Revision e9f53353e166a67dfe4f8295100f8ac39d6cf10b authored by Daejun Park on 06 January 2021, 01:32:42 UTC, committed by Theodore Ts'o on 15 January 2021, 19:41:31 UTC
In the fast commit, it adds REQ_FUA and REQ_PREFLUSH on each fast commit block when barrier is enabled. However, in recovery phase, ext4 compares CRC value in the tail. So it is sufficient to add REQ_FUA and REQ_PREFLUSH on the block that has tail. Signed-off-by: Daejun Park <daejun7.park@samsung.com> Reviewed-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com> Link: https://lore.kernel.org/r/20210106013242epcms2p5b6b4ed8ca86f29456fdf56aa580e74b4@epcms2p5 Signed-off-by: Theodore Ts'o <tytso@mit.edu>
1 parent 6b4b8e6
File | Mode | Size |
---|---|---|
busses | ||
muxes | ||
dev-interface.rst | -rw-r--r-- | 8.8 KB |
dma-considerations.rst | -rw-r--r-- | 3.6 KB |
fault-codes.rst | -rw-r--r-- | 5.1 KB |
functionality.rst | -rw-r--r-- | 6.4 KB |
gpio-fault-injection.rst | -rw-r--r-- | 6.0 KB |
i2c-protocol.rst | -rw-r--r-- | 3.3 KB |
i2c-stub.rst | -rw-r--r-- | 2.3 KB |
i2c-topology.rst | -rw-r--r-- | 15.8 KB |
i2c_bus.svg | -rw-r--r-- | 54.7 KB |
index.rst | -rw-r--r-- | 917 bytes |
instantiating-devices.rst | -rw-r--r-- | 10.0 KB |
old-module-parameters.rst | -rw-r--r-- | 2.1 KB |
slave-eeprom-backend.rst | -rw-r--r-- | 1005 bytes |
slave-interface.rst | -rw-r--r-- | 7.7 KB |
slave-testunit-backend.rst | -rw-r--r-- | 2.8 KB |
smbus-protocol.rst | -rw-r--r-- | 9.6 KB |
summary.rst | -rw-r--r-- | 2.6 KB |
ten-bit-addresses.rst | -rw-r--r-- | 1.6 KB |
writing-clients.rst | -rw-r--r-- | 15.2 KB |
Computing file changes ...