Revision e2921f9f95f1c1355a39e54dc038ad95b6e032be authored by Linus Torvalds on 26 July 2019, 21:12:54 UTC, committed by Linus Torvalds on 26 July 2019, 21:12:54 UTC
Pull drm fixes from Daniel Vetter: "Dave seems to collect an entire streak of things happening, so again me typing pull summary. Nothing nefarious here, most of the fixes are for new stuff or things users won't see. The amd-display patches are a bit different, and very much look like they should have at least some cc: stable tags. Might be amd is a bit too comfortable with their internal tree and not enough looking at upstream. Dave&me are looking into this, in case something needs rectified with process here. Also no intel fixes pull, but intel CI is general become rather good, still I guess expect a notch more for -rc3. Summary: amdgpu: - fixes for (new in 5.3) hw support (vega20, navi) - disable RAS - lots of display fixes all over (audio, DSC, dongle, clock mgr) ttm: - fix dma_free_attrs calls to appease dma debugging msm: - fixes for dma-api, locking debug and compiler splats core: - fix cmdline mode to not apply rotation if not specified (new in 5.3) - compiler warn fix" * tag 'drm-fixes-2019-07-26' of git://anongit.freedesktop.org/drm/drm: (46 commits) drm/amd/display: Set enabled to false at start of audio disable drm/amdgpu/smu: move fan rpm query into the asic specific code drm/amd/powerplay: custom peak clock freq for navi10 drm: silence variable 'conn' set but not used drm/msm: stop abusing dma_map/unmap for cache drm/msm/dpu: Correct dpu encoder spinlock initialization drm/msm: correct NULL pointer dereference in context_init drm/amd/display: handle active dongle port type is DP++ or DP case drm/amd/display: do not read link setting if edp not connected drm/amd/display: Increase size of audios array drm/amd/display: drop ASSERT() if eDP panel is not connected drm/amd/display: Only enable audio if speaker allocation exists drm/amd/display: Fix dc_create failure handling and 666 color depths drm/amd/display: allocate 4 ddc engines for RV2 drm/amd/display: put back front end initialization sequence drm/amd/display: Wait for flip to complete drm/amd/display: Change min_h_sync_width from 8 to 4 drm/amd/display: use encoder's engine id to find matched free audio device drm/amd/display: fix DMCU hang when going into Modern Standby drm/amd/display: Disable Audio on reinitialize hardware ...
lp873x-regulator.c
/*
* Regulator driver for LP873X PMIC
*
* Copyright (C) 2016 Texas Instruments Incorporated - http://www.ti.com/
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* This program is distributed "as is" WITHOUT ANY WARRANTY of any
* kind, whether expressed or implied; without even the implied warranty
* of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License version 2 for more details.
*/
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/regmap.h>
#include <linux/mfd/lp873x.h>
#define LP873X_REGULATOR(_name, _id, _of, _ops, _n, _vr, _vm, _er, _em, \
_delay, _lr, _cr) \
[_id] = { \
.desc = { \
.name = _name, \
.supply_name = _of "-in", \
.id = _id, \
.of_match = of_match_ptr(_of), \
.regulators_node = of_match_ptr("regulators"),\
.ops = &_ops, \
.n_voltages = _n, \
.type = REGULATOR_VOLTAGE, \
.owner = THIS_MODULE, \
.vsel_reg = _vr, \
.vsel_mask = _vm, \
.enable_reg = _er, \
.enable_mask = _em, \
.ramp_delay = _delay, \
.linear_ranges = _lr, \
.n_linear_ranges = ARRAY_SIZE(_lr), \
.curr_table = lp873x_buck_uA, \
.n_current_limits = ARRAY_SIZE(lp873x_buck_uA), \
.csel_reg = (_cr), \
.csel_mask = LP873X_BUCK0_CTRL_2_BUCK0_ILIM,\
}, \
.ctrl2_reg = _cr, \
}
struct lp873x_regulator {
struct regulator_desc desc;
unsigned int ctrl2_reg;
};
static const struct lp873x_regulator regulators[];
static const struct regulator_linear_range buck0_buck1_ranges[] = {
REGULATOR_LINEAR_RANGE(0, 0x0, 0x13, 0),
REGULATOR_LINEAR_RANGE(700000, 0x14, 0x17, 10000),
REGULATOR_LINEAR_RANGE(735000, 0x18, 0x9d, 5000),
REGULATOR_LINEAR_RANGE(1420000, 0x9e, 0xff, 20000),
};
static const struct regulator_linear_range ldo0_ldo1_ranges[] = {
REGULATOR_LINEAR_RANGE(800000, 0x0, 0x19, 100000),
};
static const unsigned int lp873x_buck_ramp_delay[] = {
30000, 15000, 10000, 7500, 3800, 1900, 940, 470
};
/* LP873X BUCK current limit */
static const unsigned int lp873x_buck_uA[] = {
1500000, 2000000, 2500000, 3000000, 3500000, 4000000,
};
static int lp873x_buck_set_ramp_delay(struct regulator_dev *rdev,
int ramp_delay)
{
int id = rdev_get_id(rdev);
struct lp873x *lp873 = rdev_get_drvdata(rdev);
unsigned int reg;
int ret;
if (ramp_delay <= 470)
reg = 7;
else if (ramp_delay <= 940)
reg = 6;
else if (ramp_delay <= 1900)
reg = 5;
else if (ramp_delay <= 3800)
reg = 4;
else if (ramp_delay <= 7500)
reg = 3;
else if (ramp_delay <= 10000)
reg = 2;
else if (ramp_delay <= 15000)
reg = 1;
else
reg = 0;
ret = regmap_update_bits(lp873->regmap, regulators[id].ctrl2_reg,
LP873X_BUCK0_CTRL_2_BUCK0_SLEW_RATE,
reg << __ffs(LP873X_BUCK0_CTRL_2_BUCK0_SLEW_RATE));
if (ret) {
dev_err(lp873->dev, "SLEW RATE write failed: %d\n", ret);
return ret;
}
rdev->constraints->ramp_delay = lp873x_buck_ramp_delay[reg];
return 0;
}
/* Operations permitted on BUCK0, BUCK1 */
static const struct regulator_ops lp873x_buck01_ops = {
.is_enabled = regulator_is_enabled_regmap,
.enable = regulator_enable_regmap,
.disable = regulator_disable_regmap,
.get_voltage_sel = regulator_get_voltage_sel_regmap,
.set_voltage_sel = regulator_set_voltage_sel_regmap,
.list_voltage = regulator_list_voltage_linear_range,
.map_voltage = regulator_map_voltage_linear_range,
.set_voltage_time_sel = regulator_set_voltage_time_sel,
.set_ramp_delay = lp873x_buck_set_ramp_delay,
.set_current_limit = regulator_set_current_limit_regmap,
.get_current_limit = regulator_get_current_limit_regmap,
};
/* Operations permitted on LDO0 and LDO1 */
static const struct regulator_ops lp873x_ldo01_ops = {
.is_enabled = regulator_is_enabled_regmap,
.enable = regulator_enable_regmap,
.disable = regulator_disable_regmap,
.get_voltage_sel = regulator_get_voltage_sel_regmap,
.set_voltage_sel = regulator_set_voltage_sel_regmap,
.list_voltage = regulator_list_voltage_linear_range,
.map_voltage = regulator_map_voltage_linear_range,
};
static const struct lp873x_regulator regulators[] = {
LP873X_REGULATOR("BUCK0", LP873X_BUCK_0, "buck0", lp873x_buck01_ops,
256, LP873X_REG_BUCK0_VOUT,
LP873X_BUCK0_VOUT_BUCK0_VSET, LP873X_REG_BUCK0_CTRL_1,
LP873X_BUCK0_CTRL_1_BUCK0_EN, 10000,
buck0_buck1_ranges, LP873X_REG_BUCK0_CTRL_2),
LP873X_REGULATOR("BUCK1", LP873X_BUCK_1, "buck1", lp873x_buck01_ops,
256, LP873X_REG_BUCK1_VOUT,
LP873X_BUCK1_VOUT_BUCK1_VSET, LP873X_REG_BUCK1_CTRL_1,
LP873X_BUCK1_CTRL_1_BUCK1_EN, 10000,
buck0_buck1_ranges, LP873X_REG_BUCK1_CTRL_2),
LP873X_REGULATOR("LDO0", LP873X_LDO_0, "ldo0", lp873x_ldo01_ops, 26,
LP873X_REG_LDO0_VOUT, LP873X_LDO0_VOUT_LDO0_VSET,
LP873X_REG_LDO0_CTRL,
LP873X_LDO0_CTRL_LDO0_EN, 0, ldo0_ldo1_ranges, 0xFF),
LP873X_REGULATOR("LDO1", LP873X_LDO_1, "ldo1", lp873x_ldo01_ops, 26,
LP873X_REG_LDO1_VOUT, LP873X_LDO1_VOUT_LDO1_VSET,
LP873X_REG_LDO1_CTRL,
LP873X_LDO1_CTRL_LDO1_EN, 0, ldo0_ldo1_ranges, 0xFF),
};
static int lp873x_regulator_probe(struct platform_device *pdev)
{
struct lp873x *lp873 = dev_get_drvdata(pdev->dev.parent);
struct regulator_config config = { };
struct regulator_dev *rdev;
int i;
platform_set_drvdata(pdev, lp873);
config.dev = &pdev->dev;
config.dev->of_node = lp873->dev->of_node;
config.driver_data = lp873;
config.regmap = lp873->regmap;
for (i = 0; i < ARRAY_SIZE(regulators); i++) {
rdev = devm_regulator_register(&pdev->dev, ®ulators[i].desc,
&config);
if (IS_ERR(rdev)) {
dev_err(lp873->dev, "failed to register %s regulator\n",
pdev->name);
return PTR_ERR(rdev);
}
}
return 0;
}
static const struct platform_device_id lp873x_regulator_id_table[] = {
{ "lp873x-regulator", },
{ /* sentinel */ }
};
MODULE_DEVICE_TABLE(platform, lp873x_regulator_id_table);
static struct platform_driver lp873x_regulator_driver = {
.driver = {
.name = "lp873x-pmic",
},
.probe = lp873x_regulator_probe,
.id_table = lp873x_regulator_id_table,
};
module_platform_driver(lp873x_regulator_driver);
MODULE_AUTHOR("J Keerthy <j-keerthy@ti.com>");
MODULE_DESCRIPTION("LP873X voltage regulator driver");
MODULE_ALIAS("platform:lp873x-pmic");
MODULE_LICENSE("GPL v2");
![swh spinner](/static/img/swh-spinner.gif)
Computing file changes ...