e29c6a1 | Linus Torvalds | 16 February 2020, 20:35:52 UTC | Merge tag 'block-5.6-2020-02-16' of git://git.kernel.dk/linux-block Pull block fixes from Jens Axboe: "Not a lot here, which is great, basically just three small bcache fixes from Coly, and four NVMe fixes via Keith" * tag 'block-5.6-2020-02-16' of git://git.kernel.dk/linux-block: nvme: fix the parameter order for nvme_get_log in nvme_get_fw_slot_info nvme/pci: move cqe check after device shutdown nvme: prevent warning triggered by nvme_stop_keep_alive nvme/tcp: fix bug on double requeue when send fails bcache: remove macro nr_to_fifo_front() bcache: Revert "bcache: shrink btree node cache after bch_btree_check()" bcache: ignore pending signals when creating gc and allocator thread | 16 February 2020, 20:35:52 UTC |
713db35 | Linus Torvalds | 16 February 2020, 19:43:45 UTC | Merge tag 'for-5.6-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux Pull btrfs fixes from David Sterba: "Two races fixed, memory leak fix, sysfs directory fixup and two new log messages: - two fixed race conditions: extent map merging and truncate vs fiemap - create the right sysfs directory with device information and move the individual device dirs under it - print messages when the tree-log is replayed at mount time or cannot be replayed on remount" * tag 'for-5.6-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: btrfs: sysfs, move device id directories to UUID/devinfo btrfs: sysfs, add UUID/devinfo kobject Btrfs: fix race between shrinking truncate and fiemap btrfs: log message when rw remount is attempted with unclean tree-log btrfs: print message when tree-log replay starts Btrfs: fix race between using extent maps and merging them btrfs: ref-verify: fix memory leaks | 16 February 2020, 19:43:45 UTC |
288b27a | Linus Torvalds | 16 February 2020, 19:41:29 UTC | Merge tag '5.6-rc1-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6 Pull cifs fixes from Steve French: "Four small CIFS/SMB3 fixes. One (the EA overflow fix) for stable" * tag '5.6-rc1-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6: cifs: make sure we do not overflow the max EA buffer size cifs: enable change notification for SMB2.1 dialect cifs: Fix mode output in debugging statements cifs: fix mount option display for sec=krb5i | 16 February 2020, 19:41:29 UTC |
8a8b809 | Linus Torvalds | 16 February 2020, 19:12:06 UTC | Merge tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4 Pull ext4 fixes from Ted Ts'o: "Miscellaneous ext4 bug fixes (all stable fodder)" * tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: ext4: improve explanation of a mount failure caused by a misconfigured kernel jbd2: do not clear the BH_Mapped flag when forgetting a metadata buffer jbd2: move the clearing of b_modified flag to the journal_unmap_buffer() ext4: add cond_resched() to ext4_protect_reserved_inode ext4: fix checksum errors with indexed dirs ext4: fix support for inode sizes > 1024 bytes ext4: simplify checking quota limits in ext4_statfs() ext4: don't assume that mmp_nodename/bdevname have NUL | 16 February 2020, 19:12:06 UTC |
db70e26 | Linus Torvalds | 16 February 2020, 00:49:25 UTC | Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input updates from Dmitry Torokhov: - a few drivers have been updated to use flexible-array syntax instead of GCC extension - ili210x touchscreen driver now supports the 2120 protocol flavor - a couple more of Synaptics devices have been switched over to RMI4 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: cyapa - replace zero-length array with flexible-array member Input: tca6416-keypad - replace zero-length array with flexible-array member Input: gpio_keys_polled - replace zero-length array with flexible-array member Input: synaptics - remove the LEN0049 dmi id from topbuttonpad list Input: synaptics - enable SMBus on ThinkPad L470 Input: synaptics - switch T470s to RMI4 by default Input: gpio_keys - replace zero-length array with flexible-array member Input: goldfish_events - replace zero-length array with flexible-array member Input: psmouse - switch to using i2c_new_scanned_device() Input: ili210x - add ili2120 support Input: ili210x - fix return value of is_visible function | 16 February 2020, 00:49:25 UTC |
54654e1 | Linus Torvalds | 16 February 2020, 00:38:49 UTC | Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma Pull rdma fixes from Jason Gunthorpe: "Not too much going on here, though there are about four fixes related to stuff merged during the last merge window. We also see the return of a syzkaller instance with access to RDMA devices, and a few bugs detected by that squished. - Fix three crashers and a memory memory leak for HFI1 - Several bugs found by syzkaller - A bug fix for the recent QP counters feature on older mlx5 HW - Locking inversion in cxgb4 - Unnecessary WARN_ON in siw - A umad crasher regression during unload, from a bug fix for something else - Bugs introduced in the merge window: - Missed list_del in uverbs file rework, core and mlx5 devx - Unexpected integer math truncation in the mlx5 VAR patches - Compilation bug fix for the VAR patches on 32 bit" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: IB/mlx5: Use div64_u64 for num_var_hw_entries calculation RDMA/core: Fix protection fault in get_pkey_idx_qp_list RDMA/rxe: Fix soft lockup problem due to using tasklets in softirq RDMA/mlx5: Prevent overflow in mmap offset calculations IB/umad: Fix kernel crash while unloading ib_umad RDMA/mlx5: Fix async events cleanup flows RDMA/core: Add missing list deletion on freeing event queue RDMA/siw: Remove unwanted WARN_ON in siw_cm_llp_data_ready() RDMA/iw_cxgb4: initiate CLOSE when entering TERM IB/mlx5: Return failure when rts2rts_qp_counters_set_id is not supported RDMA/core: Fix invalid memory access in spec_filter_size IB/rdmavt: Reset all QPs when the device is shut down IB/hfi1: Close window for pq and request coliding IB/hfi1: Acquire lock to release TID entries when user file is closed RDMA/hfi1: Fix memory leak in _dev_comp_vect_mappings_create | 16 February 2020, 00:38:49 UTC |
b719ae0 | Linus Torvalds | 15 February 2020, 21:16:47 UTC | Merge tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC fixes from Olof Johansson: "A handful of fixes that have come in since the merge window: - Fix of PCI interrupt map on arm64 fast model (SW emulator) - Fixlet for sound on ST platforms and a small cleanup of deprecated DT properties - A stack buffer overflow fix for moxtet - Fuse driver build fix for Tegra194 - A few config updates to turn on new drivers merged this cycle" * tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: bus: moxtet: fix potential stack buffer overflow soc/tegra: fuse: Fix build with Tegra194 configuration ARM: dts: sti: fixup sound frame-inversion for stihxxx-b2120.dtsi ARM: dts: sti: Remove deprecated snps PHY properties for stih410-b2260 arm64: defconfig: Enable DRM_SUN6I_DSI arm64: defconfig: Enable CONFIG_SUN8I_THERMAL ARM: sunxi: Enable CONFIG_SUN8I_THERMAL arm64: defconfig: Set bcm2835-dma as built-in ARM: configs: Cleanup old Kconfig options ARM: npcm: Bring back GPIOLIB support arm64: dts: fast models: Fix FVP PCI interrupt-map property | 15 February 2020, 21:16:47 UTC |
3e71e12 | Linus Torvalds | 15 February 2020, 21:10:38 UTC | Merge tag 's390-5.6-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 updates from Vasily Gorbik: - Enable paes-s390 cipher selftests in testmgr (acked-by Herbert Xu). - Fix protected key length update in PKEY_SEC2PROTK ioctl and increase card/queue requests counter to 64-bit in crypto code. - Fix clang warning in get_tod_clock. - Fix ultravisor info length extensions handling. - Fix style of SPDX License Identifier in vfio-ccw. - Avoid unnecessary GFP_ATOMIC and simplify ACK tracking in qdio. * tag 's390-5.6-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: crypto/testmgr: enable selftests for paes-s390 ciphers s390/time: Fix clk type in get_tod_clock s390/uv: Fix handling of length extensions s390/qdio: don't allocate *aob array with GFP_ATOMIC s390/qdio: simplify ACK tracking s390/zcrypt: fix card and queue total counter wrap s390/pkey: fix missing length of protected key on return vfio-ccw: Use the correct style for SPDX License Identifier | 15 February 2020, 21:10:38 UTC |
bd51613 | Linus Torvalds | 15 February 2020, 21:03:50 UTC | Merge tag 'hwmon-for-v5.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull hwmon fixes from Guenter Roeck: "Fix compatible string typos in the xdpe12284 driver, and a wrong bit value in the ltc2978 driver" * tag 'hwmon-for-v5.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: (pmbus/xdpe12284) fix typo in compatible strings hwmon: (pmbus/ltc2978) Fix PMBus polling of MFR_COMMON definitions. | 15 February 2020, 21:03:50 UTC |
ef78e5b | Linus Torvalds | 15 February 2020, 20:51:22 UTC | Merge branch 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler fixes from Ingo Molnar: "Misc fixes all over the place: - Fix NUMA over-balancing between lightly loaded nodes. This is fallout of the big load-balancer rewrite. - Fix the NOHZ remote loadavg update logic, which fixes anomalies like reported 150 loadavg on mostly idle CPUs. - Fix XFS performance/scalability - Fix throttled groups unbound task-execution bug - Fix PSI procfs boundary condition - Fix the cpu.uclamp.{min,max} cgroup configuration write checks - Fix DocBook annotations - Fix RCU annotations - Fix overly CPU-intensive housekeeper CPU logic loop on large CPU counts" * 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/fair: Fix kernel-doc warning in attach_entity_load_avg() sched/core: Annotate curr pointer in rq with __rcu sched/psi: Fix OOB write when writing 0 bytes to PSI files sched/fair: Allow a per-CPU kthread waking a task to stack on the same CPU, to fix XFS performance regression sched/fair: Prevent unlimited runtime on throttled group sched/nohz: Optimize get_nohz_timer_target() sched/uclamp: Reject negative values in cpu_uclamp_write() sched/fair: Allow a small load imbalance between low utilisation SD_NUMA domains timers/nohz: Update NOHZ load in remote tick sched/core: Don't skip remote tick for idle CPUs | 15 February 2020, 20:51:22 UTC |
da99f93 | Linus Torvalds | 15 February 2020, 20:30:42 UTC | Merge branch 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf fixes from Ingo Molnar: "Fixes and HW enablement patches: - Tooling fixes, most of which are tooling header synchronization with v5.6 changes - Fix kprobes fallout on ARM - Add Intel Elkhart Lake support and extend Tremont support, these are relatively simple and should only affect those models - Fix the AMD family 17h generic event table" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (30 commits) perf llvm: Fix script used to obtain kernel make directives to work with new kbuild tools headers kvm: Sync linux/kvm.h with the kernel sources tools headers kvm: Sync kvm headers with the kernel sources tools arch x86: Sync asm/cpufeatures.h with the kernel sources tools headers x86: Sync disabled-features.h tools include UAPI: Sync sound/asound.h copy tools headers UAPI: Sync asm-generic/mman-common.h with the kernel perf tools: Add arm64 version of get_cpuid() tools headers UAPI: Sync drm/i915_drm.h with the kernel sources tools headers uapi: Sync linux/fscrypt.h with the kernel sources tools headers UAPI: Sync sched.h with the kernel perf trace: Resolve prctl's 'option' arg strings to numbers perf beauty prctl: Export the 'options' strarray tools headers UAPI: Sync prctl.h with the kernel sources tools headers UAPI: Sync copy of arm64's asm/unistd.h with the kernel sources perf maps: Move kmap::kmaps setup to maps__insert() perf maps: Fix map__clone() for struct kmap perf maps: Mark ksymbol DSOs with kernel type perf maps: Mark module DSOs with kernel type tools include UAPI: Sync x86's syscalls_64.tbl, generic unistd.h and fcntl.h to pick up openat2 and pidfd_getfd ... | 15 February 2020, 20:30:42 UTC |
3bf3c97 | Marek Behún | 15 February 2020, 14:21:30 UTC | bus: moxtet: fix potential stack buffer overflow The input_read function declares the size of the hex array relative to sizeof(buf), but buf is a pointer argument of the function. The hex array is meant to contain hexadecimal representation of the bin array. Link: https://lore.kernel.org/r/20200215142130.22743-1-marek.behun@nic.cz Fixes: 5bc7f990cd98 ("bus: Add support for Moxtet bus") Signed-off-by: Marek Behún <marek.behun@nic.cz> Reported-by: sohu0106 <sohu0106@126.com> Signed-off-by: Olof Johansson <olof@lixom.net> | 15 February 2020, 18:33:19 UTC |
d65d87a | Theodore Ts'o | 14 February 2020, 23:11:19 UTC | ext4: improve explanation of a mount failure caused by a misconfigured kernel If CONFIG_QFMT_V2 is not enabled, but CONFIG_QUOTA is enabled, when a user tries to mount a file system with the quota or project quota enabled, the kernel will emit a very confusing messsage: EXT4-fs warning (device vdc): ext4_enable_quotas:5914: Failed to enable quota tracking (type=0, err=-3). Please run e2fsck to fix. EXT4-fs (vdc): mount failed We will now report an explanatory message indicating which kernel configuration options have to be enabled, to avoid customer/sysadmin confusion. Link: https://lore.kernel.org/r/20200215012738.565735-1-tytso@mit.edu Google-Bug-Id: 149093531 Fixes: 7c319d328505b778 ("ext4: make quota as first class supported feature") Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@kernel.org | 15 February 2020, 14:53:45 UTC |
dfb9b69 | Ingo Molnar | 15 February 2020, 08:35:11 UTC | Merge tag 'perf-urgent-for-mingo-5.6-20200214' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent Pull perf/urgent fixes from Arnaldo Carvalho de Melo: BPF: Arnaldo Carvalho de Melo: - Fix script used to obtain kernel make directives to work with new kbuild used for building BPF programs. maps: Jiri Olsa: - Fixup kmap->kmaps backpointer in kernel maps. arm64: John Garry: - Add arm64 version of get_cpuid() to get proper, arm64 specific output from 'perf list' and other tools. perf top: Kim Phillips: - Update kernel idle symbols so that output in AMD systems is in line with other systems. perf stat: Kim Phillips: - Don't report a null stalled cycles per insn metric. tools headers: Arnaldo Carvalho de Melo: - Sync tools/ headers with the kernel sources to get things like syscall numbers and new arguments so that 'perf trace' can decode and use them in tracepoint filters, e.g. prctl's new PR_{G,S}ET_IO_FLUSHER options. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@kernel.org> | 15 February 2020, 08:35:11 UTC |
3dbae15 | Gustavo A. R. Silva | 15 February 2020, 01:03:12 UTC | Input: cyapa - replace zero-length array with flexible-array member The current codebase makes use of the zero-length array language extension to the C90 standard, but the preferred mechanism to declare variable-length types such as these ones is a flexible array member[1][2], introduced in C99: struct foo { int stuff; struct boo array[]; }; By making use of the mechanism above, we will get a compiler warning in case the flexible array does not occur last in the structure, which will help us prevent some kind of undefined behavior bugs from being inadvertently introduced[3] to the codebase from now on. Also, notice that, dynamic memory allocations won't be affected by this change: "Flexible array members have incomplete type, and so the sizeof operator may not be applied. As a quirk of the original implementation of zero-length arrays, sizeof evaluates to zero."[1] This issue was found with the help of Coccinelle. [1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html [2] https://github.com/KSPP/linux/issues/21 [3] commit 76497732932f ("cxgb3/l2t: Fix undefined behaviour") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Link: https://lore.kernel.org/r/20200214172132.GA28389@embeddedor Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> | 15 February 2020, 01:19:22 UTC |
94bef5d | Gustavo A. R. Silva | 15 February 2020, 01:02:11 UTC | Input: tca6416-keypad - replace zero-length array with flexible-array member The current codebase makes use of the zero-length array language extension to the C90 standard, but the preferred mechanism to declare variable-length types such as these ones is a flexible array member[1][2], introduced in C99: struct foo { int stuff; struct boo array[]; }; By making use of the mechanism above, we will get a compiler warning in case the flexible array does not occur last in the structure, which will help us prevent some kind of undefined behavior bugs from being inadvertently introduced[3] to the codebase from now on. Also, notice that, dynamic memory allocations won't be affected by this change: "Flexible array members have incomplete type, and so the sizeof operator may not be applied. As a quirk of the original implementation of zero-length arrays, sizeof evaluates to zero."[1] This issue was found with the help of Coccinelle. [1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html [2] https://github.com/KSPP/linux/issues/21 [3] commit 76497732932f ("cxgb3/l2t: Fix undefined behaviour") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Link: https://lore.kernel.org/r/20200214172022.GA27490@embeddedor Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> | 15 February 2020, 01:19:21 UTC |
3d87c75 | Gustavo A. R. Silva | 15 February 2020, 01:01:46 UTC | Input: gpio_keys_polled - replace zero-length array with flexible-array member The current codebase makes use of the zero-length array language extension to the C90 standard, but the preferred mechanism to declare variable-length types such as these ones is a flexible array member[1][2], introduced in C99: struct foo { int stuff; struct boo array[]; }; By making use of the mechanism above, we will get a compiler warning in case the flexible array does not occur last in the structure, which will help us prevent some kind of undefined behavior bugs from being inadvertently introduced[3] to the codebase from now on. Also, notice that, dynamic memory allocations won't be affected by this change: "Flexible array members have incomplete type, and so the sizeof operator may not be applied. As a quirk of the original implementation of zero-length arrays, sizeof evaluates to zero."[1] This issue was found with the help of Coccinelle. [1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html [2] https://github.com/KSPP/linux/issues/21 [3] commit 76497732932f ("cxgb3/l2t: Fix undefined behaviour") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Link: https://lore.kernel.org/r/20200214171907.GA26588@embeddedor Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> | 15 February 2020, 01:19:19 UTC |
829e694 | Linus Torvalds | 14 February 2020, 22:46:11 UTC | Merge tag 'nfs-for-5.6-2' of git://git.linux-nfs.org/projects/anna/linux-nfs Pull NFS client bugfixes from Anna Schumaker: "The only stable fix this time is the DMA scatter-gather list bug fixed by Chuck. The rest fix up races and refcounting issues that have been found during testing. Stable fix: - fix DMA scatter-gather list mapping imbalance The rest: - fix directory verifier races - fix races between open and dentry revalidation - fix revalidation of dentries with delegations - fix "cachethis" setting for writes - fix delegation and delegation cred pinning" * tag 'nfs-for-5.6-2' of git://git.linux-nfs.org/projects/anna/linux-nfs: NFSv4: Ensure the delegation cred is pinned when we call delegreturn NFSv4: Ensure the delegation is pinned in nfs_do_return_delegation() NFSv4.1 make cachethis=no for writes xprtrdma: Fix DMA scatter-gather list mapping imbalance NFSv4: Fix revalidation of dentries with delegations NFSv4: Fix races between open and dentry revalidation NFS: Fix up directory verifier races | 14 February 2020, 22:46:11 UTC |
cf556ed | Linus Torvalds | 14 February 2020, 22:42:31 UTC | Merge tag 'ceph-for-5.6-rc2' of https://github.com/ceph/ceph-client Pull ceph fixes from Ilya Dryomov: - make O_DIRECT | O_APPEND combination work better - redo the server path canonicalization patch that went into -rc1 - fix the 'noacl' mount option that got broken by the conversion to the new mount API in 5.5 * tag 'ceph-for-5.6-rc2' of https://github.com/ceph/ceph-client: ceph: noacl mount option is effectively ignored ceph: canonicalize server path in place ceph: do not execute direct write in parallel if O_APPEND is specified | 14 February 2020, 22:42:31 UTC |
ca60ad6 | Linus Torvalds | 14 February 2020, 21:47:02 UTC | Merge tag 'io_uring-5.6-2020-02-14' of git://git.kernel.dk/linux-block Pull io_uring fixes from Jens Axboe: "Here's a set of fixes for io_uring: - Various fixes with cleanups from Pavel, fixing corner cases where we're not correctly dealing with iovec cleanup. - Clarify that statx/openat/openat2 don't accept fixed files - Buffered raw device write EOPTNOTSUPP fix - Ensure async workers grab current->fs - A few task exit fixes with pending requests that grab the file table - send/recvmsg async load fix - io-wq offline node setup fix - CQ overflow flush in poll" * tag 'io_uring-5.6-2020-02-14' of git://git.kernel.dk/linux-block: (21 commits) io_uring: prune request from overflow list on flush io-wq: don't call kXalloc_node() with non-online node io_uring: retain sockaddr_storage across send/recvmsg async punt io_uring: cancel pending async work if task exits io-wq: add io_wq_cancel_pid() to cancel based on a specific pid io-wq: make io_wqe_cancel_work() take a match handler io_uring: fix openat/statx's filename leak io_uring: fix double prep iovec leak io_uring: fix async close() with f_op->flush() io_uring: allow AT_FDCWD for non-file openat/openat2/statx io_uring: grab ->fs as part of async preparation io-wq: add support for inheriting ->fs io_uring: retry raw bdev writes if we hit -EOPNOTSUPP io_uring: add cleanup for openat()/statx() io_uring: fix iovec leaks io_uring: remove unused struct io_async_open io_uring: flush overflowed CQ events in the io_uring_poll() io_uring: statx/openat/openat2 don't support fixed files io_uring: fix deferred req iovec leak io_uring: fix 1-bit bitfields to be unsigned ... | 14 February 2020, 21:47:02 UTC |
2019fc9 | Linus Torvalds | 14 February 2020, 20:40:38 UTC | Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from David Miller: 1) Fix interrupt name truncation in mv88e6xxx dsa driver, from Andrew Lunn. 2) Process generic XDP even if SKB is cloned, from Toke Høiland-Jørgensen. 3) Fix leak of kernel memory to userspace in smc, from Eric Dumazet. 4) Add some missing netlink attribute validation to matchall and flower, from Davide Caratti. 5) Send icmp responses properly when NAT has been applied to the frame before we get to the tunnel emitting the icmp, from Jason Donenfeld. 6) Make sure there is enough SKB headroom when adding dsa tags for qca and ar9331. From Per Forlin. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (62 commits) netdevice.h: fix all kernel-doc and Sphinx warnings net: dsa: tag_ar9331: Make sure there is headroom for tag net: dsa: tag_qca: Make sure there is headroom for tag net, ip6_tunnel: enhance tunnel locate with link check net/smc: no peer ID in CLC decline for SMCD net/smc: transfer fasync_list in case of fallback net: hns3: fix a copying IPv6 address error in hclge_fd_get_flow_tuples() net: hns3: fix VF bandwidth does not take effect in some case net: hns3: add management table after IMP reset mac80211: fix wrong 160/80+80 MHz setting cfg80211: add missing policy for NL80211_ATTR_STATUS_CODE xfrm: interface: use icmp_ndo_send helper wireguard: device: use icmp_ndo_send helper sunvnet: use icmp_ndo_send helper gtp: use icmp_ndo_send helper icmp: introduce helper for nat'd source address in network device context net/sched: flower: add missing validation of TCA_FLOWER_FLAGS net/sched: matchall: add missing validation of TCA_MATCHALL_FLAGS net/flow_dissector: remove unexist field description page_pool: refill page when alloc.count of pool is zero ... | 14 February 2020, 20:40:38 UTC |
4e03e4e | Linus Torvalds | 14 February 2020, 20:34:30 UTC | Merge tag 'pm-5.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management fixes from Rafael Wysocki: "Fix three issues related to the handling of wakeup events signaled through the ACPI SCI while suspended to idle (Rafael Wysocki) and unexport an internal cpufreq variable (Yangtao Li)" * tag 'pm-5.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI: PM: s2idle: Prevent spurious SCIs from waking up the system ACPICA: Introduce acpi_any_gpe_status_set() ACPI: PM: s2idle: Avoid possible race related to the EC GPE ACPI: EC: Fix flushing of pending work cpufreq: Make cpufreq_global_kobject static | 14 February 2020, 20:34:30 UTC |
81f3011 | Linus Torvalds | 14 February 2020, 20:27:54 UTC | Merge tag 'sound-5.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "The only common change is the regression fix of the previous PCM fix patch for managed buffers while the rest are usual suspects, USB-audio and HD-audio device-specific quirks. The change for UAC2 clock validation workaround became a bit big, but the changes are fairly straightforward" * tag 'sound-5.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: pcm: Fix double hw_free calls ALSA: usb-audio: Add clock validity quirk for Denon MC7000/MCX8000 ALSA: hda/realtek - Fix silent output on MSI-GL73 ALSA: hda/realtek - Add more codec supported Headset Button ALSA: usb-audio: Apply sample rate quirk for Audioengine D1 ALSA: usb-audio: Fix UAC2/3 effect unit parsing ALSA: usb-audio: Apply 48kHz fixed rate playback for Jabra Evolve 65 headset | 14 February 2020, 20:27:54 UTC |
3f0d329 | Linus Torvalds | 14 February 2020, 20:23:16 UTC | Merge tag 'drm-fixes-2020-02-14' of git://anongit.freedesktop.org/drm/drm Pull drm fixes from Dave Airlie: "The core has a build fix for edid code on certain compilers/arches/, one MST fix and one vgem fix. Regular amdgpu fixes, and a couple of small driver fixes. The i915 fixes are bit larger than normal for this stage, but they were having CI issues last week, and they hadn't sent any fixes last week due to this. core: - edid build fix mst: - fix NULL ptr deref vgem: - fix close after free msm: - better dma-api usage sun4i: - disable allow_fb_modifiers amdgpu: - Additional OD fixes for navi - Misc display fixes - VCN 2.5 DPG fix - Prevent build errors on PowerPC on some configs - GDS EDC fix i915: - dsi/acpi fixes - gvt locking and allocation fixes - gem/gt fixes - bios timing parameters fix" * tag 'drm-fixes-2020-02-14' of git://anongit.freedesktop.org/drm/drm: (50 commits) drm/i915: Mark the removal of the i915_request from the sched.link drm/i915/execlists: Reclaim the hanging virtual request drm/i915/execlists: Take a reference while capturing the guilty request drm/i915/execlists: Offline error capture drm/i915/gt: Allow temporary suspension of inflight requests drm/i915: Keep track of request among the scheduling lists drm/i915/gem: Tighten checks and acquiring the mmap object drm/i915: Fix preallocated barrier list append drm/i915/gt: Acquire ce->active before ce->pin_count/ce->pin_mutex drm/i915: Tighten atomicity of i915_active_acquire vs i915_active_release drm/i915: Stub out i915_gpu_coredump_put drm/amdgpu:/navi10: use the ODCAP enum to index the caps array drm/amdgpu: update smu_v11_0_pptable.h drm/amdgpu: correct comment to clear up the confusion drm/amd/display: DCN2.x Do not program DPPCLK if same value drm/amd/display: Don't map ATOM_ENABLE to ATOM_INIT drm/amdgpu/vcn2.5: fix warning drm/amdgpu: limit GDS clearing workaround in cold boot sequence drm/amdgpu: fix amdgpu pmu to use hwc->config instead of hwc->conf amdgpu: Prevent build errors regarding soft/hard-float FP ABI tags ... | 14 February 2020, 20:23:16 UTC |
685eff5 | Jason Gunthorpe | 06 February 2020, 14:27:54 UTC | IB/mlx5: Use div64_u64 for num_var_hw_entries calculation On i386: ERROR: "__udivdi3" [drivers/infiniband/hw/mlx5/mlx5_ib.ko] undefined! ERROR: "__divdi3" [drivers/infiniband/hw/mlx5/mlx5_ib.ko] undefined! Fixes: f164be8c0366 ("IB/mlx5: Extend caps stage to handle VAR capabilities") Reported-by: Randy Dunlap <rdunlap@infradead.org> Acked-by: Randy Dunlap <rdunlap@infradead.org> # build-tested Reported-by: Alexander Lobakin <alobakin@dlink.ru> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> | 14 February 2020, 19:21:52 UTC |
f25372f | Yi Zhang | 14 February 2020, 10:48:02 UTC | nvme: fix the parameter order for nvme_get_log in nvme_get_fw_slot_info nvme fw-activate operation will get bellow warning log, fix it by update the parameter order [ 113.231513] nvme nvme0: Get FW SLOT INFO log error Fixes: 0e98719b0e4b ("nvme: simplify the API for getting log pages") Reported-by: Sujith Pandel <sujith_pandel@dell.com> Reviewed-by: David Milburn <dmilburn@redhat.com> Signed-off-by: Yi Zhang <yi.zhang@redhat.com> Signed-off-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk> | 14 February 2020, 17:12:04 UTC |
fa46c6f | Keith Busch | 12 February 2020, 16:41:05 UTC | nvme/pci: move cqe check after device shutdown Many users have reported nvme triggered irq_startup() warnings during shutdown. The driver uses the nvme queue's irq to synchronize scanning for completions, and enabling an interrupt affined to only offline CPUs triggers the alarming warning. Move the final CQE check to after disabling the device and all registered interrupts have been torn down so that we do not have any IRQ to synchronize. Link: https://bugzilla.kernel.org/show_bug.cgi?id=206509 Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk> | 14 February 2020, 17:12:04 UTC |
97b2512 | Nigel Kirkland | 11 February 2020, 00:01:45 UTC | nvme: prevent warning triggered by nvme_stop_keep_alive Delayed keep alive work is queued on system workqueue and may be cancelled via nvme_stop_keep_alive from nvme_reset_wq, nvme_fc_wq or nvme_wq. Check_flush_dependency detects mismatched attributes between the work-queue context used to cancel the keep alive work and system-wq. Specifically system-wq does not have the WQ_MEM_RECLAIM flag, whereas the contexts used to cancel keep alive work have WQ_MEM_RECLAIM flag. Example warning: workqueue: WQ_MEM_RECLAIM nvme-reset-wq:nvme_fc_reset_ctrl_work [nvme_fc] is flushing !WQ_MEM_RECLAIM events:nvme_keep_alive_work [nvme_core] To avoid the flags mismatch, delayed keep alive work is queued on nvme_wq. However this creates a secondary concern where work and a request to cancel that work may be in the same work queue - namely err_work in the rdma and tcp transports, which will want to flush/cancel the keep alive work which will now be on nvme_wq. After reviewing the transports, it looks like err_work can be moved to nvme_reset_wq. In fact that aligns them better with transition into RESETTING and performing related reset work in nvme_reset_wq. Change nvme-rdma and nvme-tcp to perform err_work in nvme_reset_wq. Signed-off-by: Nigel Kirkland <nigel.kirkland@broadcom.com> Signed-off-by: James Smart <jsmart2021@gmail.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk> | 14 February 2020, 17:12:04 UTC |
2d570a7 | Anton Eidelman | 10 February 2020, 18:37:18 UTC | nvme/tcp: fix bug on double requeue when send fails When nvme_tcp_io_work() fails to send to socket due to connection close/reset, error_recovery work is triggered from nvme_tcp_state_change() socket callback. This cancels all the active requests in the tagset, which requeues them. The failed request, however, was ended and thus requeued individually as well unless send returned -EPIPE. Another return code to be treated the same way is -ECONNRESET. Double requeue caused BUG_ON(blk_queued_rq(rq)) in blk_mq_requeue_request() from either the individual requeue of the failed request or the bulk requeue from blk_mq_tagset_busy_iter(, nvme_cancel_request, ); Signed-off-by: Anton Eidelman <anton@lightbitslabs.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk> | 14 February 2020, 17:12:04 UTC |
85db6b7 | Ronnie Sahlberg | 13 February 2020, 02:14:47 UTC | cifs: make sure we do not overflow the max EA buffer size RHBZ: 1752437 Before we add a new EA we should check that this will not overflow the maximum buffer we have available to read the EAs back. Otherwise we can get into a situation where the EAs are so big that we can not read them back to the client and thus we can not list EAs anymore or delete them. Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com> Signed-off-by: Steve French <stfrench@microsoft.com> CC: Stable <stable@vger.kernel.org> | 14 February 2020, 17:10:24 UTC |
2c6251a | Steve French | 13 February 2020, 04:37:08 UTC | cifs: enable change notification for SMB2.1 dialect It was originally enabled only for SMB3 or later dialects, but had requests to add it to SMB2.1 mounts as well given the large number of systems at that dialect level. Signed-off-by: Steve French <stfrench@microsoft.com> Reported-by: L Walsh <cifs@tlinx.org> Acked-by: Ronnie Sahlberg <lsahlber@redhat.com> | 14 February 2020, 17:10:06 UTC |
a1fa83b | Randy Dunlap | 13 February 2020, 06:28:20 UTC | netdevice.h: fix all kernel-doc and Sphinx warnings Eliminate all kernel-doc and Sphinx warnings in <linux/netdevice.h>. Fixes these warnings: ../include/linux/netdevice.h:2100: warning: Function parameter or member 'gso_partial_features' not described in 'net_device' ../include/linux/netdevice.h:2100: warning: Function parameter or member 'l3mdev_ops' not described in 'net_device' ../include/linux/netdevice.h:2100: warning: Function parameter or member 'xfrmdev_ops' not described in 'net_device' ../include/linux/netdevice.h:2100: warning: Function parameter or member 'tlsdev_ops' not described in 'net_device' ../include/linux/netdevice.h:2100: warning: Function parameter or member 'name_assign_type' not described in 'net_device' ../include/linux/netdevice.h:2100: warning: Function parameter or member 'ieee802154_ptr' not described in 'net_device' ../include/linux/netdevice.h:2100: warning: Function parameter or member 'mpls_ptr' not described in 'net_device' ../include/linux/netdevice.h:2100: warning: Function parameter or member 'xdp_prog' not described in 'net_device' ../include/linux/netdevice.h:2100: warning: Function parameter or member 'gro_flush_timeout' not described in 'net_device' ../include/linux/netdevice.h:2100: warning: Function parameter or member 'xdp_bulkq' not described in 'net_device' ../include/linux/netdevice.h:2100: warning: Function parameter or member 'xps_cpus_map' not described in 'net_device' ../include/linux/netdevice.h:2100: warning: Function parameter or member 'xps_rxqs_map' not described in 'net_device' ../include/linux/netdevice.h:2100: warning: Function parameter or member 'qdisc_hash' not described in 'net_device' ../include/linux/netdevice.h:3552: WARNING: Inline emphasis start-string without end-string. ../include/linux/netdevice.h:3552: WARNING: Inline emphasis start-string without end-string. Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: David S. Miller <davem@davemloft.net> | 14 February 2020, 15:38:24 UTC |
3ea89fa | David S. Miller | 14 February 2020, 15:34:51 UTC | Merge branch 'dsa-headroom' Per Forlin says: ==================== net: dsa: Make sure there is headroom for tag Sorry for re-posting yet another time.... I manage to include multiple email-senders and forgot to include cover-letter. Let's hope everyhthing is in order this time. Fix two tag drivers to make sure there is headroom for the tag data. ==================== Signed-off-by: David S. Miller <davem@davemloft.net> | 14 February 2020, 15:34:51 UTC |
ddc9aba | Per Forlin | 13 February 2020, 14:37:10 UTC | net: dsa: tag_ar9331: Make sure there is headroom for tag Passing tag size to skb_cow_head will make sure there is enough headroom for the tag data. This change does not introduce any overhead in case there is already available headroom for tag. Signed-off-by: Per Forlin <perfn@axis.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 14 February 2020, 15:34:51 UTC |
04fb912 | Per Forlin | 13 February 2020, 14:37:09 UTC | net: dsa: tag_qca: Make sure there is headroom for tag Passing tag size to skb_cow_head will make sure there is enough headroom for the tag data. This change does not introduce any overhead in case there is already available headroom for tag. Signed-off-by: Per Forlin <perfn@axis.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 14 February 2020, 15:34:51 UTC |
5fdcce2 | William Dauchy | 13 February 2020, 17:19:22 UTC | net, ip6_tunnel: enhance tunnel locate with link check With ipip, it is possible to create an extra interface explicitly attached to a given physical interface: # ip link show tunl0 4: tunl0@NONE: <NOARP> mtu 1480 qdisc noop state DOWN mode DEFAULT group default qlen 1000 link/ipip 0.0.0.0 brd 0.0.0.0 # ip link add tunl1 type ipip dev eth0 # ip link show tunl1 6: tunl1@eth0: <NOARP> mtu 1480 qdisc noop state DOWN mode DEFAULT group default qlen 1000 link/ipip 0.0.0.0 brd 0.0.0.0 But it is not possible with ip6tnl: # ip link show ip6tnl0 5: ip6tnl0@NONE: <NOARP> mtu 1452 qdisc noop state DOWN mode DEFAULT group default qlen 1000 link/tunnel6 :: brd :: # ip link add ip6tnl1 type ip6tnl dev eth0 RTNETLINK answers: File exists This patch aims to make it possible by adding link comparaison in both tunnel locate and lookup functions; we also modify mtu calculation when attached to an interface with a lower mtu. This permits to make use of x-netns communication by moving the newly created tunnel in a given netns. Signed-off-by: William Dauchy <w.dauchy@criteo.com> Reviewed-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 14 February 2020, 15:31:48 UTC |
bab8f1f | Olof Johansson | 14 February 2020, 15:24:38 UTC | Merge tag 'sti-dt-for-5.7-round1' of git://git.kernel.org/pub/scm/linux/kernel/git/pchotard/sti into arm/fixes STi dt fixes: ------------- - remove deprecated Synopsys PHY dt properties - fix sound frame-inversion property * tag 'sti-dt-for-5.7-round1' of git://git.kernel.org/pub/scm/linux/kernel/git/pchotard/sti: ARM: dts: sti: fixup sound frame-inversion for stihxxx-b2120.dtsi ARM: dts: sti: Remove deprecated snps PHY properties for stih410-b2260 Link: https://lore.kernel.org/r/afe20a6d-061b-a93c-2e60-206b0e8d0f81@st.com Signed-off-by: Olof Johansson <olof@lixom.net> | 14 February 2020, 15:24:39 UTC |
b32cb6f | David S. Miller | 14 February 2020, 15:16:08 UTC | Merge tag 'mac80211-for-net-2020-02-14' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211 Johannes Berg says: ==================== Just a few fixes: * avoid running out of tracking space for frames that need to be reported to userspace by using more bits * fix beacon handling suppression by adding some relevant elements to the CRC calculation * fix quiet mode in action frames * fix crash in ethtool for virt_wifi and similar * add a missing policy entry * fix 160 & 80+80 bandwidth to take local capabilities into account ==================== Signed-off-by: David S. Miller <davem@davemloft.net> | 14 February 2020, 15:16:08 UTC |
907e51e | David S. Miller | 14 February 2020, 15:09:36 UTC | Merge branch 'smc-fixes' Karsten Graul says: ==================== net/smc: fixes for -net Fix a syzbot finding and a problem with the CLC handshake content. ==================== Signed-off-by: David S. Miller <davem@davemloft.net> | 14 February 2020, 15:09:36 UTC |
369537c | Ursula Braun | 14 February 2020, 07:59:00 UTC | net/smc: no peer ID in CLC decline for SMCD Just SMCR requires a CLC Peer ID, but not SMCD. The field should be zero for SMCD. Fixes: c758dfddc1b5 ("net/smc: add SMC-D support in CLC messages") Signed-off-by: Ursula Braun <ubraun@linux.ibm.com> Signed-off-by: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 14 February 2020, 15:09:36 UTC |
67f562e | Ursula Braun | 14 February 2020, 07:58:59 UTC | net/smc: transfer fasync_list in case of fallback SMC does not work together with FASTOPEN. If sendmsg() is called with flag MSG_FASTOPEN in SMC_INIT state, the SMC-socket switches to fallback mode. To handle the previous ioctl FIOASYNC call correctly in this case, it is necessary to transfer the socket wait queue fasync_list to the internal TCP socket. Reported-by: syzbot+4b1fe8105f8044a26162@syzkaller.appspotmail.com Fixes: ee9dfbef02d18 ("net/smc: handle sockopts forcing fallback") Signed-off-by: Ursula Braun <ubraun@linux.ibm.com> Signed-off-by: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 14 February 2020, 15:09:36 UTC |
dc221a2 | David S. Miller | 14 February 2020, 15:05:18 UTC | Merge branch 'hns3-fixes' Huazhong Tan says: ==================== net: hns3: fixes for -net This series includes three bugfixes for the HNS3 ethernet driver. [patch 1] fixes a management table lost issue after IMP reset. [patch 2] fixes a VF bandwidth configuration not work problem. [patch 3] fixes a problem related to IPv6 address copying. ==================== Signed-off-by: David S. Miller <davem@davemloft.net> | 14 February 2020, 15:05:18 UTC |
47327c9 | Guangbin Huang | 14 February 2020, 01:53:43 UTC | net: hns3: fix a copying IPv6 address error in hclge_fd_get_flow_tuples() The IPv6 address defined in struct in6_addr is specified as big endian, but there is no specified endian in struct hclge_fd_rule_tuples, so it will cause a problem if directly use memcpy() to copy ipv6 address between these two structures since this field in struct hclge_fd_rule_tuples is little endian. This patch fixes this problem by using be32_to_cpu() to convert endian of IPv6 address of struct in6_addr before copying. Fixes: d93ed94fbeaf ("net: hns3: add aRFS support for PF") Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 14 February 2020, 15:05:17 UTC |
19eb112 | Yonglong Liu | 14 February 2020, 01:53:42 UTC | net: hns3: fix VF bandwidth does not take effect in some case When enabling 4 TC after setting the bandwidth of VF, the bandwidth of VF will resume to default value, because of the qset resources changed in this case. This patch fixes it by using a fixed VF's qset resources according to HNAE3_MAX_TC macro. Fixes: ee9e44248f52 ("net: hns3: add support for configuring bandwidth of VF on the host") Signed-off-by: Yonglong Liu <liuyonglong@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 14 February 2020, 15:05:17 UTC |
d0db7ed | Yufeng Mo | 14 February 2020, 01:53:41 UTC | net: hns3: add management table after IMP reset In the current process, the management table is missing after the IMP reset. This patch adds the management table to the reset process. Fixes: f5aac71c0327 ("net: hns3: add manager table initialization for hardware") Signed-off-by: Yufeng Mo <moyufeng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 14 February 2020, 15:05:17 UTC |
6276594 | Arnaldo Carvalho de Melo | 14 February 2020, 12:34:43 UTC | perf llvm: Fix script used to obtain kernel make directives to work with new kbuild Before this patch: # ./perf test 39 41 39: LLVM search and compile : 39.1: Basic BPF llvm compile : Ok 39.2: kbuild searching : FAILED! 39.3: Compile source for BPF prologue generation : Skip 39.4: Compile source for BPF relocation : Skip 41: BPF filter : 41.1: Basic BPF filtering : Ok 41.2: BPF pinning : Ok 41.3: BPF prologue generation : FAILED! 41.4: BPF relocation checker : Skip # Using 'perf test -v' for these tests shows that it is not finding uapi/linux/fs.h, which ends up being because we don't setup the right header path. Fix it. After this patch: # perf test 39 41 39: LLVM search and compile : 39.1: Basic BPF llvm compile : Ok 39.2: kbuild searching : Ok 39.3: Compile source for BPF prologue generation : Ok 39.4: Compile source for BPF relocation : Ok 41: BPF filter : 41.1: Basic BPF filtering : Ok 41.2: BPF pinning : Ok 41.3: BPF prologue generation : Ok 41.4: BPF relocation checker : Ok # Longer description: In llvm-utils.c we use some techniques to obtain the kbuild make directives and that recently stopped working as now 'ar' gets called and expects to find the dummy.o used to echo these variables: $(NOSTDINC_FLAGS) $(LINUXINCLUDE) $(EXTRA_CFLAGS) Add the $(CC) line to satisfy that, making sure this works with all kernels, i.e. preserving the temp directory and files in it used for this technique we can see that it works everywhere: # make -s -C /lib/modules/5.4.18-100.fc30.x86_64/build M=/tmp/tmp.qgaFHgxjZ4/ clean # ls -la /tmp/tmp.qgaFHgxjZ4/ total 4 drwx------. 2 root root 80 Feb 14 09:42 . drwxrwxrwt. 47 root root 1200 Feb 14 09:42 .. -rw-r--r--. 1 root root 0 Feb 13 17:14 dummy.c -rw-r--r--. 1 root root 121 Feb 13 17:14 Makefile # # cat /tmp/tmp.qgaFHgxjZ4/Makefile obj-y := dummy.o $(obj)/%.o: $(src)/%.c @echo -n "$(NOSTDINC_FLAGS) $(LINUXINCLUDE) $(EXTRA_CFLAGS)" $(CC) -c -o $@ $< # Then build with an old kernel Makefile: # make -s -C /lib/modules/5.4.18-100.fc30.x86_64/build M=/tmp/tmp.qgaFHgxjZ4/ dummy.o -nostdinc -isystem /usr/lib/gcc/x86_64-redhat-linux/9/include -I./arch/x86/include -I./arch/x86/include/generated -I./include -I./arch/x86/include/uapi -I./arch/x86/include/generated/uapi -I./include/uapi -I./include/generated/uapi -include ./include/linux/kconfig.h # # ls -la /tmp/tmp.qgaFHgxjZ4/ total 8 drwx------. 2 root root 100 Feb 14 09:43 . drwxrwxrwt. 47 root root 1200 Feb 14 09:43 .. -rw-r--r--. 1 root root 0 Feb 13 17:14 dummy.c -rw-r--r--. 1 root root 936 Feb 14 09:43 dummy.o -rw-r--r--. 1 root root 121 Feb 13 17:14 Makefile # And a new one: # make -s -C /lib/modules/5.4.18-100.fc30.x86_64/build M=/tmp/tmp.qgaFHgxjZ4/ clean # ls -la /tmp/tmp.qgaFHgxjZ4/ total 4 drwx------. 2 root root 80 Feb 14 09:43 . drwxrwxrwt. 47 root root 1200 Feb 14 09:43 .. -rw-r--r--. 1 root root 0 Feb 13 17:14 dummy.c -rw-r--r--. 1 root root 121 Feb 13 17:14 Makefile # make -s -C /lib/modules/5.6.0-rc1+/build M=/tmp/tmp.qgaFHgxjZ4/ dummy.o -nostdinc -isystem /usr/lib/gcc/x86_64-redhat-linux/9/include -I/home/acme/git/linux/arch/x86/include -I./arch/x86/include/generated -I/home/acme/git/linux/include -I./include -I/home/acme/git/linux/arch/x86/include/uapi -I./arch/x86/include/generated/uapi -I/home/acme/git/linux/include/uapi -I./include/generated/uapi -include /home/acme/git/linux/include/linux/kconfig.h # # ls -la /tmp/tmp.qgaFHgxjZ4/ total 16 drwx------. 2 root root 160 Feb 14 09:44 . drwxrwxrwt. 47 root root 1200 Feb 14 09:44 .. -rw-r--r--. 1 root root 158 Feb 14 09:44 built-in.a -rw-r--r--. 1 root root 149 Feb 14 09:44 .built-in.a.cmd -rw-r--r--. 1 root root 0 Feb 13 17:14 dummy.c -rw-r--r--. 1 root root 936 Feb 14 09:44 dummy.o -rw-r--r--. 1 root root 121 Feb 13 17:14 Makefile -rw-r--r--. 1 root root 0 Feb 14 09:44 modules.order # Reported-by: Thomas Richter <tmricht@linux.ibm.com> Tested-by: Thomas Richter <tmricht@linux.ibm.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: He Kuang <hekuang@huawei.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Masahiro Yamada <masahiroy@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Sumanth Korikkar <sumanthk@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Wang Nan <wangnan0@huawei.com> Cc: Zefan Li <lizefan@huawei.com> Link: https://www.spinics.net/lists/linux-perf-users/msg10600.html Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> | 14 February 2020, 13:06:00 UTC |
3629ac5 | Rafael J. Wysocki | 14 February 2020, 09:40:48 UTC | Merge branch 'pm-cpufreq' * pm-cpufreq: cpufreq: Make cpufreq_global_kobject static | 14 February 2020, 09:40:48 UTC |
33181ea | Shay Bar | 10 February 2020, 13:07:28 UTC | mac80211: fix wrong 160/80+80 MHz setting Before this patch, STA's would set new width of 160/80+80 MHz based on AP capability only. This is wrong because STA may not support > 80MHz BW. Fix is to verify STA has 160/80+80 MHz capability before increasing its width to > 80MHz. The "support_80_80" and "support_160" setting is based on: "Table 9-272 — Setting of the Supported Channel Width Set subfield and Extended NSS BW Support subfield at a STA transmitting the VHT Capabilities Information field" From "Draft P802.11REVmd_D3.0.pdf" Signed-off-by: Aviad Brikman <aviad.brikman@celeno.com> Signed-off-by: Shay Bar <shay.bar@celeno.com> Link: https://lore.kernel.org/r/20200210130728.23674-1-shay.bar@celeno.com Signed-off-by: Johannes Berg <johannes.berg@intel.com> | 14 February 2020, 08:54:12 UTC |
ea75080 | Sergey Matyukevich | 13 February 2020, 13:16:16 UTC | cfg80211: add missing policy for NL80211_ATTR_STATUS_CODE The nl80211_policy is missing for NL80211_ATTR_STATUS_CODE attribute. As a result, for strictly validated commands, it's assumed to not be supported. Signed-off-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com> Link: https://lore.kernel.org/r/20200213131608.10541-2-sergey.matyukevich.os@quantenna.com Signed-off-by: Johannes Berg <johannes.berg@intel.com> | 14 February 2020, 08:50:37 UTC |
6f4134b | Dave Airlie | 14 February 2020, 03:03:51 UTC | Merge tag 'drm-intel-next-fixes-2020-02-13' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes drm/i915 fixes for v5.6-rc2 Most of these were aimed at a "next fixes" pull already during the merge window, but there were issues with the baseline I used, which resulted in a lot of issues in CI. I've regenerated this stuff piecemeal now, adding gradually to it, and it seems healthy now. Due to the issues this is much bigger than I'd like. But it was obviously necessary to take the time to ensure it's not garbage... Signed-off-by: Dave Airlie <airlied@redhat.com> From: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/878sl6yfrn.fsf@intel.com | 14 February 2020, 03:04:46 UTC |
e44c1e3 | Dave Airlie | 14 February 2020, 03:00:56 UTC | Merge tag 'amd-drm-fixes-5.6-2020-02-12' of git://people.freedesktop.org/~agd5f/linux into drm-fixes amd-drm-fixes-5.6-2020-02-12: amdgpu: - Additional OD fixes for navi - Misc display fixes - VCN 2.5 DPG fix - Prevent build errors on PowerPC on some configs - GDS EDC fix Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexdeucher@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200212224746.3992-1-alexander.deucher@amd.com | 14 February 2020, 03:00:57 UTC |
7ebdc26 | Dave Airlie | 14 February 2020, 02:57:47 UTC | Merge tag 'drm-misc-next-fixes-2020-02-07' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixes drm-misc-next fixes for v5.6: - Fix build error in drm/edid. - Plug close-after-free race in vgem_gem_create. - Handle CONFIG_DMA_API_DEBUG_SG better in drm/msm. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/551b6183-a581-9d12-10a9-24cd929de425@linux.intel.com | 14 February 2020, 02:57:57 UTC |
984f010 | Dave Airlie | 14 February 2020, 02:52:49 UTC | Merge tag 'drm-misc-fixes-2020-02-07' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixes Fixes for v5.6: - Revert allow_fb_modifiers in sun4i, as it causes a regression for DE2 and DE3. - Fix null pointer deref in drm_dp_mst_process_up_req(). Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/672810c3-4212-0a46-337b-2cb855573fd2@linux.intel.com | 14 February 2020, 02:53:00 UTC |
5179a9d | Benjamin Tissoires | 14 February 2020, 01:07:47 UTC | Input: synaptics - remove the LEN0049 dmi id from topbuttonpad list The Yoga 11e is using LEN0049, but it doesn't have a trackstick. Thus, there is no need to create a software top buttons row. However, it seems that the device works under SMBus, so keep it as part of the smbus_pnp_ids. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20200115013023.9710-1-benjamin.tissoires@redhat.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> | 14 February 2020, 01:09:49 UTC |
b8a3d81 | Gaurav Agrawal | 14 February 2020, 01:06:10 UTC | Input: synaptics - enable SMBus on ThinkPad L470 Add touchpad LEN2044 to the list, as it is capable of working with psmouse.synaptics_intertouch=1 Signed-off-by: Gaurav Agrawal <agrawalgaurav@gnome.org> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/CADdtggVzVJq5gGNmFhKSz2MBwjTpdN5YVOdr4D3Hkkv=KZRc9g@mail.gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> | 14 February 2020, 01:09:49 UTC |
bf50239 | Lyude Paul | 14 February 2020, 00:59:15 UTC | Input: synaptics - switch T470s to RMI4 by default This supports RMI4 and everything seems to work, including the touchpad buttons. So, let's enable this by default. Signed-off-by: Lyude Paul <lyude@redhat.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20200204194322.112638-1-lyude@redhat.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> | 14 February 2020, 01:09:48 UTC |
a1b9b65 | Gustavo A. R. Silva | 14 February 2020, 00:57:00 UTC | Input: gpio_keys - replace zero-length array with flexible-array member The current codebase makes use of the zero-length array language extension to the C90 standard, but the preferred mechanism to declare variable-length types such as these ones is a flexible array member[1][2], introduced in C99: struct foo { int stuff; struct boo array[]; }; By making use of the mechanism above, we will get a compiler warning in case the flexible array does not occur last in the structure, which will help us prevent some kind of undefined behavior bugs from being inadvertently introduced[3] to the codebase from now on. Also, notice that, dynamic memory allocations won't be affected by this change: "Flexible array members have incomplete type, and so the sizeof operator may not be applied. As a quirk of the original implementation of zero-length arrays, sizeof evaluates to zero."[1] This issue was found with the help of Coccinelle. [1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html [2] https://github.com/KSPP/linux/issues/21 [3] commit 76497732932f ("cxgb3/l2t: Fix undefined behaviour") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Link: https://lore.kernel.org/r/20200213002600.GA31916@embeddedor.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> | 14 February 2020, 01:09:47 UTC |
cfb8d78 | Gustavo A. R. Silva | 14 February 2020, 00:56:48 UTC | Input: goldfish_events - replace zero-length array with flexible-array member The current codebase makes use of the zero-length array language extension to the C90 standard, but the preferred mechanism to declare variable-length types such as these ones is a flexible array member[1][2], introduced in C99: struct foo { int stuff; struct boo array[]; }; By making use of the mechanism above, we will get a compiler warning in case the flexible array does not occur last in the structure, which will help us prevent some kind of undefined behavior bugs from being inadvertently introduced[3] to the codebase from now on. Also, notice that, dynamic memory allocations won't be affected by this change: "Flexible array members have incomplete type, and so the sizeof operator may not be applied. As a quirk of the original implementation of zero-length arrays, sizeof evaluates to zero."[1] This issue was found with the help of Coccinelle. [1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html [2] https://github.com/KSPP/linux/issues/21 [3] commit 76497732932f ("cxgb3/l2t: Fix undefined behaviour") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Link: https://lore.kernel.org/r/20200213002430.GA31056@embeddedor.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> | 14 February 2020, 01:09:47 UTC |
2ca1025 | Jens Axboe | 14 February 2020, 00:17:35 UTC | io_uring: prune request from overflow list on flush Carter reported an issue where he could produce a stall on ring exit, when we're cleaning up requests that match the given file table. For this particular test case, a combination of a few things caused the issue: - The cq ring was overflown - The request being canceled was in the overflow list The combination of the above means that the cq overflow list holds a reference to the request. The request is canceled correctly, but since the overflow list holds a reference to it, the final put won't happen. Since the final put doesn't happen, the request remains in the inflight. Hence we never finish the cancelation flush. Fix this by removing requests from the overflow list if we're canceling them. Cc: stable@vger.kernel.org # 5.5 Reported-by: Carter Li 李通洲 <carter.li@eoitek.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> | 14 February 2020, 00:25:01 UTC |
b19e8c6 | Linus Torvalds | 13 February 2020, 22:36:57 UTC | Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 fixes from Will Deacon: "Summary below, but it's all reasonably straightforward. There are some more fixes on the horizon, but nothing disastrous yet. Summary: - Fix build when KASLR is enabled but CONFIG_ARCH_RANDOM is not set - Fix context-switching of SSBS state on systems that implement it - Fix spinlock compiler warning introduced during the merge window - Fix incorrect header inclusion (linux/clk-provider.h) - Use SYSCTL_{ZERO,ONE} instead of rolling our own static variables - Don't scream if optional SMMUv3 PMU irq is missing - Remove some unused function prototypes" * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: time: Replace <linux/clk-provider.h> by <linux/of_clk.h> arm64: Fix CONFIG_ARCH_RANDOM=n build perf/smmuv3: Use platform_get_irq_optional() for wired interrupt arm64/spinlock: fix a -Wunused-function warning arm64: ssbs: Fix context-switch when SSBS is present on all CPUs arm64: use shared sysctl constants arm64: Drop do_el0_ia_bp_hardening() & do_sp_pc_abort() declarations | 13 February 2020, 22:36:57 UTC |
1d40890 | Linus Torvalds | 13 February 2020, 22:34:58 UTC | Merge tag 'gpio-v5.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO fixes from Linus Walleij: - Revert two patches to gpio_do_set_config() and implement the proper solution that works, also drop an unecessary call in set_config() - Fix up the lockdep class for hierarchical IRQ domains. - Remove some bridge code for line directions. - Fix a register access bug in the Xilinx driver. * tag 'gpio-v5.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: gpio: sifive: fix static checker warning spmi: pmic-arb: Set lockdep class for hierarchical irq domains gpio: xilinx: Fix bug where the wrong GPIO register is written to gpiolib: remove unnecessary argument from set_config call gpio: bd71828: Remove unneeded defines for GPIO_LINE_DIRECTION_IN/OUT MAINTAINERS: Sort entries in database for GPIO gpiolib: fix gpio_do_set_config() Revert "gpiolib: remove set but not used variable 'config'" Revert "gpiolib: Remove duplicated function gpio_do_set_config()" | 13 February 2020, 22:34:58 UTC |
803381f | David S. Miller | 13 February 2020, 22:19:00 UTC | Merge branch 'icmp-account-for-NAT-when-sending-icmps-from-ndo-layer' Jason A. Donenfeld says: ==================== icmp: account for NAT when sending icmps from ndo layer The ICMP routines use the source address for two reasons: 1. Rate-limiting ICMP transmissions based on source address, so that one source address cannot provoke a flood of replies. If the source address is wrong, the rate limiting will be incorrectly applied. 2. Choosing the interface and hence new source address of the generated ICMP packet. If the original packet source address is wrong, ICMP replies will be sent from the wrong source address, resulting in either a misdelivery, infoleak, or just general network admin confusion. Most of the time, the icmp_send and icmpv6_send routines can just reach down into the skb's IP header to determine the saddr. However, if icmp_send or icmpv6_send is being called from a network device driver -- there are a few in the tree -- then it's possible that by the time icmp_send or icmpv6_send looks at the packet, the packet's source address has already been transformed by SNAT or MASQUERADE or some other transformation that CONNTRACK knows about. In this case, the packet's source address is most certainly the *wrong* source address to be used for the purpose of ICMP replies. Rather, the source address we want to use for ICMP replies is the original one, from before the transformation occurred. Fortunately, it's very easy to just ask CONNTRACK if it knows about this packet, and if so, how to fix it up. The saddr is the only field in the header we need to fix up, for the purposes of the subsequent processing in the icmp_send and icmpv6_send functions, so we do the lookup very early on, so that the rest of the ICMP machinery can progress as usual. Changes v3->v4: - Add back the skb_shared checking, since the previous assumption isn't actually true [Eric]. This implies dropping the additional patches v3 had for removing skb_share_check from various drivers. We can revisit that general set of ideas later, but that's probably better suited as a net-next patchset rather than this stable one which is geared at fixing bugs. So, this implements things in the safe conservative way. Changes v2->v3: - Add selftest to ensure this actually does what we want and never regresses. - Check the size of the skb header before operating on it. - Use skb_ensure_writable to ensure we can modify the cloned skb [Florian]. - Conditionalize this on IPS_SRC_NAT so we don't do anything unnecessarily [Florian]. - It turns out that since we're calling these from the xmit path, skb_share_check isn't required, so remove that [Florian]. This simplifes the code a bit too. **The supposition here is that skbs passed to ndo_start_xmit are _never_ shared. If this is not correct NOW IS THE TIME TO PIPE UP, for doom awaits us later.** - While investigating the shared skb business, several drivers appeared to be calling it incorrectly in the xmit path, so this series also removes those unnecessary calls, based on the supposition mentioned in the previous point. Changes v1->v2: - icmpv6 takes subtly different types than icmpv4, like u32 instead of be32, u8 instead of int. - Since we're technically writing to the skb, we need to make sure it's not a shared one [Dave, 2017]. - Restore the original skb data after icmp_send returns. All current users are freeing the packet right after, so it doesn't matter, but future users might not. - Remove superfluous route lookup in sunvnet [Dave]. - Use NF_NAT instead of NF_CONNTRACK for condition [Florian]. - Include this cover letter [Dave]. ==================== Signed-off-by: David S. Miller <davem@davemloft.net> | 13 February 2020, 22:19:00 UTC |
45942ba | Jason A. Donenfeld | 11 February 2020, 19:47:09 UTC | xfrm: interface: use icmp_ndo_send helper Because xfrmi is calling icmp from network device context, it should use the ndo helper so that the rate limiting applies correctly. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Cc: Nicolas Dichtel <nicolas.dichtel@6wind.com> Cc: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 13 February 2020, 22:19:00 UTC |
a12d7f3 | Jason A. Donenfeld | 11 February 2020, 19:47:08 UTC | wireguard: device: use icmp_ndo_send helper Because wireguard is calling icmp from network device context, it should use the ndo helper so that the rate limiting applies correctly. This commit adds a small test to the wireguard test suite to ensure that the new functions continue doing the right thing in the context of wireguard. It does this by setting up a condition that will definately evoke an icmp error message from the driver, but along a nat'd path. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 13 February 2020, 22:19:00 UTC |
67c9a7e | Jason A. Donenfeld | 11 February 2020, 19:47:07 UTC | sunvnet: use icmp_ndo_send helper Because sunvnet is calling icmp from network device context, it should use the ndo helper so that the rate limiting applies correctly. While we're at it, doing the additional route lookup before calling icmp_ndo_send is superfluous, since this is the job of the icmp code in the first place. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Cc: Shannon Nelson <shannon.nelson@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 13 February 2020, 22:19:00 UTC |
e0fce6f | Jason A. Donenfeld | 11 February 2020, 19:47:06 UTC | gtp: use icmp_ndo_send helper Because gtp is calling icmp from network device context, it should use the ndo helper so that the rate limiting applies correctly. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Cc: Harald Welte <laforge@gnumonks.org> Signed-off-by: David S. Miller <davem@davemloft.net> | 13 February 2020, 22:19:00 UTC |
0b41713 | Jason A. Donenfeld | 11 February 2020, 19:47:05 UTC | icmp: introduce helper for nat'd source address in network device context This introduces a helper function to be called only by network drivers that wraps calls to icmp[v6]_send in a conntrack transformation, in case NAT has been used. We don't want to pollute the non-driver path, though, so we introduce this as a helper to be called by places that actually make use of this, as suggested by Florian. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Cc: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net> | 13 February 2020, 22:19:00 UTC |
64ae134 | Linus Torvalds | 13 February 2020, 22:17:39 UTC | Merge branch 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto fix from Herbert Xu: "This fixes a Kconfig anomaly when lib/crypto is enabled without Crypto API" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: Kconfig - allow tests to be disabled when manager is disabled | 13 February 2020, 22:17:39 UTC |
07134cf | David S. Miller | 13 February 2020, 22:16:35 UTC | Merge branch 'skip_sw-skip_hw-validation' Davide Caratti says: ==================== add missing validation of 'skip_hw/skip_sw' ensure that all classifiers currently supporting HW offload validate the 'flags' parameter provided by user: - patch 1/2 fixes cls_matchall - patch 2/2 fixes cls_flower ==================== Signed-off-by: David S. Miller <davem@davemloft.net> | 13 February 2020, 22:16:35 UTC |
e2debf0 | Davide Caratti | 11 February 2020, 18:33:40 UTC | net/sched: flower: add missing validation of TCA_FLOWER_FLAGS unlike other classifiers that can be offloaded (i.e. users can set flags like 'skip_hw' and 'skip_sw'), 'cls_flower' doesn't validate the size of netlink attribute 'TCA_FLOWER_FLAGS' provided by user: add a proper entry to fl_policy. Fixes: 5b33f48842fa ("net/flower: Introduce hardware offload support") Signed-off-by: Davide Caratti <dcaratti@redhat.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 13 February 2020, 22:16:35 UTC |
1afa3cc | Davide Caratti | 11 February 2020, 18:33:39 UTC | net/sched: matchall: add missing validation of TCA_MATCHALL_FLAGS unlike other classifiers that can be offloaded (i.e. users can set flags like 'skip_hw' and 'skip_sw'), 'cls_matchall' doesn't validate the size of netlink attribute 'TCA_MATCHALL_FLAGS' provided by user: add a proper entry to mall_policy. Fixes: b87f7936a932 ("net/sched: Add match-all classifier hw offloading.") Signed-off-by: Davide Caratti <dcaratti@redhat.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 13 February 2020, 22:16:35 UTC |
6ee2deb | Hangbin Liu | 11 February 2020, 10:31:54 UTC | net/flow_dissector: remove unexist field description @thoff has moved to struct flow_dissector_key_control. Fixes: 42aecaa9bb2b ("net: Get skb hash over flow_keys structure") Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 13 February 2020, 22:13:27 UTC |
304db6c | Li RongQing | 11 February 2020, 02:13:44 UTC | page_pool: refill page when alloc.count of pool is zero "do {} while" in page_pool_refill_alloc_cache will always refill page once whether refill is true or false, and whether alloc.count of pool is less than PP_ALLOC_CACHE_REFILL or not this is wrong, and will cause overflow of pool->alloc.cache the caller of __page_pool_get_cached should provide guarantee that pool->alloc.cache is safe to access, so in_serving_softirq should be removed as suggested by Jesper Dangaard Brouer in https://patchwork.ozlabs.org/patch/1233713/ so fix this issue by calling page_pool_refill_alloc_cache() only when pool->alloc.count is zero Fixes: 44768decb7c0 ("page_pool: handle page recycle for NUMA_NO_NODE condition") Signed-off-by: Li RongQing <lirongqing@baidu.com> Suggested-by: Jesper Dangaard Brouer <brouer@redhat.com> Acked-by: Jesper Dangaard Brouer <brouer@redhat.com> Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net> | 13 February 2020, 22:11:51 UTC |
89e960b | David S. Miller | 13 February 2020, 22:10:11 UTC | Merge branch '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-queue Jeff Kirsher says: ==================== Intel Wired LAN Driver Updates 2020-02-12 This series contains fixes to only the ice driver. Dave fixes logic flaws in the DCB rebuild function which is used after a reset. Also fixed a configuration issue when switching between firmware and software LLDP mode where the number of TLV's configured was getting out of sync with what lldpad thinks is configured. Paul fixes how the driver displayed all the supported and advertised link modes by basing it on the PHY capabilities, and in the process cleaned up a lot of code. Brett fixes duplicate receive tail bumps by comparing the value we are writing to tail with the previously written tail value. Also cleaned up workarounds that are no longer needed with the latest NVM images. Anirudh cleaned up unnecessary CONFIG_PCI_IOV wrappers. Updated the driver to use ice_pf_to_dev() instead of &pf->pdev->dev or &vsi->back->pdev->dev. Cleaned up the string format in print function calls to remove newlines where applicable. Akeem updates the link message logging to include "Full Duplex" and "Negotiated", to help distinguish from "Requested" for FEC. Bruce fixes and consolidates the logging of firmware/NVM information during driver load, since the information is duplicate of what is available via ethtool. Fixed the checking of the Unit Load Status bits after reset to ensure they are 0x7FF before continuing, by updating the mask. Cleanup up possible NULL dereferences that were created by a previous commit. Ben fixes the driver to use the correct netif_msg_tx/rx_error() to determine whether to print the MDD event type. Tony provides several trivial fixes, which include whitespace, typos, function header comments, reverse Christmas tree issues. ==================== Signed-off-by: David S. Miller <davem@davemloft.net> | 13 February 2020, 22:10:11 UTC |
5d63944 | Trond Myklebust | 13 February 2020, 19:51:07 UTC | NFSv4: Ensure the delegation cred is pinned when we call delegreturn Ensure we don't release the delegation cred during the call to nfs4_proc_delegreturn(). Fixes: ee05f456772d ("NFSv4: Fix races between open and delegreturn") Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> | 13 February 2020, 21:23:02 UTC |
8c75593 | Trond Myklebust | 13 February 2020, 19:51:06 UTC | NFSv4: Ensure the delegation is pinned in nfs_do_return_delegation() The call to nfs_do_return_delegation() needs to be taken without any RCU locks. Add a refcount to make sure the delegation remains pinned in memory until we're done. Fixes: ee05f456772d ("NFSv4: Fix races between open and delegreturn") Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> | 13 February 2020, 21:18:50 UTC |
cd1b659 | Olga Kornievskaia | 12 February 2020, 22:32:12 UTC | NFSv4.1 make cachethis=no for writes Turning caching off for writes on the server should improve performance. Fixes: fba83f34119a ("NFS: Pass "privileged" value to nfs4_init_sequence()") Signed-off-by: Olga Kornievskaia <kolga@netapp.com> Reviewed-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> | 13 February 2020, 20:37:18 UTC |
ca1c671 | Chuck Lever | 12 February 2020, 16:12:30 UTC | xprtrdma: Fix DMA scatter-gather list mapping imbalance The @nents value that was passed to ib_dma_map_sg() has to be passed to the matching ib_dma_unmap_sg() call. If ib_dma_map_sg() choses to concatenate sg entries, it will return a different nents value than it was passed. The bug was exposed by recent changes to the AMD IOMMU driver, which enabled sg entry concatenation. Looking all the way back to commit 4143f34e01e9 ("xprtrdma: Port to new memory registration API") and reviewing other kernel ULPs, it's not clear that the frwr_map() logic was ever correct for this case. Reported-by: Andre Tomt <andre@tomt.net> Suggested-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Cc: stable@vger.kernel.org Reviewed-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> | 13 February 2020, 20:35:33 UTC |
c96dcee | zhangyi (F) | 13 February 2020, 06:38:21 UTC | jbd2: do not clear the BH_Mapped flag when forgetting a metadata buffer Commit 904cdbd41d74 ("jbd2: clear dirty flag when revoking a buffer from an older transaction") set the BH_Freed flag when forgetting a metadata buffer which belongs to the committing transaction, it indicate the committing process clear dirty bits when it is done with the buffer. But it also clear the BH_Mapped flag at the same time, which may trigger below NULL pointer oops when block_size < PAGE_SIZE. rmdir 1 kjournald2 mkdir 2 jbd2_journal_commit_transaction commit transaction N jbd2_journal_forget set_buffer_freed(bh1) jbd2_journal_commit_transaction commit transaction N+1 ... clear_buffer_mapped(bh1) ext4_getblk(bh2 ummapped) ... grow_dev_page init_page_buffers bh1->b_private=NULL bh2->b_private=NULL jbd2_journal_put_journal_head(jh1) __journal_remove_journal_head(hb1) jh1 is NULL and trigger oops *) Dir entry block bh1 and bh2 belongs to one page, and the bh2 has already been unmapped. For the metadata buffer we forgetting, we should always keep the mapped flag and clear the dirty flags is enough, so this patch pick out the these buffers and keep their BH_Mapped flag. Link: https://lore.kernel.org/r/20200213063821.30455-3-yi.zhang@huawei.com Fixes: 904cdbd41d74 ("jbd2: clear dirty flag when revoking a buffer from an older transaction") Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: zhangyi (F) <yi.zhang@huawei.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@kernel.org | 13 February 2020, 17:06:28 UTC |
6a66a7d | zhangyi (F) | 13 February 2020, 06:38:20 UTC | jbd2: move the clearing of b_modified flag to the journal_unmap_buffer() There is no need to delay the clearing of b_modified flag to the transaction committing time when unmapping the journalled buffer, so just move it to the journal_unmap_buffer(). Link: https://lore.kernel.org/r/20200213063821.30455-2-yi.zhang@huawei.com Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: zhangyi (F) <yi.zhang@huawei.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@kernel.org | 13 February 2020, 17:06:17 UTC |
af133ad | Shijie Luo | 11 February 2020, 01:17:52 UTC | ext4: add cond_resched() to ext4_protect_reserved_inode When journal size is set too big by "mkfs.ext4 -J size=", or when we mount a crafted image to make journal inode->i_size too big, the loop, "while (i < num)", holds cpu too long. This could cause soft lockup. [ 529.357541] Call trace: [ 529.357551] dump_backtrace+0x0/0x198 [ 529.357555] show_stack+0x24/0x30 [ 529.357562] dump_stack+0xa4/0xcc [ 529.357568] watchdog_timer_fn+0x300/0x3e8 [ 529.357574] __hrtimer_run_queues+0x114/0x358 [ 529.357576] hrtimer_interrupt+0x104/0x2d8 [ 529.357580] arch_timer_handler_virt+0x38/0x58 [ 529.357584] handle_percpu_devid_irq+0x90/0x248 [ 529.357588] generic_handle_irq+0x34/0x50 [ 529.357590] __handle_domain_irq+0x68/0xc0 [ 529.357593] gic_handle_irq+0x6c/0x150 [ 529.357595] el1_irq+0xb8/0x140 [ 529.357599] __ll_sc_atomic_add_return_acquire+0x14/0x20 [ 529.357668] ext4_map_blocks+0x64/0x5c0 [ext4] [ 529.357693] ext4_setup_system_zone+0x330/0x458 [ext4] [ 529.357717] ext4_fill_super+0x2170/0x2ba8 [ext4] [ 529.357722] mount_bdev+0x1a8/0x1e8 [ 529.357746] ext4_mount+0x44/0x58 [ext4] [ 529.357748] mount_fs+0x50/0x170 [ 529.357752] vfs_kern_mount.part.9+0x54/0x188 [ 529.357755] do_mount+0x5ac/0xd78 [ 529.357758] ksys_mount+0x9c/0x118 [ 529.357760] __arm64_sys_mount+0x28/0x38 [ 529.357764] el0_svc_common+0x78/0x130 [ 529.357766] el0_svc_handler+0x38/0x78 [ 529.357769] el0_svc+0x8/0xc [ 541.356516] watchdog: BUG: soft lockup - CPU#0 stuck for 23s! [mount:18674] Link: https://lore.kernel.org/r/20200211011752.29242-1-luoshijie1@huawei.com Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Shijie Luo <luoshijie1@huawei.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@kernel.org | 13 February 2020, 16:56:26 UTC |
48a3431 | Jan Kara | 10 February 2020, 14:43:16 UTC | ext4: fix checksum errors with indexed dirs DIR_INDEX has been introduced as a compat ext4 feature. That means that even kernels / tools that don't understand the feature may modify the filesystem. This works because for kernels not understanding indexed dir format, internal htree nodes appear just as empty directory entries. Index dir aware kernels then check the htree structure is still consistent before using the data. This all worked reasonably well until metadata checksums were introduced. The problem is that these effectively made DIR_INDEX only ro-compatible because internal htree nodes store checksums in a different place than normal directory blocks. Thus any modification ignorant to DIR_INDEX (or just clearing EXT4_INDEX_FL from the inode) will effectively cause checksum mismatch and trigger kernel errors. So we have to be more careful when dealing with indexed directories on filesystems with checksumming enabled. 1) We just disallow loading any directory inodes with EXT4_INDEX_FL when DIR_INDEX is not enabled. This is harsh but it should be very rare (it means someone disabled DIR_INDEX on existing filesystem and didn't run e2fsck), e2fsck can fix the problem, and we don't want to answer the difficult question: "Should we rather corrupt the directory more or should we ignore that DIR_INDEX feature is not set?" 2) When we find out htree structure is corrupted (but the filesystem and the directory should in support htrees), we continue just ignoring htree information for reading but we refuse to add new entries to the directory to avoid corrupting it more. Link: https://lore.kernel.org/r/20200210144316.22081-1-jack@suse.cz Fixes: dbe89444042a ("ext4: Calculate and verify checksums for htree nodes") Reviewed-by: Andreas Dilger <adilger@dilger.ca> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@kernel.org | 13 February 2020, 16:56:19 UTC |
4f97a68 | Theodore Ts'o | 06 February 2020, 22:35:01 UTC | ext4: fix support for inode sizes > 1024 bytes A recent commit, 9803387c55f7 ("ext4: validate the debug_want_extra_isize mount option at parse time"), moved mount-time checks around. One of those changes moved the inode size check before the blocksize variable was set to the blocksize of the file system. After 9803387c55f7 was set to the minimum allowable blocksize, which in practice on most systems would be 1024 bytes. This cuased file systems with inode sizes larger than 1024 bytes to be rejected with a message: EXT4-fs (sdXX): unsupported inode size: 4096 Fixes: 9803387c55f7 ("ext4: validate the debug_want_extra_isize mount option at parse time") Link: https://lore.kernel.org/r/20200206225252.GA3673@mit.edu Reported-by: Herbert Poetzl <herbert@13thfloor.at> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@kernel.org | 13 February 2020, 16:54:08 UTC |
c7ff857 | Harald Freudenberger | 22 January 2020, 13:43:23 UTC | crypto/testmgr: enable selftests for paes-s390 ciphers This patch enables the selftests for the s390 specific protected key AES (PAES) cipher implementations: * cbc-paes-s390 * ctr-paes-s390 * ecb-paes-s390 * xts-paes-s390 PAES is an AES cipher but with encrypted ('protected') key material. However, the paes ciphers are able to derive an protected key from clear key material with the help of the pkey kernel module. So this patch now enables the generic AES tests for the paes ciphers. Under the hood the setkey() functions rearrange the clear key values as clear key token and so the pkey kernel module is able to provide protected key blobs from the given clear key values. The derived protected key blobs are then used within the paes cipers and should produce the very same results as the generic AES implementation with the clear key values. The s390-paes cipher testlist entries are surrounded by #if IS_ENABLED(CONFIG_CRYPTO_PAES_S390) because they don't make any sense on non s390 platforms or without the PAES cipher implementation. Link: http://lkml.kernel.org/r/20200213083946.zicarnnt3wizl5ty@gondor.apana.org.au Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Harald Freudenberger <freude@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> | 13 February 2020, 16:53:24 UTC |
46d3688 | Jan Kara | 30 January 2020, 11:11:48 UTC | ext4: simplify checking quota limits in ext4_statfs() Coverity reports that conditions checking quota limits in ext4_statfs() contain dead code. Indeed it is right and current conditions can be simplified. Link: https://lore.kernel.org/r/20200130111148.10766-1-jack@suse.cz Reported-by: Coverity <scan-admin@coverity.com> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@kernel.org | 13 February 2020, 16:53:11 UTC |
14c9ca0 | Andreas Dilger | 26 January 2020, 22:03:34 UTC | ext4: don't assume that mmp_nodename/bdevname have NUL Don't assume that the mmp_nodename and mmp_bdevname strings are NUL terminated, since they are filled in by snprintf(), which is not guaranteed to do so. Link: https://lore.kernel.org/r/1580076215-1048-1-git-send-email-adilger@dilger.ca Signed-off-by: Andreas Dilger <adilger@dilger.ca> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@kernel.org | 13 February 2020, 16:53:10 UTC |
1dd0178 | Leon Romanovsky | 12 February 2020, 08:06:51 UTC | RDMA/core: Fix protection fault in get_pkey_idx_qp_list We don't need to set pkey as valid in case that user set only one of pkey index or port number, otherwise it will be resulted in NULL pointer dereference while accessing to uninitialized pkey list. The following crash from Syzkaller revealed it. kasan: CONFIG_KASAN_INLINE enabled kasan: GPF could be caused by NULL-ptr deref or user memory access general protection fault: 0000 [#1] SMP KASAN PTI CPU: 1 PID: 14753 Comm: syz-executor.2 Not tainted 5.5.0-rc5 #2 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014 RIP: 0010:get_pkey_idx_qp_list+0x161/0x2d0 Code: 01 00 00 49 8b 5e 20 4c 39 e3 0f 84 b9 00 00 00 e8 e4 42 6e fe 48 8d 7b 10 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <0f> b6 04 02 84 c0 74 08 3c 01 0f 8e d0 00 00 00 48 8d 7d 04 48 b8 RSP: 0018:ffffc9000bc6f950 EFLAGS: 00010202 RAX: dffffc0000000000 RBX: 0000000000000000 RCX: ffffffff82c8bdec RDX: 0000000000000002 RSI: ffffc900030a8000 RDI: 0000000000000010 RBP: ffff888112c8ce80 R08: 0000000000000004 R09: fffff5200178df1f R10: 0000000000000001 R11: fffff5200178df1f R12: ffff888115dc4430 R13: ffff888115da8498 R14: ffff888115dc4410 R15: ffff888115da8000 FS: 00007f20777de700(0000) GS:ffff88811b100000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000001b2f721000 CR3: 00000001173ca002 CR4: 0000000000360ee0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: port_pkey_list_insert+0xd7/0x7c0 ib_security_modify_qp+0x6fa/0xfc0 _ib_modify_qp+0x8c4/0xbf0 modify_qp+0x10da/0x16d0 ib_uverbs_modify_qp+0x9a/0x100 ib_uverbs_write+0xaa5/0xdf0 __vfs_write+0x7c/0x100 vfs_write+0x168/0x4a0 ksys_write+0xc8/0x200 do_syscall_64+0x9c/0x390 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fixes: d291f1a65232 ("IB/core: Enforce PKey security on QPs") Link: https://lore.kernel.org/r/20200212080651.GB679970@unreal Signed-off-by: Maor Gottlieb <maorg@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Message-Id: <20200212080651.GB679970@unreal> | 13 February 2020, 16:31:56 UTC |
4ec31cb | Coly Li | 13 February 2020, 14:12:07 UTC | bcache: remove macro nr_to_fifo_front() Macro nr_to_fifo_front() is only used once in btree_flush_write(), it is unncessary indeed. This patch removes this macro and does calculation directly in place. Signed-off-by: Coly Li <colyli@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk> | 13 February 2020, 15:53:50 UTC |
309cc71 | Coly Li | 13 February 2020, 14:12:06 UTC | bcache: Revert "bcache: shrink btree node cache after bch_btree_check()" This reverts commit 1df3877ff6a4810054237c3259d900ded4468969. In my testing, sometimes even all the cached btree nodes are freed, creating gc and allocator kernel threads may still fail. Finally it turns out that kthread_run() may fail if there is pending signal for current task. And the pending signal is sent from OOM killer which is triggered by memory consuption in bch_btree_check(). Therefore explicitly shrinking bcache btree node here does not help, and after the shrinker callback is improved, as well as pending signals are ignored before creating kernel threads, now such operation is unncessary anymore. This patch reverts the commit 1df3877ff6a4 ("bcache: shrink btree node cache after bch_btree_check()") because we have better improvement now. Signed-off-by: Coly Li <colyli@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk> | 13 February 2020, 15:53:49 UTC |
0b96da6 | Coly Li | 13 February 2020, 14:12:05 UTC | bcache: ignore pending signals when creating gc and allocator thread When run a cache set, all the bcache btree node of this cache set will be checked by bch_btree_check(). If the bcache btree is very large, iterating all the btree nodes will occupy too much system memory and the bcache registering process might be selected and killed by system OOM killer. kthread_run() will fail if current process has pending signal, therefore the kthread creating in run_cache_set() for gc and allocator kernel threads are very probably failed for a very large bcache btree. Indeed such OOM is safe and the registering process will exit after the registration done. Therefore this patch flushes pending signals during the cache set start up, specificly in bch_cache_allocator_start() and bch_gc_thread_start(), to make sure run_cache_set() won't fail for large cahced data set. Signed-off-by: Coly Li <colyli@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk> | 13 February 2020, 15:53:49 UTC |
0fbb027 | Takashi Iwai | 13 February 2020, 06:03:49 UTC | ALSA: pcm: Fix double hw_free calls The commit 66f2d19f8116 ("ALSA: pcm: Fix memory leak at closing a stream without hw_free") tried to fix the regression wrt the missing hw_free call at closing without SNDRV_PCM_IOCTL_HW_FREE ioctl. However, the code change dropped mistakenly the state check, resulting in calling hw_free twice when SNDRV_PCM_IOCTL_HW_FRE got called beforehand. For most drivers, this is almost harmless, but the drivers like SOF show another regression now. This patch adds the state condition check before calling do_hw_free() at releasing the stream for avoiding the double hw_free calls. Fixes: 66f2d19f8116 ("ALSA: pcm: Fix memory leak at closing a stream without hw_free") Reported-by: Bard Liao <yung-chuan.liao@linux.intel.com> Reported-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Tested-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/s5hd0ajyprg.wl-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de> | 13 February 2020, 15:30:22 UTC |
8ac0e66 | Zhu Yanjun | 12 February 2020, 07:26:33 UTC | RDMA/rxe: Fix soft lockup problem due to using tasklets in softirq When run stress tests with RXE, the following Call Traces often occur watchdog: BUG: soft lockup - CPU#2 stuck for 22s! [swapper/2:0] ... Call Trace: <IRQ> create_object+0x3f/0x3b0 kmem_cache_alloc_node_trace+0x129/0x2d0 __kmalloc_reserve.isra.52+0x2e/0x80 __alloc_skb+0x83/0x270 rxe_init_packet+0x99/0x150 [rdma_rxe] rxe_requester+0x34e/0x11a0 [rdma_rxe] rxe_do_task+0x85/0xf0 [rdma_rxe] tasklet_action_common.isra.21+0xeb/0x100 __do_softirq+0xd0/0x298 irq_exit+0xc5/0xd0 smp_apic_timer_interrupt+0x68/0x120 apic_timer_interrupt+0xf/0x20 </IRQ> ... The root cause is that tasklet is actually a softirq. In a tasklet handler, another softirq handler is triggered. Usually these softirq handlers run on the same cpu core. So this will cause "soft lockup Bug". Fixes: 8700e3e7c485 ("Soft RoCE driver") Link: https://lore.kernel.org/r/20200212072635.682689-8-leon@kernel.org Signed-off-by: Zhu Yanjun <yanjunz@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> | 13 February 2020, 14:51:09 UTC |
9b6d3bb | Leon Romanovsky | 12 February 2020, 07:26:35 UTC | RDMA/mlx5: Prevent overflow in mmap offset calculations The cmd and index variables declared as u16 and the result is supposed to be stored in u64. The C arithmetic rules doesn't promote "(index >> 8) << 16" to be u64 and leaves the end result to be u16. Fixes: 7be76bef320b ("IB/mlx5: Introduce VAR object and its alloc/destroy methods") Link: https://lore.kernel.org/r/20200212072635.682689-10-leon@kernel.org Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Reviewed-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> | 13 February 2020, 14:39:23 UTC |
9ea04d0 | Yonatan Cohen | 12 February 2020, 07:26:34 UTC | IB/umad: Fix kernel crash while unloading ib_umad When disassociating a device from umad we must ensure that the sysfs access is prevented before blocking the fops, otherwise assumptions in syfs don't hold: CPU0 CPU1 ib_umad_kill_port() ibdev_show() port->ib_dev = NULL dev_name(port->ib_dev) The prior patch made an error in moving the device_destroy(), it should have been split into device_del() (above) and put_device() (below). At this point we already have the split, so move the device_del() back to its original place. kernel stack PF: error_code(0x0000) - not-present page Oops: 0000 [#1] SMP DEBUG_PAGEALLOC PTI RIP: 0010:ibdev_show+0x18/0x50 [ib_umad] RSP: 0018:ffffc9000097fe40 EFLAGS: 00010282 RAX: 0000000000000000 RBX: ffffffffa0441120 RCX: ffff8881df514000 RDX: ffff8881df514000 RSI: ffffffffa0441120 RDI: ffff8881df1e8870 RBP: ffffffff81caf000 R08: ffff8881df1e8870 R09: 0000000000000000 R10: 0000000000001000 R11: 0000000000000003 R12: ffff88822f550b40 R13: 0000000000000001 R14: ffffc9000097ff08 R15: ffff8882238bad58 FS: 00007f1437ff3740(0000) GS:ffff888236940000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000000004e8 CR3: 00000001e0dfc001 CR4: 00000000001606e0 Call Trace: dev_attr_show+0x15/0x50 sysfs_kf_seq_show+0xb8/0x1a0 seq_read+0x12d/0x350 vfs_read+0x89/0x140 ksys_read+0x55/0xd0 do_syscall_64+0x55/0x1b0 entry_SYSCALL_64_after_hwframe+0x44/0xa9: Fixes: cf7ad3030271 ("IB/umad: Avoid destroying device while it is accessed") Link: https://lore.kernel.org/r/20200212072635.682689-9-leon@kernel.org Signed-off-by: Yonatan Cohen <yonatanc@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Reviewed-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> | 13 February 2020, 14:00:50 UTC |
a8af869 | Yishai Hadas | 12 February 2020, 07:26:32 UTC | RDMA/mlx5: Fix async events cleanup flows As in the prior patch, the devx code is not fully cleaning up its event_lists before finishing driver_destroy allowing a later read to trigger user after free conditions. Re-arrange things so that the event_list is always empty after destroy and ensure it remains empty until the file is closed. Fixes: f7c8416ccea5 ("RDMA/core: Simplify destruction of FD uobjects") Link: https://lore.kernel.org/r/20200212072635.682689-7-leon@kernel.org Signed-off-by: Yishai Hadas <yishaih@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Reviewed-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> | 13 February 2020, 13:48:17 UTC |
a0767da | Michael Guralnik | 12 February 2020, 07:26:31 UTC | RDMA/core: Add missing list deletion on freeing event queue When the uobject file scheme was revised to allow device disassociation from the file it became possible for read() to still happen the driver destroys the uobject. The old clode code was not tolerant to concurrent read, and when it was moved to the driver destroy it creates a bug. Ensure the event_list is empty after driver destroy by adding the missing list_del(). Otherwise read() can trigger a use after free and double kfree. Fixes: f7c8416ccea5 ("RDMA/core: Simplify destruction of FD uobjects") Link: https://lore.kernel.org/r/20200212072635.682689-6-leon@kernel.org Signed-off-by: Michael Guralnik <michaelgur@mellanox.com> Reviewed-by: Yishai Hadas <yishaih@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Reviewed-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> | 13 February 2020, 13:44:49 UTC |
9f35a31 | Alexander Tsoy | 12 February 2020, 23:54:50 UTC | ALSA: usb-audio: Add clock validity quirk for Denon MC7000/MCX8000 It should be safe to ignore clock validity check result if the following conditions are met: - only one single sample rate is supported; - the terminal is directly connected to the clock source; - the clock type is internal. This is to deal with some Denon DJ controllers that always reports that clock is invalid. Tested-by: Tobias Oszlanyi <toszlanyi@yahoo.de> Signed-off-by: Alexander Tsoy <alexander@tsoy.me> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200212235450.697348-1-alexander@tsoy.me Signed-off-by: Takashi Iwai <tiwai@suse.de> | 13 February 2020, 06:18:58 UTC |
f52aa79 | Frank Sorenson | 12 February 2020, 21:31:48 UTC | cifs: Fix mode output in debugging statements A number of the debug statements output file or directory mode in hex. Change these to print using octal. Signed-off-by: Frank Sorenson <sorenson@redhat.com> Signed-off-by: Steve French <stfrench@microsoft.com> | 13 February 2020, 04:24:26 UTC |
7563439 | Jens Axboe | 11 February 2020, 13:30:06 UTC | io-wq: don't call kXalloc_node() with non-online node Glauber reports a crash on init on a box he has: RIP: 0010:__alloc_pages_nodemask+0x132/0x340 Code: 18 01 75 04 41 80 ce 80 89 e8 48 8b 54 24 08 8b 74 24 1c c1 e8 0c 48 8b 3c 24 83 e0 01 88 44 24 20 48 85 d2 0f 85 74 01 00 00 <3b> 77 08 0f 82 6b 01 00 00 48 89 7c 24 10 89 ea 48 8b 07 b9 00 02 RSP: 0018:ffffb8be4d0b7c28 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 000000000000e8e8 RDX: 0000000000000000 RSI: 0000000000000002 RDI: 0000000000002080 RBP: 0000000000012cc0 R08: 0000000000000000 R09: 0000000000000002 R10: 0000000000000dc0 R11: ffff995c60400100 R12: 0000000000000000 R13: 0000000000012cc0 R14: 0000000000000001 R15: ffff995c60db00f0 FS: 00007f4d115ca900(0000) GS:ffff995c60d80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000002088 CR3: 00000017cca66002 CR4: 00000000007606e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: alloc_slab_page+0x46/0x320 new_slab+0x9d/0x4e0 ___slab_alloc+0x507/0x6a0 ? io_wq_create+0xb4/0x2a0 __slab_alloc+0x1c/0x30 kmem_cache_alloc_node_trace+0xa6/0x260 io_wq_create+0xb4/0x2a0 io_uring_setup+0x97f/0xaa0 ? io_remove_personalities+0x30/0x30 ? io_poll_trigger_evfd+0x30/0x30 do_syscall_64+0x5b/0x1c0 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x7f4d116cb1ed which is due to the 'wqe' and 'worker' allocation being node affine. But it isn't valid to call the node affine allocation if the node isn't online. Setup structures for even offline nodes, as usual, but skip them in terms of thread setup to not waste resources. If the node isn't online, just alloc memory with NUMA_NO_NODE. Reported-by: Glauber Costa <glauber@scylladb.com> Tested-by: Glauber Costa <glauber@scylladb.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> | 13 February 2020, 00:43:22 UTC |
205447f | Johan Hovold | 12 February 2020, 09:24:26 UTC | hwmon: (pmbus/xdpe12284) fix typo in compatible strings Make sure that the driver compatible strings matches the binding by removing the space between the manufacturer and model. Fixes: aaafb7c8eb1c ("hwmon: (pmbus) Add support for Infineon Multi-phase xdpe122 family controllers") Cc: Vadim Pasternak <vadimp@mellanox.com> Signed-off-by: Johan Hovold <johan@kernel.org> Link: https://lore.kernel.org/r/20200212092426.24012-1-johan@kernel.org Signed-off-by: Guenter Roeck <linux@roeck-us.net> | 12 February 2020, 20:43:01 UTC |