Revision e6158b4a5647624ceb90074bfcc248ea3152c906 authored by Lothar Wassmann on 12 October 2005, 18:58:11 UTC, committed by Russell King on 12 October 2005, 18:58:11 UTC
Patch from Lothar Wassmann The function serial_pxa_set_termios() is calling uart_update_timeout() with the baud rate divisor as third parameter, while uart_update_timeout() expects the baud rate in this place. This results in a bogus port->timeout which is proportional to the baud rate. Signed-off-by: Lothar Wassmann <LW@KARO-electronics.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
1 parent 6ec5e7f
ad1816a.h
#ifndef __SOUND_AD1816A_H
#define __SOUND_AD1816A_H
/*
ad1816a.h - definitions for ADI SoundPort AD1816A chip.
Copyright (C) 1999-2000 by Massimo Piccioni <dafastidio@libero.it>
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include "control.h"
#include "pcm.h"
#include "timer.h"
#define AD1816A_REG(r) (chip->port + r)
#define AD1816A_CHIP_STATUS 0x00
#define AD1816A_INDIR_ADDR 0x00
#define AD1816A_INTERRUPT_STATUS 0x01
#define AD1816A_INDIR_DATA_LOW 0x02
#define AD1816A_INDIR_DATA_HIGH 0x03
#define AD1816A_PIO_DEBUG 0x04
#define AD1816A_PIO_STATUS 0x05
#define AD1816A_PIO_DATA 0x06
#define AD1816A_RESERVED_7 0x07
#define AD1816A_PLAYBACK_CONFIG 0x08
#define AD1816A_CAPTURE_CONFIG 0x09
#define AD1816A_RESERVED_10 0x0a
#define AD1816A_RESERVED_11 0x0b
#define AD1816A_JOYSTICK_RAW_DATA 0x0c
#define AD1816A_JOYSTICK_CTRL 0x0d
#define AD1816A_JOY_POS_DATA_LOW 0x0e
#define AD1816A_JOY_POS_DATA_HIGH 0x0f
#define AD1816A_LOW_BYTE_TMP 0x00
#define AD1816A_INTERRUPT_ENABLE 0x01
#define AD1816A_EXTERNAL_CTRL 0x01
#define AD1816A_PLAYBACK_SAMPLE_RATE 0x02
#define AD1816A_CAPTURE_SAMPLE_RATE 0x03
#define AD1816A_VOICE_ATT 0x04
#define AD1816A_FM_ATT 0x05
#define AD1816A_I2S_1_ATT 0x06
#define AD1816A_I2S_0_ATT 0x07
#define AD1816A_PLAYBACK_BASE_COUNT 0x08
#define AD1816A_PLAYBACK_CURR_COUNT 0x09
#define AD1816A_CAPTURE_BASE_COUNT 0x0a
#define AD1816A_CAPTURE_CURR_COUNT 0x0b
#define AD1816A_TIMER_BASE_COUNT 0x0c
#define AD1816A_TIMER_CURR_COUNT 0x0d
#define AD1816A_MASTER_ATT 0x0e
#define AD1816A_CD_GAIN_ATT 0x0f
#define AD1816A_SYNTH_GAIN_ATT 0x10
#define AD1816A_VID_GAIN_ATT 0x11
#define AD1816A_LINE_GAIN_ATT 0x12
#define AD1816A_MIC_GAIN_ATT 0x13
#define AD1816A_PHONE_IN_GAIN_ATT 0x13
#define AD1816A_ADC_SOURCE_SEL 0x14
#define AD1816A_ADC_PGA 0x14
#define AD1816A_CHIP_CONFIG 0x20
#define AD1816A_DSP_CONFIG 0x21
#define AD1816A_FM_SAMPLE_RATE 0x22
#define AD1816A_I2S_1_SAMPLE_RATE 0x23
#define AD1816A_I2S_0_SAMPLE_RATE 0x24
#define AD1816A_RESERVED_37 0x25
#define AD1816A_PROGRAM_CLOCK_RATE 0x26
#define AD1816A_3D_PHAT_CTRL 0x27
#define AD1816A_PHONE_OUT_ATT 0x27
#define AD1816A_RESERVED_40 0x28
#define AD1816A_HW_VOL_BUT 0x29
#define AD1816A_DSP_MAILBOX_0 0x2a
#define AD1816A_DSP_MAILBOX_1 0x2b
#define AD1816A_POWERDOWN_CTRL 0x2c
#define AD1816A_TIMER_CTRL 0x2c
#define AD1816A_VERSION_ID 0x2d
#define AD1816A_RESERVED_46 0x2e
#define AD1816A_READY 0x80
#define AD1816A_PLAYBACK_IRQ_PENDING 0x80
#define AD1816A_CAPTURE_IRQ_PENDING 0x40
#define AD1816A_TIMER_IRQ_PENDING 0x20
#define AD1816A_PLAYBACK_ENABLE 0x01
#define AD1816A_PLAYBACK_PIO 0x02
#define AD1816A_CAPTURE_ENABLE 0x01
#define AD1816A_CAPTURE_PIO 0x02
#define AD1816A_FMT_LINEAR_8 0x00
#define AD1816A_FMT_ULAW_8 0x08
#define AD1816A_FMT_LINEAR_16_LIT 0x10
#define AD1816A_FMT_ALAW_8 0x18
#define AD1816A_FMT_LINEAR_16_BIG 0x30
#define AD1816A_FMT_ALL 0x38
#define AD1816A_FMT_STEREO 0x04
#define AD1816A_PLAYBACK_IRQ_ENABLE 0x8000
#define AD1816A_CAPTURE_IRQ_ENABLE 0x4000
#define AD1816A_TIMER_IRQ_ENABLE 0x2000
#define AD1816A_TIMER_ENABLE 0x0080
#define AD1816A_SRC_LINE 0x00
#define AD1816A_SRC_OUT 0x10
#define AD1816A_SRC_CD 0x20
#define AD1816A_SRC_SYNTH 0x30
#define AD1816A_SRC_VIDEO 0x40
#define AD1816A_SRC_MIC 0x50
#define AD1816A_SRC_MONO 0x50
#define AD1816A_SRC_PHONE_IN 0x60
#define AD1816A_SRC_MASK 0x70
#define AD1816A_CAPTURE_NOT_EQUAL 0x1000
#define AD1816A_WSS_ENABLE 0x8000
typedef struct _snd_ad1816a ad1816a_t;
struct _snd_ad1816a {
unsigned long port;
struct resource *res_port;
int irq;
int dma1;
int dma2;
unsigned short hardware;
unsigned short version;
spinlock_t lock;
unsigned short mode;
unsigned int clock_freq;
snd_card_t *card;
snd_pcm_t *pcm;
snd_pcm_substream_t *playback_substream;
snd_pcm_substream_t *capture_substream;
unsigned int p_dma_size;
unsigned int c_dma_size;
snd_timer_t *timer;
};
#define AD1816A_HW_AUTO 0
#define AD1816A_HW_AD1816A 1
#define AD1816A_HW_AD1815 2
#define AD1816A_HW_AD18MAX10 3
#define AD1816A_MODE_PLAYBACK 0x01
#define AD1816A_MODE_CAPTURE 0x02
#define AD1816A_MODE_TIMER 0x04
#define AD1816A_MODE_OPEN (AD1816A_MODE_PLAYBACK | \
AD1816A_MODE_CAPTURE | \
AD1816A_MODE_TIMER)
extern int snd_ad1816a_create(snd_card_t *card, unsigned long port,
int irq, int dma1, int dma2,
ad1816a_t **chip);
extern int snd_ad1816a_pcm(ad1816a_t *chip, int device, snd_pcm_t **rpcm);
extern int snd_ad1816a_mixer(ad1816a_t *chip);
#endif /* __SOUND_AD1816A_H */
![swh spinner](/static/img/swh-spinner.gif)
Computing file changes ...