 0000000000000020 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000001 R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000bfe400 FS: 0000000000000000(0000) GS:ffffffff81cca000(0000) knlGS:0000000000000000 CS: e033 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 0000000001c03000 CR4: 0000000000000660 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process swapper (pid: 0, threadinfo ffffffff81c00000, task ffffffff81c0b020) Stack: 0000000000000040 0000000000000001 0000000000000000 ffffffffffffffff ffffffff81c01e88 ffffffff81cf6c25 0000000000000000 0000000000000000 ffffffff81cf687f 0000000000000000 ffffffff81c01ea8 ffffffff81cf6e45 Call Trace: [<ffffffff81cf6c25>] numa_register_memblks.constprop.3+0x150/0x181 [<ffffffff81cf687f>] ? numa_add_memblk+0x7c/0x7c [<ffffffff81cf6e45>] numa_init.part.2+0x1c/0x7c [<ffffffff81cf687f>] ? numa_add_memblk+0x7c/0x7c [<ffffffff81cf6f67>] numa_init+0x6c/0x70 [<ffffffff81cf7057>] initmem_init+0x39/0x3b [<ffffffff81ce5865>] setup_arch+0x64e/0x769 [<ffffffff815e43c1>] ? printk+0x51/0x53 [<ffffffff81cdf92b>] start_kernel+0xd4/0x3f3 [<ffffffff81cdf388>] x86_64_start_reservations+0x132/0x136 [<ffffffff81ce2ed4>] xen_start_kernel+0x588/0x58f Code: 41 00 00 48 8b 3c c5 a0 24 cc 81 31 c0 40 f6 c7 01 74 05 aa 66 ba ff 40 40 f6 c7 02 74 05 66 ab 83 ea 02 89 d1 c1 e9 02 f6 c2 02 <f3> ab 74 02 66 ab 80 e2 01 74 01 aa 49 63 c4 48 c1 eb 0c 44 89 RIP [<ffffffff81cf6a75>] setup_node_bootmem+0x18a/0x1ea RSP <ffffffff81c01e38> CR2: 0000000000000000 ---[ end trace a7919e7f17c0a725 ]--- Kernel panic - not syncing: Attempted to kill the idle task! Pid: 0, comm: swapper Tainted: G D 2.6.39-0-virtual #6~smb1 Reported-by: Stefan Bader <stefan.bader@canonical.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> | 12 May 2011, 17:04:29 UTC |
6eaed0a | Linus Torvalds | 12 May 2011, 15:06:53 UTC | Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse: fuse: fix oops in revalidate when called with NULL nameidata | 12 May 2011, 15:06:53 UTC |
8043f4e | Linus Torvalds | 12 May 2011, 14:53:34 UTC | Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6 * git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6: sparc32: Fixed unaligned memory copying in function __csum_partial_copy_sparc_generic sparc32: fix sparcstation 5 boot sparc32: fix section mismatch warnings in apc, pmc and time_32 | 12 May 2011, 14:53:34 UTC |
75c0b3b | Linus Torvalds | 12 May 2011, 14:53:06 UTC | Merge branch 'fixes' of master.kernel.org:/home/rmk/linux-2.6-arm * 'fixes' of master.kernel.org:/home/rmk/linux-2.6-arm: ARM: 6870/1: The mandatory barrier rmb() must be a dsb() in for device accesses ARM: 6892/1: handle ptrace requests to change PC during interrupted system calls ARM: 6890/1: memmap: only free allocated memmap entries when using SPARSEMEM ARM: zImage: the page table memory must be considered before relocation ARM: zImage: make sure not to relocate on top of the relocation code ARM: zImage: Fix bad SP address after relocating kernel ARM: zImage: make sure the stack is 64-bit aligned ARM: RiscPC: acornfb: fix section mismatches ARM: RiscPC: etherh: fix section mismatches | 12 May 2011, 14:53:06 UTC |
c47747f | Linus Torvalds | 11 May 2011, 21:58:34 UTC | fbmem: make read/write/ioctl use the frame buffer at open time read/write/ioctl on a fbcon file descriptor has traditionally used the fbcon not when it was opened, but as it was at the time of the call. That makes no sense, but the lack of sense is much more obvious now that we properly ref-count the usage - it means that the ref-counting doesn't actually protect operations we do on the frame buffer. This changes it to look at the fb_info that we got at open time, but in order to avoid using a frame buffer long after it has been unregistered, we do verify that it is still current, and return -ENODEV if not. Acked-by: Tim Gardner <tim.gardner@canonical.com> Tested-by: Daniel J Blueman <daniel.blueman@gmail.com> Tested-by: Anca Emanuel <anca.emanuel@gmail.com> Cc: Bruno Prémont <bonbons@linux-vserver.org> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Dave Airlie <airlied@redhat.com> Cc: Andy Whitcroft <andy.whitcroft@canonical.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 12 May 2011, 14:46:43 UTC |
698b368 | Linus Torvalds | 11 May 2011, 21:49:36 UTC | fbcon: add lifetime refcount to opened frame buffers This just adds the refcount and the new registration lock logic. It does not (for example) actually change the read/write/ioctl routines to actually use the frame buffer that was opened: those function still end up alway susing whatever the current frame buffer is at the time of the call. Without this, if something holds the frame buffer open over a framebuffer switch, the close() operation after the switch will access a fb_info that has been free'd by the unregistering of the old frame buffer. (The read/write/ioctl operations will normally not cause problems, because they will - illogically - pick up the new fbcon instead. But a switch that happens just as one of those is going on might see problems too, the window is just much smaller: one individual op rather than the whole open-close sequence.) This use-after-free is apparently fairly easily triggered by the Ubuntu 11.04 boot sequence. Acked-by: Tim Gardner <tim.gardner@canonical.com> Tested-by: Daniel J Blueman <daniel.blueman@gmail.com> Tested-by: Anca Emanuel <anca.emanuel@gmail.com> Cc: Bruno Prémont <bonbons@linux-vserver.org> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Dave Airlie <airlied@redhat.com> Cc: Andy Whitcroft <andy.whitcroft@canonical.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 12 May 2011, 14:37:51 UTC |
747df22 | Ben Hutchings | 11 May 2011, 16:41:18 UTC | sfc: Always map MCDI shared memory as uncacheable We enabled write-combining for memory-mapped registers in commit 65f0b417dee94f779ce9b77102b7d73c93723b39, but inhibited it for the MCDI shared memory where this is not supported. However, write-combining mappings also allow read-reordering, which may also be a problem. I found that when an SFC9000-family controller is connected to an Intel 3000 chipset, and write-combining is enabled, the controller stops responding to PCIe read requests during driver initialisation while the driver is polling for completion of an MCDI command. This results in an NMI and system hang. Adding read memory barriers between all reads to the shared memory area appears to reduce but not eliminate the probability of this. We have not yet established whether this is a bug in our BIU or in the PCIe bridge. For now, work around by mapping the shared memory area separately. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> | 12 May 2011, 14:16:32 UTC |
a904f5f | Catalin Marinas | 06 April 2011, 15:18:47 UTC | ARM: 6870/1: The mandatory barrier rmb() must be a dsb() in for device accesses Since mandatory barriers may be used (explicitly or implicitly via readl etc.) to ensure the ordering between Device and Normal memory accesses, a DMB is not enough. This patch converts it to a DSB. Cc: Colin Cross <ccross@android.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> | 12 May 2011, 09:52:00 UTC |
2af68df | Arnd Bergmann | 03 May 2011, 17:32:55 UTC | ARM: 6892/1: handle ptrace requests to change PC during interrupted system calls GDB's interrupt.exp test cases currenly fail on ARM. The problem is how do_signal handled restarting interrupted system calls: The entry.S assembler code determines that we come from a system call; and that information is passed as "syscall" parameter to do_signal. That routine then calls get_signal_to_deliver [*] and if a signal is to be delivered, calls into handle_signal. If a system call is to be restarted either after the signal handler returns, or if no handler is to be called in the first place, the PC is updated after the get_signal_to_deliver call, either in handle_signal (if we have a handler) or at the end of do_signal (otherwise). Now the problem is that during [*], the call to get_signal_to_deliver, a ptrace intercept may happen. During this intercept, the debugger may change registers, including the PC. This is done by GDB if it wants to execute an "inferior call", i.e. the execution of some code in the debugged program triggered by GDB. To this purpose, GDB will save all registers, allocate a stack frame, set up PC and arguments as appropriate for the call, and point the link register to a dummy breakpoint instruction. Once the process is restarted, it will execute the call and then trap back to the debugger, at which point GDB will restore all registers and continue original execution. This generally works fine. However, now consider what happens when GDB attempts to do exactly that while the process was interrupted during execution of a to-be- restarted system call: do_signal is called with the syscall flag set; it calls get_signal_to_deliver, at which point the debugger takes over and changes the PC to point to a completely different place. Now get_signal_to_deliver returns without a signal to deliver; but now do_signal decides it should be restarting a system call, and decrements the PC by 2 or 4 -- so it now points to 2 or 4 bytes before the function GDB wants to call -- which leads to a subsequent crash. To fix this problem, two things need to be supported: - do_signal must be able to recognize that get_signal_to_deliver changed the PC to a different location, and skip the restart-syscall sequence - once the debugger has restored all registers at the end of the inferior call sequence, do_signal must recognize that *now* it needs to restart the pending system call, even though it was now entered from a breakpoint instead of an actual svc instruction This set of issues is solved on other platforms, usually by one of two mechanisms: - The status information "do_signal is handling a system call that may need restarting" is itself carried in some register that can be accessed via ptrace. This is e.g. on Intel the "orig_eax" register; on Sparc the kernel defines a magic extra bit in the flags register for this purpose. This allows GDB to manage that state: reset it when doing an inferior call, and restore it after the call is finished. - On s390, do_signal transparently handles this problem without requiring GDB interaction, by performing system call restarting in the following way: first, adjust the PC as necessary for restarting the call. Then, call get_signal_to_deliver; and finally just continue execution at the PC. This way, if GDB does not change the PC, everything is as before. If GDB *does* change the PC, execution will simply continue there -- and once GDB restores the PC it saved at that point, it will automatically point to the *restarted* system call. (There is the minor twist how to handle system calls that do *not* need restarting -- do_signal will undo the PC change in this case, after get_signal_to_deliver has returned, and only if ptrace did not change the PC during that call.) Because there does not appear to be any obvious register to carry the syscall-restart information on ARM, we'd either have to introduce a new artificial ptrace register just for that purpose, or else handle the issue transparently like on s390. The patch below implements the second option; using this patch makes the interrupt.exp test cases pass on ARM, with no regression in the GDB test suite otherwise. Cc: patches@linaro.org Signed-off-by: Ulrich Weigand <ulrich.weigand@linaro.org> Signed-off-by: Arnd Bergmann <arnd.bergmann@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> | 12 May 2011, 09:52:00 UTC |
9af386c | Will Deacon | 28 April 2011, 17:44:31 UTC | ARM: 6890/1: memmap: only free allocated memmap entries when using SPARSEMEM The SPARSEMEM code allocates memmap entries only for sections which are present (i.e. those which contain some valid memory). The membank checks in free_unused_memmap do not take this into account and can incorrectly attempt to free memory which is not allocated, resulting in a BUG() in the bootmem code. However, if memory is configured as follows: |<----section---->|<----hole---->|<----section---->| +--------+--------+--------------+--------+--------+ | bank 0 | unused | | bank 1 | unused | +--------+--------+--------------+--------+--------+ where a bank only occupies part of a section, the memmap allocated for the remainder of the section *can* be freed. This patch modifies the checks in free_unused_memmap so that only valid memmap entries are considered for removal. Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> | 12 May 2011, 09:52:00 UTC |
b105428 | Tkhai Kirill | 10 May 2011, 02:31:41 UTC | sparc32: Fixed unaligned memory copying in function __csum_partial_copy_sparc_generic When we are in the label cc_dword_align, registers %o0 and %o1 have the same last 2 bits, but it's not guaranteed one of them is zero. So we can get unaligned memory access in label ccte. Example of parameters which lead to this: %o0=0x7ff183e9, %o1=0x8e709e7d, %g1=3 With the parameters I had a memory corruption, when the additional 5 bytes were rewritten. This patch corrects the error. One comment to the patch. We don't care about the third bit in %o1, because cc_end_cruft stores word or less. Signed-off-by: Tkhai Kirill <tkhai@yandex.ru> Signed-off-by: David S. Miller <davem@davemloft.net> | 12 May 2011, 04:35:04 UTC |
21ccc79 | Anton Blanchard | 10 May 2011, 16:17:10 UTC | ehea: Fix memory hotplug oops The ehea driver oopses during memory hotplug if the ports are not up. A simple testcase: # ifconfig ethX down # echo offline > /sys/devices/system/memory/memory32/state Oops: Kernel access of bad area, sig: 11 [#1] last sysfs file: /sys/devices/system/memory/memory32/state REGS: c000000709393110 TRAP: 0300 Not tainted (2.6.39-rc2-01385-g7ef73bc-dirty) DAR: 0000000000000000, DSISR: 40000000 ... NIP [c000000000067c98] .__wake_up_common+0x48/0xf0 LR [c00000000006d034] .__wake_up+0x54/0x90 Call Trace: [c00000000006d034] .__wake_up+0x54/0x90 [d000000006bb6270] .ehea_rereg_mrs+0x140/0x730 [ehea] [d000000006bb69c4] .ehea_mem_notifier+0x164/0x170 [ehea] [c0000000006fc8a8] .notifier_call_chain+0x78/0xf0 [c0000000000b3d70] .__blocking_notifier_call_chain+0x70/0xb0 [c000000000458d78] .memory_notify+0x28/0x40 [c0000000001871d8] .remove_memory+0x208/0x6d0 [c000000000458264] .memory_section_action+0x94/0x140 [c0000000004583ec] .memory_block_change_state+0xdc/0x1d0 [c0000000004585cc] .store_mem_state+0xec/0x160 [c00000000044768c] .sysdev_store+0x3c/0x50 [c00000000020b48c] .sysfs_write_file+0xec/0x1f0 [c00000000018f86c] .vfs_write+0xec/0x1e0 [c00000000018fa88] .SyS_write+0x58/0xd0 To fix this, initialise the waitqueues during port probe instead of port open. Signed-off-by: Anton Blanchard <anton@samba.org> Cc: stable@kernel.org Acked-by: Breno Leitao <leitao@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 12 May 2011, 04:09:34 UTC |
a75b9df | Trond Myklebust | 11 May 2011, 22:00:51 UTC | NFSv4.1: Ensure that layoutget uses the correct gfp modes Currently, writebacks may end up recursing back into the filesystem due to GFP_KERNEL direct reclaims in the pnfs subsystem. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com> | 12 May 2011, 02:52:13 UTC |
3568bd9 | Linus Torvalds | 12 May 2011, 02:13:34 UTC | Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client: ceph: do not use i_wrbuffer_ref as refcount for Fb cap ceph: fix list_add in ceph_put_snap_realm ceph: print debug message before put mds session | 12 May 2011, 02:13:34 UTC |
fad6320 | Linus Torvalds | 12 May 2011, 02:13:16 UTC | Merge branch 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6 * 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: drm/radeon/nouveau: fix build regression on alpha due to Xen changes. drm/radeon/kms: fix cayman acceleration drm/radeon: fix cayman struct accessors. | 12 May 2011, 02:13:16 UTC |
b512129 | Linus Torvalds | 12 May 2011, 02:00:15 UTC | Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6: mfd: Fix for the TWL4030 PM sleep/wakeup sequence mfd: Fix asic3 build error mfd: Fixed gpio polarity of omap-usb gpio USB-phy reset | 12 May 2011, 02:00:15 UTC |
409ab14 | Linus Torvalds | 12 May 2011, 01:59:45 UTC | Merge branch 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6 * 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6: [S390] fix alloc_pgste check in init_new_context [S390] oprofile: fix min/max interval query checks [S390] replace diag10() with diag10_range() function [S390] disassembler: handle b280/spp instruction [S390] kernel: Initialize register 14 when starting new CPU [S390] dasd: prevent IO error during reserve/release loop [S390] sclp/memory hotplug: fix initial usecount of increments | 12 May 2011, 01:59:45 UTC |
ce84537 | Linus Torvalds | 12 May 2011, 01:58:16 UTC | Revert "Bluetooth: fix shutdown on SCO sockets" This reverts commit f21ca5fff6e548833fa5ee8867239a8378623150. Quoth Gustavo F. Padovan: "Commit f21ca5fff6e548833fa5ee8867239a8378623150 can cause a NULL dereference if we call shutdown in a bluetooth SCO socket and doesn't wait the shutdown completion to call close(). Please revert it. I may have a fix for it soon, but we don't have time anymore, so revert is the way to go. ;)" Requested-by: Gustavo F. Padovan <padovan@profusion.mobi> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 12 May 2011, 01:58:16 UTC |
0e6f76c | Linus Torvalds | 12 May 2011, 01:57:05 UTC | Merge branch 'pm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6 * 'pm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6: PM / Hibernate: Fix ioctl SNAPSHOT_S2RAM PM / Hibernate: Make snapshot_release() restore GFP mask PM: Fix warning in pm_restrict_gfp_mask() during SNAPSHOT_S2RAM ioctl | 12 May 2011, 01:57:05 UTC |
1d929b7 | Mel Gorman | 11 May 2011, 22:13:39 UTC | mm: tracing: add missing GFP flags to tracing include/linux/gfp.h and include/trace/events/gfpflags.h are out of sync. When tracing is enabled, certain flags are not recognised and the text output is less useful as a result. Add the missing flags. Signed-off-by: Mel Gorman <mgorman@suse.de> Cc: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 12 May 2011, 01:50:45 UTC |
59a16ea | Hugh Dickins | 11 May 2011, 22:13:38 UTC | tmpfs: fix spurious ENOSPC when racing with unswap Testing the shmem_swaplist replacements for igrab() revealed another bug: writes to /dev/loop0 on a tmpfs file which fills its filesystem were sometimes failing with "Buffer I/O error"s. These came from ENOSPC failures of shmem_getpage(), when racing with swapoff: the same could happen when racing with another shmem_getpage(), pulling the page in from swap in between our find_lock_page() and our taking the info->lock (though not in the single-threaded loop case). This is unacceptable, and surprising that I've not noticed it before: it dates back many years, but (presumably) was made a lot easier to reproduce in 2.6.36, which sited a page preallocation in the race window. Fix it by rechecking the page cache before settling on an ENOSPC error. Signed-off-by: Hugh Dickins <hughd@google.com> Cc: Konstantin Khlebnikov <khlebnikov@openvz.org> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 12 May 2011, 01:50:45 UTC |
778dd89 | Hugh Dickins | 11 May 2011, 22:13:37 UTC | tmpfs: fix race between umount and swapoff The use of igrab() in swapoff's shmem_unuse_inode() is just as vulnerable to umount as that in shmem_writepage(). Fix this instance by extending the protection of shmem_swaplist_mutex right across shmem_unuse_inode(): while it's on the list, the inode cannot be evicted (and the filesystem cannot be unmounted) without shmem_evict_inode() taking that mutex to remove it from the list. But since shmem_writepage() might take that mutex, we should avoid making memory allocations or memcg charges while holding it: prepare them at the outer level in shmem_unuse(). When mem_cgroup_cache_charge() was originally placed, we didn't know until that point that the page from swap was actually a shmem page; but nowadays it's noted in the swap_map, so we're safe to charge upfront. For the radix_tree, do as is done in shmem_getpage(): preload upfront, but don't pin to the cpu; so we make a habit of refreshing the node pool, but might dip into GFP_NOWAIT reserves on occasion if subsequently preempted. With the allocation and charge moved out from shmem_unuse_inode(), we can also hold index map and info->lock over from finding the entry. Signed-off-by: Hugh Dickins <hughd@google.com> Cc: Konstantin Khlebnikov <khlebnikov@openvz.org> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 12 May 2011, 01:50:45 UTC |
b1dea80 | Hugh Dickins | 11 May 2011, 22:13:36 UTC | tmpfs: fix race between umount and writepage Konstanin Khlebnikov reports that a dangerous race between umount and shmem_writepage can be reproduced by this script: for i in {1..300} ; do mkdir $i while true ; do mount -t tmpfs none $i dd if=/dev/zero of=$i/test bs=1M count=$(($RANDOM % 100)) umount $i done & done on a 6xCPU node with 8Gb RAM: kernel very unstable after this accident. =) Kernel log: VFS: Busy inodes after unmount of tmpfs. Self-destruct in 5 seconds. Have a nice day... WARNING: at lib/list_debug.c:53 __list_del_entry+0x8d/0x98() list_del corruption. prev->next should be ffff880222fdaac8, but was (null) Pid: 11222, comm: mount.tmpfs Not tainted 2.6.39-rc2+ #4 Call Trace: warn_slowpath_common+0x80/0x98 warn_slowpath_fmt+0x41/0x43 __list_del_entry+0x8d/0x98 evict+0x50/0x113 iput+0x138/0x141 ... BUG: unable to handle kernel paging request at ffffffffffffffff IP: shmem_free_blocks+0x18/0x4c Pid: 10422, comm: dd Tainted: G W 2.6.39-rc2+ #4 Call Trace: shmem_recalc_inode+0x61/0x66 shmem_writepage+0xba/0x1dc pageout+0x13c/0x24c shrink_page_list+0x28e/0x4be shrink_inactive_list+0x21f/0x382 ... shmem_writepage() calls igrab() on the inode for the page which came from page reclaim, to add it later into shmem_swaplist for swapoff operation. This igrab() can race with super-block deactivating process: shrink_inactive_list() deactivate_super() pageout() tmpfs_fs_type->kill_sb() shmem_writepage() kill_litter_super() generic_shutdown_super() evict_inodes() igrab() atomic_read(&inode->i_count) skip-inode iput() if (!list_empty(&sb->s_inodes)) printk("VFS: Busy inodes after... This igrap-iput pair was added in commit 1b1b32f2c6f6 "tmpfs: fix shmem_swaplist races" based on incorrect assumptions: igrab() protects the inode from concurrent eviction by deletion, but it does nothing to protect it from concurrent unmounting, which goes ahead despite the raised i_count. So this use of igrab() was wrong all along, but the race made much worse in 2.6.37 when commit 63997e98a3be "split invalidate_inodes()" replaced two attempts at invalidate_inodes() by a single evict_inodes(). Konstantin posted a plausible patch, raising sb->s_active too: I'm unsure whether it was correct or not; but burnt once by igrab(), I am sure that we don't want to rely more deeply upon externals here. Fix it by adding the inode to shmem_swaplist earlier, while the page lock on page in page cache still secures the inode against eviction, without artifically raising i_count. It was originally added later because shmem_unuse_inode() is liable to remove an inode from the list while it's unswapped; but we can guard against that by taking spinlock before dropping mutex. Reported-by: Konstantin Khlebnikov <khlebnikov@openvz.org> Signed-off-by: Hugh Dickins <hughd@google.com> Tested-by: Konstantin Khlebnikov <khlebnikov@openvz.org> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 12 May 2011, 01:50:45 UTC |
21a3c96 | Andi Kleen | 11 May 2011, 22:13:35 UTC | memcg: allocate memory cgroup structures in local nodes Commit dde79e005a769 ("page_cgroup: reduce allocation overhead for page_cgroup array for CONFIG_SPARSEMEM") added a regression that the memory cgroup data structures all end up in node 0 because the first attempt at allocating them would not pass in a node hint. Since the initialization runs on CPU #0 it would all end up node 0. This is a problem on large memory systems, where node 0 would lose a lot of memory. Change the alloc_pages_exact() to alloc_pages_exact_nid(). This will still fall back to other nodes if not enough memory is available. [ RED-PEN: right now it would fall back first before trying vmalloc_node. Probably not the best strategy ... But I left it like that for now. ] Signed-off-by: Andi Kleen <ak@linux.intel.com> Reported-by: Doug Nelson Cc: David Rientjes <rientjes@google.com> Reviewed-by: Michal Hocko <mhocko@suse.cz> Cc: Dave Hansen <dave@linux.vnet.ibm.com> Acked-by: Balbir Singh <balbir@linux.vnet.ibm.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 12 May 2011, 01:50:45 UTC |
ee85c2e | Andi Kleen | 11 May 2011, 22:13:34 UTC | mm: add alloc_pages_exact_nid() Add a alloc_pages_exact_nid() that allocates on a specific node. The naming is quite broken, but fixing that would need a larger renaming action. [akpm@linux-foundation.org: coding-style fixes] [akpm@linux-foundation.org: tweak comment] Signed-off-by: Andi Kleen <ak@linux.intel.com> Cc: Michal Hocko <mhocko@suse.cz> Cc: Balbir Singh <balbir@linux.vnet.ibm.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Dave Hansen <dave@linux.vnet.ibm.com> Cc: David Rientjes <rientjes@google.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 12 May 2011, 01:50:45 UTC |
71a6d0a | Harry Wei | 11 May 2011, 22:13:33 UTC | MAINTAINERS: fix sorting Take alphabetical orders for MAINTAINERS file. Signed-off-by: Harry Wei <harryxiyou@gmail.com> Cc: Joe Perches <joe@perches.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 12 May 2011, 01:50:45 UTC |
8f389a9 | Yinghai Lu | 11 May 2011, 22:13:32 UTC | mm: use alloc_bootmem_node_nopanic() on really needed path Stefan found nobootmem does not work on his system that has only 8M of RAM. This causes an early panic: BIOS-provided physical RAM map: BIOS-88: 0000000000000000 - 000000000009f000 (usable) BIOS-88: 0000000000100000 - 0000000000840000 (usable) bootconsole [earlyser0] enabled Notice: NX (Execute Disable) protection missing in CPU or disabled in BIOS! DMI not present or invalid. last_pfn = 0x840 max_arch_pfn = 0x100000 init_memory_mapping: 0000000000000000-0000000000840000 8MB LOWMEM available. mapped low ram: 0 - 00840000 low ram: 0 - 00840000 Zone PFN ranges: DMA 0x00000001 -> 0x00001000 Normal empty Movable zone start PFN for each node early_node_map[2] active PFN ranges 0: 0x00000001 -> 0x0000009f 0: 0x00000100 -> 0x00000840 BUG: Int 6: CR2 (null) EDI c034663c ESI (null) EBP c0329f38 ESP c0329ef4 EBX c0346380 EDX 00000006 ECX ffffffff EAX fffffff4 err (null) EIP c0353191 CS c0320060 flg 00010082 Stack: (null) c030c533 000007cd (null) c030c533 00000001 (null) (null) 00000003 0000083f 00000018 00000002 00000002 c0329f6c c03534d6 (null) (null) 00000100 00000840 (null) c0329f64 00000001 00001000 (null) Pid: 0, comm: swapper Not tainted 2.6.36 #5 Call Trace: [<c02e3707>] ? 0xc02e3707 [<c035e6e5>] 0xc035e6e5 [<c0353191>] ? 0xc0353191 [<c03534d6>] 0xc03534d6 [<c034f1cd>] 0xc034f1cd [<c034a824>] 0xc034a824 [<c03513cb>] ? 0xc03513cb [<c0349432>] 0xc0349432 [<c0349066>] 0xc0349066 It turns out that we should ignore the low limit of 16M. Use alloc_bootmem_node_nopanic() in this case. [akpm@linux-foundation.org: less mess] Signed-off-by: Yinghai LU <yinghai@kernel.org> Reported-by: Stefan Hellermann <stefan@the2masters.de> Tested-by: Stefan Hellermann <stefan@the2masters.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: "H. Peter Anvin" <hpa@linux.intel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: <stable@kernel.org> [2.6.34+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 12 May 2011, 01:50:44 UTC |
bad49d9 | Minchan Kim | 11 May 2011, 22:13:30 UTC | mm: check PageUnevictable in lru_deactivate_fn() The lru_deactivate_fn should not move page which in on unevictable lru into inactive list. Otherwise, we can meet BUG when we use isolate_lru_pages as __isolate_lru_page could return -EINVAL. Reported-by: Ying Han <yinghan@google.com> Tested-by: Ying Han <yinghan@google.com> Signed-off-by: Minchan Kim <minchan.kim@gmail.com> Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Reviewed-by: Rik van Riel<riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 12 May 2011, 01:50:44 UTC |
52cd4e5 | Ben Dooks | 11 May 2011, 22:13:28 UTC | drivers/rtc/rtc-s3c.c: fixup wake support for rtc The driver is not balancing set_irq and disable_irq_wake() calls, so ensure that it keeps track of whether the wake is enabled. The fixes the following error on S3C6410 devices: WARNING: at kernel/irq/manage.c:382 set_irq_wake+0x84/0xec() Unbalanced IRQ 92 wake disable Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 12 May 2011, 01:50:44 UTC |
78d41b3 | David S. Miller | 11 May 2011, 23:13:08 UTC | Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6 | 11 May 2011, 23:13:08 UTC |
36cb703 | Rafael J. Wysocki | 10 May 2011, 19:10:13 UTC | PM / Hibernate: Fix ioctl SNAPSHOT_S2RAM The SNAPSHOT_S2RAM ioctl used for implementing the feature allowing one to suspend to RAM after creating a hibernation image is currently broken, because it doesn't clear the "ready" flag in the struct snapshot_data object handled by it. As a result, the SNAPSHOT_UNFREEZE doesn't work correctly after SNAPSHOT_S2RAM has returned and the user space hibernate task cannot thaw the other processes as appropriate. Make SNAPSHOT_S2RAM clear data->ready to fix this problem. Tested-by: Alexandre Felipe Muller de Souza <alexandrefm@mandriva.com.br> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Cc: stable@kernel.org | 11 May 2011, 19:10:58 UTC |
9744997 | Rafael J. Wysocki | 10 May 2011, 19:10:01 UTC | PM / Hibernate: Make snapshot_release() restore GFP mask If the process using the hibernate user space interface closes /dev/snapshot after creating a hibernation image without thawing tasks, snapshot_release() should call pm_restore_gfp_mask() to restore the GFP mask used before the creation of the image. Make that happen. Tested-by: Alexandre Felipe Muller de Souza <alexandrefm@mandriva.com.br> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Cc: stable@kernel.org | 11 May 2011, 19:10:43 UTC |
8718647 | Rafael J. Wysocki | 10 May 2011, 19:09:53 UTC | PM: Fix warning in pm_restrict_gfp_mask() during SNAPSHOT_S2RAM ioctl A warning is printed by pm_restrict_gfp_mask() while the SNAPSHOT_S2RAM ioctl is being executed after creating a hibernation image, because pm_restrict_gfp_mask() has been called once already before the image creation and suspend_devices_and_enter() calls it once again. This happens after commit 452aa6999e6703ffbddd7f6ea124d3 (mm/pm: force GFP_NOIO during suspend/hibernation and resume). To avoid this issue, move pm_restrict_gfp_mask() and pm_restore_gfp_mask() from suspend_devices_and_enter() to its caller in kernel/power/suspend.c. Reported-by: Alexandre Felipe Muller de Souza <alexandrefm@mandriva.com.br> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Cc: stable@kernel.org | 11 May 2011, 19:10:14 UTC |
2887fe4 | Andy Adamson | 11 May 2011, 05:19:58 UTC | NFSv4.1: remove pnfs_layout_hdr from pnfs_destroy_all_layouts tmp_list Prevents an infinite loop as list was never emptied. Signed-off-by: Andy Adamson <andros@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com> | 11 May 2011, 18:20:13 UTC |
a8a4ae3 | Andy Adamson | 03 May 2011, 17:43:03 UTC | NFSv41: Resend on NFS4ERR_RETRY_UNCACHED_REP Free the slot and resend the RPC with new session <slot#,seq#>. For nfs4_async_handle_error, return -EAGAIN and set the task->tk_status to 0 to restart the async rpc in the rpc_restart_call_prepare state which resets the slot. For nfs4_handle_exception, retrying a call that uses nfs4_call_sync will reset the slot via nfs41_call_sync_prepare. For open/close/lock/locku/delegreturn/layoutcommit/unlink/rename/write cachethis is true, so these operations will not trigger an NFS4ERR_RETRY_UNCACHED_REP. Signed-off-by: Andy Adamson <andros@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com> | 11 May 2011, 18:01:33 UTC |
c56b2dd | Laurent Pinchart | 10 May 2011, 14:56:46 UTC | omap: iommu: Return IRQ_HANDLED in fault handler when no fault occured Commit d594f1f31afe13edd8c02f3854a65cc58cfb3b74 (omap: IOMMU: add support to callback during fault handling) broke interrupt line sharing between the OMAP3 ISP and its IOMMU. Because of this, every interrupt generated by the OMAP3 ISP is handled by the IOMMU driver instead of being passed to the OMAP3 ISP driver. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Hiroshi DOYU <Hiroshi.DOYU@nokia.com> Signed-off-by: Tony Lindgren <tony@atomide.com> | 11 May 2011, 17:47:50 UTC |
d3d0720 | Henry C Chang | 11 May 2011, 10:29:54 UTC | ceph: do not use i_wrbuffer_ref as refcount for Fb cap We increments i_wrbuffer_ref when taking the Fb cap. This breaks the dirty page accounting and causes looping in __ceph_do_pending_vmtruncate, and ceph client hangs. This bug can be reproduced occasionally by running blogbench. Add a new field i_wb_ref to inode and dedicate it to Fb reference counting. Signed-off-by: Henry C Chang <henry.cy.chang@gmail.com> Signed-off-by: Sage Weil <sage@newdream.net> | 11 May 2011, 17:44:48 UTC |
a26a185 | Henry C Chang | 11 May 2011, 10:29:53 UTC | ceph: fix list_add in ceph_put_snap_realm Signed-off-by: Henry C Chang <henry.cy.chang@gmail.com> Signed-off-by: Sage Weil <sage@newdream.net> | 11 May 2011, 17:44:36 UTC |
7d8e18a | Henry C Chang | 11 May 2011, 10:29:52 UTC | ceph: print debug message before put mds session The mds session, s, could be freed during ceph_put_mds_session. Move dout before ceph_put_mds_session. Signed-off-by: Henry C Chang <henry.cy.chang@gmail.com> Signed-off-by: Sage Weil <sage@newdream.net> | 11 May 2011, 17:44:34 UTC |
c62dd36 | Lesly A M | 14 April 2011, 12:27:49 UTC | mfd: Fix for the TWL4030 PM sleep/wakeup sequence Only configure sleep script when the flag is TWL4030_SLEEP_SCRIPT. Adding the missing brackets for fixing the issue. Signed-off-by: Lesly A M <leslyam@ti.com> Cc: Nishanth Menon <nm@ti.com> Cc: David Derrick <dderrick@ti.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> | 11 May 2011, 09:09:58 UTC |
a09aee8 | Axel Lin | 14 April 2011, 14:43:47 UTC | mfd: Fix asic3 build error Fix below compile error: CC drivers/mfd/asic3.o drivers/mfd/asic3.c: In function 'asic3_irq_demux': drivers/mfd/asic3.c:147: error: 'irq_data' undeclared (first use in this function) drivers/mfd/asic3.c:147: error: (Each undeclared identifier is reported only once drivers/mfd/asic3.c:147: error: for each function it appears in.) Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> | 11 May 2011, 09:09:57 UTC |
557f447 | Juergen Kilb | 14 April 2011, 07:31:43 UTC | mfd: Fixed gpio polarity of omap-usb gpio USB-phy reset With commit 19403165 a main part of ehci-omap.c moved to drivers/mfd/omap-usb-host.c created by commit 17cdd29d. Due to this reorganisation the polarity used to reset the external USB phy changed and USB host doesn't recognize any devices. Signed-off-by: Juergen Kilb <J.Kilb@phytec.de> Acked-by: Felipe Balbi <balbi@ti.com> Tested-by: Steve Sakoman <steve@sakoman.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> | 11 May 2011, 09:09:57 UTC |
03a8066 | Dave Airlie | 09 May 2011, 02:24:04 UTC | drm/radeon/nouveau: fix build regression on alpha due to Xen changes. The Xen changes were using DMA_ERROR_CODE which isn't defined on a few platforms, however we reverted the Xen patch that caused use to try and use this code path earlier in 2.6.39 cycle, so for now lets just force the code to never take this path and allow it to build again on alpha. The proper long term answer is probably to store if the dma_addr has been assigned to alongside the dma_addr in the higher level code, though I think Thomas wanted to rewrite most of this anyways properly. Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Dave Airlie <airlied@redhat.com> | 11 May 2011, 03:08:02 UTC |
1f03128 | Alex Deucher | 10 May 2011, 02:14:52 UTC | drm/radeon/kms: fix cayman acceleration The TCC disable setup was incorrect. This prevents the GPU from hanging when draw commands are issued. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com> | 11 May 2011, 03:06:56 UTC |
285e042 | Dave Airlie | 09 May 2011, 04:54:33 UTC | drm/radeon: fix cayman struct accessors. We are accessing totally the wrong struct in this case, and putting uninitialised values into the GPU, which it doesn't like unsurprisingly. Signed-off-by: Dave Airlie <airlied@redhat.com> | 11 May 2011, 03:01:21 UTC |