Revision e30cb13c5a09ff5f043a6570c32e49b063bea6a1 authored by Linus Torvalds on 02 August 2018, 17:12:02 UTC, committed by Linus Torvalds on 02 August 2018, 17:12:02 UTC
Pull networking fixes from David Miller: "Fixes keep trickling in: 1) Various IP fragmentation memory limit hardening changes from Eric Dumazet. 2) Revert ipv6 metrics leak change, it causes more problems than it fixes for now. 3) Fix WoL regression in stmmac driver, from Jose Abreu. 4) Netlink socket spectre v1 gadget fix, from Jeremy Cline" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: Revert "net/ipv6: fix metrics leak" rxrpc: Fix user call ID check in rxrpc_service_prealloc_one net: dsa: Do not suspend/resume closed slave_dev netlink: Fix spectre v1 gadget in netlink_create() Documentation: dpaa2: Use correct heading adornment net: stmmac: Fix WoL for PCI-based setups bonding: avoid lockdep confusion in bond_get_stats() enic: do not call enic_change_mtu in enic_probe ipv4: frags: handle possible skb truesize change inet: frag: enforce memory limits earlier net/mlx5e: IPoIB, Set the netdevice sw mtu in ipoib enhanced flow net/mlx5e: Fix null pointer access when setting MTU of vport representor net/mlx5e: Set port trust mode to PCP as default net/mlx5e: E-Switch, Initialize eswitch only if eswitch manager net: dsa: mv88e6xxx: Fix SERDES support on 88E6141/6341 brcmfmac: fix regression in parsing NVRAM for multiple devices iwlwifi: add more card IDs for 9000 series
Kconfig
# SPDX-License-Identifier: GPL-2.0
#
# General architecture dependent options
#
config CRASH_CORE
bool
config KEXEC_CORE
select CRASH_CORE
bool
config HAVE_IMA_KEXEC
bool
config OPROFILE
tristate "OProfile system profiling"
depends on PROFILING
depends on HAVE_OPROFILE
select RING_BUFFER
select RING_BUFFER_ALLOW_SWAP
help
OProfile is a profiling system capable of profiling the
whole system, include the kernel, kernel modules, libraries,
and applications.
If unsure, say N.
config OPROFILE_EVENT_MULTIPLEX
bool "OProfile multiplexing support (EXPERIMENTAL)"
default n
depends on OPROFILE && X86
help
The number of hardware counters is limited. The multiplexing
feature enables OProfile to gather more events than counters
are provided by the hardware. This is realized by switching
between events at a user specified time interval.
If unsure, say N.
config HAVE_OPROFILE
bool
config OPROFILE_NMI_TIMER
def_bool y
depends on PERF_EVENTS && HAVE_PERF_EVENTS_NMI && !PPC64
config KPROBES
bool "Kprobes"
depends on MODULES
depends on HAVE_KPROBES
select KALLSYMS
help
Kprobes allows you to trap at almost any kernel address and
execute a callback function. register_kprobe() establishes
a probepoint and specifies the callback. Kprobes is useful
for kernel debugging, non-intrusive instrumentation and testing.
If in doubt, say "N".
config JUMP_LABEL
bool "Optimize very unlikely/likely branches"
depends on HAVE_ARCH_JUMP_LABEL
help
This option enables a transparent branch optimization that
makes certain almost-always-true or almost-always-false branch
conditions even cheaper to execute within the kernel.
Certain performance-sensitive kernel code, such as trace points,
scheduler functionality, networking code and KVM have such
branches and include support for this optimization technique.
If it is detected that the compiler has support for "asm goto",
the kernel will compile such branches with just a nop
instruction. When the condition flag is toggled to true, the
nop will be converted to a jump instruction to execute the
conditional block of instructions.
This technique lowers overhead and stress on the branch prediction
of the processor and generally makes the kernel faster. The update
of the condition is slower, but those are always very rare.
( On 32-bit x86, the necessary options added to the compiler
flags may increase the size of the kernel slightly. )
config STATIC_KEYS_SELFTEST
bool "Static key selftest"
depends on JUMP_LABEL
help
Boot time self-test of the branch patching code.
config OPTPROBES
def_bool y
depends on KPROBES && HAVE_OPTPROBES
select TASKS_RCU if PREEMPT
config KPROBES_ON_FTRACE
def_bool y
depends on KPROBES && HAVE_KPROBES_ON_FTRACE
depends on DYNAMIC_FTRACE_WITH_REGS
help
If function tracer is enabled and the arch supports full
passing of pt_regs to function tracing, then kprobes can
optimize on top of function tracing.
config UPROBES
def_bool n
depends on ARCH_SUPPORTS_UPROBES
help
Uprobes is the user-space counterpart to kprobes: they
enable instrumentation applications (such as 'perf probe')
to establish unintrusive probes in user-space binaries and
libraries, by executing handler functions when the probes
are hit by user-space applications.
( These probes come in the form of single-byte breakpoints,
managed by the kernel and kept transparent to the probed
application. )
config HAVE_64BIT_ALIGNED_ACCESS
def_bool 64BIT && !HAVE_EFFICIENT_UNALIGNED_ACCESS
help
Some architectures require 64 bit accesses to be 64 bit
aligned, which also requires structs containing 64 bit values
to be 64 bit aligned too. This includes some 32 bit
architectures which can do 64 bit accesses, as well as 64 bit
architectures without unaligned access.
This symbol should be selected by an architecture if 64 bit
accesses are required to be 64 bit aligned in this way even
though it is not a 64 bit architecture.
See Documentation/unaligned-memory-access.txt for more
information on the topic of unaligned memory accesses.
config HAVE_EFFICIENT_UNALIGNED_ACCESS
bool
help
Some architectures are unable to perform unaligned accesses
without the use of get_unaligned/put_unaligned. Others are
unable to perform such accesses efficiently (e.g. trap on
unaligned access and require fixing it up in the exception
handler.)
This symbol should be selected by an architecture if it can
perform unaligned accesses efficiently to allow different
code paths to be selected for these cases. Some network
drivers, for example, could opt to not fix up alignment
problems with received packets if doing so would not help
much.
See Documentation/unaligned-memory-access.txt for more
information on the topic of unaligned memory accesses.
config ARCH_USE_BUILTIN_BSWAP
bool
help
Modern versions of GCC (since 4.4) have builtin functions
for handling byte-swapping. Using these, instead of the old
inline assembler that the architecture code provides in the
__arch_bswapXX() macros, allows the compiler to see what's
happening and offers more opportunity for optimisation. In
particular, the compiler will be able to combine the byteswap
with a nearby load or store and use load-and-swap or
store-and-swap instructions if the architecture has them. It
should almost *never* result in code which is worse than the
hand-coded assembler in <asm/swab.h>. But just in case it
does, the use of the builtins is optional.
Any architecture with load-and-swap or store-and-swap
instructions should set this. And it shouldn't hurt to set it
on architectures that don't have such instructions.
config KRETPROBES
def_bool y
depends on KPROBES && HAVE_KRETPROBES
config USER_RETURN_NOTIFIER
bool
depends on HAVE_USER_RETURN_NOTIFIER
help
Provide a kernel-internal notification when a cpu is about to
switch to user mode.
config HAVE_IOREMAP_PROT
bool
config HAVE_KPROBES
bool
config HAVE_KRETPROBES
bool
config HAVE_OPTPROBES
bool
config HAVE_KPROBES_ON_FTRACE
bool
config HAVE_FUNCTION_ERROR_INJECTION
bool
config HAVE_NMI
bool
#
# An arch should select this if it provides all these things:
#
# task_pt_regs() in asm/processor.h or asm/ptrace.h
# arch_has_single_step() if there is hardware single-step support
# arch_has_block_step() if there is hardware block-step support
# asm/syscall.h supplying asm-generic/syscall.h interface
# linux/regset.h user_regset interfaces
# CORE_DUMP_USE_REGSET #define'd in linux/elf.h
# TIF_SYSCALL_TRACE calls tracehook_report_syscall_{entry,exit}
# TIF_NOTIFY_RESUME calls tracehook_notify_resume()
# signal delivery calls tracehook_signal_handler()
#
config HAVE_ARCH_TRACEHOOK
bool
config HAVE_DMA_CONTIGUOUS
bool
config GENERIC_SMP_IDLE_THREAD
bool
config GENERIC_IDLE_POLL_SETUP
bool
config ARCH_HAS_FORTIFY_SOURCE
bool
help
An architecture should select this when it can successfully
build and run with CONFIG_FORTIFY_SOURCE.
# Select if arch has all set_memory_ro/rw/x/nx() functions in asm/cacheflush.h
config ARCH_HAS_SET_MEMORY
bool
# Select if arch init_task must go in the __init_task_data section
config ARCH_TASK_STRUCT_ON_STACK
bool
# Select if arch has its private alloc_task_struct() function
config ARCH_TASK_STRUCT_ALLOCATOR
bool
config HAVE_ARCH_THREAD_STRUCT_WHITELIST
bool
depends on !ARCH_TASK_STRUCT_ALLOCATOR
help
An architecture should select this to provide hardened usercopy
knowledge about what region of the thread_struct should be
whitelisted for copying to userspace. Normally this is only the
FPU registers. Specifically, arch_thread_struct_whitelist()
should be implemented. Without this, the entire thread_struct
field in task_struct will be left whitelisted.
# Select if arch has its private alloc_thread_stack() function
config ARCH_THREAD_STACK_ALLOCATOR
bool
# Select if arch wants to size task_struct dynamically via arch_task_struct_size:
config ARCH_WANTS_DYNAMIC_TASK_STRUCT
bool
config HAVE_REGS_AND_STACK_ACCESS_API
bool
help
This symbol should be selected by an architecure if it supports
the API needed to access registers and stack entries from pt_regs,
declared in asm/ptrace.h
For example the kprobes-based event tracer needs this API.
config HAVE_RSEQ
bool
depends on HAVE_REGS_AND_STACK_ACCESS_API
help
This symbol should be selected by an architecture if it
supports an implementation of restartable sequences.
config HAVE_CLK
bool
help
The <linux/clk.h> calls support software clock gating and
thus are a key power management tool on many systems.
config HAVE_HW_BREAKPOINT
bool
depends on PERF_EVENTS
config HAVE_MIXED_BREAKPOINTS_REGS
bool
depends on HAVE_HW_BREAKPOINT
help
Depending on the arch implementation of hardware breakpoints,
some of them have separate registers for data and instruction
breakpoints addresses, others have mixed registers to store
them but define the access type in a control register.
Select this option if your arch implements breakpoints under the
latter fashion.
config HAVE_USER_RETURN_NOTIFIER
bool
config HAVE_PERF_EVENTS_NMI
bool
help
System hardware can generate an NMI using the perf event
subsystem. Also has support for calculating CPU cycle events
to determine how many clock cycles in a given period.
config HAVE_HARDLOCKUP_DETECTOR_PERF
bool
depends on HAVE_PERF_EVENTS_NMI
help
The arch chooses to use the generic perf-NMI-based hardlockup
detector. Must define HAVE_PERF_EVENTS_NMI.
config HAVE_NMI_WATCHDOG
depends on HAVE_NMI
bool
help
The arch provides a low level NMI watchdog. It provides
asm/nmi.h, and defines its own arch_touch_nmi_watchdog().
config HAVE_HARDLOCKUP_DETECTOR_ARCH
bool
select HAVE_NMI_WATCHDOG
help
The arch chooses to provide its own hardlockup detector, which is
a superset of the HAVE_NMI_WATCHDOG. It also conforms to config
interfaces and parameters provided by hardlockup detector subsystem.
config HAVE_PERF_REGS
bool
help
Support selective register dumps for perf events. This includes
bit-mapping of each registers and a unique architecture id.
config HAVE_PERF_USER_STACK_DUMP
bool
help
Support user stack dumps for perf event samples. This needs
access to the user stack pointer which is not unified across
architectures.
config HAVE_ARCH_JUMP_LABEL
bool
config HAVE_RCU_TABLE_FREE
bool
config ARCH_HAVE_NMI_SAFE_CMPXCHG
bool
config HAVE_ALIGNED_STRUCT_PAGE
bool
help
This makes sure that struct pages are double word aligned and that
e.g. the SLUB allocator can perform double word atomic operations
on a struct page for better performance. However selecting this
might increase the size of a struct page by a word.
config HAVE_CMPXCHG_LOCAL
bool
config HAVE_CMPXCHG_DOUBLE
bool
config ARCH_WEAK_RELEASE_ACQUIRE
bool
config ARCH_WANT_IPC_PARSE_VERSION
bool
config ARCH_WANT_COMPAT_IPC_PARSE_VERSION
bool
config ARCH_WANT_OLD_COMPAT_IPC
select ARCH_WANT_COMPAT_IPC_PARSE_VERSION
bool
config HAVE_ARCH_SECCOMP_FILTER
bool
help
An arch should select this symbol if it provides all of these things:
- syscall_get_arch()
- syscall_get_arguments()
- syscall_rollback()
- syscall_set_return_value()
- SIGSYS siginfo_t support
- secure_computing is called from a ptrace_event()-safe context
- secure_computing return value is checked and a return value of -1
results in the system call being skipped immediately.
- seccomp syscall wired up
config SECCOMP_FILTER
def_bool y
depends on HAVE_ARCH_SECCOMP_FILTER && SECCOMP && NET
help
Enable tasks to build secure computing environments defined
in terms of Berkeley Packet Filter programs which implement
task-defined system call filtering polices.
See Documentation/userspace-api/seccomp_filter.rst for details.
preferred-plugin-hostcc := $(if-success,[ $(gcc-version) -ge 40800 ],$(HOSTCXX),$(HOSTCC))
config PLUGIN_HOSTCC
string
default "$(shell,$(srctree)/scripts/gcc-plugin.sh "$(preferred-plugin-hostcc)" "$(HOSTCXX)" "$(CC)")"
help
Host compiler used to build GCC plugins. This can be $(HOSTCXX),
$(HOSTCC), or a null string if GCC plugin is unsupported.
config HAVE_GCC_PLUGINS
bool
help
An arch should select this symbol if it supports building with
GCC plugins.
menuconfig GCC_PLUGINS
bool "GCC plugins"
depends on HAVE_GCC_PLUGINS
depends on PLUGIN_HOSTCC != ""
help
GCC plugins are loadable modules that provide extra features to the
compiler. They are useful for runtime instrumentation and static analysis.
See Documentation/gcc-plugins.txt for details.
config GCC_PLUGIN_CYC_COMPLEXITY
bool "Compute the cyclomatic complexity of a function" if EXPERT
depends on GCC_PLUGINS
depends on !COMPILE_TEST # too noisy
help
The complexity M of a function's control flow graph is defined as:
M = E - N + 2P
where
E = the number of edges
N = the number of nodes
P = the number of connected components (exit nodes).
Enabling this plugin reports the complexity to stderr during the
build. It mainly serves as a simple example of how to create a
gcc plugin for the kernel.
config GCC_PLUGIN_SANCOV
bool
depends on GCC_PLUGINS
help
This plugin inserts a __sanitizer_cov_trace_pc() call at the start of
basic blocks. It supports all gcc versions with plugin support (from
gcc-4.5 on). It is based on the commit "Add fuzzing coverage support"
by Dmitry Vyukov <dvyukov@google.com>.
config GCC_PLUGIN_LATENT_ENTROPY
bool "Generate some entropy during boot and runtime"
depends on GCC_PLUGINS
help
By saying Y here the kernel will instrument some kernel code to
extract some entropy from both original and artificially created
program state. This will help especially embedded systems where
there is little 'natural' source of entropy normally. The cost
is some slowdown of the boot process (about 0.5%) and fork and
irq processing.
Note that entropy extracted this way is not cryptographically
secure!
This plugin was ported from grsecurity/PaX. More information at:
* https://grsecurity.net/
* https://pax.grsecurity.net/
config GCC_PLUGIN_STRUCTLEAK
bool "Force initialization of variables containing userspace addresses"
depends on GCC_PLUGINS
# Currently STRUCTLEAK inserts initialization out of live scope of
# variables from KASAN point of view. This leads to KASAN false
# positive reports. Prohibit this combination for now.
depends on !KASAN_EXTRA
help
This plugin zero-initializes any structures containing a
__user attribute. This can prevent some classes of information
exposures.
This plugin was ported from grsecurity/PaX. More information at:
* https://grsecurity.net/
* https://pax.grsecurity.net/
config GCC_PLUGIN_STRUCTLEAK_BYREF_ALL
bool "Force initialize all struct type variables passed by reference"
depends on GCC_PLUGIN_STRUCTLEAK
depends on !COMPILE_TEST
help
Zero initialize any struct type local variable that may be passed by
reference without having been initialized.
config GCC_PLUGIN_STRUCTLEAK_VERBOSE
bool "Report forcefully initialized variables"
depends on GCC_PLUGIN_STRUCTLEAK
depends on !COMPILE_TEST # too noisy
help
This option will cause a warning to be printed each time the
structleak plugin finds a variable it thinks needs to be
initialized. Since not all existing initializers are detected
by the plugin, this can produce false positive warnings.
config GCC_PLUGIN_RANDSTRUCT
bool "Randomize layout of sensitive kernel structures"
depends on GCC_PLUGINS
select MODVERSIONS if MODULES
help
If you say Y here, the layouts of structures that are entirely
function pointers (and have not been manually annotated with
__no_randomize_layout), or structures that have been explicitly
marked with __randomize_layout, will be randomized at compile-time.
This can introduce the requirement of an additional information
exposure vulnerability for exploits targeting these structure
types.
Enabling this feature will introduce some performance impact,
slightly increase memory usage, and prevent the use of forensic
tools like Volatility against the system (unless the kernel
source tree isn't cleaned after kernel installation).
The seed used for compilation is located at
scripts/gcc-plgins/randomize_layout_seed.h. It remains after
a make clean to allow for external modules to be compiled with
the existing seed and will be removed by a make mrproper or
make distclean.
Note that the implementation requires gcc 4.7 or newer.
This plugin was ported from grsecurity/PaX. More information at:
* https://grsecurity.net/
* https://pax.grsecurity.net/
config GCC_PLUGIN_RANDSTRUCT_PERFORMANCE
bool "Use cacheline-aware structure randomization"
depends on GCC_PLUGIN_RANDSTRUCT
depends on !COMPILE_TEST # do not reduce test coverage
help
If you say Y here, the RANDSTRUCT randomization will make a
best effort at restricting randomization to cacheline-sized
groups of elements. It will further not randomize bitfields
in structures. This reduces the performance hit of RANDSTRUCT
at the cost of weakened randomization.
config HAVE_STACKPROTECTOR
bool
help
An arch should select this symbol if:
- it has implemented a stack canary (e.g. __stack_chk_guard)
config CC_HAS_STACKPROTECTOR_NONE
def_bool $(cc-option,-fno-stack-protector)
config STACKPROTECTOR
bool "Stack Protector buffer overflow detection"
depends on HAVE_STACKPROTECTOR
depends on $(cc-option,-fstack-protector)
default y
help
This option turns on the "stack-protector" GCC feature. This
feature puts, at the beginning of functions, a canary value on
the stack just before the return address, and validates
the value just before actually returning. Stack based buffer
overflows (that need to overwrite this return address) now also
overwrite the canary, which gets detected and the attack is then
neutralized via a kernel panic.
Functions will have the stack-protector canary logic added if they
have an 8-byte or larger character array on the stack.
This feature requires gcc version 4.2 or above, or a distribution
gcc with the feature backported ("-fstack-protector").
On an x86 "defconfig" build, this feature adds canary checks to
about 3% of all kernel functions, which increases kernel code size
by about 0.3%.
config STACKPROTECTOR_STRONG
bool "Strong Stack Protector"
depends on STACKPROTECTOR
depends on $(cc-option,-fstack-protector-strong)
default y
help
Functions will have the stack-protector canary logic added in any
of the following conditions:
- local variable's address used as part of the right hand side of an
assignment or function argument
- local variable is an array (or union containing an array),
regardless of array type or length
- uses register local variables
This feature requires gcc version 4.9 or above, or a distribution
gcc with the feature backported ("-fstack-protector-strong").
On an x86 "defconfig" build, this feature adds canary checks to
about 20% of all kernel functions, which increases the kernel code
size by about 2%.
config HAVE_ARCH_WITHIN_STACK_FRAMES
bool
help
An architecture should select this if it can walk the kernel stack
frames to determine if an object is part of either the arguments
or local variables (i.e. that it excludes saved return addresses,
and similar) by implementing an inline arch_within_stack_frames(),
which is used by CONFIG_HARDENED_USERCOPY.
config HAVE_CONTEXT_TRACKING
bool
help
Provide kernel/user boundaries probes necessary for subsystems
that need it, such as userspace RCU extended quiescent state.
Syscalls need to be wrapped inside user_exit()-user_enter() through
the slow path using TIF_NOHZ flag. Exceptions handlers must be
wrapped as well. Irqs are already protected inside
rcu_irq_enter/rcu_irq_exit() but preemption or signal handling on
irq exit still need to be protected.
config HAVE_VIRT_CPU_ACCOUNTING
bool
config ARCH_HAS_SCALED_CPUTIME
bool
config HAVE_VIRT_CPU_ACCOUNTING_GEN
bool
default y if 64BIT
help
With VIRT_CPU_ACCOUNTING_GEN, cputime_t becomes 64-bit.
Before enabling this option, arch code must be audited
to ensure there are no races in concurrent read/write of
cputime_t. For example, reading/writing 64-bit cputime_t on
some 32-bit arches may require multiple accesses, so proper
locking is needed to protect against concurrent accesses.
config HAVE_IRQ_TIME_ACCOUNTING
bool
help
Archs need to ensure they use a high enough resolution clock to
support irq time accounting and then call enable_sched_clock_irqtime().
config HAVE_ARCH_TRANSPARENT_HUGEPAGE
bool
config HAVE_ARCH_TRANSPARENT_HUGEPAGE_PUD
bool
config HAVE_ARCH_HUGE_VMAP
bool
config HAVE_ARCH_SOFT_DIRTY
bool
config HAVE_MOD_ARCH_SPECIFIC
bool
help
The arch uses struct mod_arch_specific to store data. Many arches
just need a simple module loader without arch specific data - those
should not enable this.
config MODULES_USE_ELF_RELA
bool
help
Modules only use ELF RELA relocations. Modules with ELF REL
relocations will give an error.
config MODULES_USE_ELF_REL
bool
help
Modules only use ELF REL relocations. Modules with ELF RELA
relocations will give an error.
config HAVE_IRQ_EXIT_ON_IRQ_STACK
bool
help
Architecture doesn't only execute the irq handler on the irq stack
but also irq_exit(). This way we can process softirqs on this irq
stack instead of switching to a new one when we call __do_softirq()
in the end of an hardirq.
This spares a stack switch and improves cache usage on softirq
processing.
config PGTABLE_LEVELS
int
default 2
config ARCH_HAS_ELF_RANDOMIZE
bool
help
An architecture supports choosing randomized locations for
stack, mmap, brk, and ET_DYN. Defined functions:
- arch_mmap_rnd()
- arch_randomize_brk()
config HAVE_ARCH_MMAP_RND_BITS
bool
help
An arch should select this symbol if it supports setting a variable
number of bits for use in establishing the base address for mmap
allocations, has MMU enabled and provides values for both:
- ARCH_MMAP_RND_BITS_MIN
- ARCH_MMAP_RND_BITS_MAX
config HAVE_EXIT_THREAD
bool
help
An architecture implements exit_thread.
config ARCH_MMAP_RND_BITS_MIN
int
config ARCH_MMAP_RND_BITS_MAX
int
config ARCH_MMAP_RND_BITS_DEFAULT
int
config ARCH_MMAP_RND_BITS
int "Number of bits to use for ASLR of mmap base address" if EXPERT
range ARCH_MMAP_RND_BITS_MIN ARCH_MMAP_RND_BITS_MAX
default ARCH_MMAP_RND_BITS_DEFAULT if ARCH_MMAP_RND_BITS_DEFAULT
default ARCH_MMAP_RND_BITS_MIN
depends on HAVE_ARCH_MMAP_RND_BITS
help
This value can be used to select the number of bits to use to
determine the random offset to the base address of vma regions
resulting from mmap allocations. This value will be bounded
by the architecture's minimum and maximum supported values.
This value can be changed after boot using the
/proc/sys/vm/mmap_rnd_bits tunable
config HAVE_ARCH_MMAP_RND_COMPAT_BITS
bool
help
An arch should select this symbol if it supports running applications
in compatibility mode, supports setting a variable number of bits for
use in establishing the base address for mmap allocations, has MMU
enabled and provides values for both:
- ARCH_MMAP_RND_COMPAT_BITS_MIN
- ARCH_MMAP_RND_COMPAT_BITS_MAX
config ARCH_MMAP_RND_COMPAT_BITS_MIN
int
config ARCH_MMAP_RND_COMPAT_BITS_MAX
int
config ARCH_MMAP_RND_COMPAT_BITS_DEFAULT
int
config ARCH_MMAP_RND_COMPAT_BITS
int "Number of bits to use for ASLR of mmap base address for compatible applications" if EXPERT
range ARCH_MMAP_RND_COMPAT_BITS_MIN ARCH_MMAP_RND_COMPAT_BITS_MAX
default ARCH_MMAP_RND_COMPAT_BITS_DEFAULT if ARCH_MMAP_RND_COMPAT_BITS_DEFAULT
default ARCH_MMAP_RND_COMPAT_BITS_MIN
depends on HAVE_ARCH_MMAP_RND_COMPAT_BITS
help
This value can be used to select the number of bits to use to
determine the random offset to the base address of vma regions
resulting from mmap allocations for compatible applications This
value will be bounded by the architecture's minimum and maximum
supported values.
This value can be changed after boot using the
/proc/sys/vm/mmap_rnd_compat_bits tunable
config HAVE_ARCH_COMPAT_MMAP_BASES
bool
help
This allows 64bit applications to invoke 32-bit mmap() syscall
and vice-versa 32-bit applications to call 64-bit mmap().
Required for applications doing different bitness syscalls.
config HAVE_COPY_THREAD_TLS
bool
help
Architecture provides copy_thread_tls to accept tls argument via
normal C parameter passing, rather than extracting the syscall
argument from pt_regs.
config HAVE_STACK_VALIDATION
bool
help
Architecture supports the 'objtool check' host tool command, which
performs compile-time stack metadata validation.
config HAVE_RELIABLE_STACKTRACE
bool
help
Architecture has a save_stack_trace_tsk_reliable() function which
only returns a stack trace if it can guarantee the trace is reliable.
config HAVE_ARCH_HASH
bool
default n
help
If this is set, the architecture provides an <asm/hash.h>
file which provides platform-specific implementations of some
functions in <linux/hash.h> or fs/namei.c.
config ISA_BUS_API
def_bool ISA
#
# ABI hall of shame
#
config CLONE_BACKWARDS
bool
help
Architecture has tls passed as the 4th argument of clone(2),
not the 5th one.
config CLONE_BACKWARDS2
bool
help
Architecture has the first two arguments of clone(2) swapped.
config CLONE_BACKWARDS3
bool
help
Architecture has tls passed as the 3rd argument of clone(2),
not the 5th one.
config ODD_RT_SIGACTION
bool
help
Architecture has unusual rt_sigaction(2) arguments
config OLD_SIGSUSPEND
bool
help
Architecture has old sigsuspend(2) syscall, of one-argument variety
config OLD_SIGSUSPEND3
bool
help
Even weirder antique ABI - three-argument sigsuspend(2)
config OLD_SIGACTION
bool
help
Architecture has old sigaction(2) syscall. Nope, not the same
as OLD_SIGSUSPEND | OLD_SIGSUSPEND3 - alpha has sigsuspend(2),
but fairly different variant of sigaction(2), thanks to OSF/1
compatibility...
config COMPAT_OLD_SIGACTION
bool
config 64BIT_TIME
def_bool ARCH_HAS_64BIT_TIME
help
This should be selected by all architectures that need to support
new system calls with a 64-bit time_t. This is relevant on all 32-bit
architectures, and 64-bit architectures as part of compat syscall
handling.
config COMPAT_32BIT_TIME
def_bool (!64BIT && 64BIT_TIME) || COMPAT
help
This enables 32 bit time_t support in addition to 64 bit time_t support.
This is relevant on all 32-bit architectures, and 64-bit architectures
as part of compat syscall handling.
config ARCH_NO_COHERENT_DMA_MMAP
bool
config CPU_NO_EFFICIENT_FFS
def_bool n
config HAVE_ARCH_VMAP_STACK
def_bool n
help
An arch should select this symbol if it can support kernel stacks
in vmalloc space. This means:
- vmalloc space must be large enough to hold many kernel stacks.
This may rule out many 32-bit architectures.
- Stacks in vmalloc space need to work reliably. For example, if
vmap page tables are created on demand, either this mechanism
needs to work while the stack points to a virtual address with
unpopulated page tables or arch code (switch_to() and switch_mm(),
most likely) needs to ensure that the stack's page table entries
are populated before running on a possibly unpopulated stack.
- If the stack overflows into a guard page, something reasonable
should happen. The definition of "reasonable" is flexible, but
instantly rebooting without logging anything would be unfriendly.
config VMAP_STACK
default y
bool "Use a virtually-mapped stack"
depends on HAVE_ARCH_VMAP_STACK && !KASAN
---help---
Enable this if you want the use virtually-mapped kernel stacks
with guard pages. This causes kernel stack overflows to be
caught immediately rather than causing difficult-to-diagnose
corruption.
This is presently incompatible with KASAN because KASAN expects
the stack to map directly to the KASAN shadow map using a formula
that is incorrect if the stack is in vmalloc space.
config ARCH_OPTIONAL_KERNEL_RWX
def_bool n
config ARCH_OPTIONAL_KERNEL_RWX_DEFAULT
def_bool n
config ARCH_HAS_STRICT_KERNEL_RWX
def_bool n
config STRICT_KERNEL_RWX
bool "Make kernel text and rodata read-only" if ARCH_OPTIONAL_KERNEL_RWX
depends on ARCH_HAS_STRICT_KERNEL_RWX
default !ARCH_OPTIONAL_KERNEL_RWX || ARCH_OPTIONAL_KERNEL_RWX_DEFAULT
help
If this is set, kernel text and rodata memory will be made read-only,
and non-text memory will be made non-executable. This provides
protection against certain security exploits (e.g. executing the heap
or modifying text)
These features are considered standard security practice these days.
You should say Y here in almost all cases.
config ARCH_HAS_STRICT_MODULE_RWX
def_bool n
config STRICT_MODULE_RWX
bool "Set loadable kernel module data as NX and text as RO" if ARCH_OPTIONAL_KERNEL_RWX
depends on ARCH_HAS_STRICT_MODULE_RWX && MODULES
default !ARCH_OPTIONAL_KERNEL_RWX || ARCH_OPTIONAL_KERNEL_RWX_DEFAULT
help
If this is set, module text and rodata memory will be made read-only,
and non-text memory will be made non-executable. This provides
protection against certain security exploits (e.g. writing to text)
# select if the architecture provides an asm/dma-direct.h header
config ARCH_HAS_PHYS_TO_DMA
bool
config ARCH_HAS_REFCOUNT
bool
help
An architecture selects this when it has implemented refcount_t
using open coded assembly primitives that provide an optimized
refcount_t implementation, possibly at the expense of some full
refcount state checks of CONFIG_REFCOUNT_FULL=y.
The refcount overflow check behavior, however, must be retained.
Catching overflows is the primary security concern for protecting
against bugs in reference counts.
config REFCOUNT_FULL
bool "Perform full reference count validation at the expense of speed"
help
Enabling this switches the refcounting infrastructure from a fast
unchecked atomic_t implementation to a fully state checked
implementation, which can be (slightly) slower but provides protections
against various use-after-free conditions that can be used in
security flaw exploits.
source "kernel/gcov/Kconfig"
![swh spinner](/static/img/swh-spinner.gif)
Computing file changes ...