| e43b3ce | H. Peter Anvin | 14 January 2013, 04:56:41 UTC | x86/Sandy Bridge: Sandy Bridge workaround depends on CONFIG_PCI early_pci_allowed() and read_pci_config_16() are only available if CONFIG_PCI is defined. Signed-off-by: H. Peter Anvin <hpa@linux.intel.com> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> | 14 January 2013, 04:58:57 UTC |
| ab3cd86 | H. Peter Anvin | 14 January 2013, 04:36:39 UTC | x86/Sandy Bridge: mark arrays in __init functions as __initconst Mark static arrays as __initconst so they get removed when the init sections are flushed. Reported-by: Mathias Krause <minipli@googlemail.com> Link: http://lkml.kernel.org/r/75F4BEE6-CB0E-4426-B40B-697451677738@googlemail.com Signed-off-by: H. Peter Anvin <hpa@linux.intel.com> | 14 January 2013, 04:36:39 UTC |
| a9acc53 | Jesse Barnes | 14 November 2012, 20:43:31 UTC | x86/Sandy Bridge: reserve pages when integrated graphics is present SNB graphics devices have a bug that prevent them from accessing certain memory ranges, namely anything below 1M and in the pages listed in the table. So reserve those at boot if set detect a SNB gfx device on the CPU to avoid GPU hangs. Stephane Marchesin had a similar patch to the page allocator awhile back, but rather than reserving pages up front, it leaked them at allocation time. [ hpa: made a number of stylistic changes, marked arrays as static const, and made less verbose; use "memblock=debug" for full verbosity. ] Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com> | 11 January 2013, 22:26:38 UTC |
| 886d751 | Sasha Levin | 20 December 2012, 19:11:33 UTC | x86, efi: correct precedence of operators in setup_efi_pci With the current code, the condition in the if() doesn't make much sense due to precedence of operators. Signed-off-by: Sasha Levin <sasha.levin@oracle.com> Link: http://lkml.kernel.org/r/1356030701-16284-25-git-send-email-sasha.levin@oracle.com Cc: Matt Fleming <matt.fleming@intel.com> Cc: Matthew Garrett <mjg@redhat.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Seth Forshee <seth.forshee@canonical.com> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com> | 20 December 2012, 19:47:14 UTC |
| 787314c | Linus Torvalds | 20 December 2012, 18:07:25 UTC | Merge tag 'iommu-updates-v3.8' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu Pull IOMMU updates from Joerg Roedel: "A few new features this merge-window. The most important one is probably, that dma-debug now warns if a dma-handle is not checked with dma_mapping_error by the device driver. This requires minor changes to some architectures which make use of dma-debug. Most of these changes have the respective Acks by the Arch-Maintainers. Besides that there are updates to the AMD IOMMU driver for refactor the IOMMU-Groups support and to make sure it does not trigger a hardware erratum. The OMAP changes (for which I pulled in a branch from Tony Lindgren's tree) have a conflict in linux-next with the arm-soc tree. The conflict is in the file arch/arm/mach-omap2/clock44xx_data.c which is deleted in the arm-soc tree. It is safe to delete the file too so solve the conflict. Similar changes are done in the arm-soc tree in the common clock framework migration. A missing hunk from the patch in the IOMMU tree will be submitted as a seperate patch when the merge-window is closed." * tag 'iommu-updates-v3.8' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (29 commits) ARM: dma-mapping: support debug_dma_mapping_error ARM: OMAP4: hwmod data: ipu and dsp to use parent clocks instead of leaf clocks iommu/omap: Adapt to runtime pm iommu/omap: Migrate to hwmod framework iommu/omap: Keep mmu enabled when requested iommu/omap: Remove redundant clock handling on ISR iommu/amd: Remove obsolete comment iommu/amd: Don't use 512GB pages iommu/tegra: smmu: Move bus_set_iommu after probe for multi arch iommu/tegra: gart: Move bus_set_iommu after probe for multi arch iommu/tegra: smmu: Remove unnecessary PTC/TLB flush all tile: dma_debug: add debug_dma_mapping_error support sh: dma_debug: add debug_dma_mapping_error support powerpc: dma_debug: add debug_dma_mapping_error support mips: dma_debug: add debug_dma_mapping_error support microblaze: dma-mapping: support debug_dma_mapping_error ia64: dma_debug: add debug_dma_mapping_error support c6x: dma_debug: add debug_dma_mapping_error support ARM64: dma_debug: add debug_dma_mapping_error support intel-iommu: Prevent devices with RMRRs from being placed into SI Domain ... | 20 December 2012, 18:07:25 UTC |
| 6491d4d | Woodhouse, David | 19 December 2012, 13:25:35 UTC | intel-iommu: Free old page tables before creating superpage The dma_pte_free_pagetable() function will only free a page table page if it is asked to free the *entire* 2MiB range that it covers. So if a page table page was used for one or more small mappings, it's likely to end up still present in the page tables... but with no valid PTEs. This was fine when we'd only be repopulating it with 4KiB PTEs anyway but the same virtual address range can end up being reused for a *large-page* mapping. And in that case were were trying to insert the large page into the second-level page table, and getting a complaint from the sanity check in __domain_mapping() because there was already a corresponding entry. This was *relatively* harmless; it led to a memory leak of the old page table page, but no other ill-effects. Fix it by calling dma_pte_clear_range (hopefully redundant) and dma_pte_free_pagetable() before setting up the new large page. Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> Tested-by: Ravi Murty <Ravi.Murty@intel.com> Tested-by: Sudeep Dutt <sudeep.dutt@intel.com> Cc: stable@kernel.org [3.0+] Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 20 December 2012, 18:06:04 UTC |
| 1800098 | Vaibhav Bedia | 19 December 2012, 06:53:10 UTC | ARM: OMAP: Fix build breakage due to missing include in i2c.c Merge commit 752451f01c45 ("Merge branch 'i2c-embedded/for-next' of git://git.pengutronix.de/git/wsa/linux") resulted in a build breakage for OMAP arch/arm/mach-omap2/i2c.c: In function 'omap_pm_set_max_mpu_wakeup_lat_compat': arch/arm/mach-omap2/i2c.c:130:2: error: implicit declaration of function 'omap_pm_set_max_mpu_wakeup_lat' make[1]: *** [arch/arm/mach-omap2/i2c.o] Error 1 Fix this by including the appropriate header file with the function prototype. Reported-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Vaibhav Bedia <vaibhav.bedia@ti.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 20 December 2012, 16:43:25 UTC |
| b7dfde9 | Linus Torvalds | 20 December 2012, 16:37:04 UTC | Merge tag 'virtio-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux Pull virtio update from Rusty Russell: "Some nice cleanups, and even a patch my wife did as a "live" demo for Latinoware 2012. There's a slightly non-trivial merge in virtio-net, as we cleaned up the virtio add_buf interface while DaveM accepted the mq virtio-net patches." * tag 'virtio-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux: (27 commits) virtio_console: Add support for remoteproc serial virtio_console: Merge struct buffer_token into struct port_buffer virtio: add drv_to_virtio to make code clearly virtio: use dev_to_virtio wrapper in virtio virtio-mmio: Fix irq parsing in command line parameter virtio_console: Free buffers from out-queue upon close virtio: Convert dev_printk(KERN_<LEVEL> to dev_<level>( virtio_console: Use kmalloc instead of kzalloc virtio_console: Free buffer if splice fails virtio: tools: make it clear that virtqueue_add_buf() no longer returns > 0 virtio: scsi: make it clear that virtqueue_add_buf() no longer returns > 0 virtio: rpmsg: make it clear that virtqueue_add_buf() no longer returns > 0 virtio: net: make it clear that virtqueue_add_buf() no longer returns > 0 virtio: console: make it clear that virtqueue_add_buf() no longer returns > 0 virtio: make virtqueue_add_buf() returning 0 on success, not capacity. virtio: console: don't rely on virtqueue_add_buf() returning capacity. virtio_net: don't rely on virtqueue_add_buf() returning capacity. virtio-net: remove unused skb_vnet_hdr->num_sg field virtio-net: correct capacity math on ring full virtio: move queue_index and num_free fields into core struct virtqueue. ... | 20 December 2012, 16:37:05 UTC |
| 03c850e | Linus Torvalds | 20 December 2012, 15:52:13 UTC | Merge tag 'sound-3.8' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "This update contains overall only driver-specific fixes. Slightly large LOC are seen in usb-audio driver for a couple of new device quirks and cs42l71 ASoC driver for enhanced features. The others are a few small (regression) fixes HD-audio, and yet other small / trival ASoC fixes." * tag 'sound-3.8' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: usb-audio: Support for Digidesign Mbox 2 USB sound card: ALSA: HDA: Fix sound resume hang ALSA: hda - bug fix for invalid connection list of Haswell HDMI codec pins ALSA: hda - Fix the wrong pincaps set in ALC861VD dallas/hp fixup ALSA: hda - Set codec->single_adc_amp flag for Realtek codecs ASoC: atmel-ssc: change disable to disable in dts node ASoC: Prevent pop_wait overwrite ALSA: usb-audio: ignore-quirk for HP Wireless Audio ALSA: hda - Always turn on pins for HDMI/DP ALSA: hda - Fix pin configuration of HP Pavilion dv7 ASoC: core: Fix splitting of log messages ASoC: cs42l73: Change VSPIN/VSPOUT to VSPINOUT ASoC: cs42l73: Add DAPM events for power down. ASoC: cs42l73: Add DMIC's as DAPM inputs. ASoC: sigmadsp: Fix endianness conversion issue ASoC: tpa6130a2: Use devm_* APIs | 20 December 2012, 15:52:13 UTC |
| 85d5b70 | Linus Torvalds | 20 December 2012, 15:39:03 UTC | Merge tag 'upstream-3.8-rc1' of git://git.infradead.org/linux-ubi Pull UBI update from Artem Bityutskiy: "Nothing exciting, just clean-ups and nicification. Oh, and one small optimization which makes UBI to use less RAM." * tag 'upstream-3.8-rc1' of git://git.infradead.org/linux-ubi: UBI: embed ubi_debug_info field in ubi_device struct UBI: introduce helpers dbg_chk_{io, gen} UBI: replace memcpy with struct assignment UBI: remove spurious comment UBI: gluebi: rename misleading variables UBI: do not allocate the memory unnecessarily UBI: use list_move_tail instead of list_del/list_add_tail | 20 December 2012, 15:39:03 UTC |
| 43260ad | Linus Torvalds | 20 December 2012, 15:27:44 UTC | Merge tags 'disintegrate-h8300-20121219', 'disintegrate-m32r-20121219' and 'disintegrate-score-20121220' of git://git.infradead.org/users/dhowells/linux-headers Pull UAPI disintegration for H8/300, M32R and Score from David Howells. Scripted UAPI patches for architectures that apparently never reacted to it on their own. * tag 'disintegrate-h8300-20121219' of git://git.infradead.org/users/dhowells/linux-headers: UAPI: (Scripted) Disintegrate arch/h8300/include/asm * tag 'disintegrate-m32r-20121219' of git://git.infradead.org/users/dhowells/linux-headers: UAPI: (Scripted) Disintegrate arch/m32r/include/asm * tag 'disintegrate-score-20121220' of git://git.infradead.org/users/dhowells/linux-headers: UAPI: (Scripted) Disintegrate arch/score/include/asm | 20 December 2012, 15:27:44 UTC |
| 0c54450 | Linus Torvalds | 20 December 2012, 15:24:17 UTC | Merge tag 'cris-for-linus-3.8' of git://jni.nu/cris Pull CRIS changes from Jesper Nilsson. ... mainly the UAPI disintegration. * tag 'cris-for-linus-3.8' of git://jni.nu/cris: UAPI: Fix up empty files in arch/cris/ CRIS: locking: fix the return value of arch_read_trylock() CRIS: use kbuild.h instead of defining macros in asm-offset.c UAPI: (Scripted) Disintegrate arch/cris/include/asm UAPI: (Scripted) Disintegrate arch/cris/include/arch-v32/arch UAPI: (Scripted) Disintegrate arch/cris/include/arch-v10/arch | 20 December 2012, 15:24:17 UTC |
| 1ffab3d | Linus Torvalds | 20 December 2012, 15:21:54 UTC | Merge tag 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC fixes from Olof Johansson: "This is a batch of fixes for arm-soc platforms, most of it is for OMAP but there are others too (i.MX, Tegra, ep93xx). Fixes warnings, some broken platforms and drivers, etc. A bit all over the map really." There was some concern about commit 68136b10 ("RM: sunxi: Change device tree naming scheme for sunxi"), but Tony says: "Looks like that's trivial to fix as needed, no need to rebuild the branch to fix that AFAIK. The fix can be done once Olof is available online again. Linus, I suggest that you go ahead and pull this if there are no other issues with this branch." * tag 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (32 commits) ARM: sunxi: Change device tree naming scheme for sunxi ARM: ux500: fix missing include ARM: u300: delete custom pin hog code ARM: davinci: fix build break due to missing include ARM: exynos: Fix warning due to missing 'inline' in stub ARM: imx: Move platform-mx2-emma to arch/arm/mach-imx/devices ARM i.MX51 clock: Fix regression since enabling MIPI/HSP clocks ARM: dts: mx27: Fix the AIPI bus for FEC ARM: OMAP2+: common: remove use of vram ARM: OMAP3/4: cpuidle: fix sparse and checkpatch warnings ARM: OMAP4: clock data: DPLLs are missing bypass clocks in their parent lists ARM: OMAP4: clock data: div_iva_hs_clk is a power-of-two divider ARM: OMAP4: Fix EMU clock domain always on ARM: OMAP4460: Workaround ABE DPLL failing to turn-on ARM: OMAP4: Enhance support for DPLLs with 4X multiplier ARM: OMAP4: Add function table for non-M4X dplls ARM: OMAP4: Update timer clock aliases ARM: OMAP: Move plat/omap-serial.h to include/linux/platform_data/serial-omap.h ARM: dts: Add build target for omap4-panda-a4 ARM: dts: OMAP2420: Correct H4 board memory size ... | 20 December 2012, 15:21:54 UTC |
| ddedec2 | Linus Torvalds | 20 December 2012, 15:18:29 UTC | Merge tag 'tag-for-linus-3.8' of git://git.linaro.org/people/sumitsemwal/linux-dma-buf Pull dma-buf updates from Sumit Semwal: "A fairly small dma-buf pull request for 3.8 - only 2 patches" * tag 'tag-for-linus-3.8' of git://git.linaro.org/people/sumitsemwal/linux-dma-buf: dma-buf: remove fallback for !CONFIG_DMA_SHARED_BUFFER dma-buf: might_sleep() in dma_buf_unmap_attachment() | 20 December 2012, 15:18:29 UTC |
| 8cb68bd | Linus Torvalds | 20 December 2012, 15:07:18 UTC | Merge branch 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging Pull hwmon subsystem update from Jean Delvare: "There are many improvements to the it87 driver, as well as suspend support for the Winbond Super-I/O chips, and a few other fixes." * 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging: hwmon-vid: Add support for AMD family 11h to 15h processors hwmon: (it87) Support PECI for additional chips hwmon: (it87) Report thermal sensor type as Intel PECI if appropriate hwmon: (it87) Manage device specific features with table hwmon: (it87) Replace pwm group macro with direct attribute definitions hwmon: (it87) Avoid quoted string splits across lines hwmon: (it87) Save fan registers in 2-dimensional array hwmon: (it87) Introduce support for tempX_offset sysfs attribute hwmon: (it87) Replace macro defining tempX_type sensors with direct definitions hwmon: (it87) Save voltage register values in 2-dimensional array hwmon: (it87) Save temperature registers in 2-dimensional array hwmon: (w83627ehf) Get rid of smatch warnings hwmon: (w83627hf) Don't touch nonexistent I2C address registers hwmon: (w83627ehf) Add support for suspend hwmon: (w83627hf) Add support for suspend hwmon: Fix PCI device reference leak in quirk | 20 December 2012, 15:07:18 UTC |
| b6b19f2 | Hugh Dickins | 20 December 2012, 01:44:29 UTC | ksm: make rmap walks more scalable The rmap walks in ksm.c are like those in rmap.c: they can safely be done with anon_vma_lock_read(). Signed-off-by: Hugh Dickins <hughd@google.com> Acked-by: Mel Gorman <mgorman@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 20 December 2012, 15:06:56 UTC |
| 2832bc1 | Hugh Dickins | 20 December 2012, 01:42:16 UTC | sched: numa: ksm: fix oops in task_numa_placment() task_numa_placement() oopsed on NULL p->mm when task_numa_fault() got called in the handling of break_ksm() for ksmd. That might be a peculiar case, which perhaps KSM could takes steps to avoid? but it's more robust if task_numa_placement() allows for such a possibility. Signed-off-by: Hugh Dickins <hughd@google.com> Acked-by: Mel Gorman <mgorman@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 20 December 2012, 15:06:56 UTC |
| cda73a1 | Zlatko Calusic | 19 December 2012, 23:25:13 UTC | mm: do not sleep in balance_pgdat if there's no i/o congestion On a 4GB RAM machine, where Normal zone is much smaller than DMA32 zone, the Normal zone gets fragmented in time. This requires relatively more pressure in balance_pgdat to get the zone above the required watermark. Unfortunately, the congestion_wait() call in there slows it down for a completely wrong reason, expecting that there's a lot of writeback/swapout, even when there's none (much more common). After a few days, when fragmentation progresses, this flawed logic translates to a very high CPU iowait times, even though there's no I/O congestion at all. If THP is enabled, the problem occurs sooner, but I was able to see it even on !THP kernels, just by giving it a bit more time to occur. The proper way to deal with this is to not wait, unless there's congestion. Thanks to Mel Gorman, we already have the function that perfectly fits the job. The patch was tested on a machine which nicely revealed the problem after only 1 day of uptime, and it's been working great. Signed-off-by: Zlatko Calusic <zlatko.calusic@iskon.hr> Acked-by: Mel Gorman <mgorman@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 20 December 2012, 15:06:56 UTC |
| 77c8006 | David Howells | 22 October 2012, 12:18:44 UTC | UAPI: Fix up empty files in arch/cris/ Fix up three empty files in arch/cris/ by sticking placeholder comments in there to prevent the patch program from deleting them. I decided not to delete the arch-v*/Kbuild files as it's possibly someone might want to use them for genhdr-y lines in the future, but they could be deleted and the pointer lines removed from asm/Kbuild. The uapi/arch-v*/Kbuild files ought to be uneffected by such a change. asm/swab.h didn't have anything outside of __KERNEL__ so nothing appeared in uapi/asm/swab.h. The latter, however, is exported by Kbuild.asm. This needs to be applied after the CRIS UAPI disintegration patch. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com> | 20 December 2012, 11:51:25 UTC |
| 00addd1 | Wei Yongjun | 17 October 2012, 14:54:27 UTC | CRIS: locking: fix the return value of arch_read_trylock() arch_write_trylock() should return 'ret' instead of always return 1. dpatch engine is used to auto generate this patch. (https://github.com/weiyj/dpatch) Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com> | 20 December 2012, 11:51:19 UTC |
| e61ac0b | Jesper Nilsson | 20 December 2012, 11:48:53 UTC | Merge tag 'disintegrate-cris-20121009' of git://git.infradead.org/users/dhowells/linux-headers into for-linus2 UAPI Disintegration 2012-10-09 * tag 'disintegrate-cris-20121009' of git://git.infradead.org/users/dhowells/linux-headers: UAPI: (Scripted) Disintegrate arch/cris/include/asm UAPI: (Scripted) Disintegrate arch/cris/include/arch-v32/arch UAPI: (Scripted) Disintegrate arch/cris/include/arch-v10/arch | 20 December 2012, 11:48:53 UTC |
| 8e6b4dd | James Hogan | 11 October 2012, 09:00:58 UTC | CRIS: use kbuild.h instead of defining macros in asm-offset.c This is modelled on commits such as the one below: Commit fc1c3a003edb8a6778e64e10ef671a38c76c969e ("sh: use kbuild.h instead of defining macros in asm-offsets.c") introduced in v2.6.26. Signed-off-by: James Hogan <james.hogan@imgtec.com> Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com> | 20 December 2012, 11:45:40 UTC |
| d66d8c7 | David Howells | 20 December 2012, 10:53:58 UTC | UAPI: (Scripted) Disintegrate arch/score/include/asm Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Michael Kerrisk <mtk.manpages@gmail.com> Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Acked-by: Dave Jones <davej@redhat.com> Acked-by: Lennox Wu <lennox.wu@gmail.com> Acked-by: Liqin Chen <liqin299@gmail.com> | 20 December 2012, 10:55:33 UTC |
| ada65c7 | Maarten Lankhorst | 12 December 2012, 09:23:03 UTC | dma-buf: remove fallback for !CONFIG_DMA_SHARED_BUFFER Documentation says that code requiring dma-buf should add it to select, so inline fallbacks are not going to be used. A link error will make it obvious what went wrong, instead of silently doing nothing at runtime. Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Rob Clark <rob.clark@linaro.org> Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org> | 20 December 2012, 06:35:06 UTC |
| b6fa0cd | Rob Clark | 28 September 2012, 07:29:43 UTC | dma-buf: might_sleep() in dma_buf_unmap_attachment() We never really clarified if unmap could be done in atomic context. But since mapping might require sleeping, this implies mutex in use to synchronize mapping/unmapping, so unmap could sleep as well. Add a might_sleep() to clarify this. Signed-off-by: Rob Clark <rob@ti.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@canonical.com> Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org> | 20 December 2012, 06:35:05 UTC |
| f01af9f | Linus Torvalds | 20 December 2012, 04:31:02 UTC | Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc Pull sparc fixes from David Miller: "Please pull to get these sparc AES/DES/CAMELLIA crypto bug fixes as well as an addition of a pte_accessible() define for sparc64 and a hugetlb fix from Dave Kleikamp." * git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc: sparc64: Set CRYPTO_TFM_REQ_MAY_SLEEP consistently in CAMELLIA code. sparc64: Set CRYPTO_TFM_REQ_MAY_SLEEP consistently in DES code. sparc64: Fix ECB looping constructs in AES code. sparc64: Set CRYPTO_TFM_REQ_MAY_SLEEP consistently in AES code. sparc64: Fix AES ctr mode block size. sparc64: Fix unrolled AES 256-bit key loops. sparc64: Define pte_accessible() sparc: huge_ptep_set_* functions need to call set_huge_pte_at() | 20 December 2012, 04:31:02 UTC |
| 9eb127c | Linus Torvalds | 20 December 2012, 04:29:15 UTC | Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net Pull networking fixes from David Miller: 1) Really fix tuntap SKB use after free bug, from Eric Dumazet. 2) Adjust SKB data pointer to point past the transport header before calling icmpv6_notify() so that the headers are in the state which that function expects. From Duan Jiong. 3) Fix ambiguities in the new tuntap multi-queue APIs. From Jason Wang. 4) mISDN needs to use del_timer_sync(), from Konstantin Khlebnikov. 5) Don't destroy mutex after freeing up device private in mac802154, fix also from Konstantin Khlebnikov. 6) Fix INET request socket leak in TCP and DCCP, from Christoph Paasch. 7) SCTP HMAC kconfig rework, from Neil Horman. 8) Fix SCTP jprobes function signature, otherwise things explode, from Daniel Borkmann. 9) Fix typo in ipv6-offload Makefile variable reference, from Simon Arlott. 10) Don't fail USBNET open just because remote wakeup isn't supported, from Oliver Neukum. 11) be2net driver bug fixes from Sathya Perla. 12) SOLOS PCI ATM driver bug fixes from Nathan Williams and David Woodhouse. 13) Fix MTU changing regression in 8139cp driver, from John Greene. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (45 commits) solos-pci: ensure all TX packets are aligned to 4 bytes solos-pci: add firmware upgrade support for new models solos-pci: remove superfluous debug output solos-pci: add GPIO support for newer versions on Geos board 8139cp: Prevent dev_close/cp_interrupt race on MTU change net: qmi_wwan: add ZTE MF880 drivers/net: Use of_match_ptr() macro in smsc911x.c drivers/net: Use of_match_ptr() macro in smc91x.c ipv6: addrconf.c: remove unnecessary "if" bridge: Correctly encode addresses when dumping mdb entries bridge: Do not unregister all PF_BRIDGE rtnl operations use generic usbnet_manage_power() usbnet: generic manage_power() usbnet: handle PM failure gracefully ksz884x: fix receive polling race condition qlcnic: update driver version qlcnic: fix unused variable warnings net: fec: forbid FEC_PTP on SoCs that do not support be2net: fix wrong frag_idx reported by RX CQ be2net: fix be_close() to ensure all events are ack'ed ... | 20 December 2012, 04:29:15 UTC |
| e327955 | Linus Torvalds | 20 December 2012, 04:26:16 UTC | Merge tags 'dt-for-linus', 'gpio-for-linus' and 'spi-for-linus' of git://git.secretlab.ca/git/linux-2.6 Pull devicetree, gpio and spi bugfixes from Grant Likely: "Device tree v3.8 bug fix: - Fixes an undefined struct device build error and a missing symbol export. GPIO device driver bug fixes: - gpio/mvebu-gpio: Make mvebu-gpio depend on OF_CONFIG - gpio/ich: Add missing spinlock init SPI device driver bug fixes: - Most of this is bug fixes to the core code and the sh-hspi and s3c64xx device drivers. - There is also a patch here to add DT support to the Atmel driver. This one should have been in the first round, but I missed it. It's a low risk change contained within a single driver and the Atmel maintainer has requested it." * tag 'dt-for-linus' of git://git.secretlab.ca/git/linux-2.6: of: define struct device in of_platform.h if !OF_DEVICE and !OF_ADDRESS of: Fix export of of_find_matching_node_and_match() * tag 'gpio-for-linus' of git://git.secretlab.ca/git/linux-2.6: gpio/mvebu-gpio: Make mvebu-gpio depend on OF_CONFIG gpio/ich: Add missing spinlock init * tag 'spi-for-linus' of git://git.secretlab.ca/git/linux-2.6: spi/sh-hspi: fix return value check in hspi_probe(). spi: fix tegra SPI binding examples spi/atmel: add DT support of/spi: Fix SPI module loading by using proper "spi:" modalias prefixes. spi: Change FIFO flush operation and spi channel off spi: Keep chipselect assertion during one message | 20 December 2012, 04:26:16 UTC |
| dcd6a97 | Linus Torvalds | 20 December 2012, 04:24:25 UTC | Merge branch 'drm-next' of git://people.freedesktop.org/~airlied/linux Pull drm bugfix from Dave Airlie: "Just a single urgent regression fix, seeing a few wierd behaviours I'd like not to persist." * 'drm-next' of git://people.freedesktop.org/~airlied/linux: drm/ttm: fix delayed ttm_bo_cleanup_refs_and_unlock delayed handling | 20 December 2012, 04:24:25 UTC |
| 7005cd3 | Linus Torvalds | 20 December 2012, 04:23:37 UTC | Merge tag 'random_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/random Pull random updates from Ted Ts'o: "A few /dev/random improvements for the v3.8 merge window." * tag 'random_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/random: random: Mix cputime from each thread that exits to the pool random: prime last_data value per fips requirements random: fix debug format strings random: make it possible to enable debugging without rebuild | 20 December 2012, 04:23:37 UTC |
| 62ba63d | David S. Miller | 19 December 2012, 23:44:31 UTC | sparc64: Set CRYPTO_TFM_REQ_MAY_SLEEP consistently in CAMELLIA code. We use the FPU and therefore cannot sleep during the crypto loops. Signed-off-by: David S. Miller <davem@davemloft.net> | 19 December 2012, 23:44:31 UTC |
| b3a3794 | David S. Miller | 19 December 2012, 23:43:38 UTC | sparc64: Set CRYPTO_TFM_REQ_MAY_SLEEP consistently in DES code. We use the FPU and therefore cannot sleep during the crypto loops. Signed-off-by: David S. Miller <davem@davemloft.net> | 19 December 2012, 23:43:38 UTC |
| ce68895 | David S. Miller | 19 December 2012, 23:30:07 UTC | sparc64: Fix ECB looping constructs in AES code. Things works better when you increment the source buffer pointer properly. Signed-off-by: David S. Miller <davem@davemloft.net> | 19 December 2012, 23:30:07 UTC |
| b35d282 | David S. Miller | 19 December 2012, 23:22:03 UTC | sparc64: Set CRYPTO_TFM_REQ_MAY_SLEEP consistently in AES code. We use the FPU and therefore cannot sleep during the crypto loops. Signed-off-by: David S. Miller <davem@davemloft.net> | 19 December 2012, 23:22:03 UTC |
| a8d97ce | David S. Miller | 19 December 2012, 23:20:23 UTC | sparc64: Fix AES ctr mode block size. Like the generic versions, we need to support a block size of '1' for CTR mode AES. This was discovered thanks to all of the new test cases added by Jussi Kivilinna. Signed-off-by: David S. Miller <davem@davemloft.net> | 19 December 2012, 23:20:23 UTC |
| 9f28ffc | David S. Miller | 19 December 2012, 23:19:11 UTC | sparc64: Fix unrolled AES 256-bit key loops. The basic scheme of the block mode assembler is that we start by enabling the FPU, loading the key into the floating point registers, then iterate calling the encrypt/decrypt routine for each block. For the 256-bit key cases, we run short on registers in the unrolled loops. So the {ENCRYPT,DECRYPT}_256_2() macros reload the key registers that get clobbered. The unrolled macros, {ENCRYPT,DECRYPT}_256(), are not mindful of this. So if we have a mix of multi-block and single-block calls, the single-block unrolled 256-bit encrypt/decrypt can run with some of the key registers clobbered. Handle this by always explicitly loading those registers before using the non-unrolled 256-bit macro. This was discovered thanks to all of the new test cases added by Jussi Kivilinna. Signed-off-by: David S. Miller <davem@davemloft.net> | 19 December 2012, 23:19:11 UTC |
| 152a2a8 | David Woodhouse | 19 December 2012, 11:01:21 UTC | solos-pci: ensure all TX packets are aligned to 4 bytes The FPGA can't handled unaligned DMA (yet). So copy into an aligned buffer, if skb->data isn't suitably aligned. Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 19 December 2012, 22:53:53 UTC |
| 13af816 | Nathan Williams | 19 December 2012, 11:01:20 UTC | solos-pci: add firmware upgrade support for new models Signed-off-by: Nathan Williams <nathan@traverse.com.au> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 19 December 2012, 22:53:53 UTC |
| 7fbdadb | Nathan Williams | 19 December 2012, 11:01:19 UTC | solos-pci: remove superfluous debug output Signed-off-by: Nathan Williams <nathan@traverse.com.au> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 19 December 2012, 22:53:53 UTC |
| f9baad0 | Nathan Williams | 19 December 2012, 11:01:18 UTC | solos-pci: add GPIO support for newer versions on Geos board dwmw2: Tidy up a little, simpler matching on which GPIO is being accessed, only register on newer boards, register under PCI device instead of duplicating them under each ATM device. Signed-off-by: Nathan Williams <nathan@traverse.com.au> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 19 December 2012, 22:53:53 UTC |
| 83c34fd | John Greene | 19 December 2012, 09:47:48 UTC | 8139cp: Prevent dev_close/cp_interrupt race on MTU change commit: cb64edb6b89491edfdbae52ba7db9a8b8391d339 upstream Above commit may introduce a race between cp_interrupt and dev_close / change MTU / dev_open up state. Changes cp_interrupt to tolerate this. Change spin_locking in cp_interrupt to avoid possible but unobserved race. Reported-by: "Francois Romieu" <romieu@fr.zoreil.com> Tested on virtual hardware, Tx MTU size up to 4096, max tx payload was ping -s 4068 for MTU of 4096. No real hardware, need test assist. Signed-off-by: "John Greene" <jogreene@redhat.com> CC: "David S. Miller" <davem@davemloft.net> CC: "David Woodhouse" <David.Woodhouse@intel.com> Tested-by: David Woodhouse <David.Woodhouse@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 19 December 2012, 22:30:59 UTC |
| bc1008c | Gregory CLEMENT | 19 December 2012, 11:31:11 UTC | gpio/mvebu-gpio: Make mvebu-gpio depend on OF_CONFIG When building without device tree support (for the mv78x00 SoCs for example), the build failed because of_irq_count is undeclared. However mvebu-gpio is not designed to build without device tree support. So make it depends on OF_CONFIG, remove the #ifdef OF_CONFIG line and the platform_device_id. Tested on RD-78x00-mASA, DB-78460-BP, DB-88F6710-BP-DDR3, DB-MV784MP-GP, Mirabox and OpenBlocks AX3. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca> | 19 December 2012, 22:15:14 UTC |
| d39a948 | Jean Delvare | 16 December 2012, 20:31:40 UTC | gpio/ich: Add missing spinlock init As reported by CONFIG_DEBUG_SPINLOCK=y. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Peter Tyser <ptyser@xes-inc.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca> | 19 December 2012, 22:13:08 UTC |
| 0953e76 | Maarten Lankhorst | 19 December 2012, 17:21:10 UTC | drm/ttm: fix delayed ttm_bo_cleanup_refs_and_unlock delayed handling Fix regression introduced by 85b144f860176 "drm/ttm: call ttm_bo_cleanup_refs with reservation and lru lock held, v3" Slowpath ttm_bo_cleanup_refs_and_unlock accidentally tried to increase refcount on &bo->sync_obj instead of bo->sync_obj. The compiler didn't complain since sync_obj_ref takes a void pointer, so it was still valid c. This could result in lockups, memory corruptions, and warnings like these when graphics card VRAM usage is high: ------------[ cut here ]------------ WARNING: at include/linux/kref.h:42 radeon_fence_ref+0x2c/0x40() Hardware name: System Product Name Pid: 157, comm: X Not tainted 3.7.0-rc7-00520-g85b144f-dirty #174 Call Trace: [<ffffffff81058c84>] ? warn_slowpath_common+0x74/0xb0 [<ffffffff8129273c>] ? radeon_fence_ref+0x2c/0x40 [<ffffffff8125e95c>] ? ttm_bo_cleanup_refs_and_unlock+0x18c/0x2d0 [<ffffffff8125f17c>] ? ttm_mem_evict_first+0x1dc/0x2a0 [<ffffffff81264452>] ? ttm_bo_man_get_node+0x62/0xb0 [<ffffffff8125f4ce>] ? ttm_bo_mem_space+0x28e/0x340 [<ffffffff8125fb0c>] ? ttm_bo_move_buffer+0xfc/0x170 [<ffffffff810de172>] ? kmem_cache_alloc+0xb2/0xc0 [<ffffffff8125fc15>] ? ttm_bo_validate+0x95/0x110 [<ffffffff8125ff7c>] ? ttm_bo_init+0x2ec/0x3b0 [<ffffffff8129419a>] ? radeon_bo_create+0x18a/0x200 [<ffffffff81293e80>] ? radeon_bo_clear_va+0x40/0x40 [<ffffffff812a5342>] ? radeon_gem_object_create+0x92/0x160 [<ffffffff812a575c>] ? radeon_gem_create_ioctl+0x6c/0x150 [<ffffffff812a529f>] ? radeon_gem_object_free+0x2f/0x40 [<ffffffff81246b60>] ? drm_ioctl+0x420/0x4f0 [<ffffffff812a56f0>] ? radeon_gem_pwrite_ioctl+0x20/0x20 [<ffffffff810f53a4>] ? do_vfs_ioctl+0x2e4/0x4e0 [<ffffffff810e5588>] ? vfs_read+0x118/0x160 [<ffffffff810f55ec>] ? sys_ioctl+0x4c/0xa0 [<ffffffff810e5851>] ? sys_read+0x51/0xa0 [<ffffffff814b0612>] ? system_call_fastpath+0x16/0x1b Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com> Reported-by: Markus Trippelsdorf <markus@trippelsdorf.de> Acked-by: Paul Menzel <paulepanter@users.sourceforge.net> Signed-off-by: Dave Airlie <airlied@redhat.com> | 19 December 2012, 21:46:20 UTC |
| c8ecd27 | Jean Delvare | 19 December 2012, 21:17:02 UTC | hwmon-vid: Add support for AMD family 11h to 15h processors Since family 11h processors, AMD is exclusively using 7-bit VID codes transmitted using a serial protocol over two pins (clock and data.) Signed-off-by: Jean Delvare <khali@linux-fr.org> Tested-by: David Hubbard <david.c.hubbard@gmail.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> | 19 December 2012, 21:17:02 UTC |
| 1952978 | Guenter Roeck | 19 December 2012, 21:17:02 UTC | hwmon: (it87) Support PECI for additional chips Extend support for reporting and selecting PECI temperature sensors to IT8718, IT8720, IT8782, and IT8783. For IT8721, report the sensor type for temp2 as Intel PECI (6) if the chip is configured to report the PCH temperature. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Jean Delvare <khali@linux-fr.org> | 19 December 2012, 21:17:02 UTC |
| 5d8d2f2 | Guenter Roeck | 19 December 2012, 21:17:02 UTC | hwmon: (it87) Report thermal sensor type as Intel PECI if appropriate IT8721 and IT8728 support Intel PECI temperature reporting. Each sensor can be programmed to display the temperature reported on the PECI interface. If configured for Intel PECI, the driver reported the wrong sensor type for the respective thermal sensor. Fix the code to correctly report it as "Intel PECI (6)". Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Jean Delvare <khali@linux-fr.org> | 19 December 2012, 21:17:02 UTC |
| 483db43 | Guenter Roeck | 19 December 2012, 21:17:02 UTC | hwmon: (it87) Manage device specific features with table This simplifies the code, improves runtime performance, reduces code size (about 280 bytes on x86_64), and makes it easier to add support for new devices. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Jean Delvare <khali@linux-fr.org> | 19 December 2012, 21:17:02 UTC |
| c4458db | Guenter Roeck | 19 December 2012, 21:17:02 UTC | hwmon: (it87) Replace pwm group macro with direct attribute definitions Fix checkpatch error: ERROR: Macros with multiple statements should be enclosed in a do - while loop Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Jean Delvare <khali@linux-fr.org> | 19 December 2012, 21:17:02 UTC |
| 1d9bcf6 | Guenter Roeck | 19 December 2012, 21:17:01 UTC | hwmon: (it87) Avoid quoted string splits across lines Fix the respective checkpatch warnings. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Jean Delvare <khali@linux-fr.org> | 19 December 2012, 21:17:01 UTC |
| e1169ba | Guenter Roeck | 19 December 2012, 21:17:01 UTC | hwmon: (it87) Save fan registers in 2-dimensional array Also unify fan functions to use the same code for 8 and 16 bit fans. This patch reduces code size by approximately 1,200 bytes on x86_64. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Jean Delvare <khali@linux-fr.org> | 19 December 2012, 21:17:01 UTC |
| 161d898 | Guenter Roeck | 19 December 2012, 21:17:01 UTC | hwmon: (it87) Introduce support for tempX_offset sysfs attribute Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Jean Delvare <khali@linux-fr.org> | 19 December 2012, 21:17:01 UTC |
| 2cece01 | Guenter Roeck | 19 December 2012, 21:17:01 UTC | hwmon: (it87) Replace macro defining tempX_type sensors with direct definitions The macro name show_sensor_offset is confusing since it related to the sensor type, not an offset - even more so when we introduce offset attributes later on. Replace it with direct definitions, and replace the show_sensor/set_sensor function names with show_temp_type/set_temp_type. This also resolves a checkpatch error. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Jean Delvare <khali@linux-fr.org> | 19 December 2012, 21:17:01 UTC |
| 929c6a5 | Guenter Roeck | 19 December 2012, 21:17:00 UTC | hwmon: (it87) Save voltage register values in 2-dimensional array Reduces code size (more than 600 bytes on x86_64), and gets rid of some checkpatch errors. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Jean Delvare <khali@linux-fr.org> | 19 December 2012, 21:17:00 UTC |
| 60ca385 | Guenter Roeck | 19 December 2012, 21:17:00 UTC | hwmon: (it87) Save temperature registers in 2-dimensional array Cleaner code, fewer checkpatch errors, and reduced code size (saves more than 500 bytes on x86-64). Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Jean Delvare <khali@linux-fr.org> | 19 December 2012, 21:17:00 UTC |
| 45633fb | Jean Delvare | 19 December 2012, 21:17:00 UTC | hwmon: (w83627ehf) Get rid of smatch warnings The smatch static code analyzer complains: drivers/hwmon/w83627ehf.c:911 w83627ehf_update_device() error: buffer overflow 'W83627EHF_REG_TEMP_OFFSET' 3 <= 8 drivers/hwmon/w83627ehf.c:909 w83627ehf_update_device() error: buffer overflow 'data->temp_offset' 3 <= 8 drivers/hwmon/w83627ehf.c:2672 w83627ehf_resume() error: buffer overflow 'W83627EHF_REG_TEMP_OFFSET' 3 <= 8 drivers/hwmon/w83627ehf.c:2673 w83627ehf_resume() error: buffer overflow 'data->temp_offset' 3 <= 8 A deeper analysis of the code shows that these are false positives, as only the lower 3 bits of data->have_temp_offset can be set so the write is never attempted with i >= 3. However this shows that the code isn't very robust and future changes could easily introduce a buffer overflow. So let's add a safety check to prevent that and make smatch happy. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Peter Huewe <PeterHuewe@gmx.de> Reviewed-by: Guenter Roeck <linux@roeck-us.net> | 19 December 2012, 21:17:00 UTC |
| 8f3c7c5 | Jean Delvare | 19 December 2012, 21:17:00 UTC | hwmon: (w83627hf) Don't touch nonexistent I2C address registers Only the W83627HF could be accessed through I2C. All other supported chips are LPC-only, so they do not have I2C address registers. Don't write to nonexistent or reserved registers on these chips. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Guenter Roeck <linux@roeck-us.net> | 19 December 2012, 21:17:00 UTC |
| 7e630bb | Jean Delvare | 19 December 2012, 21:16:59 UTC | hwmon: (w83627ehf) Add support for suspend On suspend some register values are lost, most notably the Value RAM areas but also other limits and settings. Restore them on resume. Signed-off-by: Jean Delvare <khali@linux-fr.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Guenter Roeck <linux@roeck-us.net> | 19 December 2012, 21:16:59 UTC |
| 275b7d6 | Jean Delvare | 19 December 2012, 21:16:59 UTC | hwmon: (w83627hf) Add support for suspend On suspend some register values are lost, most notably the Value RAM areas but also other limits. Restore them on resume. On top of that, some fixups are needed to work around BIOS bugs, in particular when the BIOS omits running the same initialization sequence on resume that it does after boot. In that case we have to carry initialization over suspend. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Guenter Roeck <linux@roeck-us.net> | 19 December 2012, 21:16:59 UTC |
| d6dab7d | Jean Delvare | 19 December 2012, 21:16:59 UTC | hwmon: Fix PCI device reference leak in quirk Thankfully this only affects systems with one specific south bridge and is most probably harmless unless the hwmon module is heavily cycled. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Guenter Roeck <linux@roeck-us.net> | 19 December 2012, 21:16:59 UTC |
| 2f0bf92 | Linus Torvalds | 19 December 2012, 21:05:22 UTC | Merge tag 'xtensa-20121218' of git://github.com/czankel/xtensa-linux Pull Xtensa patchset from Chris Zankel: "This contains support of device trees, many fixes, and code clean-ups" * tag 'xtensa-20121218' of git://github.com/czankel/xtensa-linux: (33 commits) xtensa: don't try to build DTB when OF is disabled xtensa: set the correct ethernet address for xtfpga xtensa: clean up files to make them code-style compliant xtensa: provide endianness macro for sparse xtensa: fix RASID SR initialization xtensa: initialize CPENABLE SR when core has one xtensa: reset all timers on initialization Use for_each_compatible_node() macro. xtensa: add XTFPGA DTS xtensa: add support for the XTFPGA boards xtensa: add device trees support xtensa: add IRQ domains support xtensa: add U-Boot image support (uImage). xtensa: clean up boot make rules xtensa: fix mb and wmb definitions xtensa: add s32c1i-based spinlock implementations xtensa: add s32c1i-based bitops implementations xtensa: add s32c1i-based atomic ops implementations xtensa: add s32c1i sanity check xtensa: add trap_set_handler function ... | 19 December 2012, 21:05:22 UTC |
| 1bd12c9 | Linus Torvalds | 19 December 2012, 21:02:23 UTC | Merge branch 'x86/nuke386' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull one final 386 removal patch from Peter Anvin. IRQ 13 FPU error handling is gone. That was not one of the proudest moments in PC history. * 'x86/nuke386' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86, 386 removal: Remove support for IRQ 13 FPU error reporting | 19 December 2012, 21:02:23 UTC |
| 3dbff0d | Linus Torvalds | 19 December 2012, 20:56:42 UTC | Merge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull small x86 fixes from Peter Anvin: "A collection of very small fixes, mostly pure documentation." * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86, doc: Document that bootloader ID 4 is used also by iPXE x86, doc: Add a formal bootloader ID for kexec-tools x86, 8042: Enable A20 using KBC to fix S3 resume on some MSI laptops | 19 December 2012, 20:56:42 UTC |
| f8b8403 | Bjørn Mork | 19 December 2012, 04:15:51 UTC | net: qmi_wwan: add ZTE MF880 The driver description files gives these names to the vendor specific functions on this modem: diag: VID_19D2&PID_0284&MI_00 nmea: VID_19D2&PID_0284&MI_01 at: VID_19D2&PID_0284&MI_02 mdm: VID_19D2&PID_0284&MI_03 net: VID_19D2&PID_0284&MI_04 Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net> | 19 December 2012, 20:50:07 UTC |
| d62fdf8 | Sachin Kamat | 19 December 2012, 01:17:10 UTC | drivers/net: Use of_match_ptr() macro in smsc911x.c Add CONFIG_OF guard and use of_match_ptr macro. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net> | 19 December 2012, 20:50:07 UTC |
| 89ce376 | Sachin Kamat | 19 December 2012, 01:17:09 UTC | drivers/net: Use of_match_ptr() macro in smc91x.c This eliminates having an #ifdef returning NULL for the case when OF is disabled. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net> | 19 December 2012, 20:50:07 UTC |
| bd77902 | Cong Ding | 18 December 2012, 12:08:56 UTC | ipv6: addrconf.c: remove unnecessary "if" the value of err is always negative if it goes to errout, so we don't need to check the value of err. Signed-off-by: Cong Ding <dinggnu@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 19 December 2012, 20:50:06 UTC |
| 09d7cf7 | Vlad Yasevich | 18 December 2012, 11:54:08 UTC | bridge: Correctly encode addresses when dumping mdb entries When dumping mdb table, set the addresses the kernel returns based on the address protocol type. Signed-off-by: Vlad Yasevich <vyasevic@redhat.com> Acked-by: Cong Wang <amwang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 19 December 2012, 20:50:06 UTC |
| 6323315 | Vlad Yasevich | 19 December 2012, 09:13:48 UTC | bridge: Do not unregister all PF_BRIDGE rtnl operations Bridge fdb and link rtnl operations are registered in core/rtnetlink. Bridge mdb operations are registred in bridge/mdb. When removing bridge module, do not unregister ALL PF_BRIDGE ops since that would remove the ops from rtnetlink as well. Do remove mdb ops when bridge is destroyed. Signed-off-by: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 19 December 2012, 20:50:06 UTC |
| ca2a88f | Linus Torvalds | 19 December 2012, 20:47:41 UTC | Merge tag 'for-linus-20121219' of git://git.infradead.org/linux-mtd Pull MTD updates from David Woodhouse: - Various cleanups especially in NAND tests - Add support for NAND flash on BCMA bus - DT support for sh_flctl and denali NAND drivers - Kill obsolete/superceded drivers (fortunet, nomadik_nand) - Fix JFFS2 locking bug in ENOMEM failure path - New SPI flash chips, as usual - Support writing in 'reliable mode' for DiskOnChip G4 - Debugfs support in nandsim * tag 'for-linus-20121219' of git://git.infradead.org/linux-mtd: (96 commits) mtd: nand: typo in nand_id_has_period() comments mtd: nand/gpio: use io{read,write}*_rep accessors mtd: block2mtd: throttle writes by calling balance_dirty_pages_ratelimited. mtd: nand: gpmi: reset BCH earlier, too, to avoid NAND startup problems mtd: nand/docg4: fix and improve read of factory bbt mtd: nand/docg4: reserve bb marker area in ecclayout mtd: nand/docg4: add support for writing in reliable mode mtd: mxc_nand: reorder part_probes to let cmdline override other sources mtd: mxc_nand: fix unbalanced clk_disable() in error path mtd: nandsim: Introduce debugfs infrastructure mtd: physmap_of: error checking to prevent a NULL pointer dereference mtg: docg3: potential divide by zero in doc_write_oob() mtd: bcm47xxnflash: writing support mtd: tests/read: initialize buffer for whole next page mtd: at91: atmel_nand: return bit flips for the PMECC read_page() mtd: fix recovery after failed write-buffer operation in cfi_cmdset_0002.c mtd: nand: onfi need to be probed in 8 bits mode mtd: nand: add NAND_BUSWIDTH_AUTO to autodetect bus width mtd: nand: print flash size during detection mted: nand_wait_ready timeout fix ... | 19 December 2012, 20:47:41 UTC |
| a5e4070 | Oliver Neukum | 18 December 2012, 04:46:12 UTC | use generic usbnet_manage_power() This covers the drivers that can use a primitive implementation. Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: David S. Miller <davem@davemloft.net> | 19 December 2012, 20:46:40 UTC |
| 2dd7c8c | Oliver Neukum | 18 December 2012, 04:45:52 UTC | usbnet: generic manage_power() Centralise common code for manage_power() in usbnet by making a generic simple implementation Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: David S. Miller <davem@davemloft.net> | 19 December 2012, 20:46:40 UTC |
| a1c088e | Oliver Neukum | 18 December 2012, 04:45:29 UTC | usbnet: handle PM failure gracefully If a device fails to do remote wakeup, this is no reason to abort an open totally. This patch just continues without runtime PM. Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: David S. Miller <davem@davemloft.net> | 19 December 2012, 20:46:40 UTC |
| 4945106 | Lennert Buytenhek | 18 December 2012, 03:57:00 UTC | ksz884x: fix receive polling race condition The ksz884x driver does receive processing in a custom tasklet, and seems to be assuming that since it takes its private interface spinlock with spin_lock_irq(), it won't be running concurrently with its own interrupt handler, as it cannot be preempted by it, but since its interrupt handler doesn't do any locking whatsoever, the receive processing tasklet and interrupt handler can end up running concurrently on different CPUs. As a result of this, the ksz884x receive path ends up locking up fairly easily, when the receive processing tasklet's reenabling of receive interrupts (due to it being done with polling the receive ring) races with the interrupt handler's disabling of receive interrupts (due to a new receive interrupt coming in) resulting in the receive interrupt being masked but the receive processing tasklet not being scheduled. Fix this by making the ksz884x interrupt handler take its private interface spinlock. This requires upgrading the spin_lock() in the transmit cleanup tasklet to a spin_lock_irq(), as otherwise the IRQ handler can preempt transmit cleanup and deadlock the system, but with those two changes, no more receive lockups have been observed. Reported-by: Chris Healy <cphealy@gmail.com> Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> ---- Signed-off-by: David S. Miller <davem@davemloft.net> | 19 December 2012, 20:44:45 UTC |
| 341abdb | Signed-off-by: Sony Chacko | 18 December 2012, 07:59:51 UTC | qlcnic: update driver version Signed-off-by: Sony Chacko <sony.chacko@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 19 December 2012, 20:42:48 UTC |
| 5d17f36 | Shahed Shaikh | 18 December 2012, 07:59:50 UTC | qlcnic: fix unused variable warnings qlcnic_hw.c:370: warning: variable cmd_desc set but not used qlcnic_hw.c:368: warning: variable consumer set but not used qlcnic_main.c:448: warning: variable ref_count set but not used qlcnic_main.c:534: warning: variable mem_base set but not used qlcnic_ctx.c:137: warning: variable tmp_tmpl set but not used qlcnic_ctx.c:133: warning: variable version set but not used qlcnic_minidump.c:200: warning: variable opcode set but not used Signed-off-by: Shahed Shaikh <shahed.shaikh@qlogic.com> Signed-off-by: Sony Chacko <sony.chacko@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 19 December 2012, 20:42:48 UTC |
| 3935e89 | Bjørn Mork | 19 December 2012, 19:51:31 UTC | watchdog: Fix disable/enable regression Commit 8d4516904b39 ("watchdog: Fix CPU hotplug regression") causes an oops or hard lockup when doing echo 0 > /proc/sys/kernel/nmi_watchdog echo 1 > /proc/sys/kernel/nmi_watchdog and the kernel is booted with nmi_watchdog=1 (default) Running laptop-mode-tools and disconnecting/connecting AC power will cause this to trigger, making it a common failure scenario on laptops. Instead of bailing out of watchdog_disable() when !watchdog_enabled we can initialize the hrtimer regardless of watchdog_enabled status. This makes it safe to call watchdog_disable() in the nmi_watchdog=0 case, without the negative effect on the enabled => disabled => enabled case. All these tests pass with this patch: - nmi_watchdog=1 echo 0 > /proc/sys/kernel/nmi_watchdog echo 1 > /proc/sys/kernel/nmi_watchdog - nmi_watchdog=0 echo 0 > /sys/devices/system/cpu/cpu1/online - nmi_watchdog=0 echo mem > /sys/power/state Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=51661 Cc: <stable@vger.kernel.org> # v3.7 Cc: Norbert Warmuth <nwarmuth@t-online.de> Cc: Joseph Salisbury <joseph.salisbury@canonical.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 19 December 2012, 20:10:33 UTC |
| d67df2b | John W. Linville | 19 December 2012, 18:00:00 UTC | Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless into for-davem | 19 December 2012, 18:00:00 UTC |
| 74779e2 | Linus Torvalds | 19 December 2012, 16:19:07 UTC | Merge tag 'for-3.8-rc1' of git://gitorious.org/linux-pwm/linux-pwm Pull pwm changes from Thierry Reding: "A new driver has been added for the SPEAr platform and the TWL4030/6030 driver has been replaced by two drivers that control the regular PWMs and the PWM driven LEDs provided by the chips. The vt8500, tiecap, tiehrpwm, i.MX, LPC32xx and Samsung drivers have all been improved and the device tree bindings now support the PWM signal polarity." Fix up trivial conflicts due to __devinit/exit removal. * tag 'for-3.8-rc1' of git://gitorious.org/linux-pwm/linux-pwm: (21 commits) pwm: samsung: add missing s3c->pwm_id assignment pwm: lpc32xx: Set the chip base for dynamic allocation pwm: lpc32xx: Properly disable the clock on device removal pwm: lpc32xx: Fix the PWM polarity pwm: i.MX: eliminate build warning pwm: Export of_pwm_xlate_with_flags() pwm: Remove pwm-twl6030 driver pwm: New driver to support PWM driven LEDs on TWL4030/6030 series of PMICs pwm: New driver to support PWMs on TWL4030/6030 series of PMICs pwm: pwm-tiehrpwm: pinctrl support pwm: tiehrpwm: Add device-tree binding pwm: pwm-tiehrpwm: Adding TBCLK gating support. pwm: pwm-tiecap: pinctrl support pwm: tiecap: Add device-tree binding pwm: Add TI PWM subsystem driver pwm: Device tree support for PWM polarity pwm: vt8500: Ensure PWM clock is enabled during pwm_config pwm: vt8500: Fix build error pwm: spear: Staticize spear_pwm_config() pwm: Add SPEAr PWM chip driver support ... | 19 December 2012, 16:19:07 UTC |
| ab28698 | Jonas Gorski | 19 December 2012, 15:10:09 UTC | of: define struct device in of_platform.h if !OF_DEVICE and !OF_ADDRESS Fixes the following warning: include/linux/of_platform.h:106:13: warning: 'struct device' declared inside parameter list [enabled by default] include/linux/of_platform.h:106:13: warning: its scope is only this definition or declaration, which is probably not what you want [enabled by default] Signed-off-by: Jonas Gorski <jogo@openwrt.org> Signed-off-by: Rob Herring <robherring2@gmail.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca> | 19 December 2012, 16:15:17 UTC |
| 5031a2a | Linus Torvalds | 19 December 2012, 16:14:08 UTC | Merge tag 'for-v3.8-part2' of git://git.infradead.org/battery-2.6 Pull battery update, part 2, from Anton Vorontsov: "These are left overs that I didn't have time to review/apply before the merge window opened. I didn't want to "spoil" the first pull request with these late patches, so they were not included: - A small patch for the RX51 OMAP board (Nokia N900 phone), the patch creates a battery monitor device instance, so that it can be probed. It was acked by the OMAP maintainer; - A couple of late bug fixes for the charger-manager: corrects corner cases for the battery full handling." * tag 'for-v3.8-part2' of git://git.infradead.org/battery-2.6: charger-manager: Fix bug when check dropped voltage after fullbatt event charger-manager: Fix bug related to checking fully charged state of battery ARM: OMAP: rx51: Register platform device for rx51_battery | 19 December 2012, 16:14:08 UTC |
| f7f4dc1 | David Howells | 19 December 2012, 16:07:18 UTC | UAPI: (Scripted) Disintegrate arch/m32r/include/asm Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Michael Kerrisk <mtk.manpages@gmail.com> Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Acked-by: Dave Jones <davej@redhat.com> | 19 December 2012, 16:07:18 UTC |
| 1ec94e7 | David Howells | 19 December 2012, 16:07:13 UTC | UAPI: (Scripted) Disintegrate arch/h8300/include/asm Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Michael Kerrisk <mtk.manpages@gmail.com> Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Acked-by: Dave Jones <davej@redhat.com> | 19 December 2012, 16:07:13 UTC |
| 7a684c4 | Linus Torvalds | 19 December 2012, 15:55:08 UTC | Merge tag 'modules-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux Pull module update from Rusty Russell: "Nothing all that exciting; a new module-from-fd syscall for those who want to verify the source of the module (ChromeOS) and/or use standard IMA on it or other security hooks." * tag 'modules-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux: MODSIGN: Fix kbuild output when using default extra_certificates MODSIGN: Avoid using .incbin in C source modules: don't hand 0 to vmalloc. module: Remove a extra null character at the top of module->strtab. ASN.1: Use the ASN1_LONG_TAG and ASN1_INDEFINITE_LENGTH constants ASN.1: Define indefinite length marker constant moduleparam: use __UNIQUE_ID() __UNIQUE_ID() MODSIGN: Add modules_sign make target powerpc: add finit_module syscall. ima: support new kernel module syscall add finit_module syscall to asm-generic ARM: add finit_module syscall to ARM security: introduce kernel_module_from_file hook module: add flags arg to sys_finit_module() module: add syscall to load module from fd | 19 December 2012, 15:55:08 UTC |
| 7f2de81 | Linus Torvalds | 19 December 2012, 15:52:48 UTC | Merge tag 'byteswap-for-linus-20121219' of git://git.infradead.org/users/dwmw2/byteswap Pull preparatory gcc intrisics bswap patch from David Woodhouse: "This single patch is effectively a no-op for now. It enables architectures to opt in to using GCC's __builtin_bswapXX() intrinsics for byteswapping, and if we merge this now then the architecture maintainers can enable it for their arch during the next cycle without dependency issues. It's worth making it a par-arch opt-in, because although in *theory* the compiler should never do worse than hand-coded assembler (and of course it also ought to do a lot better on platforms like Atom and PowerPC which have load-and-swap or store-and-swap instructions), that isn't always the case. See http://gcc.gnu.org/bugzilla/show_bug.cgi?id=46453 for example." * tag 'byteswap-for-linus-20121219' of git://git.infradead.org/users/dwmw2/byteswap: byteorder: allow arch to opt to use GCC intrinsics for byteswapping | 19 December 2012, 15:52:48 UTC |
| 5977107 | Linus Torvalds | 19 December 2012, 15:18:35 UTC | blk: avoid divide-by-zero with zero discard granularity Commit 8dd2cb7e880d ("block: discard granularity might not be power of 2") changed a couple of 'binary and' operations into modulus operations. Which turned the harmless case of a zero discard_granularity into a possible divide-by-zero. The code also had a much more subtle bug: it was doing the modulus of a value in bytes using 'sector_t'. That was always conceptually wrong, but didn't actually matter back when the code assumed a power-of-two granularity: we only looked at the low bits anyway. But with potentially arbitrary sector numbers, using a 'sector_t' to express bytes is very very wrong: depending on configuration it limits the starting offset of the device to just 32 bits, and any overflow would result in a wrong value if the modulus wasn't a power-of-two. So re-write the code to not only protect against the divide-by-zero, but to do the starting sector arithmetic in sectors, and using the proper types. [ For any mathematicians out there: it also looks monumentally stupid to do the 'modulo granularity' operation *twice*, never mind having a "+ granularity" in the second modulus op. But that's the easiest way to avoid negative values or overflow, and it is how the original code was done. ] Reported-by: Ingo Molnar <mingo@kernel.org> Reported-by: Doug Anderson <dianders@chromium.org> Cc: Neil Brown <neilb@suse.de> Cc: Shaohua Li <shli@fusionio.com> Acked-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 19 December 2012, 15:18:35 UTC |
| d3601e5 | Cyril Roelandt | 12 December 2012, 00:24:54 UTC | spi/sh-hspi: fix return value check in hspi_probe(). According to its documentation, clk_get() returns a "valid IS_ERR() condition containing errno", so we should call IS_ERR() rather than a NULL check. Signed-off-by: Cyril Roelandt <tipecaml@gmail.com> Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca> | 19 December 2012, 15:11:41 UTC |
| 6a79131 | Allen Martin | 14 December 2012, 19:05:12 UTC | spi: fix tegra SPI binding examples Fix name of slink binding and address of sflash example to make it self consistent. Signed-off-by: Allen Martin <amartin@nvidia.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca> | 19 December 2012, 12:33:00 UTC |
| 80c2022 | Grant Likely | 19 December 2012, 10:45:36 UTC | of: Fix export of of_find_matching_node_and_match() Commit 50c8af4cf9, "of: introduce for_each_matching_node_and_match()" renamed of_find_matching_node() to of_find_matching_node_and_match() and created a new static inline of_find_matching_node() wrapper around the new name. However, the change neglected to change the EXPORT_SYMBOL() reference causing build errors for modules. This patch fixes the EXPORT_SYMBOL() statement. Discovered on a PowerPC Efika build with the mpc52xx_uart driver being built as a module. Reported-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Grant Likely <grant.likely@secretlab.ca> | 19 December 2012, 10:58:53 UTC |
| cb99864 | Damien Zammit | 19 December 2012, 10:27:22 UTC | ALSA: usb-audio: Support for Digidesign Mbox 2 USB sound card: This patch is the result of a lot of trial and error, since there are no specs available for the device. Full duplex support is provided, i.e. playback and recording in stereo. The format is hardcoded at 48000Hz @ 24 bit, which is the maximum that the device supports. Also, MIDI in and MIDI out both work. Users will notice that the S/PDIF light also flashes when playback or recording is active. I believe this means that S/PDIF input/output is simultaneously activated with the analogue i/o during use. But this particular functionality remains untested. Note that this particular version of the patch is so far untested on the physical hardware because I have not compiled a full kernel with the changes. However, extensive testing has been done by many users of the hardware who believe other versions of my patch have worked since circa 2009. [Modified to make a function static by tiwai] Signed-off-by: Damien Zammit <damien@zamaudio.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> | 19 December 2012, 10:27:22 UTC |
| 055d4db | Max Filippov | 10 December 2012, 21:26:21 UTC | xtensa: don't try to build DTB when OF is disabled Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Chris Zankel <chris@zankel.net> | 19 December 2012, 05:10:26 UTC |
| 33c760f | Chris Zankel | 29 November 2012, 00:52:09 UTC | xtensa: set the correct ethernet address for xtfpga The last byte of the mac address is determined by a DIP switch, so update the OF property with that address. Signed-off-by: Chris Zankel <chris@zankel.net> | 19 December 2012, 05:10:26 UTC |
| c4c4594 | Chris Zankel | 29 November 2012, 00:53:51 UTC | xtensa: clean up files to make them code-style compliant Remove heading and trailing spaces, trim trailing lines, and wrap lines that are longer than 80 characters. Signed-off-by: Chris Zankel <chris@zankel.net> | 19 December 2012, 05:10:25 UTC |
| 72100ed | Max Filippov | 10 December 2012, 21:26:25 UTC | xtensa: provide endianness macro for sparse Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Chris Zankel <chris@zankel.net> | 19 December 2012, 05:10:25 UTC |
| ec747b2 | Max Filippov | 10 December 2012, 21:26:24 UTC | xtensa: fix RASID SR initialization set_rasid_register accepts new RASID SR value, but ASID_USER_FIRST is ASID value for the ring 1; RASID value is made by ASID_INSERT macro. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Chris Zankel <chris@zankel.net> | 19 December 2012, 05:10:25 UTC |
| eab5e7a | Max Filippov | 10 December 2012, 21:26:23 UTC | xtensa: initialize CPENABLE SR when core has one XCHAL_CP_NUM is defined in variant/tie.h and it is not included by head.S, leaving CPENABLE register uninitialised. XCHAL_HAVE_CP is defined in variant/core.h to 1 when core has CPENABLE SR. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Chris Zankel <chris@zankel.net> | 19 December 2012, 05:10:25 UTC |
| 79fcf52 | Max Filippov | 10 December 2012, 21:26:22 UTC | xtensa: reset all timers on initialization There are XCHAL_NUM_TIMERS, reset them all. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Chris Zankel <chris@zankel.net> | 19 December 2012, 05:10:25 UTC |
| 90e3bc7 | Wei Yongjun | 03 December 2012, 08:35:11 UTC | Use for_each_compatible_node() macro. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Acked-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Chris Zankel <chris@zankel.net> | 19 December 2012, 05:10:25 UTC |
| 5584b4d | Max Filippov | 03 November 2012, 08:57:52 UTC | xtensa: add XTFPGA DTS Add common XTFPGA parts as *.dtsi (base board, flash) and DTS for LX60 and for ML605. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Chris Zankel <chris@zankel.net> | 19 December 2012, 05:10:24 UTC |
| 0d456ba | Max Filippov | 05 November 2012, 03:37:14 UTC | xtensa: add support for the XTFPGA boards The Avnet LX60/LX110/LX200 board is an FPGA board that can be configured with an Xtensa processor and an OpenCores Ethernet device. Signed-off-by: Chris Zankel <chris@zankel.net> Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Chris Zankel <chris@zankel.net> | 19 December 2012, 05:10:24 UTC |
