| e6a588d | Linus Torvalds | 22 November 2014, 00:14:58 UTC | Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus Pull MIPS fixes from Ralf Baechle: "More 3.18 fixes for MIPS: - backtraces were not quite working on on 64-bit kernels - loongson needs a different cache coherency setting - Loongson 3 is a MIPS64 R2 version but due to erratum we treat is an older architecture revision. - fix build errors due to undefined references to __node_distances for certain configurations. - fix instruction decodig in the jump label code. - for certain configurations copy_{from,to}_user destroy the content of $3 so that register needs to be marked as clobbed by the calling code. - Hardware Table Walker fixes. - fill the delay slot of the last instruction of memcpy otherwise whatever ends up there randomly might have undesirable effects. - ensure get_user/__get_user always zero the variable to be read even in case of an error" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: MIPS: jump_label.c: Handle the microMIPS J instruction encoding MIPS: jump_label.c: Correct the span of the J instruction MIPS: Zero variable read by get_user / __get_user in case of an error. MIPS: lib: memcpy: Restore NOP on delay slot before returning to caller MIPS: tlb-r4k: Add missing HTW stop/start sequences MIPS: asm: uaccess: Add v1 register to clobber list on EVA MIPS: oprofile: Fix backtrace on 64-bit kernel MIPS: Loongson: Set Loongson-3's ISA level to MIPS64R1 MIPS: Loongson: Fix the write-combine CCA value setting MIPS: IP27: Fix __node_distances undefined error MIPS: Loongson3: Fix __node_distances undefined error | 22 November 2014, 00:14:58 UTC |
| 4fc82c0 | Linus Torvalds | 22 November 2014, 00:13:34 UTC | Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mpe/linux Pull powerpc fix from Michael Ellerman: "One fix from Scott, he says: This patch fixes a crash (introduced in v3.18-rc1) in the FSL MSI driver when threaded IRQs are enabled" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mpe/linux: powerpc/fsl_msi: mark the msi cascade handler IRQF_NO_THREAD | 22 November 2014, 00:13:34 UTC |
| c6c9161 | Linus Torvalds | 21 November 2014, 23:46:17 UTC | Merge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Thomas Gleixner: "Misc fixes: - gold linker build fix - noxsave command line parsing fix - bugfix for NX setup - microcode resume path bug fix - _TIF_NOHZ versus TIF_NOHZ bugfix as discussed in the mysterious lockup thread" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86, syscall: Fix _TIF_NOHZ handling in syscall_trace_enter_phase1 x86, kaslr: Handle Gold linker for finding bss/brk x86, mm: Set NX across entire PMD at boot x86, microcode: Update BSPs microcode on resume x86: Require exact match for 'noxsave' command line option | 21 November 2014, 23:46:17 UTC |
| 8b2ed21 | Linus Torvalds | 21 November 2014, 23:44:54 UTC | Merge branch 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler fixes from Ingo Molnar: "Misc fixes: two NUMA fixes, two cputime fixes and an RCU/lockdep fix" * 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/cputime: Fix clock_nanosleep()/clock_gettime() inconsistency sched/cputime: Fix cpu_timer_sample_group() double accounting sched/numa: Avoid selecting oneself as swap target sched/numa: Fix out of bounds read in sched_init_numa() sched: Remove lockdep check in sched_move_task() | 21 November 2014, 23:44:54 UTC |
| 13f5004 | Linus Torvalds | 21 November 2014, 23:44:07 UTC | Merge branch 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf fixes from Ingo Molnar: "Misc fixes: two Intel uncore driver fixes, a CPU-hotplug fix and a build dependencies fix" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/x86/intel/uncore: Fix boot crash on SBOX PMU on Haswell-EP perf/x86/intel/uncore: Fix IRP uncore register offsets on Haswell EP perf: Fix corruption of sibling list with hotplug perf/x86: Fix embarrasing typo | 21 November 2014, 23:44:07 UTC |
| a64bb02 | Linus Torvalds | 21 November 2014, 23:38:21 UTC | Merge branch 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull core fix from Ingo Molnar: "Fix GENMASK macro shift overflow" Nobody seems to currently use GENMASK() to fill every single last bit (which is what overflows) in-tree, and gcc would warn about it, so we have that going for us. But apparently there are pending changes that want this. * 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: bitops: Fix shift overflow in GENMASK macros | 21 November 2014, 23:38:21 UTC |
| b5e212a | Andy Lutomirski | 19 November 2014, 21:56:19 UTC | x86, syscall: Fix _TIF_NOHZ handling in syscall_trace_enter_phase1 TIF_NOHZ is 19 (i.e. _TIF_SYSCALL_TRACE | _TIF_NOTIFY_RESUME | _TIF_SINGLESTEP), not (1<<19). This code is involved in Dave's trinity lockup, but I don't see why it would cause any of the problems he's seeing, except inadvertently by causing a different path through entry_64.S's syscall handling. Signed-off-by: Andy Lutomirski <luto@amacapital.net> Cc: Don Zickus <dzickus@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Dave Jones <davej@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: http://lkml.kernel.org/r/a6cd3b60a3f53afb6e1c8081b0ec30ff19003dd7.1416434075.git.luto@amacapital.net Signed-off-by: Thomas Gleixner <tglx@linutronix.de> | 20 November 2014, 22:01:53 UTC |
| 935c2db | Maciej W. Rozycki | 17 November 2014, 16:10:32 UTC | MIPS: jump_label.c: Handle the microMIPS J instruction encoding Implement the microMIPS encoding of the J instruction for the purpose of the static keys feature, fixing a crash early on in bootstrap as the kernel is unhappy seeing the ISA bit set in jump table entries. Make sure the ISA bit correctly reflects the instruction encoding chosen for the kernel, 0 for the standard MIPS and 1 for the microMIPS encoding. Also make sure the instruction to patch is a 32-bit NOP in the microMIPS mode as by default the 16-bit short encoding is assumed Signed-off-by: Maciej W. Rozycki <macro@codesourcery.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/8516/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> | 19 November 2014, 17:22:09 UTC |
| 99436f7 | Maciej W. Rozycki | 17 November 2014, 16:09:54 UTC | MIPS: jump_label.c: Correct the span of the J instruction Correct the check for the span of the 256MB segment addressable by the J instruction according to this instruction's semantics. The calculation of the jump target is applied to the address of the delay-slot instruction that immediately follows. Adjust the check accordingly by adding 4 to `e->code' that holds the address of the J instruction itself. Signed-off-by: Maciej W. Rozycki <macro@codesourcery.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/8515/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> | 19 November 2014, 17:22:08 UTC |
| 640465b | Ralf Baechle | 18 November 2014, 17:47:13 UTC | MIPS: Zero variable read by get_user / __get_user in case of an error. This wasn't happening in all cases. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> | 19 November 2014, 17:22:08 UTC |
| 51b1029 | Markos Chandras | 17 November 2014, 09:32:38 UTC | MIPS: lib: memcpy: Restore NOP on delay slot before returning to caller Commit cf62a8b8134dd3 ("MIPS: lib: memcpy: Use macro to build the copy_user code") switched to a macro in order to build the memcpy symbols in preparation for the EVA support. However, this commit also removed the NOP instruction after the 'jr ra' when returning back to the caller. This had no visible side-effects since the next instruction was a load to the t0 register which was already in the clobbered list, but it may have undesired effects in the future if some other code is introduced in between the .Ldone and the .Ll_exc_copy labels. Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Cc: <stable@vger.kernel.org> # v3.15+ Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/8512/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> | 19 November 2014, 17:22:08 UTC |
| 6a8dff6 | Markos Chandras | 17 November 2014, 09:31:07 UTC | MIPS: tlb-r4k: Add missing HTW stop/start sequences HTW needs to stop and start again whenever the EntryHI register changes otherwise an inflight HTW operation might use the new EntryHI register for updating an old entry and that could lead to crashes or even a machine check exception. We fix this by ensuring the HTW has stop whenever the EntryHI register is about to change Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Cc: <stable@vger.kernel.org> # v3.17+ Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/8511/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> | 19 November 2014, 17:22:08 UTC |
| 5856381 | Markos Chandras | 17 November 2014, 09:30:23 UTC | MIPS: asm: uaccess: Add v1 register to clobber list on EVA When EVA is turned on and prefetching is being used in memcpy.S, the v1 register is being used as a helper register to the PREFE instruction. However, v1 ($3) was not in the clobber list, which means that the compiler did not preserve it across function calls, and that could corrupt the value of the register leading to all sorts of userland crashes. We fix this problem by using the DADDI_SCRATCH macro to define the clobbered register when CONFIG_EVA && CONFIG_CPU_HAS_PREFETCH are enabled. Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Cc: <stable@vger.kernel.org> # v3.15+ Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/8510/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> | 19 November 2014, 17:22:08 UTC |
| bbaf113 | Aaro Koskinen | 17 October 2014, 15:10:24 UTC | MIPS: oprofile: Fix backtrace on 64-bit kernel Fix incorrect cast that always results in wrong address for the new frame on 64-bit kernels. Signed-off-by: Aaro Koskinen <aaro.koskinen@nsn.com> Cc: stable@vger.kernel.org Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/8110/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> | 19 November 2014, 17:22:07 UTC |
| 7352c8b | Huacai Chen | 04 November 2014, 06:13:23 UTC | MIPS: Loongson: Set Loongson-3's ISA level to MIPS64R1 In CPU manual Loongson-3 is MIPS64R2 compatible, but during tests we found that its EI/DI instructions have problems. So we just set the ISA level to MIPS64R1. Signed-off-by: Huacai Chen <chenhc@lemote.com> Cc: John Crispin <john@phrozen.org> Cc: Steven J. Hill <Steven.Hill@imgtec.com> Cc: linux-mips@linux-mips.org Cc: Fuxin Zhang <zhangfx@lemote.com> Cc: Zhangjin Wu <wuzhangjin@gmail.com> Patchwork: https://patchwork.linux-mips.org/patch/8320/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> | 19 November 2014, 17:22:07 UTC |
| cc94ea3 | Huacai Chen | 04 November 2014, 06:13:22 UTC | MIPS: Loongson: Fix the write-combine CCA value setting All Loongson-2/3 processors support _CACHE_UNCACHED_ACCELERATED, not only Loongson-3A. Signed-off-by: Huacai Chen <chenhc@lemote.com> Cc: John Crispin <john@phrozen.org> Cc: Steven J. Hill <Steven.Hill@imgtec.com> Cc: linux-mips@linux-mips.org Cc: Fuxin Zhang <zhangfx@lemote.com> Cc: Zhangjin Wu <wuzhangjin@gmail.com> Patchwork: https://patchwork.linux-mips.org/patch/8319/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> | 19 November 2014, 17:22:07 UTC |
| 5829b0e | James Cowgill | 13 November 2014, 11:08:07 UTC | MIPS: IP27: Fix __node_distances undefined error export the __node_distances symbol in the ip27 memory code to fix the build error: Building modules, stage 2. MODPOST 311 modules ERROR: "__node_distances" [drivers/block/nvme.ko] undefined! scripts/Makefile.modpost:90: recipe for target '__modpost' failed when building the kernel with: CONFIG_SGI_IP27=y CONFIG_BLK_DEV_NVME=m Signed-off-by: James Cowgill <James.Cowgill@imgtec.com> Cc: <stable@vger.kernel.org> # v3.15+ Reviewed-by: James Hogan <james.hogan@imgtec.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> | 19 November 2014, 17:22:07 UTC |
| 21255da | James Cowgill | 13 November 2014, 11:08:06 UTC | MIPS: Loongson3: Fix __node_distances undefined error export the __node_distances symbol in the loongson3 numa code to fix the build error: Building modules, stage 2. MODPOST 221 modules ERROR: "__node_distances" [drivers/block/nvme.ko] undefined! scripts/Makefile.modpost:90: recipe for target '__modpost' failed when building the kernel with: CONFIG_CPU_LOONGSON3=y CONFIG_NUMA=y CONFIG_BLK_DEV_NVME=m Signed-off-by: James Cowgill <James.Cowgill@imgtec.com> Cc: <stable@vger.kernel.org> # v3.17+ Reviewed-by: James Hogan <james.hogan@imgtec.com> Reviewed-by: Huacai Chen <chenhc@lemote.com> Cc: linux-mips@linux-mips.org Cc: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Patchwork: https://patchwork.linux-mips.org/patch/8444/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> | 19 November 2014, 17:22:07 UTC |
| 70b61e3 | Kees Cook | 18 November 2014, 00:16:04 UTC | x86, kaslr: Handle Gold linker for finding bss/brk When building with the Gold linker, the .bss and .brk areas of vmlinux are shown as consecutive instead of having the same file offset. Allow for either state, as long as things add up correctly. Fixes: e6023367d779 ("x86, kaslr: Prevent .bss from overlaping initrd") Reported-by: Markus Trippelsdorf <markus@trippelsdorf.de> Signed-off-by: Kees Cook <keescook@chromium.org> Cc: Junjie Mao <eternal.n08@gmail.com> Link: http://lkml.kernel.org/r/20141118001604.GA25045@www.outflux.net Cc: stable@vger.kernel.org Signed-off-by: Thomas Gleixner <tglx@linutronix.de> | 18 November 2014, 17:32:24 UTC |
| 45e2a9d | Kees Cook | 14 November 2014, 19:47:37 UTC | x86, mm: Set NX across entire PMD at boot When setting up permissions on kernel memory at boot, the end of the PMD that was split from bss remained executable. It should be NX like the rest. This performs a PMD alignment instead of a PAGE alignment to get the correct span of memory. Before: ---[ High Kernel Mapping ]--- ... 0xffffffff8202d000-0xffffffff82200000 1868K RW GLB NX pte 0xffffffff82200000-0xffffffff82c00000 10M RW PSE GLB NX pmd 0xffffffff82c00000-0xffffffff82df5000 2004K RW GLB NX pte 0xffffffff82df5000-0xffffffff82e00000 44K RW GLB x pte 0xffffffff82e00000-0xffffffffc0000000 978M pmd After: ---[ High Kernel Mapping ]--- ... 0xffffffff8202d000-0xffffffff82200000 1868K RW GLB NX pte 0xffffffff82200000-0xffffffff82e00000 12M RW PSE GLB NX pmd 0xffffffff82e00000-0xffffffffc0000000 978M pmd [ tglx: Changed it to roundup(_brk_end, PMD_SIZE) and added a comment. We really should unmap the reminder along with the holes caused by init,initdata etc. but thats a different issue ] Signed-off-by: Kees Cook <keescook@chromium.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Toshi Kani <toshi.kani@hp.com> Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Cc: David Vrabel <david.vrabel@citrix.com> Cc: Wang Nan <wangnan0@huawei.com> Cc: Yinghai Lu <yinghai@kernel.org> Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/20141114194737.GA3091@www.outflux.net Signed-off-by: Thomas Gleixner <tglx@linutronix.de> | 18 November 2014, 17:32:24 UTC |
| fb86b97 | Borislav Petkov | 18 November 2014, 09:46:57 UTC | x86, microcode: Update BSPs microcode on resume In the situation when we apply early microcode but do *not* apply late microcode, we fail to update the BSP's microcode on resume because we haven't initialized the uci->mc microcode pointer. So, in order to alleviate that, we go and dig out the stashed microcode patch during early boot. It is basically the same thing that is done on the APs early during boot so do that too here. Tested-by: alex.schnaidt@gmail.com Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=88001 Cc: Henrique de Moraes Holschuh <hmh@hmh.eng.br> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: <stable@vger.kernel.org> # v3.9 Signed-off-by: Borislav Petkov <bp@suse.de> Link: http://lkml.kernel.org/r/20141118094657.GA6635@pd.tnic Signed-off-by: Thomas Gleixner <tglx@linutronix.de> | 18 November 2014, 17:32:24 UTC |
| d7ce437 | Kevin Hao | 14 November 2014, 05:51:22 UTC | powerpc/fsl_msi: mark the msi cascade handler IRQF_NO_THREAD The commit 543c043cbae7 ("powerpc/fsl_msi: change the irq handler from chained to normal") changes the msi cascade handler from chained to normal. Since cascade handler must run in hard interrupt context, this will cause kernel panic if we force threading of all the interrupt handler via kernel command parameter 'threadirqs'. So mark the irq handler IRQF_NO_THREAD explicitly. Signed-off-by: Kevin Hao <haokexin@gmail.com> Signed-off-by: Scott Wood <scottwood@freescale.com> | 18 November 2014, 04:00:30 UTC |
| fc14f9c | Linus Torvalds | 17 November 2014, 00:36:20 UTC | Linux 3.18-rc5 | 17 November 2014, 00:36:20 UTC |
| e35c5a2 | Linus Torvalds | 17 November 2014, 00:21:57 UTC | Merge tag 'armsoc-for-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC fixes from Olof Johansson: "Another small set of fixes: - some DT compatible typo fixes - irq setup fix dealing with irq storms on orion - i2c quirk generalization for mvebu - a handful of smaller fixes for OMAP - a couple of added file patterns for OMAP entries in MAINTAINERS" * tag 'armsoc-for-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: at91/dt: Fix sama5d3x typos pinctrl: dra: dt-bindings: Fix output pull up/down MAINTAINERS: Update entry for omap related .dts files to cover new SoCs MAINTAINERS: add more files under OMAP SUPPORT ARM: dts: AM437x-SK-EVM: Fix DCDC3 voltage ARM: dts: AM437x-GP-EVM: Fix DCDC3 voltage ARM: dts: AM43x-EPOS-EVM: Fix DCDC3 voltage ARM: dts: am335x-evm: Fix 5th NAND partition's name ARM: orion: Fix for certain sequence of request_irq can cause irq storm ARM: mvebu: armada xp: Generalize use of i2c quirk | 17 November 2014, 00:21:57 UTC |
| 435e46f | Linus Torvalds | 17 November 2014, 00:18:26 UTC | Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc Pull sparc fixes from David Miller: 1) Fix NULL oops in Schizo PCI controller error handler. 2) Fix race between xchg and other operations on 32-bit sparc, from Andreas Larsson. 3) swab*() helpers need a dummy memory input operand to show data flow on 64-bit sparc. 4) Fix RCU warnings due to missing irq_{enter,exit}() around generic_smp_call_function*() calls. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc: sparc64: Fix constraints on swab helpers. sparc32: Implement xchg and atomic_xchg using ATOMIC_HASH locks sparc64: Do irq_{enter,exit}() around generic_smp_call_function*(). sparc64: Fix crashes in schizo_pcierr_intr_other(). | 17 November 2014, 00:18:26 UTC |
| 0fbae13 | Linus Torvalds | 16 November 2014, 23:34:31 UTC | Merge tag 'md/3.18-fix' of git://neil.brown.name/md Pull md bugfix from Neil Brown: "One fix for md for 3.18. This fixes a regression introduced in 3.13" * tag 'md/3.18-fix' of git://neil.brown.name/md: md: Always set RECOVERY_NEEDED when clearing RECOVERY_FROZEN | 16 November 2014, 23:34:31 UTC |
| e899dba | Peter Rosin | 23 October 2014, 11:52:03 UTC | ARM: at91/dt: Fix sama5d3x typos Some DT files had a typo with a missing "5" in sama5d3x first compatible string. Signed-off-by: Peter Rosin <peda@axentia.se> [nicolas.ferre@atmel.com: modify commit log] Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Olof Johansson <olof@lixom.net> | 16 November 2014, 23:12:04 UTC |
| f7efdad | Olof Johansson | 16 November 2014, 23:09:53 UTC | Merge tag 'omap-fixes-against-v3.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes Merge "omap fixes against v3.18-rc4" from Tony Lindgren: Few omap fixes for hangs and wrong pinctrl defines, and update MAINTAINERS file to avoid missing PMIC and SoC related patches: - Fix random hangs on am437x because of incorrect default value for the DDR regulator - Fix wrong partition name for NAND on am335x-evm - Fix wrong pinctrl defines for dra7xx - Update maintainers entries for PMICs and SoCs * tag 'omap-fixes-against-v3.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: pinctrl: dra: dt-bindings: Fix output pull up/down MAINTAINERS: Update entry for omap related .dts files to cover new SoCs MAINTAINERS: add more files under OMAP SUPPORT ARM: dts: AM437x-SK-EVM: Fix DCDC3 voltage ARM: dts: AM437x-GP-EVM: Fix DCDC3 voltage ARM: dts: AM43x-EPOS-EVM: Fix DCDC3 voltage ARM: dts: am335x-evm: Fix 5th NAND partition's name Signed-off-by: Olof Johansson <olof@lixom.net> | 16 November 2014, 23:09:53 UTC |
| ae8f504 | Olof Johansson | 16 November 2014, 23:07:37 UTC | Merge tag 'mvebu-fixes-3.18' of git://git.infradead.org/linux-mvebu into fixes Merge "mvebu fixes for v3.18" from Jason Cooper: - Armada XP - Generalize i2c quirk - orion - Fix irq storm caused by specific sequence of request_irq * tag 'mvebu-fixes-3.18' of git://git.infradead.org/linux-mvebu: ARM: orion: Fix for certain sequence of request_irq can cause irq storm ARM: mvebu: armada xp: Generalize use of i2c quirk | 16 November 2014, 23:07:37 UTC |
| 45eaf45 | NeilBrown | 28 October 2014, 21:49:50 UTC | md: Always set RECOVERY_NEEDED when clearing RECOVERY_FROZEN md_check_recovery will skip any recovery and also clear MD_RECOVERY_NEEDED if MD_RECOVERY_FROZEN is set. So when we clear _FROZEN, we must set _NEEDED and ensure that md_check_recovery gets run. Otherwise we could miss out on something that is needed. In particular, this can make it impossible to remove a failed device from an array is the 'recovery-needed' processing didn't happen. Suitable for stable kernels since 3.13. Cc: stable@vger.kernel.org (3.13+) Reported-and-tested-by: Joe Lawrence <joe.lawrence@stratus.com> Fixes: 30b8feb730f9b9b3c5de02580897da03f59b6b16 Signed-off-by: NeilBrown <neilb@suse.de> | 16 November 2014, 22:17:46 UTC |
| 5a2b59d | David S. Miller | 16 November 2014, 21:19:32 UTC | sparc64: Fix constraints on swab helpers. We are reading the memory location, so we have to have a memory constraint in there purely for the sake of showing the data flow to the compiler. Reported-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 16 November 2014, 21:19:32 UTC |
| dec943f | Linus Torvalds | 16 November 2014, 19:36:54 UTC | Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "This is a set of six fixes and a MAINTAINER update. The fixes are two multipath (one in Test Unit Ready handling for the path checkers and one in the section of code that sends a start unit after failover; both of these were perturbed by the scsi-mq update), a CD-ROM door locking fix that was likewise introduced by scsi-mq and three driver fixes for a previous code update in cxgb4i, megaraid_sas and bnx2fc" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: bnx2fc: fix tgt spinlock locking megaraid_sas: fix bug in handling return value of pci_enable_msix_range() cxgb4i: send abort_rpl correctly cxgbi: add maintainer for cxgb3i/cxgb4i scsi: TUR path is down after adapter gets reset with multipath scsi: call device handler for failed TUR command scsi: only re-lock door after EH on devices that were reset | 16 November 2014, 19:36:54 UTC |
| de55bbb | Linus Torvalds | 16 November 2014, 19:19:25 UTC | Merge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Ingo Molnar: "Microcode fixes, a Xen fix and a KASLR boot loading fix with certain memory layouts" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86, microcode, AMD: Fix ucode patch stashing on 32-bit x86/core, x86/xen/smp: Use 'die_complete' completion when taking CPU down x86, microcode: Fix accessing dis_ucode_ldr on 32-bit x86, kaslr: Prevent .bss from overlaping initrd x86, microcode, AMD: Fix early ucode loading on 32-bit | 16 November 2014, 19:19:25 UTC |
| 3b91270 | Linus Torvalds | 16 November 2014, 19:00:42 UTC | x86-64: make csum_partial_copy_from_user() error handling consistent Al Viro pointed out that the x86-64 csum_partial_copy_from_user() is somewhat confused about what it should do on errors, notably it mostly clears the uncopied end result buffer, but misses that for the initial alignment case. All users should check for errors, so it's dubious whether the clearing is even necessary, and Al also points out that we should probably clean up the calling conventions, but regardless of any future changes to this function, the fact that it is inconsistent is just annoying. So make the __get_user() failure path use the same error exit as all the other errors do. Reported-by: Al Viro <viro@zeniv.linux.org.uk> Cc: David Miller <davem@davemloft.net> Cc: Andi Kleen <andi@firstfloor.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 16 November 2014, 19:00:42 UTC |
| 2cd3949 | Dave Hansen | 11 November 2014, 22:01:33 UTC | x86: Require exact match for 'noxsave' command line option We have some very similarly named command-line options: arch/x86/kernel/cpu/common.c:__setup("noxsave", x86_xsave_setup); arch/x86/kernel/cpu/common.c:__setup("noxsaveopt", x86_xsaveopt_setup); arch/x86/kernel/cpu/common.c:__setup("noxsaves", x86_xsaves_setup); __setup() is designed to match options that take arguments, like "foo=bar" where you would have: __setup("foo", x86_foo_func...); The problem is that "noxsave" actually _matches_ "noxsaves" in the same way that "foo" matches "foo=bar". If you boot an old kernel that does not know about "noxsaves" with "noxsaves" on the command line, it will interpret the argument as "noxsave", which is not what you want at all. This makes the "noxsave" handler only return success when it finds an *exact* match. [ tglx: We really need to make __setup() more robust. ] Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Cc: Dave Hansen <dave@sr71.net> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: x86@kernel.org Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/20141111220133.FE053984@viggo.jf.intel.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de> | 16 November 2014, 11:13:16 UTC |
| 6e99891 | Stanislaw Gruszka | 12 November 2014, 15:58:44 UTC | sched/cputime: Fix clock_nanosleep()/clock_gettime() inconsistency Commit d670ec13178d0 "posix-cpu-timers: Cure SMP wobbles" fixes one glibc test case in cost of breaking another one. After that commit, calling clock_nanosleep(TIMER_ABSTIME, X) and then clock_gettime(&Y) can result of Y time being smaller than X time. Reproducer/tester can be found further below, it can be compiled and ran by: gcc -o tst-cpuclock2 tst-cpuclock2.c -pthread while ./tst-cpuclock2 ; do : ; done This reproducer, when running on a buggy kernel, will complain about "clock_gettime difference too small". Issue happens because on start in thread_group_cputimer() we initialize sum_exec_runtime of cputimer with threads runtime not yet accounted and then add the threads runtime to running cputimer again on scheduler tick, making it's sum_exec_runtime bigger than actual threads runtime. KOSAKI Motohiro posted a fix for this problem, but that patch was never applied: https://lkml.org/lkml/2013/5/26/191 . This patch takes different approach to cure the problem. It calls update_curr() when cputimer starts, that assure we will have updated stats of running threads and on the next schedule tick we will account only the runtime that elapsed from cputimer start. That also assure we have consistent state between cpu times of individual threads and cpu time of the process consisted by those threads. Full reproducer (tst-cpuclock2.c): #define _GNU_SOURCE #include <unistd.h> #include <sys/syscall.h> #include <stdio.h> #include <time.h> #include <pthread.h> #include <stdint.h> #include <inttypes.h> /* Parameters for the Linux kernel ABI for CPU clocks. */ #define CPUCLOCK_SCHED 2 #define MAKE_PROCESS_CPUCLOCK(pid, clock) \ ((~(clockid_t) (pid) << 3) | (clockid_t) (clock)) static pthread_barrier_t barrier; /* Help advance the clock. */ static void *chew_cpu(void *arg) { pthread_barrier_wait(&barrier); while (1) ; return NULL; } /* Don't use the glibc wrapper. */ static int do_nanosleep(int flags, const struct timespec *req) { clockid_t clock_id = MAKE_PROCESS_CPUCLOCK(0, CPUCLOCK_SCHED); return syscall(SYS_clock_nanosleep, clock_id, flags, req, NULL); } static int64_t tsdiff(const struct timespec *before, const struct timespec *after) { int64_t before_i = before->tv_sec * 1000000000ULL + before->tv_nsec; int64_t after_i = after->tv_sec * 1000000000ULL + after->tv_nsec; return after_i - before_i; } int main(void) { int result = 0; pthread_t th; pthread_barrier_init(&barrier, NULL, 2); if (pthread_create(&th, NULL, chew_cpu, NULL) != 0) { perror("pthread_create"); return 1; } pthread_barrier_wait(&barrier); /* The test. */ struct timespec before, after, sleeptimeabs; int64_t sleepdiff, diffabs; const struct timespec sleeptime = {.tv_sec = 0,.tv_nsec = 100000000 }; /* The relative nanosleep. Not sure why this is needed, but its presence seems to make it easier to reproduce the problem. */ if (do_nanosleep(0, &sleeptime) != 0) { perror("clock_nanosleep"); return 1; } /* Get the current time. */ if (clock_gettime(CLOCK_PROCESS_CPUTIME_ID, &before) < 0) { perror("clock_gettime[2]"); return 1; } /* Compute the absolute sleep time based on the current time. */ uint64_t nsec = before.tv_nsec + sleeptime.tv_nsec; sleeptimeabs.tv_sec = before.tv_sec + nsec / 1000000000; sleeptimeabs.tv_nsec = nsec % 1000000000; /* Sleep for the computed time. */ if (do_nanosleep(TIMER_ABSTIME, &sleeptimeabs) != 0) { perror("absolute clock_nanosleep"); return 1; } /* Get the time after the sleep. */ if (clock_gettime(CLOCK_PROCESS_CPUTIME_ID, &after) < 0) { perror("clock_gettime[3]"); return 1; } /* The time after sleep should always be equal to or after the absolute sleep time passed to clock_nanosleep. */ sleepdiff = tsdiff(&sleeptimeabs, &after); if (sleepdiff < 0) { printf("absolute clock_nanosleep woke too early: %" PRId64 "\n", sleepdiff); result = 1; printf("Before %llu.%09llu\n", before.tv_sec, before.tv_nsec); printf("After %llu.%09llu\n", after.tv_sec, after.tv_nsec); printf("Sleep %llu.%09llu\n", sleeptimeabs.tv_sec, sleeptimeabs.tv_nsec); } /* The difference between the timestamps taken before and after the clock_nanosleep call should be equal to or more than the duration of the sleep. */ diffabs = tsdiff(&before, &after); if (diffabs < sleeptime.tv_nsec) { printf("clock_gettime difference too small: %" PRId64 "\n", diffabs); result = 1; } pthread_cancel(th); return result; } Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Rik van Riel <riel@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: http://lkml.kernel.org/r/20141112155843.GA24803@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org> | 16 November 2014, 09:04:20 UTC |
| 23cfa36 | Peter Zijlstra | 12 November 2014, 11:37:37 UTC | sched/cputime: Fix cpu_timer_sample_group() double accounting While looking over the cpu-timer code I found that we appear to add the delta for the calling task twice, through: cpu_timer_sample_group() thread_group_cputimer() thread_group_cputime() times->sum_exec_runtime += task_sched_runtime(); *sample = cputime.sum_exec_runtime + task_delta_exec(); Which would make the sample run ahead, making the sleep short. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Stanislaw Gruszka <sgruszka@redhat.com> Cc: Christoph Lameter <cl@linux.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Rik van Riel <riel@redhat.com> Cc: Tejun Heo <tj@kernel.org> Link: http://lkml.kernel.org/r/20141112113737.GI10476@twins.programming.kicks-ass.net Signed-off-by: Ingo Molnar <mingo@kernel.org> | 16 November 2014, 09:04:18 UTC |
| 7af6833 | Peter Zijlstra | 10 November 2014, 09:54:35 UTC | sched/numa: Avoid selecting oneself as swap target Because the whole numa task selection stuff runs with preemption enabled (its long and expensive) we can end up migrating and selecting oneself as a swap target. This doesn't really work out well -- we end up trying to acquire the same lock twice for the swap migrate -- so avoid this. Reported-and-Tested-by: Sasha Levin <sasha.levin@oracle.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: http://lkml.kernel.org/r/20141110100328.GF29390@twins.programming.kicks-ass.net Signed-off-by: Ingo Molnar <mingo@kernel.org> | 16 November 2014, 09:04:17 UTC |
| 00b4d9a | Maxime COQUELIN | 06 November 2014, 09:54:19 UTC | bitops: Fix shift overflow in GENMASK macros On some 32 bits architectures, including x86, GENMASK(31, 0) returns 0 instead of the expected ~0UL. This is the same on some 64 bits architectures with GENMASK_ULL(63, 0). This is due to an overflow in the shift operand, 1 << 32 for GENMASK, 1 << 64 for GENMASK_ULL. Reported-by: Eric Paire <eric.paire@st.com> Suggested-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: Maxime Coquelin <maxime.coquelin@st.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: <stable@vger.kernel.org> # v3.13+ Cc: linux@rasmusvillemoes.dk Cc: gong.chen@linux.intel.com Cc: John Sullivan <jsrhbz@kanargh.force9.co.uk> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Theodore Ts'o <tytso@mit.edu> Fixes: 10ef6b0dffe4 ("bitops: Introduce a more generic BITMASK macro") Link: http://lkml.kernel.org/r/1415267659-10563-1-git-send-email-maxime.coquelin@st.com Signed-off-by: Ingo Molnar <mingo@kernel.org> | 16 November 2014, 08:55:39 UTC |
| 6805591 | Andi Kleen | 04 November 2014, 01:00:28 UTC | perf/x86/intel/uncore: Fix boot crash on SBOX PMU on Haswell-EP There were several reports that on some systems writing the SBOX0 PMU initialization MSR would #GP at boot. This did not happen on all systems -- my two test systems booted fine. Writing the three initialization bits bit-by-bit seems to avoid the problem. So add a special callback to do just that. This replaces an earlier patch that disabled the SBOX. Reported-by: Alexei Starovoitov <alexei.starovoitov@gmail.com> Reported-and-Tested-by: Patrick Lu <patrick.lu@intel.com> Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Link: http://lkml.kernel.org/r/1415062828-19759-4-git-send-email-andi@firstfloor.org [ Fixed a whitespace error and added attribution tags that were left out inexplicably. ] Signed-off-by: Ingo Molnar <mingo@kernel.org> | 16 November 2014, 08:53:36 UTC |
| 41a134a | Andi Kleen | 04 November 2014, 01:00:27 UTC | perf/x86/intel/uncore: Fix IRP uncore register offsets on Haswell EP The counter register offsets for the IRP box PMU for Haswell-EP were incorrect. The offsets actually changed over IvyBridge EP. Fix them to the correct values. For this we need to fork the read function from the IVB and use an own counter array. Tested-by: patrick.lu@intel.com Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Link: http://lkml.kernel.org/r/1415062828-19759-3-git-send-email-andi@firstfloor.org Signed-off-by: Ingo Molnar <mingo@kernel.org> | 16 November 2014, 08:45:47 UTC |
| 226424e | Mark Rutland | 05 November 2014, 16:11:44 UTC | perf: Fix corruption of sibling list with hotplug When a CPU hotplugged out, we call perf_remove_from_context() (via perf_event_exit_cpu()) to rip each CPU-bound event out of its PMU's cpu context, but leave siblings grouped together. Freeing of these events is left to the mercy of the usual refcounting. When a CPU-bound event's refcount drops to zero we cross-call to __perf_remove_from_context() to clean it up, detaching grouped siblings. This works when the relevant CPU is online, but will fail if the CPU is currently offline, and we won't detach the event from its siblings before freeing the event, leaving the sibling list corrupt. If the sibling list is later walked (e.g. because the CPU cam online again before a remaining sibling's refcount drops to zero), we will walk the now corrupted siblings list, potentially dereferencing garbage values. Given that the events should never be scheduled again (as we removed them from their context), we can simply detatch siblings when the CPU goes down in the first place. If the CPU comes back online, the redundant call to __perf_remove_from_context() is safe. Reported-by: Drew Richardson <drew.richardson@arm.com> Signed-off-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: vincent.weaver@maine.edu Cc: Vince Weaver <vincent.weaver@maine.edu> Cc: Will Deacon <will.deacon@arm.com> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: http://lkml.kernel.org/r/1415203904-25308-2-git-send-email-mark.rutland@arm.com Signed-off-by: Ingo Molnar <mingo@kernel.org> | 16 November 2014, 08:45:46 UTC |
| 5f01feb | Linus Torvalds | 15 November 2014, 23:45:07 UTC | Merge branch 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm Pull ARM fixes from Russell King: "Two fixes this time, one to ensure that the kuser helper option depends on MMU as they aren't available for noMMU targets (and if the option is selected, we end up oopsing.) The second fix plugs a corner case with the decompressor, ensuring that the instruction stream can see the relocated code in every case on ARMv7 CPUs" * 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm: ARM: 8198/1: make kuser helpers depend on MMU ARM: 8191/1: decompressor: ensure I-side picks up relocated code | 15 November 2014, 23:45:07 UTC |
| 555e598 | Linus Torvalds | 15 November 2014, 23:26:48 UTC | Merge branch 'parisc-3.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux Pull parisc updates from Helge Deller: "Changes include: - wire up the bpf syscall - remove CONFIG_64BIT usage from some userspace-exported header files - use compat functions for msgctl, shmat, shmctl and semtimedop syscalls" * 'parisc-3.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: Avoid using CONFIG_64BIT in userspace exported headers parisc: Use compat layer for msgctl, shmat, shmctl and semtimedop syscalls parisc: Use BUILD_BUG() instead of undefined functions parisc: Wire up bpf syscall | 15 November 2014, 23:26:48 UTC |
| ec7de65 | Linus Torvalds | 15 November 2014, 23:22:51 UTC | Merge tag 'for-v3.18-rc' of git://git.infradead.org/battery-2.6 Pull power supply updates from Sebastian Reichel: "Power supply and reset changes for the v3.18-rc: - misc. charger-manager fixes - year 2038 fix in ab8500_fg - fix error handling of bq2415x_charger" * tag 'for-v3.18-rc' of git://git.infradead.org/battery-2.6: power: charger-manager: Fix accessing invalidated power supply after charger unbind power: charger-manager: Fix accessing invalidated power supply after fuel gauge unbind power: charger-manager: Avoid recursive thermal get_temp call power_supply: Add no_thermal property to prevent recursive get_temp calls power: bq2415x_charger: Fix memory leak on DTS parsing error power: bq2415x_charger: Properly handle ENODEV from power_supply_get_by_phandle power: ab8500_fg.c: use 64-bit time types | 15 November 2014, 23:22:51 UTC |
| e061167 | Linus Torvalds | 15 November 2014, 22:58:40 UTC | Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux Pull drm gixes from Dave Airlie: - exynos: infinite loop regressions fixed - i915: one regression - radeon: one race condition on monitor probing - noveau: two regressions - tegra: one vblank regression fix * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm/tegra: dc: Add missing call to drm_vblank_on() drm/nouveau/nv50/disp: Fix modeset on G94 drm/gk20a/fb: fix setting of large page size bit drm/radeon: add locking around atombios scratch space usage drm/i915: Fix obj->map_and_fenceable across tiling changes drm/exynos: fix possible infinite loop issue drm/exynos: g2d: fix null pointer dereference drm/exynos: resolve infinite loop issue on non multi-platform drm/exynos: resolve infinite loop issue on multi-platform | 15 November 2014, 22:58:40 UTC |
| 51b97e3 | Kirill A. Shutemov | 20 October 2014, 09:23:12 UTC | kernel: use the gnu89 standard explicitly Sasha Levin reports: "gcc5 changes the default standard to c11, which makes kernel build unhappy Explicitly define the kernel standard to be gnu89 which should keep everything working exactly like it was before gcc5" There are multiple small issues with the new default, but the biggest issue seems to be that the old - and very useful - GNU extension to allow a cast in front of an initializer has gone away. Patch updated by Kirill: "I'm pretty sure all gcc versions you can build kernel with supports -std=gnu89. cc-option is redunrant. We also need to adjust HOSTCFLAGS otherwise allmodconfig fails for me" Note by Andrew Pinski: "Yes it was reported and both problems relating to this extension has been added to gnu99 and gnu11. Though there are other issues with the kernel dealing with extern inline have different semantics between gnu89 and gnu99/11" End result: we may be able to move up to a newer stdc model eventually, but right now the newer models have some annoying deficiencies, so the traditional "gnu89" model ends up being the preferred one. Signed-off-by: Sasha Levin <sasha.levin@oracle.com> Singed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 15 November 2014, 22:29:55 UTC |
| 1afcb6e | Linus Torvalds | 15 November 2014, 22:15:16 UTC | Merge tag 'nfs-for-3.18-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfs Pull NFS client bugfixes from Trond Myklebust: "Highlights include: - stable patches to fix NFSv4.x delegation reclaim error paths - fix a bug whereby we were advertising NFSv4.1 but using NFSv4.2 features - fix a use-after-free problem with pNFS block layouts - fix a memory leak in the pNFS files O_DIRECT code - replace an intrusive and Oops-prone performance fix in the NFSv4 atomic open code with a safer one-line version and revert the two original patches" * tag 'nfs-for-3.18-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: sunrpc: fix sleeping under rcu_read_lock in gss_stringify_acceptor NFS: Don't try to reclaim delegation open state if recovery failed NFSv4: Ensure that we call FREE_STATEID when NFSv4.x stateids are revoked NFSv4: Fix races between nfs_remove_bad_delegation() and delegation return NFSv4.1: nfs41_clear_delegation_stateid shouldn't trust NFS_DELEGATED_STATE NFSv4: Ensure that we remove NFSv4.0 delegations when state has expired NFS: SEEK is an NFS v4.2 feature nfs: Fix use of uninitialized variable in nfs_getattr() nfs: Remove bogus assignment nfs: remove spurious WARN_ON_ONCE in write path pnfs/blocklayout: serialize GETDEVICEINFO calls nfs: fix pnfs direct write memory leak Revert "NFS: nfs4_do_open should add negative results to the dcache." Revert "NFS: remove BUG possibility in nfs4_open_and_get_state" NFSv4: Ensure nfs_atomic_open set the dentry verifier on ENOENT | 15 November 2014, 22:15:16 UTC |
| 56c381f | Linus Torvalds | 14 November 2014, 22:31:54 UTC | Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input subsystem updates from Dmitry Torokhov: "Mostly small fixups to PS/2 tochpad drivers (ALPS, Elantech, Synaptics) to better deal with specific hardware" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: elantech - update the documentation Input: elantech - provide a sysfs knob for crc_enabled Input: elantech - report the middle button of the touchpad Input: alps - ignore bad data on Dell Latitudes E6440 and E7440 Input: alps - allow up to 2 invalid packets without resetting device Input: alps - ignore potential bare packets when device is out of sync Input: elantech - fix crc_enabled for Fujitsu H730 Input: elantech - use elantech_report_trackpoint for hardware v4 too Input: twl4030-pwrbutton - ensure a wakeup event is recorded. Input: synaptics - add min/max quirk for Lenovo T440s | 14 November 2014, 22:31:54 UTC |
| 0861fd1 | Linus Torvalds | 14 November 2014, 22:24:33 UTC | Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 fixes from Catalin Marinas: - fix EFI stub cache maintenance causing aborts during boot on certain platforms - handle byte stores in __clear_user without panicking - fix race condition in aarch64_insn_patch_text_sync() (instruction patching) - Couple of type fixes * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: ARCH_PFN_OFFSET should be unsigned long Correct the race condition in aarch64_insn_patch_text_sync() arm64: __clear_user: handle exceptions on strb arm64: Fix data type for physical address arm64: efi: Fix stub cache maintenance | 14 November 2014, 22:24:33 UTC |
| 5ae9376 | Linus Torvalds | 14 November 2014, 22:20:46 UTC | Merge tag 'platform-drivers-x86-v3.18-3' of git://git.infradead.org/users/dvhart/linux-platform-drivers-x86 Pull x86 platform drivers fixlets from Darren Hart: "Just two patches to remove hp_accel events from the keyboard bus stream via an i8042 filter" * tag 'platform-drivers-x86-v3.18-3' of git://git.infradead.org/users/dvhart/linux-platform-drivers-x86: platform: hp_accel: Add SERIO_I8042 as a dependency since it now includes i8042.h/serio.h platform: hp_accel: add a i8042 filter to remove HPQ6000 data from kb bus stream | 14 November 2014, 22:20:46 UTC |
| e57c641 | Linus Torvalds | 14 November 2014, 22:09:19 UTC | Merge branch 'for-3.18-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata Pull libata fixes from Tejun Heo: "The most notable is the revert of lock splitting optimization in ahci. This also made the IRQ handling threaded even when there's only one IRQ in use. The conversion missed IRFQ_SHARED leading to screaming IRQs problem in some cases and the threaded IRQ handling showed performance regression in some LKP test cases. The changes are reverted for now. It'll probably be retried once threaded IRQ handling is removed from ahci. Other than that, there's one fix for ahci and several patches adding device IDs" * 'for-3.18-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata: ahci: fix AHCI parameters not taken into account ata: sata_rcar: Add r8a7793 device support ahci: Add Device IDs for Intel Sunrise Point PCH ahci: disable MSI instead of NCQ on Samsung pci-e SSDs on macbooks Revert "AHCI: Optimize single IRQ interrupt processing" Revert "AHCI: Do not acquire ata_host::lock from single IRQ handler" ata: sata_rcar: Disable DIPM mode for r8a7790 ES1 | 14 November 2014, 22:09:19 UTC |
| 6f0d7a9 | Linus Torvalds | 14 November 2014, 22:03:23 UTC | Merge branch 'for-linus' of git://git.kernel.dk/linux-block Pull block layer fixes from Jens Axboe: "Four small fixes that should be merged for the current 3.18-rc series. This pull request contains: - a minor bugfix for computation of best IO priority given two merging requests. From Jan Kara. - the final (final) merge count issue that has been plaguing virtio-blk. From Ming Lei. - enable parallel reinit notify for blk-mq queues, to combine the cost of an RCU grace period across lots of devices. From Tejun Heo. - an error handling fix for the SCSI_IOCTL_SEND_COMMAND ioctl. From Tony Battersby" * 'for-linus' of git://git.kernel.dk/linux-block: block: blk-merge: fix blk_recount_segments() scsi: Fix more error handling in SCSI_IOCTL_SEND_COMMAND blk-mq: make mq_queue_reinit_notify() freeze queues in parallel block: Fix computation of merged request priority | 14 November 2014, 22:03:23 UTC |
| 78646f6 | Linus Torvalds | 14 November 2014, 21:38:02 UTC | Merge tag 'pm+acpi-3.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI and power management fixes from Rafael Wysocki: "These are three regression fixes, two recent (generic power domains, suspend-to-idle) and one older (cpufreq), an ACPI blacklist entry for one more machine having problems with Windows 8 compatibility, a minor cpufreq driver fix (cpufreq-dt) and a fixup for new callback definitions (generic power domains). Specifics: - Fix a crash in the suspend-to-idle code path introduced by a recent commit that forgot to check a pointer against NULL before dereferencing it (Dmitry Eremin-Solenikov). - Fix a boot crash on Exynos5 introduced by a recent commit making that platform use generic Device Tree bindings for power domains which exposed a weakness in the generic power domains framework leading to that crash (Ulf Hansson). - Fix a crash during system resume on systems where cpufreq depends on Operation Performance Points (OPP) for functionality, but CONFIG_OPP is not set. This leads the cpufreq driver registration to fail, but the resume code attempts to restore the pre-suspend cpufreq configuration (which does not exist) nevertheless and crashes. From Geert Uytterhoeven. - Add a new ACPI blacklist entry for Dell Vostro 3546 that has problems if it is reported as Windows 8 compatible to the BIOS (Adam Lee). - Fix swapped arguments in an error message in the cpufreq-dt driver (Abhilash Kesavan). - Fix up the prototypes of new callbacks in struct generic_pm_domain to make them more useful. Users of those callbacks will be added in 3.19 and it's better for them to be based on the correct struct definition in mainline from the start. From Ulf Hansson and Kevin Hilman" * tag 'pm+acpi-3.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: PM / Domains: Fix initial default state of the need_restore flag PM / sleep: Fix entering suspend-to-IDLE if no freeze_oops is set PM / Domains: Change prototype for the attach and detach callbacks cpufreq: Avoid crash in resume on SMP without OPP cpufreq: cpufreq-dt: Fix arguments in clock failure error message ACPI / blacklist: blacklist Win8 OSI for Dell Vostro 3546 | 14 November 2014, 21:38:02 UTC |
| f720d7d | Linus Torvalds | 14 November 2014, 20:44:48 UTC | Merge tag 'firewire-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394 Pull firewire fix from Stefan Richter: "IEEE 1394 (FireWire) subsystem fix: The character device file interface for raw 1394 I/O took uninitialized kernel stack as substitute for missing ioctl() argument data. This could partially show up in subsequent read() output" * tag 'firewire-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394: firewire: cdev: prevent kernel stack leaking into ioctl arguments | 14 November 2014, 20:44:48 UTC |
| 3865efc | Linus Torvalds | 14 November 2014, 18:48:16 UTC | Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull vfs fix from Al Viro: "Fix for a really embarrassing braino in iov_iter. Kudos to paulus..." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: Fix thinko in iov_iter_single_seg_count | 14 November 2014, 18:48:16 UTC |
| 3168949 | Rafael J. Wysocki | 14 November 2014, 14:17:32 UTC | Merge branches 'pm-domains', 'pm-sleep' and 'pm-cpufreq' * pm-domains: PM / Domains: Fix initial default state of the need_restore flag PM / Domains: Change prototype for the attach and detach callbacks * pm-sleep: PM / sleep: Fix entering suspend-to-IDLE if no freeze_oops is set * pm-cpufreq: cpufreq: Avoid crash in resume on SMP without OPP cpufreq: cpufreq-dt: Fix arguments in clock failure error message | 14 November 2014, 14:17:32 UTC |
| a9b7071 | Rafael J. Wysocki | 14 November 2014, 14:17:17 UTC | Merge branch 'acpi-blacklist' * acpi-blacklist: ACPI / blacklist: blacklist Win8 OSI for Dell Vostro 3546 | 14 November 2014, 14:17:17 UTC |
| eaca2d8 | Stefan Richter | 11 November 2014, 16:16:44 UTC | firewire: cdev: prevent kernel stack leaking into ioctl arguments Found by the UC-KLEE tool: A user could supply less input to firewire-cdev ioctls than write- or write/read-type ioctl handlers expect. The handlers used data from uninitialized kernel stack then. This could partially leak back to the user if the kernel subsequently generated fw_cdev_event_'s (to be read from the firewire-cdev fd) which notably would contain the _u64 closure field which many of the ioctl argument structures contain. The fact that the handlers would act on random garbage input is a lesser issue since all handlers must check their input anyway. The fix simply always null-initializes the entire ioctl argument buffer regardless of the actual length of expected user input. That is, a runtime overhead of memset(..., 40) is added to each firewirew-cdev ioctl() call. [Comment from Clemens Ladisch: This part of the stack is most likely to be already in the cache.] Remarks: - There was never any leak from kernel stack to the ioctl output buffer itself. IOW, it was not possible to read kernel stack by a read-type or write/read-type ioctl alone; the leak could at most happen in combination with read()ing subsequent event data. - The actual expected minimum user input of each ioctl from include/uapi/linux/firewire-cdev.h is, in bytes: [0x00] = 32, [0x05] = 4, [0x0a] = 16, [0x0f] = 20, [0x14] = 16, [0x01] = 36, [0x06] = 20, [0x0b] = 4, [0x10] = 20, [0x15] = 20, [0x02] = 20, [0x07] = 4, [0x0c] = 0, [0x11] = 0, [0x16] = 8, [0x03] = 4, [0x08] = 24, [0x0d] = 20, [0x12] = 36, [0x17] = 12, [0x04] = 20, [0x09] = 24, [0x0e] = 4, [0x13] = 40, [0x18] = 4. Reported-by: David Ramos <daramos@stanford.edu> Cc: <stable@vger.kernel.org> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> | 14 November 2014, 11:10:13 UTC |
| b23dc5a | Linus Torvalds | 14 November 2014, 02:07:52 UTC | Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost Pull virtio bugfix from Michael S Tsirkin: "This fixes a crash in virtio console multi-channel mode that got introduced in -rc1" * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: virtio_console: move early VQ enablement | 14 November 2014, 02:07:52 UTC |
| 5cf5203 | Linus Torvalds | 14 November 2014, 01:54:08 UTC | Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net Pull networking fixes from David Miller: 1) sunhme driver lacks DMA mapping error checks, based upon a report by Meelis Roos. 2) Fix memory leak in mvpp2 driver, from Sudip Mukherjee. 3) DMA memory allocation sizes are wrong in systemport ethernet driver, fix from Florian Fainelli. 4) Fix use after free in mac80211 defragmentation code, from Johannes Berg. 5) Some networking uapi headers missing from Kbuild file, from Stephen Hemminger. 6) TUN driver gets csum_start offset wrong when VLAN accel is enabled, and macvtap has a similar bug, from Herbert Xu. 7) Adjust several tunneling drivers to set dev->iflink after registry, because registry sets that to -1 overwriting whatever we did. From Steffen Klassert. 8) Geneve forgets to set inner tunneling type, causing GSO segmentation to fail on some NICs. From Jesse Gross. 9) Fix several locking bugs in stmmac driver, from Fabrice Gasnier and Giuseppe CAVALLARO. 10) Fix spurious timeouts with NewReno on low traffic connections, from Marcelo Leitner. 11) Fix descriptor updates in enic driver, from Govindarajulu Varadarajan. 12) PPP calls bpf_prog_create() with locks held, which isn't kosher. Fix from Takashi Iwai. 13) Fix NULL deref in SCTP with malformed INIT packets, from Daniel Borkmann. 14) psock_fanout selftest accesses past the end of the mmap ring, fix from Shuah Khan. 15) Fix PTP timestamping for VLAN packets, from Richard Cochran. 16) netlink_unbind() calls in netlink pass wrong initial argument, from Hiroaki SHIMODA. 17) vxlan socket reuse accidently reuses a socket when the address family is different, so we have to explicitly check this, from Marcelo Lietner. 18) Fix missing include in nft_reject_bridge.c breaking the build on ppc and other architectures, from Guenter Roeck. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (75 commits) vxlan: Do not reuse sockets for a different address family smsc911x: power-up phydev before doing a software reset. lib: rhashtable - Remove weird non-ASCII characters from comments net/smsc911x: Fix delays in the PHY enable/disable routines net/smsc911x: Fix rare soft reset timeout issue due to PHY power-down mode netlink: Properly unbind in error conditions. net: ptp: fix time stamp matching logic for VLAN packets. cxgb4 : dcb open-lldp interop fixes selftests/net: psock_fanout seg faults in sock_fanout_read_ring() net: bcmgenet: apply MII configuration in bcmgenet_open() net: bcmgenet: connect and disconnect from the PHY state machine net: qualcomm: Fix dependency ixgbe: phy: fix uninitialized status in ixgbe_setup_phy_link_tnx net: phy: Correctly handle MII ioctl which changes autonegotiation. ipv6: fix IPV6_PKTINFO with v4 mapped net: sctp: fix memory leak in auth key management net: sctp: fix NULL pointer dereference in af->from_addr_param on malformed packet net: ppp: Don't call bpf_prog_create() in ppp_lock net/mlx4_en: Advertize encapsulation offloads features only when VXLAN tunnel is set cxgb4 : Fix bug in DCB app deletion ... | 14 November 2014, 01:54:08 UTC |
| c6c748e | Ulrik De Bie | 14 November 2014, 01:48:06 UTC | Input: elantech - update the documentation A chapter is added to describe the trackpoint packets. A section is added to describe the behaviour of the knob crc_enabled in sysfs. The introduction of the documentation only mentioned v1/v2, but in the last part it already contains explanation of v3 and v4. The introduction is updated. Signed-off-by: Ulrik De Bie <ulrik.debie-os@e2big.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> | 14 November 2014, 01:50:23 UTC |
| 2d9eb81 | Ulrik De Bie | 14 November 2014, 01:47:04 UTC | Input: elantech - provide a sysfs knob for crc_enabled The detection of crc_enabled is known to fail for Fujitsu H730. A DMI blacklist is added for that, but it can be expected that other laptops will pop up with this. Here a sysfs knob is provided to alter the behaviour of crc_enabled. Writing 0 or 1 to it sets the variable to 0 or 1. Reading it will show the crc_enabled variable (0 or 1). Reported-by: Stefan Valouch <stefan@valouch.com> Signed-off-by: Ulrik De Bie <ulrik.debie-os@e2big.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> | 14 November 2014, 01:50:23 UTC |
| f386474 | Ulrik De Bie | 14 November 2014, 01:45:12 UTC | Input: elantech - report the middle button of the touchpad In the past, no elantech was known with 3 touchpad mouse buttons. Fujitsu H730 is the first known elantech with a middle button. This commit enables this middle button. For backwards compatibility, the Fujitsu is detected via DMI, and only for this one 3 buttons will be announced. Reported-by: Stefan Valouch <stefan@valouch.com> Signed-off-by: Ulrik De Bie <ulrik.debie-os@e2big.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> | 14 November 2014, 01:50:22 UTC |
| a7ef82a | Pali Rohár | 09 November 2014, 07:36:09 UTC | Input: alps - ignore bad data on Dell Latitudes E6440 and E7440 Sometimes on Dell Latitude laptops psmouse/alps driver receive invalid ALPS protocol V3 packets with bit7 set in last byte. More often it can be reproduced on Dell Latitude E6440 or E7440 with closed lid and pushing cover above touchpad. If bit7 in last packet byte is set then it is not valid ALPS packet. I was told that ALPS devices never send these packets. It is not know yet who send those packets, it could be Dell EC, bug in BIOS and also bug in touchpad firmware... With this patch alps driver does not process those invalid packets, but instead of reporting PSMOUSE_BAD_DATA, getting into out of sync state, getting back in sync with the next byte and spam dmesg we return PSMOUSE_FULL_PACKET. If driver is truly out of sync we'll fail the checks on the next byte and report PSMOUSE_BAD_DATA then. Signed-off-by: Pali Rohár <pali.rohar@gmail.com> Tested-by: Pali Rohár <pali.rohar@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> | 14 November 2014, 01:42:57 UTC |
| 971ad4e | Linus Torvalds | 14 November 2014, 00:57:25 UTC | Merge branch 'akpm' (fixes from Andrew Morton) Merge misc fixes from Andrew Morton: "15 fixes" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: MAINTAINERS: add IIO include files kernel/panic.c: update comments for print_tainted mem-hotplug: reset node present pages when hot-adding a new pgdat mem-hotplug: reset node managed pages when hot-adding a new pgdat mm/debug-pagealloc: correct freepage accounting and order resetting fanotify: fix notification of groups with inode & mount marks mm, compaction: prevent infinite loop in compact_zone mm: alloc_contig_range: demote pages busy message from warn to info mm/slab: fix unalignment problem on Malta with EVA due to slab merge mm/page_alloc: restrict max order of merging on isolated pageblock mm/page_alloc: move freepage counting logic to __free_one_page() mm/page_alloc: add freepage on isolate pageblock to correct buddy list mm/page_alloc: fix incorrect isolation behavior by rechecking migratetype mm/compaction: skip the range until proper target pageblock is met zram: avoid kunmap_atomic() of a NULL pointer | 14 November 2014, 00:57:25 UTC |
| b0ab3f1 | Linus Torvalds | 14 November 2014, 00:36:42 UTC | Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client Pull Ceph fixes from Sage Weil: "There is an overflow bug fix for cephfs from Zheng, a fix for handling large authentication ticket buffers in libceph from Ilya, and a few fixes for the request handling code from Ilya that affect RBD volumes" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client: libceph: change from BUG to WARN for __remove_osd() asserts libceph: clear r_req_lru_item in __unregister_linger_request() libceph: unlink from o_linger_requests when clearing r_osd libceph: do not crash on large auth tickets ceph: fix flush tid comparision | 14 November 2014, 00:36:42 UTC |
| 6b07974 | Linus Torvalds | 14 November 2014, 00:19:14 UTC | Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid Pull HID fixes from Jiri Kosina: - fix for an oops in HID core upon repeated subdriver insertion/removal under certain circumstances, by Benjamin Tissoires - quirk for another Elan Touchscreen device, by Adel Gadllah * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: HID: core: cleanup .claimed field on disconnect HID: usbhid: enable always-poll quirk for Elan Touchscreen 0103 | 14 November 2014, 00:19:14 UTC |
| 8fe671f | Daniel Baluta | 13 November 2014, 23:19:47 UTC | MAINTAINERS: add IIO include files Files under include/linux/iio were not reported as part of the IIO subsystem. Signed-off-by: Daniel Baluta <daniel.baluta@intel.com> Reported-by: Cristina Ciocan <cristina.ciocan@intel.com> Reviewed-by: Jingoo Han <jg1.han@samsung.com> Cc: Hartmut Knaack <knaack.h@gmx.de> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Peter Meerwald <pmeerw@pmeerw.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 14 November 2014, 00:17:06 UTC |
| bc53a3f | Xie XiuQi | 13 November 2014, 23:19:44 UTC | kernel/panic.c: update comments for print_tainted Commit 69361eef9056 ("panic: add TAINT_SOFTLOCKUP") added the 'L' flag, but failed to update the comments for print_tainted(). So, update the comments. Signed-off-by: Xie XiuQi <xiexiuqi@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 14 November 2014, 00:17:06 UTC |
| 0bd8542 | Tang Chen | 13 November 2014, 23:19:41 UTC | mem-hotplug: reset node present pages when hot-adding a new pgdat When memory is hot-added, all the memory is in offline state. So clear all zones' present_pages because they will be updated in online_pages() and offline_pages(). Otherwise, /proc/zoneinfo will corrupt: When the memory of node2 is offline: # cat /proc/zoneinfo ...... Node 2, zone Movable ...... spanned 8388608 present 8388608 managed 0 When we online memory on node2: # cat /proc/zoneinfo ...... Node 2, zone Movable ...... spanned 8388608 present 16777216 managed 8388608 Signed-off-by: Tang Chen <tangchen@cn.fujitsu.com> Reviewed-by: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Cc: <stable@vger.kernel.org> [3.16+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 14 November 2014, 00:17:06 UTC |
| f784a3f | Tang Chen | 13 November 2014, 23:19:39 UTC | mem-hotplug: reset node managed pages when hot-adding a new pgdat In free_area_init_core(), zone->managed_pages is set to an approximate value for lowmem, and will be adjusted when the bootmem allocator frees pages into the buddy system. But free_area_init_core() is also called by hotadd_new_pgdat() when hot-adding memory. As a result, zone->managed_pages of the newly added node's pgdat is set to an approximate value in the very beginning. Even if the memory on that node has node been onlined, /sys/device/system/node/nodeXXX/meminfo has wrong value: hot-add node2 (memory not onlined) cat /sys/device/system/node/node2/meminfo Node 2 MemTotal: 33554432 kB Node 2 MemFree: 0 kB Node 2 MemUsed: 33554432 kB Node 2 Active: 0 kB This patch fixes this problem by reset node managed pages to 0 after hot-adding a new node. 1. Move reset_managed_pages_done from reset_node_managed_pages() to reset_all_zones_managed_pages() 2. Make reset_node_managed_pages() non-static 3. Call reset_node_managed_pages() in hotadd_new_pgdat() after pgdat is initialized Signed-off-by: Tang Chen <tangchen@cn.fujitsu.com> Signed-off-by: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Cc: <stable@vger.kernel.org> [3.16+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 14 November 2014, 00:17:06 UTC |
| 57cbc87 | Joonsoo Kim | 13 November 2014, 23:19:36 UTC | mm/debug-pagealloc: correct freepage accounting and order resetting One thing I did in this patch is fixing freepage accounting. If we clear guard page and link it onto isolate buddy list, we should not increase freepage count. This patch adds conditional branch to skip counting in this case. Without this patch, this overcounting happens frequently if guard order is set and CMA is used. Another thing fixed in this patch is the target to reset order. In __free_one_page(), we check the buddy page whether it is a guard page or not. And, if so, we should clear guard attribute on the buddy page and reset order of it to 0. But, current code resets original page's order rather than buddy one's. Maybe, this doesn't have any problem, because whole merged page's order will be re-assigned soon. But, it is better to correct code. Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Gioh Kim <gioh.kim@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 14 November 2014, 00:17:06 UTC |
| 8edc6e1 | Jan Kara | 13 November 2014, 23:19:33 UTC | fanotify: fix notification of groups with inode & mount marks fsnotify() needs to merge inode and mount marks lists when notifying groups about events so that ignore masks from inode marks are reflected in mount mark notifications and groups are notified in proper order (according to priorities). Currently the sorting of the lists done by fsnotify_add_inode_mark() / fsnotify_add_vfsmount_mark() and fsnotify() differed which resulted ignore masks not being used in some cases. Fix the problem by always using the same comparison function when sorting / merging the mark lists. Thanks to Heinrich Schuchardt for improvements of my patch. Link: https://bugzilla.kernel.org/show_bug.cgi?id=87721 Signed-off-by: Jan Kara <jack@suse.cz> Reported-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Tested-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 14 November 2014, 00:17:06 UTC |
| 1d5bfe1 | Vlastimil Babka | 13 November 2014, 23:19:30 UTC | mm, compaction: prevent infinite loop in compact_zone Several people have reported occasionally seeing processes stuck in compact_zone(), even triggering soft lockups, in 3.18-rc2+. Testing a revert of commit e14c720efdd7 ("mm, compaction: remember position within pageblock in free pages scanner") fixed the issue, although the stuck processes do not appear to involve the free scanner. Finally, by code inspection, the bug was found in isolate_migratepages() which uses a slightly different condition to detect if the migration and free scanners have met, than compact_finished(). That has not been a problem until commit e14c720efdd7 allowed the free scanner position between individual invocations to be in the middle of a pageblock. In a relatively rare case, the migration scanner position can end up at the beginning of a pageblock, with the free scanner position in the middle of the same pageblock. If it's the migration scanner's turn, isolate_migratepages() exits immediately (without updating the position), while compact_finished() decides to continue compaction, resulting in a potentially infinite loop. The system can recover only if another process creates enough high-order pages to make the watermark checks in compact_finished() pass. This patch fixes the immediate problem by bumping the migration scanner's position to meet the free scanner in isolate_migratepages(), when both are within the same pageblock. This causes compact_finished() to terminate properly. A more robust check in compact_finished() is planned as a cleanup for better future maintainability. Fixes: e14c720efdd73 ("mm, compaction: remember position within pageblock in free pages scanner) Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Reported-by: P. Christeas <xrg@linux.gr> Tested-by: P. Christeas <xrg@linux.gr> Link: http://marc.info/?l=linux-mm&m=141508604232522&w=2 Reported-by: Norbert Preining <preining@logic.at> Tested-by: Norbert Preining <preining@logic.at> Link: https://lkml.org/lkml/2014/11/4/904 Reported-by: Pavel Machek <pavel@ucw.cz> Link: https://lkml.org/lkml/2014/11/7/164 Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: David Rientjes <rientjes@google.com> Cc: Mel Gorman <mel@csn.ul.ie> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 14 November 2014, 00:17:06 UTC |
| dae803e | Michal Nazarewicz | 13 November 2014, 23:19:27 UTC | mm: alloc_contig_range: demote pages busy message from warn to info Having test_pages_isolated failure message as a warning confuses users into thinking that it is more serious than it really is. In reality, if called via CMA, allocation will be retried so a single test_pages_isolated failure does not prevent allocation from succeeding. Demote the warning message to an info message and reformat it such that the text "failed" does not appear and instead a less worrying "PFNS busy" is used. This message is trivially reproducible on a 10GB x86 machine on 3.16.y kernels configured with CONFIG_DMA_CMA. Signed-off-by: Michal Nazarewicz <mina86@mina86.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Peter Hurley <peter@hurleysoftware.com> Cc: Minchan Kim <minchan@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 14 November 2014, 00:17:05 UTC |
| 95069ac | Joonsoo Kim | 13 November 2014, 23:19:25 UTC | mm/slab: fix unalignment problem on Malta with EVA due to slab merge Unlike SLUB, sometimes, object isn't started at the beginning of the slab in SLAB. This causes the unalignment problem after slab merging is supported by commit 12220dea07f1 ("mm/slab: support slab merge"). Following is the report from Markos that fail to boot on Malta with EVA. Calibrating delay loop... 19.86 BogoMIPS (lpj=99328) pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 4096 (order: 0, 16384 bytes) Mountpoint-cache hash table entries: 4096 (order: 0, 16384 bytes) Kernel bug detected[#1]: CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.17.0-05639-g12220dea07f1 #1631 task: 1f04f5d8 ti: 1f050000 task.ti: 1f050000 epc : 80141190 alloc_unbound_pwq+0x234/0x304 Not tainted ra : 80141184 alloc_unbound_pwq+0x228/0x304 Process swapper/0 (pid: 1, threadinfo=1f050000, task=1f04f5d8, tls=00000000) Call Trace: alloc_unbound_pwq+0x234/0x304 apply_workqueue_attrs+0x11c/0x294 __alloc_workqueue_key+0x23c/0x470 init_workqueues+0x320/0x400 do_one_initcall+0xe8/0x23c kernel_init_freeable+0x9c/0x224 kernel_init+0x10/0x100 ret_from_kernel_thread+0x14/0x1c [ end trace cb88537fdc8fa200 ] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b alloc_unbound_pwq() allocates slab object from pool_workqueue. This kmem_cache requires 256 bytes alignment, but, current merging code doesn't honor that, and merge it with kmalloc-256. kmalloc-256 requires only cacheline size alignment so that above failure occurs. However, in x86, kmalloc-256 is luckily aligned in 256 bytes, so the problem didn't happen on it. To fix this problem, this patch introduces alignment mismatch check in find_mergeable(). This will fix the problem. Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Reported-by: Markos Chandras <Markos.Chandras@imgtec.com> Tested-by: Markos Chandras <Markos.Chandras@imgtec.com> Acked-by: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 14 November 2014, 00:17:05 UTC |
| 3c60509 | Joonsoo Kim | 13 November 2014, 23:19:21 UTC | mm/page_alloc: restrict max order of merging on isolated pageblock Current pageblock isolation logic could isolate each pageblock individually. This causes freepage accounting problem if freepage with pageblock order on isolate pageblock is merged with other freepage on normal pageblock. We can prevent merging by restricting max order of merging to pageblock order if freepage is on isolate pageblock. A side-effect of this change is that there could be non-merged buddy freepage even if finishing pageblock isolation, because undoing pageblock isolation is just to move freepage from isolate buddy list to normal buddy list rather than to consider merging. So, the patch also makes undoing pageblock isolation consider freepage merge. When un-isolation, freepage with more than pageblock order and it's buddy are checked. If they are on normal pageblock, instead of just moving, we isolate the freepage and free it in order to get merged. Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Cc: Mel Gorman <mgorman@suse.de> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Cc: Zhang Yanfei <zhangyanfei@cn.fujitsu.com> Cc: Tang Chen <tangchen@cn.fujitsu.com> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Cc: Wen Congyang <wency@cn.fujitsu.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Michal Nazarewicz <mina86@mina86.com> Cc: Laura Abbott <lauraa@codeaurora.org> Cc: Heesub Shin <heesub.shin@samsung.com> Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com> Cc: Ritesh Harjani <ritesh.list@gmail.com> Cc: Gioh Kim <gioh.kim@lge.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 14 November 2014, 00:17:05 UTC |
| 8f82b55 | Joonsoo Kim | 13 November 2014, 23:19:18 UTC | mm/page_alloc: move freepage counting logic to __free_one_page() All the caller of __free_one_page() has similar freepage counting logic, so we can move it to __free_one_page(). This reduce line of code and help future maintenance. This is also preparation step for "mm/page_alloc: restrict max order of merging on isolated pageblock" which fix the freepage counting problem on freepage with more than pageblock order. Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Cc: Mel Gorman <mgorman@suse.de> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Cc: Zhang Yanfei <zhangyanfei@cn.fujitsu.com> Cc: Tang Chen <tangchen@cn.fujitsu.com> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Cc: Wen Congyang <wency@cn.fujitsu.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Michal Nazarewicz <mina86@mina86.com> Cc: Laura Abbott <lauraa@codeaurora.org> Cc: Heesub Shin <heesub.shin@samsung.com> Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com> Cc: Ritesh Harjani <ritesh.list@gmail.com> Cc: Gioh Kim <gioh.kim@lge.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 14 November 2014, 00:17:05 UTC |
| 51bb1a4 | Joonsoo Kim | 13 November 2014, 23:19:14 UTC | mm/page_alloc: add freepage on isolate pageblock to correct buddy list In free_pcppages_bulk(), we use cached migratetype of freepage to determine type of buddy list where freepage will be added. This information is stored when freepage is added to pcp list, so if isolation of pageblock of this freepage begins after storing, this cached information could be stale. In other words, it has original migratetype rather than MIGRATE_ISOLATE. There are two problems caused by this stale information. One is that we can't keep these freepages from being allocated. Although this pageblock is isolated, freepage will be added to normal buddy list so that it could be allocated without any restriction. And the other problem is incorrect freepage accounting. Freepages on isolate pageblock should not be counted for number of freepage. Following is the code snippet in free_pcppages_bulk(). /* MIGRATE_MOVABLE list may include MIGRATE_RESERVEs */ __free_one_page(page, page_to_pfn(page), zone, 0, mt); trace_mm_page_pcpu_drain(page, 0, mt); if (likely(!is_migrate_isolate_page(page))) { __mod_zone_page_state(zone, NR_FREE_PAGES, 1); if (is_migrate_cma(mt)) __mod_zone_page_state(zone, NR_FREE_CMA_PAGES, 1); } As you can see above snippet, current code already handle second problem, incorrect freepage accounting, by re-fetching pageblock migratetype through is_migrate_isolate_page(page). But, because this re-fetched information isn't used for __free_one_page(), first problem would not be solved. This patch try to solve this situation to re-fetch pageblock migratetype before __free_one_page() and to use it for __free_one_page(). In addition to move up position of this re-fetch, this patch use optimization technique, re-fetching migratetype only if there is isolate pageblock. Pageblock isolation is rare event, so we can avoid re-fetching in common case with this optimization. This patch also correct migratetype of the tracepoint output. Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Acked-by: Minchan Kim <minchan@kernel.org> Acked-by: Michal Nazarewicz <mina86@mina86.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Cc: Mel Gorman <mgorman@suse.de> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Cc: Zhang Yanfei <zhangyanfei@cn.fujitsu.com> Cc: Tang Chen <tangchen@cn.fujitsu.com> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Cc: Wen Congyang <wency@cn.fujitsu.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Laura Abbott <lauraa@codeaurora.org> Cc: Heesub Shin <heesub.shin@samsung.com> Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com> Cc: Ritesh Harjani <ritesh.list@gmail.com> Cc: Gioh Kim <gioh.kim@lge.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 14 November 2014, 00:17:05 UTC |
| ad53f92 | Joonsoo Kim | 13 November 2014, 23:19:11 UTC | mm/page_alloc: fix incorrect isolation behavior by rechecking migratetype Before describing bugs itself, I first explain definition of freepage. 1. pages on buddy list are counted as freepage. 2. pages on isolate migratetype buddy list are *not* counted as freepage. 3. pages on cma buddy list are counted as CMA freepage, too. Now, I describe problems and related patch. Patch 1: There is race conditions on getting pageblock migratetype that it results in misplacement of freepages on buddy list, incorrect freepage count and un-availability of freepage. Patch 2: Freepages on pcp list could have stale cached information to determine migratetype of buddy list to go. This causes misplacement of freepages on buddy list and incorrect freepage count. Patch 4: Merging between freepages on different migratetype of pageblocks will cause freepages accouting problem. This patch fixes it. Without patchset [3], above problem doesn't happens on my CMA allocation test, because CMA reserved pages aren't used at all. So there is no chance for above race. With patchset [3], I did simple CMA allocation test and get below result: - Virtual machine, 4 cpus, 1024 MB memory, 256 MB CMA reservation - run kernel build (make -j16) on background - 30 times CMA allocation(8MB * 30 = 240MB) attempts in 5 sec interval - Result: more than 5000 freepage count are missed With patchset [3] and this patchset, I found that no freepage count are missed so that I conclude that problems are solved. On my simple memory offlining test, these problems also occur on that environment, too. This patch (of 4): There are two paths to reach core free function of buddy allocator, __free_one_page(), one is free_one_page()->__free_one_page() and the other is free_hot_cold_page()->free_pcppages_bulk()->__free_one_page(). Each paths has race condition causing serious problems. At first, this patch is focused on first type of freepath. And then, following patch will solve the problem in second type of freepath. In the first type of freepath, we got migratetype of freeing page without holding the zone lock, so it could be racy. There are two cases of this race. 1. pages are added to isolate buddy list after restoring orignal migratetype CPU1 CPU2 get migratetype => return MIGRATE_ISOLATE call free_one_page() with MIGRATE_ISOLATE grab the zone lock unisolate pageblock release the zone lock grab the zone lock call __free_one_page() with MIGRATE_ISOLATE freepage go into isolate buddy list, although pageblock is already unisolated This may cause two problems. One is that we can't use this page anymore until next isolation attempt of this pageblock, because freepage is on isolate buddy list. The other is that freepage accouting could be wrong due to merging between different buddy list. Freepages on isolate buddy list aren't counted as freepage, but ones on normal buddy list are counted as freepage. If merge happens, buddy freepage on normal buddy list is inevitably moved to isolate buddy list without any consideration of freepage accouting so it could be incorrect. 2. pages are added to normal buddy list while pageblock is isolated. It is similar with above case. This also may cause two problems. One is that we can't keep these freepages from being allocated. Although this pageblock is isolated, freepage would be added to normal buddy list so that it could be allocated without any restriction. And the other problem is same as case 1, that it, incorrect freepage accouting. This race condition would be prevented by checking migratetype again with holding the zone lock. Because it is somewhat heavy operation and it isn't needed in common case, we want to avoid rechecking as much as possible. So this patch introduce new variable, nr_isolate_pageblock in struct zone to check if there is isolated pageblock. With this, we can avoid to re-check migratetype in common case and do it only if there is isolated pageblock or migratetype is MIGRATE_ISOLATE. This solve above mentioned problems. Changes from v3: Add one more check in free_one_page() that checks whether migratetype is MIGRATE_ISOLATE or not. Without this, abovementioned case 1 could happens. Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Acked-by: Minchan Kim <minchan@kernel.org> Acked-by: Michal Nazarewicz <mina86@mina86.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Cc: Mel Gorman <mgorman@suse.de> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Cc: Zhang Yanfei <zhangyanfei@cn.fujitsu.com> Cc: Tang Chen <tangchen@cn.fujitsu.com> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Cc: Wen Congyang <wency@cn.fujitsu.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Laura Abbott <lauraa@codeaurora.org> Cc: Heesub Shin <heesub.shin@samsung.com> Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com> Cc: Ritesh Harjani <ritesh.list@gmail.com> Cc: Gioh Kim <gioh.kim@lge.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 14 November 2014, 00:17:05 UTC |
| 5842001 | Joonsoo Kim | 13 November 2014, 23:19:07 UTC | mm/compaction: skip the range until proper target pageblock is met Commit 7d49d8868336 ("mm, compaction: reduce zone checking frequency in the migration scanner") has a side-effect that changes the iteration range calculation. Before the change, block_end_pfn is calculated using start_pfn, but now it blindly adds pageblock_nr_pages to the previous value. This causes the problem that isolation_start_pfn is larger than block_end_pfn when we isolate the page with more than pageblock order. In this case, isolation would fail due to an invalid range parameter. To prevent this, this patch implements skipping the range until a proper target pageblock is met. Without this patch, CMA with more than pageblock order always fails but with this patch it will succeed. Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Minchan Kim <minchan@kernel.org> Cc: Michal Nazarewicz <mina86@mina86.com> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 14 November 2014, 00:17:05 UTC |
| c406515 | Weijie Yang | 13 November 2014, 23:19:05 UTC | zram: avoid kunmap_atomic() of a NULL pointer zram could kunmap_atomic() a NULL pointer in a rare situation: a zram page becomes a full-zeroed page after a partial write io. The current code doesn't handle this case and performs kunmap_atomic() on a NULL pointer, which panics the kernel. This patch fixes this issue. Signed-off-by: Weijie Yang <weijie.yang@samsung.com> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Dan Streetman <ddstreet@ieee.org> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Weijie Yang <weijie.yang.kh@gmail.com> Acked-by: Jerome Marchand <jmarchan@redhat.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 14 November 2014, 00:17:05 UTC |
| 08b964f | Nathan Lynch | 10 November 2014, 22:46:27 UTC | ARM: 8198/1: make kuser helpers depend on MMU The kuser helpers page is not set up on non-MMU systems, so it does not make sense to allow CONFIG_KUSER_HELPERS to be enabled when CONFIG_MMU=n. Allowing it to be set on !MMU results in an oops in set_tls (used in execve and the arm_syscall trap handler): Unhandled exception: IPSR = 00000005 LR = fffffff1 CPU: 0 PID: 1 Comm: swapper Not tainted 3.18.0-rc1-00041-ga30465a #216 task: 8b838000 ti: 8b82a000 task.ti: 8b82a000 PC is at flush_thread+0x32/0x40 LR is at flush_thread+0x21/0x40 pc : [<8f00157a>] lr : [<8f001569>] psr: 4100000b sp : 8b82be20 ip : 00000000 fp : 8b83c000 r10: 00000001 r9 : 88018c84 r8 : 8bb85000 r7 : 8b838000 r6 : 00000000 r5 : 8bb77400 r4 : 8b82a000 r3 : ffff0ff0 r2 : 8b82a000 r1 : 00000000 r0 : 88020354 xPSR: 4100000b CPU: 0 PID: 1 Comm: swapper Not tainted 3.18.0-rc1-00041-ga30465a #216 [<8f002bc1>] (unwind_backtrace) from [<8f002033>] (show_stack+0xb/0xc) [<8f002033>] (show_stack) from [<8f00265b>] (__invalid_entry+0x4b/0x4c) As best I can tell this issue existed for the set_tls ARM syscall before commit fbfb872f5f41 "ARM: 8148/1: flush TLS and thumbee register state during exec" consolidated the TLS manipulation code into the set_tls helper function, but now that we're using it to flush register state during execve, !MMU users encounter the oops at the first exec. Prevent CONFIG_MMU=n configurations from enabling CONFIG_KUSER_HELPERS. Fixes: fbfb872f5f41 (ARM: 8148/1: flush TLS and thumbee register state during exec) Signed-off-by: Nathan Lynch <nathan_lynch@mentor.com> Reported-by: Stefan Agner <stefan@agner.ch> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Cc: stable@vger.kernel.org Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> | 13 November 2014, 23:45:21 UTC |
| 238962a | Will Deacon | 04 November 2014, 10:40:46 UTC | ARM: 8191/1: decompressor: ensure I-side picks up relocated code To speed up decompression, the decompressor sets up a flat, cacheable mapping of memory. However, when there is insufficient space to hold the page tables for this mapping, we don't bother to enable the caches and subsequently skip all the cache maintenance hooks. Skipping the cache maintenance before jumping to the relocated code allows the processor to predict the branch and populate the I-cache with stale data before the relocation loop has completed (since a bootloader may have SCTLR.I set, which permits normal, cacheable instruction fetches regardless of SCTLR.M). This patch moves the cache maintenance check into the maintenance routines themselves, allowing the v6/v7 versions to invalidate the I-cache regardless of the MMU state. Cc: <stable@vger.kernel.org> Reported-by: Marc Carino <marc.ceeeee@gmail.com> Tested-by: Julien Grall <julien.grall@linaro.org> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> | 13 November 2014, 23:45:20 UTC |
| bcfef97 | Dave Airlie | 13 November 2014, 21:03:02 UTC | Merge tag 'drm/tegra/for-3.18-rc5' of git://people.freedesktop.org/~tagr/linux into drm-fixes drm/tegra: Fixes for v3.18-rc5 This is a single patch that fixes the VBLANK machinery after: 7ffd7a68511c drm: Always reject drm_vblank_get() after drm_vblank_off() * tag 'drm/tegra/for-3.18-rc5' of git://people.freedesktop.org/~tagr/linux: drm/tegra: dc: Add missing call to drm_vblank_on() | 13 November 2014, 21:03:02 UTC |
| 3d0f853 | Dave Airlie | 13 November 2014, 20:24:50 UTC | Merge branch 'linux-3.18' of git://anongit.freedesktop.org/git/nouveau/linux-2.6 into drm-fixes One modesetting, one gk20a fix. * 'linux-3.18' of git://anongit.freedesktop.org/git/nouveau/linux-2.6: drm/nouveau/nv50/disp: Fix modeset on G94 drm/gk20a/fb: fix setting of large page size bit | 13 November 2014, 20:24:50 UTC |
| 64e5fcc | Dave Airlie | 13 November 2014, 20:21:40 UTC | Merge tag 'drm-intel-fixes-2014-11-13' of git://anongit.freedesktop.org/drm-intel into drm-fixes one regression fix. * tag 'drm-intel-fixes-2014-11-13' of git://anongit.freedesktop.org/drm-intel: drm/i915: Fix obj->map_and_fenceable across tiling changes | 13 November 2014, 20:21:40 UTC |
| 19ca9fc | Marcelo Leitner | 13 November 2014, 16:43:08 UTC | vxlan: Do not reuse sockets for a different address family Currently, we only match against local port number in order to reuse socket. But if this new vxlan wants an IPv6 socket and a IPv4 one bound to that port, vxlan will reuse an IPv4 socket as IPv6 and a panic will follow. The following steps reproduce it: # ip link add vxlan6 type vxlan id 42 group 229.10.10.10 \ srcport 5000 6000 dev eth0 # ip link add vxlan7 type vxlan id 43 group ff0e::110 \ srcport 5000 6000 dev eth0 # ip link set vxlan6 up # ip link set vxlan7 up <panic> [ 4.187481] BUG: unable to handle kernel NULL pointer dereference at 0000000000000058 ... [ 4.188076] Call Trace: [ 4.188085] [<ffffffff81667c4a>] ? ipv6_sock_mc_join+0x3a/0x630 [ 4.188098] [<ffffffffa05a6ad6>] vxlan_igmp_join+0x66/0xd0 [vxlan] [ 4.188113] [<ffffffff810a3430>] process_one_work+0x220/0x710 [ 4.188125] [<ffffffff810a33c4>] ? process_one_work+0x1b4/0x710 [ 4.188138] [<ffffffff810a3a3b>] worker_thread+0x11b/0x3a0 [ 4.188149] [<ffffffff810a3920>] ? process_one_work+0x710/0x710 So address family must also match in order to reuse a socket. Reported-by: Jean-Tsung Hsiao <jhsiao@redhat.com> Signed-off-by: Marcelo Ricardo Leitner <mleitner@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 13 November 2014, 20:19:59 UTC |
| ccf899a | Enric Balletbo i Serra | 13 November 2014, 08:14:34 UTC | smsc911x: power-up phydev before doing a software reset. With commit be9dad1f9f26604fb ("net: phy: suspend phydev when going to HALTED"), the PHY device will be put in a low-power mode using BMCR_PDOWN if the the interface is set down. The smsc911x driver does a software_reset opening the device driver (ndo_open). In such case, the PHY must be powered-up before access to any register and before calling the software_reset function. Otherwise, as the PHY is powered down the software reset fails and the interface can not be enabled again. This patch fixes this scenario that is easy to reproduce setting down the network interface and setting up again. $ ifconfig eth0 down $ ifconfig eth0 up ifconfig: SIOCSIFFLAGS: Input/output error Signed-off-by: Enric Balletbo i Serra <eballetbo@iseebcn.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 13 November 2014, 20:09:28 UTC |
| 0c828f2 | Herbert Xu | 13 November 2014, 05:10:48 UTC | lib: rhashtable - Remove weird non-ASCII characters from comments My editor spewed garbage that looked like memory corruption on my screen. It turns out that a number of occurences of "fi" got turned into a ligature. This patch replaces these ligatures with the ASCII letters "fi". Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Cheers, Acked-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net> | 13 November 2014, 19:38:46 UTC |
| 6ff53fd | Alexander Kochetkov | 13 November 2014, 01:26:20 UTC | net/smsc911x: Fix delays in the PHY enable/disable routines Increased delay in the smsc911x_phy_disable_energy_detect (from 1ms to 2ms). Dropped delays in the smsc911x_phy_enable_energy_detect (100ms and 1ms). The patch affect SMSC LAN generation 4 chips with integrated PHY (LAN9221). I saw problems with soft reset due to wrong udelay timings. After I fixed udelay, I measured the time needed to bring integrated PHY from power-down to operational mode (the time beetween clearing EDPWRDOWN bit and soft reset complete event). I got 1ms (measured using ktime_get). The value is equal to the current value (1ms) used in the smsc911x_phy_disable_energy_detect. It is near the upper bound and in order to avoid rare soft reset faults it is doubled (2ms). I don't know official timing for bringing up integrated PHY as specs doesn't clarify this (or may be I didn't found). It looks safe to drop delays before and after setting EDPWRDOWN bit (enable PHY power-down mode). I didn't saw any regressions with the patch. The patch was reviewed by Steve Glendinning and Microchip Team. Signed-off-by: Alexander Kochetkov <al.kochet@gmail.com> Acked-by: Steve Glendinning <steve.glendinning@shawell.net> Signed-off-by: David S. Miller <davem@davemloft.net> | 13 November 2014, 19:37:53 UTC |
| 242bcd5 | Alexander Kochetkov | 13 November 2014, 01:26:19 UTC | net/smsc911x: Fix rare soft reset timeout issue due to PHY power-down mode The patch affect SMSC LAN generation 4 chips with integrated PHY (LAN9221). It is possible that PHY could enter power-down mode (ENERGYON clear), between ENERGYON bit check in smsc911x_phy_disable_energy_detect and SRST bit set in smsc911x_soft_reset. This could happen, for example, if someone disconnect ethernet cable between the checks. The PHY in a power-down mode would prevent the MAC portion of chip to be software reseted. Initially found by code review, confirmed later using test case. This is low probability issue, and in order to reproduce it you have to run the script: while true; do ifconfig eth0 down ifconfig eth0 up || break done While the script is running you have to plug/unplug ethernet cable many times (using gpio controlled ethernet switch, for example) until get: [ 4516.477783] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 4516.512207] smsc911x smsc911x.0: eth0: SMSC911x/921x identified at 0xce006000, IRQ: 336 [ 4516.524658] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 4516.559082] smsc911x smsc911x.0: eth0: SMSC911x/921x identified at 0xce006000, IRQ: 336 [ 4516.571990] ADDRCONF(NETDEV_UP): eth0: link is not ready ifconfig: SIOCSIFFLAGS: Input/output error The patch was reviewed by Steve Glendinning and Microchip Team. Signed-off-by: Alexander Kochetkov <al.kochet@gmail.com> Acked-by: Steve Glendinning <steve.glendinning@shawell.net> Signed-off-by: David S. Miller <davem@davemloft.net> | 13 November 2014, 19:37:53 UTC |
| cc9f1f5 | Ilya Dryomov | 05 November 2014, 16:33:44 UTC | libceph: change from BUG to WARN for __remove_osd() asserts No reason to use BUG_ON for osd request list assertions. Signed-off-by: Ilya Dryomov <idryomov@redhat.com> Reviewed-by: Alex Elder <elder@linaro.org> | 13 November 2014, 19:26:34 UTC |
| ba9d114 | Ilya Dryomov | 05 November 2014, 12:45:58 UTC | libceph: clear r_req_lru_item in __unregister_linger_request() kick_requests() can put linger requests on the notarget list. This means we need to clear the much-overloaded req->r_req_lru_item in __unregister_linger_request() as well, or we get an assertion failure in ceph_osdc_release_request() - !list_empty(&req->r_req_lru_item). AFAICT the assumption was that registered linger requests cannot be on any of req->r_req_lru_item lists, but that's clearly not the case. Signed-off-by: Ilya Dryomov <idryomov@redhat.com> Reviewed-by: Alex Elder <elder@linaro.org> | 13 November 2014, 19:21:14 UTC |
| a390de0 | Ilya Dryomov | 04 November 2014, 15:32:14 UTC | libceph: unlink from o_linger_requests when clearing r_osd Requests have to be unlinked from both osd->o_requests (normal requests) and osd->o_linger_requests (linger requests) lists when clearing req->r_osd. Otherwise __unregister_linger_request() gets confused and we trip over a !list_empty(&osd->o_linger_requests) assert in __remove_osd(). MON=1 OSD=1: # cat remove-osd.sh #!/bin/bash rbd create --size 1 test DEV=$(rbd map test) ceph osd out 0 sleep 3 rbd map dne/dne # obtain a new osdmap as a side effect rbd unmap $DEV & # will block sleep 3 ceph osd in 0 Signed-off-by: Ilya Dryomov <idryomov@redhat.com> Reviewed-by: Alex Elder <elder@linaro.org> | 13 November 2014, 19:21:13 UTC |
| aaef317 | Ilya Dryomov | 22 October 2014, 20:25:22 UTC | libceph: do not crash on large auth tickets Large (greater than 32k, the value of PAGE_ALLOC_COSTLY_ORDER) auth tickets will have their buffers vmalloc'ed, which leads to the following crash in crypto: [ 28.685082] BUG: unable to handle kernel paging request at ffffeb04000032c0 [ 28.686032] IP: [<ffffffff81392b42>] scatterwalk_pagedone+0x22/0x80 [ 28.686032] PGD 0 [ 28.688088] Oops: 0000 [#1] PREEMPT SMP [ 28.688088] Modules linked in: [ 28.688088] CPU: 0 PID: 878 Comm: kworker/0:2 Not tainted 3.17.0-vm+ #305 [ 28.688088] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2007 [ 28.688088] Workqueue: ceph-msgr con_work [ 28.688088] task: ffff88011a7f9030 ti: ffff8800d903c000 task.ti: ffff8800d903c000 [ 28.688088] RIP: 0010:[<ffffffff81392b42>] [<ffffffff81392b42>] scatterwalk_pagedone+0x22/0x80 [ 28.688088] RSP: 0018:ffff8800d903f688 EFLAGS: 00010286 [ 28.688088] RAX: ffffeb04000032c0 RBX: ffff8800d903f718 RCX: ffffeb04000032c0 [ 28.688088] RDX: 0000000000000000 RSI: 0000000000000001 RDI: ffff8800d903f750 [ 28.688088] RBP: ffff8800d903f688 R08: 00000000000007de R09: ffff8800d903f880 [ 28.688088] R10: 18df467c72d6257b R11: 0000000000000000 R12: 0000000000000010 [ 28.688088] R13: ffff8800d903f750 R14: ffff8800d903f8a0 R15: 0000000000000000 [ 28.688088] FS: 00007f50a41c7700(0000) GS:ffff88011fc00000(0000) knlGS:0000000000000000 [ 28.688088] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 28.688088] CR2: ffffeb04000032c0 CR3: 00000000da3f3000 CR4: 00000000000006b0 [ 28.688088] Stack: [ 28.688088] ffff8800d903f698 ffffffff81392ca8 ffff8800d903f6e8 ffffffff81395d32 [ 28.688088] ffff8800dac96000 ffff880000000000 ffff8800d903f980 ffff880119b7e020 [ 28.688088] ffff880119b7e010 0000000000000000 0000000000000010 0000000000000010 [ 28.688088] Call Trace: [ 28.688088] [<ffffffff81392ca8>] scatterwalk_done+0x38/0x40 [ 28.688088] [<ffffffff81392ca8>] scatterwalk_done+0x38/0x40 [ 28.688088] [<ffffffff81395d32>] blkcipher_walk_done+0x182/0x220 [ 28.688088] [<ffffffff813990bf>] crypto_cbc_encrypt+0x15f/0x180 [ 28.688088] [<ffffffff81399780>] ? crypto_aes_set_key+0x30/0x30 [ 28.688088] [<ffffffff8156c40c>] ceph_aes_encrypt2+0x29c/0x2e0 [ 28.688088] [<ffffffff8156d2a3>] ceph_encrypt2+0x93/0xb0 [ 28.688088] [<ffffffff8156d7da>] ceph_x_encrypt+0x4a/0x60 [ 28.688088] [<ffffffff8155b39d>] ? ceph_buffer_new+0x5d/0xf0 [ 28.688088] [<ffffffff8156e837>] ceph_x_build_authorizer.isra.6+0x297/0x360 [ 28.688088] [<ffffffff8112089b>] ? kmem_cache_alloc_trace+0x11b/0x1c0 [ 28.688088] [<ffffffff8156b496>] ? ceph_auth_create_authorizer+0x36/0x80 [ 28.688088] [<ffffffff8156ed83>] ceph_x_create_authorizer+0x63/0xd0 [ 28.688088] [<ffffffff8156b4b4>] ceph_auth_create_authorizer+0x54/0x80 [ 28.688088] [<ffffffff8155f7c0>] get_authorizer+0x80/0xd0 [ 28.688088] [<ffffffff81555a8b>] prepare_write_connect+0x18b/0x2b0 [ 28.688088] [<ffffffff81559289>] try_read+0x1e59/0x1f10 This is because we set up crypto scatterlists as if all buffers were kmalloc'ed. Fix it. Cc: stable@vger.kernel.org Signed-off-by: Ilya Dryomov <idryomov@redhat.com> Reviewed-by: Sage Weil <sage@redhat.com> | 13 November 2014, 19:21:12 UTC |
| 3231300 | Yan, Zheng | 23 October 2014, 00:13:26 UTC | ceph: fix flush tid comparision TID of cap flush ack is 64 bits, but ceph_inode_info::flushing_cap_tid is only 16 bits. 16 bits should be plenty to let the cap flush updates pipeline appropriately, but we need to cast in the proper direction when comparing these differently-sized versions. So downcast the 64-bits one to 16 bits. Reflects ceph.git commit a5184cf46a6e867287e24aeb731634828467cd98. Signed-off-by: Yan, Zheng <zyan@redhat.com> Reviewed-by: Ilya Dryomov <idryomov@redhat.com> | 13 November 2014, 19:19:05 UTC |
| ad0eab9 | Paul Mackerras | 13 November 2014, 09:15:23 UTC | Fix thinko in iov_iter_single_seg_count The branches of the if (i->type & ITER_BVEC) statement in iov_iter_single_seg_count() are the wrong way around; if ITER_BVEC is clear then we use i->bvec, when we should be using i->iov. This fixes it. In my case, the symptom that this caused was that a KVM guest doing filesystem operations on a virtual disk would result in one of qemu's threads on the host going into an infinite loop in generic_perform_write(). The loop would hit the copied == 0 case and call iov_iter_single_seg_count() to reduce the number of bytes to try to process, but because of the error, iov_iter_single_seg_count() would just return i->count and the loop made no progress and continued forever. Cc: stable@vger.kernel.org # 3.16+ Signed-off-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> | 13 November 2014, 18:28:55 UTC |
| b3ecba0 | Jeff Layton | 13 November 2014, 12:30:46 UTC | sunrpc: fix sleeping under rcu_read_lock in gss_stringify_acceptor Bruce reported that he was seeing the following BUG pop: BUG: sleeping function called from invalid context at mm/slab.c:2846 in_atomic(): 0, irqs_disabled(): 0, pid: 4539, name: mount.nfs 2 locks held by mount.nfs/4539: #0: (nfs_clid_init_mutex){+.+.+.}, at: [<ffffffffa01c0a9a>] nfs4_discover_server_trunking+0x4a/0x2f0 [nfsv4] #1: (rcu_read_lock){......}, at: [<ffffffffa00e3185>] gss_stringify_acceptor+0x5/0xb0 [auth_rpcgss] Preemption disabled at:[<ffffffff81a4f082>] printk+0x4d/0x4f CPU: 3 PID: 4539 Comm: mount.nfs Not tainted 3.18.0-rc1-00013-g5b095e9 #3393 Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 ffff880021499390 ffff8800381476a8 ffffffff81a534cf 0000000000000001 0000000000000000 ffff8800381476c8 ffffffff81097854 00000000000000d0 0000000000000018 ffff880038147718 ffffffff8118e4f3 0000000020479f00 Call Trace: [<ffffffff81a534cf>] dump_stack+0x4f/0x7c [<ffffffff81097854>] __might_sleep+0x114/0x180 [<ffffffff8118e4f3>] __kmalloc+0x1a3/0x280 [<ffffffffa00e31d8>] gss_stringify_acceptor+0x58/0xb0 [auth_rpcgss] [<ffffffffa00e3185>] ? gss_stringify_acceptor+0x5/0xb0 [auth_rpcgss] [<ffffffffa006b438>] rpcauth_stringify_acceptor+0x18/0x30 [sunrpc] [<ffffffffa01b0469>] nfs4_proc_setclientid+0x199/0x380 [nfsv4] [<ffffffffa01b04d0>] ? nfs4_proc_setclientid+0x200/0x380 [nfsv4] [<ffffffffa01bdf1a>] nfs40_discover_server_trunking+0xda/0x150 [nfsv4] [<ffffffffa01bde45>] ? nfs40_discover_server_trunking+0x5/0x150 [nfsv4] [<ffffffffa01c0acf>] nfs4_discover_server_trunking+0x7f/0x2f0 [nfsv4] [<ffffffffa01c8e24>] nfs4_init_client+0x104/0x2f0 [nfsv4] [<ffffffffa01539b4>] nfs_get_client+0x314/0x3f0 [nfs] [<ffffffffa0153780>] ? nfs_get_client+0xe0/0x3f0 [nfs] [<ffffffffa01c83aa>] nfs4_set_client+0x8a/0x110 [nfsv4] [<ffffffffa0069708>] ? __rpc_init_priority_wait_queue+0xa8/0xf0 [sunrpc] [<ffffffffa01c9b2f>] nfs4_create_server+0x12f/0x390 [nfsv4] [<ffffffffa01c1472>] nfs4_remote_mount+0x32/0x60 [nfsv4] [<ffffffff81196489>] mount_fs+0x39/0x1b0 [<ffffffff81166145>] ? __alloc_percpu+0x15/0x20 [<ffffffff811b276b>] vfs_kern_mount+0x6b/0x150 [<ffffffffa01c1396>] nfs_do_root_mount+0x86/0xc0 [nfsv4] [<ffffffffa01c1784>] nfs4_try_mount+0x44/0xc0 [nfsv4] [<ffffffffa01549b7>] ? get_nfs_version+0x27/0x90 [nfs] [<ffffffffa0161a2d>] nfs_fs_mount+0x47d/0xd60 [nfs] [<ffffffff81a59c5e>] ? mutex_unlock+0xe/0x10 [<ffffffffa01606a0>] ? nfs_remount+0x430/0x430 [nfs] [<ffffffffa01609c0>] ? nfs_clone_super+0x140/0x140 [nfs] [<ffffffff81196489>] mount_fs+0x39/0x1b0 [<ffffffff81166145>] ? __alloc_percpu+0x15/0x20 [<ffffffff811b276b>] vfs_kern_mount+0x6b/0x150 [<ffffffff811b5830>] do_mount+0x210/0xbe0 [<ffffffff811b54ca>] ? copy_mount_options+0x3a/0x160 [<ffffffff811b651f>] SyS_mount+0x6f/0xb0 [<ffffffff81a5c852>] system_call_fastpath+0x12/0x17 Sleeping under the rcu_read_lock is bad. This patch fixes it by dropping the rcu_read_lock before doing the allocation and then reacquiring it and redoing the dereference before doing the copy. If we find that the string has somehow grown in the meantime, we'll reallocate and try again. Cc: <stable@vger.kernel.org> # v3.17+ Reported-by: "J. Bruce Fields" <bfields@fieldses.org> Signed-off-by: Jeff Layton <jlayton@primarydata.com> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com> | 13 November 2014, 18:15:49 UTC |
