Revision e53e0c8029b75408be691e265282d3613b38056d authored by Thorsten Becker on 19 August 2007, 23:54:46 UTC, committed by Thorsten Becker on 19 August 2007, 23:54:46 UTC
- added coor=2 option (for full citcom) to assign finer radial node spacing to top and lower layers of shell. The coor_refine=0.1,0.15,0.1,0.2 parameter specifies the radius fraction of the bottom layer [0], the fraction of the nodes in this layer [1], the top layer fraction [2], and the top layer node fraction [3]. I.e. the defaults will put 15% of all nz nodes into the 10% lower layer, 20% in the top 10% upper layer, and the rest in between. - renamed gzipped output option ascii-gz - built in restart facilities for temperature and tracers when using gzdir I/O - added a composition viscosity function, CDEPV, based on two tracer flavors - for this to work, I had to move viscosity_input() *behind* tic_input() and tracer_input() in instructions - added tracer_enriched option. If tracer = on and tracer_enriched = on, will reader Q0_enriched and vary the element heat production between Q0 for C = 0 and Q0_enriched for C = 1. I.e. this only works if C varies between 0 and 1. - added an experimental option to write to a single VTK file (note caveats!) if ascii-gz is activated gzdir_vtkio = 2, will try to write VTK straight (experimental) the VTK output is of the "legacy", serial type, and requires that all processors see the same filesystem. This will likely lead to a bottleneck for larg CPU computations as each processor has to wait til the previous is done.
1 parent 5cbae2e
File | Mode | Size |
---|---|---|
Mayavi2 | ||
OpenDXMacro | ||
samples | ||
Makefile.am | -rw-r--r-- | 4.3 KB |
autocombine.py | -rwxr-xr-x | 3.9 KB |
batchcombine.py | -rwxr-xr-x | 4.7 KB |
batchsurf.py | -rwxr-xr-x | 3.1 KB |
citcoms_datadir | -rwxr-xr-x | 421 bytes |
combine.py | -rwxr-xr-x | 4.4 KB |
combinesurf.py | -rwxr-xr-x | 4.6 KB |
dxgeneral.py | -rwxr-xr-x | 3.6 KB |
dxgeneralsurf.sh | -rwxr-xr-x | 1.8 KB |
estimate_size.py | -rwxr-xr-x | 8.8 KB |
getcoord.sh | -rwxr-xr-x | 1.7 KB |
getlog.sh | -rwxr-xr-x | 1.3 KB |
getsurf.sh | -rwxr-xr-x | 1.8 KB |
h5tocap.c | -rw-r--r-- | 5.8 KB |
h5tocap.py | -rwxr-xr-x | 3.6 KB |
h5tovelo.c | -rw-r--r-- | 5.2 KB |
h5util.c | -rw-r--r-- | 7.9 KB |
h5util.h | -rw-r--r-- | 1.4 KB |
mayavi2_citcoms_display.py | -rwxr-xr-x | 4.1 KB |
miff2avi | -rwxr-xr-x | 2.4 KB |
miff2mpg | -rwxr-xr-x | 2.3 KB |
parser.py | -rwxr-xr-x | 7.9 KB |
pasteCitcomData.py | -rwxr-xr-x | 4.0 KB |
plot_annulus.py | -rwxr-xr-x | 7.4 KB |
plot_layer.py | -rwxr-xr-x | 4.8 KB |
visFull.cfg | -rw-r--r-- | 4.4 KB |
visFull.net.in | -rw-r--r-- | 37.4 KB |
visRegional.cfg | -rw-r--r-- | 4.2 KB |
visRegional.net.in | -rw-r--r-- | 33.9 KB |
visRegionalSurface.cfg | -rw-r--r-- | 8.0 KB |
visRegionalSurface.net.in | -rw-r--r-- | 90.9 KB |
zslice.py | -rwxr-xr-x | 3.4 KB |
Computing file changes ...