Revision e62d3dc6fd14d4dbafae1212f44e0a77a2c7de80 authored by Anton Barty on 10 June 2013, 19:02:48 UTC, committed by Anton Barty on 10 June 2013, 19:02:48 UTC
1 parent 52e43a5
INSTALL.md
# Cheetah Installation Instructions
### Preparing for the build
To build cheetah you need cmake (and optionally ccmake).
If you're on psexport you can just do:
$ export PATH=~filipe/cmake/bin:${PATH}
Otherwise just ask your sysadmin to install it.
If your HDF5 is not installed in a standard location set the
HDF5_ROOT environment variable to point to it, e.g.:
$ export HDF5_ROOT=${HOME}/local
$ export FFTW_DIR=${HOME}/local
You also need to have LCLS's ana available somewhere. If you're building
at CFEL, LCLS or Uppsala this should already be available.
If not you can try to use the scripts/download_psana.py to download it
but you will likely have to do modifications. The best is probably to
ask LCLS about getting a portable version of ana.
### Building and Installing
Now that you have cmake we can start the build:
- Create and go into a build directory:
$ mkdir build
$ cd build
- Run ccmake and point it to the base directory
$ ccmake ..
- You will see something like:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
ANA_ARCH x86_64-rhel6-gcc44-opt
ANA_RELEASE /opt/psana/g/psdm/portable/sw/releases/ana-current
ANA_SIT_DATA /opt/psana/g/psdm/portable/sw/releases/ana-current/../../../data
BUILD_CHEETAH_ANA_MOD ON
BUILD_CHEETAH_MYANA OFF
BUILD_PSANA ON
CMAKE_BUILD_TYPE
CMAKE_CXX_COMPILER /usr/bin/c++
CMAKE_C_COMPILER /usr/bin/cc
CMAKE_INSTALL_PREFIX /usr/local
HDF5_C_INCLUDE_DIR /opt/include
HDF5_hdf5_LIBRARY_RELEASE /opt/lib64/libhdf5.so
RPATH_ON_INSTALLED_BINS ON
ANA_ARCH: ana architecture to be used
Press [enter] to edit option CMake Version 2.8.10.2
Press [c] to configure
Press [h] for help Press [q] to quit without generating
Press [t] to toggle advanced mode (Currently Off)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
- It's possible that you have to specify `ANA_RELEASE` manually. It should
point to the ana-current directory, for example on psexport it is
`/reg/g/psdm/sw/releases/ana-current/`
- You can also specify the `CMAKE_INSTALL_PREFIX`. I set mine to `~/usr`
- Press "c" to configure.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
ANA_ARCH x86_64-rhel6-gcc44-opt
ANA_RELEASE /opt/psana/g/psdm/portable/sw/releases/ana-current
ANA_SIT_DATA /opt/psana/g/psdm/portable/sw/releases/ana-current/../../../data
BUILD_CHEETAH_ANA_MOD ON
BUILD_CHEETAH_MYANA OFF
BUILD_PSANA ON
CMAKE_BUILD_TYPE
CMAKE_CXX_COMPILER /usr/bin/c++
CMAKE_C_COMPILER /usr/bin/cc
CMAKE_INSTALL_PREFIX /home/filipe/usr
HDF5_C_INCLUDE_DIR /opt/include
HDF5_hdf5_LIBRARY_RELEASE /opt/lib64/libhdf5.so
RPATH_ON_INSTALLED_BINS ON
ANA_ARCH: ana architecture to be used
Press [enter] to edit option CMake Version 2.8.10.2
Press [c] to configure Press [g] to generate and exit
Press [h] for help Press [q] to quit without generating
Press [t] to toggle advanced mode (Currently Off)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
- If everything went well you should see a screen just like the one above and be able to press "g" to generate the Makefiles.
- When you press "g" ccmake will generate the necessary Makefiles and exit.
- Now just run make. This will build things and place the result in the
build directory.
$ make
- If you want to install just do.
$ make install
### Notes on psana and shared libraries
- If you do not care for `LD_LIBRARY_PATHs` and `RPATHs` you can safely skip
this section and everything should work as expected. Otherwise read on!
Cheetah uses as the main backend psana. psana looks up and loads shared
libraries at runtime according to the psana.cfg configuration files. If
it cannot find the library specified it will exit with an error. The
loaded dynamic libraries will themselves load other libraries, for
example libcheetah_ana_mod loads libcheetah such that you end up with
the following chain:
psana->libcheetah_ana_mod->libcheetah->libhdf5(among others)
This can often cause headaches for the user if the libraries are not in
standard locations (which they usually are not). One solution is to set
the `LD_LIBRARY_PATH` variable to include the directory of all the
necessary libraries. Another option is to set the `RPATH` on the programs
and libraries which tells them where to look for libraries. The `RPATH`
takes precedence over the `LD_LIBRARY_PATH` and because it's hardwired
is less flexible.
When building cheetah all binaries inside the build directory will
have the `RPATH` set to the location using during the linking stage. This
means that you should be able to run them directly from the build
directory without the need to set any `LD_LIBRARY_PATH`.
When you do `make install` the binaries are moved to their install
directory and the `RPATH` is can be removed from the binaries. This
means that on the one hand you now can control where they load the libraries from
using the `LD_LIBRARY_PATH`, but on the other hand they will likely not
find the required libraries if you do not specify any `LD_LIBRARY_PATH`.
If you wish to remove the `RPATH` from the installed binaries and you
know what you're doing set `RPATH_ON_INSTALLED_BINS` to FALSE in
`ccmake`.
![swh spinner](/static/img/swh-spinner.gif)
Computing file changes ...