e7820e3 | Eric Dumazet | 21 November 2014, 19:47:16 UTC | net: Revert "net: avoid one atomic operation in skb_clone()" Not sure what I was thinking, but doing anything after releasing a refcount is suicidal or/and embarrassing. By the time we set skb->fclone to SKB_FCLONE_FREE, another cpu could have released last reference and freed whole skb. We potentially corrupt memory or trap if CONFIG_DEBUG_PAGEALLOC is set. Reported-by: Chris Mason <clm@fb.com> Fixes: ce1a4ea3f1258 ("net: avoid one atomic operation in skb_clone()") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: David S. Miller <davem@davemloft.net> | 21 November 2014, 20:26:32 UTC |
892d6eb | Jason Wang | 20 November 2014, 09:03:05 UTC | virtio-net: validate features during probe We currently trigger BUG when VIRTIO_NET_F_CTRL_VQ is not set but one of features depending on it is. That's not a friendly way to report errors to hypervisors. Let's check, and fail probe instead. Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Cornelia Huck <cornelia.huck@de.ibm.com> Cc: Wanlong Gao <gaowanlong@cn.fujitsu.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 21 November 2014, 05:26:43 UTC |
7e09dcc | David S. Miller | 21 November 2014, 05:12:39 UTC | Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf Pablo Neira Ayuso says: ==================== Netfilter fixes for net The following patchset contains two bugfixes for your net tree, they are: 1) Validate netlink group from nfnetlink to avoid an out of bound array access. This should only happen with superuser priviledges though. Discovered by Andrey Ryabinin using trinity. 2) Don't push ethernet header before calling the netfilter output hook for multicast traffic, this breaks ebtables since it expects to see skb->data pointing to the network header, patch from Linus Luessing. ==================== Signed-off-by: David S. Miller <davem@davemloft.net> | 21 November 2014, 05:12:39 UTC |
c857781 | David S. Miller | 21 November 2014, 05:07:51 UTC | Merge tag 'master-2014-11-20' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless John W. Linville says: ==================== pull request: wireless 2014-11-20 Please full this little batch of fixes intended for the 3.18 stream! For the mac80211 patch, Johannes says: "Here's another last minute fix, for minstrel HT crashing depending on the value of some uninitialised stack." On top of that... Ben Greear fixes an ath9k regression in which a BSSID mask is miscalculated. Dmitry Torokhov corrects an error handling routing in brcmfmac which was checking an unsigned variable for a negative value. Johannes Berg avoids a build problem in brcmfmac for arches where linux/unaligned/access_ok.h and asm/unaligned.h conflict. Mathy Vanhoef addresses another brcmfmac issue so as to eliminate a use-after-free of the URB transfer buffer if a timeout occurs. Please let me know if there are problems! ==================== Signed-off-by: David S. Miller <davem@davemloft.net> | 21 November 2014, 05:07:51 UTC |
17544e2 | Anish Bhatt | 21 November 2014, 01:11:46 UTC | cxgb4 : Fix DCB priority groups being returned in wrong order Peer priority groups were being reversed, but this was missed in the previous fix sent out for this issue. v2 : Previous patch was doing extra unnecessary work, result is the same. Please ignore previous patch Fixes : ee7bc3cdc270 ('cxgb4 : dcb open-lldp interop fixes') Signed-off-by: Anish Bhatt <anish@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 21 November 2014, 05:05:55 UTC |
0146240 | Jiri Bohac | 19 November 2014, 22:05:49 UTC | ipx: fix locking regression in ipx_sendmsg and ipx_recvmsg This fixes an old regression introduced by commit b0d0d915 (ipx: remove the BKL). When a recvmsg syscall blocks waiting for new data, no data can be sent on the same socket with sendmsg because ipx_recvmsg() sleeps with the socket locked. This breaks mars-nwe (NetWare emulator): - the ncpserv process reads the request using recvmsg - ncpserv forks and spawns nwconn - ncpserv calls a (blocking) recvmsg and waits for new requests - nwconn deadlocks in sendmsg on the same socket Commit b0d0d915 has simply replaced BKL locking with lock_sock/release_sock. Unlike now, BKL got unlocked while sleeping, so a blocking recvmsg did not block a concurrent sendmsg. Only keep the socket locked while actually working with the socket data and release it prior to calling skb_recv_datagram(). Signed-off-by: Jiri Bohac <jbohac@suse.cz> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net> | 21 November 2014, 03:57:03 UTC |
d3052bb | Joe Stringer | 19 November 2014, 21:54:49 UTC | openvswitch: Don't validate IPv6 label masks. When userspace doesn't provide a mask, OVS datapath generates a fully unwildcarded mask for the flow by copying the flow and setting all bits in all fields. For IPv6 label, this creates a mask that matches on the upper 12 bits, causing the following error: openvswitch: netlink: Invalid IPv6 flow label value (value=ffffffff, max=fffff) This patch ignores the label validation check for masks, avoiding this error. Signed-off-by: Joe Stringer <joestringer@nicira.com> Acked-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 21 November 2014, 03:56:13 UTC |
a5f6fc2 | Mathias Krause | 19 November 2014, 17:05:26 UTC | pptp: fix stack info leak in pptp_getname() pptp_getname() only partially initializes the stack variable sa, particularly only fills the pptp part of the sa_addr union. The code thereby discloses 16 bytes of kernel stack memory via getsockname(). Fix this by memset(0)'ing the union before. Cc: Dmitry Kozlov <xeb@mail.ru> Signed-off-by: Mathias Krause <minipli@googlemail.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 21 November 2014, 03:43:47 UTC |
a1d69c6 | Johannes Berg | 19 November 2014, 21:13:10 UTC | brcmfmac: don't include linux/unaligned/access_ok.h This is a specific implementation, <asm/unaligned.h> is the multiplexer that has the arch-specific knowledge of which of the implementations needs to be used, so include that. This issue was revealed by kbuild testing when <asm/unaligned.h> was added in <linux/ieee80211.h> resulting in redefinition of get_unaligned_be16 (and probably others). Cc: stable@vger.kernel.org # v3.17 Reported-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> | 20 November 2014, 19:46:45 UTC |
ee7255a | Anish Bhatt | 19 November 2014, 03:09:51 UTC | cxgb4i : Don't block unload/cxgb4 unload when remote closes TCP connection cxgb4i was returning wrong error and not releasing module reference if remote end abruptly closed TCP connection. This prevents the cxgb4 network module from being unloaded, further affecting other network drivers dependent on cxgb4 Sending to net as this affects all cxgb4 based network drivers. Signed-off-by: Anish Bhatt <anish@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 19 November 2014, 21:59:26 UTC |
ffb1388 | Duan Jiong | 19 November 2014, 01:35:39 UTC | ipv6: delete protocol and unregister rtnetlink when cleanup pim6_protocol was added when initiation, but it not deleted. Similarly, unregister RTNL_FAMILY_IP6MR rtnetlink. Signed-off-by: Duan Jiong <duanj.fnst@cn.fujitsu.com> Reviewed-by: Cong Wang <cwang@twopensource.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 19 November 2014, 21:56:17 UTC |
6158fb3 | John W. Linville | 19 November 2014, 20:44:40 UTC | Merge tag 'mac80211-for-john-2014-11-18' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211 Johannes Berg <johannes@sipsolutions.net> says: "Here's another last minute fix, for minstrel HT crashing depending on the value of some uninitialised stack." Signed-off-by: John W. Linville <linville@tuxdriver.com> | 19 November 2014, 20:44:40 UTC |
ddecab1 | David S. Miller | 19 November 2014, 20:28:58 UTC | Merge tag 'linux-can-fixes-for-3.18-20141118' of git://gitorious.org/linux-can/linux-can Marc Kleine-Budde says: ==================== pull-request: can 2014-11-18 this is a pull request of 17 patches for net/master for the v3.18 release cycle. The last patch of this pull request ("can: m_can: update to support CAN FD features") adds, as the description says, a new feature to the m_can driver. As the m_can driver has been added in v3.18 there is no risk of causing a regression. Give me a note if this is not okay and I'll create a new pull request without it. There is a patch for the CAN infrastructure by Thomas Körper which fixes calling kfree_skb() from interrupt context. Roman Fietze fixes a typo also in the infrastructure. A patch by Dong Aisheng adds a generic helper function to tell if a skb is normal CAN or CAN-FD frame. Alexey Khoroshilov of the Linux Driver Verification project fixes a memory leak in the esd_usb2 driver. Two patches by Sudip Mukherjee remove unused variables and fixe the signess of a variable. Three patches by me add the missing .ndo_change_mtu callback to the xilinx_can, rcar_can and gs_usb driver. The remaining patches improve the m_can driver: David Cohen adds the missing CONFIG_HAS_IOMEM dependency. Dong Aisheng provides 6 bugfix patches (most important: missing RAM init, sleep in NAPI poll, dlc in RTR). While the last of his patches adds CAN FD support to the driver. ==================== Signed-off-by: David S. Miller <davem@davemloft.net> | 19 November 2014, 20:28:58 UTC |
9737c6a | Or Gerlitz | 18 November 2014, 15:51:27 UTC | net/mlx4_en: Add VXLAN ndo calls to the PF net device ops too This is currently missing, which results in a crash when one attempts to set VXLAN tunnel over the mlx4_en when acting as PF. [ 2408.785472] BUG: unable to handle kernel NULL pointer dereference at (null) [...] [ 2408.994104] Call Trace: [ 2408.996584] [<ffffffffa021f7f5>] ? vxlan_get_rx_port+0xd6/0x103 [vxlan] [ 2409.003316] [<ffffffffa021f71f>] ? vxlan_lowerdev_event+0xf2/0xf2 [vxlan] [ 2409.010225] [<ffffffffa0630358>] mlx4_en_start_port+0x862/0x96a [mlx4_en] [ 2409.017132] [<ffffffffa063070f>] mlx4_en_open+0x17f/0x1b8 [mlx4_en] While here, make sure to invoke vxlan_get_rx_port() only when VXLAN offloads are actually enabled and not when they are only supported. Reported-by: Ido Shamay <idos@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 19 November 2014, 20:11:09 UTC |
b8e4500 | Nikolay Aleksandrov | 18 November 2014, 14:14:44 UTC | bonding: fix curr_active_slave/carrier with loadbalance arp monitoring Since commit 6fde8f037e60 ("bonding: fix locking in bond_loadbalance_arp_mon()") we can have a stale bond carrier state and stale curr_active_slave when using arp monitoring in loadbalance modes. The reason is that in bond_loadbalance_arp_mon() we can't have do_failover == true but slave_state_changed == false, whenever do_failover is true then slave_state_changed is also true. Then the following piece from bond_loadbalance_arp_mon(): if (slave_state_changed) { bond_slave_state_change(bond); if (BOND_MODE(bond) == BOND_MODE_XOR) bond_update_slave_arr(bond, NULL); } else if (do_failover) { block_netpoll_tx(); bond_select_active_slave(bond); unblock_netpoll_tx(); } will execute only the first branch, always and regardless of do_failover. Since these two events aren't related in such way, we need to decouple and consider them separately. For example this issue could lead to the following result: Bonding Mode: load balancing (round-robin) *MII Status: down* MII Polling Interval (ms): 0 Up Delay (ms): 0 Down Delay (ms): 0 ARP Polling Interval (ms): 100 ARP IP target/s (n.n.n.n form): 192.168.9.2 Slave Interface: ens12 *MII Status: up* Speed: 10000 Mbps Duplex: full Link Failure Count: 2 Permanent HW addr: 00:0f:53:01:42:2c Slave queue ID: 0 Slave Interface: eth1 *MII Status: up* Speed: Unknown Duplex: Unknown Link Failure Count: 70 Permanent HW addr: 52:54:00:2f:0f:8e Slave queue ID: 0 Since some interfaces are up, then the status of the bond should also be up, but it will never change unless something invokes bond_set_carrier() (i.e. enslave, bond_select_active_slave etc). Now, if I force the calling of bond_select_active_slave via for example changing primary_reselect (it can change in any mode), then the MII status goes to "up" because it calls bond_select_active_slave() which should've been done from bond_loadbalance_arp_mon() itself. CC: Veaceslav Falico <vfalico@gmail.com> CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> CC: Ding Tianhong <dingtianhong@huawei.com> Fixes: 6fde8f037e60 ("bonding: fix locking in bond_loadbalance_arp_mon()") Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Acked-by: Veaceslav Falico <vfalico@gmail.com> Acked-by: Andy Gospodarek <gospo@cumulusnetworks.com> Acked-by: Ding Tianhong <dingtianhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 19 November 2014, 20:09:04 UTC |
280ba51 | Felix Fietkau | 18 November 2014, 21:35:31 UTC | mac80211: minstrel_ht: fix a crash in rate sorting The commit 5935839ad73583781b8bbe8d91412f6826e218a4 "mac80211: improve minstrel_ht rate sorting by throughput & probability" introduced a crash on rate sorting that occurs when the rate added to the sorting array is faster than all the previous rates. Due to an off-by-one error, it reads the rate index from tp_list[-1], which contains uninitialized stack garbage, and then uses the resulting index for accessing the group rate stats, leading to a crash if the garbage value is big enough. Cc: Thomas Huehn <thomas@net.t-labs.tu-berlin.de> Reported-by: Jouni Malinen <j@w1.fi> Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com> | 18 November 2014, 21:39:16 UTC |
11bf782 | Joe Stringer | 18 November 2014, 00:24:54 UTC | vxlan: Inline vxlan_gso_check(). Suggested-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Joe Stringer <joestringer@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 18 November 2014, 20:38:44 UTC |
8064673 | Dong Aisheng | 18 November 2014, 11:00:55 UTC | can: m_can: update to support CAN FD features Bosch M_CAN is CAN FD capable device. This patch implements the CAN FD features include up to 64 bytes payload and bitrate switch function. 1) Change the Rx FIFO and Tx Buffer to 64 bytes for support CAN FD up to 64 bytes payload. It's backward compatible with old 8 bytes normal CAN frame. 2) Allocate can frame or canfd frame based on EDL bit 3) Bitrate Switch function is disabled by default and will be enabled according to CANFD_BRS bit in cf->flags. Acked-by: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: Dong Aisheng <b29396@freescale.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> | 18 November 2014, 20:35:06 UTC |
a93f5ca | Dong Aisheng | 29 October 2014, 10:45:22 UTC | can: m_can: fix incorrect error messages Fix a few error messages. Signed-off-by: Dong Aisheng <b29396@freescale.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> | 18 November 2014, 20:35:05 UTC |
7660f63 | Dong Aisheng | 29 October 2014, 10:45:24 UTC | can: m_can: add missing delay after setting CCCR_INIT bit The spec mentions there may be a delay until the value written to INIT can be read back due to the synchronization mechanism between the two clock domains. But it does not indicate the exact clock cycles needed. The 5us delay is a test value and seems ok. Without the delay, CCCR.CCE bit may fail to be set and then the initialization fail sometimes when do repeatly up and down. Signed-off-by: Dong Aisheng <b29396@freescale.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> | 18 November 2014, 20:35:05 UTC |
921f168 | Dong Aisheng | 18 November 2014, 11:00:54 UTC | can: m_can: fix not set can_dlc for remote frame The original code missed to set the cf->can_dlc in the RTR case, so add it. Signed-off-by: Dong Aisheng <b29396@freescale.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> | 18 November 2014, 20:35:04 UTC |
f6a9964 | Dong Aisheng | 29 October 2014, 10:45:21 UTC | can: m_can: fix possible sleep in napi poll The m_can_get_berr_counter function can sleep and it may be called in napi poll function. Rework it to fix the following warning. root@imx6qdlsolo:~# cangen can0 -f -L 12 -D 112233445566778899001122 [ 1846.017565] m_can 20e8000.can can0: entered error warning state [ 1846.023551] ------------[ cut here ]------------ [ 1846.028216] WARNING: CPU: 0 PID: 560 at kernel/locking/mutex.c:867 mutex_trylock+0x218/0x23c() [ 1846.036889] DEBUG_LOCKS_WARN_ON(in_interrupt()) [ 1846.041263] Modules linked in: [ 1846.044594] CPU: 0 PID: 560 Comm: cangen Not tainted 3.17.0-rc4-next-20140915-00010-g032d018-dirty #477 [ 1846.054033] Backtrace: [ 1846.056557] [<80012448>] (dump_backtrace) from [<80012728>] (show_stack+0x18/0x1c) [ 1846.064180] r6:809a07ec r5:809a07ec r4:00000000 r3:00000000 [ 1846.069966] [<80012710>] (show_stack) from [<806c9ee0>] (dump_stack+0x8c/0xa4) [ 1846.077264] [<806c9e54>] (dump_stack) from [<8002aa78>] (warn_slowpath_common+0x70/0x94) [ 1846.085403] r6:806cd1b0 r5:00000009 r4:be1d5c20 r3:be07b0c0 [ 1846.091204] [<8002aa08>] (warn_slowpath_common) from [<8002aad4>] (warn_slowpath_fmt+0x38/0x40) [ 1846.099951] r8:8119106c r7:80515aa4 r6:be027000 r5:00000001 r4:809d1df4 [ 1846.106830] [<8002aaa0>] (warn_slowpath_fmt) from [<806cd1b0>] (mutex_trylock+0x218/0x23c) [ 1846.115141] r3:80851c88 r2:8084fb74 [ 1846.118804] [<806ccf98>] (mutex_trylock) from [<80515aa4>] (clk_prepare_lock+0x14/0xf4) [ 1846.126859] r8:00000040 r7:be1d5cec r6:be027000 r5:be255800 r4:be027000 [ 1846.133737] [<80515a90>] (clk_prepare_lock) from [<80517660>] (clk_prepare+0x14/0x2c) [ 1846.141583] r5:be255800 r4:be027000 [ 1846.145272] [<8051764c>] (clk_prepare) from [<8041ff14>] (m_can_get_berr_counter+0x20/0xd4) [ 1846.153672] r4:be255800 r3:be07b0c0 [ 1846.157325] [<8041fef4>] (m_can_get_berr_counter) from [<80420428>] (m_can_poll+0x310/0x8fc) [ 1846.165809] r7:bd4dc540 r6:00000744 r5:11300000 r4:be255800 [ 1846.171590] [<80420118>] (m_can_poll) from [<8056a468>] (net_rx_action+0xcc/0x1b4) [ 1846.179204] r10:00000101 r9:be255ebc r8:00000040 r7:be7c3208 r6:8097c100 r5:be7c3200 [ 1846.187192] r4:0000012c [ 1846.189779] [<8056a39c>] (net_rx_action) from [<8002deec>] (__do_softirq+0xfc/0x2c4) [ 1846.197568] r10:00000101 r9:8097c088 r8:00000003 r7:8097c080 r6:40000001 r5:8097c08c [ 1846.205559] r4:00000020 [ 1846.208144] [<8002ddf0>] (__do_softirq) from [<8002e194>] (do_softirq+0x7c/0x88) [ 1846.215588] r10:00000000 r9:bd516a60 r8:be18ce00 r7:00000000 r6:be255800 r5:8056c0ec [ 1846.223578] r4:60000093 [ 1846.226163] [<8002e118>] (do_softirq) from [<8002e288>] (__local_bh_enable_ip+0xe8/0x10c) [ 1846.234386] r4:00000200 r3:be1d4000 [ 1846.238036] [<8002e1a0>] (__local_bh_enable_ip) from [<8056c108>] (__dev_queue_xmit+0x314/0x6b0) [ 1846.246868] r6:be255800 r5:bd516a00 r4:00000000 r3:be07b0c0 [ 1846.252645] [<8056bdf4>] (__dev_queue_xmit) from [<8056c4b8>] (dev_queue_xmit+0x14/0x18) Signed-off-by: Dong Aisheng <b29396@freescale.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> | 18 November 2014, 20:35:03 UTC |
962845d | Dong Aisheng | 07 November 2014, 08:45:14 UTC | can: m_can: add missing message RAM initialization The M_CAN message RAM is usually equipped with a parity or ECC functionality. But RAM cells suffer a hardware reset and can therefore hold arbitrary content at startup - including parity and/or ECC bits. To prevent the M_CAN controller detecting checksum errors when reading potentially uninitialized TX message RAM content to transmit CAN frames the TX message RAM has to be written with (any kind of) initial data. Signed-off-by: Dong Aisheng <b29396@freescale.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> | 18 November 2014, 20:35:03 UTC |
efe2228 | David Cohen | 15 October 2014, 21:41:50 UTC | can: m_can: add CONFIG_HAS_IOMEM dependence m_can uses io memory which makes it not compilable on architectures without HAS_IOMEM such as UML: drivers/built-in.o: In function `m_can_plat_probe': m_can.c:(.text+0x218cc5): undefined reference to `devm_ioremap_resource' m_can.c:(.text+0x218df9): undefined reference to `devm_ioremap' Signed-off-by: David Cohen <david.a.cohen@linux.intel.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> | 18 November 2014, 20:35:02 UTC |
d6fdb38 | Dong Aisheng | 29 October 2014, 10:45:23 UTC | can: m_can: add .ndo_change_mtu function Use common can_change_mtu function. Signed-off-by: Dong Aisheng <b29396@freescale.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> | 18 November 2014, 20:35:02 UTC |
50212b4 | Marc Kleine-Budde | 18 November 2014, 12:16:13 UTC | can: gs_usb: add .ndo_change_mtu function Use common can_change_mtu function. Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> | 18 November 2014, 20:34:59 UTC |
ca976d6 | Marc Kleine-Budde | 18 November 2014, 12:16:13 UTC | can: rcar_can: add .ndo_change_mtu function Use common can_change_mtu function. Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> | 18 November 2014, 16:52:08 UTC |
92593a0 | Marc Kleine-Budde | 18 November 2014, 12:16:13 UTC | can: xilinx_can: add .ndo_change_mtu function Use common can_change_mtu function. Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> | 18 November 2014, 16:52:08 UTC |
fb3ec7b | Sudip Mukherjee | 18 November 2014, 13:47:07 UTC | can: xilinx_can: fix comparison of unsigned variable The variable err was of the type u32. It was being compared with < 0, and being an unsigned variable the comparison would have been always false. Moreover, err was getting the return value from set_reset_mode() and xcan_set_bittiming(), and both are returning int. Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org> Reviewed-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> | 18 November 2014, 16:47:49 UTC |
4e2061b | Sudip Mukherjee | 18 November 2014, 13:47:06 UTC | can: remove unused variable these variable were only assigned some values, but then never reused again. so they are safe to be removed. Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> | 18 November 2014, 15:52:18 UTC |
efbd50d | Alexey Khoroshilov | 10 October 2014, 20:31:07 UTC | can: esd_usb2: fix memory leak on disconnect It seems struct esd_usb2 dev is not deallocated on disconnect. The patch adds the missing deallocation. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru> Acked-by: Matthias Fuchs <matthias.fuchs@esd.eu> Cc: linux-stable <stable@vger.kernel.org> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> | 18 November 2014, 12:23:31 UTC |
98e6901 | Dong Aisheng | 07 November 2014, 08:45:12 UTC | can: dev: add can_is_canfd_skb() API The CAN device drivers can use can_is_canfd_skb() to check if the frame to send is on CAN FD mode or normal CAN mode. Acked-by: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: Dong Aisheng <b29396@freescale.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> | 18 November 2014, 12:23:31 UTC |
67b5909 | Roman Fietze | 20 October 2014, 08:32:42 UTC | can: dev: fix typo CIA -> CiA, CAN in Automation This patch fixes a typo in CAN's dev.c: CIA -> CiA which stands for CAN in Automation. Signed-off-by: Roman Fietze <roman.fietze@telemotive.de> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> | 18 November 2014, 12:23:30 UTC |
5247a58 | Thomas Körper | 31 October 2014, 06:33:54 UTC | can: dev: avoid calling kfree_skb() from interrupt context ikfree_skb() is Called in can_free_echo_skb(), which might be called from (TX Error) interrupt, which triggers the folloing warning: [ 1153.360705] ------------[ cut here ]------------ [ 1153.360715] WARNING: CPU: 0 PID: 31 at net/core/skbuff.c:563 skb_release_head_state+0xb9/0xd0() [ 1153.360772] Call Trace: [ 1153.360778] [<c167906f>] dump_stack+0x41/0x52 [ 1153.360782] [<c105bb7e>] warn_slowpath_common+0x7e/0xa0 [ 1153.360784] [<c158b909>] ? skb_release_head_state+0xb9/0xd0 [ 1153.360786] [<c158b909>] ? skb_release_head_state+0xb9/0xd0 [ 1153.360788] [<c105bc42>] warn_slowpath_null+0x22/0x30 [ 1153.360791] [<c158b909>] skb_release_head_state+0xb9/0xd0 [ 1153.360793] [<c158be90>] skb_release_all+0x10/0x30 [ 1153.360795] [<c158bf06>] kfree_skb+0x36/0x80 [ 1153.360799] [<f8486938>] ? can_free_echo_skb+0x28/0x40 [can_dev] [ 1153.360802] [<f8486938>] can_free_echo_skb+0x28/0x40 [can_dev] [ 1153.360805] [<f849a12c>] esd_pci402_interrupt+0x34c/0x57a [esd402] [ 1153.360809] [<c10a75b5>] handle_irq_event_percpu+0x35/0x180 [ 1153.360811] [<c10a7623>] ? handle_irq_event_percpu+0xa3/0x180 [ 1153.360813] [<c10a7731>] handle_irq_event+0x31/0x50 [ 1153.360816] [<c10a9c7f>] handle_fasteoi_irq+0x6f/0x120 [ 1153.360818] [<c10a9c10>] ? handle_edge_irq+0x110/0x110 [ 1153.360822] [<c1011b61>] handle_irq+0x71/0x90 [ 1153.360823] <IRQ> [<c168152c>] do_IRQ+0x3c/0xd0 [ 1153.360829] [<c1680b6c>] common_interrupt+0x2c/0x34 [ 1153.360834] [<c107d277>] ? finish_task_switch+0x47/0xf0 [ 1153.360836] [<c167c27b>] __schedule+0x35b/0x7e0 [ 1153.360839] [<c10a5334>] ? console_unlock+0x2c4/0x4d0 [ 1153.360842] [<c13df500>] ? n_tty_receive_buf_common+0x890/0x890 [ 1153.360845] [<c10707b6>] ? process_one_work+0x196/0x370 [ 1153.360847] [<c167c723>] schedule+0x23/0x60 [ 1153.360849] [<c1070de1>] worker_thread+0x161/0x460 [ 1153.360852] [<c1090fcf>] ? __wake_up_locked+0x1f/0x30 [ 1153.360854] [<c1070c80>] ? rescuer_thread+0x2f0/0x2f0 [ 1153.360856] [<c1074f01>] kthread+0xa1/0xc0 [ 1153.360859] [<c1680401>] ret_from_kernel_thread+0x21/0x30 [ 1153.360861] [<c1074e60>] ? kthread_create_on_node+0x110/0x110 [ 1153.360863] ---[ end trace 5ff83639cbb74b35 ]--- This patch replaces the kfree_skb() by dev_kfree_skb_any(). Signed-off-by: Thomas Körper <thomas.koerper@esd.eu> Cc: linux-stable <stable@vger.kernel.org> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> | 18 November 2014, 12:23:30 UTC |
4c69f05 | Dmitry Torokhov | 14 November 2014, 22:12:21 UTC | brcmfmac: fix error handling of irq_of_parse_and_map Return value of irq_of_parse_and_map() is unsigned int, with 0 indicating failure, so testing for negative result never works. Signed-off-by: Dmitry Torokhov <dtor@chromium.org> Cc: stable@vger.kernel.org # v3.17 Acked-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> | 17 November 2014, 20:04:04 UTC |
8180bd4 | Mathy Vanhoef | 13 November 2014, 02:33:34 UTC | brcmfmac: kill URB when request timed out Kill the submitted URB in brcmf_usb_dl_cmd if the request timed out. This assures the URB is never submitted twice. It also prevents a possible use-after-free of the URB transfer buffer if a timeout occurs. Signed-off-by: Mathy Vanhoef <vanhoefm@gmail.com> Acked-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> | 17 November 2014, 20:04:04 UTC |
daad166 | Ben Greear | 04 November 2014, 23:22:50 UTC | ath9k: fix regression in bssidmask calculation The commit that went into 3.17: ath9k: Summarize hw state per channel context Group and set hw state (opmode, primary_sta, beacon conf) per channel context instead of whole list of vifs. This would allow each channel context to run in different mode (STA/AP). Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> broke multi-vif configuration due to not properly calculating the bssid mask. The test case that caught this was: create wlan0 and sta0-4 (6 total), not sure how much that matters. associate all 6 (works fine) disconnect 5 of them, leaving sta0 up Start trying to bring up the other 5 one at a time. It will fail, with iw events looking like this (in these logs, several sta are trying to come up, but symptom is the same with just one) The patch causing the regression made quite a few changes, but the part I think caused this particular problem was not recalculating the bssid mask when adding and removing interfaces. Re-adding those calls fixes my test case. Fix bad comment as well. Signed-off-by: Ben Greear <greearb@candelatech.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> | 17 November 2014, 20:02:52 UTC |
f0b4eec | Linus Lüssing | 17 November 2014, 11:20:28 UTC | bridge: fix netfilter/NF_BR_LOCAL_OUT for own, locally generated queries Ebtables on the OUTPUT chain (NF_BR_LOCAL_OUT) would not work as expected for both locally generated IGMP and MLD queries. The IP header specific filter options are off by 14 Bytes for netfilter (actual output on interfaces is fine). NF_HOOK() expects the skb->data to point to the IP header, not the ethernet one (while dev_queue_xmit() does not). Luckily there is an br_dev_queue_push_xmit() helper function already - let's just use that. Introduced by eb1d16414339a6e113d89e2cca2556005d7ce919 ("bridge: Add core IGMP snooping support") Ebtables example: $ ebtables -I OUTPUT -p IPv6 -o eth1 --logical-out br0 \ --log --log-level 6 --log-ip6 --log-prefix="~EBT: " -j DROP before (broken): ~EBT: IN= OUT=eth1 MAC source = 02:04:64:a4:39:c2 \ MAC dest = 33:33:00:00:00:01 proto = 0x86dd IPv6 \ SRC=64a4:39c2:86dd:6000:0000:0020:0001:fe80 IPv6 \ DST=0000:0000:0000:0004:64ff:fea4:39c2:ff02, \ IPv6 priority=0x3, Next Header=2 after (working): ~EBT: IN= OUT=eth1 MAC source = 02:04:64:a4:39:c2 \ MAC dest = 33:33:00:00:00:01 proto = 0x86dd IPv6 \ SRC=fe80:0000:0000:0000:0004:64ff:fea4:39c2 IPv6 \ DST=ff02:0000:0000:0000:0000:0000:0000:0001, \ IPv6 priority=0x0, Next Header=0 Signed-off-by: Linus Lüssing <linus.luessing@web.de> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> | 17 November 2014, 11:38:02 UTC |
97840cb | Pablo Neira Ayuso | 14 November 2014, 17:14:33 UTC | netfilter: nfnetlink: fix insufficient validation in nfnetlink_bind Make sure the netlink group exists, otherwise you can trigger an out of bound array memory access from the netlink_bind() path. This splat can only be triggered only by superuser. [ 180.203600] UBSan: Undefined behaviour in ../net/netfilter/nfnetlink.c:467:28 [ 180.204249] index 9 is out of range for type 'int [9]' [ 180.204697] CPU: 0 PID: 1771 Comm: trinity-main Not tainted 3.18.0-rc4-mm1+ #122 [ 180.205365] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.7.5-0-ge51488c-20140602_164612-nilsson.home.kraxel.org +04/01/2014 [ 180.206498] 0000000000000018 0000000000000000 0000000000000009 ffff88007bdf7da8 [ 180.207220] ffffffff82b0ef5f 0000000000000092 ffffffff845ae2e0 ffff88007bdf7db8 [ 180.207887] ffffffff8199e489 ffff88007bdf7e18 ffffffff8199ea22 0000003900000000 [ 180.208639] Call Trace: [ 180.208857] dump_stack (lib/dump_stack.c:52) [ 180.209370] ubsan_epilogue (lib/ubsan.c:174) [ 180.209849] __ubsan_handle_out_of_bounds (lib/ubsan.c:400) [ 180.210512] nfnetlink_bind (net/netfilter/nfnetlink.c:467) [ 180.210986] netlink_bind (net/netlink/af_netlink.c:1483) [ 180.211495] SYSC_bind (net/socket.c:1541) Moreover, define the missing nf_tables and nf_acct multicast groups too. Reported-by: Andrey Ryabinin <a.ryabinin@samsung.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> | 17 November 2014, 11:01:13 UTC |
feb91a0 | Daniel Borkmann | 05 November 2014, 19:27:38 UTC | ipv6: mld: fix add_grhead skb_over_panic for devs with large MTUs It has been reported that generating an MLD listener report on devices with large MTUs (e.g. 9000) and a high number of IPv6 addresses can trigger a skb_over_panic(): skbuff: skb_over_panic: text:ffffffff80612a5d len:3776 put:20 head:ffff88046d751000 data:ffff88046d751010 tail:0xed0 end:0xec0 dev:port1 ------------[ cut here ]------------ kernel BUG at net/core/skbuff.c:100! invalid opcode: 0000 [#1] SMP Modules linked in: ixgbe(O) CPU: 3 PID: 0 Comm: swapper/3 Tainted: G O 3.14.23+ #4 [...] Call Trace: <IRQ> [<ffffffff80578226>] ? skb_put+0x3a/0x3b [<ffffffff80612a5d>] ? add_grhead+0x45/0x8e [<ffffffff80612e3a>] ? add_grec+0x394/0x3d4 [<ffffffff80613222>] ? mld_ifc_timer_expire+0x195/0x20d [<ffffffff8061308d>] ? mld_dad_timer_expire+0x45/0x45 [<ffffffff80255b5d>] ? call_timer_fn.isra.29+0x12/0x68 [<ffffffff80255d16>] ? run_timer_softirq+0x163/0x182 [<ffffffff80250e6f>] ? __do_softirq+0xe0/0x21d [<ffffffff8025112b>] ? irq_exit+0x4e/0xd3 [<ffffffff802214bb>] ? smp_apic_timer_interrupt+0x3b/0x46 [<ffffffff8063f10a>] ? apic_timer_interrupt+0x6a/0x70 mld_newpack() skb allocations are usually requested with dev->mtu in size, since commit 72e09ad107e7 ("ipv6: avoid high order allocations") we have changed the limit in order to be less likely to fail. However, in MLD/IGMP code, we have some rather ugly AVAILABLE(skb) macros, which determine if we may end up doing an skb_put() for adding another record. To avoid possible fragmentation, we check the skb's tailroom as skb->dev->mtu - skb->len, which is a wrong assumption as the actual max allocation size can be much smaller. The IGMP case doesn't have this issue as commit 57e1ab6eaddc ("igmp: refine skb allocations") stores the allocation size in the cb[]. Set a reserved_tailroom to make it fit into the MTU and use skb_availroom() helper instead. This also allows to get rid of igmp_skb_size(). Reported-by: Wei Liu <lw1a2.jing@gmail.com> Fixes: 72e09ad107e7 ("ipv6: avoid high order allocations") Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Cc: Eric Dumazet <edumazet@google.com> Cc: Hannes Frederic Sowa <hannes@stressinduktion.org> Cc: David L Stevens <david.stevens@oracle.com> Acked-by: Eric Dumazet <edumazet@google.com> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net> | 16 November 2014, 21:55:06 UTC |
bb2bdeb | Martin Hauke | 16 November 2014, 18:55:25 UTC | qmi_wwan: Add support for HP lt4112 LTE/HSPA+ Gobi 4G Modem Added the USB VID/PID for the HP lt4112 LTE/HSPA+ Gobi 4G Modem (Huawei me906e) Signed-off-by: Martin Hauke <mardnh@gmx.de> Acked-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net> | 16 November 2014, 21:04:09 UTC |
c6ab766 | David S. Miller | 16 November 2014, 19:59:01 UTC | Merge branch 'net_ovs' of git://git.kernel.org/pub/scm/linux/kernel/git/pshelar/openvswitch Pravin B Shelar says: ==================== Open vSwitch Following fixes are accumulated in ovs-repo. Three of them are related to protocol processing, one is related to memory leak in case of error and one is to fix race. Patch "Validate IPv6 flow key and mask values" has conflicts with net-next, Let me know if you want me to send the patch for net-next. ==================== Signed-off-by: David S. Miller <davem@davemloft.net> | 16 November 2014, 19:59:01 UTC |
52cff74 | Anish Bhatt | 15 November 2014, 00:38:31 UTC | dcbnl : Disable software interrupts before taking dcb_lock Solves possible lockup issues that can be seen from firmware DCB agents calling into the DCB app api. DCB firmware event queues can be tied in with NAPI so that dcb events are generated in softIRQ context. This can results in calls to dcb_*app() functions which try to take the dcb_lock. If the the event triggers while we also have the dcb_lock because lldpad or some other agent happened to be issuing a get/set command we could see a cpu lockup. This code was not originally written with firmware agents in mind, hence grabbing dcb_lock from softIRQ context was not considered. Signed-off-by: Anish Bhatt <anish@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 16 November 2014, 19:50:52 UTC |
8c2dd54 | Alexey Khoroshilov | 14 November 2014, 23:11:59 UTC | ieee802154: fix error handling in ieee802154fake_probe() In case of any failure ieee802154fake_probe() just calls unregister_netdev(). But it does not look safe to unregister netdevice before it was registered. The patch implements straightforward resource deallocation in case of failure in ieee802154fake_probe(). Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru> Signed-off-by: David S. Miller <davem@davemloft.net> | 16 November 2014, 19:45:14 UTC |
f1227c5 | David S. Miller | 16 November 2014, 19:23:56 UTC | Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf Pablo Neira Ayuso says: ==================== Netfilter/IPVS fixes for net The following patchset contains Netfilter updates for your net tree, they are: 1) Fix missing initialization of the range structure (allocated in the stack) in nft_masq_{ipv4, ipv6}_eval, from Daniel Borkmann. 2) Make sure the data we receive from userspace contains the req_version structure, otherwise return an error incomplete on truncated input. From Dan Carpenter. 3) Fix handling og skb->sk which may cause incorrect handling of connections from a local process. Via Simon Horman, patch from Calvin Owens. 4) Fix wrong netns in nft_compat when setting target and match params structure. 5) Relax chain type validation in nft_compat that was recently included, this broke the matches that need to be run from the route chain type. Now iptables-test.py automated regression tests report success again and we avoid the only possible problematic case, which is the use of nat targets out of nat chain type. 6) Use match->table to validate the tablename, instead of the match->name. Again patch for nft_compat. 7) Restore the synchronous release of objects from the commit and abort path in nf_tables. This is causing two major problems: splats when using nft_compat, given that matches and targets may sleep and call_rcu is invoked from softirq context. Moreover Patrick reported possible event notification reordering when rules refer to anonymous sets. 8) Fix race condition in between packets that are being confirmed by conntrack and the ctnetlink flush operation. This happens since the removal of the central spinlock. Thanks to Jesper D. Brouer to looking into this. ==================== Signed-off-by: David S. Miller <davem@davemloft.net> | 16 November 2014, 19:23:56 UTC |
35717d8 | John Ogness | 14 November 2014, 14:42:52 UTC | drivers: net: cpsw: Fix TX_IN_SEL offset The TX_IN_SEL offset for the CPSW_PORT/TX_IN_CTL register was incorrect. This caused the Dual MAC mode to never get set when it should. It also caused possible unintentional setting of a bit in the CPSW_PORT/TX_BLKS_REM register. The purpose of setting the Dual MAC mode for this register is to: "... allow packets from both ethernet ports to be written into the FIFO without one port starving the other port." - AM335x ARM TRM Signed-off-by: John Ogness <john.ogness@linutronix.de> Reviewed-by: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 16 November 2014, 19:20:00 UTC |
9f45894 | Hannes Frederic Sowa | 14 November 2014, 14:16:47 UTC | reciprocal_div: objects with exported symbols should be obj-y rather than lib-y Otherwise the exported symbols might be discarded because of no users in vmlinux. Reported-by: Jim Davis <jim.epost@gmail.com> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net> | 16 November 2014, 19:18:53 UTC |
49dd18b | Panu Matilainen | 14 November 2014, 11:14:32 UTC | ipv4: Fix incorrect error code when adding an unreachable route Trying to add an unreachable route incorrectly returns -ESRCH if if custom FIB rules are present: [root@localhost ~]# ip route add 74.125.31.199 dev eth0 via 1.2.3.4 RTNETLINK answers: Network is unreachable [root@localhost ~]# ip rule add to 55.66.77.88 table 200 [root@localhost ~]# ip route add 74.125.31.199 dev eth0 via 1.2.3.4 RTNETLINK answers: No such process [root@localhost ~]# Commit 83886b6b636173b206f475929e58fac75c6f2446 ("[NET]: Change "not found" return value for rule lookup") changed fib_rules_lookup() to use -ESRCH as a "not found" code internally, but for user space it should be translated into -ENETUNREACH. Handle the translation centrally in ipv4-specific fib_lookup(), leaving the DECnet case alone. On a related note, commit b7a71b51ee37d919e4098cd961d59a883fd272d8 ("ipv4: removed redundant conditional") removed a similar translation from ip_route_input_slow() prematurely AIUI. Fixes: b7a71b51ee37 ("ipv4: removed redundant conditional") Signed-off-by: Panu Matilainen <pmatilai@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 16 November 2014, 19:11:45 UTC |
fecaef8 | Jarno Rajahalme | 11 November 2014, 22:36:30 UTC | openvswitch: Validate IPv6 flow key and mask values. Reject flow label key and mask values with invalid bits set. Introduced by commit 3fdbd1ce11e5 ("openvswitch: add ipv6 'set' action"). Signed-off-by: Jarno Rajahalme <jrajahalme@nicira.com> Acked-by: Jesse Gross <jesse@nicira.com> Signed-off-by: Pravin B Shelar <pshelar@nicira.com> | 14 November 2014, 23:13:26 UTC |
8ec609d | Pravin B Shelar | 11 November 2014, 23:55:16 UTC | openvswitch: Convert dp rcu read operation to locked operations dp read operations depends on ovs_dp_cmd_fill_info(). This API needs to looup vport to find dp name, but vport lookup can fail. Therefore to keep vport reference alive we need to take ovs lock. Introduced by commit 6093ae9abac1 ("openvswitch: Minimize dp and vport critical sections"). Signed-off-by: Pravin B Shelar <pshelar@nicira.com> Acked-by: Andy Zhou <azhou@nicira.com> | 14 November 2014, 23:13:26 UTC |
19e7a3d | Daniele Di Proietto | 11 November 2014, 22:51:22 UTC | openvswitch: Fix NDP flow mask validation match_validate() enforce that a mask matching on NDP attributes has also an exact match on ICMPv6 type. The ICMPv6 type, which is 8-bit wide, is stored in the 'tp.src' field of 'struct sw_flow_key', which is 16-bit wide. Therefore, an exact match on ICMPv6 type should only check the first 8 bits. This commit fixes a bug that prevented flows with an exact match on NDP field from being installed Introduced by commit 03f0d916aa03 ("openvswitch: Mega flow implementation"). Signed-off-by: Daniele Di Proietto <ddiproietto@vmware.com> Signed-off-by: Pravin B Shelar <pshelar@nicira.com> | 14 November 2014, 23:13:26 UTC |
856447d | Jesse Gross | 11 November 2014, 22:32:20 UTC | openvswitch: Fix checksum calculation when modifying ICMPv6 packets. The checksum of ICMPv6 packets uses the IP pseudoheader as part of the calculation, unlike ICMP in IPv4. This was not implemented, which means that modifying the IP addresses of an ICMPv6 packet would cause the checksum to no longer be correct as the psuedoheader did not match. Introduced by commit 3fdbd1ce11e5 ("openvswitch: add ipv6 'set' action"). Reported-by: Neal Shrader <icosahedral@gmail.com> Signed-off-by: Jesse Gross <jesse@nicira.com> Signed-off-by: Pravin B Shelar <pshelar@nicira.com> | 14 November 2014, 23:13:26 UTC |
ab64f16 | Pravin B Shelar | 11 November 2014, 21:40:49 UTC | openvswitch: Fix memory leak. Need to free memory in case of sample action error. Introduced by commit 651887b0c22cffcfce7eb9c ("openvswitch: Sample action without side effects"). Signed-off-by: Pravin B Shelar <pshelar@nicira.com> | 14 November 2014, 23:13:26 UTC |
b7f4c0b | David S. Miller | 14 November 2014, 22:12:55 UTC | Merge branch 'vxlan_gso_check' Joe Stringer says: ==================== Implement ndo_gso_check() for vxlan nics Most NICs that report NETIF_F_GSO_UDP_TUNNEL support VXLAN, and not other UDP-based encapsulation protocols where the format and size of the header may differ. This patch series implements a generic ndo_gso_check() for detecting VXLAN, then reuses it for these NICs. Implementation shamelessly stolen from Tom Herbert (with minor fixups): http://thread.gmane.org/gmane.linux.network/332428/focus=333111 v2: Drop i40e/fm10k patches (code diverged; handling separately). Refactor common code into vxlan_gso_check() helper. Minor style fixes. ==================== Signed-off-by: David S. Miller <davem@davemloft.net> | 14 November 2014, 22:12:55 UTC |
795a05c | Joe Stringer | 14 November 2014, 00:38:15 UTC | qlcnic: Implement ndo_gso_check() Use vxlan_gso_check() to advertise offload support for this NIC. Signed-off-by: Joe Stringer <joestringer@nicira.com> Acked-by: Shahed Shaikh <shahed.shaikh@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 14 November 2014, 22:12:48 UTC |
956bdab | Joe Stringer | 14 November 2014, 00:38:14 UTC | net/mlx4_en: Implement ndo_gso_check() Use vxlan_gso_check() to advertise offload support for this NIC. Signed-off-by: Joe Stringer <joestringer@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 14 November 2014, 22:12:48 UTC |
725d548 | Joe Stringer | 14 November 2014, 00:38:13 UTC | be2net: Implement ndo_gso_check() Use vxlan_gso_check() to advertise offload support for this NIC. Signed-off-by: Joe Stringer <joestringer@nicira.com> Acked-by: Sathya Perla <sperla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 14 November 2014, 22:12:48 UTC |
23e62de | Joe Stringer | 14 November 2014, 00:38:12 UTC | net: Add vxlan_gso_check() helper Most NICs that report NETIF_F_GSO_UDP_TUNNEL support VXLAN, and not other UDP-based encapsulation protocols where the format and size of the header differs. This patch implements a generic ndo_gso_check() for VXLAN which will only advertise GSO support when the skb looks like it contains VXLAN (or no UDP tunnelling at all). Implementation shamelessly stolen from Tom Herbert: http://thread.gmane.org/gmane.linux.network/332428/focus=333111 Signed-off-by: Joe Stringer <joestringer@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 14 November 2014, 22:12:48 UTC |
8a5809e | David S. Miller | 14 November 2014, 22:10:35 UTC | Merge tag 'master-2014-11-11' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless John W. Linville says: ==================== pull request: wireless 2014-11-13 Please pull this set of a few more wireless fixes intended for the 3.18 stream... For the mac80211 bits, Johannes says: "This has just one fix, for an issue with the CCMP decryption that can cause a kernel crash. I'm not sure it's remotely exploitable, but it's an important fix nonetheless." For the iwlwifi bits, Emmanuel says: "Two fixes here - we weren't updating mac80211 if a scan was cut short by RFKILL which confused cfg80211. As a result, the latter wouldn't allow to run another scan. Liad fixes a small bug in the firmware dump." On top of that... Arend van Spriel corrects a channel width conversion that caused a WARNING in brcmfmac. Hauke Mehrtens avoids a NULL pointer dereference in b43. Larry Finger hits a trio of rtlwifi bugs left over from recent backporting from the Realtek vendor driver. Miaoqing Pan fixes a clocking problem in ath9k that could affect packet timestamps and such. Stanislaw Gruszka addresses an payload alignment issue that has been plaguing rt2x00. Please let me know if there are problems! ==================== Signed-off-by: David S. Miller <davem@davemloft.net> | 14 November 2014, 22:10:35 UTC |
84bc886 | Vincent BENAYOUN | 13 November 2014, 12:47:26 UTC | inetdevice: fixed signed integer overflow There could be a signed overflow in the following code. The expression, (32-logmask) is comprised between 0 and 31 included. It may be equal to 31. In such a case the left shift will produce a signed integer overflow. According to the C99 Standard, this is an undefined behavior. A simple fix is to replace the signed int 1 with the unsigned int 1U. Signed-off-by: Vincent BENAYOUN <vincent.benayoun@trust-in-soft.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 14 November 2014, 22:08:58 UTC |
5195c14 | bill bonaparte | 06 November 2014, 13:36:48 UTC | netfilter: conntrack: fix race in __nf_conntrack_confirm against get_next_corpse After removal of the central spinlock nf_conntrack_lock, in commit 93bb0ceb75be2 ("netfilter: conntrack: remove central spinlock nf_conntrack_lock"), it is possible to race against get_next_corpse(). The race is against the get_next_corpse() cleanup on the "unconfirmed" list (a per-cpu list with seperate locking), which set the DYING bit. Fix this race, in __nf_conntrack_confirm(), by removing the CT from unconfirmed list before checking the DYING bit. In case race occured, re-add the CT to the dying list. While at this, fix coding style of the comment that has been updated. Fixes: 93bb0ceb75be2 ("netfilter: conntrack: remove central spinlock nf_conntrack_lock") Reported-by: bill bonaparte <programme110@gmail.com> Signed-off-by: bill bonaparte <programme110@gmail.com> Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> | 14 November 2014, 16:43:05 UTC |
b23dc5a | Linus Torvalds | 14 November 2014, 02:07:52 UTC | Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost Pull virtio bugfix from Michael S Tsirkin: "This fixes a crash in virtio console multi-channel mode that got introduced in -rc1" * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: virtio_console: move early VQ enablement | 14 November 2014, 02:07:52 UTC |
5cf5203 | Linus Torvalds | 14 November 2014, 01:54:08 UTC | Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net Pull networking fixes from David Miller: 1) sunhme driver lacks DMA mapping error checks, based upon a report by Meelis Roos. 2) Fix memory leak in mvpp2 driver, from Sudip Mukherjee. 3) DMA memory allocation sizes are wrong in systemport ethernet driver, fix from Florian Fainelli. 4) Fix use after free in mac80211 defragmentation code, from Johannes Berg. 5) Some networking uapi headers missing from Kbuild file, from Stephen Hemminger. 6) TUN driver gets csum_start offset wrong when VLAN accel is enabled, and macvtap has a similar bug, from Herbert Xu. 7) Adjust several tunneling drivers to set dev->iflink after registry, because registry sets that to -1 overwriting whatever we did. From Steffen Klassert. 8) Geneve forgets to set inner tunneling type, causing GSO segmentation to fail on some NICs. From Jesse Gross. 9) Fix several locking bugs in stmmac driver, from Fabrice Gasnier and Giuseppe CAVALLARO. 10) Fix spurious timeouts with NewReno on low traffic connections, from Marcelo Leitner. 11) Fix descriptor updates in enic driver, from Govindarajulu Varadarajan. 12) PPP calls bpf_prog_create() with locks held, which isn't kosher. Fix from Takashi Iwai. 13) Fix NULL deref in SCTP with malformed INIT packets, from Daniel Borkmann. 14) psock_fanout selftest accesses past the end of the mmap ring, fix from Shuah Khan. 15) Fix PTP timestamping for VLAN packets, from Richard Cochran. 16) netlink_unbind() calls in netlink pass wrong initial argument, from Hiroaki SHIMODA. 17) vxlan socket reuse accidently reuses a socket when the address family is different, so we have to explicitly check this, from Marcelo Lietner. 18) Fix missing include in nft_reject_bridge.c breaking the build on ppc and other architectures, from Guenter Roeck. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (75 commits) vxlan: Do not reuse sockets for a different address family smsc911x: power-up phydev before doing a software reset. lib: rhashtable - Remove weird non-ASCII characters from comments net/smsc911x: Fix delays in the PHY enable/disable routines net/smsc911x: Fix rare soft reset timeout issue due to PHY power-down mode netlink: Properly unbind in error conditions. net: ptp: fix time stamp matching logic for VLAN packets. cxgb4 : dcb open-lldp interop fixes selftests/net: psock_fanout seg faults in sock_fanout_read_ring() net: bcmgenet: apply MII configuration in bcmgenet_open() net: bcmgenet: connect and disconnect from the PHY state machine net: qualcomm: Fix dependency ixgbe: phy: fix uninitialized status in ixgbe_setup_phy_link_tnx net: phy: Correctly handle MII ioctl which changes autonegotiation. ipv6: fix IPV6_PKTINFO with v4 mapped net: sctp: fix memory leak in auth key management net: sctp: fix NULL pointer dereference in af->from_addr_param on malformed packet net: ppp: Don't call bpf_prog_create() in ppp_lock net/mlx4_en: Advertize encapsulation offloads features only when VXLAN tunnel is set cxgb4 : Fix bug in DCB app deletion ... | 14 November 2014, 01:54:08 UTC |
971ad4e | Linus Torvalds | 14 November 2014, 00:57:25 UTC | Merge branch 'akpm' (fixes from Andrew Morton) Merge misc fixes from Andrew Morton: "15 fixes" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: MAINTAINERS: add IIO include files kernel/panic.c: update comments for print_tainted mem-hotplug: reset node present pages when hot-adding a new pgdat mem-hotplug: reset node managed pages when hot-adding a new pgdat mm/debug-pagealloc: correct freepage accounting and order resetting fanotify: fix notification of groups with inode & mount marks mm, compaction: prevent infinite loop in compact_zone mm: alloc_contig_range: demote pages busy message from warn to info mm/slab: fix unalignment problem on Malta with EVA due to slab merge mm/page_alloc: restrict max order of merging on isolated pageblock mm/page_alloc: move freepage counting logic to __free_one_page() mm/page_alloc: add freepage on isolate pageblock to correct buddy list mm/page_alloc: fix incorrect isolation behavior by rechecking migratetype mm/compaction: skip the range until proper target pageblock is met zram: avoid kunmap_atomic() of a NULL pointer | 14 November 2014, 00:57:25 UTC |
b0ab3f1 | Linus Torvalds | 14 November 2014, 00:36:42 UTC | Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client Pull Ceph fixes from Sage Weil: "There is an overflow bug fix for cephfs from Zheng, a fix for handling large authentication ticket buffers in libceph from Ilya, and a few fixes for the request handling code from Ilya that affect RBD volumes" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client: libceph: change from BUG to WARN for __remove_osd() asserts libceph: clear r_req_lru_item in __unregister_linger_request() libceph: unlink from o_linger_requests when clearing r_osd libceph: do not crash on large auth tickets ceph: fix flush tid comparision | 14 November 2014, 00:36:42 UTC |
6b07974 | Linus Torvalds | 14 November 2014, 00:19:14 UTC | Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid Pull HID fixes from Jiri Kosina: - fix for an oops in HID core upon repeated subdriver insertion/removal under certain circumstances, by Benjamin Tissoires - quirk for another Elan Touchscreen device, by Adel Gadllah * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: HID: core: cleanup .claimed field on disconnect HID: usbhid: enable always-poll quirk for Elan Touchscreen 0103 | 14 November 2014, 00:19:14 UTC |
8fe671f | Daniel Baluta | 13 November 2014, 23:19:47 UTC | MAINTAINERS: add IIO include files Files under include/linux/iio were not reported as part of the IIO subsystem. Signed-off-by: Daniel Baluta <daniel.baluta@intel.com> Reported-by: Cristina Ciocan <cristina.ciocan@intel.com> Reviewed-by: Jingoo Han <jg1.han@samsung.com> Cc: Hartmut Knaack <knaack.h@gmx.de> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Peter Meerwald <pmeerw@pmeerw.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 14 November 2014, 00:17:06 UTC |
bc53a3f | Xie XiuQi | 13 November 2014, 23:19:44 UTC | kernel/panic.c: update comments for print_tainted Commit 69361eef9056 ("panic: add TAINT_SOFTLOCKUP") added the 'L' flag, but failed to update the comments for print_tainted(). So, update the comments. Signed-off-by: Xie XiuQi <xiexiuqi@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 14 November 2014, 00:17:06 UTC |
0bd8542 | Tang Chen | 13 November 2014, 23:19:41 UTC | mem-hotplug: reset node present pages when hot-adding a new pgdat When memory is hot-added, all the memory is in offline state. So clear all zones' present_pages because they will be updated in online_pages() and offline_pages(). Otherwise, /proc/zoneinfo will corrupt: When the memory of node2 is offline: # cat /proc/zoneinfo ...... Node 2, zone Movable ...... spanned 8388608 present 8388608 managed 0 When we online memory on node2: # cat /proc/zoneinfo ...... Node 2, zone Movable ...... spanned 8388608 present 16777216 managed 8388608 Signed-off-by: Tang Chen <tangchen@cn.fujitsu.com> Reviewed-by: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Cc: <stable@vger.kernel.org> [3.16+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 14 November 2014, 00:17:06 UTC |
f784a3f | Tang Chen | 13 November 2014, 23:19:39 UTC | mem-hotplug: reset node managed pages when hot-adding a new pgdat In free_area_init_core(), zone->managed_pages is set to an approximate value for lowmem, and will be adjusted when the bootmem allocator frees pages into the buddy system. But free_area_init_core() is also called by hotadd_new_pgdat() when hot-adding memory. As a result, zone->managed_pages of the newly added node's pgdat is set to an approximate value in the very beginning. Even if the memory on that node has node been onlined, /sys/device/system/node/nodeXXX/meminfo has wrong value: hot-add node2 (memory not onlined) cat /sys/device/system/node/node2/meminfo Node 2 MemTotal: 33554432 kB Node 2 MemFree: 0 kB Node 2 MemUsed: 33554432 kB Node 2 Active: 0 kB This patch fixes this problem by reset node managed pages to 0 after hot-adding a new node. 1. Move reset_managed_pages_done from reset_node_managed_pages() to reset_all_zones_managed_pages() 2. Make reset_node_managed_pages() non-static 3. Call reset_node_managed_pages() in hotadd_new_pgdat() after pgdat is initialized Signed-off-by: Tang Chen <tangchen@cn.fujitsu.com> Signed-off-by: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Cc: <stable@vger.kernel.org> [3.16+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 14 November 2014, 00:17:06 UTC |
57cbc87 | Joonsoo Kim | 13 November 2014, 23:19:36 UTC | mm/debug-pagealloc: correct freepage accounting and order resetting One thing I did in this patch is fixing freepage accounting. If we clear guard page and link it onto isolate buddy list, we should not increase freepage count. This patch adds conditional branch to skip counting in this case. Without this patch, this overcounting happens frequently if guard order is set and CMA is used. Another thing fixed in this patch is the target to reset order. In __free_one_page(), we check the buddy page whether it is a guard page or not. And, if so, we should clear guard attribute on the buddy page and reset order of it to 0. But, current code resets original page's order rather than buddy one's. Maybe, this doesn't have any problem, because whole merged page's order will be re-assigned soon. But, it is better to correct code. Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Gioh Kim <gioh.kim@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 14 November 2014, 00:17:06 UTC |
8edc6e1 | Jan Kara | 13 November 2014, 23:19:33 UTC | fanotify: fix notification of groups with inode & mount marks fsnotify() needs to merge inode and mount marks lists when notifying groups about events so that ignore masks from inode marks are reflected in mount mark notifications and groups are notified in proper order (according to priorities). Currently the sorting of the lists done by fsnotify_add_inode_mark() / fsnotify_add_vfsmount_mark() and fsnotify() differed which resulted ignore masks not being used in some cases. Fix the problem by always using the same comparison function when sorting / merging the mark lists. Thanks to Heinrich Schuchardt for improvements of my patch. Link: https://bugzilla.kernel.org/show_bug.cgi?id=87721 Signed-off-by: Jan Kara <jack@suse.cz> Reported-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Tested-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 14 November 2014, 00:17:06 UTC |
1d5bfe1 | Vlastimil Babka | 13 November 2014, 23:19:30 UTC | mm, compaction: prevent infinite loop in compact_zone Several people have reported occasionally seeing processes stuck in compact_zone(), even triggering soft lockups, in 3.18-rc2+. Testing a revert of commit e14c720efdd7 ("mm, compaction: remember position within pageblock in free pages scanner") fixed the issue, although the stuck processes do not appear to involve the free scanner. Finally, by code inspection, the bug was found in isolate_migratepages() which uses a slightly different condition to detect if the migration and free scanners have met, than compact_finished(). That has not been a problem until commit e14c720efdd7 allowed the free scanner position between individual invocations to be in the middle of a pageblock. In a relatively rare case, the migration scanner position can end up at the beginning of a pageblock, with the free scanner position in the middle of the same pageblock. If it's the migration scanner's turn, isolate_migratepages() exits immediately (without updating the position), while compact_finished() decides to continue compaction, resulting in a potentially infinite loop. The system can recover only if another process creates enough high-order pages to make the watermark checks in compact_finished() pass. This patch fixes the immediate problem by bumping the migration scanner's position to meet the free scanner in isolate_migratepages(), when both are within the same pageblock. This causes compact_finished() to terminate properly. A more robust check in compact_finished() is planned as a cleanup for better future maintainability. Fixes: e14c720efdd73 ("mm, compaction: remember position within pageblock in free pages scanner) Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Reported-by: P. Christeas <xrg@linux.gr> Tested-by: P. Christeas <xrg@linux.gr> Link: http://marc.info/?l=linux-mm&m=141508604232522&w=2 Reported-by: Norbert Preining <preining@logic.at> Tested-by: Norbert Preining <preining@logic.at> Link: https://lkml.org/lkml/2014/11/4/904 Reported-by: Pavel Machek <pavel@ucw.cz> Link: https://lkml.org/lkml/2014/11/7/164 Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: David Rientjes <rientjes@google.com> Cc: Mel Gorman <mel@csn.ul.ie> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 14 November 2014, 00:17:06 UTC |
dae803e | Michal Nazarewicz | 13 November 2014, 23:19:27 UTC | mm: alloc_contig_range: demote pages busy message from warn to info Having test_pages_isolated failure message as a warning confuses users into thinking that it is more serious than it really is. In reality, if called via CMA, allocation will be retried so a single test_pages_isolated failure does not prevent allocation from succeeding. Demote the warning message to an info message and reformat it such that the text "failed" does not appear and instead a less worrying "PFNS busy" is used. This message is trivially reproducible on a 10GB x86 machine on 3.16.y kernels configured with CONFIG_DMA_CMA. Signed-off-by: Michal Nazarewicz <mina86@mina86.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Peter Hurley <peter@hurleysoftware.com> Cc: Minchan Kim <minchan@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 14 November 2014, 00:17:05 UTC |
95069ac | Joonsoo Kim | 13 November 2014, 23:19:25 UTC | mm/slab: fix unalignment problem on Malta with EVA due to slab merge Unlike SLUB, sometimes, object isn't started at the beginning of the slab in SLAB. This causes the unalignment problem after slab merging is supported by commit 12220dea07f1 ("mm/slab: support slab merge"). Following is the report from Markos that fail to boot on Malta with EVA. Calibrating delay loop... 19.86 BogoMIPS (lpj=99328) pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 4096 (order: 0, 16384 bytes) Mountpoint-cache hash table entries: 4096 (order: 0, 16384 bytes) Kernel bug detected[#1]: CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.17.0-05639-g12220dea07f1 #1631 task: 1f04f5d8 ti: 1f050000 task.ti: 1f050000 epc : 80141190 alloc_unbound_pwq+0x234/0x304 Not tainted ra : 80141184 alloc_unbound_pwq+0x228/0x304 Process swapper/0 (pid: 1, threadinfo=1f050000, task=1f04f5d8, tls=00000000) Call Trace: alloc_unbound_pwq+0x234/0x304 apply_workqueue_attrs+0x11c/0x294 __alloc_workqueue_key+0x23c/0x470 init_workqueues+0x320/0x400 do_one_initcall+0xe8/0x23c kernel_init_freeable+0x9c/0x224 kernel_init+0x10/0x100 ret_from_kernel_thread+0x14/0x1c [ end trace cb88537fdc8fa200 ] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b alloc_unbound_pwq() allocates slab object from pool_workqueue. This kmem_cache requires 256 bytes alignment, but, current merging code doesn't honor that, and merge it with kmalloc-256. kmalloc-256 requires only cacheline size alignment so that above failure occurs. However, in x86, kmalloc-256 is luckily aligned in 256 bytes, so the problem didn't happen on it. To fix this problem, this patch introduces alignment mismatch check in find_mergeable(). This will fix the problem. Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Reported-by: Markos Chandras <Markos.Chandras@imgtec.com> Tested-by: Markos Chandras <Markos.Chandras@imgtec.com> Acked-by: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 14 November 2014, 00:17:05 UTC |
3c60509 | Joonsoo Kim | 13 November 2014, 23:19:21 UTC | mm/page_alloc: restrict max order of merging on isolated pageblock Current pageblock isolation logic could isolate each pageblock individually. This causes freepage accounting problem if freepage with pageblock order on isolate pageblock is merged with other freepage on normal pageblock. We can prevent merging by restricting max order of merging to pageblock order if freepage is on isolate pageblock. A side-effect of this change is that there could be non-merged buddy freepage even if finishing pageblock isolation, because undoing pageblock isolation is just to move freepage from isolate buddy list to normal buddy list rather than to consider merging. So, the patch also makes undoing pageblock isolation consider freepage merge. When un-isolation, freepage with more than pageblock order and it's buddy are checked. If they are on normal pageblock, instead of just moving, we isolate the freepage and free it in order to get merged. Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Cc: Mel Gorman <mgorman@suse.de> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Cc: Zhang Yanfei <zhangyanfei@cn.fujitsu.com> Cc: Tang Chen <tangchen@cn.fujitsu.com> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Cc: Wen Congyang <wency@cn.fujitsu.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Michal Nazarewicz <mina86@mina86.com> Cc: Laura Abbott <lauraa@codeaurora.org> Cc: Heesub Shin <heesub.shin@samsung.com> Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com> Cc: Ritesh Harjani <ritesh.list@gmail.com> Cc: Gioh Kim <gioh.kim@lge.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 14 November 2014, 00:17:05 UTC |
8f82b55 | Joonsoo Kim | 13 November 2014, 23:19:18 UTC | mm/page_alloc: move freepage counting logic to __free_one_page() All the caller of __free_one_page() has similar freepage counting logic, so we can move it to __free_one_page(). This reduce line of code and help future maintenance. This is also preparation step for "mm/page_alloc: restrict max order of merging on isolated pageblock" which fix the freepage counting problem on freepage with more than pageblock order. Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Cc: Mel Gorman <mgorman@suse.de> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Cc: Zhang Yanfei <zhangyanfei@cn.fujitsu.com> Cc: Tang Chen <tangchen@cn.fujitsu.com> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Cc: Wen Congyang <wency@cn.fujitsu.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Michal Nazarewicz <mina86@mina86.com> Cc: Laura Abbott <lauraa@codeaurora.org> Cc: Heesub Shin <heesub.shin@samsung.com> Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com> Cc: Ritesh Harjani <ritesh.list@gmail.com> Cc: Gioh Kim <gioh.kim@lge.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 14 November 2014, 00:17:05 UTC |
51bb1a4 | Joonsoo Kim | 13 November 2014, 23:19:14 UTC | mm/page_alloc: add freepage on isolate pageblock to correct buddy list In free_pcppages_bulk(), we use cached migratetype of freepage to determine type of buddy list where freepage will be added. This information is stored when freepage is added to pcp list, so if isolation of pageblock of this freepage begins after storing, this cached information could be stale. In other words, it has original migratetype rather than MIGRATE_ISOLATE. There are two problems caused by this stale information. One is that we can't keep these freepages from being allocated. Although this pageblock is isolated, freepage will be added to normal buddy list so that it could be allocated without any restriction. And the other problem is incorrect freepage accounting. Freepages on isolate pageblock should not be counted for number of freepage. Following is the code snippet in free_pcppages_bulk(). /* MIGRATE_MOVABLE list may include MIGRATE_RESERVEs */ __free_one_page(page, page_to_pfn(page), zone, 0, mt); trace_mm_page_pcpu_drain(page, 0, mt); if (likely(!is_migrate_isolate_page(page))) { __mod_zone_page_state(zone, NR_FREE_PAGES, 1); if (is_migrate_cma(mt)) __mod_zone_page_state(zone, NR_FREE_CMA_PAGES, 1); } As you can see above snippet, current code already handle second problem, incorrect freepage accounting, by re-fetching pageblock migratetype through is_migrate_isolate_page(page). But, because this re-fetched information isn't used for __free_one_page(), first problem would not be solved. This patch try to solve this situation to re-fetch pageblock migratetype before __free_one_page() and to use it for __free_one_page(). In addition to move up position of this re-fetch, this patch use optimization technique, re-fetching migratetype only if there is isolate pageblock. Pageblock isolation is rare event, so we can avoid re-fetching in common case with this optimization. This patch also correct migratetype of the tracepoint output. Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Acked-by: Minchan Kim <minchan@kernel.org> Acked-by: Michal Nazarewicz <mina86@mina86.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Cc: Mel Gorman <mgorman@suse.de> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Cc: Zhang Yanfei <zhangyanfei@cn.fujitsu.com> Cc: Tang Chen <tangchen@cn.fujitsu.com> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Cc: Wen Congyang <wency@cn.fujitsu.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Laura Abbott <lauraa@codeaurora.org> Cc: Heesub Shin <heesub.shin@samsung.com> Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com> Cc: Ritesh Harjani <ritesh.list@gmail.com> Cc: Gioh Kim <gioh.kim@lge.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 14 November 2014, 00:17:05 UTC |
ad53f92 | Joonsoo Kim | 13 November 2014, 23:19:11 UTC | mm/page_alloc: fix incorrect isolation behavior by rechecking migratetype Before describing bugs itself, I first explain definition of freepage. 1. pages on buddy list are counted as freepage. 2. pages on isolate migratetype buddy list are *not* counted as freepage. 3. pages on cma buddy list are counted as CMA freepage, too. Now, I describe problems and related patch. Patch 1: There is race conditions on getting pageblock migratetype that it results in misplacement of freepages on buddy list, incorrect freepage count and un-availability of freepage. Patch 2: Freepages on pcp list could have stale cached information to determine migratetype of buddy list to go. This causes misplacement of freepages on buddy list and incorrect freepage count. Patch 4: Merging between freepages on different migratetype of pageblocks will cause freepages accouting problem. This patch fixes it. Without patchset [3], above problem doesn't happens on my CMA allocation test, because CMA reserved pages aren't used at all. So there is no chance for above race. With patchset [3], I did simple CMA allocation test and get below result: - Virtual machine, 4 cpus, 1024 MB memory, 256 MB CMA reservation - run kernel build (make -j16) on background - 30 times CMA allocation(8MB * 30 = 240MB) attempts in 5 sec interval - Result: more than 5000 freepage count are missed With patchset [3] and this patchset, I found that no freepage count are missed so that I conclude that problems are solved. On my simple memory offlining test, these problems also occur on that environment, too. This patch (of 4): There are two paths to reach core free function of buddy allocator, __free_one_page(), one is free_one_page()->__free_one_page() and the other is free_hot_cold_page()->free_pcppages_bulk()->__free_one_page(). Each paths has race condition causing serious problems. At first, this patch is focused on first type of freepath. And then, following patch will solve the problem in second type of freepath. In the first type of freepath, we got migratetype of freeing page without holding the zone lock, so it could be racy. There are two cases of this race. 1. pages are added to isolate buddy list after restoring orignal migratetype CPU1 CPU2 get migratetype => return MIGRATE_ISOLATE call free_one_page() with MIGRATE_ISOLATE grab the zone lock unisolate pageblock release the zone lock grab the zone lock call __free_one_page() with MIGRATE_ISOLATE freepage go into isolate buddy list, although pageblock is already unisolated This may cause two problems. One is that we can't use this page anymore until next isolation attempt of this pageblock, because freepage is on isolate buddy list. The other is that freepage accouting could be wrong due to merging between different buddy list. Freepages on isolate buddy list aren't counted as freepage, but ones on normal buddy list are counted as freepage. If merge happens, buddy freepage on normal buddy list is inevitably moved to isolate buddy list without any consideration of freepage accouting so it could be incorrect. 2. pages are added to normal buddy list while pageblock is isolated. It is similar with above case. This also may cause two problems. One is that we can't keep these freepages from being allocated. Although this pageblock is isolated, freepage would be added to normal buddy list so that it could be allocated without any restriction. And the other problem is same as case 1, that it, incorrect freepage accouting. This race condition would be prevented by checking migratetype again with holding the zone lock. Because it is somewhat heavy operation and it isn't needed in common case, we want to avoid rechecking as much as possible. So this patch introduce new variable, nr_isolate_pageblock in struct zone to check if there is isolated pageblock. With this, we can avoid to re-check migratetype in common case and do it only if there is isolated pageblock or migratetype is MIGRATE_ISOLATE. This solve above mentioned problems. Changes from v3: Add one more check in free_one_page() that checks whether migratetype is MIGRATE_ISOLATE or not. Without this, abovementioned case 1 could happens. Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Acked-by: Minchan Kim <minchan@kernel.org> Acked-by: Michal Nazarewicz <mina86@mina86.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Cc: Mel Gorman <mgorman@suse.de> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Cc: Zhang Yanfei <zhangyanfei@cn.fujitsu.com> Cc: Tang Chen <tangchen@cn.fujitsu.com> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Cc: Wen Congyang <wency@cn.fujitsu.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Laura Abbott <lauraa@codeaurora.org> Cc: Heesub Shin <heesub.shin@samsung.com> Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com> Cc: Ritesh Harjani <ritesh.list@gmail.com> Cc: Gioh Kim <gioh.kim@lge.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 14 November 2014, 00:17:05 UTC |
5842001 | Joonsoo Kim | 13 November 2014, 23:19:07 UTC | mm/compaction: skip the range until proper target pageblock is met Commit 7d49d8868336 ("mm, compaction: reduce zone checking frequency in the migration scanner") has a side-effect that changes the iteration range calculation. Before the change, block_end_pfn is calculated using start_pfn, but now it blindly adds pageblock_nr_pages to the previous value. This causes the problem that isolation_start_pfn is larger than block_end_pfn when we isolate the page with more than pageblock order. In this case, isolation would fail due to an invalid range parameter. To prevent this, this patch implements skipping the range until a proper target pageblock is met. Without this patch, CMA with more than pageblock order always fails but with this patch it will succeed. Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Minchan Kim <minchan@kernel.org> Cc: Michal Nazarewicz <mina86@mina86.com> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 14 November 2014, 00:17:05 UTC |
c406515 | Weijie Yang | 13 November 2014, 23:19:05 UTC | zram: avoid kunmap_atomic() of a NULL pointer zram could kunmap_atomic() a NULL pointer in a rare situation: a zram page becomes a full-zeroed page after a partial write io. The current code doesn't handle this case and performs kunmap_atomic() on a NULL pointer, which panics the kernel. This patch fixes this issue. Signed-off-by: Weijie Yang <weijie.yang@samsung.com> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Dan Streetman <ddstreet@ieee.org> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Weijie Yang <weijie.yang.kh@gmail.com> Acked-by: Jerome Marchand <jmarchan@redhat.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 14 November 2014, 00:17:05 UTC |
19ca9fc | Marcelo Leitner | 13 November 2014, 16:43:08 UTC | vxlan: Do not reuse sockets for a different address family Currently, we only match against local port number in order to reuse socket. But if this new vxlan wants an IPv6 socket and a IPv4 one bound to that port, vxlan will reuse an IPv4 socket as IPv6 and a panic will follow. The following steps reproduce it: # ip link add vxlan6 type vxlan id 42 group 229.10.10.10 \ srcport 5000 6000 dev eth0 # ip link add vxlan7 type vxlan id 43 group ff0e::110 \ srcport 5000 6000 dev eth0 # ip link set vxlan6 up # ip link set vxlan7 up <panic> [ 4.187481] BUG: unable to handle kernel NULL pointer dereference at 0000000000000058 ... [ 4.188076] Call Trace: [ 4.188085] [<ffffffff81667c4a>] ? ipv6_sock_mc_join+0x3a/0x630 [ 4.188098] [<ffffffffa05a6ad6>] vxlan_igmp_join+0x66/0xd0 [vxlan] [ 4.188113] [<ffffffff810a3430>] process_one_work+0x220/0x710 [ 4.188125] [<ffffffff810a33c4>] ? process_one_work+0x1b4/0x710 [ 4.188138] [<ffffffff810a3a3b>] worker_thread+0x11b/0x3a0 [ 4.188149] [<ffffffff810a3920>] ? process_one_work+0x710/0x710 So address family must also match in order to reuse a socket. Reported-by: Jean-Tsung Hsiao <jhsiao@redhat.com> Signed-off-by: Marcelo Ricardo Leitner <mleitner@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 13 November 2014, 20:19:59 UTC |
ccf899a | Enric Balletbo i Serra | 13 November 2014, 08:14:34 UTC | smsc911x: power-up phydev before doing a software reset. With commit be9dad1f9f26604fb ("net: phy: suspend phydev when going to HALTED"), the PHY device will be put in a low-power mode using BMCR_PDOWN if the the interface is set down. The smsc911x driver does a software_reset opening the device driver (ndo_open). In such case, the PHY must be powered-up before access to any register and before calling the software_reset function. Otherwise, as the PHY is powered down the software reset fails and the interface can not be enabled again. This patch fixes this scenario that is easy to reproduce setting down the network interface and setting up again. $ ifconfig eth0 down $ ifconfig eth0 up ifconfig: SIOCSIFFLAGS: Input/output error Signed-off-by: Enric Balletbo i Serra <eballetbo@iseebcn.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 13 November 2014, 20:09:28 UTC |
0c828f2 | Herbert Xu | 13 November 2014, 05:10:48 UTC | lib: rhashtable - Remove weird non-ASCII characters from comments My editor spewed garbage that looked like memory corruption on my screen. It turns out that a number of occurences of "fi" got turned into a ligature. This patch replaces these ligatures with the ASCII letters "fi". Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Cheers, Acked-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net> | 13 November 2014, 19:38:46 UTC |
6ff53fd | Alexander Kochetkov | 13 November 2014, 01:26:20 UTC | net/smsc911x: Fix delays in the PHY enable/disable routines Increased delay in the smsc911x_phy_disable_energy_detect (from 1ms to 2ms). Dropped delays in the smsc911x_phy_enable_energy_detect (100ms and 1ms). The patch affect SMSC LAN generation 4 chips with integrated PHY (LAN9221). I saw problems with soft reset due to wrong udelay timings. After I fixed udelay, I measured the time needed to bring integrated PHY from power-down to operational mode (the time beetween clearing EDPWRDOWN bit and soft reset complete event). I got 1ms (measured using ktime_get). The value is equal to the current value (1ms) used in the smsc911x_phy_disable_energy_detect. It is near the upper bound and in order to avoid rare soft reset faults it is doubled (2ms). I don't know official timing for bringing up integrated PHY as specs doesn't clarify this (or may be I didn't found). It looks safe to drop delays before and after setting EDPWRDOWN bit (enable PHY power-down mode). I didn't saw any regressions with the patch. The patch was reviewed by Steve Glendinning and Microchip Team. Signed-off-by: Alexander Kochetkov <al.kochet@gmail.com> Acked-by: Steve Glendinning <steve.glendinning@shawell.net> Signed-off-by: David S. Miller <davem@davemloft.net> | 13 November 2014, 19:37:53 UTC |
242bcd5 | Alexander Kochetkov | 13 November 2014, 01:26:19 UTC | net/smsc911x: Fix rare soft reset timeout issue due to PHY power-down mode The patch affect SMSC LAN generation 4 chips with integrated PHY (LAN9221). It is possible that PHY could enter power-down mode (ENERGYON clear), between ENERGYON bit check in smsc911x_phy_disable_energy_detect and SRST bit set in smsc911x_soft_reset. This could happen, for example, if someone disconnect ethernet cable between the checks. The PHY in a power-down mode would prevent the MAC portion of chip to be software reseted. Initially found by code review, confirmed later using test case. This is low probability issue, and in order to reproduce it you have to run the script: while true; do ifconfig eth0 down ifconfig eth0 up || break done While the script is running you have to plug/unplug ethernet cable many times (using gpio controlled ethernet switch, for example) until get: [ 4516.477783] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 4516.512207] smsc911x smsc911x.0: eth0: SMSC911x/921x identified at 0xce006000, IRQ: 336 [ 4516.524658] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 4516.559082] smsc911x smsc911x.0: eth0: SMSC911x/921x identified at 0xce006000, IRQ: 336 [ 4516.571990] ADDRCONF(NETDEV_UP): eth0: link is not ready ifconfig: SIOCSIFFLAGS: Input/output error The patch was reviewed by Steve Glendinning and Microchip Team. Signed-off-by: Alexander Kochetkov <al.kochet@gmail.com> Acked-by: Steve Glendinning <steve.glendinning@shawell.net> Signed-off-by: David S. Miller <davem@davemloft.net> | 13 November 2014, 19:37:53 UTC |
cc9f1f5 | Ilya Dryomov | 05 November 2014, 16:33:44 UTC | libceph: change from BUG to WARN for __remove_osd() asserts No reason to use BUG_ON for osd request list assertions. Signed-off-by: Ilya Dryomov <idryomov@redhat.com> Reviewed-by: Alex Elder <elder@linaro.org> | 13 November 2014, 19:26:34 UTC |
ba9d114 | Ilya Dryomov | 05 November 2014, 12:45:58 UTC | libceph: clear r_req_lru_item in __unregister_linger_request() kick_requests() can put linger requests on the notarget list. This means we need to clear the much-overloaded req->r_req_lru_item in __unregister_linger_request() as well, or we get an assertion failure in ceph_osdc_release_request() - !list_empty(&req->r_req_lru_item). AFAICT the assumption was that registered linger requests cannot be on any of req->r_req_lru_item lists, but that's clearly not the case. Signed-off-by: Ilya Dryomov <idryomov@redhat.com> Reviewed-by: Alex Elder <elder@linaro.org> | 13 November 2014, 19:21:14 UTC |
a390de0 | Ilya Dryomov | 04 November 2014, 15:32:14 UTC | libceph: unlink from o_linger_requests when clearing r_osd Requests have to be unlinked from both osd->o_requests (normal requests) and osd->o_linger_requests (linger requests) lists when clearing req->r_osd. Otherwise __unregister_linger_request() gets confused and we trip over a !list_empty(&osd->o_linger_requests) assert in __remove_osd(). MON=1 OSD=1: # cat remove-osd.sh #!/bin/bash rbd create --size 1 test DEV=$(rbd map test) ceph osd out 0 sleep 3 rbd map dne/dne # obtain a new osdmap as a side effect rbd unmap $DEV & # will block sleep 3 ceph osd in 0 Signed-off-by: Ilya Dryomov <idryomov@redhat.com> Reviewed-by: Alex Elder <elder@linaro.org> | 13 November 2014, 19:21:13 UTC |
aaef317 | Ilya Dryomov | 22 October 2014, 20:25:22 UTC | libceph: do not crash on large auth tickets Large (greater than 32k, the value of PAGE_ALLOC_COSTLY_ORDER) auth tickets will have their buffers vmalloc'ed, which leads to the following crash in crypto: [ 28.685082] BUG: unable to handle kernel paging request at ffffeb04000032c0 [ 28.686032] IP: [<ffffffff81392b42>] scatterwalk_pagedone+0x22/0x80 [ 28.686032] PGD 0 [ 28.688088] Oops: 0000 [#1] PREEMPT SMP [ 28.688088] Modules linked in: [ 28.688088] CPU: 0 PID: 878 Comm: kworker/0:2 Not tainted 3.17.0-vm+ #305 [ 28.688088] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2007 [ 28.688088] Workqueue: ceph-msgr con_work [ 28.688088] task: ffff88011a7f9030 ti: ffff8800d903c000 task.ti: ffff8800d903c000 [ 28.688088] RIP: 0010:[<ffffffff81392b42>] [<ffffffff81392b42>] scatterwalk_pagedone+0x22/0x80 [ 28.688088] RSP: 0018:ffff8800d903f688 EFLAGS: 00010286 [ 28.688088] RAX: ffffeb04000032c0 RBX: ffff8800d903f718 RCX: ffffeb04000032c0 [ 28.688088] RDX: 0000000000000000 RSI: 0000000000000001 RDI: ffff8800d903f750 [ 28.688088] RBP: ffff8800d903f688 R08: 00000000000007de R09: ffff8800d903f880 [ 28.688088] R10: 18df467c72d6257b R11: 0000000000000000 R12: 0000000000000010 [ 28.688088] R13: ffff8800d903f750 R14: ffff8800d903f8a0 R15: 0000000000000000 [ 28.688088] FS: 00007f50a41c7700(0000) GS:ffff88011fc00000(0000) knlGS:0000000000000000 [ 28.688088] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 28.688088] CR2: ffffeb04000032c0 CR3: 00000000da3f3000 CR4: 00000000000006b0 [ 28.688088] Stack: [ 28.688088] ffff8800d903f698 ffffffff81392ca8 ffff8800d903f6e8 ffffffff81395d32 [ 28.688088] ffff8800dac96000 ffff880000000000 ffff8800d903f980 ffff880119b7e020 [ 28.688088] ffff880119b7e010 0000000000000000 0000000000000010 0000000000000010 [ 28.688088] Call Trace: [ 28.688088] [<ffffffff81392ca8>] scatterwalk_done+0x38/0x40 [ 28.688088] [<ffffffff81392ca8>] scatterwalk_done+0x38/0x40 [ 28.688088] [<ffffffff81395d32>] blkcipher_walk_done+0x182/0x220 [ 28.688088] [<ffffffff813990bf>] crypto_cbc_encrypt+0x15f/0x180 [ 28.688088] [<ffffffff81399780>] ? crypto_aes_set_key+0x30/0x30 [ 28.688088] [<ffffffff8156c40c>] ceph_aes_encrypt2+0x29c/0x2e0 [ 28.688088] [<ffffffff8156d2a3>] ceph_encrypt2+0x93/0xb0 [ 28.688088] [<ffffffff8156d7da>] ceph_x_encrypt+0x4a/0x60 [ 28.688088] [<ffffffff8155b39d>] ? ceph_buffer_new+0x5d/0xf0 [ 28.688088] [<ffffffff8156e837>] ceph_x_build_authorizer.isra.6+0x297/0x360 [ 28.688088] [<ffffffff8112089b>] ? kmem_cache_alloc_trace+0x11b/0x1c0 [ 28.688088] [<ffffffff8156b496>] ? ceph_auth_create_authorizer+0x36/0x80 [ 28.688088] [<ffffffff8156ed83>] ceph_x_create_authorizer+0x63/0xd0 [ 28.688088] [<ffffffff8156b4b4>] ceph_auth_create_authorizer+0x54/0x80 [ 28.688088] [<ffffffff8155f7c0>] get_authorizer+0x80/0xd0 [ 28.688088] [<ffffffff81555a8b>] prepare_write_connect+0x18b/0x2b0 [ 28.688088] [<ffffffff81559289>] try_read+0x1e59/0x1f10 This is because we set up crypto scatterlists as if all buffers were kmalloc'ed. Fix it. Cc: stable@vger.kernel.org Signed-off-by: Ilya Dryomov <idryomov@redhat.com> Reviewed-by: Sage Weil <sage@redhat.com> | 13 November 2014, 19:21:12 UTC |
3231300 | Yan, Zheng | 23 October 2014, 00:13:26 UTC | ceph: fix flush tid comparision TID of cap flush ack is 64 bits, but ceph_inode_info::flushing_cap_tid is only 16 bits. 16 bits should be plenty to let the cap flush updates pipeline appropriately, but we need to cast in the proper direction when comparing these differently-sized versions. So downcast the 64-bits one to 16 bits. Reflects ceph.git commit a5184cf46a6e867287e24aeb731634828467cd98. Signed-off-by: Yan, Zheng <zyan@redhat.com> Reviewed-by: Ilya Dryomov <idryomov@redhat.com> | 13 November 2014, 19:19:05 UTC |
3b98ec4 | Linus Torvalds | 13 November 2014, 17:57:04 UTC | Merge tag 'sound-3.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "Things get calming down, now we have only a few fix patches: a trivial fix for memory leak in usb-audio, a patch for the new HD-audio PCI id, a device-specific mute-LED fix, and a slightly big patch to cover the missing COEF inits of various Realtek codecs" * tag 'sound-3.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: hda - Add mute LED control for Lenovo Ideapad Z560 ALSA: hda/realtek - Change EAPD to verb control ALSA: usb-audio: Fix memory leak in FTU quirk ALSA: hda_intel: Add DeviceIDs for Sunrise Point-LP | 13 November 2014, 17:57:04 UTC |
2c54396 | Linus Torvalds | 13 November 2014, 17:46:15 UTC | Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security Pull SELinux fixlet from James Morris: "WARN_ONCE() here will unnecessarily terrify users" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: selinux: convert WARN_ONCE() to printk() in selinux_nlmsg_perm() | 13 November 2014, 17:46:15 UTC |
9118837 | Linus Torvalds | 13 November 2014, 17:36:39 UTC | Merge branch 'stable-3.18' of git://git.infradead.org/users/pcmoore/audit Pull audit fixes from Paul Moore: "After he sent the initial audit pull request for 3.18, Eric asked me to take over the management of the audit tree, hence this pull request to fix a couple of problems with audit. As you can see below, the changes are minimal: adding some whitespace to a string so userspace parses it correctly, and fixing a problem with audit's usage of fsnotify that was causing audit watch rules to be lost. Neither of these patches were very controversial on the mailing lists and they fix real problems, getting them into 3.18 would be a good thing" * 'stable-3.18' of git://git.infradead.org/users/pcmoore/audit: audit: keep inode pinned audit: AUDIT_FEATURE_CHANGE message format missing delimiting space | 13 November 2014, 17:36:39 UTC |
5a7a662 | Linus Torvalds | 13 November 2014, 17:19:20 UTC | Merge tag 'dm-3.18-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm Pull device mapper fixes from Mike Snitzer: - stable fix for dm-thin that avoids normal IO racing with discard - stable fix for a dm-cache related bug in dm-btree walking code that results from using very large fast device (eg 4T) with a very small cache blocksize (eg 32K) -- this is a very uncommon configuration - a couple fixes for dm-raid (one for stable and the other addresses a crash in 3.18-rc1 code) - stable fix for dm-thinp that addresses a very rare dm-bufio bug having to do with memory reclaimation (via shrinker) when using dm-thinp ontop of loopback devices - fix a leak in dm-stripe target constructor's error path * tag 'dm-3.18-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: dm btree: fix a recursion depth bug in btree walking code dm thin: grab a virtual cell before looking up the mapping dm raid: fix inaccessible superblocks causing oops in configure_discard_support dm raid: ensure superblock's size matches device's logical block size dm bufio: change __GFP_IO to __GFP_FS in shrinker callbacks dm stripe: fix potential for leak in stripe_ctr error path | 13 November 2014, 17:19:20 UTC |
09c6268 | James Morris | 13 November 2014, 10:49:53 UTC | Merge branch 'stable-3.18' of git://git.infradead.org/users/pcmoore/selinux into for-linus | 13 November 2014, 10:49:53 UTC |
3542aed | Takashi Iwai | 12 November 2014, 07:11:56 UTC | ALSA: hda - Add mute LED control for Lenovo Ideapad Z560 Lenovo Ideapad Z560 has a mute LED that is controlled via EAPD pin 0x1b on CX20585 codec. (EAPD bit on corresponds to mute LED on.) The machine doesn't need other EAPD, so the fixup concentrates on controlling EAPD 0x1b following the vmaster state (but inversely). Bugzilla: https://bugzilla.novell.com/show_bug.cgi?id=665315 Reported-by: Szymon Kowalczyk <fazerxlo@o2.pl> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> | 13 November 2014, 08:12:03 UTC |
65eca3a | Cornelia Huck | 20 October 2014, 13:58:49 UTC | virtio_console: move early VQ enablement Commit f5866db6 (virtio_console: enable VQs early) tried to make sure that DRIVER_OK was set when virtio_console started using its virtqueues. Doing this in add_port(), however, means that we try to set DRIVER_OK again when when a port is dynamically added after the probe function is done. Let's move virtio_device_ready() to the probe function just before trying to use the virtqueues instead. This is fine as nothing can fail inbetween. Reported-by: Thomas Graf <tgraf@suug.ch> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> | 13 November 2014, 07:53:26 UTC |
04689e7 | Linus Torvalds | 12 November 2014, 23:29:28 UTC | Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm Pull kvm fixes from Paolo Bonzini: "Two fixes --- one of them not exactly a one liner, but things are calming down on the KVM front at last" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: x86: Fix uninitialized op->type for some immediate values KVM: s390: virtio_ccw: remove unused variable | 12 November 2014, 23:29:28 UTC |
74b60ef | Linus Torvalds | 12 November 2014, 23:21:52 UTC | Merge tag 'xtensa-20141109' of git://github.com/czankel/xtensa-linux Pull Xtensa fixes from Chris Zankel: - fix umount syscall - fix ISS and xtfpga Kconfig dependencies so that more randconfigs are buildable - add seccomp, getrandom, and memfd_create syscalls - add defconfigs for KC705 and SMP LX200 - implement pgprot_noncached * tag 'xtensa-20141109' of git://github.com/czankel/xtensa-linux: xtensa: xtfpga: add lx200 SMP DTS and defconfig xtensa: xtfpga: add generic KC705 board config xtensa: re-wire umount syscall to sys_oldumount xtensa: xtfpga: only select ethoc when ethernet is available xtensa: add seccomp, getrandom, and memfd_create syscalls xtensa: ISS: add BLOCK dependency to BLK_DEV_SIMDISK xtensa: implement pgprot_noncached xtensa/uapi: Add definition of TIOC[SG]RS485 | 12 November 2014, 23:21:52 UTC |