| 6e23389 | Adrian Bunk | 28 June 2006, 16:54:33 UTC | [PATCH] PCI: poper prototype for arch/i386/pci/pcbios.c:pcibios_sort() This patch adds a proper prototype for pcibios_sort() in arch/i386/pci/pci.h. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 12 July 2006, 23:05:48 UTC |
| a969888 | Greg Kroah-Hartman | 12 July 2006, 04:22:58 UTC | [PATCH] USB: move usb-serial.h to include/linux/usb/ USB serial outside of the kernel tree can not build properly due to usb-serial.h being buried down in the source tree. This patch moves the location of the file to include/linux/usb and fixes up all of the usb serial drivers to handle the move properly. Cc: Sergei Organov <osv@javad.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 12 July 2006, 23:03:25 UTC |
| 166ffcc | Luiz Fernando N. Capitulino | 11 July 2006, 17:19:25 UTC | [PATCH] USB: Anydata: Fixes wrong URB callback. Anydata is using usb_serial_generic_write_bulk_callback() for its read URB, but it should use usb_serial_generic_read_bulk_callback() instead (it's a read URB, isn't it?). Reported by Jon K Hellan <hellan@acm.org>. Signed-off-by: Luiz Fernando N. Capitulino <lcapitulino@mandriva.com.br> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 12 July 2006, 23:03:25 UTC |
| a353678 | David Brownell | 06 July 2006, 22:48:53 UTC | [PATCH] USB: gadget section fixups Recent section changes broke gadget builds on some platforms. This patch is the best fix that's available until better section markings exist: - There's a lot of cleanup code that gets used in both init and exit paths; stop marking it as "__exit". (Best fix for this would be an "__init_or_exit" section marking, putting the cleanup in __init when __exit sections get discarded else in __exit.) - Stop marking the use-once probe routines as "__init" since references to those routines are not allowed from driver structures. They're now marked "__devinit", which in practice is a net lose. (Best fix for this is likely to separate such use-once probe routines from the driver structure ... but in general, all busses that aren't hotpluggable will be forced to waste memory for all probe-only code.) In general these broken section rules waste an average of two to four kBytes per driver of code bloat ... because none of the relevant code can ever be reused after module initialization. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 12 July 2006, 23:03:24 UTC |
| 5501a48 | Phil Dibowitz | 04 July 2006, 19:46:43 UTC | [PATCH] USB: another unusual device Please add the attached device to unusual_devs.h. Signed-off-by: Phil Dibowitz <phil@ipom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 12 July 2006, 23:03:24 UTC |
| e1979fe | Colin Leroy | 11 July 2006, 09:36:43 UTC | [PATCH] USB: Add one VID/PID to ftdi_sio This patch adds the Testo USB interface to the list of devices recognized by the ftdi_sio module. This device is based on a FT232BL chip, and is used as an interface to get data from digital sensors (thermometer, etc). See http://www.testo.com/ Signed-off-by: Colin Leroy <colin@colino.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 12 July 2006, 23:03:24 UTC |
| 7e3bd12 | Lars Jacob | 10 July 2006, 15:53:58 UTC | [PATCH] USB: unusual_devs entry for Sony DSC-H5 This patch (as749) extends the unusual_devs entry for the Sony DSC-T1 and T5 to cover the H5 as well. From: Lars Jacob <jacob.lars@googlemail.com> Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 12 July 2006, 23:03:24 UTC |
| 57b01b1 | Alan Stern | 10 July 2006, 15:51:12 UTC | [PATCH] USB: unusual_devs entry for Nokia E61 This patch (as748) adds an unusual_devs entry for the Nokia E61 mobile phone. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 12 July 2006, 23:03:24 UTC |
| 9a01355 | Alan Stern | 07 July 2006, 17:45:13 UTC | [PATCH] USB: unusual_devs entry for Nokia N91 This patch (as745) adds an unusual_devs entry for the Nokia N91, just like the entry for the N80 added a couple of weeks ago. Apparently Nokia isn't using very good firmware these days... Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 12 July 2006, 23:03:24 UTC |
| b6c2799 | Dan Streetman | 05 July 2006, 23:17:27 UTC | [PATCH] USB: add ZyXEL vendor/product ID to rtl8150 driver I just got a "ZyXEL Prestige USB Adapter" that is actually RTL8150 adapter. Here is the relevant /proc/bus/usb/devices output (after adding the vendor/product IDs to the driver): T: Bus=01 Lev=02 Prnt=02 Port=02 Cnt=02 Dev#=119 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=0586 ProdID=401a Rev= 1.00 S: Manufacturer=ZyXEL S: Product=Prestige USB Adapter S: SerialNumber=1027 C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=120mA I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=ff Driver=rtl8150 E: Ad=81(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=83(I) Atr=03(Int.) MxPS= 8 Ivl=1ms This patch adds the ZyXEL vendor ID to the rtl8150.c driver. The device has absolutely no identifying marks on the outside for model type, just a serial number, and I can't find anything on ZyXEL's website, so I called the product ID PRODUCT_ID_PRESTIGE to match the product string. Signed-off-by: Dan Streetman <ddstreet@ieee.org> Acked-by: <petkan@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 12 July 2006, 23:03:24 UTC |
| e37de9e | Matthias Urlichs | 06 July 2006, 11:12:53 UTC | [PATCH] USB: Option driver: new product ID Yet another "same name, somewhat different hardware" product. Signed-Off-By: Matthias Urlichs <smurf@smurf.noris.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 12 July 2006, 23:03:23 UTC |
| b857c65 | Navaho Gunleg | 30 June 2006, 07:44:03 UTC | [PATCH] USB: add support for WiseGroup., Ltd SmartJoy Dual PLUS Adapter This patch is to get the WiseGroup.,Ltd SmartJoy Dual Plus PS2-to-USB Adapter [0x6677:0x8802] correctly detected. It sets the NOGET and MULTI_INPUT quirks to make 2 joystick nodes appear in stead of only one. (As of yet, only confirmed working by myself.) Signed-off-by: Navaho Gunleg <navahogunleg@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 12 July 2006, 23:03:23 UTC |
| b2f1b0d | Bart Oldeman | 02 July 2006, 03:07:10 UTC | [PATCH] USB: ipw.c driver fix The below patch fixes the ipw module in kernel 2.6.17 for me; without this change it simply does not work at all (all but the first writes are refused because write_urb_busy is always 1). This problem was there in 2.6.15 as well, but at that point I used the (updated) ipw.c, version 0.4, from http://www.neology.co.za/products/opensource/ipwireless/ which no longer compiles with 2.6.17. It can be made to after a few changes but obviously it's easier if the built-in ipw driver works instead of having to download one from the neology site. From: Bart Oldeman <bartoldeman@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 12 July 2006, 23:03:23 UTC |
| 49e523b | Michal Piotrowski | 03 July 2006, 12:20:39 UTC | [PATCH] USB: remove devfs information from Kconfig Devfs is gone. We can remove that information. Signed-off-by: Michal Piotrowski <michal.k.k.piotrowski@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 12 July 2006, 23:03:23 UTC |
| 028d2a3 | Christoph Lameter | 30 June 2006, 09:34:47 UTC | [PATCH] USB: remove empty destructor from drivers/usb/mon/mon_text.c Remove destructor and call kmem_cache_create with NULL for the destructor. Acked-by: Pekka Enberg <penberg@cs.helsinki.fi> Signed-off-by: Christoph Lameter <clameter@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Cc: Pete Zaitcev <zaitcev@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 12 July 2006, 23:03:23 UTC |
| b33488e | Frank Gevaerts | 30 June 2006, 09:34:45 UTC | [PATCH] USB: ipaq.c timing parameters Adds configurable waiting periods to the ipaq connection code. These are not needed when the pocketpc device is running normally when plugged in, but they need extra delays if they are physically connected while rebooting. There are two parameters : * initial_wait : this is the delay before the driver attemts to start the connection. This is needed because the pocktpc device takes much longer to boot if the driver starts sending control packets too soon. * connect_retries : this is the number of times the control urb is retried before finally giving up. The patch also adds a 1 second delay between retries. I'm not sure if the cases where this patch is useful are general enough to include this in the kernel. Signed-off-by: Frank Gevaerts <frank.gevaerts@fks.be> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 12 July 2006, 23:03:23 UTC |
| b512504 | Frank Gevaerts | 30 June 2006, 09:34:44 UTC | [PATCH] USB: ipaq.c bugfixes This patch fixes several problems in the ipaq.c driver with connecting and disconnecting pocketpc devices: * The read urb stayed active if the connect failed, causing nullpointer dereferences later on. * If a write failed, the driver continued as if nothing happened. Now it handles that case the same way as other usb serial devices (fix by Luiz Fernando N. Capitulino <lcapitulino@mandriva.com.br>) Signed-off-by: Frank Gevaerts <frank.gevaerts@fks.be> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 12 July 2006, 23:03:23 UTC |
| b972b68 | David Brownell | 30 June 2006, 09:34:42 UTC | [PATCH] USB: ehci: fix bogus alteration of a local variable In a rare and all-but-unused path, the EHCI driver could reuse a variable in a way that'd make trouble. Specifically, if the first root hub port gets an overcurrent event (rare) during a remote wakeup scenario (all but unused in today's Linux, except for folk working with suspend-to-RAM and similar sleep states), that would look like a fatal error which would shut down the controller. Fix by not reusing that variable. Spotted by Per Hallsmark <saxofon@musiker.nu> Fixes http://bugzilla.kernel.org/show_bug.cgi?id=6661 Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 12 July 2006, 23:03:23 UTC |
| 69de51f | Kevin Lloyd | 30 June 2006, 18:17:55 UTC | [PATCH] USB: add driver for non-composite Sierra Wireless devices This patch creates a new driver, sierra.c, that supports the new non-composite Sierra Wireless WWAN devices. The older Sierra Wireless and Airprime devices are supported in airprime.c. Signed-off-by: Kevin Lloyd <linux@sierrawireless.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 12 July 2006, 23:03:23 UTC |
| 053be30 | Eric Sesterhenn | 26 June 2006, 22:57:42 UTC | [PATCH] USB: fix pointer dereference in drivers/usb/misc/usblcd coverity spotted (id #185) that we still use urb, if the allocation fails in the error path. This patch fixes this by returning directly. Signed-off-by: Eric Sesterhenn <snakebyte@gmx.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 12 July 2006, 23:03:23 UTC |
| c1b45f2 | Kyle McMartin | 25 June 2006, 22:45:29 UTC | [PATCH] USB: Kill compiler warning in quirk_usb_handoff_ohci Move variables only used on !__hppa__ into that #ifndef section. This cleans up a compiler warning on parisc. Problem pointed out by Joel Soete. Signed-off-by: Kyle McMartin <kyle@parisc-linux.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 12 July 2006, 23:03:22 UTC |
| 2246540 | Ian Abbott | 26 June 2006, 11:59:17 UTC | [PATCH] USB serial ftdi_sio: Prevent userspace DoS This patch limits the amount of outstanding 'write' data that can be queued up for the ftdi_sio driver, to prevent userspace DoS attacks (or simple accidents) that use up all the system memory by writing lots of data to the serial port. The original patch was by Guillaume Autran, who in turn based it on the same mechanism implemented in the 'visor' driver. I (Ian Abbott) re-targeted the patch to the latest sources, fixed a couple of errors, renamed his new structure members, and updated the implementations of the 'write_room' and 'chars_in_buffer' methods to take account of the number of outstanding 'write' bytes. It seems to work fine, though at low baud rates it is still possible to queue up an amount of data that takes an age to shift (a job for another day!). Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 12 July 2006, 23:03:22 UTC |
| 00d6058 | Ian Abbott | 26 June 2006, 10:44:22 UTC | [PATCH] USB serial visor: fix race in open/close The anti user-DoS mechanism in the USB serial 'visor' driver can fail in the following way: visor_open: priv->outstanding_urbs = 0 visor_write: ++priv->outstanding_urbs visor_close: visor_open: priv->outstanding_urbs = 0 visor_write_bulk_callback: --priv->outstanding_urbs So priv->outstanding_urbs ends up as (unsigned long)(-1). Not good! I haven't seen this happen with the visor driver as I don't have the hardware, but I have seen it while testing a patch to implement the same functionality in the ftdi_sio driver (patch not yet submitted). The fix is pretty simple: don't reinitialize outstanding_urbs in visor_open. (Again, I haven't tested the fix in visor, but I have tested it in ftdi_sio.) Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 12 July 2006, 23:03:22 UTC |
| 5650b4d | Phil Dibowitz | 25 June 2006, 00:27:54 UTC | [PATCH] USB Storage: Uname in PR/SC Unneeded message This patch adds the kernel version to the usb-storage Protocol/SubClass unneeded message in order to help us troubleshoot such problems. Signed-off-by: Phil Dibowitz <phil@ipom.com> Signed-off-by: Matthew Dharm <mdharm-usb@one-eyed-alien.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 12 July 2006, 23:03:22 UTC |
| 883d989 | Phil Dibowitz | 25 June 2006, 00:27:10 UTC | [PATCH] USB Storage: US_FL_MAX_SECTORS_64 flag This patch adds a US_FL_MAX_SECTORS_64 and removes the Genesys special-cases for this that were in scsiglue.c. It also adds the flag to other devices reported to need it. Signed-off-by: Phil Dibowitz <phil@ipom.com> Signed-off-by: Matthew Dharm <mdharm-usb@one-eyed-alien.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 12 July 2006, 23:03:22 UTC |
| 2030794 | Alan Stern | 28 June 2006, 15:20:41 UTC | [PATCH] usbcore: fixes for hub_port_resume This patch (as731) makes a couple of small fixes to the hub_port_resume routine: Don't return status >= 0 when an error occurs; Clear the port-change-suspend status indicator after resuming a device. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 12 July 2006, 23:03:22 UTC |
| d8840d6 | Ernis | 26 June 2006, 20:02:43 UTC | [PATCH] USB: unusual_devs entry for Samsung MP3 player This patch (as730) contains an unusual_devs entry for a Samsung MP3 device. From: Ernis <ernisv@gmail.com> Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 12 July 2006, 23:03:22 UTC |
| 0ddc063 | Davide Perini | 19 June 2006, 21:07:39 UTC | [PATCH] usb-storage: unusual_devs entry for Motorola RAZR V3x This patch (as725) adds an unusual_devs entry for the Motorola RAZR V3x. From: Davide Perini <perini.davide@dpsoftware.org> Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 12 July 2006, 23:03:22 UTC |
| b40b7a9 | Alan Stern | 19 June 2006, 19:12:38 UTC | [PATCH] USB hub: don't return status > 0 from resume finish_device_resume() in the hub driver isn't careful always to return a negative code in all the error pathways. It also doesn't return 0 in all the success pathways. This patch (as724) fixes the behavior. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 12 July 2006, 23:03:22 UTC |
| eecd11e | Alan Stern | 19 June 2006, 18:50:15 UTC | [PATCH] usb-storage: fix race between reset and disconnect My recent patch converting usb-storage to use usb_reset_composite_device() added a bug, a race between reset and disconnect. It was necessary to drop the private lock while executing a reset, and if a disconnect occurs at that time it will cause a crash. This patch (as722) fixes the problem by explicitly checking for an early termination after executing each command. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 12 July 2006, 23:03:21 UTC |
| 3dd2ae8 | Oliver Neukum | 23 June 2006, 07:14:17 UTC | [PATCH] USB: update for acm in quirks and debug this adds better debugging output & an update of the quirk list to the acm driver Signed-off-by: Oliver Neukum <oliver@neukum.name> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 12 July 2006, 23:03:21 UTC |
| 9189bfc | Oliver Bock | 22 June 2006, 17:04:47 UTC | [PATCH] USB: rename Cypress CY7C63xxx driver to proper name and fix up some tiny things This is a new driver for the Cypress CY7C63xxx mirco controller series. It currently supports the pre-programmed CYC63001A-PC by AK Modul-Bus GmbH. It's based on a kernel 2.4 driver (cyport) by Marcus Maul which I ported to kernel 2.6 using sysfs. I intend to support more controllers of this family (and more features) as soon as I get hold of the required IDs etc. Please see the source code's header for more information. Signed-off-by: Oliver Bock <o.bock@fh-wolfenbuettel.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 12 July 2006, 23:03:21 UTC |
| 58a5b0a | Zoran Marceta | 22 June 2006, 17:28:11 UTC | [PATCH] usbfs: use the correct signal number for disconnection usbfs stores the wrong signal number in the siginfo structure used for notifying user programs about device disconnect. This patch (as726) fixes it. From: Zoran Marceta <Zoran.Marceta@micronasnit.com> Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 12 July 2006, 23:03:21 UTC |
| 3b92847 | Matthew Meno | 21 June 2006, 19:25:53 UTC | [PATCH] USB: Support for Susteen Datapilot Universal-2 cable in pl2303 The Susteen Datapilot cable (http://www.susteen.com/productdetail/71/producthl/Notempty) has an internal pl2303 to communicate with a set of dummy connector-ends that connect to a variety of cell phones. I've found that it works right out of the box by simply adding the product/vendor id to the pl2303 driver. Signed-off-by: Matt Meno <mmeno@idealcorp.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 12 July 2006, 23:03:21 UTC |
| 5b5daf7 | Inaky Perez-Gonzalez | 20 June 2006, 01:19:01 UTC | [PATCH] USB: Add some basic WUSB definitions This patch adds basic Wireless USB 1.0 definitions to usb_ch9.h that fit into the existing set of declarations. Boils down to two new recipients for requests (ports and remote pipes), rpipe reset and abort request codes and wire adapter and remote pipe descriptor types. Wire adapters are the USB <-> Wireless USB adaptors; remote pipes are used by those adapters to pipe the host <-> endpoint traffic. Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 12 July 2006, 23:03:21 UTC |
| bd97c4f | Pete Zaitcev | 21 June 2006, 22:03:40 UTC | [PATCH] USB: fix visor leaks This patch fixes blatant leaks in visor driver and makes it report mode sensible things in ->write_room (this is only needed if your visor is a terminal though). It is made to fit into 80 columns with a temporary variable. Might even save a few instructions... Signed-off-by: Pete Zaitcev <zaitcev@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 12 July 2006, 23:03:21 UTC |
| 34f8e76 | Pete Zaitcev | 21 June 2006, 22:00:45 UTC | [PATCH] USB: fix usb-serial leaks, oopses on disconnect This fix addresses two issues: - Unattached port structures were not freed - My initial fix for crash when eventd runs a work in a freed port did not go far enough Signed-off-by: Pete Zaitcev <zaitcev@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 12 July 2006, 23:03:21 UTC |
| 92164c5 | David Miller | 22 June 2006, 05:26:09 UTC | [PATCH] USB: OHCI hub code unaligned access I noticed this while debugging something unrelated on sparc64. Signed-off-by: David S. Miller <davem@davemloft.net> Acked-by: David Brownell <david-b@pacbell.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 12 July 2006, 23:03:21 UTC |
| c0f8d56 | Christophe Mariac | 23 June 2006, 15:36:21 UTC | [PATCH] USB: new device ids for ftdi_sio driver Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 12 July 2006, 23:03:21 UTC |
| 4843748 | D. Peter Siddons | 17 June 2006, 22:09:15 UTC | [PATCH] USB: new device id for Thorlabs motor driver Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 12 July 2006, 23:03:20 UTC |
| 3d86149 | Peter Moulder | 19 June 2006, 12:47:49 UTC | [PATCH] USB: Addition of vendor/product id pair for pl2303 driver Text from the back of the box, for your information/amusement: USB DATA CABLE FOR K700 Series The USB Cable is an ideal link between your mobile phone and PC. Employing the user-friendiy [sic] USB standard,its capacity for rapid data transfer enables functions such as synchronization of phone book and calendar,as well as Internet browsing via a modem-enabled phone.Autual [sic] connection speed is dependent on phone capacity. MADE IN CHINA From: Peter Moulder <Peter.Moulder@infotech.monash.edu.au> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 12 July 2006, 23:03:20 UTC |
| 7fac9a3 | Randy Dunlap | 22 June 2006, 22:12:41 UTC | [PATCH] USB: fix usb kernel-doc Warning(/var/linsrc/linux-2617-g4//include/linux/usb.h:66): No description found for parameter 'ep_dev' Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 12 July 2006, 23:03:20 UTC |
| a5b7474 | Lennert Buytenhek | 23 June 2006, 21:02:01 UTC | [PATCH] USB: ohci bits for the cirrus ep93xx This patch adds OHCI glue bits for the USB host interface in the Cirrus ep93xx (arm920t) CPU. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Acked-by: David Brownell <david-b@pacbell.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 12 July 2006, 23:03:20 UTC |
| d14feb5 | Daniel Mack | 23 June 2006, 20:36:07 UTC | [PATCH] USB: au1200: EHCI and OHCI fixes I received an DBAU1200 eval kit from AMD a few days ago and tried to enable the USB2 port, but the current linux-2.6 GIT did not even compile with CONFIG_SOC_1200, CONFIG_SOC_AU1X00, CONFIG_USB_EHCI and CONFIG_USB_OHCI set. Furthermore, in ehci-hcd.c, platform_driver_register() was called with an improper argument of type 'struct device_driver *' which of course ended up in a kernel oops. How could that ever have worked on your machines? Anyway, here's a trivial patch that makes the USB subsystem working on my board for both OHCI and EHCI. It also removes the /* FIXME use "struct platform_driver" */. Signed-off-by: Daniel Mack <daniel@caiaq.de> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Acked-by: David Brownell <david-b@pacbell.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 12 July 2006, 23:03:20 UTC |
| 18577a6 | Domen Puncer | 23 June 2006, 10:55:43 UTC | [PATCH] USB: au1xxx: compile fixes for OHCI for au1200 Compile fixes for au1200 ohci. First part looks a bit hackish... but it works for me. Signed-off-by: Domen Puncer <domen.puncer@ultra.si> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 12 July 2006, 23:03:20 UTC |
| 5cab828 | Hans de Goede | 05 July 2006, 16:09:09 UTC | [PATCH] hwmon: Documentation update for abituguru Documentation update for the new bank1_types module param. Also add what we know about different revisions of the uGuru and a note that the abituguru driver unfortunatly does not work with the latest and greatest motherboards, which have what I think is revision 4 of the uGuru. Signed-off-by: Hans de Goede <j.w.r.degoede@hhs.nl> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 12 July 2006, 22:43:08 UTC |
| 9b2ad12 | Hans de Goede | 05 July 2006, 16:07:49 UTC | [PATCH] hwmon: Fix for first generation Abit uGuru chips Now that the abituguru driver is seeing some more widespread testing it has turned out that one the first generation of Abit uGuru motherboards, with uGuru revision 1, the autodetect bank1 sensor type code doesn't (always) work. This patch adds a module param to override the autodetect, and it adds validity checks for the value of the 2 other autodetection override module params. An example of howto use the new param can be found here: http://lm-sensors.org/wiki/Configurations/Abit/AN7 Signed-off-by: Hans de Goede <j.w.r.degoede@hhs.nl> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 12 July 2006, 22:43:07 UTC |
| 1392707 | Charles Spirakis | 05 July 2006, 16:05:15 UTC | [PATCH] hwmon: New maintainer for w83791d Add Charles Spirakis as the maintainer for the w83791d sensor chip driver. Signed-off-by: Charles Spirakis <bezaur@gmail.com> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 12 July 2006, 22:43:07 UTC |
| 50436a4 | Ben Gardner | 01 July 2006, 15:22:18 UTC | [PATCH] pca9539: Honor the force parameter The pca9539 driver doesn't honor the force parameter; it always does detection. This patch will skip detection if forced. Signed-off-by: Ben Gardner <gardner.ben@gmail.com> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 12 July 2006, 22:43:07 UTC |
| 5313775 | Uwe Bugla | 01 July 2006, 15:25:08 UTC | [PATCH] i2c-algo-bit: Wipe out dead code i2c-algo-bit: Wipe out dead code Signed-off-by: Uwe Bugla <uwe.bugla@gmx.de> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 12 July 2006, 22:43:07 UTC |
| b39ad0c | Mark M. Hoffman | 01 July 2006, 15:16:06 UTC | [PATCH] i2c: Handle i2c_add_adapter failure in i2c algorithm drivers Content-Disposition: inline; filename=i2c-algo-error-handling-fix.patch It is possible for i2c_add_adapter() to fail. Several I2C algorithm drivers ignore that fact. This (compile-tested only) patch fixes them. Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 12 July 2006, 22:43:07 UTC |
| 5d925fe | Jean Delvare | 01 July 2006, 15:14:32 UTC | [PATCH] i2c: New mailing list We have a new mailing list dedicated to linux i2c: http://lists.lm-sensors.org/mailman/listinfo/i2c Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 12 July 2006, 22:43:07 UTC |
| 5a01748 | Jean Delvare | 01 July 2006, 15:13:37 UTC | [PATCH] i2c-ite: Plan for removal Plan the i2c-ite and i2c-algo-ite drivers for removal. These drivers never compiled since they were added to the kernel tree 5 years ago. Also see: http://marc.theaimsgroup.com/?l=linux-mips&m=115040510817448 Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 12 July 2006, 22:43:07 UTC |
| 8ced8ee | Jean Delvare | 01 July 2006, 15:12:53 UTC | [PATCH] i2c-powermac: Fix master_xfer return value Fix the value returned by the i2c-powermac's master_xfer method. It should return the number of messages processed successfully, but instead returns the number of data bytes in the first (and only) processed message. Also explicitly mention the master_xfer convention so that future implementations get it right directly. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 12 July 2006, 22:43:07 UTC |
| c3efaca | Jean Delvare | 01 July 2006, 15:06:43 UTC | [PATCH] scx200_acb: Fix the block transactions The scx200_acb i2c bus driver pretends to support SMBus block transactions, but in fact it implements the more simple I2C block transactions. Additionally, it lacks sanity checks on the length of the block transactions, which could lead to a buffer overrun. This fixes an oops reported by Alexander Atanasov: http://marc.theaimsgroup.com/?l=linux-kernel&m=114970382125094 Thanks to Ben Gardner for fixing my bugs :) Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 12 July 2006, 22:43:06 UTC |
| fd627a0 | Thomas Andrews | 01 July 2006, 15:05:12 UTC | [PATCH] scx200_acb: Fix the state machine Fix the scx200_acb state machine: * Nack was sent one byte too late on reads >= 2 bytes. * Stop bit was set one byte too late on reads. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 12 July 2006, 22:43:06 UTC |
| 39288e1 | Peter Milne | 01 July 2006, 15:03:20 UTC | [PATCH] i2c-iop3xx: Avoid addressing self Avoid addressing self when sending a slave address. Follows instruction in Intel 80331/80321 manuals. Ignoring this worked previously on 80321, but causes a hang on i2cdetect on 80331. Signed-off-by: Peter Milne <peter.milne@d-tacq.com> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 12 July 2006, 22:43:06 UTC |
| 2369df9 | Mark M. Hoffman | 01 July 2006, 15:01:59 UTC | [PATCH] i2c: Fix 'ignore' module parameter handling in i2c-core This patch fixes a bug in the handling of 'ignore' module parameters of I2C client drivers. Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 12 July 2006, 22:43:06 UTC |
| 22e1170 | Stephen Hemminger | 12 July 2006, 22:23:48 UTC | [PATCH] sky2: optimize receive restart When the driver handles multiple packets per NAPI poll, it is better to reload the receive ring, then tell the hardware. Otherwise, under packet storm with flow control, the driver/hardware will degrade down to one packet getting through per pause-exchange. Likewise on transmit, don't wakeup until a little more than minimum ring space is available. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org> | 12 July 2006, 22:39:22 UTC |
| afa195d | Stephen Hemminger | 12 July 2006, 22:23:47 UTC | [PATCH] sky2: PHY power on delays The documentation says we need to wait after turning on the PHY. Also, don't enable WOL by default. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org> | 12 July 2006, 22:39:21 UTC |
| 6a5706b | Stephen Hemminger | 12 July 2006, 22:23:46 UTC | [PATCH] sky2: NAPI suspend/resume of dual port cards The changes to handle suspend/resume didn't handle the case where a dual port card has the first port down, but the second is running. In this driver, all NAPI polling is done on the primary port. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org> | 12 July 2006, 22:39:21 UTC |
| 5913952 | Stephen Hemminger | 12 July 2006, 22:23:45 UTC | [PATCH] sky2: sky2_reset section mismatch Since sky2_reset gets call from sky2_resume it shouldn't be tagged with devinit. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org> | 12 July 2006, 22:39:21 UTC |
| f326fe7 | Stephen Hemminger | 12 July 2006, 22:23:44 UTC | [PATCH] sk98lin: fix truncated collision threshold mask Patch to correct broken collision threshold mask in (same problem as sky2 driver). Should be three bits wide, but the mask only allows for 1 bit to be set. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org> | 12 July 2006, 22:39:21 UTC |
| 83405f0 | Stephen Hemminger | 12 July 2006, 22:23:43 UTC | [PATCH] skge: fix truncated collision threshold mask Patch to correct broken collision threshold mask in (same problem as sky2 driver). Should be three bits wide, but the mask only allows for 1 bit to be set. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org> | 12 July 2006, 22:39:21 UTC |
| fbb88b3 | Stephen Hemminger | 12 July 2006, 22:23:42 UTC | [PATCH] sky2: fix truncated collision threshold mask Patch to correct broken collision threshold mask in sky2 driver. Should be three bits wide, but the mask only allows for 1 bit to be set. Thanks & Regards Neil Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: Stephen Hemminger <shemminger@osdl.org> sky2.h | 2 +- 1 files changed, 1 insertion(+), 1 deletion(-) Signed-off-by: Jeff Garzik <jeff@garzik.org> | 12 July 2006, 22:39:21 UTC |
| f01cfb3 | Adrian Bunk | 28 June 2006, 17:05:31 UTC | [PATCH] w1: remove drivers/w1/w1.h drivers/w1/w1_io.h is both a subset of drivers/w1/w1.h and no longer #include'd by any file. This patch therefore removes w1_io.h. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Evgeniy Polyakov <johnpol@2ka.mipt.ru> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 12 July 2006, 22:38:28 UTC |
| b4786f1 | Ben Gardner | 29 June 2006, 18:33:22 UTC | [PATCH] w1: fix idle check loop in ds2482 The idle check loop has a greater-than where it should have a less-than. This causes the ds2482 driver to check for the idle condition exactly once, which causes it to fail on faster machines. Signed-off-by: Ben Gardner <gardner.ben@gmail.com> Signed-off-by: Evgeniy Polyakov <johnpol@2ka.mipt.ru> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 12 July 2006, 22:38:27 UTC |
| 4e35dea | Evgeniy Polyakov | 19 June 2006, 05:59:02 UTC | [PATCH] W1: remove w1 mail list from lm_sensors. lm_sensors mail list is going to be splitted into separate subdev lists, so remove w1 from there. http://lists.lm-sensors.org/pipermail/lm-sensors/2006-June/016507.html Signed-off-by: Evgeniy Polyakov <johnpol@2ka.mipt.ru> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 12 July 2006, 22:38:27 UTC |
| fd1278d | Marcel Holtmann | 12 July 2006, 21:00:07 UTC | [Bluetooth] Fix deadlock in the L2CAP layer The Bluetooth L2CAP layer has 2 locks that are used in softirq context, (one spinlock and one rwlock, where the softirq usage is readlock) but where not all usages of the lock were _bh safe. The patch below corrects this. Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> | 12 July 2006, 22:34:35 UTC |
| 0263603 | Marcel Holtmann | 12 July 2006, 20:57:52 UTC | [Bluetooth] Let BT_HIDP depend on INPUT This patch lets BT_HIDP depend on instead of select INPUT. This fixes the following warning during an s390 build: net/bluetooth/hidp/Kconfig:4:warning: 'select' used by config symbol 'BT_HIDP' refer to undefined symbol 'INPUT' A dependency on INPUT also implies !S390 (and therefore makes the explicit dependency obsolete) since INPUT is not available on s390. The practical difference should be nearly zero, since INPUT is always set to y unless EMBEDDED=y (or S390=y). Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> | 12 July 2006, 22:34:33 UTC |
| 420cc35 | Marcel Holtmann | 06 July 2006, 13:53:31 UTC | [Bluetooth] Avoid NULL pointer dereference with tty->driver This patch checks for tty->driver before trying to call flush_buffer(). Signed-off-by: Marcel Holtmann <marcel@holtmann.org> | 12 July 2006, 22:34:30 UTC |
| 25ea6db | Marcel Holtmann | 06 July 2006, 13:40:09 UTC | [Bluetooth] Remaining transitions to use kzalloc() This patch makes the remaining transitions to use kzalloc(). Signed-off-by: Marcel Holtmann <marcel@holtmann.org> | 12 July 2006, 22:34:28 UTC |
| 4c2248c | Brice Goglin | 10 July 2006, 01:10:18 UTC | [PATCH] myri10ge return value fix Andrew Morton wrote: > All these functions return error codes, and we're not checking them. We > should. So there's a patch which marks all these things as __must_check, > which causes around 1,500 new warnings. > The following patch fixes such a warning in myri10ge. Check pci_enable_device() return value in myri10ge_resume(). Signed-off-by: Brice Goglin <brice@myri.com> Signed-off-by: Jeff Garzik <jeff@garzik.org> | 12 July 2006, 21:44:11 UTC |
| 8431adf | Deepak Saxena | 12 July 2006, 06:02:48 UTC | [PATCH] Update smc91x driver with ARM Versatile board info We need to specify a Versatile-specific SMC_IRQ_FLAGS value or the new generic IRQ layer will complain thusly: No IRQF_TRIGGER set_type function for IRQ 25 (<NULL>) Signed-off-by: Deepak Saxena <dsaxena@plexity.net> Signed-off-by: Jeff Garzik <jeff@garzik.org> | 12 July 2006, 21:42:40 UTC |
| 709cf01 | Auke Kok | 10 July 2006, 15:51:43 UTC | [PATCH] ixgb: fix tx unit hang - properly calculate desciptor count There were some tso bugs that only showed up with heavy load and 16kB pages that this patch fixes by making the driver's internal use count of descriptors match the count that it was estimating it needed using the DESC_NEEDED macro. This bug caused NETDEV_WATCHDOG resets aka tx timeouts. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org> | 12 July 2006, 21:42:40 UTC |
| c5d965c | Dmitry Torokhov | 07 July 2006, 06:58:27 UTC | [PATCH] smsc-ircc2: fix section reference mismatches subsystem_configurations array is only used by an __init function, therefore it should be marked __initdata, not __devinitdata. Signed-off-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org> | 12 July 2006, 21:42:40 UTC |
| 4626dd4 | Andrew Morton | 07 July 2006, 06:58:26 UTC | [PATCH] 8139cp.c printk fix drivers/net/8139cp.c: In function 'cp_init_one': drivers/net/8139cp.c:1919: warning: format '%lx' expects type 'long unsigned int', but argument 4 has type 'resource_size_t' drivers/net/8139cp.c:1919: warning: format '%lx' expects type 'long unsigned int', but argument 5 has type 'resource_size_t' Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org> | 12 July 2006, 21:42:40 UTC |
| e6a8fee | Ananda Raju | 07 July 2006, 06:58:23 UTC | [PATCH] s2io driver irq fix Modification and bug fixes with respect to irq registration. - Enable interrupts after request_irq - Restored MSI data register value at driver unload time Signed-off-by: Ananda Raju <ananda.raju@neterion.com> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org> | 12 July 2006, 21:42:40 UTC |
| 61ef5c0 | Andrew Morton | 07 July 2006, 06:58:19 UTC | [PATCH] e1000: irq naming update Use the new names. Cc: Auke Kok <auke-jan.h.kok@intel.com> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org> | 12 July 2006, 21:42:39 UTC |
| 7d450e0 | Jeff Garzik | 12 July 2006, 21:40:45 UTC | Merge branch 'upstream-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6 into upstream-fixes | 12 July 2006, 21:40:45 UTC |
| 95d161c | Ayaz Abdulla | 06 July 2006, 20:46:25 UTC | [PATCH] forcedeth: watermark fixup This patch defines the watermark registers and fixes up the use of this register. Signed-Off-By: Ayaz Abdulla <aabdulla@nvidia.com> Signed-off-by: Jeff Garzik <jeff@garzik.org> | 12 July 2006, 21:38:20 UTC |
| 9744e21 | Ayaz Abdulla | 06 July 2006, 20:45:58 UTC | [PATCH] forcedeth: deferral fixup This patch adds the definition for the deferral registers and fixes up the use of these registers. Signed-Off-By: Ayaz Abdulla <aabdulla@nvidia.com> Signed-off-by: Jeff Garzik <jeff@garzik.org> | 12 July 2006, 21:38:20 UTC |
| c2ce920 | Krzysztof Halasa | 12 July 2006, 20:46:12 UTC | [WAN]: converting generic HDLC to use netif_dormant*() This patch converts generic HDLC (and WAN drivers using it) from hdlc_set_carrier() to netif_dormant*() interface. WAN hardware drivers should now use netif_carrier_on|off() like other network drivers. Signed-off-by: Krzysztof Halasa <khc@pm.waw.pl> Signed-off-by: David S. Miller <davem@davemloft.net> | 12 July 2006, 20:59:06 UTC |
| b47b2ec | Herbert Xu | 12 July 2006, 20:29:56 UTC | [IPV4]: Fix error handling for fib_insert_node call The error handling around fib_insert_node was broken because we always zeroed the error before checking it. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net> | 12 July 2006, 20:59:04 UTC |
| 4b260a9 | Ralf Baechle | 12 July 2006, 20:26:26 UTC | [NETROM] lockdep: fix false positive NETROM network devices are virtual network devices encapsulating NETROM frames into AX.25 which will be sent through an AX.25 device, so form a special "super class" of normal net devices; split their locks off into a separate class since they always nest. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: David S. Miller <davem@davemloft.net> | 12 July 2006, 20:59:02 UTC |
| b1d21ca | Ralf Baechle | 12 July 2006, 20:25:56 UTC | [ROSE] lockdep: fix false positive ROSE network devices are virtual network devices encapsulating ROSE frames into AX.25 which will be sent through an AX.25 device, so form a special "super class" of normal net devices; split their locks off into a separate class since they always nest. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: David S. Miller <davem@davemloft.net> | 12 July 2006, 20:58:59 UTC |
| c19c4b9 | Ralf Baechle | 12 July 2006, 20:25:23 UTC | [AX.25]: Optimize AX.25 socket list lock Right now all uses of the ax25_list_lock lock are _bh locks but knowing some code is only ever getting invoked from _bh context we can better. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: David S. Miller <davem@davemloft.net> | 12 July 2006, 20:58:57 UTC |
| da95231 | Herbert Xu | 11 July 2006, 20:50:09 UTC | [IPCOMP]: Fix truesize after decompression The truesize check has uncovered the fact that we forgot to update truesize after pskb_expand_head. Unfortunately pskb_expand_head can't update it for us because it's used in all sorts of different contexts, some of which would not allow truesize to be updated by itself. So the solution for now is to simply update it in IPComp. This patch also changes skb_put to __skb_put since we've just expanded tailroom by exactly that amount so we know it's there (but gcc does not). Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net> | 12 July 2006, 20:58:55 UTC |
| 8a6ce0c | YOSHIFUJI Hideaki | 11 July 2006, 20:05:30 UTC | [IPV6]: Use ipv6_addr_src_scope for link address sorting. In the source address selection, the address must be sorted from global to node-local. But, ifp->scope is different from the scope for source address selection. 2001::1 fe80::1 ::1 ifp->scope 0 0x02 0x01 ipv6_addr_src_scope(&ifp->addr) 0x0e 0x02 0x01 So, we need to use ipv6_addr_src_scope(&ifp->addr) for sorting. And, for backward compatibility, addresses should be sorted from new one to old one. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Acked-by: Brian Haley <brian.haley@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 12 July 2006, 20:58:53 UTC |
| 6150c22 | Xiaoliang (David) Wei | 11 July 2006, 20:03:28 UTC | [TCP] tcp_highspeed: Fix AI updates. I think there is still a problem with the AIMD parameter update in HighSpeed TCP code. Line 125~138 of the code (net/ipv4/tcp_highspeed.c): /* Update AIMD parameters */ if (tp->snd_cwnd > hstcp_aimd_vals[ca->ai].cwnd) { while (tp->snd_cwnd > hstcp_aimd_vals[ca->ai].cwnd && ca->ai < HSTCP_AIMD_MAX - 1) ca->ai++; } else if (tp->snd_cwnd < hstcp_aimd_vals[ca->ai].cwnd) { while (tp->snd_cwnd > hstcp_aimd_vals[ca->ai].cwnd && ca->ai > 0) ca->ai--; In fact, the second part (decreasing ca->ai) never decreases since the while loop's inequality is in the reverse direction. This leads to unfairness with multiple flows (once a flow happens to enjoy a higher ca->ai, it keeps enjoying that even its cwnd decreases) Here is a tentative fix (I also added a comment, trying to keep the change clear): Acked-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net> | 12 July 2006, 20:58:50 UTC |
| 781b456 | Stephen Hemminger | 11 July 2006, 03:25:29 UTC | [MAINTAINERS]: Add proper entry for TC classifier Acked-by: Jamal Hadi Salim <hadi@cyberus.ca> Signed-off-by: David S. Miller <davem@davemloft.net> | 12 July 2006, 20:58:48 UTC |
| 8bf2b7b | Ralf Baechle | 11 July 2006, 03:21:05 UTC | [NETROM]: Drop lock before calling nr_destroy_socket nr_destroy_socket takes the socket lock itself so it should better be called with the socket unlocked. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: David S. Miller <davem@davemloft.net> | 12 July 2006, 20:58:45 UTC |
| 5cc29e3 | Ralf Baechle | 10 July 2006, 23:23:21 UTC | [NETROM]: Fix locking order when establishing a NETROM circuit. When establishing a new circuit in nr_rx_frame the locks are taken in a different order than in the rest of the stack. This should be harmless but triggers lockdep. Either way, reordering the code a little solves the issue. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: David S. Miller <davem@davemloft.net> | 12 July 2006, 20:58:43 UTC |
| 95ff9f4 | Ralf Baechle | 10 July 2006, 23:21:29 UTC | [AX.25]: Fix locking of ax25 protocol function list. Delivery of AX.25 frame to the layer 3 protocols happens in softirq context so locking needs to be bh-proof. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: David S. Miller <davem@davemloft.net> | 12 July 2006, 20:58:40 UTC |
| e55ffac | Brian Haley | 10 July 2006, 22:25:51 UTC | [IPV6]: order addresses by scope If IPv6 addresses are ordered by scope, then ipv6_dev_get_saddr() can break-out of the device addr_list for() loop when the candidate source address scope is less than the destination address scope. Signed-off-by: Brian Haley <brian.haley@hp.com> Acked-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net> | 12 July 2006, 20:58:37 UTC |
| 155dbfd | Linus Torvalds | 12 July 2006, 20:03:35 UTC | Merge commit master.kernel.org:/pub/scm/linux/kernel/git/perex/alsa of HEAD * HEAD: [ALSA] Fix undefined (missing) references in ISA MIRO sound driver [ALSA] make sound/isa/gus/gusextreme.c:devices static [ALSA] hda-codec - Fix missing array terminators in AD1988 codec support [ALSA] Fix a deadlock in snd-rtctimer [ALSA] Fix section mismatch errors in ALSA PCI drivers [ALSA] remove unused snd_minor.name field [ALSA] Fix no mpu401 interface can cause hard freeze [ALSA] wavefront: fix __init/__devinit confusion [ALSA] Fix workaround for AD1988A rev2 codec [ALSA] trivial: Code clean up of i2c/cs8427.c [ALSA] sound/i2c/cs8427.c: don't export a static function [ALSA] intel8x0 - Add ac97 quirk for Tyan Thunder K8WE board [ALSA] Reduce the string length of Terratec Aureon 7.1 Universe [ALSA] sound/pci/Kconfig - fix broken indenting for SND_FM801_TEA575X [ALSA] fix the SND_FM801_TEA575X dependencies [ALSA] Memory leak in sound/pcmcia/pdaudiocf/pdaudiocf.c | 12 July 2006, 20:03:35 UTC |
| 15e0c69 | Alan Cox | 12 July 2006, 14:05:41 UTC | [PATCH] ide: fix Jmicron support Prior to 2.6.18rc1 you could install with devices on a JMicron chipset using the "all-generic-ide" option. As of this kernel the AHCI driver grabs the controller and rams it into AHCI mode losing the PATA ports and making CD drives and the like vanish. The all-generic-ide option fails because the AHCI driver grabbed the PCI device and reconfigured it. To fix this three things are needed. #1 We must put the chip into dual function mode #2 The AHCI driver must grab only function 0 (already in your rc1 tree) #3 Something must grab the PATA ports The attached patch is the minimal risk edition of this. It puts the chip into dual function mode so that AHCI will grab the SATA ports without losing the PATA ports. To keep the risk as low as possible the third patch adds the PCI identifiers for the PATA port and the FN check to the ide-generic driver. There is a more featured jmicron driver on its way but that adds risk and the ide-generic support is sufficient to install and run a system. The actual chip setup done by the quirk is the precise setup recommended by the vendor. (The JMB368 appears only in the ide-generic entry as it has no AHCI so does not need the quirk) Signed-off-by: Alan Cox <alan@redhat.com> Acked-by: Jeff Garzik <jgarzik@pobox.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org> | 12 July 2006, 19:59:35 UTC |
| f6dc8c5 | Chase Venters | 08 July 2006, 16:10:29 UTC | [PATCH] Make cpu_relax() imply barrier() on all arches During the recent discussion of taking 'volatile' off of the spinlock, I noticed that while most arches #define cpu_relax() such that it implies barrier(), some arches define cpu_relax() to be empty. This patch changes the definition of cpu_relax() for frv, h8300, m68knommu, sh, sh64, v850 and xtensa from an empty while(0) to the compiler barrier(). Signed-off-by: Chase Venters <chase.venters@clientec.com> Acked-by: Arjan van de Ven <arjan@Linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org> | 12 July 2006, 19:56:45 UTC |
| 0f74964 | Ingo Molnar | 12 July 2006, 16:03:10 UTC | [PATCH] lockdep: HPET/RTC fix Joseph Fannin reported that hpet_rtc_interrupt() enables hardirqs in irq context: [ 25.628000] [<c014af4e>] trace_hardirqs_on+0xce/0x200 [ 25.628000] [<c036cf21>] _spin_unlock_irq+0x31/0x70 [ 25.628000] [<c0296584>] rtc_get_rtc_time+0x44/0x1a0 [ 25.628000] [<c01198bb>] hpet_rtc_interrupt+0x21b/0x280 [ 25.628000] [<c0161141>] handle_IRQ_event+0x31/0x70 [ 25.628000] [<c0162d37>] handle_edge_irq+0xe7/0x210 [ 25.628000] [<c0106192>] do_IRQ+0x92/0x120 [ 25.628000] [<c0104121>] common_interrupt+0x25/0x2c the call of rtc_get_rtc_time() is highly suspect. At a minimum we need the patch below to save/restore hardirq state. Signed-off-by: Ingo Molnar <mingo@elte.hu> Cc: Joseph Fannin <jfannin@gmail.com> Cc: John Stultz <johnstul@us.ibm.com> Cc: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org> | 12 July 2006, 19:52:55 UTC |
| a29b0b7 | Andrew Morton | 12 July 2006, 16:03:08 UTC | [PATCH] alloc_fdtable() expansion fix We're supposed to go the next power of two if nfds==nr. Of `nr', not of `nfsd'. Spotted by Rene Scharfe <rene.scharfe@lsrfire.ath.cx> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org> | 12 July 2006, 19:52:55 UTC |
