https://github.com/torvalds/linux
Revision e52542443aa9be15439e9879baf6d41b290e94db authored by Russell King on 18 November 2005, 17:57:55 UTC, committed by Jeff Garzik on 18 November 2005, 18:10:30 UTC
The smc91x driver relies upon register bank 2 being selected whenever
the interrupt handler is called.  This isn't always so, especially if
we have a link change event during PHY configuration.

This results in register bank 0 being selected when the interrupt
handler is called, causing the wrong registers to be read for the
IRQ mask and status.  In turn, this causes us to spin with a
permanently asserted IRQ.

The patch ensures that smc_phy_configure always exits with register
bank 2 selected.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
1 parent 5d0571d
History
Tip revision: e52542443aa9be15439e9879baf6d41b290e94db authored by Russell King on 18 November 2005, 17:57:55 UTC
[PATCH] smc91x: fix bank mismatch
Tip revision: e525424
File Mode Size
mpu401
opl3
opl4
vx
Kconfig -rw-r--r-- 2.6 KB
Makefile -rw-r--r-- 457 bytes
dummy.c -rw-r--r-- 18.7 KB
mtpav.c -rw-r--r-- 19.3 KB
serial-u16550.c -rw-r--r-- 29.8 KB
virmidi.c -rw-r--r-- 4.9 KB

back to top