Revision ea505bc99f77f3f9db02bb965bd59ac5db063f60 authored by Viresh Kumar on 19 April 2012, 06:18:15 UTC, committed by Grant Likely on 27 April 2012, 18:07:40 UTC
Currently, if we request for frequency greater than maximum possible, spi driver returns error. For example, if the spi block src frequency is 333/4 MHz, i.e. 83.33.. MHz, maximum frequency programmable would be src/2. Which would come around 41.6... It is difficult to pass frequency in these figures. We normally try to program in round figures, like 42 MHz and it should get programmed to <= requested_frequency, i.e. 41.6... For this to happen, we must not return error even if requested freq is higher than max possible. But should program it to max possible. Reported-by: Vinit Kamalaksha Shenoy <vinit.shenoy@st.com> Signed-off-by: Viresh Kumar <viresh.kumar@st.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
1 parent 88a3a25
| File | Mode | Size |
|---|---|---|
| Documentation | ||
| arch | ||
| block | ||
| crypto | ||
| drivers | ||
| firmware | ||
| fs | ||
| include | ||
| init | ||
| ipc | ||
| kernel | ||
| lib | ||
| mm | ||
| net | ||
| samples | ||
| scripts | ||
| security | ||
| sound | ||
| tools | ||
| usr | ||
| virt | ||
| .gitignore | -rw-r--r-- | 1014 bytes |
| .mailmap | -rw-r--r-- | 4.2 KB |
| COPYING | -rw-r--r-- | 18.3 KB |
| CREDITS | -rw-r--r-- | 92.8 KB |
| Kbuild | -rw-r--r-- | 2.5 KB |
| Kconfig | -rw-r--r-- | 252 bytes |
| MAINTAINERS | -rw-r--r-- | 205.5 KB |
| Makefile | -rw-r--r-- | 52.2 KB |
| README | -rw-r--r-- | 17.0 KB |
| REPORTING-BUGS | -rw-r--r-- | 3.3 KB |
Computing file changes ...
