Revision eb315d2ae614493fd1ebb026c75a80573d84f7ad authored by Al Viro on 09 June 2017, 01:15:03 UTC, committed by Al Viro on 09 June 2017, 20:28:01 UTC
Cc: stable@vger.kernel.org Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
1 parent 414cf71
watchdog_hld.c
/*
* Detect hard lockups on a system
*
* started by Don Zickus, Copyright (C) 2010 Red Hat, Inc.
*
* Note: Most of this code is borrowed heavily from the original softlockup
* detector, so thanks to Ingo for the initial implementation.
* Some chunks also taken from the old x86-specific nmi watchdog code, thanks
* to those contributors as well.
*/
#define pr_fmt(fmt) "NMI watchdog: " fmt
#include <linux/nmi.h>
#include <linux/module.h>
#include <linux/sched/debug.h>
#include <asm/irq_regs.h>
#include <linux/perf_event.h>
static DEFINE_PER_CPU(bool, hard_watchdog_warn);
static DEFINE_PER_CPU(bool, watchdog_nmi_touch);
static DEFINE_PER_CPU(struct perf_event *, watchdog_ev);
/* boot commands */
/*
* Should we panic when a soft-lockup or hard-lockup occurs:
*/
unsigned int __read_mostly hardlockup_panic =
CONFIG_BOOTPARAM_HARDLOCKUP_PANIC_VALUE;
static unsigned long hardlockup_allcpu_dumped;
/*
* We may not want to enable hard lockup detection by default in all cases,
* for example when running the kernel as a guest on a hypervisor. In these
* cases this function can be called to disable hard lockup detection. This
* function should only be executed once by the boot processor before the
* kernel command line parameters are parsed, because otherwise it is not
* possible to override this in hardlockup_panic_setup().
*/
void hardlockup_detector_disable(void)
{
watchdog_enabled &= ~NMI_WATCHDOG_ENABLED;
}
static int __init hardlockup_panic_setup(char *str)
{
if (!strncmp(str, "panic", 5))
hardlockup_panic = 1;
else if (!strncmp(str, "nopanic", 7))
hardlockup_panic = 0;
else if (!strncmp(str, "0", 1))
watchdog_enabled &= ~NMI_WATCHDOG_ENABLED;
else if (!strncmp(str, "1", 1))
watchdog_enabled |= NMI_WATCHDOG_ENABLED;
return 1;
}
__setup("nmi_watchdog=", hardlockup_panic_setup);
void touch_nmi_watchdog(void)
{
/*
* Using __raw here because some code paths have
* preemption enabled. If preemption is enabled
* then interrupts should be enabled too, in which
* case we shouldn't have to worry about the watchdog
* going off.
*/
raw_cpu_write(watchdog_nmi_touch, true);
touch_softlockup_watchdog();
}
EXPORT_SYMBOL(touch_nmi_watchdog);
static struct perf_event_attr wd_hw_attr = {
.type = PERF_TYPE_HARDWARE,
.config = PERF_COUNT_HW_CPU_CYCLES,
.size = sizeof(struct perf_event_attr),
.pinned = 1,
.disabled = 1,
};
/* Callback function for perf event subsystem */
static void watchdog_overflow_callback(struct perf_event *event,
struct perf_sample_data *data,
struct pt_regs *regs)
{
/* Ensure the watchdog never gets throttled */
event->hw.interrupts = 0;
if (atomic_read(&watchdog_park_in_progress) != 0)
return;
if (__this_cpu_read(watchdog_nmi_touch) == true) {
__this_cpu_write(watchdog_nmi_touch, false);
return;
}
/* check for a hardlockup
* This is done by making sure our timer interrupt
* is incrementing. The timer interrupt should have
* fired multiple times before we overflow'd. If it hasn't
* then this is a good indication the cpu is stuck
*/
if (is_hardlockup()) {
int this_cpu = smp_processor_id();
/* only print hardlockups once */
if (__this_cpu_read(hard_watchdog_warn) == true)
return;
pr_emerg("Watchdog detected hard LOCKUP on cpu %d", this_cpu);
print_modules();
print_irqtrace_events(current);
if (regs)
show_regs(regs);
else
dump_stack();
/*
* Perform all-CPU dump only once to avoid multiple hardlockups
* generating interleaving traces
*/
if (sysctl_hardlockup_all_cpu_backtrace &&
!test_and_set_bit(0, &hardlockup_allcpu_dumped))
trigger_allbutself_cpu_backtrace();
if (hardlockup_panic)
nmi_panic(regs, "Hard LOCKUP");
__this_cpu_write(hard_watchdog_warn, true);
return;
}
__this_cpu_write(hard_watchdog_warn, false);
return;
}
/*
* People like the simple clean cpu node info on boot.
* Reduce the watchdog noise by only printing messages
* that are different from what cpu0 displayed.
*/
static unsigned long firstcpu_err;
static atomic_t watchdog_cpus;
int watchdog_nmi_enable(unsigned int cpu)
{
struct perf_event_attr *wd_attr;
struct perf_event *event = per_cpu(watchdog_ev, cpu);
int firstcpu = 0;
/* nothing to do if the hard lockup detector is disabled */
if (!(watchdog_enabled & NMI_WATCHDOG_ENABLED))
goto out;
/* is it already setup and enabled? */
if (event && event->state > PERF_EVENT_STATE_OFF)
goto out;
/* it is setup but not enabled */
if (event != NULL)
goto out_enable;
if (atomic_inc_return(&watchdog_cpus) == 1)
firstcpu = 1;
wd_attr = &wd_hw_attr;
wd_attr->sample_period = hw_nmi_get_sample_period(watchdog_thresh);
/* Try to register using hardware perf events */
event = perf_event_create_kernel_counter(wd_attr, cpu, NULL, watchdog_overflow_callback, NULL);
/* save the first cpu's error for future comparision */
if (firstcpu && IS_ERR(event))
firstcpu_err = PTR_ERR(event);
if (!IS_ERR(event)) {
/* only print for the first cpu initialized */
if (firstcpu || firstcpu_err)
pr_info("enabled on all CPUs, permanently consumes one hw-PMU counter.\n");
goto out_save;
}
/*
* Disable the hard lockup detector if _any_ CPU fails to set up
* set up the hardware perf event. The watchdog() function checks
* the NMI_WATCHDOG_ENABLED bit periodically.
*
* The barriers are for syncing up watchdog_enabled across all the
* cpus, as clear_bit() does not use barriers.
*/
smp_mb__before_atomic();
clear_bit(NMI_WATCHDOG_ENABLED_BIT, &watchdog_enabled);
smp_mb__after_atomic();
/* skip displaying the same error again */
if (!firstcpu && (PTR_ERR(event) == firstcpu_err))
return PTR_ERR(event);
/* vary the KERN level based on the returned errno */
if (PTR_ERR(event) == -EOPNOTSUPP)
pr_info("disabled (cpu%i): not supported (no LAPIC?)\n", cpu);
else if (PTR_ERR(event) == -ENOENT)
pr_warn("disabled (cpu%i): hardware events not enabled\n",
cpu);
else
pr_err("disabled (cpu%i): unable to create perf event: %ld\n",
cpu, PTR_ERR(event));
pr_info("Shutting down hard lockup detector on all cpus\n");
return PTR_ERR(event);
/* success path */
out_save:
per_cpu(watchdog_ev, cpu) = event;
out_enable:
perf_event_enable(per_cpu(watchdog_ev, cpu));
out:
return 0;
}
void watchdog_nmi_disable(unsigned int cpu)
{
struct perf_event *event = per_cpu(watchdog_ev, cpu);
if (event) {
perf_event_disable(event);
per_cpu(watchdog_ev, cpu) = NULL;
/* should be in cleanup, but blocks oprofile */
perf_event_release_kernel(event);
/* watchdog_nmi_enable() expects this to be zero initially. */
if (atomic_dec_and_test(&watchdog_cpus))
firstcpu_err = 0;
}
}
![swh spinner](/static/img/swh-spinner.gif)
Computing file changes ...