Skip to main content

Browse the archive

Revision e429e26ea4276d5221858c1b43e98d3854f75cbc authored by Eh Tan on 27 September 2007, 19:33:57 UTC, committed by Eh Tan on 27 September 2007, 19:33:57 UTC 
Added function prototype and fixed a few errors
1 parent a79e4a9
Raw File
README 
  * To convert pseudo-free-surface B.C. to free-slip B.C., do the following:
      1) --solver.bc.topvbc=2 --> --solver.bc.topvbc=0
      2) --solver.bc.pseudo_free_surf=on --> --solver.bc.pseudo_free_surf=off

  * To try a different hot blob, one can specify three parameters:
    1. solver.ic.blob_center: Coordinates(theta,fi,r) of the center.
    2. solver.ic.blob_radius: Radius as non-dimensional distance.
    3. solver.ic.blob_dT:     The amount of temperature increase/decrease 
	                          within the blob as non-dimensional temperature.
	
    Note: It is required to keep "solver.ic.tic_method=2" to have the initial hot blob.
back to top