https://github.com/torvalds/linux
- v5.9-rc8
- v5.9-rc7
- v5.9-rc6
- v5.9-rc5
- v5.9-rc4
- v5.9-rc3
- v5.9-rc2
- v5.9-rc1
- v5.9
- v5.8-rc7
- v5.8-rc6
- v5.8-rc5
- v5.8-rc4
- v5.8-rc3
- v5.8-rc2
- v5.8-rc1
- v5.8
- v5.7-rc7
- v5.7-rc6
- v5.7-rc5
- v5.7-rc4
- v5.7-rc3
- v5.7-rc2
- v5.7-rc1
- v5.7
- v5.6-rc7
- v5.6-rc6
- v5.6-rc5
- v5.6-rc4
- v5.6-rc3
- v5.6-rc2
- v5.6-rc1
- v5.6
- v5.5-rc7
- v5.5-rc6
- v5.5-rc5
- v5.5-rc4
- v5.5-rc3
- v5.5-rc2
- v5.5-rc1
- v5.5
- v5.4-rc8
- v5.4-rc7
- v5.4-rc6
- v5.4-rc5
- v5.4-rc4
- v5.4-rc3
- v5.4-rc2
- v5.4-rc1
- v5.4
- v5.3-rc8
- v5.3-rc7
- v5.3-rc6
- v5.3-rc5
- v5.3-rc4
- v5.3-rc3
- v5.3-rc2
- v5.3-rc1
- v5.3
- v5.2-rc7
- v5.2-rc6
- v5.2-rc5
- v5.2-rc4
- v5.2-rc3
- v5.2-rc2
- v5.2-rc1
- v5.2
- v5.15-rc6
- v5.15-rc5
- v5.15-rc4
- v5.15-rc3
- v5.15-rc2
- v5.15-rc1
- v5.14-rc7
- v5.14-rc6
- v5.14-rc5
- v5.14-rc4
- v5.14-rc3
- v5.14-rc2
- v5.14-rc1
- v5.14
- v5.13-rc7
- v5.13-rc6
- v5.13-rc5
- v5.13-rc4
- v5.13-rc3
- v5.13-rc2
- v5.13-rc1
- v5.13
- v5.12-rc8
- v5.12-rc7
- v5.12-rc6
- v5.12-rc5
- v5.12-rc4
- v5.12-rc3
- v5.12-rc2
- v5.12-rc1
- v5.12
- v5.11-rc7
- v5.11-rc6
- v5.11-rc5
- v5.11-rc4
- v5.11-rc3
- v5.11-rc2
- v5.11-rc1
- v5.11
- v5.10-rc7
- v5.10-rc6
- v5.10-rc5
- v5.10-rc4
- v5.10-rc3
- v5.10-rc2
- v5.10-rc1
- v5.10
- v5.1-rc7
- v5.1-rc6
- v5.1-rc5
- v5.1-rc4
- v5.1-rc3
- v5.1-rc2
- v5.1-rc1
- v5.1
- v5.0-rc8
- v5.0-rc7
- v5.0-rc6
- v5.0-rc5
- v5.0-rc4
- v5.0-rc3
- v5.0-rc2
- v5.0-rc1
- v5.0
- v4.9-rc8
- v4.9-rc7
- v4.9-rc6
- v4.9-rc5
- v4.9-rc4
- v4.9-rc3
- v4.9-rc2
- v4.9-rc1
- v4.9
- v4.8-rc8
- v4.8-rc7
- v4.8-rc6
- v4.8-rc5
- v4.8-rc4
- v4.8-rc3
- v4.8-rc2
- v4.8-rc1
- v4.8
- v4.7-rc7
- v4.7-rc6
- v4.7-rc5
- v4.7-rc4
- v4.7-rc3
- v4.7-rc2
- v4.7-rc1
- v4.7
- v4.6-rc7
- v4.6-rc6
- v4.6-rc5
- v4.6-rc4
- v4.6-rc3
- v4.6-rc2
- v4.6-rc1
- v4.6
- v4.5-rc7
- v4.5-rc6
- v4.5-rc5
- v4.5-rc4
- v4.5-rc3
- v4.5-rc2
- v4.5-rc1
- v4.5
- v4.4-rc8
- v4.4-rc7
- v4.4-rc6
- v4.4-rc5
- v4.4-rc4
- v4.4-rc3
- v4.4-rc2
- v4.4-rc1
- v4.4
- v4.3-rc7
- v4.3-rc6
- v4.3-rc5
- v4.3-rc4
- v4.3-rc3
- v4.3-rc2
- v4.3-rc1
- v4.3
- v4.20-rc7
- v4.20-rc6
- v4.20-rc5
- v4.20-rc4
- v4.20-rc3
- v4.20-rc2
- v4.20-rc1
- v4.20
- v4.2-rc8
- v4.2-rc7
- v4.2-rc6
- v4.2-rc5
- v4.2-rc4
- v4.2-rc3
- v4.2-rc2
- v4.2-rc1
- v4.2
- v4.19-rc8
- v4.19-rc7
- v4.19-rc6
- v4.19-rc5
- v4.19-rc4
- v4.19-rc3
- v4.19-rc2
- v4.19-rc1
- v4.19
- v4.18-rc8
- v4.18-rc7
- v4.18-rc6
- v4.18-rc5
- v4.18-rc4
- v4.18-rc3
- v4.18-rc2
- v4.18-rc1
- v4.18
- v4.17-rc7
- v4.17-rc6
- v4.17-rc5
- v4.17-rc4
- v4.17-rc3
- v4.17-rc2
- v4.17-rc1
- v4.17
- v4.16-rc7
- v4.16-rc6
- v4.16-rc5
- v4.16-rc4
- v4.16-rc3
- v4.16-rc2
- v4.16-rc1
- v4.16
- v4.15-rc9
- v4.15-rc8
- v4.15-rc7
- v4.15-rc6
- v4.15-rc5
- v4.15-rc4
- v4.15-rc3
- v4.15-rc2
- v4.15-rc1
- v4.15
- v4.14-rc8
- v4.14-rc7
- v4.14-rc6
- v4.14-rc5
- v4.14-rc4
- v4.14-rc3
- v4.14-rc2
- v4.14-rc1
- v4.14
- v4.13-rc7
- v4.13-rc6
- v4.13-rc5
- v4.13-rc4
- v4.13-rc3
- v4.13-rc2
- v4.13-rc1
- v4.13
- v4.12-rc7
- v4.12-rc6
- v4.12-rc5
- v4.12-rc4
- v4.12-rc3
- v4.12-rc2
- v4.12-rc1
- v4.12
- v4.11-rc8
- v4.11-rc7
- v4.11-rc6
- v4.11-rc5
- v4.11-rc4
- v4.11-rc3
- v4.11-rc2
- v4.11-rc1
- v4.11
- v4.10-rc8
- v4.10-rc7
- v4.10-rc6
- v4.10-rc5
- v4.10-rc4
- v4.10-rc3
- v4.10-rc2
- v4.10-rc1
- v4.10
- v4.1-rc8
- v4.1-rc7
- v4.1-rc6
- v4.1-rc5
- v4.1-rc4
- v4.1-rc3
- v4.1-rc2
- v4.1-rc1
- v4.1
- v4.0-rc7
- v4.0-rc6
- v4.0-rc5
- v4.0-rc4
- v4.0-rc3
- v4.0-rc2
- v4.0-rc1
- v4.0
- v3.9-rc8
- v3.9-rc7
- v3.9-rc6
- v3.9-rc5
- v3.9-rc4
- v3.9-rc3
- v3.9-rc2
- v3.9-rc1
- v3.9
- v3.8-rc7
- v3.8-rc6
- v3.8-rc5
- v3.8-rc4
- v3.8-rc3
- v3.8-rc2
- v3.8-rc1
- v3.8
- v3.7-rc8
- v3.7-rc7
- v3.7-rc6
- v3.7-rc5
- v3.7-rc4
- v3.7-rc3
- v3.7-rc2
- v3.7-rc1
- v3.7
- v3.6-rc7
- v3.6-rc6
- v3.6-rc5
- v3.6-rc4
- v3.6-rc3
- v3.6-rc2
- v3.6-rc1
- v3.6
- v3.5-rc7
- v3.5-rc6
- v3.5-rc5
- v3.5-rc4
- v3.5-rc3
- v3.5-rc2
- v3.5-rc1
- v3.5
- v3.4-rc7
- v3.4-rc6
- v3.4-rc5
- v3.4-rc4
- v3.4-rc3
- v3.4-rc2
- v3.4-rc1
- v3.4
- v3.3-rc7
- v3.3-rc6
- v3.3-rc5
- v3.3-rc4
- v3.3-rc3
- v3.3-rc2
- v3.3-rc1
- v3.3
- v3.2-rc7
- v3.2-rc6
- v3.2-rc5
- v3.2-rc4
- v3.2-rc3
- v3.2-rc2
- v3.2-rc1
- v3.2
- v3.19-rc7
- v3.19-rc6
- v3.19-rc5
- v3.19-rc4
- v3.19-rc3
- v3.19-rc2
- v3.19-rc1
- v3.19
- v3.18-rc7
- v3.18-rc6
- v3.18-rc5
- v3.18-rc4
- v3.18-rc3
- v3.18-rc2
- v3.18-rc1
- v3.18
- v3.17-rc7
- v3.17-rc6
- v3.17-rc5
- v3.17-rc4
- v3.17-rc3
- v3.17-rc2
- v3.17-rc1
- v3.17
- v3.16-rc7
- v3.16-rc6
- v3.16-rc5
- v3.16-rc4
- v3.16-rc3
- v3.16-rc2
- v3.16-rc1
- v3.16
- v3.15-rc8
- v3.15-rc7
- v3.15-rc6
- v3.15-rc5
- v3.15-rc4
- v3.15-rc3
- v3.15-rc2
- v3.15-rc1
- v3.15
- v3.14-rc8
- v3.14-rc7
- v3.14-rc6
- v3.14-rc5
- v3.14-rc4
- v3.14-rc3
- v3.14-rc2
- v3.14-rc1
- v3.14
- v3.13-rc8
- v3.13-rc7
- v3.13-rc6
- v3.13-rc5
- v3.13-rc4
- v3.13-rc3
- v3.13-rc2
- v3.13-rc1
- v3.13
- v3.12-rc7
- v3.12-rc6
- v3.12-rc5
- v3.12-rc4
- v3.12-rc3
- v3.12-rc2
- v3.12-rc1
- v3.12
- v3.11-rc7
- v3.11-rc6
- v3.11-rc5
- v3.11-rc4
- v3.11-rc3
- v3.11-rc2
- v3.11-rc1
- v3.11
- v3.10-rc7
- v3.10-rc6
- v3.10-rc5
- v3.10-rc4
- v3.10-rc3
- v3.10-rc2
- v3.10-rc1
- v3.10
- v3.1-rc9
- v3.1-rc8
- v3.1-rc7
- v3.1-rc6
- v3.1-rc5
- v3.1-rc4
- v3.1-rc3
- v3.1-rc2
- v3.1-rc10
- v3.1-rc1
- v3.1
- v3.0-rc7
- v3.0-rc6
- v3.0-rc5
- v3.0-rc4
- v3.0-rc3
- v3.0-rc2
- v3.0-rc1
- v3.0
- v2.6.39-rc7
- v2.6.39-rc6
- v2.6.39-rc5
- v2.6.39-rc4
- v2.6.39-rc3
- v2.6.39-rc2
- v2.6.39-rc1
- v2.6.39
- v2.6.38-rc8
- v2.6.38-rc7
- v2.6.38-rc6
- v2.6.38-rc5
- v2.6.38-rc4
- v2.6.38-rc3
- v2.6.38-rc2
- v2.6.38-rc1
- v2.6.38
- v2.6.37-rc8
- v2.6.37-rc7
- v2.6.37-rc6
- v2.6.37-rc5
- v2.6.37-rc4
- v2.6.37-rc3
- v2.6.37-rc2
- v2.6.37-rc1
- v2.6.37
- v2.6.36-rc8
- v2.6.36-rc7
- v2.6.36-rc6
- v2.6.36-rc5
- v2.6.36-rc4
- v2.6.36-rc3
- v2.6.36-rc2
- v2.6.36-rc1
- v2.6.36
- v2.6.35-rc6
- v2.6.35-rc5
- v2.6.35-rc4
- v2.6.35-rc3
- v2.6.35-rc2
- v2.6.35-rc1
- v2.6.35
- v2.6.34-rc7
- v2.6.34-rc6
- v2.6.34-rc5
- v2.6.34-rc4
- v2.6.34-rc3
- v2.6.34-rc2
- v2.6.34-rc1
- v2.6.34
- v2.6.33-rc8
- v2.6.33-rc7
- v2.6.33-rc6
- v2.6.33-rc5
- v2.6.33-rc4
- v2.6.33-rc3
- v2.6.33-rc2
- v2.6.33-rc1
- v2.6.33
- v2.6.32-rc8
- v2.6.32-rc7
- v2.6.32-rc6
- v2.6.32-rc5
- v2.6.32-rc4
- v2.6.32-rc3
- v2.6.32-rc1
- v2.6.32
- v2.6.31-rc9
- v2.6.31-rc8
- v2.6.31-rc7
- v2.6.31-rc6
- v2.6.31-rc5
- v2.6.31-rc4
- v2.6.31-rc3
- v2.6.31-rc2
- v2.6.31-rc1
- v2.6.31
- v2.6.30-rc8
- v2.6.30-rc7
- v2.6.30-rc6
- v2.6.30-rc5
- v2.6.30-rc4
- v2.6.30-rc3
- v2.6.30-rc2
- v2.6.30-rc1
- v2.6.30
- v2.6.29-rc8
- v2.6.29-rc7
- v2.6.29-rc6
- v2.6.29-rc5
- v2.6.29-rc4
- v2.6.29-rc3
- v2.6.29-rc2
- v2.6.29-rc1
- v2.6.29
- v2.6.28-rc9
- v2.6.28-rc8
- v2.6.28-rc7
- v2.6.28-rc6
- v2.6.28-rc5
- v2.6.28-rc4
- v2.6.28-rc3
- v2.6.28-rc2
- v2.6.28-rc1
- v2.6.28
- v2.6.27-rc9
- v2.6.27-rc8
- v2.6.27-rc7
- v2.6.27-rc6
- v2.6.27-rc5
- v2.6.27-rc4
- v2.6.27-rc3
- v2.6.27-rc2
- v2.6.27-rc1
- v2.6.27
- v2.6.26-rc9
- v2.6.26-rc8
- v2.6.26-rc7
- v2.6.26-rc6
- v2.6.26-rc5
- v2.6.26-rc4
- v2.6.26-rc3
- v2.6.26-rc2
- v2.6.26-rc1
- v2.6.26
- v2.6.25-rc9
- v2.6.25-rc8
- v2.6.25-rc7
- v2.6.25-rc6
- v2.6.25-rc5
- v2.6.25-rc4
- v2.6.25-rc3
- v2.6.25-rc2
- v2.6.25-rc1
- v2.6.25
- v2.6.24-rc8
- v2.6.24-rc7
- v2.6.24-rc6
- v2.6.24-rc5
- v2.6.24-rc4
- v2.6.24-rc3
- v2.6.24-rc2
- v2.6.24-rc1
- v2.6.24
- v2.6.23-rc9
- v2.6.23-rc8
- v2.6.23-rc7
- v2.6.23-rc6
- v2.6.23-rc5
- v2.6.23-rc4
- v2.6.23-rc3
- v2.6.23-rc2
- v2.6.23-rc1
- v2.6.23
- v2.6.22-rc7
- v2.6.22-rc6
- v2.6.22-rc5
- v2.6.22-rc4
- v2.6.22-rc3
- v2.6.22-rc2
- v2.6.22-rc1
- v2.6.22
- v2.6.21-rc7
- v2.6.21-rc6
- v2.6.21-rc5
- v2.6.21-rc4
- v2.6.21-rc3
- v2.6.21-rc2
- v2.6.21-rc1
- v2.6.21
- v2.6.20-rc7
- v2.6.20-rc6
- v2.6.20-rc5
- v2.6.20-rc4
- v2.6.20-rc3
- v2.6.20-rc2
- v2.6.20-rc1
- v2.6.20
- v2.6.19-rc6
- v2.6.19-rc5
- v2.6.19-rc4
- v2.6.19-rc3
- v2.6.19-rc2
- v2.6.19-rc1
- v2.6.19
- v2.6.18-rc7
- v2.6.18-rc6
- v2.6.18-rc5
- v2.6.18-rc4
- v2.6.18-rc3
- v2.6.18-rc2
- v2.6.18-rc1
- v2.6.18
- v2.6.17-rc6
- v2.6.17-rc5
- v2.6.17-rc4
- v2.6.17-rc3
- v2.6.17-rc2
- v2.6.17-rc1
- v2.6.17
- v2.6.16-rc6
- v2.6.16-rc5
- v2.6.16-rc4
- v2.6.16-rc3
- v2.6.16-rc2
- v2.6.16-rc1
- v2.6.16
- v2.6.15-rc7
- v2.6.15-rc6
- v2.6.15-rc5
- v2.6.15-rc4
- v2.6.15-rc3
- v2.6.15-rc2
- v2.6.15-rc1
- v2.6.15
- v2.6.14-rc5
- v2.6.14-rc4
- v2.6.14-rc3
- v2.6.14-rc2
- v2.6.14-rc1
- v2.6.14
- v2.6.13-rc7
- v2.6.13-rc6
- v2.6.13-rc5
- v2.6.13-rc4
- v2.6.13-rc3
- v2.6.13-rc2
- v2.6.13-rc1
- v2.6.13
- v2.6.12-rc6
- v2.6.12-rc5
- v2.6.12-rc4
- v2.6.12-rc3
- v2.6.12-rc2
- v2.6.12
- v2.6.11-tree
Take a new snapshot of a software origin
If the archived software origin currently browsed is not synchronized with its upstream version (for instance when new commits have been issued), you can explicitly request Software Heritage to take a new snapshot of it.
Use the form below to proceed. Once a request has been submitted and accepted, it will be processed as soon as possible. You can then check its processing state by visiting this dedicated page.![swh spinner](/static/img/swh-spinner.gif)
Processing "take a new snapshot" request ...
Revision | Author | Date | Message | Commit Date |
---|---|---|---|---|
ea67db4 | Linus Torvalds | 21 December 2007, 01:25:48 UTC | Linux 2.6.24-rc6 | 21 December 2007, 01:25:48 UTC |
4bde570 | Linus Torvalds | 21 December 2007, 01:02:37 UTC | Merge git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-x86 * git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-x86: x86: intel_cacheinfo.c: cpu cache info entry for Intel Tolapai x86: fix die() to not be preemptible | 21 December 2007, 01:02:37 UTC |
2b5baad | Linus Torvalds | 21 December 2007, 01:02:22 UTC | Merge branch 'for-linus' of git://oss.sgi.com:8090/xfs/xfs-2.6 * 'for-linus' of git://oss.sgi.com:8090/xfs/xfs-2.6: [XFS] Initialise current offset in xfs_file_readdir correctly [XFS] Fix mknod regression | 21 December 2007, 01:02:22 UTC |
4743e0e | Lachlan McIlroy | 21 December 2007, 00:00:23 UTC | [XFS] Initialise current offset in xfs_file_readdir correctly After reading the directory contents into the temporary buffer, we grab each dirent and pass it to filldir witht eh current offset of the dirent. The current offset was not being set for the first dirent in the temporary buffer, which coul dresult in bad offsets being set in the f_pos field result in looping and duplicate entries being returned from readdir. SGI-PV: 974905 SGI-Modid: xfs-linux-melb:xfs-kern:30282a Signed-off-by: David Chinner <dgc@sgi.com> Signed-off-by: Tim Shimmin <tes@sgi.com> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com> | 21 December 2007, 00:40:05 UTC |
bad60fd | Christoph Hellwig | 20 December 2007, 23:58:56 UTC | [XFS] Fix mknod regression This was broken by my '[XFS] simplify xfs_create/mknod/symlink prototype', which assigned the re-shuffled ondisk dev_t back to the rdev variable in xfs_vn_mknod. Because of that i_rdev is set to the ondisk dev_t instead of the linux dev_t later down the function. Fortunately the fix for it is trivial: we can just remove the assignment because xfs_revalidate_inode has done the proper job before unlocking the inode. SGI-PV: 974873 SGI-Modid: xfs-linux-melb:xfs-kern:30273a Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: David Chinner <dgc@sgi.com> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com> | 21 December 2007, 00:39:58 UTC |
04fa11e | Jason Gaston | 21 December 2007, 00:27:19 UTC | x86: intel_cacheinfo.c: cpu cache info entry for Intel Tolapai This patch adds a cpu cache info entry for the Intel Tolapai cpu. Signed-off-by: Jason Gaston <jason.d.gaston@intel.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> | 21 December 2007, 00:27:19 UTC |
c0a698b | Ingo Molnar | 21 December 2007, 00:27:19 UTC | x86: fix die() to not be preemptible Andrew "Eagle Eye" Morton noticed that we use raw_local_save_flags() instead of raw_local_irq_save(flags) in die(). This allows the preemption of oopsing contexts - which is highly undesirable. It also causes CONFIG_DEBUG_PREEMPT to complain, as reported by Miles Lane. this bug was introduced via: commit 39743c9ef717fd4f2b5583f010115c5f2482b8ae Author: Andi Kleen <ak@suse.de> Date: Fri Oct 19 20:35:03 2007 +0200 x86: use raw locks during oopses - spin_lock_irqsave(&die.lock, flags); + __raw_spin_lock(&die.lock); + raw_local_save_flags(flags); that is not a correct open-coding of spin_lock_irqsave(): both the ordering is wrong (irqs should be disabled _first_), and the wrong flags-saving API was used. Signed-off-by: Ingo Molnar <mingo@elte.hu> | 21 December 2007, 00:27:19 UTC |
faa4877 | Linus Torvalds | 20 December 2007, 19:53:41 UTC | Merge git://git.kernel.org/pub/scm/linux/kernel/git/mingo/linux-2.6-sched * git://git.kernel.org/pub/scm/linux/kernel/git/mingo/linux-2.6-sched: debug: add end-of-oops marker sched: rt: account the cpu time during the tick | 20 December 2007, 19:53:41 UTC |
17eb2c3 | Linus Torvalds | 20 December 2007, 19:25:22 UTC | Merge git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-2.6-dm * git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-2.6-dm: dm crypt: use bio_add_page dm: merge max_hw_sector dm: trigger change uevent on rename dm crypt: fix write endio dm mpath: hp requires scsi dm: table detect io beyond device | 20 December 2007, 19:25:22 UTC |
91e1062 | Milan Broz | 13 December 2007, 14:16:10 UTC | dm crypt: use bio_add_page Fix possible max_phys_segments violation in cloned dm-crypt bio. In write operation dm-crypt needs to allocate new bio request and run crypto operation on this clone. Cloned request has always the same size, but number of physical segments can be increased and violate max_phys_segments restriction. This can lead to data corruption and serious hardware malfunction. This was observed when using XFS over dm-crypt and at least two HBA controller drivers (arcmsr, cciss) recently. Fix it by using bio_add_page() call (which tests for other restrictions too) instead of constructing own biovec. All versions of dm-crypt are affected by this bug. Cc: stable@kernel.org Cc: dm-crypt@saout.de Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> | 20 December 2007, 17:32:13 UTC |
9121250 | Neil Brown | 13 December 2007, 14:16:04 UTC | dm: merge max_hw_sector Make sure dm honours max_hw_sectors of underlying devices We still have no firm testing evidence in support of this patch but believe it may help to resolve some bug reports. - agk Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Alasdair G Kergon <agk@redhat.com> | 20 December 2007, 17:32:12 UTC |
69267a3 | Alasdair G Kergon | 13 December 2007, 14:15:57 UTC | dm: trigger change uevent on rename Insert a missing KOBJ_CHANGE notification when a device is renamed. Cc: Scott James Remnant <scott@ubuntu.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> | 20 December 2007, 17:32:11 UTC |
adfe477 | Milan Broz | 13 December 2007, 14:15:51 UTC | dm crypt: fix write endio Fix BIO_UPTODATE test for write io. Cc: stable@kernel.org Cc: dm-crypt@saout.de Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> | 20 December 2007, 17:32:10 UTC |
d1622e8 | Paul Mundt | 13 December 2007, 14:15:43 UTC | dm mpath: hp requires scsi With CONFIG_SCSI=n __scsi_print_sense() is never linked in. drivers/built-in.o: In function `hp_sw_end_io': dm-mpath-hp-sw.c:(.text+0x914f8): undefined reference to `__scsi_print_sense' Caught with a randconfig on current git. Signed-off-by: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Alasdair G Kergon <agk@redhat.com> | 20 December 2007, 17:32:09 UTC |
512875b | Jun'ichi Nomura | 13 December 2007, 14:15:25 UTC | dm: table detect io beyond device This patch fixes a panic on shrinking a DM device if there is outstanding I/O to the part of the device that is being removed. (Normally this doesn't happen - a filesystem would be resized first, for example.) The bug is that __clone_and_map() assumes dm_table_find_target() always returns a valid pointer. It may fail if a bio arrives from the block layer but its target sector is no longer included in the DM btree. This patch appends an empty entry to table->targets[] which will be returned by a lookup beyond the end of the device. After calling dm_table_find_target(), __clone_and_map() and target_message() check for this condition using dm_target_is_valid(). Sample test script to trigger oops: | 20 December 2007, 17:32:08 UTC |
3c37815 | Ivan Kokshaysky | 20 December 2007, 08:47:07 UTC | mm: fix exit_mmap BUG() on a.out binary exit The problem was introduced by commit "mm: variable length argument support" (b6a2fea39318e43fee84fa7b0b90d68bed92d2ba) as it didn't update fs/binfmt_aout.c like other binfmt's. I noticed that on alpha when accidentally launched old OSF/1 Acrobat Reader binary. Obviously, other architectures are affected as well. Signed-off-by: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Ollie Wild <aaw@google.com> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Hugh Dickins <hugh@veritas.com> Cc: Adrian Bunk <bunk@stusta.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 20 December 2007, 15:49:53 UTC |
2c3b20e | Arjan van de Ven | 20 December 2007, 14:01:17 UTC | debug: add end-of-oops marker Right now it's nearly impossible for parsers that collect kernel crashes from logs or emails (such as www.kerneloops.org) to detect the end-of-oops condition. In addition, it's not currently possible to detect whether or not 2 oopses that look alike are actually the same oops reported twice, or are truly two unique oopses. This patch adds an end-of-oops marker, and makes the end marker include a very simple 64-bit random ID to be able to detect duplicate reports. Normally, this ID is calculated as a late_initcall() (in the hope that at that time there is enough entropy to get a unique enough ID); however for early oopses the oops_exit() function needs to generate the ID on the fly. We do this all at the _end_ of an oops printout, so this does not impact our ability to get the most important portions of a crash out to the console first. [ Sidenote: the already existing oopses-since-bootup counter we print during crashes serves as the differentiator between multiple oopses that trigger during the same bootup. ] Tested on 32-bit and 64-bit x86. Artificially injected very early crashes as well, as expected they result in this constant ID after multiple bootups: ---[ end trace ca143223eefdc828 ]--- ---[ end trace ca143223eefdc828 ]--- because the random pools are still all zero. But it all still works fine and causes no additional problems (which is the main goal of instrumentation code). Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> | 20 December 2007, 14:01:17 UTC |
67e2be0 | Peter Zijlstra | 20 December 2007, 14:01:17 UTC | sched: rt: account the cpu time during the tick Realtime tasks would not account their runtime during ticks. Which would lead to: struct sched_param param = { .sched_priority = 10 }; pthread_setschedparam(pthread_self(), SCHED_FIFO, ¶m); while (1) ; Not showing up in top. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> | 20 December 2007, 14:01:17 UTC |
fbdcf18 | Mike Travis | 19 December 2007, 22:20:19 UTC | x86: fix show cpuinfo cpu number always zero when called by setup_arch) after smp_store_cpu_info() had set it to the correct value. The error shows up in 'cat /proc/cpuinfo' will all cpus = 0. Signed-off-by: Mike Travis <travis@sgi.com> Cc: Andi Kleen <ak@suse.de> Cc: Christoph Lameter <clameter@sgi.com> Cc: Jack Steiner <steiner@sgi.com> Cc: Suresh B Siddha <suresh.b.siddha@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> | 19 December 2007, 22:20:19 UTC |
3d054f0 | Adrian Bunk | 19 December 2007, 22:20:19 UTC | x86_32: disable_pse must be __cpuinitdata CONFIG_HOTPLUG_CPU=y: WARNING: vmlinux.o(.text+0xfa52): Section mismatch: reference to .init.data:disable_pse (between 'identify_cpu' and 'identify_secondary_cpu') [ akpm@linux-foundation.org: initializer fix. ] Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> | 19 December 2007, 22:20:19 UTC |
3446fa0 | Adrian Bunk | 19 December 2007, 22:20:18 UTC | x86_32: select_idle_routine() must be __cpuinit CONFIG_HOTPLUG_CPU=y: WARNING: vmlinux.o(.text+0x1199a): Section mismatch: reference to .init.text.5:select_idle_routine (between 'init_intel' and 'init_nexgen') Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> | 19 December 2007, 22:20:18 UTC |
f2206ec | Adrian Bunk | 19 December 2007, 22:20:18 UTC | x86 smpboot_32.c section fixes CONFIG_HOTPLUG_CPU=y: WARNING: vmlinux.o(.text+0x22c60): Section mismatch: reference to .init.data:cpu_idle_tasks (between 'do_boot_cpu' and 'do_warm_boot_cpu') WARNING: vmlinux.o(.text+0x22c99): Section mismatch: reference to .init.data:cpu_idle_tasks (between 'do_boot_cpu' and 'do_warm_boot_cpu') WARNING: vmlinux.o(.text+0x2359b): Section mismatch: reference to .init.data:smp_b_stepping (between 'smp_store_cpu_info' and 'cpu_exit_clear') WARNING: vmlinux.o(.text+0x235a0): Section mismatch: reference to .init.data:smp_b_stepping (between 'smp_store_cpu_info' and 'cpu_exit_clear') Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> | 19 December 2007, 22:20:18 UTC |
d533798 | Adrian Bunk | 19 December 2007, 22:20:18 UTC | x86 apic_32.c section fix CONFIG_HOTPLUG_CPU=y: WARNING: vmlinux.o(.text+0x2390d): Section mismatch: reference to .init.text.5:setup_local_APIC (between 'start_secondary' and 'check_tsc_warp') Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> | 19 December 2007, 22:20:18 UTC |
4486c5f | Linus Torvalds | 19 December 2007, 22:29:23 UTC | Merge branch 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6 * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6: [IA64] Adjust CMCI mask on CPU hotplug [IA64] make flush_tlb_kernel_range() an inline function [IA64] Guard elfcorehdr_addr with #if CONFIG_PROC_FS [IA64] Fix Altix BTE error return status [IA64] Remove assembler warnings on head.S [IA64] Remove compiler warinings about uninitialized variable in irq_ia64.c [IA64] set_thread_area fails in IA32 chroot [IA64] print kernel release in OOPS to make kerneloops.org happy [IA64] Two trivial spelling fixes [IA64] Avoid unnecessary TLB flushes when allocating memory [IA64] ia32 nopage [IA64] signal: remove redundant code in setup_sigcontext() IA64: Slim down __clear_bit_unlock | 19 December 2007, 22:29:23 UTC |
f941b16 | Alan Cox | 19 December 2007, 17:50:32 UTC | pata_hpt37x: Fix HPT374 detection Bug #9261 Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 19 December 2007, 22:29:01 UTC |
fcbe6e9 | Geoff Levand | 19 December 2007, 10:17:31 UTC | ps3fb: Fix ps3fb free_irq() dev_id The dev_id arg passed to free_irq() must match that passed to request_irq(). Fixes this PS3 error message: Trying to free already-free IRQ 44 Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 19 December 2007, 22:27:30 UTC |
9ac67a3 | Geert Uytterhoeven | 19 December 2007, 10:16:41 UTC | ps3fb: Update for firmware 2.10 ps3fb: Update for firmware 2.10 As of PS3 firmware version 2.10, the GPU command buffer size must be at least 2 MiB large. Since we use only a small part of the GPU command buffer and don't want to waste precious XDR memory, move the GPU command buffer back to the start of the XDR memory reserved for ps3fb and let the unused part overlap with the actual frame buffer. Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 19 December 2007, 22:27:30 UTC |
c7eeae7 | Linus Torvalds | 19 December 2007, 22:25:56 UTC | Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6 * git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6: [SCSI] initio: bugfix for accessors patch [SCSI] st: fix kernel BUG at include/linux/scatterlist.h:59! [SCSI] initio: fix conflict when loading driver [SCSI] sym53c8xx: fix "irq X: nobody cared" regression [SCSI] dpt_i2o: driver is only 32 bit so don't set 64 bit DMA mask [SCSI] sym53c8xx: fix free_irq() regression | 19 December 2007, 22:25:56 UTC |
3a69279 | Linus Torvalds | 19 December 2007, 22:05:13 UTC | Do dirty page accounting when removing a page from the page cache Krzysztof Oledzki noticed a dirty page accounting leak on some of his machines, causing the machine to eventually lock up when the kernel decided that there was too much dirty data, but nobody could actually write anything out to fix it. The culprit turns out to be filesystems (cough ext3 with data=journal cough) that re-dirty the page when the "->invalidatepage()" callback is called. Fix it up by doing a final dirty page accounting check when we actually remove the page from the page cache. This fixes bugzilla entry 9182: http://bugzilla.kernel.org/show_bug.cgi?id=9182 Tested-by: Ingo Molnar <mingo@elte.hu> Tested-by: Krzysztof Oledzki <olel@ans.pl> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Cc: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 19 December 2007, 22:05:13 UTC |
ed5d402 | Hidetoshi Seto | 19 December 2007, 19:42:02 UTC | [IA64] Adjust CMCI mask on CPU hotplug Currently CMCI mask of hot-added CPU is always disabled after CPU hotplug. We should adjust this mask depending on CMC polling state. Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Signed-off-by: Satoru Takeuchi <takeuchi_satoru@jp.fujitsu.com> Signed-off-by: Tony Luck <tony.luck@intel.com> | 19 December 2007, 20:30:47 UTC |
285fbd6 | Jan Beulich | 19 December 2007, 20:30:30 UTC | [IA64] make flush_tlb_kernel_range() an inline function This fixes an unused variable warning in mm/vmalloc.c. Tony: also fix resulting fallout in uncached.c with a typo in args to flush_tlb_kernel_range(). Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Tony Luck <tony.luck@intel.com> | 19 December 2007, 20:30:30 UTC |
17fbe00 | Simon Horman | 12 November 2007, 04:55:21 UTC | [IA64] Guard elfcorehdr_addr with #if CONFIG_PROC_FS Access to elfcorehdr_addr needs to be guarded by #if CONFIG_PROC_FS as well as the existing #if guards. Fixes the following build problem: arch/ia64/hp/common/built-in.o: In function `sba_init':arch/ia64/hp/common/sba_iommu.c:2043: undefined reference to `elfcorehdr_addr' :arch/ia64/hp/common/sba_iommu.c:2043: undefined reference to `elfcorehdr_addr' Signed-off-by: Simon Horman <horms@verge.net.au> Signed-off-by: Tony Luck <tony.luck@intel.com> | 19 December 2007, 19:32:52 UTC |
64135fa | Russ Anderson | 21 August 2007, 21:45:12 UTC | [IA64] Fix Altix BTE error return status The Altix shub2 BTE error detail bits are in a different location than on shub1. The current code does not take this into account resulting in all shub2 BTE failures mapping to "unknown". This patch reads the error detail bits from the proper location, so the correct BTE failure reason is returned for both shub1 and shub2. Signed-off-by: Russ Anderson <rja@sgi.com> Signed-off-by: Tony Luck <tony.luck@intel.com> | 19 December 2007, 19:19:19 UTC |
0910622 | Hidetoshi Seto | 12 December 2007, 07:28:52 UTC | [IA64] Remove assembler warnings on head.S This patch removes the following assembler warning messages. AS arch/ia64/kernel/head.o arch/ia64/kernel/head.S: Assembler messages: arch/ia64/kernel/head.S:1179: Warning: Use of 'ld8' violates RAW dependency 'CR[PTA]' (data) arch/ia64/kernel/head.S:1179: Warning: Only the first path encountering the conflict is reported arch/ia64/kernel/head.S:1178: Warning: This is the location of the conflicting usage arch/ia64/kernel/head.S:1180: Warning: Use of 'ld8' violates RAW dependency 'CR[PTA]' (data) arch/ia64/kernel/head.S:1180: Warning: Only the first path encountering the conflict is reported arch/ia64/kernel/head.S:1178: Warning: This is the location of the conflicting usage : arch/ia64/kernel/head.S:1213: Warning: Use of 'ldf.fill.nta' violates RAW dependency 'CR[PTA]' (data) arch/ia64/kernel/head.S:1213: Warning: Only the first path encountering the conflict is reported arch/ia64/kernel/head.S:1178: Warning: This is the location of the conflicting usage Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Signed-off-by: Tony Luck <tony.luck@intel.com> | 19 December 2007, 19:15:12 UTC |
373167e | Kenji Kaneshige | 22 August 2007, 10:28:36 UTC | [IA64] Remove compiler warinings about uninitialized variable in irq_ia64.c This patch removes the following compiler warning messages. CC arch/ia64/kernel/irq_ia64.o arch/ia64/kernel/irq_ia64.c: In function 'create_irq': arch/ia64/kernel/irq_ia64.c:343: warning: 'domain.bits[0u]' may be used uninitialized in this function arch/ia64/kernel/irq_ia64.c: In function 'assign_irq_vector': arch/ia64/kernel/irq_ia64.c:203: warning: 'domain.bits[0u]' may be used uninitialized in this function Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Tony Luck <tony.luck@intel.com> | 19 December 2007, 19:13:27 UTC |
e384f41 | Ian Wienand | 20 November 2007, 03:12:46 UTC | [IA64] set_thread_area fails in IA32 chroot I tried to upgrade an IA32 chroot on my IA64 to a new glibc with TLS. It kept dying because set_thread_area was returning -ESRCH (bugs.debian.org/451939). I instrumented arch/ia64/ia32/sys_ia32.c:get_free_idx() and ended up seeing output like [pid] idx desc->a desc->b ----------------------------- [2710] 0 -> c6b0ffff 40dff31b [2710] 1 -> 0 0 [2710] 2 -> 0 0 [2710] 0 -> c6b0ffff 40dff31b [2710] 1 -> c6b0ffff 40dff31b [2710] 2 -> 0 0 [2711] 0 -> c6b0ffff 40dff31b [2711] 1 -> c6b0ffff 40dff31b [2711] 2 -> 48c0ffff 40dff317 which suggested to me that TLS pointers were surviving exec() calls, leading to GDT pointers filling up and the eventual failure of get_free_idx(). I think the solution is flushing the tls array on exec. Signed-Off-By: Ian Wienand <ianw@gelato.unsw.edu.au> Signed-off-by: Tony Luck <tony.luck@intel.com> | 19 December 2007, 19:06:40 UTC |
ee211b3 | Luck, Tony | 18 December 2007, 19:46:38 UTC | [IA64] print kernel release in OOPS to make kerneloops.org happy The ia64 oops message doesn't include the kernel version, which makes it hard to automatically categorize oops messages scraped from mailing lists and bug databases. Signed-off-by: Tony Luck <tony.luck@intel.com> | 19 December 2007, 01:04:04 UTC |
313d8e5 | Joe Perches | 19 December 2007, 01:02:21 UTC | [IA64] Two trivial spelling fixes s/addres/address/ s/performanc/performance/ Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Tony Luck <tony.luck@intel.com> | 19 December 2007, 01:02:21 UTC |
aec103b | de Dinechin, Christophe (Integrity VM) | 13 December 2007, 15:03:07 UTC | [IA64] Avoid unnecessary TLB flushes when allocating memory Improve performance of memory allocations on ia64 by avoiding a global TLB purge to purge a single page from the file cache. This happens whenever we evict a page from the buffer cache to make room for some other allocation. Test case: Run 'find /usr -type f | xargs cat > /dev/null' in the background to fill the buffer cache, then run something that uses memory, e.g. 'gmake -j50 install'. Instrumentation showed that the number of global TLB purges went from a few millions down to about 170 over a 12 hours run of the above. The performance impact is particularly noticeable under virtualization, because a virtual TLB is generally both larger and slower to purge than a physical one. Signed-off-by: Christophe de Dinechin <ddd@hp.com> Signed-off-by: Tony Luck <tony.luck@intel.com> | 19 December 2007, 00:56:50 UTC |
3cdc7fc | Nick Piggin | 13 December 2007, 23:58:27 UTC | [IA64] ia32 nopage Convert ia64's ia32 support from nopage to fault. Signed-off-by: Nick Piggin <npiggin@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Tony Luck <tony.luck@intel.com> | 19 December 2007, 00:55:46 UTC |
2018df7 | Shi Weihua | 13 December 2007, 23:58:26 UTC | [IA64] signal: remove redundant code in setup_sigcontext() This patch removes some redundant code in the function setup_sigcontext(). The registers ar.ccv,b7,r14,ar.csd,ar.ssd,r2-r3 and r16-r31 are not restored in restore_sigcontext() when (flags & IA64_SC_FLAG_IN_SYSCALL) is true. So we don't need to zero those variables in setup_sigcontext(). Signed-off-by: Shi Weihua <shiwh@cn.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Tony Luck <tony.luck@intel.com> | 19 December 2007, 00:55:15 UTC |
a3ebdb6 | Christoph Lameter | 19 December 2007, 00:22:46 UTC | IA64: Slim down __clear_bit_unlock __clear_bit_unlock does not need to perform atomic operations on the variable. Avoid a cmpxchg and simply do a store with release semantics. Add a barrier to be safe that the compiler does not do funky things. Tony: Use intrinsic rather than inline assembler Signed-off-by: Christoph Lameter <clameter@sgi.com> Acked-by: Nick Piggin <nickpiggin@yahoo.com.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Tony Luck <tony.luck@intel.com> | 19 December 2007, 00:22:46 UTC |
a169e63 | Boaz Harrosh | 17 December 2007, 16:08:59 UTC | [SCSI] initio: bugfix for accessors patch patch: [SCSI] initio: convert to use the data buffer accessors had a small but fatal bug in that it didn't increment the pointer into the initio scatterlist descriptors as it looped over the block generated ones. Fixed here. Signed-off-by: Boaz Harrosh <bharrosh@panasas.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com> | 18 December 2007, 22:04:15 UTC |
cd81621 | FUJITA Tomonori | 15 December 2007, 06:51:55 UTC | [SCSI] st: fix kernel BUG at include/linux/scatterlist.h:59! This is caused by a missing scatterlist initialisation (it only shows up when sg list handling debugging is turned on). Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Cc: Kai Makisara <Kai.Makisara@kolumbus.fi> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com> | 18 December 2007, 22:04:13 UTC |
99f1f53 | Alan Cox | 14 December 2007, 00:14:05 UTC | [SCSI] initio: fix conflict when loading driver > I have a scanner connected to a Initio INI-950 SCSI card and I recently > upgraded from SuSE 10.2 to 10.3. The new kernel doesn't see any of my > devices. I get the following in /var/log/messages: > > ACPI: PCI Interrupt 0000:00:0a.0[A] -> GSI 17 (level, low) -> IRQ 16 > initio: I/O port range 0x0 is busy. > ACPI: PCI interrupt for device 0000:00:0a.0 disabled Humm not a collision - thats a bug in the driver updating. Looks like the changes I made and combined with Christoph's lost a line somewhere when I was merging it all. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com> | 18 December 2007, 22:04:11 UTC |
cedefa1 | Tony Battersby | 14 December 2007, 20:45:16 UTC | [SCSI] sym53c8xx: fix "irq X: nobody cared" regression The patch described by the following excerpt from ChangeLog-2.6.24-rc1 eventually causes a "irq X: nobody cared" error after a while: commit 99c9e0a1d6cfe1ba1169a7a81435ee85bc00e4a1 Author: Matthew Wilcox <matthew@wil.cx> Date: Fri Oct 5 15:55:12 2007 -0400 [SCSI] sym53c8xx: Make interrupt handler capable of returning IRQ_NONE After this happens, the kernel disables the IRQ, causing the SCSI card to stop working until the next reboot. The problem is caused by the interrupt handler returning IRQ_NONE instead of IRQ_HANDLED after handling an interrupt-on-the-fly (INTF) condition. The following patch fixes the problem. Signed-off-by: Tony Battersby <tonyb@cybernetics.com> Acked-by: Matthew Wilcox <willy@linux.intel.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com> | 18 December 2007, 22:04:09 UTC |
c80ddf0 | James Bottomley | 12 December 2007, 20:06:21 UTC | [SCSI] dpt_i2o: driver is only 32 bit so don't set 64 bit DMA mask This fixes a potential corruption bug where the truncation would cause reading or writing to the wrong memory area on machines with >4GB of main memory. Cc: Stable Kernel Tree <stable@kernel.org> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com> | 18 December 2007, 22:04:08 UTC |
7ee2413 | Tony Battersby | 06 November 2007, 19:40:54 UTC | [SCSI] sym53c8xx: fix free_irq() regression The following commit changed the pointer passed to request_irq(), but failed to change the pointer passed to free_irq(): commit 99c9e0a1d6cfe1ba1169a7a81435ee85bc00e4a1 Author: Matthew Wilcox <matthew@wil.cx> Date: Fri Oct 5 15:55:12 2007 -0400 [SCSI] sym53c8xx: Make interrupt handler capable of returning IRQ_NONE ... The result is that free_irq() doesn't actually take any action. This patch fixes it. Signed-off-by: Tony Battersby <tonyb@cybernetics.com> Acked-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com> | 18 December 2007, 22:03:09 UTC |
3e3b391 | Linus Torvalds | 18 December 2007, 17:42:44 UTC | Merge git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-x86 * git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-x86: x86: fix "Kernel panic - not syncing: IO-APIC + timer doesn't work!" genirq: revert lazy irq disable for simple irqs x86: also define AT_VECTOR_SIZE_ARCH x86: kprobes bugfix x86: jprobe bugfix timer: kernel/timer.c section fixes genirq: add unlocked version of set_irq_handler() clockevents: fix reprogramming decision in oneshot broadcast oprofile: op_model_athlon.c support for AMD family 10h barcelona performance counters | 18 December 2007, 17:42:44 UTC |
4aae070 | Ingo Molnar | 18 December 2007, 17:05:58 UTC | x86: fix "Kernel panic - not syncing: IO-APIC + timer doesn't work!" this is the tale of a full day spent debugging an ancient but elusive bug. after booting up thousands of random .config kernels, i finally happened to generate a .config that produced the following rare bootup failure on 32-bit x86: | ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 | ..MP-BIOS bug: 8254 timer not connected to IO-APIC | ...trying to set up timer (IRQ0) through the 8259A ... failed. | ...trying to set up timer as Virtual Wire IRQ... failed. | ...trying to set up timer as ExtINT IRQ... failed :(. | Kernel panic - not syncing: IO-APIC + timer doesn't work! Boot with apic=debug | and send a report. Then try booting with the 'noapic' option this bug has been reported many times during the years, but it was never reproduced nor fixed. the bug that i hit was extremely sensitive to .config details. First i did a .config-bisection - suspecting some .config detail. That led to CONFIG_X86_MCE: enabling X86_MCE magically made the bug disappear and the system would boot up just fine. Debugging my way through the MCE code ended up identifying two unlikely candidates: the thing that made a real difference to the hang was that X86_MCE did two printks: Intel machine check architecture supported. Intel machine check reporting enabled on CPU#1. Adding the same printks to a !CONFIG_X86_MCE kernel made the bug go away! this left timing as the main suspect: i experimented with adding various udelay()s to the arch/x86/kernel/io_apic_32.c:check_timer() function, and the race window turned out to be narrower than 30 microseconds (!). That made debugging especially funny, debugging without having printk ability before the bug hits is ... interesting ;-) eventually i started suspecting IRQ activities - those are pretty much the only thing that happen this early during bootup and have the timescale of a few dozen microseconds. Also, check_timer() changes the IRQ hardware in various creative ways, so the main candidate became IRQ0 interaction. i've added a counter to track timer irqs (on which core they arrived, at what exact time, etc.) and found that no timer IRQ would arrive after the bug condition hits - even if we re-enable IRQ0 and re-initialize the i8259A, but that we'd get a small number of timer irqs right around the time when we call the check_timer() function. Eventually i got the following backtrace triggered from debug code in the timer interrupt: ...trying to set up timer as Virtual Wire IRQ... failed. ...trying to set up timer as ExtINT IRQ... Pid: 1, comm: swapper Not tainted (2.6.24-rc5 #57) EIP: 0060:[<c044d57e>] EFLAGS: 00000246 CPU: 0 EIP is at _spin_unlock_irqrestore+0x5/0x1c EAX: c0634178 EBX: 00000000 ECX: c4947d63 EDX: 00000246 ESI: 00000002 EDI: 00010031 EBP: c04e0f2e ESP: f7c41df4 DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068 CR0: 8005003b CR2: ffe04000 CR3: 00630000 CR4: 000006d0 DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000 DR6: ffff0ff0 DR7: 00000400 [<c05f5784>] setup_IO_APIC+0x9c3/0xc5c the spin_unlock() was called from init_8259A(). Wait ... we have an IRQ0 entry while we are in the middle of setting up the local APIC, the i8259A and the PIT?? That is certainly not how it's supposed to work! check_timer() was supposed to be called with irqs turned off - but this eroded away sometime in the past. This code would still work most of the time because this code runs very quickly, but just the right timing conditions are present and IRQ0 hits in this small, ~30 usecs window, timer irqs stop and the system does not boot up. Also, given how early this is during bootup, the hang is very deterministic - but it would only occur on certain machines (and certain configs). The fix was quite simple: disable/restore interrupts properly in this function. With that in place the test-system now boots up just fine. (64-bit x86 io_apic_64.c had the same bug.) Phew! One down, only 1500 other kernel bugs are left ;-) Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> | 18 December 2007, 17:05:58 UTC |
971e5b3 | Steven Rostedt | 18 December 2007, 17:05:58 UTC | genirq: revert lazy irq disable for simple irqs In commit 76d2160147f43f982dfe881404cfde9fd0a9da21 lazy irq disabling was implemented, and the simple irq handler had a masking set to it. Remy Bohmer discovered that some devices in the ARM architecture would trigger the mask, but never unmask it. His patch to do the unmasking was questioned by Russell King about masking simple irqs to begin with. Looking further, it was discovered that the problems Remy was seeing was due to improper use of the simple handler by devices, and he later submitted patches to fix those. But the issue that was uncovered was that the simple handler should never mask. This patch reverts the masking in the simple handler. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> | 18 December 2007, 17:05:58 UTC |
213fde7 | Jan Beulich | 18 December 2007, 17:05:58 UTC | x86: also define AT_VECTOR_SIZE_ARCH The patch introducing this left out 64-bit x86 despite it also having extra entries. this solves Xen guest troubles. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> | 18 December 2007, 17:05:58 UTC |
0b0122f | Masami Hiramatsu | 18 December 2007, 17:05:58 UTC | x86: kprobes bugfix Kprobes for x86-64 may cause a kernel crash if it inserted on "iret" instruction. "call absolute" is invalid on x86-64, so we don't need treat it. - Change the processing order as same as x86-32. - Add "iret"(0xcf) case. - Remove next_rip local variable. Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> | 18 December 2007, 17:05:58 UTC |
29b6cd7 | Masami Hiramatsu | 18 December 2007, 17:05:58 UTC | x86: jprobe bugfix jprobe for x86-64 may cause kernel page fault when the jprobe_return() is called from incorrect function. - Use jprobe_saved_regs instead getting it from stack. (Especially on x86-64, it may get incorrect data, because pt_regs can not be get by using container_of(rsp)) - Change the type of stack pointer to unsigned long *. Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> | 18 December 2007, 17:05:58 UTC |
b4be625 | Adrian Bunk | 18 December 2007, 17:05:58 UTC | timer: kernel/timer.c section fixes This patch fixes the following section mismatches with CONFIG_HOTPLUG=n, CONFIG_HOTPLUG_CPU=y: ... WARNING: vmlinux.o(.text+0x41cd3): Section mismatch: reference to .init.data:tvec_base_done.22610 (between 'timer_cpu_notify' and 'run_timer_softirq') WARNING: vmlinux.o(.text+0x41d67): Section mismatch: reference to .init.data:tvec_base_done.22610 (between 'timer_cpu_notify' and 'run_timer_softirq') ... Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> | 18 December 2007, 17:05:58 UTC |
b019e57 | Kevin Hilman | 18 December 2007, 17:05:58 UTC | genirq: add unlocked version of set_irq_handler() Add unlocked version for use by irq_chip.set_type handlers which may wish to change handler to level or edge handler when IRQ type is changed. The normal set_irq_handler() call cannot be used because it tries to take irq_desc.lock which is already held when the irq_chip.set_type hook is called. Signed-off-by: Kevin Hilman <khilman@mvista.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> | 18 December 2007, 17:05:58 UTC |
cdc6f27 | Thomas Gleixner | 18 December 2007, 17:05:58 UTC | clockevents: fix reprogramming decision in oneshot broadcast Resolve the following regression of a choppy, almost unusable laptop: http://lkml.org/lkml/2007/12/7/299 http://bugzilla.kernel.org/show_bug.cgi?id=9525 A previous version of the code did the reprogramming of the broadcast device in the return from idle code. This was removed, but the logic in tick_handle_oneshot_broadcast() was kept the same. When a broadcast interrupt happens we signal the expiry to all CPUs which have an expired event. If none of the CPUs has an expired event, which can happen in dyntick mode, then we reprogram the broadcast device. We do not reprogram otherwise, but this is only correct if all CPUs, which are in the idle broadcast state have been woken up. The code ignores, that there might be pending not yet expired events on other CPUs, which are in the idle broadcast state. So the delivery of those events can be delayed for quite a time. Change the tick_handle_oneshot_broadcast() function to check for CPUs, which are in broadcast state and are not woken up by the current event, and enforce the rearming of the broadcast device for those CPUs. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@elte.hu> | 18 December 2007, 17:05:58 UTC |
bd87f1f | Barry Kasindorf | 18 December 2007, 17:05:58 UTC | oprofile: op_model_athlon.c support for AMD family 10h barcelona performance counters This patch is for controlling the upper 32bits of the event ctrl msrs. This includes the upper 4 bits of the event select and the Guest Only and Host Only bits This patch is necessary to make Event Based Profiling work reliably on a Family 10h processor [akpm@linux-foundation.org: checkpatch.pl fixes] Signed-off-by: Barry Kasindorf <barry.kasindorf@amd.com> Signed-off-by: Robert Richter <robert.richter@amd.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> | 18 December 2007, 17:05:58 UTC |
51dad80 | Linus Torvalds | 18 December 2007, 16:11:01 UTC | Merge git://git.kernel.org/pub/scm/linux/kernel/git/mingo/linux-2.6-sched * git://git.kernel.org/pub/scm/linux/kernel/git/mingo/linux-2.6-sched: sched: do not hurt SCHED_BATCH on wakeup sched: touch softlockup watchdog after idling sched: sysctl, proc_dointvec_minmax() expects int values for sched: mark rwsem functions as __sched for wchan/profiling sched: fix crash on ia64, introduce task_current() | 18 December 2007, 16:11:01 UTC |
3c615e1 | Linus Torvalds | 18 December 2007, 16:04:24 UTC | Merge branch 'for-linus' of git://git.kernel.dk/linux-2.6-block * 'for-linus' of git://git.kernel.dk/linux-2.6-block: Cleanup umem driver: fix most checkpatch warnings, conform to kernel block: let elv_register() return void as-iosched: fix write batch start point as-iosched: fix incorrect comments block: use jiffies conversion functions in scsi_ioctl.c | 18 December 2007, 16:04:24 UTC |
5768091 | Linus Torvalds | 18 December 2007, 16:03:32 UTC | Merge branch 'for-linus' of git://oss.sgi.com:8090/xfs/xfs-2.6 * 'for-linus' of git://oss.sgi.com:8090/xfs/xfs-2.6: [XFS] Put the correct offset in dirent d_off [XFS] Don't wait for pending I/Os when purging blocks beyond eof. | 18 December 2007, 16:03:32 UTC |
d556533 | Linus Torvalds | 18 December 2007, 16:03:01 UTC | Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc: mmc: remove unused 'mode' from the mmc_host structure sdhci: support JMicron JMB38x chips sdhci: use PIO when DMA can't satisfy the request sdhci: don't warn about sdhci 2.0 controllers sdhci: describe quirks | 18 December 2007, 16:03:01 UTC |
6cbf1c1 | Ingo Molnar | 18 December 2007, 14:21:13 UTC | sched: do not hurt SCHED_BATCH on wakeup measurements by Yanmin Zhang have shown that SCHED_BATCH tasks benefit if they run the same place_entity() logic as SCHED_OTHER tasks - so uniformize behavior in this area. Signed-off-by: Ingo Molnar <mingo@elte.hu> | 18 December 2007, 14:21:13 UTC |
2bacec8 | Ingo Molnar | 18 December 2007, 14:21:13 UTC | sched: touch softlockup watchdog after idling touch softlockup watchdog after idling. Signed-off-by: Ingo Molnar <mingo@elte.hu> | 18 December 2007, 14:21:13 UTC |
73c4efd | Eric Dumazet | 18 December 2007, 14:21:13 UTC | sched: sysctl, proc_dointvec_minmax() expects int values for min_sched_granularity_ns, max_sched_granularity_ns, min_wakeup_granularity_ns and max_wakeup_granularity_ns are declared "unsigned long". This is incorrect since proc_dointvec_minmax() expects plain "int" guard values. This bug only triggers on big endian 64 bit arches. Signed-off-by: Eric Dumazet <dada1@cosmosbay.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> | 18 December 2007, 14:21:13 UTC |
c7af77b | Livio Soares | 18 December 2007, 14:21:13 UTC | sched: mark rwsem functions as __sched for wchan/profiling This following commit http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commitdiff;h=fdf8cb0909b531f9ae8f9b9d7e4eb35ba3505f07 un-inlined a low-level rwsem function, but did not mark it as __sched. The result is that it now shows up as thread wchan (which also affects /proc/profile stats). The following simple patch fixes this by properly marking rwsem_down_failed_common() as a __sched function. Also in this patch, which is up for discussion, marks down_read() and down_write() proper as __sched. For profiling, it is pretty much useless to know that a semaphore is beig help - it is necessary to know _which_ one. By going up another frame on the stack, the information becomes much more useful. In summary, the below change to lib/rwsem.c should be applied; the changes to kernel/rwsem.c could be applied if other kernel hackers agree with my proposal that down_read()/down_write() in the profile is not enough. [ akpm@linux-foundation.org: build fix ] Signed-off-by: Livio Soares <livio@eecg.toronto.edu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu> | 18 December 2007, 14:21:13 UTC |
051a1d1 | Dmitry Adamushko | 18 December 2007, 14:21:13 UTC | sched: fix crash on ia64, introduce task_current() Some services (e.g. sched_setscheduler(), rt_mutex_setprio() and sched_move_task()) must handle a given task differently in case it's the 'rq->curr' task on its run-queue. The task_running() interface is not suitable for determining such tasks for platforms with one of the following options: #define __ARCH_WANT_UNLOCKED_CTXSW #define __ARCH_WANT_INTERRUPTS_ON_CTXSW Due to the fact that it makes use of 'p->oncpu == 1' as a criterion but such a task is not necessarily 'rq->curr'. The detailed explanation is available here: https://lists.linux-foundation.org/pipermail/containers/2007-December/009262.html Signed-off-by: Dmitry Adamushko <dmitry.adamushko@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Tested-by: Dhaval Giani <dhaval@linux.vnet.ibm.com> Tested-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> | 18 December 2007, 14:21:13 UTC |
458cf5e | Randy Dunlap | 17 December 2007, 19:24:20 UTC | Cleanup umem driver: fix most checkpatch warnings, conform to kernel coding style. linux-2.6.24-rc5-git3> checkpatch.pl-next patches/block-umem-ckpatch.patch total: 0 errors, 5 warnings, 530 lines checked All of these are line-length warnings. Only change in generated object file is due to not initializing a static global variable to 0. Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com> | 18 December 2007, 07:29:28 UTC |
2fdd82b | Adrian Bunk | 12 December 2007, 17:51:56 UTC | block: let elv_register() return void elv_register() always returns 0, and there isn't anything it does where it should return an error (the only error condition is so grave that it's handled with a BUG_ON). Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Jens Axboe <jens.axboe@oracle.com> | 18 December 2007, 07:29:28 UTC |
4956512 | Aaron Carroll | 05 December 2007, 10:07:07 UTC | as-iosched: fix write batch start point New write batches currently start from where the last one completed. We have no idea where the head is after switching batches, so this makes little sense. Instead, start the next batch from the request with the earliest deadline in the hope that we avoid a deadline expiry later on. Signed-off-by: Aaron Carroll <aaronc@gelato.unsw.edu.au> Acked-by: Nick Piggin <npiggin@suse.de> Signed-off-by: Jens Axboe <jens.axboe@oracle.com> | 18 December 2007, 07:29:28 UTC |
8896f3c | Aaron Carroll | 05 December 2007, 10:06:50 UTC | as-iosched: fix incorrect comments Two comments refer to deadlines applying to reads only. This is not the case. Signed-off-by: Aaron Carroll <aaronc@gelato.unsw.edu.au> Acked-by: Nick Piggin <npiggin@suse.de> Signed-off-by: Jens Axboe <jens.axboe@oracle.com> | 18 December 2007, 07:29:28 UTC |
24bb8fb | Tejun Heo | 05 December 2007, 20:28:24 UTC | block: use jiffies conversion functions in scsi_ioctl.c Use msecs_to_jiffies() and jiffies_to_msecs() in scsi_ioctl(). Sometimes callers use very large values for e.g. vendor specific media clear command and calculation can overflow. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com> | 18 December 2007, 07:29:28 UTC |
041388b | Lachlan McIlroy | 18 December 2007, 05:19:34 UTC | [XFS] Put the correct offset in dirent d_off The recent filldir regression fix was not putting the correct d_off in each dirent. This was resulting in incorrect cookies being passed to dmapi ioctls and the wrong offset appearing in the dirents. readdir was unaffected as the filp->f_pos was being updated with the correct offset and this was being written into the last dirent in each buffer. Fix the XFS code to do the right thing. SGI-PV: 973746 SGI-Modid: xfs-linux-melb:xfs-kern:30240a Signed-off-by: David Chinner <dgc@sgi.com> Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com> | 18 December 2007, 06:16:23 UTC |
c734c79 | Lachlan McIlroy | 18 December 2007, 05:17:41 UTC | [XFS] Don't wait for pending I/Os when purging blocks beyond eof. On last close of a file we purge blocks beyond eof. The same code is used when we truncate the file size down. In this case we need to wait for any pending I/Os for dirty pages beyond the new eof. For the last close case we are not changing the file size and therefore do not need to wait for any I/Os to complete. This fixes a performance bottleneck where writes into the page cache and cache flushes can become mutually exclusive. SGI-PV: 964002 SGI-Modid: xfs-linux-melb:xfs-kern:30220a Signed-off-by: Lachlan McIlroy <lachlan@sgi.com> Signed-off-by: Peter Leckie <pleckie@sgi.com> | 18 December 2007, 06:16:17 UTC |
c63a119 | Linus Torvalds | 18 December 2007, 03:29:41 UTC | Merge branch 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/netdev-2.6 * 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/netdev-2.6: (23 commits) iwlwifi: fix rf_kill state inconsistent during suspend and resume b43: Fix rfkill radio LED bcm43xx_debugfs sscanf fix libertas: select WIRELESS_EXT iwlwifi3945/4965: fix rate control algo reference leak ieee80211_rate: missed unlock wireless/ipw2200.c: add __dev{init,exit} annotations zd1211rw: Fix alignment problems libertas: add Dan Williams as maintainer sis190 endianness ucc_geth: really fix section mismatch pcnet_cs: add new id ixgb: make sure jumbos stay enabled after reset Net: ibm_newemac, remove SPIN_LOCK_UNLOCKED net: smc911x: shut up compiler warnings ucc_geth: minor whitespace fix drivers/net/s2io.c section fixes drivers/net/sis190.c section fix hamachi endianness fixes e100: free IRQ to remove warningwhenrebooting ... | 18 December 2007, 03:29:41 UTC |
ededa4d | Linus Torvalds | 18 December 2007, 03:29:32 UTC | Merge branch 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev * 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev: libata: fix ATAPI draining libata: update atapi_eh_request_sense() such that lbam/lbah contains buffer size libata-acpi: implement _GTF command filtering libata-acpi: improve _GTF execution error handling and reporting libata-acpi: improve ACPI disabling libata-acpi: implement dev->gtf_cache and evaluate _GTF right after _STM during resume libata-acpi: implement and use ata_acpi_init_gtm() libata-acpi: add new hooks ata_acpi_dissociate() and ata_acpi_on_disable() libata: ata_dev_disable() should be called from EH context libata: add more opcodes to ata.h libata: update ata_*_printk() macros such that level can be a variable libata-acpi: adjust constness in ata_acpi_gtm/stm() parameters sata_mv: improve warnings about Highpoint RocketRAID 23xx cards libata: add ST3160023AS / 3.42 to NCQ blacklist libata: clear link->eh_info.serror from ata_std_postreset() sata_sil: fix spurious IRQ handling | 18 December 2007, 03:29:32 UTC |
64396ac | Eric W. Biederman | 18 December 2007, 00:20:28 UTC | sysctl: fix ax25 checks Fix: sysctl table check failed: /net/ax25/ax0/ax25_default_mode .3.9.1.2 Unknown sysctl binary path Pid: 2936, comm: kissattach Not tainted 2.6.24-rc5 #1 [<c012ca6a>] set_fail+0x3b/0x43 [<c012ce7a>] sysctl_check_table+0x408/0x456 [<c012ce8e>] sysctl_check_table+0x41c/0x456 [<c012ce8e>] sysctl_check_table+0x41c/0x456 ... Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Cc: Bernard Pidoux <pidoux@ccr.jussieu.fr> Cc: "David S. Miller" <davem@davemloft.net> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 18 December 2007, 03:28:17 UTC |
421d991 | Christoph Lameter | 18 December 2007, 00:20:27 UTC | quicklist: Set tlb->need_flush if pages are remaining in quicklist 0 This ensures that the quicklists are drained. Otherwise draining may only occur when the processor reaches an idle state. Fixes fatal leakage of pgd_t's on 2.6.22 and later. Signed-off-by: Christoph Lameter <clameter@sgi.com> Reported-by: Dhaval Giani <dhaval@linux.vnet.ibm.com> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 18 December 2007, 03:28:17 UTC |
3811dbf | Christoph Lameter | 18 December 2007, 00:20:27 UTC | SLUB: remove useless masking of GFP_ZERO Remove a recently added useless masking of GFP_ZERO. GFP_ZERO is already masked out in new_slab() (See how it calls allocate_slab). No need to do it twice. This reverts the SLUB parts of 7fd272550bd43cc1d7289ef0ab2fa50de137e767. Cc: Matt Mackall <mpm@selenic.com> Reviewed-by: Pekka Enberg <penberg@cs.helsinki.fi> Signed-off-by: Christoph Lameter <clameter@sgi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 18 December 2007, 03:28:17 UTC |
087ee8d | Jan Kara | 18 December 2007, 00:20:26 UTC | Fix compilation warning in dquot.c Fix compilation warning about discarded const. Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 18 December 2007, 03:28:17 UTC |
d5dbac8 | Nishanth Aravamudan | 18 December 2007, 00:20:25 UTC | Documentation: update hugetlb information The hugetlb documentation has gotten a bit out of sync with the current code. Updated the sysctl file to refer to Documentation/vm/hugetlbpage.txt. Update that file to contain the current state of affairs (with the newer named sysctl in place). Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com> Acked-by: Adam Litke <agl@us.ibm.com> Cc: William Lee Irwin III <wli@holomorphy.com> Cc: Dave Hansen <haveblue@us.ibm.com> Cc: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 18 December 2007, 03:28:17 UTC |
368d2c6 | Nishanth Aravamudan | 18 December 2007, 00:20:22 UTC | Revert "hugetlb: Add hugetlb_dynamic_pool sysctl" This reverts commit 54f9f80d6543fb7b157d3b11e2e7911dc1379790 ("hugetlb: Add hugetlb_dynamic_pool sysctl") Given the new sysctl nr_overcommit_hugepages, the boolean dynamic pool sysctl is not needed, as its semantics can be expressed by 0 in the overcommit sysctl (no dynamic pool) and non-0 in the overcommit sysctl (pool enabled). (Needed in 2.6.24 since it reverts a post-2.6.23 userspace-visible change) Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com> Acked-by: Adam Litke <agl@us.ibm.com> Cc: William Lee Irwin III <wli@holomorphy.com> Cc: Dave Hansen <haveblue@us.ibm.com> Cc: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 18 December 2007, 03:28:17 UTC |
d1c3fb1 | Nishanth Aravamudan | 18 December 2007, 00:20:12 UTC | hugetlb: introduce nr_overcommit_hugepages sysctl hugetlb: introduce nr_overcommit_hugepages sysctl While examining the code to support /proc/sys/vm/hugetlb_dynamic_pool, I became convinced that having a boolean sysctl was insufficient: 1) To support per-node control of hugepages, I have previously submitted patches to add a sysfs attribute related to nr_hugepages. However, with a boolean global value and per-mount quota enforcement constraining the dynamic pool, adding corresponding control of the dynamic pool on a per-node basis seems inconsistent to me. 2) Administration of the hugetlb dynamic pool with multiple hugetlbfs mount points is, arguably, more arduous than it needs to be. Each quota would need to be set separately, and the sum would need to be monitored. To ease the administration, and to help make the way for per-node control of the static & dynamic hugepage pool, I added a separate sysctl, nr_overcommit_hugepages. This value serves as a high watermark for the overall hugepage pool, while nr_hugepages serves as a low watermark. The boolean sysctl can then be removed, as the condition nr_overcommit_hugepages > 0 indicates the same administrative setting as hugetlb_dynamic_pool == 1 Quotas still serve as local enforcement of the size of the pool on a per-mount basis. A few caveats: 1) There is a race whereby the global surplus huge page counter is incremented before a hugepage has allocated. Another process could then try grow the pool, and fail to convert a surplus huge page to a normal huge page and instead allocate a fresh huge page. I believe this is benign, as no memory is leaked (the actual pages are still tracked correctly) and the counters won't go out of sync. 2) Shrinking the static pool while a surplus is in effect will allow the number of surplus huge pages to exceed the overcommit value. As long as this condition holds, however, no more surplus huge pages will be allowed on the system until one of the two sysctls are increased sufficiently, or the surplus huge pages go out of use and are freed. Successfully tested on x86_64 with the current libhugetlbfs snapshot, modified to use the new sysctl. Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com> Acked-by: Adam Litke <agl@us.ibm.com> Cc: William Lee Irwin III <wli@holomorphy.com> Cc: Dave Hansen <haveblue@us.ibm.com> Cc: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 18 December 2007, 03:28:17 UTC |
7a3f595 | Eric Sandeen | 18 December 2007, 00:20:10 UTC | ecryptfs: fix fsx data corruption problems ecryptfs in 2.6.24-rc3 wasn't surviving fsx for me at all, dying after 4 ops. Generally, encountering problems with stale data and improperly zeroed pages. An extending truncate + write for example would expose stale data. With the changes below I got to a million ops and beyond with all mmap ops disabled - mmap still needs work. (A version of this patch on a RHEL5 kernel ran for over 110 million fsx ops) I added a few comments as well, to the best of my understanding as I read through the code. Signed-off-by: Eric Sandeen <sandeen@redhat.com> Acked-by: Michael Halcrow <mhalcrow@us.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 18 December 2007, 03:28:17 UTC |
8998979 | Nathan Lynch | 18 December 2007, 00:20:09 UTC | fix bloat-o-meter for ppc64 bloat-o-meter assumes that a '.' anywhere in a symbol's name means that it is static and prepends 'static.' to the first part of the symbol name, discarding the portion of the name that follows the '.'. However, the names of function entry points begin with '.' in the ppc64 ABI. This causes all function text size changes to be accounted to a single 'static.' entry in the output when comparing ppc64 kernels. Change getsizes() to ignore the first character of the symbol name when searching for '.'. Signed-off-by: Nathan Lynch <ntl@pobox.com> Cc: Matt Mackall <mpm@selenic.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 18 December 2007, 03:28:17 UTC |
bb8e8bc | Shannon Nelson | 18 December 2007, 00:20:08 UTC | I/OAT: fix null device in call to dev_err() We can't use the device in a dev_err() after a kzalloc failure or after the kfree, so simplify it to the pdev that was originally passed in. Cc: Eric Sesterhenn <snakebyte@gmx.de> Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 18 December 2007, 03:28:17 UTC |
711924b | Shannon Nelson | 18 December 2007, 00:20:08 UTC | I/OAT: fixups from code comments A few fixups from Andrew's code comments. - removed "static inline" forward-declares - changed use of min() to min_t() - removed some unnecessary NULL initializations - removed a couple of BUG() calls Fixes this: drivers/dma/ioat_dma.c: In function `ioat1_tx_submit': drivers/dma/ioat_dma.c:177: sorry, unimplemented: inlining failed in call to '__ioat1_dma_memcpy_issue_pending': function body not available drivers/dma/ioat_dma.c:268: sorry, unimplemented: called from here Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Cc: "Williams, Dan J" <dan.j.williams@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 18 December 2007, 03:28:17 UTC |
7c9e70e | Eric Sandeen | 18 December 2007, 00:20:07 UTC | ecryptfs: set s_blocksize from lower fs in sb eCryptfs wasn't setting s_blocksize in it's superblock; just pick it up from the lower FS. Having an s_blocksize of 0 made things like "filefrag" which call FIGETBSZ unhappy. Signed-off-by: Eric Sandeen <sandeen@redhat.com> Acked-by: Mike Halcrow <mhalcrow@us.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 18 December 2007, 03:28:17 UTC |
81eabcb | Mel Gorman | 18 December 2007, 00:20:05 UTC | mm: fix page allocation for larger I/O segments In some cases the IO subsystem is able to merge requests if the pages are adjacent in physical memory. This was achieved in the allocator by having expand() return pages in physically contiguous order in situations were a large buddy was split. However, list-based anti-fragmentation changed the order pages were returned in to avoid searching in buffered_rmqueue() for a page of the appropriate migrate type. This patch restores behaviour of rmqueue_bulk() preserving the physical order of pages returned by the allocator without incurring increased search costs for anti-fragmentation. Signed-off-by: Mel Gorman <mel@csn.ul.ie> Cc: James Bottomley <James.Bottomley@steeleye.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Mark Lord <mlord@pobox.com Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 18 December 2007, 03:28:16 UTC |
8d93662 | Adam Jackson | 18 December 2007, 00:20:04 UTC | apm_event{,info}_t are userspace types These types define the size of data read from /dev/apm_bios. They should not be hidden behind #ifdef __KERNEL__. This is killing my xserver compile, apm_event_t is used in the xserver source. Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 18 December 2007, 03:28:16 UTC |
a332347 | Adrian Bunk | 18 December 2007, 00:20:03 UTC | drivers/cpufreq/cpufreq_stats.c section fix cpufreq_stats_free_table() mustn't be __cpuexit since it's called by the __cpuinit cpufreq_stat_cpu_callback(). This patch fixes the following section mismatch reported by Chris Clayton: WARNING: vmlinux.o(.init.text+0x143dd): Section mismatch: reference to .exit.text:cpufreq_stats_free_table (between 'cpufreq_stat_cpu_callback' and 'cpufreq_stats_init') Signed-off-by: Adrian Bunk <bunk@kernel.org> Cc: Chris Clayton <chris2553@googlemail.com> Acked-by: Dave Jones <davej@codemonkey.org.uk> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 18 December 2007, 03:28:16 UTC |
771cceb | Julia Lawall | 18 December 2007, 00:20:02 UTC | drivers/macintosh/via-pmu.c: Added a missing iounmap The error handling code should undo the ioremap as well. The problem was detected using the following semantic match (http://www.emn.fr/x-info/coccinelle/) // <smpl> @@ type T,T1,T2; identifier E; statement S; expression x1,x2; constant C; int ret; @@ T E; ... * E = ioremap(...); if (E == NULL) S ... when != iounmap(E) when != if (E != NULL) { ... iounmap(E); ...} when != x1 = (T1)E if (...) { ... when != iounmap(E) when != if (E != NULL) { ... iounmap(E); ...} when != x2 = (T2)E ( * return; | * return C; | * return ret; ) } // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Cc: Johannes Berg <johannes@sipsolutions.net> Cc: Olaf Hering <olaf@aepfle.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 18 December 2007, 03:28:16 UTC |
d17a18d | Dave Young | 18 December 2007, 00:20:00 UTC | pktcdvd: add kobject_put when kobject register fails In kobject_register, the kobject reference is get in kobject_init, and then kobject_add. If kobject_add fail, it will only cleanup the reference got by itself. Signed-off-by: Dave Young <hidave.darkstar@gmail.com> Reviewed-by: Pekka Enberg <penberg@cs.helsinki.fi> Cc: Greg KH <greg@kroah.com> Cc: Peter Osterlund <petero2@telia.com> Cc: Jens Axboe <jens.axboe@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 18 December 2007, 03:28:16 UTC |
bbd0682 | WANG Cong | 18 December 2007, 00:19:59 UTC | mm/sparse.c: improve the error handling for sparse_add_one_section() Improve the error handling for mm/sparse.c::sparse_add_one_section(). And I see no reason to check 'usemap' until holding the 'pgdat_resize_lock'. [geoffrey.levand@am.sony.com: sparse_index_init() returns -EEXIST] Cc: Christoph Lameter <clameter@sgi.com> Acked-by: Dave Hansen <haveblue@us.ibm.com> Cc: Rik van Riel <riel@redhat.com> Acked-by: Yasunori Goto <y-goto@jp.fujitsu.com> Cc: Andy Whitcroft <apw@shadowen.org> Signed-off-by: WANG Cong <xiyou.wangcong@gmail.com> Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 18 December 2007, 03:28:16 UTC |
af0cd5a | WANG Cong | 18 December 2007, 00:19:58 UTC | mm/sparse.c: check the return value of sparse_index_alloc() Since sparse_index_alloc() can return NULL on memory allocation failure, we must deal with the failure condition when calling it. Signed-off-by: WANG Cong <xiyou.wangcong@gmail.com> Cc: Christoph Lameter <clameter@sgi.com> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 18 December 2007, 03:28:16 UTC |
bd6cba5 | Dave Jones | 18 December 2007, 00:19:58 UTC | cpufreq: fix missing unlocks in cpufreq_add_dev error paths. Ingo hit some BUG_ONs that were probably caused by these missing unlocks causing an unbalance. He couldn't reproduce the bug reliably, so it's unknown that it's definitly fixing the problem he hit, but it's a fairly good chance, and this fixes an obvious bug. [ Dave: "Ingo followed up that he hit some lockdep related output with this applied, so it may not be right. I'll look at it after xmas if no-one has it figured out before then." Akpm: "It looks pretty correct to me though." ] Signed-off-by: Dave Jones <davej@redhat.com> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 18 December 2007, 03:28:16 UTC |
9548b20 | Ivan Kokshaysky | 18 December 2007, 00:19:57 UTC | alpha: build fixes This fixes some of the alpha-specific build problems, except a) modpost warning about COMMON symbol "saved_config" and b) nasty final link failure with gcc-4.x, -Os and scsi-disk driver configured built-in (due to jump table in .rodata referencing discarded .exit.text). - build failure with gcc-4.2.x: fix up casts in cia_io* routines to avoid warnings ('discards qualifiers from pointer target type'), which are failures, thanks to -Werror; - modpost warnings: add missing __init qualifier for titan and marvel; for non-generic build, move machine vectors from .data to .data.init.refok section; - unbreak CPU-specific optimization: rearrange cpuflags-y assignments so that extended -mcpu value (ev56, pca56, ev67) overrides basic one (ev5, ev6) and not vice versa. Signed-off-by: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Richard Henderson <rth@twiddle.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 18 December 2007, 03:28:16 UTC |
b47b6f3 | Andries E. Brouwer | 18 December 2007, 00:19:55 UTC | ext3, ext4: avoid divide by zero As it turns out, the kernel divides by EXT3_INODES_PER_GROUP(s) when mounting an ext3 filesystem. If that number is zero, a crash follows. Below a patch. This crash was reported by Joeri de Ruiter, Carst Tankink and Pim Vullers. Cc: <linux-ext4@vger.kernel.org> Acked-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 18 December 2007, 03:28:16 UTC |
9e2de40 | Uwe Kleine-König | 18 December 2007, 00:19:54 UTC | fs/Kconfig: grammar fix This was introduced in 4af8e944c22d8af92a7548354a9567250cc1a782 Signed-off-by: Uwe Kleine-König <Uwe.Kleine-Koenig@digi.com> Cc: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 18 December 2007, 03:28:16 UTC |
a5ee6da | Geoff Levand | 18 December 2007, 00:19:53 UTC | sparsemem: make SPARSEMEM_VMEMMAP selectable SPARSEMEM_VMEMMAP needs to be a selectable config option to support building the kernel both with and without sparsemem vmemmap support. This selection is desirable for platforms which could be configured one way for platform specific builds and the other for multi-platform builds. Signed-off-by: Miguel Botón <mboton@gmail.com> Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com> Acked-by: Yasunori Goto <y-goto@jp.fujitsu.com> Cc: Christoph Lameter <clameter@sgi.com> Cc: Andy Whitcroft <apw@shadowen.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 18 December 2007, 03:28:16 UTC |