Skip to main content

Browse the archive

https://github.com/torvalds/linux
17 May 2024, 11:00:25 UTC
sort by:
Revision Author Date Message Commit Date
ba84590 Linus Walleij 29 March 2021, 22:46:49 UTC Merge tag 'intel-pinctrl-v5.12-3' of gitolite.kernel.org:pub/scm/linux/kernel/git/pinctrl/intel into fixes intel-pinctrl for v5.12-3 * Check if device is present, which is not the case in Xen The following is an automated git shortlog grouped by driver: intel: - check REVID register value for device presence 29 March 2021, 22:46:49 UTC
e0146a1 Jason Gunthorpe 29 March 2021, 19:00:16 UTC vfio/nvlink: Add missing SPAPR_TCE_IOMMU depends Compiling the nvlink stuff relies on the SPAPR_TCE_IOMMU otherwise there are compile errors: drivers/vfio/pci/vfio_pci_nvlink2.c:101:10: error: implicit declaration of function 'mm_iommu_put' [-Werror,-Wimplicit-function-declaration] ret = mm_iommu_put(data->mm, data->mem); As PPC only defines these functions when the config is set. Previously this wasn't a problem by chance as SPAPR_TCE_IOMMU was the only IOMMU that could have satisfied IOMMU_API on POWERNV. Fixes: 179209fa1270 ("vfio: IOMMU_API should be selected") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Message-Id: <0-v1-83dba9768fc3+419-vfio_nvlink2_kconfig_jgg@nvidia.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com> 29 March 2021, 20:48:00 UTC
1e43c37 Linus Torvalds 29 March 2021, 18:37:43 UTC Merge tag 'xtensa-20210329' of git://github.com/jcmvbkbc/linux-xtensa Pull xtensa fixes from Max Filippov: - fix build with separate exception vectors when they are placed too far from the rest of the kernel - fix uaccess-related livelock in do_page_fault. * tag 'xtensa-20210329' of git://github.com/jcmvbkbc/linux-xtensa: xtensa: fix uaccess-related livelock in do_page_fault xtensa: move coprocessor_flush to the .text section 29 March 2021, 18:37:43 UTC
7b9acbb Max Filippov 07 February 2021, 12:57:58 UTC xtensa: fix uaccess-related livelock in do_page_fault If a uaccess (e.g. get_user()) triggers a fault and there's a fault signal pending, the handler will return to the uaccess without having performed a uaccess fault fixup, and so the CPU will immediately execute the uaccess instruction again, whereupon it will livelock bouncing between that instruction and the fault handler. https://lore.kernel.org/lkml/20210121123140.GD48431@C02TD0UTHF1T.local/ Cc: stable@vger.kernel.org Reported-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> 29 March 2021, 18:25:11 UTC
5e61b84 Nirmoy Das 26 March 2021, 15:08:10 UTC drm/amdgpu: fix offset calculation in amdgpu_vm_bo_clear_mappings() Offset calculation wasn't correct as start addresses are in pfn not in bytes. CC: stable@vger.kernel.org Signed-off-by: Nirmoy Das <nirmoy.das@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> 29 March 2021, 18:05:49 UTC
acc7baa Evan Quan 23 March 2021, 08:30:38 UTC drm/amd/pm: no need to force MCLK to highest when no display connected Correct the check for vblank short. Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Tested-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org 29 March 2021, 18:05:20 UTC
9dfacc5 Adrian Hunter 26 March 2021, 10:56:19 UTC PM: runtime: Fix race getting/putting suppliers at probe pm_runtime_put_suppliers() must not decrement rpm_active unless the consumer is suspended. That is because, otherwise, it could suspend suppliers for an active consumer. That can happen as follows: static int driver_probe_device(struct device_driver *drv, struct device *dev) { int ret = 0; if (!device_is_registered(dev)) return -ENODEV; dev->can_match = true; pr_debug("bus: '%s': %s: matched device %s with driver %s\n", drv->bus->name, __func__, dev_name(dev), drv->name); pm_runtime_get_suppliers(dev); if (dev->parent) pm_runtime_get_sync(dev->parent); At this point, dev can runtime suspend so rpm_put_suppliers() can run, rpm_active becomes 1 (the lowest value). pm_runtime_barrier(dev); if (initcall_debug) ret = really_probe_debug(dev, drv); else ret = really_probe(dev, drv); Probe callback can have runtime resumed dev, and then runtime put so dev is awaiting autosuspend, but rpm_active is 2. pm_request_idle(dev); if (dev->parent) pm_runtime_put(dev->parent); pm_runtime_put_suppliers(dev); Now pm_runtime_put_suppliers() will put the supplier i.e. rpm_active 2 -> 1, but consumer can still be active. return ret; } Fix by checking the runtime status. For any status other than RPM_SUSPENDED, rpm_active can be considered to be "owned" by rpm_[get/put]_suppliers() and pm_runtime_put_suppliers() need do nothing. Reported-by: Asutosh Das <asutoshd@codeaurora.org> Fixes: 4c06c4e6cf63 ("driver core: Fix possible supplier PM-usage counter imbalance") Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: 5.1+ <stable@vger.kernel.org> # 5.1+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> 29 March 2021, 17:27:09 UTC
c0c3344 Adrian Hunter 26 March 2021, 10:56:18 UTC PM: runtime: Fix ordering in pm_runtime_get_suppliers() rpm_active indicates how many times the supplier usage_count has been incremented. Consequently it must be updated after pm_runtime_get_sync() of the supplier, not before. Fixes: 4c06c4e6cf63 ("driver core: Fix possible supplier PM-usage counter imbalance") Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: 5.1+ <stable@vger.kernel.org> # 5.1+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> 29 March 2021, 17:27:09 UTC
1a1c130 Rafael J. Wysocki 23 March 2021, 19:26:52 UTC ACPI: tables: x86: Reserve memory occupied by ACPI tables The following problem has been reported by George Kennedy: Since commit 7fef431be9c9 ("mm/page_alloc: place pages to tail in __free_pages_core()") the following use after free occurs intermittently when ACPI tables are accessed. BUG: KASAN: use-after-free in ibft_init+0x134/0xc49 Read of size 4 at addr ffff8880be453004 by task swapper/0/1 CPU: 3 PID: 1 Comm: swapper/0 Not tainted 5.12.0-rc1-7a7fd0d #1 Call Trace: dump_stack+0xf6/0x158 print_address_description.constprop.9+0x41/0x60 kasan_report.cold.14+0x7b/0xd4 __asan_report_load_n_noabort+0xf/0x20 ibft_init+0x134/0xc49 do_one_initcall+0xc4/0x3e0 kernel_init_freeable+0x5af/0x66b kernel_init+0x16/0x1d0 ret_from_fork+0x22/0x30 ACPI tables mapped via kmap() do not have their mapped pages reserved and the pages can be "stolen" by the buddy allocator. Apparently, on the affected system, the ACPI table in question is not located in "reserved" memory, like ACPI NVS or ACPI Data, that will not be used by the buddy allocator, so the memory occupied by that table has to be explicitly reserved to prevent the buddy allocator from using it. In order to address this problem, rearrange the initialization of the ACPI tables on x86 to locate the initial tables earlier and reserve the memory occupied by them. The other architectures using ACPI should not be affected by this change. Link: https://lore.kernel.org/linux-acpi/1614802160-29362-1-git-send-email-george.kennedy@oracle.com/ Reported-by: George Kennedy <george.kennedy@oracle.com> Tested-by: George Kennedy <george.kennedy@oracle.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Mike Rapoport <rppt@linux.ibm.com> Cc: 5.10+ <stable@vger.kernel.org> # 5.10+ 29 March 2021, 17:26:04 UTC
5152042 Pavel Begunkov 29 March 2021, 10:39:29 UTC io_uring: handle setup-failed ctx in kill_timeouts general protection fault, probably for non-canonical address 0xdffffc0000000018: 0000 [#1] KASAN: null-ptr-deref in range [0x00000000000000c0-0x00000000000000c7] RIP: 0010:io_commit_cqring+0x37f/0xc10 fs/io_uring.c:1318 Call Trace: io_kill_timeouts+0x2b5/0x320 fs/io_uring.c:8606 io_ring_ctx_wait_and_kill+0x1da/0x400 fs/io_uring.c:8629 io_uring_create fs/io_uring.c:9572 [inline] io_uring_setup+0x10da/0x2ae0 fs/io_uring.c:9599 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x44/0xae It can get into wait_and_kill() before setting up ctx->rings, and hence io_commit_cqring() fails. Mimic poll cancel and do it only when we completed events, there can't be any requests if it failed before initialising rings. Fixes: 80c4cbdb5ee60 ("io_uring: do post-completion chore on t-out cancel") Reported-by: syzbot+0e905eb8228070c457a0@syzkaller.appspotmail.com Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Link: https://lore.kernel.org/r/660261a48f0e7abf260c8e43c87edab3c16736fa.1617014345.git.asml.silence@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk> 29 March 2021, 12:48:26 UTC
625bd5a Ikjoon Jang 24 March 2021, 10:51:52 UTC ALSA: usb-audio: Apply sample rate quirk to Logitech Connect Logitech ConferenceCam Connect is a compound USB device with UVC and UAC. Not 100% reproducible but sometimes it keeps responding STALL to every control transfer once it receives get_freq request. This patch adds 046d:0x084c to a snd_usb_get_sample_rate_quirk list. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=203419 Signed-off-by: Ikjoon Jang <ikjn@chromium.org> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20210324105153.2322881-1-ikjn@chromium.org Signed-off-by: Takashi Iwai <tiwai@suse.de> 29 March 2021, 11:22:24 UTC
6161a43 Tian Tao 15 March 2021, 06:41:26 UTC drm/exynos/decon5433: Remove the unused include statements This driver doesn't reference of_gpio.h, so drop it. Signed-off-by: Tian Tao <tiantao6@hisilicon.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> 29 March 2021, 10:53:23 UTC
5a978dc Pavel Begunkov 27 March 2021, 09:59:30 UTC io_uring: always go for cancellation spin on exec Always try to do cancellation in __io_uring_task_cancel() at least once, so it actually goes and cleans its sqpoll tasks (i.e. via io_sqpoll_cancel_sync()), otherwise sqpoll task may submit new requests after cancellation and it's racy for many reasons. Fixes: 521d6a737a31c ("io_uring: cancel sqpoll via task_work") Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Link: https://lore.kernel.org/r/0a21bd6d794bb1629bc906dd57a57b2c2985a8ac.1616839147.git.asml.silence@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk> 29 March 2021, 00:11:53 UTC
a5e13c6 Linus Torvalds 28 March 2021, 22:48:16 UTC Linux 5.12-rc5 28 March 2021, 22:48:16 UTC
f9e2bb4 Linus Torvalds 28 March 2021, 20:22:54 UTC Merge tag 'perf-tools-fixes-for-v5.12-2020-03-28' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux Pull perf tooling fixes from Arnaldo Carvalho de Melo: - Avoid write of uninitialized memory when generating PERF_RECORD_MMAP* records. - Fix 'perf top' BPF support related crash with perf_event_paranoid=3 + kptr_restrict. - Validate raw event with sysfs exported format bits. - Fix waipid on SIGCHLD delivery bugs in 'perf daemon'. - Change to use bash for daemon test on Debian, where the default is dash and thus fails for use of bashisms in this test. - Fix memory leak in vDSO found using ASAN. - Remove now useless (due to the fact that BPF now supports static vars) failing sub test "BPF relocation checker". - Fix auxtrace queue conflict. - Sync linux/kvm.h with the kernel sources. * tag 'perf-tools-fixes-for-v5.12-2020-03-28' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: perf test: Change to use bash for daemon test perf record: Fix memory leak in vDSO found using ASAN perf test: Remove now useless failing sub test "BPF relocation checker" perf daemon: Return from kill functions perf daemon: Force waipid for all session on SIGCHLD delivery perf top: Fix BPF support related crash with perf_event_paranoid=3 + kptr_restrict perf pmu: Validate raw event with sysfs exported format bits perf synthetic events: Avoid write of uninitialized memory when generating PERF_RECORD_MMAP* records tools headers UAPI: Sync linux/kvm.h with the kernel sources perf synthetic-events: Fix uninitialized 'kernel_thread' variable perf auxtrace: Fix auxtrace queue conflict 28 March 2021, 20:22:54 UTC
3fef15f Linus Torvalds 28 March 2021, 20:20:38 UTC Merge tag 'auxdisplay-for-linus-v5.12-rc6' of git://github.com/ojeda/linux Pull auxdisplay fix from Miguel Ojeda: "Remove in_interrupt() usage (Sebastian Andrzej Siewior)" * tag 'auxdisplay-for-linus-v5.12-rc6' of git://github.com/ojeda/linux: auxdisplay: Remove in_interrupt() usage. 28 March 2021, 20:20:38 UTC
36a1463 Linus Torvalds 28 March 2021, 19:19:16 UTC Merge tag 'x86-urgent-2021-03-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Ingo Molnar: "Two fixes: - Fix build failure on Ubuntu with new GCC packages that turn on -fcf-protection - Fix SME memory encryption PTE encoding bug - AFAICT the code worked on 4K page sizes (level 1) but had the wrong shift at higher page level orders (level 2 and higher)" * tag 'x86-urgent-2021-03-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/build: Turn off -fcf-protection for realmode targets x86/mem_encrypt: Correct physical address calculation in __set_clr_pte_enc() 28 March 2021, 19:19:16 UTC
47fbbc9 Linus Torvalds 28 March 2021, 19:12:22 UTC Merge tag 'locking-urgent-2021-03-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull locking fix from Ingo Molnar: "Fix the non-debug mutex_lock_io_nested() method to map to mutex_lock_io() instead of mutex_lock(). Right now nothing uses this API explicitly, but this is an accident waiting to happen" * tag 'locking-urgent-2021-03-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: locking/mutex: Fix non debug version of mutex_lock_io_nested() 28 March 2021, 19:12:22 UTC
81b1d39 Linus Torvalds 28 March 2021, 19:06:21 UTC Merge tag '5.12-rc4-smb3' of git://git.samba.org/sfrench/cifs-2.6 Pull cifs fixes from Steve French: "Five cifs/smb3 fixes, two for stable. Includes an important fix for encryption and an ACL fix, as well as a fix for possible reflink data corruption" * tag '5.12-rc4-smb3' of git://git.samba.org/sfrench/cifs-2.6: smb3: fix cached file size problems in duplicate extents (reflink) cifs: Silently ignore unknown oplock break handle cifs: revalidate mapping when we open files for SMB1 POSIX cifs: Fix chmod with modefromsid when an older ACE already exists. cifs: Adjust key sizes and key generation routines for AES256 encryption 28 March 2021, 19:06:21 UTC
b44d1dd Linus Torvalds 28 March 2021, 18:42:05 UTC Merge tag 'io_uring-5.12-2021-03-27' of git://git.kernel.dk/linux-block Pull io_uring fixes from Jens Axboe: - Use thread info versions of flag testing, as discussed last week. - The series enabling PF_IO_WORKER to just take signals, instead of needing to special case that they do not in a bunch of places. Ends up being pretty trivial to do, and then we can revert all the special casing we're currently doing. - Kill dead pointer assignment - Fix hashed part of async work queue trace - Fix sign extension issue for IORING_OP_PROVIDE_BUFFERS - Fix a link completion ordering regression in this merge window - Cancellation fixes * tag 'io_uring-5.12-2021-03-27' of git://git.kernel.dk/linux-block: io_uring: remove unsued assignment to pointer io io_uring: don't cancel extra on files match io_uring: don't cancel-track common timeouts io_uring: do post-completion chore on t-out cancel io_uring: fix timeout cancel return code Revert "signal: don't allow STOP on PF_IO_WORKER threads" Revert "kernel: freezer should treat PF_IO_WORKER like PF_KTHREAD for freezing" Revert "kernel: treat PF_IO_WORKER like PF_KTHREAD for ptrace/signals" Revert "signal: don't allow sending any signals to PF_IO_WORKER threads" kernel: stop masking signals in create_io_thread() io_uring: handle signals for IO threads like a normal thread kernel: don't call do_exit() for PF_IO_WORKER threads io_uring: maintain CQE order of a failed link io-wq: fix race around pending work on teardown io_uring: do ctx sqd ejection in a clear context io_uring: fix provide_buffers sign extension io_uring: don't skip file_end_write() on reissue io_uring: correct io_queue_async_work() traces io_uring: don't use {test,clear}_tsk_thread_flag() for current 28 March 2021, 18:42:05 UTC
abed516 Linus Torvalds 28 March 2021, 18:37:42 UTC Merge tag 'block-5.12-2021-03-27' of git://git.kernel.dk/linux-block Pull block fixes from Jens Axboe: - Fix regression from this merge window with the xarray partition change, which allowed partition counts that overflow the u8 that holds the partition number (Ming) - Fix zone append warning (Johannes) - Segmentation count fix for multipage bvecs (David) - Partition scan fix (Chris) * tag 'block-5.12-2021-03-27' of git://git.kernel.dk/linux-block: block: don't create too many partitions block: support zone append bvecs block: recalculate segment count for multi-segment discards correctly block: clear GD_NEED_PART_SCAN later in bdev_disk_changed 28 March 2021, 18:37:42 UTC
e8cfe8f Linus Torvalds 28 March 2021, 18:34:47 UTC Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "Seven fixes, all in drivers (qla2xxx, mkt3sas, qedi, target, ibmvscsi). The most serious are the target pscsi oom and the qla2xxx revert which can otherwise cause a use after free" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: target: pscsi: Clean up after failure in pscsi_map_sg() scsi: target: pscsi: Avoid OOM in pscsi_map_sg() scsi: mpt3sas: Fix error return code of mpt3sas_base_attach() scsi: qedi: Fix error return code of qedi_alloc_global_queues() scsi: Revert "qla2xxx: Make sure that aborted commands are freed" scsi: ibmvfc: Make ibmvfc_wait_for_ops() MQ aware scsi: ibmvfc: Fix potential race in ibmvfc_wait_for_ops() 28 March 2021, 18:34:47 UTC
84d572e Matthew Rosato 25 March 2021, 13:41:52 UTC MAINTAINERS: add backups for s390 vfio drivers Add a backup for s390 vfio-pci, an additional backup for vfio-ccw and replace the backup for vfio-ap as Pierre is focusing on other areas. Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com> Acked-by: Eric Farman <farman@linux.ibm.com> Acked-by: Halil Pasic <pasic@linux.ibm.com> Acked-by: Pierre Morel <pmorel@linux.ibm.com> Acked-by: Jason J. Herne <jjherne@linux.ibm.com> Link: https://lore.kernel.org/r/1616679712-7139-1-git-send-email-mjrosato@linux.ibm.com Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> 28 March 2021, 18:20:33 UTC
4e53d17 Jens Axboe 26 March 2021, 16:05:25 UTC tomoyo: don't special case PF_IO_WORKER for PF_KTHREAD Since commit 3bfe6106693b6b4b ("io-wq: fork worker threads from original task") stopped using PF_KTHREAD flag for the io_uring PF_IO_WORKER threads, tomoyo_kernel_service() no longer needs to check PF_IO_WORKER flag. (This is a 5.12+ patch. Please don't send to stable kernels.) Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> 28 March 2021, 04:11:29 UTC
2b8ed1c Colin Ian King 26 March 2021, 19:52:51 UTC io_uring: remove unsued assignment to pointer io There is an assignment to io that is never read after the assignment, the assignment is redundant and can be removed. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> 27 March 2021, 20:09:11 UTC
78d9d7c Pavel Begunkov 25 March 2021, 18:32:45 UTC io_uring: don't cancel extra on files match As tasks always wait and kill their io-wq on exec/exit, files are of no more concern to us, so we don't need to specifically cancel them by hand in those cases. Moreover we should not, because io_match_task() looks at req->task->files now, which is always true and so leads to extra cancellations, that wasn't a case before per-task io-wq. Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Link: https://lore.kernel.org/r/0566c1de9b9dd417f5de345c817ca953580e0e2e.1616696997.git.asml.silence@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk> 27 March 2021, 20:09:11 UTC
2482b58 Pavel Begunkov 25 March 2021, 18:32:44 UTC io_uring: don't cancel-track common timeouts Don't account usual timeouts (i.e. not linked) as REQ_F_INFLIGHT but keep behaviour prior to dd59a3d595cc1 ("io_uring: reliably cancel linked timeouts"). Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Link: https://lore.kernel.org/r/104441ef5d97e3932113d44501fda0df88656b83.1616696997.git.asml.silence@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk> 27 March 2021, 20:09:11 UTC
80c4cbd Pavel Begunkov 25 March 2021, 18:32:43 UTC io_uring: do post-completion chore on t-out cancel Don't forget about io_commit_cqring() + io_cqring_ev_posted() after exit/exec cancelling timeouts. Both functions declared only after io_kill_timeouts(), so to avoid tons of forward declarations move it down. Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Link: https://lore.kernel.org/r/72ace588772c0f14834a6a4185d56c445a366fb4.1616696997.git.asml.silence@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk> 27 March 2021, 20:09:11 UTC
1ee4160 Pavel Begunkov 25 March 2021, 18:32:42 UTC io_uring: fix timeout cancel return code When we cancel a timeout we should emit a sensible return code, like -ECANCELED but not 0, otherwise it may trick users. Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Link: https://lore.kernel.org/r/7b0ad1065e3bd1994722702bd0ba9e7bc9b0683b.1616696997.git.asml.silence@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk> 27 March 2021, 20:09:11 UTC
1e4cf0d Jens Axboe 26 March 2021, 00:23:44 UTC Revert "signal: don't allow STOP on PF_IO_WORKER threads" This reverts commit 4db4b1a0d1779dc159f7b87feb97030ec0b12597. The IO threads allow and handle SIGSTOP now, so don't special case them anymore in task_set_jobctl_pending(). Signed-off-by: Jens Axboe <axboe@kernel.dk> 27 March 2021, 20:09:11 UTC
d3dc04c Jens Axboe 26 March 2021, 00:22:11 UTC Revert "kernel: freezer should treat PF_IO_WORKER like PF_KTHREAD for freezing" This reverts commit 15b2219facadec583c24523eed40fa45865f859f. Before IO threads accepted signals, the freezer using take signals to wake up an IO thread would cause them to loop without any way to clear the pending signal. That is no longer the case, so stop special casing PF_IO_WORKER in the freezer. Signed-off-by: Jens Axboe <axboe@kernel.dk> 27 March 2021, 20:09:10 UTC
e8b33b8 Jens Axboe 26 March 2021, 00:18:59 UTC Revert "kernel: treat PF_IO_WORKER like PF_KTHREAD for ptrace/signals" This reverts commit 6fb8f43cede0e4bd3ead847de78d531424a96be9. The IO threads do allow signals now, including SIGSTOP, and we can allow ptrace attach. Attaching won't reveal anything interesting for the IO threads, but it will allow eg gdb to attach to a task with io_urings and IO threads without complaining. And once attached, it will allow the usual introspection into regular threads. Signed-off-by: Jens Axboe <axboe@kernel.dk> 27 March 2021, 20:09:10 UTC
5a842a7 Jens Axboe 26 March 2021, 00:18:15 UTC Revert "signal: don't allow sending any signals to PF_IO_WORKER threads" This reverts commit 5be28c8f85ce99ed2d329d2ad8bdd18ea19473a5. IO threads now take signals just fine, so there's no reason to limit them specifically. Revert the change that prevented that from happening. Signed-off-by: Jens Axboe <axboe@kernel.dk> 27 March 2021, 20:09:10 UTC
b16b385 Jens Axboe 26 March 2021, 15:05:22 UTC kernel: stop masking signals in create_io_thread() This is racy - move the blocking into when the task is created and we're marking it as PF_IO_WORKER anyway. The IO threads are now prepared to handle signals like SIGSTOP as well, so clear that from the mask to allow proper stopping of IO threads. Acked-by: "Eric W. Biederman" <ebiederm@xmission.com> Reported-by: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> 27 March 2021, 20:09:10 UTC
dbe1bdb Jens Axboe 26 March 2021, 00:16:06 UTC io_uring: handle signals for IO threads like a normal thread We go through various hoops to disallow signals for the IO threads, but there's really no reason why we cannot just allow them. The IO threads never return to userspace like a normal thread, and hence don't go through normal signal processing. Instead, just check for a pending signal as part of the work loop, and call get_signal() to handle it for us if anything is pending. With that, we can support receiving signals, including special ones like SIGSTOP. Acked-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> 27 March 2021, 20:09:07 UTC
e82fc78 Ming Lei 27 March 2021, 07:13:09 UTC block: don't create too many partitions Commit a33df75c6328 ("block: use an xarray for disk->part_tbl") drops the check on max supported number of partitionsr, and allows partition with bigger partition numbers to be added. However, ->bd_partno is defined as u8, so partition index of xarray table may not match with ->bd_partno. Then delete_partition() may delete one unmatched partition, and caused use-after-free. Reviewed-by: Bart Van Assche <bvanassche@acm.org> Reported-by: syzbot+8fede7e30c7cee0de139@syzkaller.appspotmail.com Fixes: a33df75c6328 ("block: use an xarray for disk->part_tbl") Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> 27 March 2021, 15:22:18 UTC
3756b65 Greg Kroah-Hartman 27 March 2021, 11:39:18 UTC Merge tag 'icc-5.12-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/djakov/icc into char-misc-linus Georgi writes: interconnect fixes for v5.12 This contains a few tiny drivers and core fixes that have been reported during this cycle. - msm8939: Remove rpm-ids from non-RPM nodes - core: Fix error return code of icc_link_destroy() - core: Fix kerneldoc warning Signed-off-by: Georgi Djakov <djakov@kernel.org> * tag 'icc-5.12-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/djakov/icc: interconnect: Fix kerneldoc warning interconnect: core: fix error return code of icc_link_destroy() interconnect: qcom: msm8939: remove rpm-ids from non-RPM nodes 27 March 2021, 11:39:18 UTC
53e7bf5 Greg Kroah-Hartman 27 March 2021, 11:38:19 UTC Merge tag 'fpga-fixes-for-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/mdf/linux-fpga into char-misc-linus Moritz writes: FPGA Manager fixes for 5.12 Richard's fix addresses an errornously flipped flag. All patches have been reviewed on the mailing list, and have been in the last few linux-next releases (as part of my fixes branch) without issues. Signed-off-by: Moritz Fischer <mdf@kernel.org> * tag 'fpga-fixes-for-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/mdf/linux-fpga: firmware: stratix10-svc: reset COMMAND_RECONFIG_FLAG_PARTIAL to 0 27 March 2021, 11:38:19 UTC
cfc63fc Steve French 26 March 2021, 23:41:55 UTC smb3: fix cached file size problems in duplicate extents (reflink) There were two problems (one of which could cause data corruption) that were noticed with duplicate extents (ie reflink) when debugging why various xfstests were being incorrectly skipped (e.g. generic/138, generic/140, generic/142). First, we were not updating the file size locally in the cache when extending a file due to reflink (it would refresh after actimeo expires) but xfstest was checking the size immediately which was still 0 so caused the test to be skipped. Second, we were setting the target file size (which could shrink the file) in all cases to the end of the reflinked range rather than only setting the target file size when reflink would extend the file. CC: <stable@vger.kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com> 26 March 2021, 23:41:55 UTC
219481a Vincent Whitchurch 19 March 2021, 13:57:11 UTC cifs: Silently ignore unknown oplock break handle Make SMB2 not print out an error when an oplock break is received for an unknown handle, similar to SMB1. The debug message which is printed for these unknown handles may also be misleading, so fix that too. The SMB2 lease break path is not affected by this patch. Without this, a program which writes to a file from one thread, and opens, reads, and writes the same file from another thread triggers the below errors several times a minute when run against a Samba server configured with "smb2 leases = no". CIFS: VFS: \\192.168.0.1 No task to wake, unknown frame received! NumMids 2 00000000: 424d53fe 00000040 00000000 00000012 .SMB@........... 00000010: 00000001 00000000 ffffffff ffffffff ................ 00000020: 00000000 00000000 00000000 00000000 ................ 00000030: 00000000 00000000 00000000 00000000 ................ Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com> Reviewed-by: Tom Talpey <tom@talpey.com> Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz> Signed-off-by: Steve French <stfrench@microsoft.com> 26 March 2021, 23:05:26 UTC
cee8f4f Ronnie Sahlberg 25 March 2021, 06:26:35 UTC cifs: revalidate mapping when we open files for SMB1 POSIX RHBZ: 1933527 Under SMB1 + POSIX, if an inode is reused on a server after we have read and cached a part of a file, when we then open the new file with the re-cycled inode there is a chance that we may serve the old data out of cache to the application. This only happens for SMB1 (deprecated) and when posix are used. The simplest solution to avoid this race is to force a revalidate on smb1-posix open. Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com> Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz> Signed-off-by: Steve French <stfrench@microsoft.com> 26 March 2021, 23:04:58 UTC
3bffbe9 Shyam Prasad N 26 March 2021, 10:28:16 UTC cifs: Fix chmod with modefromsid when an older ACE already exists. My recent fixes to cifsacl to maintain inherited ACEs had regressed modefromsid when an older ACL already exists. Found testing xfstest 495 with modefromsid mount option Fixes: f5065508897a ("cifs: Retain old ACEs when converting between mode bits and ACL") Signed-off-by: Shyam Prasad N <sprasad@microsoft.com> Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz> Signed-off-by: Steve French <stfrench@microsoft.com> 26 March 2021, 23:04:35 UTC
1044299 Jens Axboe 26 March 2021, 14:57:10 UTC kernel: don't call do_exit() for PF_IO_WORKER threads Right now we're never calling get_signal() from PF_IO_WORKER threads, but in preparation for doing so, don't handle a fatal signal for them. The workers have state they need to cleanup when exiting, so just return instead of calling do_exit() on their behalf. The threads themselves will detect a fatal signal and do proper shutdown. Signed-off-by: Jens Axboe <axboe@kernel.dk> 26 March 2021, 22:10:14 UTC
0f4498c Linus Torvalds 26 March 2021, 19:21:05 UTC Merge tag 'for-5.12/dm-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm Pull device mapper fixes from Mike Snitzer: - Fix DM verity target's optional argument processing. - Fix DM core's zoned model and zone sectors checks. - Fix spurious "detected capacity change" pr_info() when creating new DM device. - Fix DM ioctl out of bounds array access in handling of DM_LIST_DEVICES_CMD when no devices exist. * tag 'for-5.12/dm-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: dm ioctl: fix out of bounds array access when no devices dm: don't report "detected capacity change" on device creation dm table: Fix zoned model check and zone sectors check dm verity: fix DM_VERITY_OPTS_MAX value 26 March 2021, 19:21:05 UTC
4edbe1d Mikulas Patocka 26 March 2021, 18:32:32 UTC dm ioctl: fix out of bounds array access when no devices If there are not any dm devices, we need to zero the "dev" argument in the first structure dm_name_list. However, this can cause out of bounds write, because the "needed" variable is zero and len may be less than eight. Fix this bug by reporting DM_BUFFER_FULL_FLAG if the result buffer is too small to hold the "nl->dev" value. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Cc: stable@vger.kernel.org Signed-off-by: Mike Snitzer <snitzer@redhat.com> 26 March 2021, 18:51:50 UTC
7931c53 Linus Torvalds 26 March 2021, 18:33:39 UTC Merge tag 'acpi-5.12-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI fixes from Rafael Wysocki: "These fix a memory management regression in ACPICA, repair an ACPI blacklist entry damaged inadvertently during the 5.11 cycle and fix the bookkeeping of devices with the same primary device ID in the ACPI core. Specifics: - Make ACPICA use the same object cache consistently when allocating and freeing objects (Vegard Nossum) - Add a callback pointer removed inadvertently during the 5.11 cycle to the ACPI backlight blacklist entry for Sony VPCEH3U1E (Chris Chiu) - Make the ACPI device enumeration core use IDA for creating names of ACPI device objects with the same primary device ID to avoid using duplicate device object names in some cases (Andy Shevchenko)" * tag 'acpi-5.12-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPICA: Always create namespace nodes using acpi_ns_create_node() ACPI: scan: Use unique number for instance_no ACPI: video: Add missing callback back for Sony VPCEH3U1E 26 March 2021, 18:33:39 UTC
8a3cbdd Linus Torvalds 26 March 2021, 18:29:36 UTC Merge tag 'pm-5.12-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management fixes from Rafael Wysocki: "These fix an issue related to device links in the runtime PM framework and debugfs usage in the Energy Model code. Specifics: - Modify the runtime PM device suspend to avoid suspending supplier devices before the consumer device's status changes to RPM_SUSPENDED (Rafael Wysocki) - Change the Energy Model code to prevent it from attempting to create its main debugfs directory too early (Lukasz Luba)" * tag 'pm-5.12-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: PM: EM: postpone creating the debugfs dir till fs_initcall PM: runtime: Defer suspending suppliers 26 March 2021, 18:29:36 UTC
eb3991e Linus Torvalds 26 March 2021, 18:19:38 UTC Merge tag 'soc-fixes-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC fixes from Arnd Bergmann: "Too many fixes have accumulated in the soc tree, so this is a fairly large set. As usual, most of the fixes are for devicetree files, but there are also notable code changes for imx and omap regressions as well as some maintainer file updates. imx: - Fix an Ethernet issue on imx6ul-14x14-evk board that is caused by independent PHY reset. - Add missing `dma-coherent` property for LayerScape device trees to fix a kernel BUG report. - Use IRQCHIP_DECLARE for AVIC driver to fix a boot issue on i.MX25 with fw_devlink=on. - Add missing I2C pinctrl entry for imx8mp-phyboard-pollux-rdk board to fix the broken I2C GPIO recovery support. - Add `fsl,use-minimum-ecc` property for imx6ull-myir-mys-6ulx-eval device tree to fix UBI filesystem mount failure. at91: - wrong phy address that blocks Ethernet use on boards with sama5d27 SoM1 - restrictive pin possibilities for sam9x60 omap: - Fix ocp interconnect bus access error reporting for omap_l3_noc by setting IRQF_NO_THREAD - Fix changed mmc slot order regression by adding mmc aliases for am335x - Fix dra7 reboot regression caused by invalid pcie reset map - Fix smartreflex init regression caused by dropped legacy data - Fix ti-sysc driver warning on unbind if reset is not deasserted - Fix flakey reset deassert for dra7 iva stm32: - MAINTAINER file updates broadcom: - brcmstb SoC ID build fix - MAINTAINER file updates" * tag 'soc-fixes-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: MAINTAINERS: Add Alain Volmat as STM32 I2C/SMBUS maintainer MAINTAINERS: Remove Vincent Abriou for STM/STI DRM drivers. MAINTAINERS: Update some st.com email addresses to foss.st.com ARM: dts: imx6ull: fix ubi filesystem mount failed ARM: imx6ul-14x14-evk: Do not reset the Ethernet PHYs independently arm64: dts: imx8mp-phyboard-pollux-rdk: Add missing pinctrl entry arm64: dts: ls1012a: mark crypto engine dma coherent arm64: dts: ls1043a: mark crypto engine dma coherent arm64: dts: ls1046a: mark crypto engine dma coherent ARM: imx: avic: Convert to using IRQCHIP_DECLARE ARM: dts: at91: sam9x60: fix mux-mask to match product's datasheet ARM: dts: at91: sam9x60: fix mux-mask for PA7 so it can be set to A, B and C ARM: dts: at91-sama5d27_som1: fix phy address to 7 soc: ti: omap-prm: Fix occasional abort on reset deassert for dra7 iva bus: ti-sysc: Fix warning on unbind if reset is not deasserted ARM: OMAP2+: Fix smartreflex init regression after dropping legacy data soc: ti: omap-prm: Fix reboot issue with invalid pcie reset map for dra7 MAINTAINERS: rectify BROADCOM PMB (POWER MANAGEMENT BUS) DRIVER ARM: dts: am33xx: add aliases for mmc interfaces bus: omap_l3_noc: mark l3 irqs as IRQF_NO_THREAD 26 March 2021, 18:19:38 UTC
6c20f6d Linus Torvalds 26 March 2021, 18:15:25 UTC Merge tag 'for-linus-5.12b-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen fixes from Juergen Gross: "This contains a small series with a more elegant fix of a problem which was originally fixed in rc2" * tag 'for-linus-5.12b-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: Revert "xen: fix p2m size in dom0 for disabled memory hotplug case" xen/x86: make XEN_BALLOON_MEMORY_HOTPLUG_LIMIT depend on MEMORY_HOTPLUG 26 March 2021, 18:15:25 UTC
f944d06 Linus Torvalds 26 March 2021, 18:05:18 UTC Merge tag 'drm-fixes-2021-03-26' of git://anongit.freedesktop.org/drm/drm Pull drm fixes from Dave Airlie: "As expected last week things were overly quiet so this week things seem to have caught up. It still isn't too major. msm and amdgpu lead the size here, the msm fixes are pretty varied across the driver, the amdgpu one is mostly the S0ix fixes with some other minor ones. Otherwise there are a few i915 fixes and one each for nouveau, etnaviv and rcar-du. msm: - pll fixes - shutdown hook fix - runtime resume fix - clear_oob fix - kms locking fix - display aux retry fix rcar-du: - warn_on in encoder init fix etnaviv: - Use FOLL_FORCE and FOLL_LONGTERM i915: - DisplayPort LTTPR fixes around link training and limiting it according to supported spec version. - Fix enabled_planes bitmask to really represent only logically enabled planes. - Fix DSS CTL registers for ICL DSI transcoders - Fix the GT fence revocation runtime PM logic. nouveau: - cursor size regression fix amdgpu: - S0ix fixes - Add PCI ID - Polaris PCIe DPM fix - Display fix for high refresh rate monitors" * tag 'drm-fixes-2021-03-26' of git://anongit.freedesktop.org/drm/drm: (37 commits) drm/nouveau/kms/nve4-nv108: Limit cursors to 128x128 drm/i915: Fix the GT fence revocation runtime PM logic drm/amdgpu/display: restore AUX_DPHY_TX_CONTROL for DCN2.x drm/amdgpu: Add additional Sienna Cichlid PCI ID drm/amd/pm: workaround for audio noise issue drm/i915/dsc: fix DSS CTL register usage for ICL DSI transcoders drm/i915: Fix enabled_planes bitmask drm/i915: Disable LTTPR support when the LTTPR rev < 1.4 drm/i915: Disable LTTPR support when the DPCD rev < 1.4 drm/i915/ilk-glk: Fix link training on links with LTTPRs drm/msm/disp/dpu1: icc path needs to be set before dpu runtime resume drm/amdgpu: skip kfd suspend/resume for S0ix drm/amdgpu: drop S0ix checks around CG/PG in suspend drm/amdgpu: skip CG/PG for gfx during S0ix drm/amdgpu: update comments about s0ix suspend/resume drm/amdgpu/swsmu: skip gfx cgpg on s0ix suspend drm/amdgpu: re-enable suspend phase 2 for S0ix drm/amdgpu: move s0ix check into amdgpu_device_ip_suspend_phase2 (v3) drm/amdgpu: clean up non-DC suspend/resume handling drm/amdgpu: don't evict vram on APUs for suspend to ram (v4) ... 26 March 2021, 18:05:18 UTC
57a9006 Pavel Machek 26 March 2021, 09:01:52 UTC remove Dan Murphy from TI from MAINTAINERS Dan's address bounces, and has been bouncing for some time as he moved to other projects. I believe TI should be more careful with this, and should assign alternate contacts for their drivers. Anyway what we can do now is to remove the obsolete address. Signed-off-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 26 March 2021, 18:02:35 UTC
a95d8f5 Geert Uytterhoeven 26 March 2021, 12:07:21 UTC cpufreq: Fix scaling_{available,boost}_frequencies_show() comments The function names in the comment blocks for the functions scaling_available_frequencies_show() and scaling_boost_frequencies_show() do not match the actual names. Fixes: 6f19efc0a1ca08bc ("cpufreq: Add boost frequency support in core") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> 26 March 2021, 16:43:48 UTC
e1db18b Rafael J. Wysocki 26 March 2021, 15:55:56 UTC Merge branches 'acpi-video' and 'acpi-scan' * acpi-video: ACPI: video: Add missing callback back for Sony VPCEH3U1E * acpi-scan: ACPI: scan: Use unique number for instance_no 26 March 2021, 15:55:56 UTC
6f3a283 Rafael J. Wysocki 26 March 2021, 15:44:26 UTC Merge branch 'pm-em' * pm-em: PM: EM: postpone creating the debugfs dir till fs_initcall 26 March 2021, 15:44:26 UTC
a846738 Jan Beulich 26 March 2021, 15:33:53 UTC xen-blkback: don't leak persistent grants from xen_blkbk_map() The fix for XSA-365 zapped too many of the ->persistent_gnt[] entries. Ones successfully obtained should not be overwritten, but instead left for xen_blkbk_unmap_prepare() to pick up and put. This is XSA-371. Signed-off-by: Jan Beulich <jbeulich@suse.com> Cc: stable@vger.kernel.org Reviewed-by: Juergen Gross <jgross@suse.com> Reviewed-by: Wei Liu <wl@xen.org> Signed-off-by: Juergen Gross <jgross@suse.com> 26 March 2021, 15:33:53 UTC
29d96eb Roja Rani Yarubandi 24 March 2021, 10:18:35 UTC soc: qcom-geni-se: Cleanup the code to remove proxy votes This reverts commit 048eb908a1f2 ("soc: qcom-geni-se: Add interconnect support to fix earlycon crash") ICC core and platforms drivers supports sync_state feature, which ensures that the default ICC BW votes from the bootloader is not removed until all it's consumers are probes. The proxy votes were needed in case other QUP child drivers I2C, SPI probes before UART, they can turn off the QUP-CORE clock which is shared resources for all QUP driver, this causes unclocked access to HW from earlycon. Given above support from ICC there is no longer need to maintain proxy votes on QUP-CORE ICC node from QUP wrapper driver for early console usecase, the default votes won't be removed until real console is probed. Cc: stable@vger.kernel.org Fixes: 266cd33b5913 ("interconnect: qcom: Ensure that the floor bandwidth value is enforced") Fixes: 7d3b0b0d8184 ("interconnect: qcom: Use icc_sync_state") Signed-off-by: Roja Rani Yarubandi <rojay@codeaurora.org> Signed-off-by: Akash Asthana <akashast@codeaurora.org> Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Link: https://lore.kernel.org/r/20210324101836.25272-2-rojay@codeaurora.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 26 March 2021, 14:16:05 UTC
93f6728 Artur Petrosyan 26 March 2021, 10:25:09 UTC usb: dwc2: Prevent core suspend when port connection flag is 0 In host mode port connection status flag is "0" when loading the driver. After loading the driver system asserts suspend which is handled by "_dwc2_hcd_suspend()" function. Before the system suspend the port connection status is "0". As result need to check the "port_connect_status" if it is "0", then skipping entering to suspend. Cc: <stable@vger.kernel.org> # 5.2 Fixes: 6f6d70597c15 ("usb: dwc2: bus suspend/resume for hosts with DWC2_POWER_DOWN_PARAM_NONE") Signed-off-by: Artur Petrosyan <Arthur.Petrosyan@synopsys.com> Link: https://lore.kernel.org/r/20210326102510.BDEDEA005D@mailhost.synopsys.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 26 March 2021, 13:51:34 UTC
5e3bbae Artur Petrosyan 26 March 2021, 10:24:46 UTC usb: dwc2: Fix HPRT0.PrtSusp bit setting for HiKey 960 board. Increased the waiting timeout for HPRT0.PrtSusp register field to be set, because on HiKey 960 board HPRT0.PrtSusp wasn't generated with the existing timeout. Cc: <stable@vger.kernel.org> # 4.18 Fixes: 22bb5cfdf13a ("usb: dwc2: Fix host exit from hibernation flow.") Signed-off-by: Artur Petrosyan <Arthur.Petrosyan@synopsys.com> Acked-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com> Link: https://lore.kernel.org/r/20210326102447.8F7FEA005D@mailhost.synopsys.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 26 March 2021, 13:51:22 UTC
92af4fc Tony Lindgren 24 March 2021, 07:11:41 UTC usb: musb: Fix suspend with devices connected for a64 Pinephone running on Allwinner A64 fails to suspend with USB devices connected as reported by Bhushan Shah <bshah@kde.org>. Reverting commit 5fbf7a253470 ("usb: musb: fix idling for suspend after disconnect interrupt") fixes the issue. Let's add suspend checks also for suspend after disconnect interrupt quirk handling like we already do elsewhere. Fixes: 5fbf7a253470 ("usb: musb: fix idling for suspend after disconnect interrupt") Reported-by: Bhushan Shah <bshah@kde.org> Tested-by: Bhushan Shah <bshah@kde.org> Signed-off-by: Tony Lindgren <tony@atomide.com> Link: https://lore.kernel.org/r/20210324071142.42264-1-tony@atomide.com Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 26 March 2021, 13:50:59 UTC
6f978a3 Chunfeng Yun 23 March 2021, 07:02:46 UTC usb: xhci-mtk: fix broken streams issue on 0.96 xHCI The MediaTek 0.96 xHCI controller on some platforms does not support bulk stream even HCCPARAMS says supporting, due to MaxPSASize is set a default value 1 by mistake, here use XHCI_BROKEN_STREAMS quirk to fix it. Fixes: 94a631d91ad3 ("usb: xhci-mtk: check hcc_params after adding primary hcd") Cc: stable <stable@vger.kernel.org> Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/1616482975-17841-4-git-send-email-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 26 March 2021, 13:50:44 UTC
5aef629 Wesley Cheng 24 March 2021, 18:31:04 UTC usb: dwc3: gadget: Clear DEP flags after stop transfers in ep disable Ensure that dep->flags are cleared until after stop active transfers is completed. Otherwise, the ENDXFER command will not be executed during ep disable. Fixes: f09ddcfcb8c5 ("usb: dwc3: gadget: Prevent EP queuing while stopping transfers") Cc: stable <stable@vger.kernel.org> Reported-and-tested-by: Andy Shevchenko <andy.shevchenko@gmail.com> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Wesley Cheng <wcheng@codeaurora.org> Link: https://lore.kernel.org/r/1616610664-16495-1-git-send-email-wcheng@codeaurora.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 26 March 2021, 13:50:00 UTC
1cc5ed2 Shuah Khan 24 March 2021, 23:06:54 UTC usbip: vhci_hcd fix shift out-of-bounds in vhci_hub_control() Fix shift out-of-bounds in vhci_hub_control() SetPortFeature handling. UBSAN: shift-out-of-bounds in drivers/usb/usbip/vhci_hcd.c:605:42 shift exponent 768 is too large for 32-bit type 'int' Reported-by: syzbot+3dea30b047f41084de66@syzkaller.appspotmail.com Cc: stable@vger.kernel.org Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Link: https://lore.kernel.org/r/20210324230654.34798-1-skhan@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 26 March 2021, 13:49:03 UTC
45a4546 Shyam Prasad N 25 March 2021, 12:34:54 UTC cifs: Adjust key sizes and key generation routines for AES256 encryption For AES256 encryption (GCM and CCM), we need to adjust the size of a few fields to 32 bytes instead of 16 to accommodate the larger keys. Also, the L value supplied to the key generator needs to be changed from to 256 when these algorithms are used. Keeping the ioctl struct for dumping keys of the same size for now. Will send out a different patch for that one. Signed-off-by: Shyam Prasad N <sprasad@microsoft.com> Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com> CC: <stable@vger.kernel.org> # v5.10+ Signed-off-by: Steve French <stfrench@microsoft.com> 26 March 2021, 12:49:39 UTC
1dc481c Leo Yan 20 March 2021, 10:45:54 UTC perf test: Change to use bash for daemon test When executing the daemon test on Arm64 and x86 with Debian (Buster) distro, both skip the test case with the log: # ./perf test -v 76 76: daemon operations : --- start --- test child forked, pid 11687 test daemon list trap: SIGINT: bad trap ./tests/shell/daemon.sh: 173: local: cpu-clock: bad variable name test child finished with -2 ---- end ---- daemon operations: Skip So the error happens for the variable expansion when use local variable in the shell script. Since Debian Buster uses dash but not bash as non-interactive shell, when execute the daemon testing, it hits a known issue for dash which was reported [1]. To resolve this issue, one option is to add double quotes for all local variables assignment, so need to change the code from: local line=`perf daemon --config ${config} -x: | head -2 | tail -1` ... to: local line="`perf daemon --config ${config} -x: | head -2 | tail -1`" But the testing script has bunch of local variables, this leads to big changes for whole script. On the other hand, the testing script asks to use the "local" feature which is bash-specific, so this patch explicitly uses "#!/bin/bash" to ensure running the script with bash. After: # ./perf test -v 76 76: daemon operations : --- start --- test child forked, pid 11329 test daemon list test daemon reconfig test daemon stop test daemon signal signal 12 sent to session 'test [11596]' signal 12 sent to session 'test [11596]' test daemon ping test daemon lock test child finished with 0 ---- end ---- daemon operations: Ok [1] https://bugs.launchpad.net/ubuntu/+source/dash/+bug/139097 Fixes: 2291bb915b55 ("perf tests: Add daemon 'list' command test") Signed-off-by: Leo Yan <leo.yan@linaro.org> Acked-by: Namhyung Kim <namhyung@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/20210320104554.529213-1-leo.yan@linaro.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> 26 March 2021, 11:56:57 UTC
53f1d31 Aneesh Kumar K.V 26 March 2021, 07:07:55 UTC powerpc/mm/book3s64: Use the correct storage key value when calling H_PROTECT H_PROTECT expects the flag value to include flags: AVPN, pp0, pp1, pp2, key0-key4, Noexec, CMO Option flags This patch updates hpte_updatepp() to fetch the storage key value from the linux page table and use the same in H_PROTECT hcall. native_hpte_updatepp() is not updated because the kernel doesn't clear the existing storage key value there. The kernel also doesn't use hpte_updatepp() callback for updating storage keys. This fixes the below kernel crash observed with KUAP enabled. BUG: Unable to handle kernel data access on write at 0xc009fffffc440000 Faulting instruction address: 0xc0000000000b7030 Key fault AMR: 0xfcffffffffffffff IAMR: 0xc0000077bc498100 Found HPTE: v = 0x40070adbb6fffc05 r = 0x1ffffffffff1194 Oops: Kernel access of bad area, sig: 11 [#1] LE PAGE_SIZE=64K MMU=Hash SMP NR_CPUS=2048 NUMA pSeries ... CFAR: c000000000010100 DAR: c009fffffc440000 DSISR: 02200000 IRQMASK: 0 ... NIP memset+0x68/0x104 LR pcpu_alloc+0x54c/0xb50 Call Trace: pcpu_alloc+0x55c/0xb50 (unreliable) blk_stat_alloc_callback+0x94/0x150 blk_mq_init_allocated_queue+0x64/0x560 blk_mq_init_queue+0x54/0xb0 scsi_mq_alloc_queue+0x30/0xa0 scsi_alloc_sdev+0x1cc/0x300 scsi_probe_and_add_lun+0xb50/0x1020 __scsi_scan_target+0x17c/0x790 scsi_scan_channel+0x90/0xe0 scsi_scan_host_selected+0x148/0x1f0 do_scan_async+0x2c/0x2a0 async_run_entry_fn+0x78/0x220 process_one_work+0x264/0x540 worker_thread+0xa8/0x600 kthread+0x190/0x1a0 ret_from_kernel_thread+0x5c/0x6c With KUAP enabled the kernel uses storage key 3 for all its translations. But as shown by the debug print, in this specific case we have the hash page table entry created with key value 0. Found HPTE: v = 0x40070adbb6fffc05 r = 0x1ffffffffff1194 and DSISR indicates a key fault. This can happen due to parallel fault on the same EA by different CPUs: CPU 0 CPU 1 fault on X H_PAGE_BUSY set fault on X finish fault handling and clear H_PAGE_BUSY check for H_PAGE_BUSY continue with fault handling. This implies CPU1 will end up calling hpte_updatepp for address X and the kernel updated the hash pte entry with key 0 Fixes: d94b827e89dc ("powerpc/book3s64/kuap: Use Key 3 for kernel mapping with hash translation") Reported-by: Murilo Opsfelder Araujo <muriloo@linux.ibm.com> Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Debugged-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20210326070755.304625-1-aneesh.kumar@linux.ibm.com 26 March 2021, 11:19:39 UTC
09d78dd Dave Airlie 26 March 2021, 02:59:21 UTC Merge tag 'drm-msm-fixes-2021-02-25' of https://gitlab.freedesktop.org/drm/msm into drm-fixes - pll fixes - shutdown hook fix - runtime resume fix - clear_oob fix - kms locking fix - display aux retry fix Signed-off-by: Dave Airlie <airlied@redhat.com> From: Rob Clark <robdclark@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGvmiMKRms_NVavD=NA_jbuexZUcqqL35ke7umqpp-TxMw@mail.gmail.com 26 March 2021, 03:04:17 UTC
db24726 Linus Torvalds 25 March 2021, 23:46:43 UTC Merge tag 'integrity-v5.12-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity Pull integrity fix from Mimi Zohar: "Just one patch to address a NULL ptr dereferencing when there is a mismatch between the user enabled LSMs and IMA/EVM" * tag 'integrity-v5.12-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity: integrity: double check iint_cache was initialized 25 March 2021, 23:46:43 UTC
701c09c Linus Torvalds 25 March 2021, 22:38:22 UTC Merge tag 'for-5.12-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux Pull btrfs fixes from David Sterba: "Fixes for issues that have some user visibility and are simple enough for this time of development cycle: - a few fixes for rescue= mount option, adding more checks for missing trees - fix sleeping in atomic context on qgroup deletion - fix subvolume deletion on mount - fix build with M= syntax - fix checksum mismatch error message for direct io" * tag 'for-5.12-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: btrfs: fix check_data_csum() error message for direct I/O btrfs: fix sleep while in non-sleep context during qgroup removal btrfs: fix subvolume/snapshot deletion not triggered on mount btrfs: fix build when using M=fs/btrfs btrfs: do not initialize dev replace for bad dev root btrfs: initialize device::fs_info always btrfs: do not initialize dev stats if we have no dev_root btrfs: zoned: remove outdated WARN_ON in direct IO 25 March 2021, 22:38:22 UTC
5b43bd1 Heiko Carstens 24 March 2021, 19:23:55 UTC s390/vdso: fix initializing and updating of vdso_data Li Wang reported that clock_gettime(CLOCK_MONOTONIC_RAW, ...) returns incorrect values when time is provided via vdso instead of system call: vdso_ts_nsec = 4484351380985507, vdso_ts.tv_sec = 4484351, vdso_ts.tv_nsec = 380985507 sys_ts_nsec = 1446923235377, sys_ts.tv_sec = 1446, sys_ts.tv_nsec = 923235377 Within the s390 specific vdso function __arch_get_hw_counter() reads tod clock steering values from the arch_data member of the passed in vdso_data structure. Problem is that only for the CS_HRES_COARSE vdso_data arch_data is initialized and gets updated. The CS_RAW specific vdso_data does not contain any valid tod_clock_steering information, which explains the different values. Fix this by initializing and updating all vdso_datas. Reported-by: Li Wang <liwang@redhat.com> Tested-by: Li Wang <liwang@redhat.com> Fixes: 1ba2d6c0fd4e ("s390/vdso: simplify __arch_get_hw_counter()") Link: https://lore.kernel.org/linux-s390/YFnxr1ZlMIOIqjfq@osiris Signed-off-by: Heiko Carstens <hca@linux.ibm.com> 25 March 2021, 20:57:26 UTC
b24bacd Heiko Carstens 24 March 2021, 19:22:42 UTC s390/vdso: fix tod_steering_delta type The s390 specific vdso function __arch_get_hw_counter() is supposed to consider tod clock steering. If a tod clock steering event happens and the tod clock is set to a new value __arch_get_hw_counter() will not return the real tod clock value but slowly drift it from the old delta until the returned value finally matches the real tod clock value again. Unfortunately the type of tod_steering_delta unsigned while it is supposed to be signed. It depends on if tod_steering_delta is negative or positive in which direction the vdso code drifts the clock value. Worst case is now that instead of drifting the clock slowly it will jump into the opposite direction by a factor of two. Fix this by simply making tod_steering_delta signed. Fixes: 4bff8cb54502 ("s390: convert to GENERIC_VDSO") Cc: <stable@vger.kernel.org> # 5.10 Signed-off-by: Heiko Carstens <hca@linux.ibm.com> 25 March 2021, 20:57:25 UTC
72bbc22 Heiko Carstens 23 March 2021, 20:40:11 UTC s390/vdso: copy tod_steering_delta value to vdso_data page When converting the vdso assembler code to C it was forgotten to actually copy the tod_steering_delta value to vdso_data page. Which in turn means that tod clock steering will not work correctly. Fix this by simply copying the value whenever it is updated. Fixes: 4bff8cb54502 ("s390: convert to GENERIC_VDSO") Cc: <stable@vger.kernel.org> # 5.10 Signed-off-by: Heiko Carstens <hca@linux.ibm.com> 25 March 2021, 20:57:25 UTC
4e8d123 Dave Airlie 25 March 2021, 20:28:17 UTC Merge tag 'amd-drm-fixes-5.12-2021-03-24' of https://gitlab.freedesktop.org/agd5f/linux into drm-fixes amd-drm-fixes-5.12-2021-03-24: amdgpu: - S0ix fixes - Add PCI ID - Polaris PCIe DPM fix - Display fix for high refresh rate monitors Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210324210630.3949-1-alexander.deucher@amd.com 25 March 2021, 20:28:18 UTC
8154042 Dave Airlie 25 March 2021, 20:25:08 UTC Merge branch 'linux-5.12' of git://github.com/skeggsb/linux into drm-fixes - cursor size fix Signed-off-by: Dave Airlie <airlied@redhat.com> From: Ben Skeggs <skeggsb@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/CACAvsv7js90N_PYc8JncQA9Hu0yjbg+vPw109FKxJ538nZ=fag@mail.gmail.com 25 March 2021, 20:27:31 UTC
5165fe0 Dave Airlie 25 March 2021, 20:21:18 UTC Merge tag 'drm-intel-fixes-2021-03-25-1' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes - DisplayPort LTTPR fixes around link training and limiting it according to supported spec version. (Imre) - Fix enabled_planes bitmask to really represent only logically enabled planes (Ville). - Fix DSS CTL registers for ICL DSI transcoders (Jani) - Fix the GT fence revocation runtime PM logic. (Imre) Signed-off-by: Dave Airlie <airlied@redhat.com> From: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/YFxYdrjqeUtSu+3p@intel.com 25 March 2021, 20:21:33 UTC
0f43ad7 Dave Airlie 25 March 2021, 20:18:14 UTC Merge tag 'drm-misc-fixes-2021-03-25' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixes drm-misc-fixes for v5.12: - Use FOLL_FORCE and FOLL_LONGTERM in etnaviv Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/72d4c9ce-6709-4e0f-a715-79fdcebb48e7@linux.intel.com 25 March 2021, 20:19:44 UTC
90b8749 Pavel Begunkov 25 March 2021, 19:05:14 UTC io_uring: maintain CQE order of a failed link Arguably we want CQEs of linked requests be in a strict order of submission as it always was. Now if init of a request fails its CQE may be posted before all prior linked requests including the head of the link. Fix it by failing it last. Fixes: de59bc104c24f ("io_uring: fail links more in io_submit_sqe()") Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Link: https://lore.kernel.org/r/b7a96b05832e7ab23ad55f84092a2548c4a888b0.1616699075.git.asml.silence@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk> 25 March 2021, 19:47:03 UTC
60c988b Daniel Jordan 25 March 2021, 01:05:52 UTC vfio/type1: Empty batch for pfnmap pages When vfio_pin_pages_remote() returns with a partial batch consisting of a single VM_PFNMAP pfn, a subsequent call will unfortunately try restoring it from batch->pages, resulting in vfio mapping the wrong page and unbalancing the page refcount. Prevent the function from returning with this kind of partial batch to avoid the issue. There's no explicit check for a VM_PFNMAP pfn because it's awkward to do so, so infer it from characteristics of the batch instead. This may result in occasional false positives but keeps the code simpler. Fixes: 4d83de6da265 ("vfio/type1: Batch page pinning") Link: https://lkml.kernel.org/r/20210323133254.33ed9161@omen.home.shazbot.org/ Reported-by: Alex Williamson <alex.williamson@redhat.com> Suggested-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Daniel Jordan <daniel.m.jordan@oracle.com> Message-Id: <20210325010552.185481-1-daniel.m.jordan@oracle.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com> 25 March 2021, 18:48:38 UTC
0023224 Linus Torvalds 25 March 2021, 18:43:43 UTC Merge branch 'akpm' (patches from Andrew) Merge misc fixes from Andrew Morton: "14 patches. Subsystems affected by this patch series: mm (hugetlb, kasan, gup, selftests, z3fold, kfence, memblock, and highmem), squashfs, ia64, gcov, and mailmap" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: mailmap: update Andrey Konovalov's email address mm/highmem: fix CONFIG_DEBUG_KMAP_LOCAL_FORCE_MAP mm: memblock: fix section mismatch warning again kfence: make compatible with kmemleak gcov: fix clang-11+ support ia64: fix format strings for err_inject ia64: mca: allocate early mca with GFP_ATOMIC squashfs: fix xattr id and id lookup sanity checks squashfs: fix inode lookup sanity checks z3fold: prevent reclaim/free race for headless pages selftests/vm: fix out-of-tree build mm/mmu_notifiers: ensure range_end() is paired with range_start() kasan: fix per-page tags for non-page_alloc pages hugetlb_cgroup: fix imbalanced css_get and css_put pair for shared mappings 25 March 2021, 18:43:43 UTC
2ba9bea Linus Torvalds 25 March 2021, 18:23:35 UTC Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma Pull rdma fixes from Jason Gunthorpe: "Not much going on, just some small bug fixes: - Typo causing a regression in mlx5 devx - Regression in the recent hns rework causing the HW to get out of sync - Long-standing cxgb4 adaptor crash when destroying cm ids" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: RDMA/cxgb4: Fix adapter LE hash errors while destroying ipv6 listening server RDMA/hns: Fix bug during CMDQ initialization RDMA/mlx5: Fix typo in destroy_mkey inbox 25 March 2021, 18:23:35 UTC
58e4b9d Linus Torvalds 25 March 2021, 18:11:45 UTC Merge tag 'mfd-fixes-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd Pull mfs fix from Lee Jones: "Unconstify editable placeholder structures" * tag 'mfd-fixes-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: mfd: intel_quark_i2c_gpio: Revert "Constify static struct resources" 25 March 2021, 18:11:45 UTC
43f0b56 Linus Torvalds 25 March 2021, 18:07:40 UTC Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 fixes from Will Deacon: "Minor fixes all over, ranging from typos to tests to errata workarounds: - Fix possible memory hotplug failure with KASLR - Fix FFR value in SVE kselftest - Fix backtraces reported in /proc/$pid/stack - Disable broken CnP implementation on NVIDIA Carmel - Typo fixes and ACPI documentation clarification - Fix some W=1 warnings" * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: kernel: disable CNP on Carmel arm64/process.c: fix Wmissing-prototypes build warnings kselftest/arm64: sve: Do not use non-canonical FFR register value arm64: mm: correct the inside linear map range during hotplug check arm64: kdump: update ppos when reading elfcorehdr arm64: cpuinfo: Fix a typo Documentation: arm64/acpi : clarify arm64 support of IBFT arm64: stacktrace: don't trace arch_stack_walk() arm64: csum: cast to the proper type 25 March 2021, 18:07:40 UTC
7aae543 Chris Chiu 25 March 2021, 14:04:19 UTC mailmap: update the email address for Chris Chiu Redirect my older email addresses in the git logs. Signed-off-by: Chris Chiu <chris.chiu@canonical.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 25 March 2021, 18:06:46 UTC
ff132c5 Bob Peterson 25 March 2021, 12:51:13 UTC gfs2: report "already frozen/thawed" errors Before this patch, gfs2's freeze function failed to report an error when the target file system was already frozen as it should (and as generic vfs function freeze_super does. Similarly, gfs2's thaw function failed to report an error when trying to thaw a file system that is not frozen, as vfs function thaw_super does. The errors were checked, but it always returned a 0 return code. This patch adds the missing error return codes to gfs2 freeze and thaw. Signed-off-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com> 25 March 2021, 17:53:38 UTC
d3e2ff2 Andrey Konovalov 25 March 2021, 04:37:56 UTC mailmap: update Andrey Konovalov's email address Use my personal email, the @google.com one will stop functioning soon. Link: https://lkml.kernel.org/r/ead0e9c32a2f70e0bde6f63b3b9470e0ef13d2ee.1616107969.git.andreyknvl@google.com Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 25 March 2021, 16:22:56 UTC
487cfad Ira Weiny 25 March 2021, 04:37:53 UTC mm/highmem: fix CONFIG_DEBUG_KMAP_LOCAL_FORCE_MAP The kernel test robot found that __kmap_local_sched_out() was not correctly skipping the guard pages when DEBUG_KMAP_LOCAL_FORCE_MAP was set.[1] This was due to DEBUG_HIGHMEM check being used. Change the configuration check to be correct. [1] https://lore.kernel.org/lkml/20210304083825.GB17830@xsang-OptiPlex-9020/ Link: https://lkml.kernel.org/r/20210318230657.1497881-1-ira.weiny@intel.com Fixes: 0e91a0c6984c ("mm/highmem: Provide CONFIG_DEBUG_KMAP_LOCAL_FORCE_MAP") Signed-off-by: Ira Weiny <ira.weiny@intel.com> Reported-by: kernel test robot <oliver.sang@intel.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Oliver Sang <oliver.sang@intel.com> Cc: Chaitanya Kulkarni <Chaitanya.Kulkarni@wdc.com> Cc: David Sterba <dsterba@suse.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 25 March 2021, 16:22:55 UTC
a024b7c Mike Rapoport 25 March 2021, 04:37:50 UTC mm: memblock: fix section mismatch warning again Commit 34dc2efb39a2 ("memblock: fix section mismatch warning") marked memblock_bottom_up() and memblock_set_bottom_up() as __init, but they could be referenced from non-init functions like memblock_find_in_range_node() on architectures that enable CONFIG_ARCH_KEEP_MEMBLOCK. For such builds kernel test robot reports: WARNING: modpost: vmlinux.o(.text+0x74fea4): Section mismatch in reference from the function memblock_find_in_range_node() to the function .init.text:memblock_bottom_up() The function memblock_find_in_range_node() references the function __init memblock_bottom_up(). This is often because memblock_find_in_range_node lacks a __init annotation or the annotation of memblock_bottom_up is wrong. Replace __init annotations with __init_memblock annotations so that the appropriate section will be selected depending on CONFIG_ARCH_KEEP_MEMBLOCK. Link: https://lore.kernel.org/lkml/202103160133.UzhgY0wt-lkp@intel.com Link: https://lkml.kernel.org/r/20210316171347.14084-1-rppt@kernel.org Fixes: 34dc2efb39a2 ("memblock: fix section mismatch warning") Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Reported-by: kernel test robot <lkp@intel.com> Reviewed-by: David Hildenbrand <david@redhat.com> Acked-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 25 March 2021, 16:22:55 UTC
9551158 Marco Elver 25 March 2021, 04:37:47 UTC kfence: make compatible with kmemleak Because memblock allocations are registered with kmemleak, the KFENCE pool was seen by kmemleak as one large object. Later allocations through kfence_alloc() that were registered with kmemleak via slab_post_alloc_hook() would then overlap and trigger a warning. Therefore, once the pool is initialized, we can remove (free) it from kmemleak again, since it should be treated as allocator-internal and be seen as "free memory". The second problem is that kmemleak is passed the rounded size, and not the originally requested size, which is also the size of KFENCE objects. To avoid kmemleak scanning past the end of an object and trigger a KFENCE out-of-bounds error, fix the size if it is a KFENCE object. For simplicity, to avoid a call to kfence_ksize() in slab_post_alloc_hook() (and avoid new IS_ENABLED(CONFIG_DEBUG_KMEMLEAK) guard), just call kfence_ksize() in mm/kmemleak.c:create_object(). Link: https://lkml.kernel.org/r/20210317084740.3099921-1-elver@google.com Signed-off-by: Marco Elver <elver@google.com> Reported-by: Luis Henriques <lhenriques@suse.de> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Tested-by: Luis Henriques <lhenriques@suse.de> Cc: Alexander Potapenko <glider@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Andrey Konovalov <andreyknvl@google.com> Cc: Jann Horn <jannh@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 25 March 2021, 16:22:55 UTC
60bcf72 Nick Desaulniers 25 March 2021, 04:37:44 UTC gcov: fix clang-11+ support LLVM changed the expected function signatures for llvm_gcda_start_file() and llvm_gcda_emit_function() in the clang-11 release. Users of clang-11 or newer may have noticed their kernels failing to boot due to a panic when enabling CONFIG_GCOV_KERNEL=y +CONFIG_GCOV_PROFILE_ALL=y. Fix up the function signatures so calling these functions doesn't panic the kernel. Link: https://reviews.llvm.org/rGcdd683b516d147925212724b09ec6fb792a40041 Link: https://reviews.llvm.org/rG13a633b438b6500ecad9e4f936ebadf3411d0f44 Link: https://lkml.kernel.org/r/20210312224132.3413602-2-ndesaulniers@google.com Signed-off-by: Nick Desaulniers <ndesaulniers@google.com> Reported-by: Prasad Sodagudi <psodagud@quicinc.com> Suggested-by: Nathan Chancellor <nathan@kernel.org> Reviewed-by: Fangrui Song <maskray@google.com> Tested-by: Nathan Chancellor <nathan@kernel.org> Acked-by: Peter Oberparleiter <oberpar@linux.ibm.com> Reviewed-by: Nathan Chancellor <nathan@kernel.org> Cc: <stable@vger.kernel.org> [5.4+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 25 March 2021, 16:22:55 UTC
95d44a4 Sergei Trofimovich 25 March 2021, 04:37:41 UTC ia64: fix format strings for err_inject Fix warning with %lx / u64 mismatch: arch/ia64/kernel/err_inject.c: In function 'show_resources': arch/ia64/kernel/err_inject.c:62:22: warning: format '%lx' expects argument of type 'long unsigned int', but argument 3 has type 'u64' {aka 'long long unsigned int'} 62 | return sprintf(buf, "%lx", name[cpu]); \ | ^~~~~~~ Link: https://lkml.kernel.org/r/20210313104312.1548232-1-slyfox@gentoo.org Signed-off-by: Sergei Trofimovich <slyfox@gentoo.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 25 March 2021, 16:22:55 UTC
f2a419c Sergei Trofimovich 25 March 2021, 04:37:38 UTC ia64: mca: allocate early mca with GFP_ATOMIC The sleep warning happens at early boot right at secondary CPU activation bootup: smp: Bringing up secondary CPUs ... BUG: sleeping function called from invalid context at mm/page_alloc.c:4942 in_atomic(): 0, irqs_disabled(): 1, non_block: 0, pid: 0, name: swapper/1 CPU: 1 PID: 0 Comm: swapper/1 Not tainted 5.12.0-rc2-00007-g79e228d0b611-dirty #99 .. Call Trace: show_stack+0x90/0xc0 dump_stack+0x150/0x1c0 ___might_sleep+0x1c0/0x2a0 __might_sleep+0xa0/0x160 __alloc_pages_nodemask+0x1a0/0x600 alloc_page_interleave+0x30/0x1c0 alloc_pages_current+0x2c0/0x340 __get_free_pages+0x30/0xa0 ia64_mca_cpu_init+0x2d0/0x3a0 cpu_init+0x8b0/0x1440 start_secondary+0x60/0x700 start_ap+0x750/0x780 Fixed BSP b0 value from CPU 1 As I understand interrupts are not enabled yet and system has a lot of memory. There is little chance to sleep and switch to GFP_ATOMIC should be a no-op. Link: https://lkml.kernel.org/r/20210315085045.204414-1-slyfox@gentoo.org Signed-off-by: Sergei Trofimovich <slyfox@gentoo.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 25 March 2021, 16:22:55 UTC
8b44ca2 Phillip Lougher 25 March 2021, 04:37:35 UTC squashfs: fix xattr id and id lookup sanity checks The checks for maximum metadata block size is missing SQUASHFS_BLOCK_OFFSET (the two byte length count). Link: https://lkml.kernel.org/r/2069685113.2081245.1614583677427@webmail.123-reg.co.uk Fixes: f37aa4c7366e23f ("squashfs: add more sanity checks in id lookup") Signed-off-by: Phillip Lougher <phillip@squashfs.org.uk> Cc: Sean Nyekjaer <sean@geanix.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 25 March 2021, 16:22:55 UTC
c1b2028 Sean Nyekjaer 25 March 2021, 04:37:32 UTC squashfs: fix inode lookup sanity checks When mouting a squashfs image created without inode compression it fails with: "unable to read inode lookup table" It turns out that the BLOCK_OFFSET is missing when checking the SQUASHFS_METADATA_SIZE agaist the actual size. Link: https://lkml.kernel.org/r/20210226092903.1473545-1-sean@geanix.com Fixes: eabac19e40c0 ("squashfs: add more sanity checks in inode lookup") Signed-off-by: Sean Nyekjaer <sean@geanix.com> Acked-by: Phillip Lougher <phillip@squashfs.org.uk> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 25 March 2021, 16:22:55 UTC
6d67957 Thomas Hebb 25 March 2021, 04:37:29 UTC z3fold: prevent reclaim/free race for headless pages Commit ca0246bb97c2 ("z3fold: fix possible reclaim races") introduced the PAGE_CLAIMED flag "to avoid racing on a z3fold 'headless' page release." By atomically testing and setting the bit in each of z3fold_free() and z3fold_reclaim_page(), a double-free was avoided. However, commit dcf5aedb24f8 ("z3fold: stricter locking and more careful reclaim") appears to have unintentionally broken this behavior by moving the PAGE_CLAIMED check in z3fold_reclaim_page() to after the page lock gets taken, which only happens for non-headless pages. For headless pages, the check is now skipped entirely and races can occur again. I have observed such a race on my system: page:00000000ffbd76b7 refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x165316 flags: 0x2ffff0000000000() raw: 02ffff0000000000 ffffea0004535f48 ffff8881d553a170 0000000000000000 raw: 0000000000000000 0000000000000011 00000000ffffffff 0000000000000000 page dumped because: VM_BUG_ON_PAGE(page_ref_count(page) == 0) ------------[ cut here ]------------ kernel BUG at include/linux/mm.h:707! invalid opcode: 0000 [#1] PREEMPT SMP KASAN PTI CPU: 2 PID: 291928 Comm: kworker/2:0 Tainted: G B 5.10.7-arch1-1-kasan #1 Hardware name: Gigabyte Technology Co., Ltd. H97N-WIFI/H97N-WIFI, BIOS F9b 03/03/2016 Workqueue: zswap-shrink shrink_worker RIP: 0010:__free_pages+0x10a/0x130 Code: c1 e7 06 48 01 ef 45 85 e4 74 d1 44 89 e6 31 d2 41 83 ec 01 e8 e7 b0 ff ff eb da 48 c7 c6 e0 32 91 88 48 89 ef e8 a6 89 f8 ff <0f> 0b 4c 89 e7 e8 fc 79 07 00 e9 33 ff ff ff 48 89 ef e8 ff 79 07 RSP: 0000:ffff88819a2ffb98 EFLAGS: 00010296 RAX: 0000000000000000 RBX: ffffea000594c5a8 RCX: 0000000000000000 RDX: 1ffffd4000b298b7 RSI: 0000000000000000 RDI: ffffea000594c5b8 RBP: ffffea000594c580 R08: 000000000000003e R09: ffff8881d5520bbb R10: ffffed103aaa4177 R11: 0000000000000001 R12: ffffea000594c5b4 R13: 0000000000000000 R14: ffff888165316000 R15: ffffea000594c588 FS: 0000000000000000(0000) GS:ffff8881d5500000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f7c8c3654d8 CR3: 0000000103f42004 CR4: 00000000001706e0 Call Trace: z3fold_zpool_shrink+0x9b6/0x1240 shrink_worker+0x35/0x90 process_one_work+0x70c/0x1210 worker_thread+0x539/0x1200 kthread+0x330/0x400 ret_from_fork+0x22/0x30 Modules linked in: rfcomm ebtable_filter ebtables ip6table_filter ip6_tables iptable_filter ccm algif_aead des_generic libdes ecb algif_skcipher cmac bnep md4 algif_hash af_alg vfat fat intel_rapl_msr intel_rapl_common x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel iwlmvm hid_logitech_hidpp kvm at24 mac80211 snd_hda_codec_realtek iTCO_wdt snd_hda_codec_generic intel_pmc_bxt snd_hda_codec_hdmi ledtrig_audio iTCO_vendor_support mei_wdt mei_hdcp snd_hda_intel snd_intel_dspcfg libarc4 soundwire_intel irqbypass iwlwifi soundwire_generic_allocation rapl soundwire_cadence intel_cstate snd_hda_codec intel_uncore btusb joydev mousedev snd_usb_audio pcspkr btrtl uvcvideo nouveau btbcm i2c_i801 btintel snd_hda_core videobuf2_vmalloc i2c_smbus snd_usbmidi_lib videobuf2_memops bluetooth snd_hwdep soundwire_bus snd_soc_rt5640 videobuf2_v4l2 cfg80211 snd_soc_rl6231 videobuf2_common snd_rawmidi lpc_ich alx videodev mdio snd_seq_device snd_soc_core mc ecdh_generic mxm_wmi mei_me hid_logitech_dj wmi snd_compress e1000e ac97_bus mei ttm rfkill snd_pcm_dmaengine ecc snd_pcm snd_timer snd soundcore mac_hid acpi_pad pkcs8_key_parser it87 hwmon_vid crypto_user fuse ip_tables x_tables ext4 crc32c_generic crc16 mbcache jbd2 dm_crypt cbc encrypted_keys trusted tpm rng_core usbhid dm_mod crct10dif_pclmul crc32_pclmul crc32c_intel ghash_clmulni_intel aesni_intel crypto_simd cryptd glue_helper xhci_pci xhci_pci_renesas i915 video intel_gtt i2c_algo_bit drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops cec drm agpgart ---[ end trace 126d646fc3dc0ad8 ]--- To fix the issue, re-add the earlier test and set in the case where we have a headless page. Link: https://lkml.kernel.org/r/c8106dbe6d8390b290cd1d7f873a2942e805349e.1615452048.git.tommyhebb@gmail.com Fixes: dcf5aedb24f8 ("z3fold: stricter locking and more careful reclaim") Signed-off-by: Thomas Hebb <tommyhebb@gmail.com> Reviewed-by: Vitaly Wool <vitaly.wool@konsulko.com> Cc: Jongseok Kim <ks77sj@gmail.com> Cc: Snild Dolkow <snild@sony.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 25 March 2021, 16:22:55 UTC
19ec368 Rong Chen 25 March 2021, 04:37:26 UTC selftests/vm: fix out-of-tree build When building out-of-tree, attempting to make target from $(OUTPUT) directory: make[1]: *** No rule to make target '$(OUTPUT)/protection_keys.c', needed by '$(OUTPUT)/protection_keys_32'. Link: https://lkml.kernel.org/r/20210315094700.522753-1-rong.a.chen@intel.com Signed-off-by: Rong Chen <rong.a.chen@intel.com> Reported-by: kernel test robot <lkp@intel.com> Cc: Shuah Khan <shuah@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 25 March 2021, 16:22:55 UTC
c265583 Sean Christopherson 25 March 2021, 04:37:23 UTC mm/mmu_notifiers: ensure range_end() is paired with range_start() If one or more notifiers fails .invalidate_range_start(), invoke .invalidate_range_end() for "all" notifiers. If there are multiple notifiers, those that did not fail are expecting _start() and _end() to be paired, e.g. KVM's mmu_notifier_count would become imbalanced. Disallow notifiers that can fail _start() from implementing _end() so that it's unnecessary to either track which notifiers rejected _start(), or had already succeeded prior to a failed _start(). Note, the existing behavior of calling _start() on all notifiers even after a previous notifier failed _start() was an unintented "feature". Make it canon now that the behavior is depended on for correctness. As of today, the bug is likely benign: 1. The only caller of the non-blocking notifier is OOM kill. 2. The only notifiers that can fail _start() are the i915 and Nouveau drivers. 3. The only notifiers that utilize _end() are the SGI UV GRU driver and KVM. 4. The GRU driver will never coincide with the i195/Nouveau drivers. 5. An imbalanced kvm->mmu_notifier_count only causes soft lockup in the _guest_, and the guest is already doomed due to being an OOM victim. Fix the bug now to play nice with future usage, e.g. KVM has a potential use case for blocking memslot updates in KVM while an invalidation is in-progress, and failure to unblock would result in said updates being blocked indefinitely and hanging. Found by inspection. Verified by adding a second notifier in KVM that periodically returns -EAGAIN on non-blockable ranges, triggering OOM, and observing that KVM exits with an elevated notifier count. Link: https://lkml.kernel.org/r/20210311180057.1582638-1-seanjc@google.com Fixes: 93065ac753e4 ("mm, oom: distinguish blockable mode for mmu notifiers") Signed-off-by: Sean Christopherson <seanjc@google.com> Suggested-by: Jason Gunthorpe <jgg@ziepe.ca> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Cc: David Rientjes <rientjes@google.com> Cc: Ben Gardon <bgardon@google.com> Cc: Michal Hocko <mhocko@suse.com> Cc: "Jérôme Glisse" <jglisse@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Dimitri Sivanich <dimitri.sivanich@hpe.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 25 March 2021, 16:22:55 UTC
cf10bd4 Andrey Konovalov 25 March 2021, 04:37:20 UTC kasan: fix per-page tags for non-page_alloc pages To allow performing tag checks on page_alloc addresses obtained via page_address(), tag-based KASAN modes store tags for page_alloc allocations in page->flags. Currently, the default tag value stored in page->flags is 0x00. Therefore, page_address() returns a 0x00ffff... address for pages that were not allocated via page_alloc. This might cause problems. A particular case we encountered is a conflict with KFENCE. If a KFENCE-allocated slab object is being freed via kfree(page_address(page) + offset), the address passed to kfree() will get tagged with 0x00 (as slab pages keep the default per-page tags). This leads to is_kfence_address() check failing, and a KFENCE object ending up in normal slab freelist, which causes memory corruptions. This patch changes the way KASAN stores tag in page-flags: they are now stored xor'ed with 0xff. This way, KASAN doesn't need to initialize per-page flags for every created page, which might be slow. With this change, page_address() returns natively-tagged (with 0xff) pointers for pages that didn't have tags set explicitly. This patch fixes the encountered conflict with KFENCE and prevents more similar issues that can occur in the future. Link: https://lkml.kernel.org/r/1a41abb11c51b264511d9e71c303bb16d5cb367b.1615475452.git.andreyknvl@google.com Fixes: 2813b9c02962 ("kasan, mm, arm64: tag non slab memory allocated via pagealloc") Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Reviewed-by: Marco Elver <elver@google.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Alexander Potapenko <glider@google.com> Cc: Peter Collingbourne <pcc@google.com> Cc: Evgenii Stepanov <eugenis@google.com> Cc: Branislav Rankov <Branislav.Rankov@arm.com> Cc: Kevin Brodsky <kevin.brodsky@arm.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 25 March 2021, 16:22:55 UTC
d85aecf Miaohe Lin 25 March 2021, 04:37:17 UTC hugetlb_cgroup: fix imbalanced css_get and css_put pair for shared mappings The current implementation of hugetlb_cgroup for shared mappings could have different behavior. Consider the following two scenarios: 1.Assume initial css reference count of hugetlb_cgroup is 1: 1.1 Call hugetlb_reserve_pages with from = 1, to = 2. So css reference count is 2 associated with 1 file_region. 1.2 Call hugetlb_reserve_pages with from = 2, to = 3. So css reference count is 3 associated with 2 file_region. 1.3 coalesce_file_region will coalesce these two file_regions into one. So css reference count is 3 associated with 1 file_region now. 2.Assume initial css reference count of hugetlb_cgroup is 1 again: 2.1 Call hugetlb_reserve_pages with from = 1, to = 3. So css reference count is 2 associated with 1 file_region. Therefore, we might have one file_region while holding one or more css reference counts. This inconsistency could lead to imbalanced css_get() and css_put() pair. If we do css_put one by one (i.g. hole punch case), scenario 2 would put one more css reference. If we do css_put all together (i.g. truncate case), scenario 1 will leak one css reference. The imbalanced css_get() and css_put() pair would result in a non-zero reference when we try to destroy the hugetlb cgroup. The hugetlb cgroup directory is removed __but__ associated resource is not freed. This might result in OOM or can not create a new hugetlb cgroup in a busy workload ultimately. In order to fix this, we have to make sure that one file_region must hold exactly one css reference. So in coalesce_file_region case, we should release one css reference before coalescence. Also only put css reference when the entire file_region is removed. The last thing to note is that the caller of region_add() will only hold one reference to h_cg->css for the whole contiguous reservation region. But this area might be scattered when there are already some file_regions reside in it. As a result, many file_regions may share only one h_cg->css reference. In order to ensure that one file_region must hold exactly one css reference, we should do css_get() for each file_region and release the reference held by caller when they are done. [linmiaohe@huawei.com: fix imbalanced css_get and css_put pair for shared mappings] Link: https://lkml.kernel.org/r/20210316023002.53921-1-linmiaohe@huawei.com Link: https://lkml.kernel.org/r/20210301120540.37076-1-linmiaohe@huawei.com Fixes: 075a61d07a8e ("hugetlb_cgroup: add accounting for shared mappings") Reported-by: kernel test robot <lkp@intel.com> (auto build test ERROR) Signed-off-by: Miaohe Lin <linmiaohe@huawei.com> Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Cc: Wanpeng Li <liwp.linux@gmail.com> Cc: Mina Almasry <almasrymina@google.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 25 March 2021, 16:22:55 UTC
f5d2d23 Jens Axboe 25 March 2021, 16:16:12 UTC io-wq: fix race around pending work on teardown syzbot reports that it's triggering the warning condition on having pending work on shutdown: WARNING: CPU: 1 PID: 12346 at fs/io-wq.c:1061 io_wq_destroy fs/io-wq.c:1061 [inline] WARNING: CPU: 1 PID: 12346 at fs/io-wq.c:1061 io_wq_put+0x153/0x260 fs/io-wq.c:1072 Modules linked in: CPU: 1 PID: 12346 Comm: syz-executor.5 Not tainted 5.12.0-rc2-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:io_wq_destroy fs/io-wq.c:1061 [inline] RIP: 0010:io_wq_put+0x153/0x260 fs/io-wq.c:1072 Code: 8d e8 71 90 ea 01 49 89 c4 41 83 fc 40 7d 4f e8 33 4d 97 ff 42 80 7c 2d 00 00 0f 85 77 ff ff ff e9 7a ff ff ff e8 1d 4d 97 ff <0f> 0b eb b9 8d 6b ff 89 ee 09 de bf ff ff ff ff e8 18 51 97 ff 09 RSP: 0018:ffffc90001ebfb08 EFLAGS: 00010293 RAX: ffffffff81e16083 RBX: ffff888019038040 RCX: ffff88801e86b780 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000040 RBP: 1ffff1100b2f8a80 R08: ffffffff81e15fce R09: ffffed100b2f8a82 R10: ffffed100b2f8a82 R11: 0000000000000000 R12: 0000000000000000 R13: dffffc0000000000 R14: ffff8880597c5400 R15: ffff888019038000 FS: 00007f8dcd89c700(0000) GS:ffff8880b9c00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000055e9a054e160 CR3: 000000001dfb8000 CR4: 00000000001506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: io_uring_clean_tctx+0x1b7/0x210 fs/io_uring.c:8802 __io_uring_files_cancel+0x13c/0x170 fs/io_uring.c:8820 io_uring_files_cancel include/linux/io_uring.h:47 [inline] do_exit+0x258/0x2340 kernel/exit.c:780 do_group_exit+0x168/0x2d0 kernel/exit.c:922 get_signal+0x1734/0x1ef0 kernel/signal.c:2773 arch_do_signal_or_restart+0x3c/0x610 arch/x86/kernel/signal.c:811 handle_signal_work kernel/entry/common.c:147 [inline] exit_to_user_mode_loop kernel/entry/common.c:171 [inline] exit_to_user_mode_prepare+0xac/0x1e0 kernel/entry/common.c:208 __syscall_exit_to_user_mode_work kernel/entry/common.c:290 [inline] syscall_exit_to_user_mode+0x48/0x180 kernel/entry/common.c:301 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x465f69 which shouldn't happen, but seems to be possible due to a race on whether or not the io-wq manager sees a fatal signal first, or whether the io-wq workers do. If we race with queueing work and then send a fatal signal to the owning task, and the io-wq worker sees that before the manager sets IO_WQ_BIT_EXIT, then it's possible to have the worker exit and leave work behind. Just turn the WARN_ON_ONCE() into a cancelation condition instead. Reported-by: syzbot+77a738a6bc947bf639ca@syzkaller.appspotmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk> 25 March 2021, 16:16:12 UTC
37df9f3 Lv Yunlong 24 March 2021, 10:37:24 UTC video: hyperv_fb: Fix a double free in hvfb_probe Function hvfb_probe() calls hvfb_getmem(), expecting upon return that info->apertures is either NULL or points to memory that should be freed by framebuffer_release(). But hvfb_getmem() is freeing the memory and leaving the pointer non-NULL, resulting in a double free if an error occurs or later if hvfb_remove() is called. Fix this by removing all kfree(info->apertures) calls in hvfb_getmem(). This will allow framebuffer_release() to free the memory, which follows the pattern of other fbdev drivers. Fixes: 3a6fb6c4255c ("video: hyperv: hyperv_fb: Use physical memory for fb on HyperV Gen 1 VMs.") Signed-off-by: Lv Yunlong <lyl2019@mail.ustc.edu.cn> Reviewed-by: Michael Kelley <mikelley@microsoft.com> Link: https://lore.kernel.org/r/20210324103724.4189-1-lyl2019@mail.ustc.edu.cn Signed-off-by: Wei Liu <wei.liu@kernel.org> 25 March 2021, 13:31:20 UTC
3408be1 Potnuri Bharat Teja 24 March 2021, 19:04:53 UTC RDMA/cxgb4: Fix adapter LE hash errors while destroying ipv6 listening server Not setting the ipv6 bit while destroying ipv6 listening servers may result in potential fatal adapter errors due to lookup engine memory hash errors. Therefore always set ipv6 field while destroying ipv6 listening servers. Fixes: 830662f6f032 ("RDMA/cxgb4: Add support for active and passive open connection with IPv6 address") Link: https://lore.kernel.org/r/20210324190453.8171-1-bharat@chelsio.com Signed-off-by: Potnuri Bharat Teja <bharat@chelsio.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> 25 March 2021, 13:25:58 UTC
back to top