Revision eb801c837dfa7a57e340a640e7cf8f1c8c0bed54 authored by Piotr Esden-Tempski on 13 April 2012, 23:35:22 UTC, committed by Piotr Esden-Tempski on 13 April 2012, 23:35:22 UTC
By default all lisa/m 2.0 firmware will end up at address 0x8002000 and jtag will put it there without erasing the bootloader. If you intend to not use Luftboot you have to set <configure name="NO_LUFTBOOT" value="1"/> in your airframe file. Using DFU for flashing firmware still needs to be added.
1 parent 1cb498d
File | Mode | Size |
---|---|---|
conf | ||
data | ||
debian | ||
doc | ||
src | ||
sw | ||
tests | ||
.gitignore | -rw-r--r-- | 3.8 KB |
AUTHORS | -rw-r--r-- | 1.7 KB |
BUGS | -rw-r--r-- | 116 bytes |
COPYING | -rw-r--r-- | 17.6 KB |
Doxyfile | -rw-r--r-- | 71.5 KB |
Makefile | -rw-r--r-- | 8.6 KB |
Makefile.ac | -rw-r--r-- | 6.7 KB |
Makefile.install | -rw-r--r-- | 8.3 KB |
README.md | -rw-r--r-- | 2.7 KB |
githelper.sh | -rwxr-xr-x | 7.4 KB |
pprz_src_test.sh | -rw-r--r-- | 171 bytes |
![swh spinner](/static/img/swh-spinner.gif)
Computing file changes ...