Revision df9c3ce17b97334372207ee14a0795efda39a7a1 authored by Benjamin Hillman on 26 August 2021, 04:12:16 UTC, committed by Benjamin Hillman on 06 October 2021, 18:52:30 UTC
1 parent 1a44107
README
models/lnd/clm/tools/README May/07/2013
CLM tools for analysis of CLM history files -- or for creation or
modification of CLM input files.
I. General directory structure:
clm4_0
mksurfdata_map --- Create surface datasets.
interpinic ------- Interpolate initial datasets to a different resolution.
(has optimized and OMP options)
clm4_5
mksurfdata_map --- Create surface datasets.
interpinic ------- Interpolate initial datasets to a different resolution.
(has optimized and OMP options)
shared
mkmapgrids ------- Create SCRIP grid files needed by mkmapdata
[input is CLM grid files]
(deprecated)
mkmapdata -------- Create SCRIP mapping data from SCRIP grid files (uses ESMF)
gen_domain ------- Create data model domain datasets from SCRIP mapping datasets.
(also in the top level mapping directory [../../../../mapping])
mkprocdata_map --- Convert output unstructured grids into a 2D format that
can be plotted easily
ncl_scripts ------ NCL post or pre processing scripts.
Note that there are different versions of mksurfdata_map and interpinic for
CLM4.0 vs. CLM4.5. Other tools are shared between the two model
versions.
However, note that mkmapdata makes mapping files for CLM4.5 by default; to
make mapping files for CLM4.0, run the tool with the option:
-p clm4_0
II. Notes on building/running for each of the above tools:
Each tool that has FORTRAN source code has the following files:
README ------- Specific help for using the specific tool and help on specific
files in that directory.
src/Filepath ----- List of directories needed to build the tool
(some files in ../src directories are required).
src/Makefile ----- GNU Makefile to build the tool
(these are identical between tools.
src/Macros.custom Customization of make macros for the particular tool in question
src/Srcfiles ----- List of source files that are needed.
src/Mkdepends ---- Dependency generator program
mkmapdata and ncl_scripts only contain scripts so don't have the above build files.
Most tools have copies of files from other directories -- see the README.filecopies
file for more information on this.
Tools may also have files with the directory name followed by: namelist, runoptions,
regional, or singlept these are sample namelists:
<directory>.namelist ------ Namelist to create a global file.
<directory>.regional ------ Namelist to create a regional file.
<directory>.singlept ------ Namelist to create a single-point file.
<directory>.runoptions ---- Command line options to use the given tool.
These files are also used by the test scripts to test the tools (see the
README.testing) file.
NOTE: Be sure to change the path of the datasets references by these namelists to
point to where you have exported your CESM inputdata datasets.
To build:
cd <directory>
setenv INC_NETCDF <path-to-NetCDF-include-files>
setenv LIB_NETCDF <path-to-NetCDF-library-files>
gmake
The process will create a file called "Depends" which has the dependencies
for the build of each file on other files.
By default some codes may be compiled non-optimized
so that you can use the debugger, and with bounds-checking, and float trapping on.
To speed up do the following...
gmake OPT=TRUE (by default already on for interpinic and mksurfdata_map)
Also some of the tools allow for OpenMP shared memory parallelism
(such as interpinic and mksurfdata) with
gmake SMP=TRUE
To run a program with a namelist:
./program < namelist
To get help on running a program with command line options (e.g., interpinic):
./program
To run a program built with SMP=TRUE:
setenv OMP_NUM_THREADS=<number_of_threads_to_use>
run normally as above
III. Process sequence to create input datasets needed to run CLM
NOTE: The following assumes you want to create files for CLM4.5. If you want to
use CLM4.0, you will need to do the following:
- In the following commands, change references to the clm4_5 directory to clm4_0
- Add the option '-p clm4_0' to the mkmapdata.sh command.
1.) Create SCRIP grid files (if needed)
a.) For standard resolutions these files will already be created. (done)
b.) To create regular lat-lon regional/single-point grids run mknoocnmap.pl
This will create both SCRIP grid files and a mapping file that will
be valid if the region includes NO ocean whatsoever (so you can skip step 2).
You can also use this script to create SCRIP grid files for a region
(or even a global grid) that DOES include ocean if you use step 2 to
create mapping files for it (simply discard the non-ocean map created by
this script).
Example, for single-point over Boulder Colorado.
cd shared/mkmapdata
./mknoocnmap.pl -p 40,255 -n 1x1_boulderCO
c.) To convert from CLM or CAM grid files
To convert CLM grid files or CAM grid files to SCRIP grid files use
the deprecated mkgriddata program if you have to.
d.) General case
You'll need to convert or create SCRIP grid files on your own (using scripts
or other tools) for the general case where you have an unstructured grid, or
a grid that is not regular in latitude and longitude.
example format
==================
netcdf fv1.9x2.5_090205 {
dimensions:
grid_size = 13824 ;
grid_corners = 4 ;
grid_rank = 2 ;
variables:
double grid_center_lat(grid_size) ;
grid_center_lat:units = "degrees" ;
double grid_center_lon(grid_size) ;
grid_center_lon:units = "degrees" ;
double grid_corner_lat(grid_size, grid_corners) ;
grid_corner_lat:units = "degrees" ;
double grid_corner_lon(grid_size, grid_corners) ;
grid_corner_lon:units = "degrees" ;
int grid_dims(grid_rank) ;
int grid_imask(grid_size) ;
grid_imask:units = "unitless" ;
2.) Create ocean to atmosphere mapping file (if needed)
a.) Standard resolutions (done)
If this is a standard resolution with a standard ocean resolution -- this
step is already done, the files already exist.
b.) Region without Ocean (done in step 1.b)
IF YOU RAN mknoocnmap.pl FOR A REGION WITHOUT OCEAN THIS STEP IS ALREADY DONE.
c.) New atmosphere or ocean resolution
If the region DOES include ocean, use gen_domain/gen_maps.sh to create a
mapping file for it.
Example:
cd shared/gen_domain
./gen_maps.sh -focn <ocngrid> -fatm <atmgrid> -nocn <ocnname> -natm <atmname>
3.) Add SCRIP grid file(s) created in (1) into XML database in CLM (optional)
See the "Adding New Resolutions or New Files to the build-namelist Database"
Chapter in the CLM User's Guide
http://www.cesm.ucar.edu/models/cesm1.0/clm/models/lnd/clm/doc/UsersGuide/book1.html
If you don't do this step, you'll need to specify the file to mkmapdata
in step (3) using the "-f" option.
4.) Create mapping files for use by mksurfdata_map with mkmapdata
(See mkmapdata/README for more help on doing this)
- this step uses the results of (1) that were entered into the XML database
by step (3). If you don't enter datasets in, you need to specify the
SCRIP grid file using the "-f" option to mkmapdata.sh.
- note that mkmapdata generates maps for CLM4.5 by default; to generate
mapping files for CLM4.0, add the option '-p clm4_0'
Example: to generate all necessary mapping files for the ne30np4 grid
cd shared/mkmapdata
./mkmapdata.sh -r ne30np4
5.) Add mapping file(s) created in step (4) into XML database in CLM (optional)
See notes on doing this in step (3) above.
Edit ../bld/namelist_files/namelist_defaults_clm.xml to incorporate new
mapping files.
If you don't do this step, you'll need to specify the grid resolution name
and file creation dates to mksurfdata_map in step (5) below.
6.) Convert map of ocean to atm for use by DATM and CLM with gen_domain
(See mapping/README for more help on doing this)
- gen_domain uses the map from step (2) (or previously created CESM maps)
Example:
cd ../../../../mapping/src
gmake
cd ..
setenv CDATE 090206
setenv OCNGRIDNAME gx1v6
setenv ATMGRIDNAME fv1.9x2.5
setenv MAPFILE $CSMDATA/cpl/cpl6/map_${OCNGRIDNAME}_to_${ATMGRIDNAME}_aave_da_${CDATE}.nc
./gen_domain -m $MAPFILE -o $OCNGRIDNAME -l $ATMGRIDNAME
Normally for I compsets running CLM only you will discard the ocean domain
file, and only use the atmosphere domain file for datm and as the fatmlndfrc
file for CLM. Output domain files will be named according to the input OCN/LND
gridnames.
7.) Create surface datasets with mksurfdata_map
(See mksurfdata_map/README for more help on doing this)
- Run clm4_5/mksurfdata_map/mksurfdata.pl
- This step uses the results of step (4) entered into the XML database
in step (5).
- If datasets were NOT entered into the XML database, set the resolution
to "usrspec" and use the "-usr_gname", and "-usr_gdate" options.
Example: for 0.9x1.25 resolution
cd clm4_5/mksurfdata_map/src
gmake
cd ..
./mksurfdata.pl -r 0.9x1.25
NOTE that surface dataset will be used by default for fatmgrid - and it will
contain the lat,lon,edges and area values for the atm grid - ASSUMING that
the atm and land grid are the same
8.) Interpolate initial conditions using interpinic (optional)
(See interpinic/README for more help on doing this)
9.) Add new files to XML data or using user_nl_clm (optional)
See notes on doing this in step (3) above.
IV. Example of creating single-point datasets without entering into XML database.
Here we apply the process described in III. for a single-point dataset
where we don't enter the datasets into the XML database (thus skipping
steps 3, 5 and 9), but use the needed command line options to specify where the
files are. This also skips step (2) since step 1 creates the needed mapping file.
We also skip step (8) and do NOT create a finidat file.
0.) Set name of grid to use and the creation date to be used later...
setenv GRIDNAME 1x1_boulderCO
setenv CDATE `date +%y%m%d`
1.) SCRIP grid and atm to ocn mapping file
cd shared/mkmapdata
./mknoocnmap.pl -p 40,255 -n $GRIDNAME
# Set pointer to MAPFILE that will be used in step (6)
setenv MAPFILE `pwd`/map_${GRIDNAME}_noocean_to_${GRIDNAME}_nomask_aave_da_${CDATE}.nc
cd ../..
2.) skip
3.) skip
4.) Mapping files needed for mksurfdata_map
cd shared/mkmapdata
setenv GRIDFILE ../mkmapgrids/SCRIPgrid_${GRIDNAME}_nomask_${CDATE}.nc
./mkmapdata.sh -r $GRIDNAME -f $GRIDFILE -t regional
cd ..
5.) skip
6.) Generate domain file for datm and CLM
cd ../../../../../../mapping/src
gmake
cd ..
setenv OCNDOM domain.ocn_noocean.nc
setenv ATMDOM domain.lnd.{$GRIDNAME}_noocean.nc
./gen_domain -m $MAPFILE -o $OCNDOM -l $ATMDOM
7.) Create surface dataset for CLM
cd clm4_5/mksurfdata_map/src
gmake
cd ..
./mksurfdata.pl -r usrspec -usr_gname $GRIDNAME -usr_gdate $CDATE
8.) skip
9.) skip
V. Notes on which input datasets are needed for CLM
global or regional/single-point grids
- need fsurdata and fatmlndfrc
fsurdata ---- from mksurfdata_map in step (III.7)
fatmlndfrc -- use the domain.lnd file from gen_domain in step (III.6)
![swh spinner](/static/img/swh-spinner.gif)
Computing file changes ...