| e6158b4 | Lothar Wassmann | 12 October 2005, 18:58:11 UTC | [ARM] 3002/1: Wrong parameter to uart_update_timeout() in drivers/serial/pxa.c Patch from Lothar Wassmann The function serial_pxa_set_termios() is calling uart_update_timeout() with the baud rate divisor as third parameter, while uart_update_timeout() expects the baud rate in this place. This results in a bogus port->timeout which is proportional to the baud rate. Signed-off-by: Lothar Wassmann <LW@KARO-electronics.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> | 12 October 2005, 18:58:11 UTC |
| 6ec5e7f | Ben Dooks | 12 October 2005, 18:58:10 UTC | [ARM] 2978/1: nwfpe - clean up sparse errors Patch from Ben Dooks The NWFPE is producing a number of errors from sparse due to not defining a number of functions in the header files. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> | 12 October 2005, 18:58:10 UTC |
| 737d0bb | George G. Davis | 12 October 2005, 18:58:10 UTC | [ARM] 2969/1: miscellaneous whitespace cleanup Patch from George G. Davis Fix leading, trailing and other miscellaneous whitespace issues in arch/arm/kernel/alignment.c. Signed-off-by: George G. Davis <gdavis@mvista.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> | 12 October 2005, 18:58:10 UTC |
| cd26f45 | George G. Davis | 12 October 2005, 18:58:09 UTC | [ARM] 2970/1: Use -mtune=arm1136j-s when building for CPU_V6 targets Patch from George G. Davis When building for CPU_V6 targets, we should use -mtune=arm1136j-s rather than -mtune=strongarm but fall back to the later in case someone is using an older toolchain (although they should really upgrade instead). Signed-off-by: George G. Davis <gdavis@mvista.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> | 12 October 2005, 18:58:09 UTC |
| ceca629 | Sascha Hauer | 12 October 2005, 18:58:08 UTC | [ARM] 2971/1: i.MX uart handle rts irq Patch from Sascha Hauer handle rts interrupt Signed-off-by: Giancarlo Formicuccia <giancarlo.formicuccia@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> | 12 October 2005, 18:58:08 UTC |
| 9f693d7 | Ben Dooks | 12 October 2005, 18:58:07 UTC | [ARM] 2979/2: S3C2410 - add static to non-exported machine items Patch from Ben Dooks Do not export items that are not needed by symbol name elsewhere Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> | 12 October 2005, 18:58:07 UTC |
| a7b1bbb | Ben Dooks | 12 October 2005, 18:58:07 UTC | [ARM] 2977/1: armksyms.c - make items in export table static Patch from Ben Dooks The items in the export table do not need to be exported elsehwere, so quash the sparse warning by making the symbol for the table entry static. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> | 12 October 2005, 18:58:07 UTC |
| 17efa64 | Ben Dooks | 12 October 2005, 18:58:06 UTC | [ARM] 2976/1: S3C2410: add static to functions in serial driver Patch from Ben Dooks The s3c2410 serial driver is missing static declerations on several functions that are not exported, and have no need of being exported outside the driver Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> | 12 October 2005, 18:58:06 UTC |
| 0eea3c0 | Ben Dooks | 12 October 2005, 18:58:05 UTC | [ARM] 2975/1: S3C2410: time.c missing include of cpu.h Patch from Ben Dooks arch/arm/mach-s3c2410/time.c is missing include of cpu.h, causing the declaration of the timer struct (s3c24xx_timer) to be flagged as missing the declaration. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> | 12 October 2005, 18:58:05 UTC |
| 60ac133 | Nicolas Pitre | 12 October 2005, 18:51:24 UTC | [ARM] 2974/1: fix ARM710 swi bug workaround Patch from Nicolas Pitre Either no one is using an ARM710 with recent kernels, or all ARM710s still in use are not afflicted by this swi bug. Nevertheless, the code to work around the ARM710 swi bug is itself currently buggy since it uses r8 as a pointer to S_PC while in fact it holds the spsr content these days. Fix that, and simplify the code as well. Signed-off-by: Nicolas Pitre <nico@cam.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> | 12 October 2005, 18:51:24 UTC |
| da64c6e | Linus Torvalds | 11 October 2005, 23:39:24 UTC | Merge master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6 | 11 October 2005, 23:39:24 UTC |
| b1b510a | David S. Miller | 11 October 2005, 22:45:16 UTC | [SPARC64]: Fix net booting on Ultra5 We were not doing alignment properly when remapping the kernel image. What we want is a 4MB aligned physical address to map at KERNBASE. Mistakedly we were 4MB aligning the virtual address where the kernel initially sits, that's wrong. Instead, we should PAGE align the virtual address, then 4MB align the physical address result the prom gives to us. Signed-off-by: David S. Miller <davem@davemloft.net> | 11 October 2005, 22:45:16 UTC |
| f5154a9 | Hugh Dickins | 11 October 2005, 18:16:26 UTC | [PATCH] Don't map the same page too much Refuse to install a page into a mapping if the mapping count is already ridiculously large. You probably cannot trigger this on 32-bit architectures, but on a 64-bit setup we should protect against it. Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org> | 11 October 2005, 19:03:47 UTC |
| 9149ccf | Peter Bergner | 11 October 2005, 16:28:24 UTC | [PATCH] ppc64: Add R_PPC64_TOC16 module reloc Newer gcc's are generating this relocation, so the module loader needs to handle it. Signed-off-by: Peter Bergner <bergner@vnet.ibm.com> Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org> | 11 October 2005, 16:46:54 UTC |
| d308979 | Michael Krufky | 11 October 2005, 16:28:24 UTC | [PATCH] V4L: Enable s-video input on DViCO FusionHDTV5 Lite * bttv-cards.c: - Enable S-Video input on DViCO FusionHDTV5 Lite Signed-off-by: Michael Krufky <mkrufky@m1k.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org> | 11 October 2005, 16:46:54 UTC |
| 9de11aa | Hirokazu Takata | 11 October 2005, 15:29:09 UTC | [PATCH] m32r: trap handler code for illegal traps This patch prevents illegal traps from causing m32r kernel's infinite loop execution. Signed-off-by: Naoto Sugai <sugai@isl.melco.co.jp> Signed-off-by: Hirokazu Takata <takata@linux-m32r.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org> | 11 October 2005, 16:46:54 UTC |
| 6de5051 | akpm@osdl.org | 11 October 2005, 15:29:08 UTC | [PATCH] binfmt_elf bss padding fix Nir Tzachar <tzachar@cs.bgu.ac.il> points out that if an ELF file specifies a zero-length bss at a whacky address, we cannot load that binary because padzero() tries to zero out the end of the page at the whacky address, and that may not be writeable. See also http://bugzilla.kernel.org/show_bug.cgi?id=5411 So teach load_elf_binary() to skip the bss settng altogether if the elf file has a zero-length bss segment. Cc: Roland McGrath <roland@redhat.com> Cc: Daniel Jacobowitz <dan@debian.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org> | 11 October 2005, 16:46:54 UTC |
| a0c111c | Paolo Galtieri | 11 October 2005, 15:29:07 UTC | [PATCH] ppc highmem fix I've noticed that the calculations for seg_size and nr_segs in __dma_sync_page_highmem() (arch/ppc/kernel/dma-mapping.c) are wrong. The incorrect calculations can result in either an oops or a panic when running fsck depending on the size of the partition. The problem with the seg_size calculation is that it can result in a negative number if size is offset > size. The problem with the nr_segs caculation is returns the wrong number of segments, e.g. it returns 1 when size is 200 and offset is 4095, when it should return 2 or more. Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org> | 11 October 2005, 16:46:54 UTC |
| 1bef400 | Suzuki | 11 October 2005, 15:29:06 UTC | [PATCH] madvise: Avoid returning error code -EBADF for anonymous mappings Revert this recent correctness change: Douglas Crosher <dcrosher@scieneer.com> reported that it broke an existing application, and that madvise() works without error on anonymous mappings on Solaris. This means that madvise() will remain non-standards-compliant: we should return -EBADF for all requests against non-file-backed vma's, but Linux only does this for MADV_WILLNEED requests. Signed-off-by: Suzuki K P <suzuki@in.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org> | 11 October 2005, 16:46:54 UTC |
| 22c1ea4 | Andreas Gruenbacher | 11 October 2005, 15:29:05 UTC | [PATCH] nfsacl: Solaris VxFS compatibility fix Here is a compatibility fix between Linux and Solaris when used with VxFS filesystems: Solaris usually accepts acl entries in any order, but with VxFS it replies with NFSERR_INVAL when it sees a four-entry acl that is not in canonical form. It may also fail with other non-canonical acls -- I can't tell, because that case never triggers: We only send non-canonical acls when we fake up an ACL_MASK entry. Instead of adding fake ACL_MASK entries at the end, inserting them in the correct position makes Solaris+VxFS happy. The Linux client and server sides don't care about entry order. The three-entry-acl special case in which we need a fake ACL_MASK entry was handled in xdr_nfsace_encode. The patch moves this into nfsacl_encode. Signed-off-by: Andreas Gruenbacher <agruen@suse.de> Acked-by: Trond Myklebust <trond.myklebust@fys.uio.no> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org> | 11 October 2005, 16:46:54 UTC |
| 19cba8a | Latchesar Ionkov | 11 October 2005, 15:29:03 UTC | [PATCH] v9fs: remove additional buffer allocation from v9fs_file_read and v9fs_file_write v9fs_file_read and v9fs_file_write use kmalloc to allocate buffers as big as the data buffer received as parameter. kmalloc cannot be used to allocate buffers bigger than 128K, so reading/writing data in chunks bigger than 128k fails. This patch reorganizes v9fs_file_read and v9fs_file_write to allocate only buffers as big as the maximum data that can be sent in one 9P message. Signed-off-by: Latchesar Ionkov <lucho@ionkov.net> Cc: Eric Van Hensbergen <ericvh@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org> | 11 October 2005, 16:46:54 UTC |
| ad6ce87 | Abhay Salunke | 11 October 2005, 15:29:02 UTC | [PATCH] dell_rbu: changes in packet update mechanism In the current dell_rbu code ver 2.0 the packet update mechanism makes the user app dump every individual packet in to the driver. This adds in efficiency as every packet update makes the /sys/class/firmware/dell_rbu/loading and data files to disappear and reappear again. Thus the user app needs to wait for the files to reappear to dump another packet. This slows down the packet update tremendously in case of large number of packets. I am submitting a new patch for dell_rbu which will change the way we do packet updates; In the new method the user app will create a new single file which has already packetized the rbu image and all the packets are now staged in this file. This driver also creates a new entry in /sys/devices/platform/dell_rbu/packet_size ; the user needs to echo the packet size here before downloading the packet file. The user should do the following: create one single file which has all the packets stacked together. echo the packet size in to /sys/devices/platform/dell_rbu/packet_size. echo 1 > /sys/class/firmware/dell_rbu/loading cat the packetfile > /sys/class/firmware/dell_rbu/data echo 0 > /sys/class/firmware/dell_rbu/loading The driver takes the file which came through /sys/class/firmware/dell_rbu/data and takes chunks of paket_size data from it and place in contiguous memory. This makes packet update process very efficient and fast. As all the packet update happens in one single operation. The user can still read back the downloaded file from /sys/devices/platform/dell_rbu/data. Signed-off-by: Abhay Salunke <abhay_salunke@dell.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org> | 11 October 2005, 16:46:53 UTC |
| e4314bf | Anton Blanchard | 11 October 2005, 15:29:00 UTC | [PATCH] ppc64: Fix PCI hotplug pSeries_irq_bus_setup is marked __devinit but references s7a_workaround which is marked __initdata. Depending on who got the memory for s7a_workaround (and if the value was now positive), it was possible for PCI hotplugged devices to have 3 subtracted from their interrupt number. This would happen randomly and caused me much confusion :) Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org> | 11 October 2005, 16:46:53 UTC |
| e5945b4 | Cornelia Huck | 11 October 2005, 15:28:59 UTC | [PATCH] s390: ccw device reconnect oops. Search for a disconnect ccw_device on the ccw bus rather than on the css bus (was a typo in patch I did for the klist conversion). A cast to an embedding ccw_device from an embedded device in a struct subchannel will lead us to oopses. Signed-off-by: Cornelia Huck <cohuck@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org> | 11 October 2005, 16:46:53 UTC |
| 08eb8f1 | David S. Miller | 11 October 2005, 04:02:26 UTC | [SPARC32]: Revert IOMAP change eb98129eec7fa605f0407dfd92d40ee8ddf5cd9a Breakage noted by Al Viro. It breaks non-PCI builds, it's probably better to have a more direct implementation on sparc32, and which driver actually needs this is still questionable. We can resolve this in 2.6.15 Signed-off-by: David S. Miller <davem@davemloft.net> | 11 October 2005, 04:02:26 UTC |
| b8df110 | David S. Miller | 11 October 2005, 03:43:22 UTC | [SPARC64]: Fix oops on runlevel change with serial console. Incorrect uart_write_wakeup() calls cause reference to a NULL tty pointer in sunsab and sunzilog serial drivers. Signed-off-by: David S. Miller <davem@davemloft.net> | 11 October 2005, 03:43:22 UTC |
| 907a426 | Linus Torvalds | 11 October 2005, 01:19:19 UTC | Linux v2.6.14-rc4 | 11 October 2005, 01:19:19 UTC |
| 3c92c2b | Andi Kleen | 10 October 2005, 23:28:33 UTC | [PATCH] i386: Don't discard upper 32bits of HWCR on K8 Need to use long long, not long when RMWing a MSR. I think it's harmless right now, but still should be better fixed if AMD adds any bits in the upper 32bit of HWCR. Bug was introduced with the TLB flush filter fix for i386 Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org> | 10 October 2005, 23:34:09 UTC |
| 421c7ce | Andi Kleen | 10 October 2005, 20:32:45 UTC | [PATCH] x86_64: Allocate cpu local data for all possible CPUs CPU hotplug fills up the possible map to NR_CPUs, but it did that after setting up per CPU data. This lead to CPU data not getting allocated for all possible CPUs, which lead to various side effects. Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org> | 10 October 2005, 23:33:25 UTC |
| af74c3a | Linus Torvalds | 10 October 2005, 23:32:32 UTC | Merge master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6 | 10 October 2005, 23:32:32 UTC |
| d7dd8a7 | Linus Torvalds | 10 October 2005, 23:31:30 UTC | Use the new "kill_proc_info_as_uid()" for USB disconnect too All the same issues - we can't just save the pointer to the thread, we must save the pid/uid/euid combination. Signed-off-by: Linus Torvalds <torvalds@osdl.org> | 10 October 2005, 23:31:30 UTC |
| 4611383 | Harald Welte | 10 October 2005, 17:44:29 UTC | [PATCH] Fix signal sending in usbdevio on async URB completion If a process issues an URB from userspace and (starts to) terminate before the URB comes back, we run into the issue described above. This is because the urb saves a pointer to "current" when it is posted to the device, but there's no guarantee that this pointer is still valid afterwards. In fact, there are three separate issues: 1) the pointer to "current" can become invalid, since the task could be completely gone when the URB completion comes back from the device. 2) Even if the saved task pointer is still pointing to a valid task_struct, task_struct->sighand could have gone meanwhile. 3) Even if the process is perfectly fine, permissions may have changed, and we can no longer send it a signal. So what we do instead, is to save the PID and uid's of the process, and introduce a new kill_proc_info_as_uid() function. Signed-off-by: Harald Welte <laforge@gnumonks.org> [ Fixed up types and added symbol exports ] Signed-off-by: Linus Torvalds <torvalds@osdl.org> | 10 October 2005, 23:16:33 UTC |
| 5d8e1b1 | David S. Miller | 10 October 2005, 23:12:13 UTC | [SPARC64]: Fix Ultra5, Ultra60, et al. boot failures. On the boot processor, we need to do the move onto the Linux trap table a little bit differently else we'll take unhandlable faults in the firmware address space. Previously we would do the following: 1) Disable PSTATE_IE in %pstate. 2) Set %tba by hand to sparc64_ttable_tl0 3) Initialize alternate, mmu, and interrupt global trap registers. 4) Call prom_set_traptable() That doesn't work very well actually with the way we boot the kernel VM these days. It worked by luck on many systems because the firmware accesses for the prom_set_traptable() call happened to be loaded into the TLB already, something we cannot assume. So the new scheme is this: 1) Clear PSTATE_IE in %pstate and set %pil to 15 2) Call prom_set_traptable() 3) Initialize alternate, mmu, and interrupt global trap registers. and this works quite well. This sequence has been moved into a callable function in assembler named setup-trap_table(). The idea is that eventually trampoline.S can use this code as well. That isn't possible currently due to some complications, but eventually we should be able to do it. Thanks to Meelis Roos for the Ultra5 boot failure report. Signed-off-by: David S. Miller <davem@davemloft.net> | 10 October 2005, 23:12:13 UTC |
| 094804c | Andi Kleen | 10 October 2005, 23:03:39 UTC | [PATCH] x86_64: Fix change_page_attr cache flushing Noticed by Terence Ripperda Undo wrong change in global_flush_tlb. We need to flush the caches in all cases, not just when pages were reverted. This was a bogus optimization added earlier, but it was wrong. Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org> | 10 October 2005, 23:10:33 UTC |
| f96c3bb | Linus Torvalds | 10 October 2005, 17:39:26 UTC | Merge master.kernel.org:/home/rmk/linux-2.6-ucb | 10 October 2005, 17:39:26 UTC |
| ec384d2 | Linus Torvalds | 10 October 2005, 17:39:14 UTC | Merge master.kernel.org:/home/rmk/linux-2.6-arm | 10 October 2005, 17:39:14 UTC |
| 71e2b2e | Vincent Sanders | 10 October 2005, 17:24:09 UTC | [ARM] 2968/1: defconfig for the ARM Collie platform Patch from Vincent Sanders Add a defconfig for the ARM Collie platform Signed-off-by: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Vincent Sanders <vince@arm.linux.org.uk> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> | 10 October 2005, 17:24:09 UTC |
| 36e5ea6 | Vincent Sanders | 10 October 2005, 17:24:08 UTC | [ARM] 2967/1: defconfig for the ARM Corgi platform Patch from Vincent Sanders Add a defconfig for the ARM Corgi Zarus platform Signed-off-by: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Vincent Sanders <vince@arm.linux.org.uk> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> | 10 October 2005, 17:24:08 UTC |
| b0bdc7b | Vincent Sanders | 10 October 2005, 17:24:07 UTC | [ARM] 2966/1: defconfig for the ARM Poodle platform Patch from Vincent Sanders Add a defconfig for the ARM Poodle Zarus platform Signed-off-by: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Vincent Sanders <vince@arm.linux.org.uk> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> | 10 October 2005, 17:24:07 UTC |
| 86b3248 | Vincent Sanders | 10 October 2005, 17:24:06 UTC | [ARM] 2965/1: defconfig for the ARM Spitz platform Patch from Vincent Sanders Add a defconfig for the ARM Spitz Zarus platform Signed-off-by: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Vincent Sanders <vince@arm.linux.org.uk> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> | 10 October 2005, 17:24:06 UTC |
| 585f545 | Nicolas Pitre | 10 October 2005, 17:22:17 UTC | [ARM] 2956/1: fix the "Fix gcc4 build errors in ucb1x00-core.c" Patch from Nicolas Pitre drivers/mfd/ucb1x00-core.c: In function 'ucb1x00_probe': drivers/mfd/ucb1x00-core.c:482: error: 'ucb1x00_class' undeclared (first use in this function) Signed-off-by: Nicolas Pitre <nico@cam.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> | 10 October 2005, 17:22:17 UTC |
| d347f37 | Markus F.X.J. Oberhumer | 09 October 2005, 16:54:23 UTC | [PATCH] i386: fix stack alignment for signal handlers This fixes the setup of the alignment of the signal frame, so that all signal handlers are run with a properly aligned stack frame. The current code "over-aligns" the stack pointer so that the stack frame is effectively always mis-aligned by 4 bytes. But what we really want is that on function entry ((sp + 4) & 15) == 0, which matches what would happen if the stack were aligned before a "call" instruction. Signed-off-by: Markus F.X.J. Oberhumer <markus@oberhumer.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org> | 10 October 2005, 15:45:06 UTC |
| 867f8b4 | Benjamin Herrenschmidt | 09 October 2005, 00:37:47 UTC | [PATCH] ide: Workaround PM problem The logic in ide_do_request() doesn't guarantee that both drives will be serviced after a call. It may "forget" to service one in some circumstances, including when one of the drive is suspended (it will eventually fail to service the slave when the master is suspended for example). This prevents the wakeup requests that gets queued on wakeup from sleep from beeing serviced in some cases when 2 drives are sharing an IDE bus. The problem is deep enough in the way this code works (and there are probably a few other problematic but rare corner cases) and fixing it would require some major rethinking of the way IDE decides which channel to service. This is not 2.6.14 material. However, in the meantime, Bart has accepted this simple workaround that will fix the crash on wakeup from sleep since this specific corner case is actually hitting users to get into 2.6.14. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org> | 10 October 2005, 15:40:47 UTC |
| 1cc956e | Tom Zanussi | 09 October 2005, 15:41:32 UTC | [PATCH] relayfs: fix bogus param value in call to vmap The third param in this call to vmap shouldn't be GFP_KERNEL, which makes no sense, but rather VM_MAP. Thanks to Al Viro for spotting this. Signed-off-by: Tom Zanussi <zanussi@us.ibm.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org> | 10 October 2005, 15:39:50 UTC |
| eb1b74e | Linus Torvalds | 10 October 2005, 15:38:52 UTC | Merge master.kernel.org:/home/rmk/linux-2.6-arm | 10 October 2005, 15:38:52 UTC |
| 50f72b5 | Jeff Dike | 09 October 2005, 20:11:44 UTC | [PATCH] uml: fix x86_64 with !CONFIG_FRAME_POINTER UML/x86_64 doesn't run when built with frame pointers disabled. There was an implicit frame pointer assumption in the stub segfault handler. With frame pointers disabled, UML dies on handling its first page fault. The container-of part of this is from Paolo Giarrusso <blaisorblade@yahoo.it>. Signed-off-by: Jeff Dike <jdike@addtoit.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org> | 10 October 2005, 15:37:59 UTC |
| 3dd0832 | Rafael J. Wysocki | 09 October 2005, 19:19:40 UTC | [PATCH] x86_64: Set up safe page tables during resume The following patch makes swsusp avoid the possible temporary corruption of page translation tables during resume on x86-64. This is achieved by creating a copy of the relevant page tables that will not be modified by swsusp and can be safely used by it on resume. The problem is that during resume on x86-64 swsusp may temporarily corrupt the page tables used for the direct mapping of RAM. If that happens, a page fault occurs and cannot be handled properly, which leads to the solid hang of the affected system. This leads to the loss of the system's state from before suspend and may result in the loss of data or the corruption of filesystems, so it is a serious issue. Also, it appears to happen quite often (for me, as often as 50% of the time). The problem is related to the fact that (at least) one of the PMD entries used in the direct memory mapping (starting at PAGE_OFFSET) points to a page table the physical address of which is much greater than the physical address of the PMD entry itself. Moreover, unfortunately, the physical address of the page table before suspend (i.e. the one stored in the suspend image) happens to be different to the physical address of the corresponding page table used during resume (i.e. the one that is valid right before swsusp_arch_resume() in arch/x86_64/kernel/suspend_asm.S is executed). Thus while the image is restored, the "offending" PMD entry gets overwritten, so it does not point to the right physical address any more (i.e. there's no page table at the address pointed to by it, because it points to the address the page table has been at during suspend). Consequently, if the PMD entry is used later on, and it _is_ used in the process of copying the image pages, a page fault occurs, but it cannot be handled in the normal way and the system hangs. In principle we can call create_resume_mapping() from swsusp_arch_resume() (ie. from suspend_asm.S), but then the memory allocations in create_resume_mapping(), resume_pud_mapping(), and resume_pmd_mapping() must be made carefully so that we use _only_ NosaveFree pages in them (the other pages are overwritten by the loop in swsusp_arch_resume()). Additionally, we are in atomic context at that time, so we cannot use GFP_KERNEL. Moreover, if one of the allocations fails, we should free all of the allocated pages, so we need to trace them somehow. All of this is done in the appended patch, except that the functions populating the page tables are located in arch/x86_64/kernel/suspend.c rather than in init.c. It may be done in a more elegan way in the future, with the help of some swsusp patches that are in the works now. [AK: move some externs into headers, renamed a function] Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org> | 10 October 2005, 15:36:46 UTC |
| 52a2d3e | Paolo 'Blaisorblade' Giarrusso | 09 October 2005, 19:37:53 UTC | [PATCH] uml: cleanup whitespace for COW driver Fix whitespace - I split this off the previous patch for easier review. Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: Linus Torvalds <torvalds@osdl.org> | 10 October 2005, 15:36:00 UTC |
| 028c0cc | Paolo 'Blaisorblade' Giarrusso | 09 October 2005, 19:37:45 UTC | [PATCH] uml: cleanup byte order macros for COW driver After restoring the existing code, make it work also when included in kernelspace code (which isn't currently the case, but at least this will prevent people from "fixing" it as just happened). Whitespace is fixed in next patch - it cluttered the diff too much. Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: Linus Torvalds <torvalds@osdl.org> | 10 October 2005, 15:36:00 UTC |
| 855ec61 | Paolo 'Blaisorblade' Giarrusso | 09 October 2005, 19:37:35 UTC | [PATCH] uml: restore include breakage, breaking binary format of COW driver Commit 44456d37b59d8e541936ed26d8b6e08d27e88ac1, between 2.6.13-rc3 and -rc4, was a "nice cleanup" which broke something. Revert the offending part. It broke because: a) because this part doesn't fall under the description b) the author didn't know what he was doing here c) the author didn't try to compile the existing code and see that it worked perfectly. d) the author didn't ask us what was happening e) you didn't either, and somebody there should have learned that UML is a bit different. In fact, UML is special in linking to host libc and using its includes. In particular, since host includes always define both __BIG_ENDIAN and __LITTLE_ENDIAN, ntohll() macros started thinking to be in a big-endian world; and on-disk compatibility was broken. Many thanks go to Nix for reporting the problem and correctly diagnosing an endianness problem. Btw, this patch restores the previous code, which worked; but the definitions would be uncorrect if used in kernelspace files. Next patch addresses that. Cc: Nix <nix@esperi.org.uk>, Olaf Hering <olh@suse.de> Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: Linus Torvalds <torvalds@osdl.org> | 10 October 2005, 15:36:00 UTC |
| 54a8a22 | Paolo 'Blaisorblade' Giarrusso | 09 October 2005, 19:37:26 UTC | [PATCH] uml: allow building .s/.i/.lst files from userspace files For files which need to include glibc headers (i.e. userspace files), we specified the correct flags only for .o, not for .s/.lst/.i. Fix this. Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: Linus Torvalds <torvalds@osdl.org> | 10 October 2005, 15:36:00 UTC |
| 9e3d862 | Paolo 'Blaisorblade' Giarrusso | 09 October 2005, 19:37:18 UTC | [PATCH] uml: add mode=skas0 as a synonym of skas0 Too many people were confused by skas0 and tried using "mode=skas0". And after all, they are right - accept this. Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: Linus Torvalds <torvalds@osdl.org> | 10 October 2005, 15:36:00 UTC |
| 5cd10da | Paolo 'Blaisorblade' Giarrusso | 09 October 2005, 19:37:05 UTC | [PATCH] Uml: hide commands when not being verbose Add a missing $(Q) to a "ln" invocation. Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: Linus Torvalds <torvalds@osdl.org> | 10 October 2005, 15:36:00 UTC |
| 220ec02 | Steven Rostedt | 10 October 2005, 15:13:17 UTC | [PATCH] pcmcia: fix task state at pccard thread exit The pccardd thread has a race in it that it can shutdown in the TASK_INTERRUPTIBLE state. Make sure we mark ourselves runnable again as we remove ourselves from the wait queue. Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org> | 10 October 2005, 15:33:27 UTC |
| 7dead80 | Ben Dooks | 10 October 2005, 09:20:07 UTC | [ARM] 2964/1: S3C2410 - serial: add .owner to driver Patch from Ben Dooks Initialise the driver's .owner field so that the device driver can be referenced to the module that owns it Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> | 10 October 2005, 09:20:07 UTC |
| cdfc8f5 | Ben Dooks | 10 October 2005, 09:20:06 UTC | [ARM] 2963/1: S3C2410 - add .owner field to device_driver Patch from Ben Dooks Add initialisation of .owner field so that the device driver can be referenced to the module that owns it. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> | 10 October 2005, 09:20:06 UTC |
| 7c39898 | Richard Purdie | 10 October 2005, 09:20:06 UTC | [ARM] 2962/1: scoop: Allow GPIO pin suspend state to be specified Patch from Richard Purdie Allow the GPIO pin suspend states to be specified for SCOOP devices. This is needed for correct operation on the spitz platform. Signed-off-by: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> | 10 October 2005, 09:20:06 UTC |
| 1036260 | Richard Purdie | 10 October 2005, 09:17:45 UTC | [ARM] 2961/1: corgi: Add missing include Patch from Richard Purdie Add a missing include from corgi.c Signed-off-by: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> | 10 October 2005, 09:17:45 UTC |
| 97b8e00 | Richard Purdie | 10 October 2005, 09:17:44 UTC | [ARM] 2960/1: collie: Add missing scoop call parameters Patch from Richard Purdie Add some missing parameters from the scoop calls on collie. Signed-off-by: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> | 10 October 2005, 09:17:44 UTC |
| 19da83f | George G. Davis | 10 October 2005, 09:17:44 UTC | [ARM] 2959/1: Add test for invalid LDRD/STRD Rd cases in ARM alignment handler Patch from George G. Davis Add test for invalid LDRD/STRD Rd cases in ARM alignment handler and restore SWP printk KERN_ERR. Signed-off-by: Steve Longerbeam <slongerbeam@mvista.com> Signed-off-by: George G. Davis <gdavis@mvista.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> | 10 October 2005, 09:17:44 UTC |
| 79d13b6 | Sascha Hauer | 10 October 2005, 09:17:43 UTC | [ARM] 2958/1: fix definition in imx-regs.h Patch from Sascha Hauer Fix PD7_AF_UART2_DTR definition Signed-off-by: Giancarlo Formicuccia <gformicuccia@atinno.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> | 10 October 2005, 09:17:43 UTC |
| 86371d0 | Sascha Hauer | 10 October 2005, 09:17:42 UTC | [ARM] 2957/1: imx UART Error handling Patch from Sascha Hauer Fix error path in imx_startup. Signed-off-by: Giancarlo Formicuccia <gformicuccia@atinno.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> | 10 October 2005, 09:17:42 UTC |
| ce80cc1 | Russell King | 10 October 2005, 08:48:10 UTC | [ARM] Update mach-types Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> | 10 October 2005, 08:48:10 UTC |
| 2e457ef | Sven Hartge | 09 October 2005, 04:12:04 UTC | [SPARC64]: Fix compile error in irq.c irq.c is missing the inclusion of asm/io.h, which causes readb() and writeb() the be undefined. Signed-off-by: Sven Hartge <hartge@ds9.argh.org> Signed-off-by: David S. Miller <davem@davemloft.net> | 09 October 2005, 04:12:04 UTC |
| dd0fc66 | Al Viro | 07 October 2005, 06:46:04 UTC | [PATCH] gfp flags annotations - part 1 - added typedef unsigned int __nocast gfp_t; - replaced __nocast uses for gfp flags with gfp_t - it gives exactly the same warnings as far as sparse is concerned, doesn't change generated code (from gcc point of view we replaced unsigned int with typedef) and documents what's going on far better. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@osdl.org> | 08 October 2005, 22:00:57 UTC |
| 3b0e77b | Jens Axboe | 07 October 2005, 17:41:34 UTC | [PATCH] scsi_ioctl: only warn for rejected commands We should not be warning about commands that we allow, even if they are unknown. So move the if-root-allow check up a notch. Signed-off-by: Jens Axboe <axboe@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org> | 08 October 2005, 22:00:57 UTC |
| 8aa19ad | Linus Torvalds | 08 October 2005, 21:59:13 UTC | Merge master.kernel.org:/pub/scm/linux/kernel/git/perex/alsa | 08 October 2005, 21:59:13 UTC |
| 58a2c32 | Linus Torvalds | 08 October 2005, 21:58:25 UTC | Merge master.kernel.org:/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog | 08 October 2005, 21:58:25 UTC |
| dcbd39a | Linus Torvalds | 08 October 2005, 21:57:46 UTC | Merge master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 | 08 October 2005, 21:57:46 UTC |
| 582fd48 | Linus Torvalds | 08 October 2005, 21:57:20 UTC | Merge master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6 | 08 October 2005, 21:57:20 UTC |
| 7ab501d | David Howells | 07 October 2005, 15:41:24 UTC | [PATCH] Keys: Possessor permissions should be additive This patch makes the possessor permissions on a key additive with user/group/other permissions on the same key. This permits extra rights to be granted to the possessor of a key without taking away any rights conferred by them owning the key or having common group membership. Signed-Off-By: David Howells <dhowells@redhat.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org> | 08 October 2005, 21:54:48 UTC |
| 468ed2b | David Howells | 07 October 2005, 14:07:38 UTC | [PATCH] Keys: Split key permissions checking into a .c file The attached patch splits key permissions checking out of key-ui.h and moves it into a .c file. It's quite large and called quite a lot, and it's about to get bigger with the addition of LSM support for keys... key_any_permission() is also discarded as it's no longer used. Signed-Off-By: David Howells <dhowells@redhat.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org> | 08 October 2005, 21:53:31 UTC |
| f1a9bad | David Howells | 07 October 2005, 14:04:52 UTC | [PATCH] Keys: Add request-key process documentation The attached patch adds documentation for the process by which request-key works, including how it permits helper processes to gain access to the requestor's keyrings. Signed-Off-By: David Howells <dhowells@redhat.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org> | 08 October 2005, 21:53:31 UTC |
| 74fd92c | David Howells | 07 October 2005, 14:01:09 UTC | [PATCH] key: plug request_key_auth memleak Plug request_key_auth memleak. This can be triggered by unprivileged users, so is local DoS. Signed-off-by: Chris Wright <chrisw@osdl.org> Signed-Off-By: David Howells <dhowells@redhat.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org> | 08 October 2005, 21:53:31 UTC |
| c2059b2 | David Vrabel | 07 October 2005, 13:43:22 UTC | [PATCH] yenta: fix build if YENTA && !CARDBUS (struct pcmcia_socket).tune_bridge only exists if CONFIG_CARDBUS is set but building yenta_socket without CardBus is valid. Signed-off-by: David Vrabel <dvrabel@arcom.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org> | 08 October 2005, 21:53:31 UTC |
| 788e05a | Oleg Nesterov | 07 October 2005, 13:46:19 UTC | [PATCH] fix do_coredump() vs SIGSTOP race Let's suppose we have 2 threads in thread group: A - does coredump B - has pending SIGSTOP thread A thread B do_coredump: get_signal_to_deliver: lock(->sighand) ->signal->flags = SIGNAL_GROUP_EXIT unlock(->sighand) lock(->sighand) signr = dequeue_signal() ->signal->flags |= SIGNAL_STOP_DEQUEUED return SIGSTOP; do_signal_stop: unlock(->sighand) coredump_wait: zap_threads: lock(tasklist_lock) send SIGKILL to B // signal_wake_up() does nothing unlock(tasklist_lock) lock(tasklist_lock) lock(->sighand) re-check sig->flags & SIGNAL_STOP_DEQUEUED, yes set_current_state(TASK_STOPPED); finish_stop: schedule(); // ->state == TASK_STOPPED wait_for_completion(&startup_done) // waits for complete() from B, // ->state == TASK_UNINTERRUPTIBLE We can't wake up 'B' in any way: SIGCONT will be ignored because handle_stop_signal() sees ->signal->flags & SIGNAL_GROUP_EXIT. sys_kill(SIGKILL)->__group_complete_signal() will choose uninterruptible 'A', so it can't help. sys_tkill(B, SIGKILL) will be ignored by specific_send_sig_info() because B already has pending SIGKILL. This scenario is not possbile if 'A' does do_group_exit(), because it sets sig->flags = SIGNAL_GROUP_EXIT and delivers SIGKILL to subthreads atomically, holding both tasklist_lock and sighand->lock. That means that do_signal_stop() will notice !SIGNAL_STOP_DEQUEUED after re-locking ->sighand. And it is not possible to any other thread to re-add SIGNAL_STOP_DEQUEUED later, because dequeue_signal() can only return SIGKILL. I think it is better to change do_coredump() to do sigaddset(SIGKILL) and signal_wake_up() under sighand->lock, but this patch is much simpler. Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru> Signed-off-by: Linus Torvalds <torvalds@osdl.org> | 08 October 2005, 21:53:31 UTC |
| 4f55cd1 | Jean-Denis Boyer | 07 October 2005, 20:44:35 UTC | [ATM]: [br2684] if we free the skb, we should return 0 From: "Jean-Denis Boyer" <jdboyer@mediatrix.com> Signed-off-by: Chas Williams <chas@cmf.nrl.navy.mil> Signed-off-by: David S. Miller <davem@davemloft.net> | 07 October 2005, 20:44:35 UTC |
| ba63993 | David S. Miller | 07 October 2005, 20:30:49 UTC | [SPARC64]: Fix userland FPU state corruption. We need to use stricter memory barriers around the block load and store instructions we use to save and restore the FPU register file. Signed-off-by: David S. Miller <davem@davemloft.net> | 07 October 2005, 20:30:49 UTC |
| d85c355 | Tom 'spot' Callaway | 07 October 2005, 20:05:56 UTC | [SPARC]: Fix p9100 framebuffer in 2.6 The attached patch fixes the p9100 framebuffer so that text is viewable (not black on black, like it was before the patch). The linux logo displays for a very short period of time, then is replaced by a grey box. This leads me to believe that this framebuffer would have problems in X, but since there hasn't been a weitek driver for X in several millennia, this isn't something that I can confirm or deny. But this patch does get color console working on my SPARCbook 3TX. Signed-off-by: Tom 'spot' Callaway <tcallawa@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 07 October 2005, 20:05:56 UTC |
| a25f175 | Clemens Ladisch | 05 October 2005, 11:23:19 UTC | [ALSA] usb-audio: add MIDI quirk for Hercules DJ Console USB generic driver Add a quirk entry for the external MIDI ports of the Windows Edition of the Hercules DJ Console. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> | 07 October 2005, 12:46:42 UTC |
| 9c9565f | Clemens Ladisch | 05 October 2005, 11:02:38 UTC | [ALSA] usb-audio: add another ID for Hercules DJ Console USB generic driver Add a mixer quirk entry for the Hercules DJ Console (Windows Edition) that uses a different USB product ID. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> | 07 October 2005, 12:46:40 UTC |
| 4d060fd | Takashi Iwai | 04 October 2005, 11:50:44 UTC | [ALSA] ali5451 - Don't build non-existing modem PCM ALI5451 driver Don't build the modem PCM if the corresponding codec isn't detected. Signed-off-by: Takashi Iwai <tiwai@suse.de> | 07 October 2005, 12:46:36 UTC |
| b150869 | Takashi Iwai | 04 October 2005, 11:49:32 UTC | [ALSA] emu10k1 - Fix handling of ac97_chip=2 EMU10K1/EMU10K2 driver Fixed the handling of ac97_chip=2 capability type. The error occurs in snd_ac97_mixer(), not in snd_ac97_bus(). Also, release the unnecessary ac97_bus object in the error path. Signed-off-by: Takashi Iwai <tiwai@suse.de> | 07 October 2005, 12:46:34 UTC |
| 315e3bd | Clemens Ladisch | 04 October 2005, 06:42:10 UTC | [ALSA] korg1212: fix typo KORG1212 driver Add a missing comma that made the stateName array one entry too short. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> | 07 October 2005, 12:46:33 UTC |
| f12aa40 | Takashi Iwai | 30 September 2005, 14:56:59 UTC | [ALSA] emu10k1 - Fix loading of SBLive Game board EMU10K1/EMU10K2 driver Fixed the error at loading SBLive Game board (and possible other models). The PCI SSIDs of this board conflicts with SB Live 5.1 Platinum, which has no AC97 chip. Signed-off-by: Takashi Iwai <tiwai@suse.de> | 07 October 2005, 12:46:26 UTC |
| c66186e | Takashi Iwai | 29 September 2005, 11:49:44 UTC | [ALSA] via82xx - dxs_support entry for an ASUS mobo VIA82xx driver Addded a dxs_support entry for an ASUS mobo. Signed-off-by: Takashi Iwai <tiwai@suse.de> | 07 October 2005, 12:46:25 UTC |
| 3545108 | Takashi Iwai | 29 September 2005, 11:25:14 UTC | [ALSA] Fix confliction of capture controls on ALC880 test model HDA Codec driver Fixed the confliction of capture controls on ALC880 'test' model. Signed-off-by: Takashi Iwai <tiwai@suse.de> | 07 October 2005, 12:46:24 UTC |
| 92447f3 | John W. Linville | 29 September 2005, 11:20:45 UTC | [ALSA] fix HD audio ALC882 lfe (un)mute HDA Codec driver Mark the ALC882 'LFE Playback Switch' as an input, like the other playback switch settings. Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> | 07 October 2005, 12:46:19 UTC |
| 1c1fa8b | John W. Linville | 29 September 2005, 11:18:41 UTC | [ALSA] fix alc880_test_mixer typo HDA Codec driver Fix a typo (cut & paste) in the alc880_test_mixer structure. Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> | 07 October 2005, 12:46:18 UTC |
| a7175aa | John W. Linville | 29 September 2005, 11:13:38 UTC | [ALSA] fix HD audio ALC260 mono (un)mute HDA Codec driver The ALC260 'Mono Playback Switch' is marked as an output in patch_realtek.c. It actually does not work unless it is marked as an input. Go figure... This was tested and confirmed on an HP xw4300. Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> | 07 October 2005, 12:46:12 UTC |
| d31cbbf | Clemens Ladisch | 26 September 2005, 07:59:57 UTC | [ALSA] usb-audio: increase max buffer size USB generic driver Increase the maximum PCM buffer size to 1 MB. The USB driver doesn't have any inherent buffer size limit, and big multichannel interfaces may benefit from this. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> | 07 October 2005, 12:46:11 UTC |
| 31ab952 | Clemens Ladisch | 26 September 2005, 06:55:01 UTC | [ALSA] usb-audio: add another ID for the TerraTec PHASE26 USB generic driver There is another revision of the PHASE26 with a different product ID; add a quirk entry for that, too. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> | 07 October 2005, 12:46:06 UTC |
| f542fda | Clemens Ladisch | 20 September 2005, 07:06:36 UTC | [ALSA] usb-audio: add more Yamaha USB MIDI devices USB generic driver Add quirk entries for four unknown Yamaha USB MIDI devices. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> | 07 October 2005, 12:46:03 UTC |
| 1e8bdca | Takashi Iwai | 19 September 2005, 13:21:17 UTC | [ALSA] Add iBook 1.33GHz support PPC PMAC driver Added the support of iBook 1.33GHz. Signed-off-by: Takashi Iwai <tiwai@suse.de> | 07 October 2005, 12:45:54 UTC |
| 5a2a68f | Clemens Ladisch | 19 September 2005, 10:24:00 UTC | [ALSA] usb-audio: add Roland RD-700SX support USB generic driver Add a quirk entry for the Roland RD-700SX. This should work for the RD-300SX, too. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> | 07 October 2005, 12:45:49 UTC |
| db99055 | Takashi Iwai | 16 September 2005, 17:07:52 UTC | [ALSA] via82xx - Add a dxs whitelist entry VIA82xx driver Added a dxs whitelist entry for an ECS mobo. Signed-off-by: Takashi Iwai <tiwai@suse.de> | 07 October 2005, 12:45:48 UTC |
| 90b66e8 | Nicolas Pitre | 16 September 2005, 16:50:53 UTC | [ALSA] clean suspend/resume calls for ac97_bus_type AC97 Codec A single call to the driver suspend/resume method for each device is enough. The level and SUSPEND_*/RESUME_* arguments are deprecated and said to be removed eventually anyway (no other subsystem are using them anymore except platform devices). Signed-off-by: Nicolas Pitre <nico@cam.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> | 07 October 2005, 12:45:46 UTC |
| 72e75de | Nicolas Pitre | 16 September 2005, 16:49:22 UTC | [ALSA] remove redundent assignment to the ac97 device structure AC97 Codec Don't use dev.platform_data to store a reference to the containing ac97_t structure. Such assignment is redundent since we can deduce the ac97_t structure location from the contained device structure. This sets platform_data free for other purposes. Signed-off-by: Nicolas Pitre <nico@cam.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> | 07 October 2005, 12:45:44 UTC |
| 3a91e95 | Nicolas Pitre | 16 September 2005, 16:46:36 UTC | [ALSA] remove bogus match method for ac97_bus AC97 Codec The bus_id is initialized with a generic identifier string which is not really useful for proper driver matching. Let the driver decide what it needs via its probe method instead. Signed-off-by: Nicolas Pitre <nico@cam.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> | 07 October 2005, 12:45:35 UTC |
| 460dc98 | Clemens Ladisch | 16 September 2005, 14:56:01 UTC | [ALSA] usb-audio: ignore Hercules DJ Console mixer errors USB generic driver Add a quirk entry for the Hercules DJ Console to ignore timeouts on some mixer control transfers. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> | 07 October 2005, 12:45:33 UTC |
