Revision ebff65473f56e6c30de928fd6a4f1ce5ae36e8c5 authored by Shawn Guo on 02 December 2013, 05:26:50 UTC, committed by Mark Brown on 02 December 2013, 11:50:53 UTC
Since devm_card_release() expects parameter 'res' to be a pointer to struct snd_soc_card, devm_snd_soc_register_card() should really pass such a pointer rather than the one to struct device. This bug causes the kernel Oops below with imx-sgtl500 driver when we remove the module. It happens because with 'card' pointing to the wrong structure, card->num_rtd becomes 0 in function soc_remove_dai_links(). Consequently, soc_remove_link_components() and in turn soc_cleanup_codec[platform]_debugfs() will not be called on card removal. It results in that debugfs_card_root is being removed while its child entries debugfs_codec_root and debugfs_platform_root are still there, and thus the kernel Oops. Fix the bug by correcting the parameter 'res' to be the pointer to struct snd_soc_card. $ lsmod Module Size Used by snd_soc_imx_sgtl5000 3506 0 snd_soc_sgtl5000 13677 2 snd_soc_imx_audmux 5324 1 snd_soc_imx_sgtl5000 snd_soc_fsl_ssi 8139 2 imx_pcm_dma 1380 1 snd_soc_fsl_ssi $ rmmod snd_soc_imx_sgtl5000 Unable to handle kernel paging request at virtual address e594025c pgd = be134000 [e594025c] *pgd=00000000 Internal error: Oops: 5 [#1] SMP ARM Modules linked in: snd_soc_imx_sgtl5000(-) snd_soc_sgtl5000 snd_soc_imx_audmux snd_soc_fsl_ssi imx_pcm_dma CPU: 0 PID: 1793 Comm: rmmod Not tainted 3.13.0-rc1 #1570 task: bee28900 ti: bfbec000 task.ti: bfbec000 PC is at debugfs_remove_recursive+0x28/0x154 LR is at snd_soc_unregister_card+0xa0/0xcc pc : [<80252b38>] lr : [<80496ac4>] psr: a0000013 sp : bfbede00 ip : bfbede28 fp : bfbede24 r10: 803281d4 r9 : bfbec000 r8 : 803271ac r7 : bef54440 r6 : 00000004 r5 : bf9a4010 r4 : bf9a4010 r3 : e5940224 r2 : 00000000 r1 : bef54450 r0 : 803271ac Flags: NzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user Control: 10c53c7d Table: 4e13404a DAC: 00000015 Process rmmod (pid: 1793, stack limit = 0xbfbec240) Stack: (0xbfbede00 to 0xbfbee000) de00: 00000000 bf9a4010 bf9a4010 00000004 bef54440 bec89000 bfbede44 bfbede28 de20: 80496ac4 80252b1c 804a4b60 bfbede60 bf9a4010 00000004 bfbede54 bfbede48 de40: 804a4b74 80496a30 bfbede94 bfbede58 80328728 804a4b6c bfbede94 a0000013 de60: bf1b5800 bef54440 00000002 bf9a4010 7f0169f8 bf9a4044 00000081 8000e9c4 de80: bfbec000 00000000 bfbedeac bfbede98 80328cb0 80328618 7f016000 bf9a4010 dea0: bfbedec4 bfbedeb0 8032561c 80328c84 bf9a4010 7f0169f8 bfbedee4 bfbedec8 dec0: 80325e84 803255a8 bee28900 7f0169f8 00000000 78208d30 bfbedefc bfbedee8 dee0: 80325410 80325dd4 beca8100 7f0169f8 bfbedf14 bfbedf00 803264f8 803253c8 df00: 7f01635c 7f016a3c bfbedf24 bfbedf18 80327098 803264d4 bfbedf34 bfbedf28 df20: 7f016370 80327090 bfbedfa4 bfbedf38 80085ef0 7f016368 bfbedf54 5f646e73 df40: 5f636f73 5f786d69 6c746773 30303035 00000000 78208008 bfbedf84 bfbedf68 df60: 800613b0 80061194 fffffffe 78208d00 7efc2f07 00000081 7f016a3c 00000800 df80: bfbedf84 00000000 00000000 fffffffe 78208d00 7efc2f07 00000000 bfbedfa8 dfa0: 8000e800 80085dcc fffffffe 78208d00 78208d30 00000800 a8c82400 a8c82400 dfc0: fffffffe 78208d00 7efc2f07 00000081 00000002 00000000 78208008 00000800 dfe0: 7efc2e1c 7efc2ba8 76f5ca47 76edec7c 80000010 78208d30 00000000 00000000 Backtrace: [<80252b10>] (debugfs_remove_recursive+0x0/0x154) from [<80496ac4>] (snd_soc_unregister_card+0xa0/0xcc) r8:bec89000 r7:bef54440 r6:00000004 r5:bf9a4010 r4:bf9a4010 r3:00000000 [<80496a24>] (snd_soc_unregister_card+0x0/0xcc) from [<804a4b74>] (devm_card_release+0x14/0x18) r6:00000004 r5:bf9a4010 r4:bfbede60 r3:804a4b60 [<804a4b60>] (devm_card_release+0x0/0x18) from [<80328728>] (release_nodes+0x11c/0x1dc) [<8032860c>] (release_nodes+0x0/0x1dc) from [<80328cb0>] (devres_release_all+0x38/0x54) [<80328c78>] (devres_release_all+0x0/0x54) from [<8032561c>] (__device_release_driver+0x80/0xd4) r4:bf9a4010 r3:7f016000 [<8032559c>] (__device_release_driver+0x0/0xd4) from [<80325e84>] (driver_detach+0xbc/0xc0) r5:7f0169f8 r4:bf9a4010 [<80325dc8>] (driver_detach+0x0/0xc0) from [<80325410>] (bus_remove_driver+0x54/0x98) r6:78208d30 r5:00000000 r4:7f0169f8 r3:bee28900 [<803253bc>] (bus_remove_driver+0x0/0x98) from [<803264f8>] (driver_unregister+0x30/0x50) r4:7f0169f8 r3:beca8100 [<803264c8>] (driver_unregister+0x0/0x50) from [<80327098>] (platform_driver_unregister+0x14/0x18) r4:7f016a3c r3:7f01635c [<80327084>] (platform_driver_unregister+0x0/0x18) from [<7f016370>] (imx_sgtl5000_driver_exit+0x14/0x1c [snd_soc_imx_sgtl5000]) [<7f01635c>] (imx_sgtl5000_driver_exit+0x0/0x1c [snd_soc_imx_sgtl5000]) from [<80085ef0>] (SyS_delete_module+0x130/0x18c) [<80085dc0>] (SyS_delete_module+0x0/0x18c) from [<8000e800>] (ret_fast_syscall+0x0/0x48) r6:7efc2f07 r5:78208d00 r4:fffffffe Code: 889da9f8 e5983020 e3530000 089da9f8 (e5933038) ---[ end trace 825e7e125251a225 ]--- Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Mark Brown <broonie@linaro.org>
1 parent 8f1ec93
Kbuild
#
# Kbuild for top-level directory of the kernel
# This file takes care of the following:
# 1) Generate bounds.h
# 2) Generate asm-offsets.h (may need bounds.h)
# 3) Check for missing system calls
#####
# 1) Generate bounds.h
bounds-file := include/generated/bounds.h
always := $(bounds-file)
targets := $(bounds-file) kernel/bounds.s
quiet_cmd_bounds = GEN $@
define cmd_bounds
(set -e; \
echo "#ifndef __LINUX_BOUNDS_H__"; \
echo "#define __LINUX_BOUNDS_H__"; \
echo "/*"; \
echo " * DO NOT MODIFY."; \
echo " *"; \
echo " * This file was generated by Kbuild"; \
echo " *"; \
echo " */"; \
echo ""; \
sed -ne $(sed-y) $<; \
echo ""; \
echo "#endif" ) > $@
endef
# We use internal kbuild rules to avoid the "is up to date" message from make
kernel/bounds.s: kernel/bounds.c FORCE
$(Q)mkdir -p $(dir $@)
$(call if_changed_dep,cc_s_c)
$(obj)/$(bounds-file): kernel/bounds.s Kbuild
$(Q)mkdir -p $(dir $@)
$(call cmd,bounds)
#####
# 2) Generate asm-offsets.h
#
offsets-file := include/generated/asm-offsets.h
always += $(offsets-file)
targets += $(offsets-file)
targets += arch/$(SRCARCH)/kernel/asm-offsets.s
# Default sed regexp - multiline due to syntax constraints
define sed-y
"/^->/{s:->#\(.*\):/* \1 */:; \
s:^->\([^ ]*\) [\$$#]*\([-0-9]*\) \(.*\):#define \1 \2 /* \3 */:; \
s:^->\([^ ]*\) [\$$#]*\([^ ]*\) \(.*\):#define \1 \2 /* \3 */:; \
s:->::; p;}"
endef
quiet_cmd_offsets = GEN $@
define cmd_offsets
(set -e; \
echo "#ifndef __ASM_OFFSETS_H__"; \
echo "#define __ASM_OFFSETS_H__"; \
echo "/*"; \
echo " * DO NOT MODIFY."; \
echo " *"; \
echo " * This file was generated by Kbuild"; \
echo " *"; \
echo " */"; \
echo ""; \
sed -ne $(sed-y) $<; \
echo ""; \
echo "#endif" ) > $@
endef
# We use internal kbuild rules to avoid the "is up to date" message from make
arch/$(SRCARCH)/kernel/asm-offsets.s: arch/$(SRCARCH)/kernel/asm-offsets.c \
$(obj)/$(bounds-file) FORCE
$(Q)mkdir -p $(dir $@)
$(call if_changed_dep,cc_s_c)
$(obj)/$(offsets-file): arch/$(SRCARCH)/kernel/asm-offsets.s Kbuild
$(call cmd,offsets)
#####
# 3) Check for missing system calls
#
always += missing-syscalls
targets += missing-syscalls
quiet_cmd_syscalls = CALL $<
cmd_syscalls = $(CONFIG_SHELL) $< $(CC) $(c_flags) $(missing_syscalls_flags)
missing-syscalls: scripts/checksyscalls.sh $(offsets-file) FORCE
$(call cmd,syscalls)
# Keep these two files during make clean
no-clean-files := $(bounds-file) $(offsets-file)
![swh spinner](/static/img/swh-spinner.gif)
Computing file changes ...