Revision e6158b4a5647624ceb90074bfcc248ea3152c906 authored by Lothar Wassmann on 12 October 2005, 18:58:11 UTC, committed by Russell King on 12 October 2005, 18:58:11 UTC
Patch from Lothar Wassmann The function serial_pxa_set_termios() is calling uart_update_timeout() with the baud rate divisor as third parameter, while uart_update_timeout() expects the baud rate in this place. This results in a bogus port->timeout which is proportional to the baud rate. Signed-off-by: Lothar Wassmann <LW@KARO-electronics.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
1 parent 6ec5e7f
pgtable-3level.h
/*
* Copyright 2003 PathScale Inc
* Derived from include/asm-i386/pgtable.h
* Licensed under the GPL
*/
#ifndef __UM_PGTABLE_3LEVEL_H
#define __UM_PGTABLE_3LEVEL_H
#include <asm-generic/pgtable-nopud.h>
/* PGDIR_SHIFT determines what a third-level page table entry can map */
#define PGDIR_SHIFT 30
#define PGDIR_SIZE (1UL << PGDIR_SHIFT)
#define PGDIR_MASK (~(PGDIR_SIZE-1))
/* PMD_SHIFT determines the size of the area a second-level page table can
* map
*/
#define PMD_SHIFT 21
#define PMD_SIZE (1UL << PMD_SHIFT)
#define PMD_MASK (~(PMD_SIZE-1))
/*
* entries per page directory level
*/
#define PTRS_PER_PTE 512
#define PTRS_PER_PMD 512
#define USER_PTRS_PER_PGD ((TASK_SIZE + (PGDIR_SIZE - 1)) / PGDIR_SIZE)
#define PTRS_PER_PGD 512
#define FIRST_USER_ADDRESS 0
#define pte_ERROR(e) \
printk("%s:%d: bad pte %p(%016lx).\n", __FILE__, __LINE__, &(e), \
pte_val(e))
#define pmd_ERROR(e) \
printk("%s:%d: bad pmd %p(%016lx).\n", __FILE__, __LINE__, &(e), \
pmd_val(e))
#define pgd_ERROR(e) \
printk("%s:%d: bad pgd %p(%016lx).\n", __FILE__, __LINE__, &(e), \
pgd_val(e))
#define pud_none(x) (!(pud_val(x) & ~_PAGE_NEWPAGE))
#define pud_bad(x) ((pud_val(x) & (~PAGE_MASK & ~_PAGE_USER)) != _KERNPG_TABLE)
#define pud_present(x) (pud_val(x) & _PAGE_PRESENT)
#define pud_populate(mm, pud, pmd) \
set_pud(pud, __pud(_PAGE_TABLE + __pa(pmd)))
#define set_pud(pudptr, pudval) set_64bit((phys_t *) (pudptr), pud_val(pudval))
static inline int pgd_newpage(pgd_t pgd)
{
return(pgd_val(pgd) & _PAGE_NEWPAGE);
}
static inline void pgd_mkuptodate(pgd_t pgd) { pgd_val(pgd) &= ~_PAGE_NEWPAGE; }
#define set_pmd(pmdptr, pmdval) set_64bit((phys_t *) (pmdptr), pmd_val(pmdval))
static inline pmd_t *pmd_alloc_one(struct mm_struct *mm, unsigned long address)
{
pmd_t *pmd = (pmd_t *) __get_free_page(GFP_KERNEL);
if(pmd)
memset(pmd, 0, PAGE_SIZE);
return pmd;
}
extern inline void pud_clear (pud_t *pud)
{
set_pud(pud, __pud(0));
}
#define pud_page(pud) \
((struct page *) __va(pud_val(pud) & PAGE_MASK))
/* Find an entry in the second-level page table.. */
#define pmd_offset(pud, address) ((pmd_t *) pud_page(*(pud)) + \
pmd_index(address))
static inline unsigned long pte_pfn(pte_t pte)
{
return phys_to_pfn(pte_val(pte));
}
static inline pte_t pfn_pte(pfn_t page_nr, pgprot_t pgprot)
{
pte_t pte;
phys_t phys = pfn_to_phys(page_nr);
pte_set_val(pte, phys, pgprot);
return pte;
}
static inline pmd_t pfn_pmd(pfn_t page_nr, pgprot_t pgprot)
{
return __pmd((page_nr << PAGE_SHIFT) | pgprot_val(pgprot));
}
/*
* Bits 0 through 3 are taken in the low part of the pte,
* put the 32 bits of offset into the high part.
*/
#define PTE_FILE_MAX_BITS 32
#ifdef CONFIG_64BIT
#define pte_to_pgoff(p) ((p).pte >> 32)
#define pgoff_to_pte(off) ((pte_t) { ((off) << 32) | _PAGE_FILE })
#else
#define pte_to_pgoff(pte) ((pte).pte_high)
#define pgoff_to_pte(off) ((pte_t) { _PAGE_FILE, (off) })
#endif
#endif
/*
* Overrides for Emacs so that we follow Linus's tabbing style.
* Emacs will notice this stuff at the end of the file and automatically
* adjust the settings for this buffer only. This must remain at the end
* of the file.
* ---------------------------------------------------------------------------
* Local variables:
* c-file-style: "linux"
* End:
*/
![swh spinner](/static/img/swh-spinner.gif)
Computing file changes ...